ICS 77.140.75

Präzisionsstahlrohre – Technische Lieferbedingungen –Teil 5: Geschweißte und maßumgeformte Rohre mitquadratischem oder rechteckigem Querschnitt

European Standard EN 10305-5 : 2003 has the status of a DIN Standard.

A comma is used as the decimal marker.

National forewordThis standard has been prepared by ECISS/TC 29 ‘Steel tubes and fittings for steel tubes’ (Secretariat: Italy).The responsible German body involved in the preparation of this standard was the Normenausschuss Eisenund Stahl (Steel and Iron Standards Committee), Technical Committee Präzisionsstahlrohre.DIN V 17006-100 is the standard corresponding to CEN Technical Report CR 10260 referred to in clause 2of the EN.

AmendmentsDIN 2395-1 and DIN 2395-2, September 1994 editions, have been superseded by the specifications ofEN 10305-5.

Previous editionsDIN 2395-1: 1981-08, 1994-09; DIN 2395-2: 1981-08, 1994-09.

National Annex NAStandard referred to(and not included in Normative references and Bibliography)

DIN V 17006-100 Designation systems for steel – Additional symbols for steel names

Ref. No. DIN EN 10305-5 : 2003-08English price group 12 Sales No. 1112

12.03

DEUTSCHE NORM August 2003

EN 10305-5{

EN comprises 21 pages.

© No part of this standard may be reproduced without the prior permission ofDIN Deutsches Institut für Normung e.V., Berlin. Beuth Verlag GmbH, 10772 Berlin, Germany,has the exclusive right of sale for German Standards (DIN-Normen).

Steel tubes for precision applications –Technical delivery conditions

Part 5: Welded and cold sized square and rectangular tubesEnglish version of DIN EN 10305-5

Supersedes DIN 2395-1 andDIN 2395-2, September 1994editions.

--`,,,,,,,``,``,,,,``,``,,`,,,-`-`,,`,,`,`,,`---

--`,,,,,,,``,``,,,,``,``,,`,,,-`-`,,`,,`,`,,`---

April 2003

English version

ICS 77.140.75

Management Centre: rue de Stassart 36, B-1050 Brussels

European Committee for StandardizationComité Européen de NormalisationEuropäisches Komitee für Normung

Steel tubes for precision applications –Technical delivery conditions

Part 5: Welded and cold sized square and rectangular tubes

© 2003. CEN – All rights of exploitation in any form and by any meansreserved worldwide for CEN national members.

Ref. No. EN 10305-5 : 2003 E

Tubes de précision en acier – Condi-tions techniques de livraison –Partie 5: Tubes soudés et calibrés desection carrée ou rectangulaire

Präzisionsstahlrohre – TechnischeLieferbedingungen – Teil 5: Ge-schweißte und maßumgeformte Rohremit quadratischem oder rechtecki-gem Querschnitt

This European Standard was approved by CEN on 2003-02-14.CEN members are bound to comply with the CEN/CENELEC Internal Regulationswhich stipulate the conditions for giving this European Standard the status of anational standard without any alteration.Up-to-date lists and bibliographical references concerning such national stand-ards may be obtained on application to the Management Centre or to any CENmember.The European Standards exist in three official versions (English, French, German).A version in any other language made by translation under the responsibility of aCEN member into its own language and notified to the Management Centre hasthe same status as the official versions.CEN members are the national standards bodies of Austria, Belgium, the CzechRepublic, Denmark, Finland, France, Germany, Greece, Hungary, Iceland,Ireland, Italy, Luxembourg, Malta, the Netherlands, Norway, Portugal, Slovakia,Spain, Sweden, Switzerland, and the United Kingdom.

ÈÉË

EN 10305-5

--`,,,,,,,``,``,,,,``,``,,`,,,-`-`,,`,,`,`,,`---

Page 2EN 10305-5 : 2003

--`,,,,,,,``,``,,,,``,``,,`,,,-`-`,,`,,`,`,,`---

Page 3EN 10305-5 : 2003

--`,,,,,,,``,``,,,,``,``,,`,,,-`-`,,`,,`,`,,`---

Page 4EN 10305-5 : 2003

--`,,,,,,,``,``,,,,``,``,,`,,,-`-`,,`,,`,`,,`---

Page 5EN 10305-5 : 2003

--`,,,,,,,``,``,,,,``,``,,`,,,-`-`,,`,,`,`,,`---

Page 6EN 10305-5 : 2003

--`,,,,,,,``,``,,,,``,``,,`,,,-`-`,,`,,`,`,,`---

Page 7EN 10305-5 : 2003

--`,,,,,,,``,``,,,,``,``,,`,,,-`-`,,`,,`,`,,`---

Page 8EN 10305-5 : 2003

--`,,,,,,,``,``,,,,``,``,,`,,,-`-`,,`,,`,`,,`---

Page 9EN 10305-5 : 2003

--`,,,,,,,``,``,,,,``,``,,`,,,-`-`,,`,,`,`,,`---

Page 10EN 10305-5 : 2003

--`,,,,,,,``,``,,,,``,``,,`,,,-`-`,,`,,`,`,,`---

Page 11EN 10305-5 : 2003

--`,,,,,,,``,``,,,,``,``,,`,,,-`-`,,`,,`,`,,`---

Page 12EN 10305-5 : 2003

--`,,,,,,,``,``,,,,``,``,,`,,,-`-`,,`,,`,`,,`---

Page 13EN 10305-5 : 2003

--`,,,,,,,``,``,,,,``,``,,`,,,-`-`,,`,,`,`,,`---

Page 14EN 10305-5 : 2003

--`,,,,,,,``,``,,,,``,``,,`,,,-`-`,,`,,`,`,,`---

Page 15EN 10305-5 : 2003

--`,,,,,,,``,``,,,,``,``,,`,,,-`-`,,`,,`,`,,`---

Page 16EN 10305-5 : 2003

--`,,,,,,,``,``,,,,``,``,,`,,,-`-`,,`,,`,`,,`---

Page 17EN 10305-5 : 2003

--`,,,,,,,``,``,,,,``,``,,`,,,-`-`,,`,,`,`,,`---

Page 18EN 10305-5 : 2003

--`,,,,,,,``,``,,,,``,``,,`,,,-`-`,,`,,`,`,,`---

Page 19EN 10305-5 : 2003

--`,,,,,,,``,``,,,,``,``,,`,,,-`-`,,`,,`,`,,`---

Page 20EN 10305-5 : 2003

--`,,,,,,,``,``,,,,``,``,,`,,,-`-`,,`,,`,`,,`---

Page 21EN 10305-5 : 2003

--`,,,,,,,``,``,,,,``,``,,`,,,-`-`,,`,,`,`,,`---