Upload
nguyentram
View
216
Download
0
Embed Size (px)
Citation preview
DETZO is a machine manufacturer in Taiwan.
We was established in 1990
Taiwan
We are in northern Taiwan
DETZO Service in Taiwan & China
2nd factory in Shenzhen
Office in Qingdao
★
★
★
★ ★ Head office in Taiwan
Office in Shanghai
Office in Ningbo
Equipment strength:
To integrate with devices and
mechanisms enabling machine
flexible and adaptable.
Fully Automatic Machine Line
★ Vibrating parts feeder loading ★ Tray collecting loading
★ Winder + Twister ★ Winder + Taping ★ Winder + Enamel removing
★ 4 / 6 / 8 /10 Stations Solder + Tester
★ Servo conveyor ★ Flexlink conveyor ★ Bosch pallet conveyor ★ Belt conveyor
Standard Fully Automatic Machine Line
★ Solder + Tester (DCR/Hi-Po/Surge)
★ Winding ★ Vibrating parts feeder
★Pin Inserting
Optional PLC System: Omron, Panasonic, Keyence Schneider, Siemens
For transformer Vibrating parts feeder + Primary winding + taping + Secondly winding + taping + unloading
For Electromagnetic switch Winding + soldering + Pin Bending, Clamping + Surge / Resistance testing + Gluing + Laser marking + Screwing machine Cycle time: 10sec/2pcs
For Solenoid: Coil winding / Soldering / Resistance & Pressure Testing / Cover Assemble / Plastic injection Machine……. C/T: 4.5 Sec/pc
For Water Value Fully Automatic Machine Line: Coil winding / High frequency soldering / CCD testing / Resistance testing
Multiple Spindles Coil Winding Machine
8 Spindles 1 Spindle 6 Spindles 4 Spindles
10 Spindles 12 Spindles 16 Spindles 24 Spindles
Taping Twister Heater (self-bonding wire)
Wire strip
8 spindles coil winding / taping machine
Copper Wire winding 1 wire winding 2 wire bi-filar winding
1st taping TIW winding
2nd taping
Tin wire ferrite winding
6 / 8 or more Stations:
1: Loading 2: Pin Flux 3: Pin Soldering 4: DCR Testing 5: OK Unloading 6: NG Unloading 7:
1 or 2 Stations Flux / Soldering
Line type Solder Round-table Solder
Extra station for ☆ Performance ☆ Hi-Po Testing ☆ Surge Testing ☆ CCD testing ☆ Cooling system ☆………………
★ Dip type ★ Wave type ★ Spot welding
★ Iron Soldering ★ High Frequency ★ Arc welding ★ Angle rotating
1: Loading
2: Pin Flux
3: Pin Soldering
4: DCR Testing
5: OK Unloading
6: NG Unloading
6 / 8 or more Stations Soldering machine:
To build-in an Ohm tester
1: Loading 2: Pin forming 3: Hi-Po testing 4: Performance Testing 5: NG Unloading 1: Pin 2:Hi-PO 3:Turn 4:Direction 5: Lx 6:DCR 6: Ok unload to tube
To intergrade Hi-Po tester & performance tester
Roundtable type tester
1: Loading 2: Pin forming 3: Hi-Po testing 4: Performance Testing 5: NG Unloading 6: Ok unload to tray
To intergrade Hi-Po tester & performance tester