Upload
others
View
7
Download
0
Embed Size (px)
Citation preview
ENERGY STAR Version 7.0 Computers - Desk, Note, IC, Port All-in-one,
Slate/TabletsDesktop and Integrated Desktop Template Name Description Required/ Multiple Data Type
Optional Select
ENERGY STAR R N Enumeration Specification Version Data
Product Type R N Enumeration Data
System Sleep Mode Required if Sleep Mode default time upon shipment is applicable. O N Integer Default Time Upon Shipment (min)
Display Sleep Mode Required if display sleep mode default time upon shipment is applicable. O N Integer Default Time Upon Shipment (min)
Product Marketed as a R N Enumeration Workstation Data
Ethernet Capability R N Enumeration Data
WLAN Capability R N Enumeration Data
Restrictions Enumerations
6.07.0
6.1
Desktop
Notebook
Integrated Desktop
Slate/Tablet
Two-In-One Notebook
Portable All-In-One Computer
Max Value: 30
Max Value: 15
Yes
No
Yes
No
Yes
No
Bluetooth Capability R N Enumeration Data
Yes
No
Reduced Sleep/Off Required if Ethernet Capability is Yes. Indicate Yes if the speed of any active 1 O N Enumeration Yes Ethernet Speed Gb/s or higher Ethernet network links will be reduced to less than 1 Gb/s when Data
transitioning to sleep or off mode. No
Product Sold Through R N Enumeration Yes Enterprise Channels Data
No
Meets Wake R N Enumeration Yes Management Data Requirement No
Not Applicable
WOL (Wake on LAN) Required if Ethernet Capability is Yes. O N Enumeration From Sleep Data
Shipped Enabled Under All Conditions
Shipped Enabled When Operating on Ac Power Only
Shipped Disabled
Shipped Disabled with Both Client OS and Network Controls to Enable Feature
Has the Ability to Enable Required if Ethernet Capability is Yes. O N Enumeration Yes and Disable WOL for Data Sleep Mode No
Product Form Factor R N Enumeration Mini
Small form factor
Mini Tower
Desktop
Product DIMM Count Report installed number of dual in-line memory modules (DIMMs) installed in the product.
R N Integer Min Value: 0
Product PCIex16 Slot Count
Report number of physical 16 lane PCIe slots on the motherboard. R N Integer Min Value: 0
Product PCIex8 Slot Count
Report number of physical 8 lane PCIe slots, including x16 slots wired as x8 slots on the motherboard.
R N Integer Min Value: 0
Product PCIex4 Slot Count
Report number of physical 4 lane PCIe slots, including x16 slots wired as x4 slots on the motherboard.
R N Integer Min Value: 0
Product PCIex1 Slot Count
Report number of physical 1 lane PCIe slots on the motherboard. R N Integer Min Value: 0
Product M.2 Port Count Report number of all M.2 ports on the motherboard. R N Integer Min Value: 0
Product USB 2.0 Port Count
Report number of installed physical USB 2.0 ports. R N Integer Min Value: 0
Product USB 3.0 Port Count
Report number of installed physical USB 3.0 ports. R N Integer Min Value: 0
Product USB 3.1 Gen 1 Port Count
Report number of installed physical USB 3.1 Gen 1 ports. R N Integer Min Value: 0
Product USB 3.1 Gen 2 Port Count
Report number of installed physical USB 3.1 Gen 2 ports. R N Integer Min Value: 0
Product Thunderbolt Port Count
Report number of installed physical Thunderbolt ports. R N Integer Min Value: 0
Product Thunderbolt 2 Port Count
Report number of installed physical Thunderbolt 2 ports. R N Integer Min Value: 0
Product Thunderbolt 3 Port Count
Report number of installed physical Thunderbolt 3 ports. R N Integer Min Value: 0
Product Total USB Header Count
Report total number of physical USB headers designed for use by media readers and/or USB ports which are present on the motherboard. This count includes unoccupied headers present on the motherboard.
R N Integer Min Value: 0
Product SATA and eSATA Port Count
Report the number of physical SATA and eSATA ports on the motherboard. R N Integer Min Value: 0
Product SATA Express Port Count
Report the number of physical SATA Express ports on the motherboard. R N Integer Min Value: 0
Applicable Categories for R Y Enumeration TEC Criteria Data
Category 0 Operating Required for Category 0 models. O Y Enumeration System Name Data
0
I1
I2
I3
D1
D2
Android
Chrome
iOS
Linux
Mac OS X
Mac OS X Server
Other
Solaris 10
Solaris 9
Unix
Windows 2000
Windows 7
Windows 8
Windows 10
Windows CE
Windows Home Server
Windows Server 2008
Windows XP
Category 0 Operating Required for Category 0 models if Operating System Name is Other. O N Text Max Length: System Name Other 1000
Category 0 Processor Required for Category 0 models. For Product Type Slate/Tablet, Processor Brand O N Enumeration AMD Brand will not be included on certified product list. Data
Intel
IBM
Sun
VIA
Other
Category 0 Processor Required for Category 0 models. For Product Type Slate/Tablet, Processor Name O Y Enumeration Athlon Name will not be included on certified product list. Data
Athlon 64
Atom
Celeron
Core i3
Core i5
Core i7
Core2 Duo
Core2 Quad
Core M
FX
Geode
Itanium
Itanium 2
Nano
Neo
Opteron
Other
Pentium
Pentium D
Pentium IV
Phenom X3
Phenom X4
Ryzen 3
Ryzen 5
Ryzen 7
Xeon
Category 0 Processor Required for Category 0 models if Category 0 Processor Name is Other. For O N Text Max Length: Name Other Product Type Slate/Tablet, Processor Name Other will not be included on certified 1000
product list.
Category 0 Multi- Required for Category 0 models. Report yes if installed processor supports four or O N Enumeration Yes Channel Memory more memory channels. Data Support No
Category 0 Installed Required for Category 0 models. Provide the memory actually installed in the O N Decimal No. of System Memory RAM model tested, not the maximum supported. Decimal: 1 (GB) Min Value:
0.0
Category 0 Graphics Required for Category 0 models if graphics adder is applicable, when a device O N Enumeration Category has switchable graphics. Data
G1
G2
G3
G4
G5
G6
G7
Category 0 Switchable Required for Category 0 when a device has both integrated graphics and discrete O N Enumeration Yes Graphics Enabled by graphics. This setting means that the graphics is switched to integrated graphics Data Default in Ac Mode when the graphics demand is low. The OEM can provide guidance on detecting No
what state the graphics is in. This setting is only applicable when a device has both integrated graphics and discrete graphics.
