DEUTZ-FAHR COMBINE HARVESTERSMaximum performance, minimum consumption.

The DEUTZ-FAHR tradition of power matched with reliability continues with the introduction of a comfortable new cab and elegant Giugiaro styling which reinterpretes the familiar family look of the brand. Four new 5- and 6-straw walker models are introduced - the C9205 TS, C9205 TSB, C9206 TS and C9206 TSB - with specific features tailored for maximised productivity in all crop applications with the added capability of working large areas. The new design is not just elegant but offers easier access too, with large gull-wing lateral doors and a rear sliding door making the task of refuelling the main and AdBlue tanks much simpler. The superbly performing and efficient 7.8 litre, 246 kW (334 hp) Deutz TCD L6 T4i engine is used

DEUTZ-FAHR CombinE HARVESTER: THE NEW C9000 SEriES.

C9205 C9206

Engine DEUTZ TCD L6 T4i 7.8 lt.Max. power (ECE R120) kW/HP 246 / 334 290 / 395

Power at rated speed (97/68/EC) kW/HP 226 / 307 267 / 363

Cutting width mm 4,80 - 7,20 5,40 - 9,00

Diameter Width / Threshing drum mm 600 / 1270 600 / 1521

Turbo-separator (TS) standard

Straw Walker shaking area m2 5,60 6,70

Sieving surface area m2 5,28 6,32

Fuel Tank 750

AdBlue® Tank 85

Grain tank capacity l 9500

2

in both the C9205 and the 290 kW (395 hp) Deutz TCD L6 T4i engine for the C9206. After being taken aback by the emotive design of this new combine harvester, you’ll be simply astonished by the efficient solutions adopted to make periodical maintenance easier. Every aspect is optimised so it only takes a few moments to check under the cowls before you can set off again on a safe and long day of harvesting.

New CAB COMMANDeR CAB V.Generously equipped with numerous lights and features such as electrically powered double curvature convex rear view mirrors, the cab fits in perfectly with the new style, while its superb visibility is an invitation to take control of the new DEUTZ-FAHR Series C9000. The comfortable drivers seat, upholstered in new dust-proof soft-touch materials and offered in a new colour scheme, caters for the needs of even the most exacting driver. The capacious 21 litre portable refrigerator incorporated in the passenger seat is highly versatile and performs brilliantly at any ambient temperature. The completely new steering wheel and steering column have been specifically designed for maximum ergonomic benefit and superb levels of comfort, whether driving in the field or on the road.

MAXI CROp.The outstanding performance and fuel efficiency of the new harvesters has also been made possible by the revised “Maxi-Crop” threshing system, which combines an extraordinary range of capability - with its exclusive variable section concave - with the robustness and the adaptability required to work with all possible crop types and in all conditions. With this centrifugal drum, the hourly output capacity of the combine harvester . The turbo separator can generate increas-es up to 20 % in productivity, whatever harvesting conditions are encountered. The benefit of the exclusive 5-position electric adjustment feature is that the separating action can be varied to suit the characteristics of the threshed crop, and in the case of cereal crops, the quality of the straw is preserved for sub-sequent baling operations. The Turbo Separator is fitted with special wear-resistant plates to potect the pressing teeth.

3

CutteR BARS .Nothing has been left to chance in the new range of DEUTZ-FAHR C9000 Series combine harvesters.The one-piece construction, of the cutter bars, together with the Autocontrol and Schumacher Easy Cut II systems, ensure uniform and safe cutting in all conditions, while reducing wear and saving fuel.

eXtRA FeeDINg.Nothing has been left to chance in the new range of DEUTZ-FAHR C9000 Series combine harvesters. The feeder channel, with the “Extra Feeding” system and hydraulic reverse shuttle is no exception. Comprising a roller with retractable fingers which increases and provides a constant feeding to the threshing components, reducing stress to the transmission, resulting in a lower power requirement. Adding to this is an exclusive electrohydraulic cutting table incidence angle regulator system. Together, these solutions ensure that the threshing components are fed continuously and uniformly.

