Diamond Edge

All Tuff-Lift Slings meet or exceed ASME B30.9 and WSTDA standards and regulations. Every sling is shipped with a Sling Safety Bulletin containing important information about the use of synthetic web slings.

5:1 Design Factor Working Load Limit in Pounds

Type 3 & 4 (Eye & Eye) WIDTH

(in.) VERTICAL CHOKER BASKETVERTICAL CHOKER BASKETVERTICAL CHOKER BASKET APPROX. WT. (lbs./ft.)

Sin

gle

Ply

1 1600 1280 3200 0.061 1600 1280 3200 0.061 1600 1280 3200 0.061 1600 1280 3200 0.061 1600 1280 3200 0.062 3100 2480 6200 0.112 3100 2480 6200 0.112 3100 2480 6200 0.112 3100 2480 6200 0.112 3100 2480 6200 0.113 4700 3760 9400 0.173 4700 3760 9400 0.173 4700 3760 9400 0.173 4700 3760 9400 0.173 4700 3760 9400 0.174 6200 4960 12400 0.234 6200 4960 12400 0.234 6200 4960 12400 0.234 6200 4960 12400 0.234 6200 4960 12400 0.235 7800 6240 15600 0.275 7800 6240 15600 0.275 7800 6240 15600 0.275 7800 6240 15600 0.275 7800 6240 15600 0.276 9300 7440 18600 0.356 9300 7440 18600 0.356 9300 7440 18600 0.356 9300 7440 18600 0.356 9300 7440 18600 0.358 11750 9400 23500 0.468 11750 9400 23500 0.468 11750 9400 23500 0.468 11750 9400 23500 0.468 11750 9400 23500 0.46

10 14700 11760 29400 0.5710 14700 11760 29400 0.5710 14700 11760 29400 0.5710 14700 11760 29400 0.5710 14700 11760 29400 0.5712 17600 14080 35200 0.7112 17600 14080 35200 0.7112 17600 14080 35200 0.7112 17600 14080 35200 0.7112 17600 14080 35200 0.71

Dou

ble

Ply

1 3100 2480 6200 0.111 3100 2480 6200 0.111 3100 2480 6200 0.111 3100 2480 6200 0.111 3100 2480 6200 0.112 6200 4960 12400 0.212 6200 4960 12400 0.212 6200 4960 12400 0.212 6200 4960 12400 0.212 6200 4960 12400 0.213 8800 7040 17600 0.333 8800 7040 17600 0.333 8800 7040 17600 0.333 8800 7040 17600 0.333 8800 7040 17600 0.334 11000 8800 22000 0.464 11000 8800 22000 0.464 11000 8800 22000 0.464 11000 8800 22000 0.464 11000 8800 22000 0.465 13700 10960 27400 0.535 13700 10960 27400 0.535 13700 10960 27400 0.535 13700 10960 27400 0.535 13700 10960 27400 0.536 16500 13200 33000 0.696 16500 13200 33000 0.696 16500 13200 33000 0.696 16500 13200 33000 0.696 16500 13200 33000 0.698 22750 18200 45500 0.928 22750 18200 45500 0.928 22750 18200 45500 0.928 22750 18200 45500 0.928 22750 18200 45500 0.92

10 28400 22720 56800 1.1310 28400 22720 56800 1.1310 28400 22720 56800 1.1310 28400 22720 56800 1.1310 28400 22720 56800 1.1312 34100 27280 68200 1.4212 34100 27280 68200 1.4212 34100 27280 68200 1.4212 34100 27280 68200 1.4212 34100 27280 68200 1.42

Type 5 (Endless) WIDTH

(in.) VERTICAL CHOKER BASKETVERTICAL CHOKER BASKETVERTICAL CHOKER BASKET APPROX. WT. (lbs./ft.)

Sin

gle

Ply

1 3200 2560 6400 0.113200 2560 6400 0.113200 2560 6400 0.113200 2560 6400 0.112 6200 4960 12400 0.216200 4960 12400 0.216200 4960 12400 0.216200 4960 12400 0.213 9400 7520 18800 0.339400 7520 18800 0.339400 7520 18800 0.339400 7520 18800 0.334 12400 9920 24800 0.4612400 9920 24800 0.4612400 9920 24800 0.4612400 9920 24800 0.465 15600 12480 31200 0.5315600 12480 31200 0.5315600 12480 31200 0.5315600 12480 31200 0.536 18600 14880 37200 0.6918600 14880 37200 0.6918600 14880 37200 0.6918600 14880 37200 0.698 21150 16920 42300 0.9221150 16920 42300 0.9221150 16920 42300 0.9221150 16920 42300 0.92

10 26450 21160 52900 1.1326450 21160 52900 1.1326450 21160 52900 1.1326450 21160 52900 1.1312 31750 25400 63500 1.4231750 25400 63500 1.4231750 25400 63500 1.4231750 25400 63500 1.42

Dou

ble

Ply

1 6200 4960 12400 0.226200 4960 12400 0.226200 4960 12400 0.226200 4960 12400 0.222 12400 9920 24800 0.4212400 9920 24800 0.4212400 9920 24800 0.4212400 9920 24800 0.423 17600 14080 35200 0.6617600 14080 35200 0.6617600 14080 35200 0.6617600 14080 35200 0.664 22000 17600 44000 0.9222000 17600 44000 0.9222000 17600 44000 0.9222000 17600 44000 0.925 27400 21920 54800 1.0627400 21920 54800 1.0627400 21920 54800 1.0627400 21920 54800 1.066 33000 26400 66000 1.3833000 26400 66000 1.3833000 26400 66000 1.3833000 26400 66000 1.388 42350 33880 84700 1.8442350 33880 84700 1.8442350 33880 84700 1.8442350 33880 84700 1.84

10 52900 42320 105800 2.2652900 42320 105800 2.2652900 42320 105800 2.2652900 42320 105800 2.2612 63500 50800 127000 2.8463500 50800 127000 2.8463500 50800 127000 2.8463500 50800 127000 2.84

5:1 Design Factor Working Load Limit in Pounds

! Tuff-Lift®Original Product

Edmonton 780.481.1122 Grande Prairie 780.539.7316Red Deer 403.340.3620 Calgary 403.236.1262

TITAN RIGGING PRODUCTS

For more information, please visit us onlinewww.titansupply.ca

DiamondEdge

Specially coated threads used on edges which provide superior edge cut resistance, increasing sling life

Available in 1,2,3,4 and 6 inch widths

Lightweight, pliable, and easy to handle

Non-sparking feature allows for use in explosive atmospheres

Highly visible poly tag stands up to all working conditions

Reinforced eyes for added durability

Proudly made in Canada

DiamondDiamondDiamondDiamondDiamondDiamondDiamondDiamondDiamondDiamondDiamondDiamondDiamondDiamondDiamondDiamondEdgeEdgeEdgeEdgeEdgeEdgeEdgeEdgeEdgeEdgeEdgeEdgeEdgeEdgeEdgeEdgeEdgeEdgeEdgeEdgeEdge

ITANIGGING

RODUCTST

PR