Upload
hans-jones
View
215
Download
0
Embed Size (px)
Citation preview
7/28/2019 Dim x Features
http://slidepdf.com/reader/full/dim-x-features 1/5
imagine if you ……….
did NOT need paper drawings ?waiting for any drawings to arrive these days can be nerve wracking as thedeadline approaches to produce an estimate/BQ. Getting paper drawings takesmuch longer & revisions often are NOT marked up properly.
did NOT need to purchase an expensive A0 digitiser ?the current cost of an A0 digitiser (old technology) is about double the cost of
software that can measure for you. A digitiser does NOT measure for you andoccupies a large space & is not portable.
did NOT need to spend thousands on CAD software ?why spend ANY money on a CAD software system when you are NEVER goingto use it to draw anything? Which CAD system do you buy? will it read ANYdrawing format? Learning to use a CAD system just so that you can measurefrom electronic drawings is very time consuming and expensive.
did NOT need to spend a fortune buying a plotter ?why buy an costly piece of hardware with expensive consumables, just so that
you can plot a paper copy? & have to keep on printing every revision? storing allthese drawings is costly.
BUT then how can I measure from electronic CAD drawings?
You CAN with…..
For that last 6 years ACE Solutions has been searching for a program that willallow the easy, accurate & fast measurement from an electronic drawing. We
have finally found one that will satisfy our WinQS®clients’ needs.
ACE Solutions cc has been appointed an OEM by Exactal, the developer’sof this exciting product which allows the fast & accurate measurement fromelectronic CAD drawings and even from ‘pdf’ drawings.
As of November 2007WinQS®has been fully integrated with
to allowWinQS®to read these measurements directly.
Currently allows electronic drawings to be loaded &measurements can be “taken off ” extremely accurately & quickly ….
7/28/2019 Dim x Features
http://slidepdf.com/reader/full/dim-x-features 2/5
..NO CAD experience needed
..NO embedded third party CAD software or licences to keep updated
..a quick & simple easy-to-learn user interface
..written by Software Boffins (rocket scientists) & designed by QS’s
..marked Up drawings can be printed showing what was measured
..measurements can be printed and referenced
..areas, lengths & counts for any items can be measured
..perimeter length is AUTOMATIC when measuring an area
..all area & length measurements include a “in No of” count
..saves all work for later reviewing/revising
..comprehensive on-screen Help system
All of these and many more reasons why you should take a serious look at this
Xciting and ‘easy to use’ software program that will change the way you
…ever measure anything !
Please contact ACE Solutions cc for more details regarding
dimensionX and to arrange for a TRAIL version of this Xciting software so thatyou can see for yourself how easy it is to use.
General Features
Provides a simple interface for the extraction of dimensions from CADfiles. Can be networked with DimensionX Server allowing live projects to be
shared and worked on concurrently. Portable licensing using small convenient USB tokens. Network licensing options available. Simple but powerful scope management capabilities for CAD drawings
and cost plans.
7/28/2019 Dim x Features
http://slidepdf.com/reader/full/dim-x-features 3/5
Dimensioning
Supports existing standard drawing formats (AutoCAD DWG, DXF andDWF).
Native PDF support for measurement from vector based PDFs. Supports electronic dimension extraction from paper drawings using
scanning technology. Ability to add views and import dimension information from an Autodesk
Revit drawing. Full measurement capability including area, length and count modes.
Dimensions can be broken down into zones (WinQS® Locations,
representing functional areas/levels/units etc. or stages of construction). Fully supports scaled drawings (including separate X and Y scales) and
allows calibration of scanned drawings. Ability to add measurements during session. Quick and easy measurements of reinforced steel using measurements
from standard reinforced steel drawings. Export of measurements to Microsoft Excel. Overlay comparisons between two drawings in a building (eg. electrical
and lighting drawings). Revisioning system for drawings. DimensionX makes it really easy to
handle new revisions of drawings, maintaining the captured dimensionswhere they still exist and providing reports on changes between drawings- what is the same, what has changed, what is no longer on the drawing.
Tied in with the revisioning capability of drawings, drawing comparisonmode graphically shows the changes between the drawing revisions.
System Requirements
dimensionX requires the following minimum system specifications:
Supported Operating Systems
Windows XP Professional (with latest service pack), or
Windows Vista Business (with latest service pack), or Windows 7 Professional 32bit (with latest service pack)
Recommended Hardware
CPU Speed
CPU speed the equivalent of Pentium IV 3.2GHz or faster (or equivalentAMD) is recommended.
CPU speed the equivalent of Pentium IV 2GHz or faster (or equivalentAMD) is required.
7/28/2019 Dim x Features
http://slidepdf.com/reader/full/dim-x-features 4/5
The following conditions increase the load on the CPU:
o Adding very large drawings to the building.o Importing dimensions and exported views from Revit.o Adding many dimensions/dimension groups to the building.o Adding many revisions to the building.
Network and Internet
Network bandwidth of 100 MB or greater is recommended (when usedwith a Server).
Network bandwidth of 10 MB or greater is required (when used with aServer).
The following conditions increase the bandwidth requirements:
o Adding very large drawings to the building which are located acrossthe network.
o Importing and exporting large amounts of data across the network.
Hard Disks
Available hard disk space of 5 GB or greater is recommended. Available hard disk space of 500 MB or greater is required.
The following conditions increase the disk space requirement:
o Adding many drawings to the building.o Adding very large drawings to the building.o Adding many dimension groups to the building.o Creating many dimensions.o Adding many workbooks to the building.o Storing many projects in the database (archiving to VXF is
recommended)
RAM Capacity
RAM capacity of 2 GB or greater is recommended. Minimum RAM capacity is 512 MB.
The following conditions increase the memory size requirement:
o Adding many drawings to the building. (An average drawing will use30-80 MB, and a large drawing will use 80-200 MB)
o Adding very large drawings to the building.o Adding many dimension groups and dimensions to the building.
7/28/2019 Dim x Features
http://slidepdf.com/reader/full/dim-x-features 5/5
o Adding exported Revit views and dimensions to the building(recommended at least 2GB).
A wheel mouse is also recommended to enable panning and zooming operations.
Graphics card, Screen Colours and Resolut ion
For best results, it is recommended that the Colour Quality/Windows Colours areset to Highest (32 bit).
Recommended screen resolution is 1280 x 1024. We recommend a 22” wideLCD screen driven by a dedicated video card with at least 512mB and using aDVI input cable.
Software Requirements
Drawing File Formats
Drawing files using the .dwg, .dxf , .dwf and .pdf file formats are supportedincluding all .dwg file format versions up to and including the AutoCAD 2010 .dwgformat.
NOTE: PDF files can contain both vector (eg. lines) and raster (eg. pictures)components. dimensionX can be set to measure from both raster and vector components of PDF files for measurement.