Desoldering Tips – Hakko Compatible HK SERIES Compatible Stations: Hakko 474, Hakko 475, Hakko 701, Hakko 702B, Hakko 808, Hakko 809 Plato is one of the largest manufacturers of soldering tips in the world, producing tips to fit all of the most popular soldering stations. The long life and fast heat recovery of Plato soldering tips increases user effectiveness and decreases production times. • Fast heat recovering increases soldering speed • Longer tip reduces manufacturing costs • Fewer tip change overs Product Dimensions 800-858-4043 • www.platoproducts.com Rev. A (10/17) Page 1 of 2 HK-0878 Desoldering Tip - Hakko Cross Reference: Hakko A-1002 0.8mm ID, 1.8mm OD 10 units/bag HK-0879 Desoldering Tip - Hakko Cross Reference: Hakko A-1003 1.0mm ID x 2.2mm OD 10 units/bag HK-0880 Desoldering Tip - Hakko Cross Reference: NA 0.8mm ID, 2.3mm OD 10 units/ bag HK-0881 Desoldering Tip - Hakko Cross Reference: Hakko A-1005 1.0mm ID, 2.5mm OD 10 units/ bag HK-0882 Desoldering Tip - Hakko Cross Reference: Hakko A-1005 1.3mm ID x 3.0mm OD 10 units/ bag HK-0883 Desoldering Tip - Hakko Cross Reference: Hakko A-1007 1.5mm ID x 3.0mm OD 10 units/ bag

Desoldering Tips – Hakko Compatible · 2018. 2. 6. · Desoldering Tips – Hakko Compatible HK SERIES Compatible Stations: Hakko 474, Hakko 475, Hakko 701, Hakko 702B, Hakko 808,

Download PDF Report

Upload
others
View
21
Download
1

Embed Size (px)

Citation preview

Page 1: Desoldering Tips – Hakko Compatible · 2018. 2. 6. · Desoldering Tips – Hakko Compatible HK SERIES Compatible Stations: Hakko 474, Hakko 475, Hakko 701, Hakko 702B, Hakko 808,

• Fastheatrecoveringincreasessolderingspeed• Longertipreducesmanufacturingcosts• Fewertipchangeovers

Product Dimensions

800-858-4043 • www.platoproducts.com

Rev. A (10/17) Page 1 of 2

HK-0878 Desoldering Tip - Hakko Cross Reference: Hakko A-1002 0.8mm ID, 1.8mm OD 10 units/bag

HK-0879 Desoldering Tip - Hakko Cross Reference: Hakko A-1003 1.0mm ID x 2.2mm OD 10 units/bag

HK-0880 Desoldering Tip - Hakko Cross Reference: NA 0.8mm ID, 2.3mm OD 10 units/ bag

HK-0881 Desoldering Tip - Hakko Cross Reference: Hakko A-1005 1.0mm ID, 2.5mm OD 10 units/ bag

HK-0882 Desoldering Tip - Hakko Cross Reference: Hakko A-1005 1.3mm ID x 3.0mm OD 10 units/ bag

HK-0883 Desoldering Tip - Hakko Cross Reference: Hakko A-1007 1.5mm ID x 3.0mm OD 10 units/ bag

Desoldering Tips – Hakko Compatible HK SERIES

Rev. A (10/17) Page 2 of 2

NorthAmericaITWContaminationControl-Electronics8125CobbCenterDriveKennesaw,[email protected]

EuropeITWContaminationControlBVSaffierlaan5,[email protected]

CountriesoutsidetheUSCalltolocateadistributorinyourcountry

Important Notice to Purchaser/User: The information in this publication is based on tests that we believe are reliable. The results may vary due to differences in tests type and conditions. We recommend that each user evaluate the product to determine its suitability for the intended application. Conditions of use are outside our control and vary widely. Our only obligation and your only solution is replacement of product that is shown to be defective when you receive it. In no case will we be liable for any special, incidental, or consequential damages based on breach of warranty, negligence or any other theory.

Environmental PolicyWe are committed to developing products to ensure a safer and cleaner environment. We will continue to meet and sustain the regulations of all federal, state and local government agencies.

ResourcesPlato products are supported by a global sales, technical and customer services resources.

For additional technical information on these products or other Plato products in the United States, call the technical sales department at 800-858-4043, email [email protected] or visit our web site at: www.platoproducts.com.