ENGINEERINGEngineering with

Business Management Programme

Engineering Science

Aerospace Electronics

Aerospace Technology

Audio-visual Technology

Automation & Mechatronic Systems

Biomedical Engineering

Clean Energy Management

Electrical Engineering

Electronic & Computer Engineering

Marine & Offshore Technology

Mechanical Engineering

Network Systems & Security

SOE

From multiple learning pathways to overseas exposure, real-world projects to enhanced internships, prestigious scholarships to development programmes, you’ll find engineering with that something xtra at Ngee Ann Polytechnic’s School of Engineering (SoE)!

Engineeringwith that

something xtra!

SCHOOL OF ENGINEERING10ENGINEERING WITH BUSINESSMANAGEMENT PROGRAMME N7113ENGINEERING SCIENCE N9317AEROSPACE ELECTRONICS N7521AEROSPACE TECHNOLOGY N6526AUDIO-VISUAL TECHNOLOGY N7631AUTOMATION & MECHATRONIC SYSTEMS N5036BIOMEDICAL ENGINEERING N6040CLEAN ENERGY MANAGEMENT N8444ELECTRICAL ENGINEERING N4349ELECTRONIC & COMPUTER ENGINEERING N4454MARINE & OFFSHORE TECHNOLOGY N4258MECHANICAL ENGINEERING N4162NETWORK SYSTEMS & SECURITY N64

03SCHOOL OF ENGINEERING

ENGINEERINGPATHWAY

ENGINEERING WITHBUSINESS MANAGEMENT

Choose this if you have decided on a particular engineering course.

• Choose from 12 engineering diplomas• Many exciting specialisations in your second or third year

Choose this if you haven’t decided on an engineering course or if you prefer an engineering curriculum with business modules.

• Choose from 9 engineering diplomas• Only pick your core engineering discipline towards the end of your first semester• Up to 25% business management curriculum• Business management modules offered by the School of Business & Accountancy

Graduate with an Engineering Diploma! Graduate with an Engineering Diploma +Minor in Business Management!

* Not applicable for Engineering Science, Clean Energy Management and Network Systems & Security students.

OPTION TO SWITCH PATHWAYS AFTER THE FIRST SEMESTER*

Plus, some diplomas such as Electrical Engineering, Electronic & Computer Engineering and Mechanical Engineering offer up to 8 specialisation options to cater to different interests.

But if you are still not sure which engineering discipline best suits you, fret not. Our special programme – Engineering with Business Management (EBM) – will let you have a taste ofthe various disciplines for about a semester before you make your choice. And the best part?Thanks to the way the SoE curriculum is structured, you can switch paths along the way –it is that flexible!

PATHWAYSLEARNINGMULTIPLE

At SoE, you’ll be spoilt for choice as there are as many as 12 engineering diplomas and one special programme for you to pick from.

05SCHOOL OF ENGINEERING

SERVICE-LEARNINGDesign and develop engineering solutions that benefit society and make classroom learning more purposeful. For example, students worked with Lions Befrienders to create the NP RoboCoach, which assists elderly in keeping fit.

Besides multiple learning pathways, SoE also offers many exciting learning opportunities to maximise your potential. But don’t take our word for it – check out what our students have done and where they’ve been!

With the diversity and versatility that SoE offers, you can expectlimitless possibilities and a journey with that something xtra.

CLASSROOMBEYOND THE

INTERNSHIPGain valuable real-world

experience through internships.

OVERSEAS EXPOSUREBroaden your horizons through study trips to reputable overseas universities and site

visits hosted by industry experts.

INDUCTION PROGRAMMESParticipate in induction programmes that include industry visits and engagingclassroom activities.

UNIVERSITY RESEARCHWork with professors from NUS, NTU and SUTD on real-world projects in areas like artificial intelligence and photonics.

07

TRAOUR GRADUATESWITH THAT SOMETHINGXHere’s how you can stand out from the crowd of

engineering graduates. Sign up for a Diploma Plus Programme (DPP) to build on the knowledge and skills gained from your diploma. Spanning both engineering and non-engineering fields, the DPP better preparesyou for university and the working world.