4

5

bALAnCE: inCLinATion iS NOT A PrOBLEM ANYMOrE.

6

When working on gradients, the Balance system ensures the same threshing performance as on level terrain. The inclination of the combine harvester is monitored by potentiometers, with the signals being processed by an electronic control unit, which then sends the necessary control signals to adjust the hydraulic system in real time. As a result, DEUTZ-FAHR combine harvesters equipped with the Balance system can remain perfectly level when working on lateral gradients up to 20% and longitudinal gradients up to 6%. This maintains the optimum operating conditions for the threshing, straw walker and cleaning systems, so that the product is processed efficiently and uniformly, for maximum productivity.On BALANCE versions, the generous grain tank can be filled to its full 9,500 litre (standard for C9000 series) capacity even in the most challenging working conditions. And as the system maintains an even weight distribution over the driving wheels, all the power of the engine can be put to use effectively in any situation. The BALANCE function is activated by simply

pressing a button in the cab, while the level of the machine can also be corrected manually if necessary. With automatic cutting angle control - a feature offered exclusively by DEUTZ-FAHR - the threshing drum is fed uniformly.

BALANCe

SpeCIFICAtIONS Efficient harvesting even in the most difficult conditions

Innovative gradient compensation system

Compensates for lateral gradients up to 20% and longitudinal gradients of up to 6%

Active cutting control with “AutoControl” function

Automatic cutting angle adjustment system

Cutting optimised ideally to the contours of the terrain

Constant threshing and separation performance

7

nEXT GEnERATion oF COMBiNE HArVESTEr.

60 SERiES: THE ART oF THrESHiNG.

The key strengths of DEUTZ-FAHR 5 and 6 straw walker combine harvesters are power, comfort and productivity, which are complemented by state of the art technology developed on the basis of extensive experience in harvesting applications. Together, these attributes mean that 60 Series combine harvesters offer unparalleled quality.The DEUTZ TCD L6 T4i engines deliver superb performance together with low maintenance costs, and a maximum power range from 184 kW (250 hp) to 290 kW (395 hp)

TIER 3B ENGINES 6060 6060 HTS 6065 HTS 6090/6090 HTS 6095 HTS

Engine DEUTZ TDC L6 6.1 lt DEUTZ TDC L6 7.8 lt

Maximum Power (ECE R120) Kw/HP 184/250 211/287 (**) 246/334 (**) 290/395 (**)

Power at Rated Speed (97/68/EC) Kw/HP 169/230 183/250 226/307 267/363

Cutting Width m 4,20-6,30 4,20-6,30 4,80-7,20 5,40-7,20

Threshing drum diameter/width mm 600/1270 600/1270 600/1521

Turbo-Separator (Ts) -/std on HTS versions

Straw Walker shaking area m2 6,35 5,60 7,60 (6,70 HTS) 6,70

Sieving Surface Area m2 5,28 6,32

Fuel Tank l 750

AdBlue® Tank l 85

Grain Tank Capacity l 7.500 8.500 9.500

10

(**) The overboost function is available when harvesting and emptying simultaneously

t4i eNgINeS LOweR FueL CONSuMptION AND CLASS-BeAtINg peRFORMANCe.The DEUTZ Common Rail (DCR) engines match impressive power with outstanding reliability, saving considerable amounts of fuel and making each tonne of produce harvested significantly more profitable. Offered with displacements from 6.1 to 7.8 litres, DEUTZ TDC L6 T4i engines deliver great performance in the field, with power outputs from 169 kW (230 hp) to 290 kW (395 hp) matched with among the lowest fuel consumption figures in their class. With Common Rail injection, 24 valves and an electronic governor system, these engines deliver exactly the right amount of power for the occasion and can respond to load peaks without losing performance. Power is taken from both sides of the engine, for improved power distribution and a more compact machine. The hydrostatic pump is mated directly to the engine. With the new SCR (Selective Catalytic Reduction) system, DEUTZ TDC T4i engines produce substantially lower nitrogen oxide emissions (NOx), which are among the most harmful of all emissions produced by the combustion process.