Category 0 Capable of Required for Category 0 models when a device has switchable graphics. O N Enumeration Yes Switchable Graphics in Data Battery Mode No
Category 0 Primary Discrete Graphics Frame Buffer Bandwidth (GB/s)
Category 0 Primary Discrete Graphics Frame Buffer Data Width (bits)
Category 0 Secondary Discrete Graphics Frame Buffer Bandwidth (GB/s)
Category 0 Secondary Discrete Graphics Frame Buffer Data Width (bits)
Category 0 Gigabit Ethernet Ports (count)
Category 0 Energy Efficient Ethernet (EEE)
Desktop Category 0 Number of Storage Drives
Category 0 Number of Integrated Displays (count)
Category 0 Integrated Display Resolution (megapixels)
Category 0 Integrated Display Viewable Screen Area (sq in)
Category 0 Enhanced Performance Display Present
Category 0 Enhanced Perform Disp Diagonal
Required for Category 0 models when a device has discrete graphics. O N
Required for Category 0 models when a device has discrete graphics. O N
Required for Category 0 models when a device has a secondary discrete graphics device installed.
O N
Required for Category 0 models when a device has a secondary discrete graphics device installed.
O N
Required for Category 0 models. O N
Required for Category 0 models. Indicate if Energy Efficient Ethernet is supported.
O N
Required for Category 0 models. O N
Required for Category 0 if integrated display allowance is applicable. O N
Required for Category 0 if integrated display allowance is applicable. If multiple integrated displays, provide average.
O N
Required for Category 0 if integrated display allowance is applicable. If multiple integrated displays, provide average.
O N
Required if for Category 0 Enhanced-performance Display allowance is applicable.
O N
Required if for Category 0 Enhanced-performance Display allowance is applicable. If multiple integrated displays, provide average.
O N
Decimal
Integer
Decimal
Integer
Integer
Enumeration Data
Integer
Integer
Decimal
Decimal
Enumeration Data
Decimal
No. of Decimal: 1
No. of Decimal: 1
Min Value: 0
Yes
No
Min Value: 0
No. of Decimal: 2 Min Value: 0.00
No. of Decimal: 2 Min Value: 0.00
Yes
No
No. of Decimal: 2
Vble Screen Size (in) Min Value: 0.00
Category 0 Internal/External Pwr Supply Efficiency at 10% Load
Required if for Category 0 Power Supply Efficiency allowance is included in test report.
O N Decimal No. of Decimal: 2 Min Value: 0.00 Max Value: 1.00
Category 0 Internal Power Supply Efficiency at 20% Load
Required if for Category 0 internal power supply is present. O N Decimal No. of Decimal: 2 Min Value: 0.00 Max Value: 1.00
Category 0 Internal Power Supply Efficiency at 50% Load
Required if for Category 0 internal power supply is present. O N Decimal No. of Decimal: 2 Min Value: 0.00 Max Value: 1.00
Category 0 Internal Power Supply Efficiency at 100% Load
Required if for Category 0 internal power supply is present. O N Decimal No. of Decimal: 2 Min Value: 0.00 Max Value: 1.00
Category 0 External Power Supply Average Efficiency
Required if for Category 0 Power Supply Efficiency allowance is applicable. Provide the simple average of efficiency at 25%, 50%, 75%, and 100% load.
O N Decimal No. of Decimal: 2 Min Value: 0.00 Max Value: 1.00
Category 0 External/Internal Power Supply Rated Power (W)
Required for Category 0 models. Provide the nameplate output power which is the power output of the power supply as specified on the manufacturer's label on the power supply housing or, if absent from the housing, as specified in documentation provided by the manufacturer.
O N Decimal No. of Decimal: 1 Min Value: 0
Category 0 Physical CPU Cores (count)
Required for Category 0 models. Provide the number of physical - not logical -CPU cores. For Product Type Slate/Tablet, Physical CPU Cores will not be included on certified product list.
O N Integer Min Value: 0
Category 0 CPU Packages (count)
Required for Category 0 models. Provide the number of CPUs/packages. For Product Type Slate/Tablet, CPU Packages will not be included on certified
O N Integer Min Value: 0
Category 0 CPU Base Clock Speed (GHz)
Category 0 CPU Maximum Clock Speed (GHz)
Category 0 Storage Technology
Category 0 Storage Technology Other
Category 0 Performance Score
Category 0 Proxy Support
Category 0 Measured Power in Off at 115 V (W)
Category 0 Measured Power in Off at 230 V (W)
Category 0 User-activated Low-power
product list.
Required for Category 0 models. Provide the base CPU clock speed, not the burst, turbo, maximum, temporary, or intermittent clock speed. For Product Type Slate/Tablet, CPU Base Clock Speed will not be included on certified product list.
Required for Category 0 models. Provide the burst, turbo, maximum, temporary, or intermittent clock speed. For Product Type Slate/Tablet, CPU Maximum Clock Speed will not be included on certified product list.
Required for Category 0 models. Provide the storage technology. Hard Disk Drive includes hybrid hard disk drives with flash component.
Required if Category 0 Storage Technology is Other.
Required for Category 0 models. Performance Score is the product of Category 0 Physical CPU Cores and Category 0 CPU Clock Speed in GHz.
Required for Category 0 models. This is a manufacturer-reported parameter. On Mac computers, “Wake for network access” enabled within the Energy Saver/Power Adapter Preferences signifies Base Capability or better. On Windows computers, “ARP Offload” or “NS Offload” or similar enabled within the Advanced Properties of the Network Interface Card (accessed through the Device Manager) signifies Base Capability or better. OEM can provide further guidance on how to confirm Proxy Support.
Required for Category 0 models tested at 115 V.
Required for Category 0 models tested at 230 V.