You can opt to take up one of these DPP clusters:-- Advanced Engineering Mathematics-- Applied Physics-- Aviation Fundamentals-- Biomedical Engineering-- Business-- Computer-aided Design Skills-- Computer & Communication Systems-- Industrial Control-- Language (French)-- Language (Japanese)-- Language (Korean)-- Mechatronics Application Skills-- Satellite Technology -- Stage Management & Technology-- Workplace Safety & Health

Enhanced InternshipYou can look forward to longer and more structured internships, as NP continues to collaborate with industry partners to provide more effective on-the-job training. Enhanced internships have been rolled out for all of our courses. Part of the national SkillsFuture Initiative, this programme allows you to better apply the skillsyou have learnt in the classroom to the workplace.

Earn and Learn ProgrammeYou can join the Earn and Learn Programme to get a head start in your career. A work-study programme, you will be matched with a company and undergo structured on-the-job training, and obtain an industry-recognised certification, such as the Specialist Diploma in Electrical Design and Operation, as well as the Specialist Diploma in Marine Production from NP.

SKILLSFUTURE INITIATIVES

“I hope to inspireothers to discover what they love and give their all to it, because that turns work into play and success will follow. I took up the NP Engineering Scholarship because I truly want to pursue this line of work and contribute positively to those around me.”

Jarrod LimThird-year Engineering Science studentand NP Engineering Scholarship recipient

NP ENGINEERINGSCHOLARSHIP

DIPLOMA PLUS

SCHOOL OF ENGINEERING

The YoungResearcherZenas LimEngineering Science graduateClass of 2015

Zenas’ passion for research deepened when he worked with experts at A*STAR’s Data Storage Institute on his final-year project. His team’s project eventually won the top prize in NP under the Polytechnic Student Research Programme in 2015. As the most outstanding NP graduate of his cohort, Zenas was awarded the Ngee Ann Kongsi Gold Medal. He also clinched the Lee Kuan Yew Award. He has secured a Defence Science and Technology Agency scholarship and a place to pursue a Masters in Electrical and Electronic Engineering in Imperial College London.

The Math andScience WhizVhora Shrayans SureshMechanical Engineering graduateClass of 2016

A strong interest in physics and math, coupled with inspiration he got from the movie The Aviator and the keenness to study how machines were made, propelled Shrayans to take up the Mechanical Engineering course in NP. While in NP, he served as the President of Rangers, a selected group of student ambassadors from SoE. He also credits his great memories in NP to his encouraging supervisors. Shrayans has been offered to read Mechanical Engineering at NTU and NUS and aims to work in the field before coming back to NP as a lecturer.

SCHOOL OF ENGINEERING

Our prestigious Engineering Scholarship is open to all SoE freshmen and offers a host of benefits:• Bond-free• Tuition fees waived• $1,200 notebook allowance• Customised talent development programme• Immersion programme or project with research institutes and top universities

09SCHOOL OF ENGINEERING

The Renaissance EngineerPavatharani Senthil KumarAerospace Technology graduateClass of 2016

From young, Pavatharani has always wanted to be a pilot and was curious how aircraft worked. In fact, tinkering with toys by taking them apart and fixing them afterward was something that came naturally to her. Undeterred by gender norms, she aspires to be one of the rare female leaders in the aerospace industry and intends to make the industry more eco-friendly. She has accepted an offer to read the prestigious Renaissance Engineering Programme at Nanyang Technological University, under the Renaissance Engineering Programme Scholarship.

The Top HonchoAlfred Heng Wee LoonElectrical Engineering graduateClass of 2003

Armed with an electrical engineering background, Alfred is now the General Manager of Meiden Singapore Switchgear Plant. Besides driving the business at the top, he is also passionate about providing opportunities for NP students to learn and grow in the field. Be it through the SkillsFuture Earn and Learn Programme, internship or mentorship programme, he is giving it his utmost support. He sees this as a way of giving back to NP. After all, he had experienced failure before and was given the second chance to bloom in NP, where he topped his cohort and went on to excel in the field of electrical engineering.

