Digital Shot DetectionSystem (DSDS)

H4n Pro Digital Recorder

TC-410-3500-000

MAN-TC-410-000 (R06)

12001 Cr 1000Godley, Texas, 76044, USAPhone: +1 (817) 551-0540Fax: +1 (817) 551-1674www.corelab.com/owen

Warning: use of owen equipment contrary to manufacturer’s specifications or operating instructions may result in property damage, serious injury or fatality. If you are not trained in the handling and use of explosive devices, do not attempt to use or assemble any owen perforating systems or owen firing devices.This technology is regulated by and, if exported, was exported from the united states in accordance with the export administration regulations (EAR). Diversion contrary to U.S. Law is prohibited. Export and/or re-export of this technology may require issuance of a license by the bureau of industry and security (BIS), U.S. Department of Commerce. Consult the BIS, the EAR, and/or Owen Compliance Services, Inc. To determine licensing requirements for export or re-export of this technology.This document contains confidential information of Owen Oil Tools LP (Owen) and is furnished to the customer for information purposes only. This document must not be reproduced in any way whatsoever, in part or in whole, or distributed outside the customer organization, without first obtaining the express written authorization of owen. This document is the property of owen and returnable upon request of Owen.

©2011, 2018 Owen Oil Tools All rights reserved

MAN-TC-410-000.indd 1 6/11/18 3:25 PM

Digital Shot Detection System (DSDS)

2 I MAN-TC-410-000 (R06) ©2011, 2018 Owen Oil Tools All rights reserved

Description and Specifications

The Owen Digital Shot Detection System (DSDS) enables the user to monitor downhole acoustics on the tubular. The system is particularly well suited for monitoring the firing of Tubing Conveyed Perforating Guns.

Owen’s DSDS offers state of the art technology to process and record the acoustic data. The data is stored using a portable recorder. The signal can be monitored and recorded simultaneously. The recorded signal can also be digitally stored.

SPECIFICATIONS: H4N PRO DIGITAL RECORDERRecording Technology 4 Track or Stereo

Monitoring Record while monitoring or monitor on standby

Maximum Recording Length 6 Hours on Battery Power at max sampling

Sampling Frequency 44.1 KHz

Frequency Response 100-18,000 Hz

Recorder Weight 0.65 lbs (294 grams)

Recorder Dimensions 2.9 (W) X 6.2 (D) X 1.5 (H) in

Power 2 AA 1.5V Batteries or 110 Power Adapters

Editing and Copying Edit with Cubase LE4, PC Version, burn CD-R Files

Accessory Memory up to 32 GB SDHC

MINIATURE CARDIOID CONDENSER MICROPHONE (LAVALIERE TYPE)Frequency Response 40-18,000 Hz

Microphone Weight 0.1 oz (2.8 grams)

Microphone Dimensions 0.98 Long X 0.40 Diameter

Power Module Weight 4.9 oz (139 grams)

Power Module Dimensions 3.31 (H) X 2.48 (W) X 0.87 (D) in

Power or Phantom Power 1 AA 1.5V /UM3 Batter; or 11-52V DC 2mA TYP

Connection Type Integral 3-pin XLR Type

CARRYING CASESize 20 (W) x 14 (D) x 8 (H) in

MAN-TC-410-000.indd 2 6/11/18 3:25 PM

Digital Shot Detection System (DSDS)

©2011, 2018 Owen Oil Tools All rights reserved MAN-TC-410-000 (R06) I 3

BOM 4 85

2

3

6

ITEM PART NUMBER QTY. DESCRIPTION- TC-410-3500-000 - Digital Shot Detection SystemA TC-410-3500-050 1 Assembly, DSDS (Detailed BOM Below)B TC-410-3500-100 1 Microphone Assembly, DSDS

ITEM PART NUMBER QTY. DESCRIPTION- TC-410-3500-050 - Assembly, DSDS1 TCP-DSDS-005 1 Carrying Case, DSDS System (not shown)2 TCP-DSDS-021 1 Headphones, AKG K723 TC-410-0002-055 1 H4n Pro Digital Recorder- Included W / H4n Pro 1 Download License for Cubase LE and WaveLab LE Software- Included W / H4n Pro 2 AA Battery- Included W / H4n Pro 1 H4n Pro Operation Manual4 TC-410-0001-050 1 Microphone Cable, Horizon CK25, 25 feet long5 TC-410-0002-056 1 AD-14 AC Adapter6 TC-410-0002-057 1 USB Cable, Type A Male x Type B Mini Male7 MAN-TC-410-000 1 Operating Instructions, DSDS

