Upload
tarax-technology-limited
View
774
Download
1
Tags:
Embed Size (px)
Citation preview
Digi-PasTM
Innovation & Technology Driven
www.digipas.comREVISION 4.01
DUAL AXIS
Note: Contents in this manual is constantly updating, please check the website for the latest version of the instruction manual.
! Please observe the Safety Instruction beforeoperating the device. Device containsSTRONG MAGNET !
Model:DWL3000 XYHigh Precision Digital Level & Vibrometer
® Registered Design
SPECIFICATION
OVERALL VIEW
CHAPTER 1: TECHNICAL SPECIFICATION
1
Measurement Range(Single Axis)
Measurement Range(Dual Axis)
Resolution
Accuracy
Repeatability
Sensitivity
Measurement Unit
Vibrometer
Display
Power Supply**
Material
PC Software
USB Connectivity
Operating TemperatureStorage Temperature
Dimension (mm)
Netts Weight (kg)
User Self Calibration
DWL3000XY
0.00° to ± 90.00°
0.00° to ± 45.00°
0.01°(175µm/M) (0.0069 in./ft)
± 0.01° at 0° ~ ± 10.00° ± 0.03° at other angle*
0.01° Full Range*
0.003° at 0° ~ ± 5.00° 0.01° at other angle*
Degree, mm/M, inch/feet
1.0g
Colour TFT LCD
4x “AAA’”1.5V / USB
PC ABS / Aluminium
PC Sync (Optional)
USB 2.0 (< 5 metre)
-10°C to +50°C (Calibrated)-20°C to +70°C
188 x 62 x 37
580 gram
Yes
Specifications are subject to change without notice.
Note:
* Use in conjunction with Digi-Pas™ Angle Adaptor® to avoid Cross Axis region ** Alterative Device power can be obtained from External USB Power Source .
OVERALL VIEW1
CHAPTER 1: OVERVIEW
Battery Compartment of 4 x “AAA” size 1.5V batteriesObserve the Polarity of the Batteries indicated on the top of the battery cover ON/OFF: Turn on/off
- Escape from Mode function
LCD Colour graphic digital display
Buzzer sound alert
USB Port: - Alternative power supply - Data transfer from device to computer - Firmware update
CAL: Change calibration value - (Refer calibration instruction)
HOLD: Freeze display value - Change the selection cursor in - clockwise or RIGHT direction
MODE: Change the function and display mode- Selection the function
UNIT: Change the unit of the measurement
Ball Screw:Using of Three - points screw onmeasuring plane surface
FRONT VIEW
BACK VIEW
Side Screw holes: For mounting purpose.
Aluminium Base
Product surfaces and Aluminium base contain STRONG MAGNETto securely hold on to metal work piece.!
OVERALL VIEW
CHAPTER 1: DISPLAY SCREEN
1
0˚45˚
Digi-Pas™
90˚-90˚
-45˚
DEGREE00.01°SINGLE AXIS ANGLE DUAL AXIS ANGLE
Angle Meter
Ang
le (D
egre
e)
HOZ. 0.01°
Time(s)
+90
+45
0
-45
-90
Vibro Meter
Mag
nitu
de -
mg
High Speed Acquisition
Time(s)
+1
0
+2
+3
-1
-2
-3
ANGLE METER
POWER ON SCREEN
DEGREE00.01
Digi-Pas™ 00.01
MAIN MENU
MENU
VIBRO METER
Setting
AutoOff
Auto Dim
Units
Buzzers
Display Brightness
10 Min.
3 Min.
DEGREE
ON
90%
SETTING MENU
HELPEXIT
UNIT HOLD
MODE
HELP MENU
(For Default Screen)
1/7
ALTERNATE ZERO MENU
Alternate Zero Setting
Press ‘MODE’ to start
Dual Axis Position
ABSOLUTE LEVEL MENU
Absolute Level Setting
Press ‘MODE’ to start
Dual Axis Position
Position 1 : Front
OVERALL VIEW
CHAPTER 1: SOFTWARE
1
PC Sync SoftwareDUAL AXIS ANGLE GRAPH VIBRO GRAPH
DUAL AXIS ANGLE METER
USB Connection for angle & vibration remote monitoring, data logging & analysis in computer.
Software Features
PC
Device