The AerospaceDesignerJonathan YongMechatronic Engineering graduateClass of 2004

While at NP, Jonathan had all the makings of a successful inventor. He won a silver award at the prestigious Tan Kah Kee Young Inventors Award for his unmanned aerial vehicle. As the top student ofhis course, Jonathan secured a Defence Science & Technology scholarship to pursue a degree at the University of Illinois at Urbana Champaign. In his final year at the university, he was awarded the National Scholarship from the American Institute of Aeronautics and Astronautics and subsequently graduated with top honours in Aerospace Engineering. Jonathan later earned a Masters in Aerospace Systems Engineering. Jonathan is now working as a Senior Research Engineer and UAV test pilot for DSO National Laboratories.

The IT Security Specialist Wong Kee HuiNetwork Systems & Security graduateClass of 2016

Kee Hui’s passion for computer games spurred him to enrol in the Nitec course in Info-Communications Technology, where he realised his potential in the network systems field. His good results in ITE eventually earned him a spot in NP. He continued to shine in NP and was awarded the Tay Eng Soon Gold Medal upon graduation. Even though he has secured a place in Nanyang Technological University to read Computer Science, Kee Hui is also considering working in the field first and taking up certification courses to become an IT security specialist. He is, after all, a true believer in the unconventional route!

21

N65DIPLOMA IN

AEROSPACE TECHNOLOGY

• A strong focus on aerospace design and manufacture of aircraft components• Curriculum aligned to CAAS Airworthiness Requirements gives you a head start in getting your licence as an Aircraft Maintenance Engineer• Diploma Plus Programme in Aviation Fundamentals to give you an extra edge in getting your Private Pilot Licence• A Minor in Business Management offers more exciting career and degree opportunities• Immersive learning experience at our Aerospace Hub

DIPLOMA IN AEROSPACE TECHNOLOGY

With more than 100 aerospace companies serving global and regional markets based in Singapore, you can take your pick from jobs in areas such as research and development, sales and marketing, engineering, and maintenance and support.

AE will also prepare you for modules in the Civil Aviation Authority of Singapore (CAAS) Airworthiness Requirements (SAR 66) examinations so you can get your Aircraft Maintenance Engineer’s licence much sooner! You can even consider a career as a pilot as our curriculum is aligned to the Air Transport Pilot License (ATPL) ground examinations requirement.

As part of the SkillsFuture initiative, you can alsoenrol in various skills-deepening programmes orapply for an Earn and Learn Programme,if applicable, upon graduation.

As an AE graduate, you will be able to pursue an avionics or aerospace-related degree at the Singapore Institute of Technology, Singapore University of Social Sciences, Embry-Riddle Aeronautical University (Asia, Singapore) or overseas universities in Australia, New Zealand, USA and UK.

Or you can choose to pursue electrical, electronics and related engineering degrees with advanced standing at prestigious local universities like National University of Singapore, Nanyang Technological University, and Singapore University of Technology and Design.

FURTHER STUDIES

AGGREGATE TYPE ELR2B2-CTo be eligible for consideration, candidates musthave the following GCE ‘O’ Level examination(or equivalent) results.

ENTRY REQUIREMENTS

CONTACT USFor the most up-to-date information on NP’sDiploma in Aerospace Electronics and itsmodules, log on to www.np.edu.sg/ae

CAREER

You must also fulfil the aggregate computation requirements.

* Candidates with English as a second language must have attained a minimum grade of 6.

Candidates with hearing deficiency or severe vision deficiency including colour vision deficiency shouldnot apply for the course. Related Courses-- Aerospace Technology-- Automation & Mechatronic Systems-- Electrical Engineering-- Electronic & Computer Engineering-- Engineering with Business Management-- Mechanical Engineering

SUBJECT ‘O’ LEVEL GRADE

English Language* 1-7Mathematics (Elementary/Additional) 1-6Science (with Physics, Chemistry or 1-6Biology component)or Biotechnologyor Computer Studiesor Design & Technologyor Fundamentals of Electronics

23

Growing up,you were always the kid building toy planes out of Lego blocks. Everyone knew about your fascination with “winged” vessels. Take your passion to greater heights now with the Diploma in Aerospace Technology (AT)!