COMMANDeR CAB IVDeSIgNeD tO Let YOu DOMINAte tHe FIeLD IN tOtAL COMFORt.The interior of the Commander Cab IV offers the ideal environment to keep the driver working at peak performance even throughout the longest working day. With superior soundproofing, controls organised rationally by function and excellent visibility, the driver can stay focused on the job of harvesting and maximise the productivity of the combine harvester. With the Instrumentation and controls of the 60 Series, the driver is in complete control of the combine harvester and can continuously monitor the quality of the work completed using the CCM (Combine Control Management) system, adjustments to the ventilation speed, the threshing drum speed and opening and closing of the sieves can be simply carried out, intuitively via the Commander Control. For even better visibility and more precise harvesting at night, an even larger choice of work lights is now available, with 5 different packs on offer (VISIBILITY PACKS), while the combine harvester may be equipped with up to 3 cameras to oversee the surrounding area.

11

6040-6040 HTS:iNTELLiGENT EVOLUTiON.

TIER 3B ENGINES 6040-6040 HTS

Engine DEUTZ TDC L6 6.1 lt

Maximum Power (ECE R120) kW/HP 184/250

Power At Rated Speed (97/68/Ec) kW/HP 169/230

Cutting Width m 4,20-6,30

Threshing Drum Diameter/Width mm 600/1270

Turbo-Separator (Ts) -/std

Straw Walker shaking area m2 5,28/4,60

Sieving Surface Area m2 4,22

Fuel Tank l 450

AdBlue® Tank l 53

Grain Tank Capacity l 6.500

6040 Series – a range of DEUTZ-FAHR 5 straw walker combine harvesters.Cost-effective and comfortable, this model offers unbeatable value for money and has all the right attributes to maximise your productivity. With a cutting width of up to 6.30 metres and the new 184 kW (250 hp) DEUTZ 6.1 T4i engines, the 6040 Series is the perfect solution for farms of all sizes and for farmers demanding both reliability and an immediate return on their investment.

12

COMMANDeR CAB eVO tHe eVOLutION OF tHe SpeCIeS: COMFORt AND FuNCtIONALItY.The new COMMANDER CAB EVO is the perfect place to spend a long day of harvesting. The new console puts all the controls you need at your fingertips without obstructing visibility on the right hand side of the machine, while the selector levers on the left hand side are designed not to impede access to the drivers seat.The manual air conditioning system maintains the ideal climate inside the cab for maximum driver comfort. Numerous storage areas are available for stowing documents and everything else a combine harvester driver needs during the working day. The CCM system represents the state of the art in control systems today and lets the driver monitor the quality of the work completed in real time. A set of warning lights and alarms immediately notify the driver of any malfunctions of the combine harvester.8 powerful lamps mounted on the cab illuminates the work area clearly in all conditions. With a powerful air conditioning system and numerous adjustable vents, the perfect climate can be maintained inside the cab even during long, hot summer days.

t4i 6040-6040 HtS engines.DEUTZ engines combine power and flexibility with low fuel consumption and impressive durability. You can be confident these engines can work for hours on end in the toughest conditions, in dusty environments and in the most extreme temperatures. With 230 hp (169 kW) on tap, the 6040 always has plenty of power in reserve to tackle any crop and any terrain, while the 250 hp (184 kW) engine of the 6040 HTS maximises the already impressive productivity of the combine harvester. The 6.1 litre DEUTZ TCD L6 T4i engine combines outstanding power with continuous productivity. The 24 valve Tier 4i DEUTZ Common Rail engine delivers extraordinary performance together with impressive fuel economy.With the new SCR (Selective Catalytic Reduction) system, DEUTZ TDC T4i engines produce substantially lower nitrogen oxide emissions (NOx). Power is taken from both sides of the engine, for improved power distirbution and a more compact machine. The hydrostatic pump is mated directly to the engine.An ample platform offers easy, trouble-free access for all engine maintenance.

13

Control levers positioned on the left hand side do not restrict easy access to the driver seat.