Required for Category 0 models. Indicate if model offers Sleep Mode enabled by default or another low-latency user-activated mode or state that preserves
O
O
O
O
O
O
O
O
O
N
N
Y
N
N
N
N
N
N
Decimal
Decimal
Enumeration Data
Text
Decimal
Enumeration Data
Decimal
Decimal
Enumeration Data
No. of Decimal: 1 Min Value: 0.0
No. of Decimal: 1 Min Value: 0.0
Hard Disk Drive
Solid State Drive
Other
Max Length: 1000
No. of Decimal: 1 Min Value: 0.0
Conventional
Base Capability
Remote Wake
Service Discovery/ Name Services
Full Capability
No. of Decimal: 1 Min Value: 0.0
No. of Decimal: 1
Off Mode with Hibernation
Mode Enabled by Default
Category 0 User-activated Low-power Mode Enabled by Dflt Other
Category 0 Long Idle State Pwr Used in Place of Sleep Mode Pwr
Category 0 Measured Power in Sleep at 115 V (W)
Category 0 Measured Power in Sleep at 230 V (W)
Category 0 Measured Power in Long Idle at 115 V (W)
Category 0 Measured Power in Long Idle at 230 V (W)
Category 0 Measured Power in Short Idle at 115 V (W)
Category 0 Additional Measured Power in Short Idle at 115 V (W)
Category 0 Measured Power in Short Idle at 230 V (W)
Category 0 Additional Measured Power in
machine state.
Required if Category 0 User-activated Low-power Mode Enabled by Default is O N Text Other.
Required for Category 0 models. Indicate if Long Idle State power is used in place O N Enumeration of Sleep Mode power when calculating Typical Energy Consumption (TEC). Data
Required for Category 0 models tested at 115 V if model has User-activated Low- O N Decimal power Mode Enabled by Default. Report power in the User-activated Low-power Mode Enabled by Default, if applicable.
Required for Category 0 models tested at 230 V if model has User-activated Low- O N Decimal power Behavior Enabled by Default. Report power in the User-activated Low-power Mode Enabled by Default, if applicable.
Required for Category 0 models tested at 115 V. O N Decimal
Required for Category 0 models tested at 230 V. O N Decimal
Required for Category 0 models tested at 115 V. O N Decimal
Required if Product Type is Notebook or Two-In-One Notebook for Category 0 O N Decimal models tested at 115 V. The display brightness for this additional measurement shall be 150cd/m sq.
Required for Category 0 models tested at 230 V. O N Decimal
Required if Product Type is Notebook or Two-In-One Notebook for Category 0 O N Decimal models tested at 230 V. The display brightness for this additional measurement
Sleep Mode
Connected Sleep
Other
None
Max Length: 1000
Yes
No
No. of Decimal: 1
No. of Decimal: 1
No. of Decimal: 1
No. of Decimal: 1
No. of Decimal: 1
No. of Decimal: 1 Min Value: 0
No. of Decimal: 1
No. of Decimal: 1
Short Idle at 230 V (W) shall be 150cd/m sq.
Reported Category 0 Required for Category 0 models tested at 115 V. Provide the Typical Energy O N Decimal TEC at 115 V (kWh) Consumption (TEC) which will appear on the ENERGY STAR list of certified
products.
Reported Category 0 Required for Category 0 models tested at 230 V. O N Decimal TEC at 230 V (kWh)
Category 0 Base TEC Required for Category 0 models. O N Integer Allowance
Category 0 Functional Required for Category 0 models. If no capability adjustments, indicate zero. O N Decimal Adder Allowances (kWh)
Category 0 Maximum Required for Category 0 models. If no functional adders, indicate Base TEC O N Decimal TEC Requirement (Etec Allowance. max) (kWh)
Category I1 Operating Required for Category I1 models. O Y Enumeration System Name Data
Min Value: 0
No. of Decimal: 1
No. of Decimal: 1
Min Value: 14 Max Value: 135
No. of Decimal: 1
No. of Decimal: 1
Android
Chrome
iOS
Linux
Mac OS X
Mac OS X Server
Other
Solaris 10
Solaris 9
Unix
Windows 2000
Windows 7
Windows 8
Windows 10
Windows CE
Windows Home Server
Windows Server 2008
Windows XP
Category I1 Operating System Name Other
Required for Category I1 models if Operating System Name is Other. O N Text Max Length: 1000
Category I1 Processor Brand
Required for Category I1 models. For Product Type Slate/Tablet, Processor Brand will not be included on certified product list.
O N Enumeration Data
AMD
Intel
IBM
Sun
VIA
Other
Category I1 Processor Name
Required for Category I1 models. For Product Type Slate/Tablet, Processor Name will not be included on certified product list.
O Y Enumeration Data
Athlon
Athlon 64
Atom
Celeron
Core i3
Core i5
Core i7
Core2 Duo
Core2 Quad
Core M
FX
Geode
Itanium
Itanium 2
Category I1 Processor Required for Category I1 models if Category I1 Processor Name is Other. For O N Text Name Other Product Type Slate/Tablet, Processor Name Other will not be included on certified
product list.
Category I1 Multi- Required for Category I1 models. Report yes if installed processor supports four O N Enumeration Channel Memory or more memory channels. Data Support
Category I1 Installed Required for Category I1 models. Provide the memory actually installed in the O N Decimal System Memory RAM model tested, not the maximum supported. (GB)
Category I1 Graphics Required for Category I1 models if graphics adder is applicable, when a device O N Enumeration Category has switchable graphics. Data
Nano
Neo
Opteron
Other
Pentium
Pentium D
Pentium IV
Phenom X3
Phenom X4
Ryzen 3
Ryzen 5
Ryzen 7
Xeon
Max Length: 1000
Yes
No
No. of Decimal: 1 Min Value: 0.0
G1
G2
G3
G4
G5
G6
Category I1 Switchable Required for Category I1 when a device has both integrated graphics and discrete O N Enumeration Graphics Enabled by graphics. This setting means that the graphics is switched to integrated graphics Data Default in Ac Mode when the graphics demand is low. The OEM can provide guidance on detecting
what state the graphics is in. This setting is only applicable when a device has both integrated graphics and discrete graphics.