In AT, you will gain a strong engineering foundation with a focus on major aerospace disciplines. In the first two years, we will strengthen your engineering knowledge with modules such as Engineering Mathematics, Engineering Mechanics and Engineering Design Analysis to prepare you for the core aerospace modules in the later semesters. With our strong emphasis on design thinking, you will gain an edge in jobs that involve creating innovative solutions. You can apply your design skills in harnessing clean energy and developing new materials as well as aerospace components. You will also learn the fundamentals of aerospace technology, manufacturing and maintenance, and aircraft structures and systems.

In your final year, you can pick one of our three specialisation options (Aerospace Design, Aviation Management and Maintenance Repair & Overhaul) that will build on your aerospace foundation and area of interest. You will also go on a six-month local or overseas internship with companies such as Airbus Helicopters, Rolls-Royce, Pratt & Whitney and ST Aerospace to get real-world industry exposure.

Interested in the Private Pilot Licence (PPL) basic flying course? As an AT student, you can take up a Diploma Plus Programme in Aviation Fundamentals whichoffers modules that complement the PPL course!

Minor in Business Management This Diploma offers an alternative pathway for those who prefer to read more business modules. In Year 2, you can sign up for our Minor in Business Management. The modules, taught by our School of Business & Accountancy, include financial management, marketing and entrepreneurship. You will also get to work on a project with business application.

WHAT THECOURSE IS ABOUT

Aerospace DesignYou will gain design knowledge and computational skills to perform higher order engineering tasks and applications for the aerospace industry.

Aviation ManagementYou will learn about airport operations, aviation network planning and management.

Maintenance, Repair & OverhaulThis specialisation will equip you with technical and management knowledge of aircraft maintenance.

SPECIALISATIONOPTIONS

“Aerospace Technology taught me that complex problems can be broken into simple problems. This principle was essential to the building of my company, Eezee Pte Ltd.”

Jasper YapAT graduate, Class of 2017

YEAR 2-- Aircraft Electronics-- Aircraft Structures & Systems 1-- Applied Mechanics-- Engineering Design Analysis-- Engineering Design Thinking & Practice-- Engineering Materials-- Engineering Mathematics 3-- Mechanics of Flight-- Strength of Materials-- Thermofluid 2-- Career & Professional Preparation II

Business Management Modules-- Fundamentals of Financial Management-- Marketing Fundamentals-- Business & the Economy^-- Effective People Management^

AT with Minor in Business Management

YEAR 1-- Aerospace Manufacturing & Maintenance Practices-- Fundamentals of Aerospace Technology-- Computer Programming-- Electrical Technology-- Engineering Design Drafting-- Engineering Mathematics 1 & 2-- Engineering Mechanics-- Thermofluid 1-- Career & Professional Preparation I-- Communication & Contemporary Issues^-- Innovation Toolkit^-- Sports & Wellness^

WHAT YOU WILL LEARN

YEAR 2-- Aerospace Design Practice-- Aircraft Structures & Systems 1-- Avionics Systems-- Applied Mechanics-- Computer Aided Design & Manufacturing-- Engineering Design Analysis-- Engineering Design Thinking-- Engineering Materials-- Engineering Mathematics 3-- Mechanics of Flight-- Strength of Materials-- Thermofluid 2-- Career & Professional Preparation II-- Any two IS electives^

AT

YEAR 1-- Aerospace Manufacturing & Maintenance Practices-- Fundamentals of Aerospace Technology-- Computer Programming-- Electrical Technology & Electronics-- Engineering Design Drafting-- Engineering Mathematics 1 & 2-- Engineering Mechanics-- Thermofluid 1-- Career & Professional Preparation I-- Communication & Contemporary Issues^-- Innovation Toolkit^-- Sports & Wellness^

DIPLOMA IN AEROSPACE TECHNOLOGY

25

AT with Minor in Business Management

YEAR 3-- Aerospace Materials & Processes-- Aircraft Propulsion Systems-- Aircraft Structures & Systems 2-- Avionics Systems-- Human Factors-- Six-month Internship or Aerospace System Design-- World Issues: A Singapore Perspective^-- Any one IS elective^