14

CombinE DEUTZ-FAHR: VErSATiLiTY ANd MAxiMUM PErfOrMANCE.

CutteR BARS.High performance cutter bars with cutting widths of 4.2 and 9.0 metres. Folding crop dividers and multiple hydraulic connections make the cutter bar unit quick and simple to install or remove.With planetary gear transmission and a cutting rate of 1,220 cuts/min, the bar always cuts quickly and precisely in all harvesting conditions. The offset configuration of the blades reduces wear and ensures excellent cutting results in all conditions. The large diameter feeder auger, with tall flights and auger fingers in a spiral configuration ensure continuous feed and product transfer.AUTOCONTROL system is available (optional), for automatic control of cutting height and lateral inclination. The AUTOCONTROL system regulates the lateral and vertical movement of the cutter bar precisely, to maintain a constant cutting height and ensure effective harvesting and superior cleanliness.The feeler skids allow the cutter bar to follow the contours of the ground precisely and make instantaneous corrections to maintain the correct working height.

geNtLe CeReAL HANDLINg.

The legendary efficiency of DEUTZ-FAHR threshing systems has been taken to new unparalleled heights. The threshing system used in DEUTZ-FAHR combine harvesters is robust, reliable and extremely productive. The threshing geometry of DEUTZ-FAHR combine harvesters offers the benefits of very high productivity while handling the grain and straw gently to ensure the quality is intact.The distances between the concave and the threshing drum at the front and rear are independently adjustable. This means that the combine harvester can adapt ideally to different harvesting conditions. With a large aperture, blockages can quickly be cleared from the concave.

MuLtI-SegMeNt CONCAVe.With the exclusive DEUTZ-FAHR transverse segment system (optional), the combine harvester can be reconfigured quickly to work with different crops and in different conditions throughout the harvest season.

15

HtS.A Turbo Separator (optional) that can be set to 5 different

positions ensures maximum productivity and total grain

protection with a variety of different crops.

tuRBO FAN.The high performance 44 vane turbo fan (440 mm in

diameter), aspirates air along the entire width of the

combine harvester. Transverse air flows are distributed

and controlled by deflectors, which can either accelerate

or decelerator the flow of air over the sieves as necessary.

The air flow is spread uniformly over the entire length of

the sieve box. For very fine grain crops, the air volume may

be reduced by deflectors, while the fan speed is adjusted

electronically between 480 and 980 rpm.

DeutZ-FAHR RetuRN SYSteM (DgR).With the DEUTZ-FAHR return system (DGR), any ears left

unthreshed are processed by blades with friction inserts

on both sides, meaning that the grain is sent completely

separated to the grain pan. Special friction inserts

further maximise the efficiency of the threshing system

by separating the grain from any husks remaining in the

sieves.

These inserts further maximise the efficiency of the

threshing system by separating the grain from any husks

remaining in the sieves. They can be changed to adapt to

suit different crops and ensure that the product is handled

correctly to prevent any crop damage. This solution

prevents the threshing system from overloading and the

consequent risk of grain breakage or increased grain loss.

StRAw CHOppeR & CHAFF SpReADeR.The DEUTZ-FAHR high cutting density straw chopper

ensures that harvested land is left ready for the next

farming activity. The wide working area of this accessory

spreads the chopped material over the entire area, even

when working with very wide cutter bars. The straw

chopper is controlled directly from the cab, and is activated

before the threshing drum to prevent transmission

overload. Easy access to the blades for adjustment,

minimises maintenance and set up times. For even more

effective material distribution, the straw chopper may

also be equipped with electrically adjustable deflectors,

to adapt spreading to environmental conditions. With

a new conveyor and two 4-blade rotors, the chaff spreader

distributes the material leaving the sieves across the same

working area as the straw chopper to obtain an ideal mix of

straw/chaff mixture and facilitate the breakdown of organic

material into the soil.

New chaff conveyor with metal chutes directing the chaff towards the 4-blade rotors.

deutz-fahr.comDEUTZ-FAHR is a brand of

DEUTZ-FAHRLUBRICANTS

The use of original lubricants and coolants is recommended.