Category I1 Capable of Required for Category I1 models when a device has switchable graphics. O N Enumeration Switchable Graphics in Data Battery Mode
Category I1 Primary Required for Category I1 models when a device has switchable graphics. O N Decimal Discrete Graphics Frame Buffer Bandwidth (GB/s)
Category I1 Primary Required for Category I1 models when a device has switchable graphics. O N Integer Discrete Graphics Frame Buffer Data Width (bits)
Category I1 Secondary Required for Category I1 models when a device has a secondary discrete O N Decimal Discrete Graphics Frame graphics device installed. Buffer Bandwidth (GB/s)
Category I1 Secondary Required for Category I1 models when a device has a secondary discrete O N Integer Discrete Graphics Frame graphics device installed. Buffer Data Width (bits)
Category I1 Gigabit Required for Category I1 models. O N Integer Ethernet Ports (count)
Category I1 Energy Required for Category I1 models. Indicate if Energy Efficient Ethernet is O N Enumeration Efficient Ethernet (EEE) supported. Data
Category I1 Number of Required for Category I1 models. O N Integer Storage Drives
Category I1 Number of Required for Category I1 if integrated display allowance is applicable. O N Integer Integrated Displays (count)
Category I1 Integrated Required for Category I1 if integrated display allowance is applicable. If multiple O N Decimal Display Resolution integrated displays, provide average. (megapixels)
G7
Yes
No
Yes
No
No. of Decimal: 1
No. of Decimal: 1
Min Value: 0
Yes
No
Min Value: 0
No. of Decimal: 2 Min Value: 0.00
Category I1 Integrated Required for Category I1 if integrated display allowance is applicable. If multiple O N Decimal No. of Display Viewable Screen integrated displays, provide average. Decimal: 2 Area (sq in) Min Value:
0.00
Category I1 Enhanced Required if for Category I1 Enhanced-performance Display allowance is O N Enumeration Yes Performance Display applicable. Data Present No
Category I1 Enhanced Perform Disp Diagonal Vble Screen Size (in)
Required if for Category I1 Enhanced-performance Display allowance is applicable. If multiple integrated displays, provide average.
O N Decimal No. of Decimal: 2 Min Value: 0.00
Category I1 Internal/External Pwr Supply Efficiency at 10% Load
Required if for Category I1 Power Supply Efficiency allowance is included in test report.
O N Decimal No. of Decimal: 2 Min Value: 0.00 Max Value: 1.00
Category I1 Internal Power Supply Efficiency at 20% Load
Required if for Category I1 internal power supply is present. O N Decimal No. of Decimal: 2 Min Value: 0.00 Max Value: 1.00
Category I1 Internal Power Supply Efficiency at 50% Load
Required if for Category I1 internal power supply is present. O N Decimal No. of Decimal: 2 Min Value: 0.00 Max Value: 1.00
Category I1 Internal Power Supply Efficiency at 100% Load
Required if for Category I1 internal power supply is present. O N Decimal No. of Decimal: 2 Min Value: 0.00 Max Value: 1.00
Category I1 External Power Supply Average Efficiency
Required if for Category I1 Power Supply Efficiency allowance is applicable. Provide the simple average of efficiency at 25%, 50%, 75%, and 100% load.
O N Decimal No. of Decimal: 2 Min Value: 0.00 Max Value: 1.00
Category I1 Required for Category I1 models. Provide the nameplate output power which is O N External/Internal Power the power output of the power supply as specified on the manufacturer's label on Supply Rated Power (W) the power supply housing or, if absent from the housing, as specified in
documentation provided by the manufacturer.
Category I1 Physical Required for Category I1 models. Provide the number of physical - not logical - O N CPU Cores (count) CPU cores. For Product Type Slate/Tablet, Physical CPU Cores will not be
included on certified product list.
Category I1 CPU Required for Category I1 models. Provide the number of CPUs/packages. For O N Packages (count) Product Type Slate/Tablet, CPU Packages will not be included on certified
product list.
Category I1 CPU Base Required for Category I1 models. Provide the base CPU clock speed, not the O N Clock Speed (GHz) burst, turbo, maximum, temporary, or intermittent clock speed. For Product Type
Slate/Tablet, CPU Base Clock Speed will not be included on certified product list.
Category I1 CPU Required for Category I1 models. Provide the burst, turbo, maximum, temporary, O N Maximum Clock Speed or intermittent clock speed. For Product Type Slate/Tablet, CPU Maximum Clock (GHz) Speed will not be included on certified product list.
Category I1 Storage Required for Category I1 models. Provide the storage technology. Hard Disk O Y Technology Drive includes hybrid hard disk drives with flash component.
Category I1 Storage Required if Category I1 Storage Technology is Other. O N Technology Other
Category I1 Performance Required for Category I1 models. Performance Score is the product of Category O N Score I1 Physical CPU Cores and Category I1 CPU Clock Speed in GHz.
Category I1 Proxy Required for Category I1 models. This is a manufacturer-reported parameter. On O N Support Mac computers, “Wake for network access” enabled within the Energy
Saver/Power Adapter Preferences signifies Base Capability or better. On Windows computers, “ARP Offload” or “NS Offload” or similar enabled within the Advanced Properties of the Network Interface Card (accessed through the Device Manager) signifies Base Capability or better. OEM can provide further guidance on how to confirm Proxy Support.
Decimal
Integer
Integer
Decimal
Decimal
Enumeration Data
Text
Decimal
Enumeration Data
No. of Decimal: 1 Min Value: 0
Min Value: 0
Min Value: 0
No. of Decimal: 1 Min Value: 0.0
No. of Decimal: 1 Min Value: 0.0
Hard Disk Drive
Solid State Drive
Other
Max Length: 1000
No. of Decimal: 1 Min Value: 0.0
Conventional
Base Capability
Remote Wake
Service Discovery/ Name Services
Full Capability
Category I1 Measured Power in Off at 115 V (W)
Category I1 Measured Power in Off at 230 V (W)
Category I1 User-activated Low-power Mode Enabled by Default
Category I1 User-activated Low-power Mode Enabled by Dflt Other
Category I1 Long Idle State Pwr Used in Place of Sleep Mode Pwr
Category I1 Measured Power in Sleep at 115 V (W)
Category I1 Measured Power in Sleep at 230 V (W)
Category I1 Measured Power in Long Idle at 115 V (W)
Category I1 Measured Power in Long Idle at 230 V (W)
Category I1 Measured Power in Short Idle at 115 V (W)
Required for Category I1 models tested at 115 V.
Required for Category I1 models tested at 230 V.
Required for Category I1 models. Indicate if model offers Sleep Mode enabled by default or another low-latency user-activated mode or state that preserves machine state.
Required if Category I1 User-activated Low-power Mode Enabled by Default is Other.
Required for Category I1 models. Indicate if Long Idle State power is used in place of Sleep Mode power when calculating Typical Energy Consumption (TEC).
Required for Category I1 models tested at 115 V if model has User-activated Low-power Mode Enabled by Default. Report power in the User-activated Low-power Mode Enabled by Default, if applicable.
