Just KissesDesigned by Elise Lea for RKwww.robertkaufman.com

Featuring

DINOSAUR WALK

For questions about this pattern, please email Patterns@RobertKaufman.com.

Finished quilt measures: 75” x 81”

page 2

Fabric and Supplies Needed

Color Fabric Name/SKU Yardage

AYKD-18267-48 JUNGLE

AYKD-18264-286 WILD

AYKD-18263-286 WILD

K001-1082 COCOA

K001-1045 BROWN

Color Fabric Name/SKU Yardage

Fabric amounts based on yardage that is 42” wide.

A

B

C

D

E

1 yard (one

complete panel)

3/4 yard

1 yard

2-1/4 yard

2-1/8 yard

5/8 yard

Copyright 2018, Robert KaufmanFor individual use only - Not for resale

You will also need:5 yards for backing

- Read through all of the instructions before beginning.- All of the seam allowances are 1/4” unless otherwise noted.- Press seam allowances open unless otherwise noted. - Width of fabric (WOF) is equal to at least 42” wide.- Right sides together has been abbreviated to RST.- Remember to measure twice and cut once!

Notes Before You Begin

K001-1045 BROWN

*Also used for Fabric C

Binding*

page 3

From Fabric A, fussy cut:one 34-1/2” x 40-1/2” center panel

From Fabric B, cut:four 2-1/2” x WOF strips. Sew together, end-to-end, then trim: two 2-1/2” x 44-1/2” side inner borders two 2-1/2” x 34-1/2” top/bottom inner bordersseven 2” x WOF strips. Sew together, end-to-end, then trim: two 2” x 70” side middle borders two 2” x 65-1/2” top/bottom middle borders

From Fabric C, cut:four 5” x WOF strips. Subcut: twenty-eight of Template 1 four 2-1/2” x WOF strips. Subcut: eighty-four of Template 2

From Fabric D, cut:five 6-1/2” x WOF strips. Subcut: twenty-eight 6-1/2” squarestwo 3-3/4” x WOF strips. Subcut: four 3-3/4” x 12-1/2” rectanglestwo 3” x WOF strips. Subcut: six 3” x 12-1/2” rectanglesthree 2-1/2” x WOF strips. Subcut: eight 2-1/2” x 12-1/2” rectanglesthree 2-1/2” x WOF strips. Subcut: fifty-six of Template 2two 2-1/2” x WOF strips. Subcut: twenty-eight of Template 3 twenty-eight of Template 3-Reversedtwo 5” x WOF strips. Subcut: twenty-eight of Template 4 twenty-eight of Template 4-Reversed

From Fabric E, cut:two 5-1/2” x length of fabric strips. Subcut: two 5-1/2” x 71-1/2” side outer borders From the remaining width of fabric, cut: five 5-1/2” x WOF strips. Sew together, end-to-end, then trim: two 5-1/2” x 75-1/2” top and bottom outer borders From the Binding Fabric, cut:eight 2-1/2” x WOF strips

Cutting Instructions

page 4

Step 1: Sew the Fabric B top and bottom inner borders to the quilt center. Press toward the borders. Sew the Fabric B side inner borders to the sides of the quilt center. Press toward the borders.

Step 2: Sew a Template 4 and Template 4-Reversed piece to opposite angled edges of a Template 1 piece, as shown. Press. Repeat to make twenty-eight like this.

Assemble the Quilt Center

Assemble the Footprint Blocks

Step 3: Gather:three Fabric C/Template 2 piecestwo Fabric D/Template 2 piecesone Fabric D/Template 3 pieceone Fabric D/Template 3-Reversed piece

Arrange to form a row, as shown. Sew together, using the notches on the templates to align the triangles. Press. Repeat to make twenty-eight like this.

Step 4: Sew a completed Step 2 unit to the bottom edge of a completed Step 3 unit. Press. Repeat to make twenty-eight Footprint Blocks, each measuring 6-1/2” square.

Step 5: Gather two Footprint Blocks and two 6-1/2” Fabric D squares. Sew together to form a four-patch, pressing the seams away from the Footprint blocks. Repeat to make fourteen like this.

page 5

Step 6: Gather three completed Step 5 Footprint Units and four 2-1/2” x 12-1/2” Fabric D rectangles. Sew together to form a column, as shown. Press toward the rectangles. Repeat to make a second column.

Step 7: Gather four completed Step 5 Footprint Units, three 3” x 12-1/2” Fabric D rectangles and two 3-3/4” x 12-1/2” Fabric D rectangles. Sew together to form a row, as shown. Press toward the rectangles. Repeat to make a second row.

page 6

Assemble the Quilt

Step 8: Sew the side footprint borders (from Step 6) to the sides of the quilt center. Press toward the quilt center. Sew the top and bottom footprint borders (from Step 7) to the quilt center. Press toward the quilt center. Note: Pay close attention to the footprint orientation in the Quilt Assembly Diagram.

Step 9: Sew the Fabric B side middle borders to the sides of the quilt center. Press toward the borders. Sew the Fabric B top and bottom middle borders to the quilt center. Press toward the borders.

Step 10: Sew the Fabric E side outer borders to the sides of the quilt center. Press toward the borders. Sew Fabric E the top and bottom outer borders to the quilt center. Press toward the borders.

Your quilt top is complete. Baste, quilt, bind and enjoy!

page 7

Templates

Print at 100%. Check size printed correctly using 1” box for scale prior to cutting fabric.

This pattern may be used for personal purposes only and may not be reproduced in any form without the express permission from Robert Kaufman Fabrics. This pattern is not for resale. All patterns, unless otherwise attributed, are © Robert Kaufman Co., Inc. 2005-2018. All rights reserved.

1” box for scale

DINOSAUR WALKTEMPLATE 1

DINOSAUR WALKTEMPLATE 2

DINOSAUR WALKTEMPLATE 3

DINOSAUR WALKTEMPLATE 4