MAN-TC-410-000.indd 3 6/11/18 3:25 PM

Digital Shot Detection System (DSDS)

4 I MAN-TC-410-000 (R06) ©2011, 2018 Owen Oil Tools All rights reserved

MAN-TC-410-000.indd 4 6/11/18 3:25 PM

Digital Shot Detection System (DSDS)

©2011, 2018 Owen Oil Tools All rights reserved MAN-TC-410-000 (R06) I 5

Digital Shot Detection System (DSDS)

Warning: Be sure to follow safe operating practices as found in API RP-67 and in accordance with government regulations. company policies and manufacturers recommendations!

1.0 DSDS Setup and Operation

The Owen DSDS unit is simple to operate and easy to use. The recorder has been preset to operate at the well site “out of the box” with a few preliminary actions. Familiarize yourself with the H4n Pro Recorder Operating Manual and the pre-operation checks provided in this Manual.

1.1 Set-up, Install the Batteries

• Recommendation: Always replace the Batteries before every job! Remove 2 AA Size Batteries from the package and install in the H4n Recorder:

1.1.1 Slide the cover outward away from the Recorder and lift the lid upward to remove it.

1.1.2 Install the 2 batteries with the polarity shown above.

1.1.3 Install the cover by reversing the steps in ‘A’.

MAN-TC-410-000.indd 5 6/11/18 3:25 PM

6 I MAN-TC-410-000 (R06) ©2011, 2018 Owen Oil Tools All rights reserved

Digital Shot Detection System (DSDS)

1.2 Connect the SD Card

1.2.1 Ensure power is off

1.2.2 Rotate the lid away from the Recorder to open

1.2.3 Insert the SD card into the slot

1.2.4 Rotate the lid closed

1.3 Function Check

1.3.1 Turn on the Recorder to check that it is operating properly. Move the On/Off switch DOWNWARD to turn on the Recorder.

1.3.2 Check that the red ‘Track’ light ‘1’ and ‘2’ are on.

1.3.3 Check that the red ‘Stereo’ light is on and the Display is operating.

1.3.4 Turn off the Recorder by moving the On/Off switch UPWARD and holding until the Recorder is off.

MAN-TC-410-000.indd 6 6/11/18 3:25 PM

©2011, 2018 Owen Oil Tools All rights reserved MAN-TC-410-000 (R06) I 7

Digital Shot Detection System (DSDS)

1.4 Connect ther Recorder to the MIC:

Note: For the DSDS System operation it is not necessary for the MIC Power Unit to have a Battery installed.

1.4.1 Insert the female end of the 25’ MIC Cable (lettering facing up) into the MIC Power Unit.

1.4.2 Check that the switch on the MIC Power Unit is in the “ON” position and all the way up as far as possible.

1.4.3 Attach the microphone assembly to the pipe or well head securely using the Velcro Strap.

MAN-TC-410-000.indd 7 6/11/18 3:25 PM

8 I MAN-TC-410-000 (R06) ©2011, 2018 Owen Oil Tools All rights reserved

Digital Shot Detection System (DSDS)

1.5 Connect Headphones and Microphone to Recorder

1.5.1 Insert the male connector of the Headphones into the ‘Phones’ jack on the Recorder.

1.5.2 Insert the other end of the 25’ MIC cable into the right hand jack (Input 2) on the botton of the Recorder.

1.6 Recording

1.6.1 Turning the Recorder on by moving the On/Off switch DOWNWARD to turn on the Recorded (as done in Step 1.3.1).

1.6.2 Press the REC button once into enter recording standby. The REC button will start blinking.

MAN-TC-410-000.indd 8 6/11/18 3:25 PM

©2011, 2018 Owen Oil Tools All rights reserved MAN-TC-410-000 (R06) I 9

Digital Shot Detection System (DSDS)

1.6.3 Adjust the recording level of the microphone using the toggle found on the right side of the Recorder.

1.6.4 Press the REC button a socond time to start recording. The REC button will stop blinking and be solidly lit.

1.6.5 When recording is complete, press the STOP button to end recording. The REC button light will now be off.

1.6.6 Immediately after recording, the file can be played back by pressing the PLAY/PAUSE button.

1.7 Create a CD Job Record

1.7.1 Refer to the H4n Pro Recorder Owner’s Manual to create a Job Record by transferring data onto a CD.

MAN-TC-410-000.indd 9 6/11/18 3:25 PM