Required for Category I1 models tested at 230 V if model has User-activated Low-power Behavior Enabled by Default. Report power in the User-activated Low-power Mode Enabled by Default, if applicable.
Required for Category I1 models tested at 115 V.
Required for Category I1 models tested at 230 V.
Required for Category I1 models tested at 115 V.
O
O
O
O
O
O
O
O
O
O
N
N
N
N
N
N
N
N
N
N
Decimal
Decimal
Enumeration Data
Text
Enumeration Data
Decimal
Decimal
Decimal
Decimal
Decimal
No. of Decimal: 1 Min Value: 0.0
No. of Decimal: 1
Off Mode with Hibernation
Sleep Mode
Connected Sleep
Other
None
Max Length: 1000
Yes
No
No. of Decimal: 1
No. of Decimal: 1
No. of Decimal: 1
No. of Decimal: 1
No. of Decimal: 1
Category I1 Additional Required if Product Type is Notebook or Two-In-One Notebook for Category I1 O N Measured Power in models tested at 115 V. The display brightness for this additional measurement Short Idle at 115 V (W) shall be 150cd/m sq.
Category I1 Measured Required for Category I1 models tested at 230 V. O N Power in Short Idle at 230 V (W)
Category I1 Additional Required if Product Type is Notebook or Two-In-One Notebook for Category I1 O N Measured Power in models tested at 230 V. The display brightness for this additional measurement Short Idle at 230 V (W) shall be 150cd/m sq.
Reported Category I1 Required for Category I1 models tested at 115 V. Provide the Typical Energy O N TEC at 115 V (kWh) Consumption (TEC) which will appear on the ENERGY STAR list of certified
products.
Reported Category I1 Required for Category I1 models tested at 230 V. O N TEC at 230 V (kWh)
Category I1 Base TEC Required for Category I1 models. O N Allowance
Category I1 Functional Required for Category I1 models. If no capability adjustments, indicate zero. O N Adder Allowances (kWh)
Category I1 Maximum Required for Category I1 models. If no functional adders, indicate Base TEC O N TEC Requirement (Etec Allowance. max) (kWh)
Category I2 Operating Required for Category I2 models. O Y System Name
Decimal
Decimal
Decimal
Decimal
Decimal
Integer
Decimal
Decimal
Enumeration Data
No. of Decimal: 1 Min Value: 0
No. of Decimal: 1
No. of Decimal: 1 Min Value: 0
No. of Decimal: 1
No. of Decimal: 1
Min Value: 14 Max Value: 135
No. of Decimal: 1
No. of Decimal: 1
Android
Chrome
iOS
Linux
Mac OS X
Mac OS X Server
Other
Solaris 10
Solaris 9
Unix
Windows 2000
Windows 7
Windows 8
Windows 10
Windows CE
Windows Home Server
Windows Server 2008
Windows XP
Category I2 Operating System Name Other
Required for Category I2 models if Operating System Name is Other. O N Text Max Length: 1000
Category I2 Processor Required for Category I2 models. For Product Type Slate/Tablet, Processor O N Enumeration AMD Brand Brand will not be included on certified product list. Data
Intel
IBM
Sun
VIA
Other
Category I2 Processor Required for Category I2 models. For Product Type Slate/Tablet, Processor O Y Enumeration Athlon Name Name will not be included on certified product list. Data
Athlon 64
Atom
Celeron
Core i3
Core i5
Core i7
Core2 Duo
Category I2 Processor Required for Category I2 models if Category I2 Processor Name is Other. For O N Text Name Other Product Type Slate/Tablet, Processor Name Other will not be included on certified
product list.
Category I2 Multi- Required for Category I2 models. Report yes if installed processor supports four O N Enumeration Channel Memory or more memory channels. Data Support
Category I2 Installed Required for Category I2 models. Provide the memory actually installed in the O N Decimal System Memory RAM model tested, not the maximum supported. (GB)
Core2 Quad
Core M
FX
Geode
Itanium
Itanium 2
Nano
Neo
Opteron
Other
Pentium
Pentium D
Pentium IV
Phenom X3
Phenom X4
Ryzen 3
Ryzen 5
Ryzen 7
Xeon
Max Length: 1000
Yes
No
No. of Decimal: 1 Min Value: 0.0
Category I2 Graphics Category
Category I2 Switchable Graphics Enabled by Default in Ac Mode
Category I2 Capable of Switchable Graphics in Battery Mode
Category I2 Primary Discrete Graphics Frame Buffer Bandwidth (GB/s)
Category I2 Primary Discrete Graphics Frame Buffer Data Width (bits)
Category I2 Secondary Discrete Graphics Frame Buffer Bandwidth (GB/s)
Category I2 Secondary Discrete Graphics Frame Buffer Data Width (bits)
Category I2 Gigabit Ethernet Ports (count)
Category I2 Energy Efficient Ethernet (EEE)
Category I2 Number of
Required for Category I2 models if graphics adder is applicable, when a device has switchable graphics.
Required for Category I2 when a device has both integrated graphics and discrete graphics. This setting means that the graphics is switched to integrated graphics when the graphics demand is low. The OEM can provide guidance on detecting what state the graphics is in. This setting is only applicable when a device has both integrated graphics and discrete graphics.
Required for Category I2 models when a device has switchable graphics.
Required for Category I2 models when a device has switchable graphics.
Required for Category I2 models when a device has switchable graphics.
Required for Category I2 models when a device has a secondary discrete graphics device installed.
Required for Category I2 models when a device has a secondary discrete graphics device installed.
Required for Category I2 models.
Required for Category I2 models. Indicate if Energy Efficient Ethernet is supported.
Required for Category I2 models.
