DIN11851

Unions suitable for imperial and metric tube.

DIN 11851 IMPERIAL UNIONS 1” - 4”

DIN ROUND NUT (4 SLOTS) 304 SIZE A B C D E INCH (DIN) 1” (25) 63.00 36.00 21.00 56.00 52.001.1/2” (40) 78.00 49.00 21.00 70.00 65.00 2” (50) 92.00 62.00 22.00 84.00 78.002.1/2” (65) 112.00 80.00 25.00 102.00 95.00 3” (80) 127.00 94.00 30.00 117.00 110.00 4” (100) 148.00 115.00 31.00 138.00 130.00

DIN IMPERIAL WELD MALE 316 SIZE A B C D E F 1” 25.65 22.20 26.00 29.00 7.00 52.001.1/2” 38.35 34.90 38.00 33.00 7.00 65.00 2” 51.05 47.60 50.00 35.00 7.00 78.002.1/2” 63.75 60.30 66.00 40.00 8.00 95.00 3” 76.45 73.00 81.00 45.00 8.00 110.00 4” 101.85 97.60 100.00 54.00 10.00 130.00

DIN IMPERIAL WELD LINER 316SIZE A B C D E F 1” 22.20 25.65 35.00 26.00 44.00 22.001.1/2” 34.90 38.35 48.00 38.00 56.00 26.00 2” 47.60 51.05 61.00 50.00 68.00 28.002.1/2” 60.30 63.75 79.00 66.00 86.00 32.00 3” 73.00 76.45 93.00 81.00 100.00 37.00 4” 97.60 101.85 114.00 100.00 121.00 44.00

DIN JOINT RING - PERBUNAN, EPDM, VITON, PTFE. SIZE A B C INCH (DIN) 1” (25) 5.00 30.00 40.001.1/2” (40) 5.00 42.00 52.00 2” (50) 5.00 54.00 64.002.1/2” (65) 5.00 71.00 81.00 3” (80) 5.00 85.00 95.00 4” (100) 6.00 104.00 114.00

DIN BLANK CAP 316, 316L

SIZE A B C D INCH (DIN) 1” (25) 44.00 35.00 13.00 10.001.1/2” (40) 56.00 48.00 13.00 10.00 2” (50) 68.00 61.00 14.00 11.002.1/2” (65) 86.00 79.00 16.00 12.00 3” (80) 100.00 93.00 16.00 12.00 4” (100) 121.00 114.00 20.00 15.00

-11-

DIN BLANK NUT & CHAIN 304 SIZE A B C INCH (DIN) 1” (25) 63.00 21.00 56.001.1/2” (40) 78.00 21.00 70.00 2” (50) 92.00 22.00 84.002.1/2” (65) 112.00 25.00 102.00 3” (80) 127.00 30.00 117.00 4” (100) 148.00 31.00 138.00

DIN 11851 METRIC DN10 - DN32

DIN ROUND NUT (4 SLOTS) 304 SIZE A B C D E DN10 38.00 19.00 18.00 33.00 28.00 DN15 44.00 25.00 18.00 38.00 34.00 DN20 54.00 31.00 21.00 48.00 44.00 DN32 70.00 42.00 21.00 62.00 58.00

DIN METRIC WELD MALE 304, 316 SIZE A B C D E DN10 15.00 10.00 21.00 4.00 28.00 DN15 19.00 16.00 21.00 4.00 34.00 DN20 23.00 20.00 24.00 6.00 44.00 DN32 37.00 32.00 32.00 7.00 58.00

DIN METRIC WELD LINER 304, 316 SIZE A B C D E DN10 10.00 15.00 18.00 22.00 17.00 DN15 16.00 21.00 24.00 28.00 17.00 DN20 20.00 23.00 30.00 36.00 18.00 DN32 32.00 35.00 41.00 50.00 25.00

DIN JOINT RING - PERBUNAN, EPDM, VITON , PTFE

SIZE A B C

DN10 4.50 12.00 24.00

DN15 4.50 18.00 26.00

DN20 4.50 23.00 33.00

DN32 5.00 36.00 46.00

DIN SPANNER

ALL DIN METRIC FITTINGS AND DIN 11864 ASEPTIC FITTINGS AVAILABLE ON REQUEST.

SIZE ADIN 10 - 15 175DIN 25 - 50 250

DIN 65 - 100 290