22
DIGITAL PHOTOGRAPHY: BACK TO BASICS Source: www.exposureguide. com

DIGITAL PHOTOGRAPHY: BACK TO BASICS Source:

Embed Size (px)

Citation preview

DIGITAL PHOTOGRAPHY: BACK TO BASICS

Source: www.exposureguide.com

PARTS OF THE CAMERA (FRONT)

PARTS OF THE CAMERA (BACK)

VIEWING SYSTEMOptical viewing can help you see what is being photographed. The Electronic viewing can allow you to compensate for colour balance, etc. by providing more information about the photo.

IMAGE SENSOR

Since the dawn of photography, cameras have captured and stored images on glass plates or on film. Today, digital cameras capture the images on a nifty piece of technology – the image sensor. The image sensor is made up of millions of light sensitive photodiodes set on a grid, where each photodiode records a tiny portion of the image as a numeric value that corresponds to a specific brightness level, which is then used to create your image.

LENS OPTIONSTelephoto – used for taking subjects from a distance (e.g. wildlife), but narrower field of view & shallow depth of field.

Standard – fixed focal length (similar to the human eye), usually 50 mm.

Wide-angle – shorter focal length for for a wider angle of view & greater depth of field. Good for landscapes and group shots.

Close-up – a.k.a macro lens, allows detailed images of small / near subjects (e.g. insects, plants).

FLASHThe flash is only good for up to 1 meter from your subject, objects further away will not be illuminated.DSLR cameras allow for more control over the use of the flash.

CAMERA MODES

1. AUTOMATIC MODE

Most of the time, auto will pick the ideal settings for your shot. Uneven lighting is more difficult & flash may be triggered when not needed.

2. PORTRAIT MODE

This mode “thinks” there is a subject in the foreground and creates a shallow depth of field. Flash will often be used to light your subject.

3. MACRO MODE

Best for subjects smaller than your hand. Takes a shallow depth of field to focus on the subject. Works best in good lighting & with a tripod.

4. LANDSCAPE MODE

Usually this mode uses a small aperture to create focus from front to back of the landscape photo. Works best in good lighting conditions – no flash needed.

5. SPORTS MODE

Uses faster shutter speeds in order to capture fast-paced movement associated with sports. Works well in good lighting and continuous shooting mode.

6. NIGHT PORTRAIT MODE

Balances dark background with lighting your foreground subject. Sometimes the flash will double-fire to compensate.

7. ADVANCED CAMERA MODES

M (Manual) – allows the photographer to change every single setting;

AV (Aperture-Priority) – allows the photographer to set the aperture value and the camera automatically sets the correct shutter speed;

TV or S (Shutter Priority) – lets the photographer choose the shutter speed first (for example when shooting sports) and the camera automatically sets the correct aperture.

P (Program mode) – similar to Auto mode - the shutter and aperture settings are determined by the camera, but the photographer can adjust the shooting and image-recording functions.

ISOISO ratings determine the image sensor’s sensitivity to

light. Lower ISO numbers produce crisper, more defined high resolution images.

Higher ISO numbers work in lower light situations but appear more grainy.

SHUTTER SPEEDThe Shutter Speed indicates the speed in which the curtain opens then closes, and each shutter speed value also represents a “stop” of light. The shutter speed is measured in fractions of a second.

APERTUREThe Aperture controls the lens’ diaphragm, which controls the amount of light traveling through the lens to the film plane. The aperture setting is indicated by the f-number, whereas each f-number represents a “stop” of light.

DEPTH OF FIELDlarger aperture setting = shallower depth of field

smaller aperture setting = deeper depth of field

DEPTH OF FIELD (EXAMPLE…)

DEPTH OF FIELD (EXAMPLE…)

EXPOSURE

The exposure of a photo is determined by the ISO, Shutter Speed, and Aperture combined. Any change in any one of the three elements will have a measurable and specific impact on how the remaining two elements react to expose the film frame or image sensor and how the image ultimately looks.