O
O
O
O
O
O
O
O
O
O
N
N
N
N
N
N
N
N
N
N
Enumeration Data
Enumeration Data
Enumeration Data
Decimal
Integer
Decimal
Integer
Integer
Enumeration Data
Integer
G1
G2
G3
G4
G5
G6
G7
Yes
No
Yes
No
No. of Decimal: 1
No. of Decimal: 1
Min Value: 0
Yes
No
Min Value:
Storage Drives
Category I2 Number of Required for Category I2 if integrated display allowance is applicable. O N Integer Integrated Displays (count)
Category I2 Integrated Required for Category I2 if integrated display allowance is applicable. If multiple O N Decimal Display Resolution integrated displays, provide average. (megapixels)
Category I2 Integrated Required for Category I2 if integrated display allowance is applicable. If multiple O N Decimal Display Viewable Screen integrated displays, provide average. Area (sq in)
Category I2 Enhanced Required if for Category I2 Enhanced-performance Display allowance is O N Enumeration Performance Display applicable. Data Present
Category I2 Enhanced Required if for Category I2 Enhanced-performance Display allowance is O N Decimal Perform Disp Diagonal applicable. If multiple integrated displays, provide average. Vble Screen Size (in)
Category I2 Required if for Category I2 Power Supply Efficiency allowance is included in test O N Decimal Internal/External Pwr report. Supply Efficiency at 10% Load
Category I2 Internal Required if for Category I2 internal power supply is present. O N Decimal Power Supply Efficiency at 20% Load
Category I2 Internal Required if for Category I2 internal power supply is present. O N Decimal Power Supply Efficiency at 50% Load
Category I2 Internal Required if for Category I2 internal power supply is present. O N Decimal Power Supply Efficiency
0
No. of Decimal: 2 Min Value: 0.00
No. of Decimal: 2 Min Value: 0.00
Yes
No
No. of Decimal: 2 Min Value: 0.00
No. of Decimal: 2 Min Value: 0.00 Max Value: 1.00
No. of Decimal: 2 Min Value: 0.00 Max Value: 1.00
No. of Decimal: 2 Min Value: 0.00 Max Value: 1.00
No. of Decimal: 2
at 100% Load
Category I2 External Required if for Category I2 Power Supply Efficiency allowance is applicable. O N Decimal Power Supply Average Provide the simple average of efficiency at 25%, 50%, 75%, and 100% load. Efficiency
Category I2 Required for Category I2 models. Provide the nameplate output power which is O N Decimal External/Internal Power the power output of the power supply as specified on the manufacturer's label on Supply Rated Power (W) the power supply housing or, if absent from the housing, as specified in
documentation provided by the manufacturer.
Category I2 Physical Required for Category I2 models. Provide the number of physical - not logical - O N Integer CPU Cores (count) CPU cores. For Product Type Slate/Tablet, Physical CPU Cores will not be
included on certified product list.
Category I2 CPU Required for Category I2 models. Provide the number of CPUs/packages. For O N Integer Packages (count) Product Type Slate/Tablet, CPU Packages will not be included on certified
product list.
Category I2 CPU Base Required for Category I2 models. Provide the base CPU clock speed, not the O N Decimal Clock Speed (GHz) burst, turbo, maximum, temporary, or intermittent clock speed. For Product Type
Slate/Tablet, CPU Base Clock Speed will not be included on certified product list.
Category I2 CPU Required for Category I2 models. Provide the burst, turbo, maximum, temporary, O N Decimal Maximum Clock Speed or intermittent clock speed. For Product Type Slate/Tablet, CPU Maximum Clock (GHz) Speed will not be included on certified product list.
Category I2 Storage Required for Category I2 models. Provide the storage technology. Hard Disk O Y Enumeration Technology Drive includes hybrid hard disk drives with flash component. Data
Category I2 Storage Required if Category I2 Storage Technology is Other. O N Text Technology Other
Category I2 Performance Required for Category I2 models. Performance Score is the product of Category O N Decimal Score I2 Physical CPU Cores and Category I2 CPU Clock Speed in GHz.
Min Value: 0.00 Max Value: 1.00
No. of Decimal: 2 Min Value: 0.00 Max Value: 1.00
No. of Decimal: 1 Min Value: 0
Min Value: 0
Min Value: 0
No. of Decimal: 1 Min Value: 0.0
No. of Decimal: 1 Min Value: 0.0
Hard Disk Drive
Solid State Drive
Other
Max Length: 1000
No. of Decimal: 1 Min Value: 0.0
Category I2 Proxy Support
Category I2 Measured Power in Off at 115 V (W)
Category I2 Measured Power in Off at 230 V (W)
Category I2 User-activated Low-power Mode Enabled by Default
Category I2 User- Required if Category I2 User-activated Low-power Mode Enabled by Default is activated Low-power Other. Mode Enabled by Dflt Other
Category I2 Long Idle Required for Category I2 models. Indicate if Long Idle State power is used in State Pwr Used in Place place of Sleep Mode power when calculating Typical Energy Consumption (TEC). of Sleep Mode Pwr
Category I2 Measured Required for Category I2 models tested at 115 V if model has User-activated Power in Sleep at 115 V Low-power Mode Enabled by Default. Report power in the User-activated Low-(W) power Mode Enabled by Default, if applicable.
Category I2 Measured Required for Category I2 models tested at 230 V if model has User-activated Power in Sleep at 230 V Low-power Behavior Enabled by Default. Report power in the User-activated (W) Low-power Mode Enabled by Default, if applicable.
Required for Category I2 models. This is a manufacturer-reported parameter. On Mac computers, “Wake for network access” enabled within the Energy Saver/Power Adapter Preferences signifies Base Capability or better. On Windows computers, “ARP Offload” or “NS Offload” or similar enabled within the Advanced Properties of the Network Interface Card (accessed through the Device Manager) signifies Base Capability or better. OEM can provide further guidance on how to confirm Proxy Support.
Required for Category I2 models tested at 115 V.
Required for Category I2 models tested at 230 V.
Required for Category I2 models. Indicate if model offers Sleep Mode enabled by default or another low-latency user-activated mode or state that preserves machine state.
O
O
O
O
O
O
O
O
N
N
N
N
N
N
N
N
Enumeration Data
Decimal
Decimal
Enumeration Data
Text
Enumeration Data
Decimal
Decimal
Conventional
Base Capability
Remote Wake
Service Discovery/ Name Services
Full Capability
No. of Decimal: 1 Min Value: 0.0
No. of Decimal: 1
Off Mode with Hibernation
Sleep Mode
Connected Sleep
Other
None
Max Length: 1000
Yes
No
No. of Decimal: 1
No. of Decimal: 1
Category I2 Measured Required for Category I2 models tested at 115 V. O N Power in Long Idle at 115 V (W)
Category I2 Measured Required for Category I2 models tested at 230 V. O N Power in Long Idle at 230 V (W)
Category I2 Measured Required for Category I2 models tested at 115 V. O N Power in Short Idle at 115 V (W)
Category I2 Additional Required if Product Type is Notebook or Two-In-One Notebook for Category I2 O N Measured Power in models tested at 115 V. The display brightness for this additional measurement Short Idle at 115 V (W) shall be 150cd/m sq.