Business Management Modules-- Business Management Elective (Choose one) • Managing Service Operations • Supply Chain Management • Understanding Buyer Behaviour-- Project Design & Business Application 1 & 2 (for project track only)-- Starting & Managing an Enterprise

WHAT YOU WILL LEARN

AT

YEAR 3-- Aircraft Propulsion Systems-- Aircraft Structures & Systems 2-- System Dynamics & Control-- Human Factors-- Six-month Internship-- World Issues: A Singapore Perspective^-- Any one IS elective^

Choose one of the following Specialisation Options:

Aerospace Design-- Aerospace Computational Analysis-- Aerospace Computational Design-- Aerospace Computational Simulation

Aviation Management-- Airport Operations-- Aviation Business & Management-- Aviation Safety & Management

Maintenance, Repair & Overhaul-- Aerospace Materials & Processes-- Airworthiness Legislation-- Quality System & Manufacturing Management

^ Interdisciplinary Studies (IS) modules are taken on top of core discipline modules and account for up to 18 hours of the course curriculum. They comprise prescribed modules in areas such as communication, innovation and cultural intelligence as well as elective modules in the categories of arts & humanities, business, design and science & technology.

With the growth of the local and global aerospace industry, the expansion and development of new airports and the continued growth of Singapore’s Seletar Aerospace Park, there is a strong demandfor skilled aerospace professionals. AT is recognisedby many established aerospace organisations, which gives you an advantage when exploring such careers.You can look forward to being employed in the various aerospace industries such as maintenance, repair and operations, design and development, technical sales, aero-engine/systems services and airline/airport operations.

What’s more, AT prepares you for modules in the Civil Aviation Authority of Singapore (CAAS) Airworthiness Requirements (SAR 66) examinations so you get a head start in acquiring your licence as an Aircraft Maintenance Engineer.

As part of the SkillsFuture initiative, you could also enrol in various skills-deepening programmes in the Aerospace Sector such as the Specialist Diploma in Aircraft Maintenance and Engineering and Foundational Degree in Aircraft Engineeringthat are in line with the SAR66 requirements.

As an AT graduate, you may be offered advanced standing from local and overseas universities.They include:

-- Nanyang Technological University • Bachelor of Engineering in Aerospace, Mechanical or Materials Engineering-- National University of Singapore • Bachelor of Engineering in Mechanical, Electrical or Computer Engineering-- Imperial College of London (UK) • Master of Engineering in Aeronautical Engineering-- University of Manchester (UK) • Bachelor of Engineering in Aerospace or Aeronautical Engineering-- University of Sheffield (UK) • Bachelor of Engineering in Aerospace or Aeronautical Engineering-- University of New South Wales (Australia) • Bachelor of Engineering in Mechanical & Manufacturing Engineering-- University of Queensland (Australia) • Bachelor of Engineering in Aerospace Engineering

FURTHER STUDIES

AGGREGATE TYPE ELR2B2-CTo be eligible for consideration, candidates musthave the following GCE ‘O’ Level examination(or equivalent) results.

ENTRY REQUIREMENTS

CONTACT USFor the most up-to-date information on NP’sDiploma in Aerospace Technology and its modules, log on to www.np.edu.sg/at

CAREER

You must also fulfil the aggregate computation requirements.

* Candidates with English as a second language must have attained a minimum grade of 6.

Candidates with hearing deficiency or severe vision deficiency including colour vision deficiency shouldnot apply for the course. Related Courses-- Automation & Mechatronic Systems-- Electrical Engineering-- Electronic & Computer Engineering-- Engineering with Business Management-- Mechanical Engineering

SUBJECT ‘O’ LEVEL GRADE

English Language* 1-7Mathematics (Elementary/Additional) 1-6Science (with Physics, Chemistry or 1-6Biology component)or Biotechnologyor Computer Studiesor Design & Technologyor Fundamentals of Electronics

-- University of Glasgow (UK) & Singapore Institute of Technology • Bachelor of Engineering in Aeronautical, Electrical Power, Mechanical Design or Mechatronics Engineering

You can also apply for non-engineering degree courses. The Minor in Business Management will give you a head start when applying for such courses.

DIPLOMA IN AEROSPACE TECHNOLOGY