Category I2 Measured Required for Category I2 models tested at 230 V. O N Power in Short Idle at 230 V (W)
Category I2 Additional Required if Product Type is Notebook or Two-In-One Notebook for Category I2 O N Measured Power in models tested at 230 V. The display brightness for this additional measurement Short Idle at 230 V (W) shall be 150cd/m sq.
Reported Category I2 Required for Category I2 models tested at 115 V. Provide the Typical Energy O N TEC at 115 V (kWh) Consumption (TEC) which will appear on the ENERGY STAR list of certified
products.
Reported Category I2 Required for Category I2 models tested at 230 V. O N TEC at 230 V (kWh)
Category I2 Base TEC Required for Category I2 models. O N Allowance
Category I2 Functional Required for Category I2 models. If no capability adjustments, indicate zero. O N Adder Allowances (kWh)
Category I2 Maximum Required for Category I2 models. If no functional adders, indicate Base TEC O N TEC Requirement (Etec Allowance. max) (kWh)
Category I3 Operating Required for Category I3 models. O Y System Name
Decimal
Decimal
Decimal
Decimal
Decimal
Decimal
Decimal
Decimal
Integer
Decimal
Decimal
Enumeration Data
No. of Decimal: 1
No. of Decimal: 1
No. of Decimal: 1
No. of Decimal: 1 Min Value: 0
No. of Decimal: 1
No. of Decimal: 1 Min Value: 0
No. of Decimal: 1
No. of Decimal: 1
Min Value: 14 Max Value: 135
No. of Decimal: 1
No. of Decimal: 1
Android
Chrome
iOS
Linux
Mac OS X
Mac OS X Server
Other
Solaris 10
Solaris 9
Unix
Windows 2000
Windows 7
Windows 8
Windows 10
Windows CE
Windows Home Server
Windows Server 2008
Windows XP
Category I3 Operating System Name Other
Required for Category I3 models if Operating System Name is Other. O N Text Max Length: 1000
Category I3 Processor Required for Category I3 models. For Product Type Slate/Tablet, Processor O N Enumeration AMD Brand Brand will not be included on certified product list. Data
Intel
IBM
Sun
VIA
Other
Category I3 Processor Required for Category I3 models. For Product Type Slate/Tablet, Processor O Y Enumeration Athlon Name Name will not be included on certified product list. Data
Athlon 64
Atom
Celeron
Core i3
Core i5
Core i7
Core2 Duo
Core2 Quad
Core M
FX
Geode
Itanium
Itanium 2
Nano
Neo
Opteron
Other
Pentium
Pentium D
Pentium IV
Phenom X3
Phenom X4
Ryzen 3
Ryzen 5
Ryzen 7
Xeon
Category I3 Processor Required for Category I3 models if Category I3 Processor Name is Other. For O N Text Max Length:
Name Other
Category I3 Multi-Channel Memory Support
Category I3 Installed System Memory RAM (GB)
Category I3 Graphics Category
Category I3 Switchable Graphics Enabled by Default in Ac Mode
Category I3 Capable of Switchable Graphics in Battery Mode
Category I3 Primary Discrete Graphics Frame Buffer Bandwidth (GB/s)
Category I3 Primary Discrete Graphics Frame Buffer Data Width (bits)
Category I3 Secondary Discrete Graphics Frame Buffer Bandwidth (GB/s)
Product Type Slate/Tablet, Processor Name Other will not be included on certified product list.
Required for Category I3 models. Report yes if installed processor supports four or more memory channels.
Required for Category I3 models. Provide the memory actually installed in the model tested, not the maximum supported.
Required for Category I3 models if graphics adder is applicable, when a device has switchable graphics.
Required for Category I3 when a device has both integrated graphics and discrete graphics. This setting means that the graphics is switched to integrated graphics when the graphics demand is low. The OEM can provide guidance on detecting what state the graphics is in. This setting is only applicable when a device has both integrated graphics and discrete graphics.
Required for Category I3 models when a device has switchable graphics.
Required for Category I3 models when a device has switchable graphics.
Required for Category I3 models when a device has switchable graphics.
Required for Category I3 models when a device has a secondary discrete graphics device installed.
O
O
O
O
O
O
O
O
N
N
N
N
N
N
N
N
Enumeration Data
Decimal
Enumeration Data
Enumeration Data
Enumeration Data
Decimal
Integer
Decimal
1000
Yes
No
No. of Decimal: 1 Min Value: 0.0
G1
G2
G3
G4
G5
G6
G7
Yes
No
Yes
No
No. of Decimal: 1
No. of Decimal: 1
Category I3 Secondary Required for Category I3 models when a device has a secondary discrete O N Integer Discrete Graphics Frame graphics device installed. Buffer Data Width (bits)
Category I3 Gigabit Required for Category I3 models. O N Integer Ethernet Ports (count)
Category I3 Energy Required for Category I3 models. Indicate if Energy Efficient Ethernet is O N Enumeration Efficient Ethernet (EEE) supported. Data
Category I3 Number of Required for Category I3 models. O N Integer Storage Drives
Category I3 Number of Required for Category I3 if integrated display allowance is applicable. O N Integer Integrated Displays (count)
Category I3 Integrated Required for Category I3 if integrated display allowance is applicable. If multiple O N Decimal Display Resolution integrated displays, provide average. (megapixels)
Category I3 Integrated Required for Category I3 if integrated display allowance is applicable. If multiple O N Decimal Display Viewable Screen integrated displays, provide average. Area (sq in)
Category I3 Enhanced Required if for Category I3 Enhanced-performance Display allowance is O N Enumeration Performance Display applicable. Data Present
Category I3 Enhanced Required if for Category I3 Enhanced-performance Display allowance is O N Decimal Perform Disp Diagonal applicable. If multiple integrated displays, provide average. Vble Screen Size (in)
Category I3 Required if for Category I3 Power Supply Efficiency allowance is included in test O N Decimal Internal/External Pwr report. Supply Efficiency at 10% Load
Category I3 Internal Required if for Category I3 internal power supply is present. O N Decimal Power Supply Efficiency at 20% Load
Min Value: 0
Yes
No
Min Value: 0
No. of Decimal: 2 Min Value: 0.00
No. of Decimal: 2 Min Value: 0.00
Yes
No
No. of Decimal: 2 Min Value: 0.00
No. of Decimal: 2 Min Value: 0.00 Max Value: 1.00
No. of Decimal: 2 Min Value:
0.00 Max Value: 1.00
Category I3 Internal Power Supply Efficiency at 50% Load
Required if for Category I3 internal power supply is present. O N Decimal No. of Decimal: 2 Min Value: 0.00 Max Value: 1.00
Category I3 Internal Power Supply Efficiency at 100% Load
Required if for Category I3 internal power supply is present. O N Decimal No. of Decimal: 2 Min Value: 0.00 Max Value: 1.00
Category I3 External Power Supply Average Efficiency
Required if for Category I3 Power Supply Efficiency allowance is applicable. Provide the simple average of efficiency at 25%, 50%, 75%, and 100% load.
O N Decimal No. of Decimal: 2 Min Value: 0.00 Max Value: 1.00
Category I3 External/Internal Power Supply Rated Power (W)
Required for Category I3 models. Provide the nameplate output power which is the power output of the power supply as specified on the manufacturer's label on the power supply housing or, if absent from the housing, as specified in documentation provided by the manufacturer.
O N Decimal No. of Decimal: 1 Min Value: 0
Category I3 Physical CPU Cores (count)
Required for Category I3 models. Provide the number of physical - not logical -CPU cores. For Product Type Slate/Tablet, Physical CPU Cores will not be included on certified product list.
O N Integer Min Value: 0
Category I3 CPU Packages (count)
Required for Category I3 models. Provide the number of CPUs/packages. For Product Type Slate/Tablet, CPU Packages will not be included on certified product list.
O N Integer Min Value: 0
Category I3 CPU Base Clock Speed (GHz)
Required for Category I3 models. Provide the base CPU clock speed, not the burst, turbo, maximum, temporary, or intermittent clock speed. For Product Type Slate/Tablet, CPU Base Clock Speed will not be included on certified product list.
O N Decimal No. of Decimal: 1 Min Value: 0.0
Category I3 CPU Maximum Clock Speed (GHz)
Required for Category I3 models. Provide the burst, turbo, maximum, temporary, or intermittent clock speed. For Product Type Slate/Tablet, CPU Maximum Clock Speed will not be included on certified product list.
O N Decimal No. of Decimal: 1 Min Value: 0.0
Category I3 Storage Technology
Category I3 Storage Technology Other
Category I3 Performance Score
Category I3 Proxy Support
Category I3 Measured Power in Off at 115 V (W)
Category I3 Measured Power in Off at 230 V (W)
Category I3 User-activated Low-power Mode Enabled by Default
Category I3 User-activated Low-power Mode Enabled by Dflt
Required for Category I3 models. Provide the storage technology. Hard Disk Drive includes hybrid hard disk drives with flash component.
Required if Category I3 Storage Technology is Other.
Required for Category I3 models. Performance Score is the product of Category I3 Physical CPU Cores and Category I3 CPU Clock Speed in GHz.
Required for Category I3 models. This is a manufacturer-reported parameter. On Mac computers, “Wake for network access” enabled within the Energy Saver/Power Adapter Preferences signifies Base Capability or better. On Windows computers, “ARP Offload” or “NS Offload” or similar enabled within the Advanced Properties of the Network Interface Card (accessed through the Device Manager) signifies Base Capability or better. OEM can provide further guidance on how to confirm Proxy Support.
Required for Category I3 models tested at 115 V.
Required for Category I3 models tested at 230 V.
Required for Category I3 models. Indicate if model offers Sleep Mode enabled by default or another low-latency user-activated mode or state that preserves machine state.
Required if Category I3 User-activated Low-power Mode Enabled by Default is Other.
O Y Enumeration Data
O N Text
O N Decimal
O N Enumeration Data
O N Decimal
O N Decimal
O N Enumeration Data
O N Text
Hard Disk Drive
Solid State Drive
Other
Max Length: 1000
No. of Decimal: 1 Min Value: 0.0
Conventional
Base Capability
Remote Wake
Service Discovery/ Name Services
Full Capability
No. of Decimal: 1 Min Value: 0.0
No. of Decimal: 1
Off Mode with Hibernation
Sleep Mode
Connected Sleep
Other
None
Max Length: 1000
Other
Category I3 Long Idle Required for Category I3 models. Indicate if Long Idle State power is used in O N Enumeration State Pwr Used in Place place of Sleep Mode power when calculating Typical Energy Consumption (TEC). Data of Sleep Mode Pwr
Category I3 Measured Required for Category I3 models tested at 115 V if model has User-activated O N Decimal Power in Sleep at 115 V Low-power Mode Enabled by Default. Report power in the User-activated Low-(W) power Mode Enabled by Default, if applicable.
Category I3 Measured Required for Category I3 models tested at 230 V if model has User-activated O N Decimal Power in Sleep at 230 V Low-power Behavior Enabled by Default. Report power in the User-activated (W) Low-power Mode Enabled by Default, if applicable.
Category I3 Measured Required for Category I3 models tested at 115 V. O N Decimal Power in Long Idle at 115 V (W)
Category I3 Measured Required for Category I3 models tested at 230 V. O N Decimal Power in Long Idle at 230 V (W)
Category I3 Measured Required for Category I3 models tested at 115 V. O N Decimal Power in Short Idle at 115 V (W)
Category I3 Additional Required if Product Type is Notebook or Two-In-One Notebook for Category I3 O N Decimal Measured Power in models tested at 115 V. The display brightness for this additional measurement Short Idle at 115 V (W) shall be 150cd/m sq.
Category I3 Measured Required for Category I3 models tested at 230 V. O N Decimal Power in Short Idle at 230 V (W)
Category I3 Additional Required if Product Type is Notebook or Two-In-One Notebook for Category I3 O N Decimal Measured Power in models tested at 230 V. The display brightness for this additional measurement Short Idle at 230 V (W) shall be 150cd/m sq.
Reported Category I3 Required for Category I3 models tested at 115 V. Provide the Typical Energy O N Decimal TEC at 115 V (kWh) Consumption (TEC) which will appear on the ENERGY STAR list of certified
products.
Reported Category I3 Required for Category I3 models tested at 230 V. O N Decimal TEC at 230 V (kWh)
Category I3 Base TEC Required for Category I3 models. O N Integer
Yes
No
No. of Decimal: 1
No. of Decimal: 1
No. of Decimal: 1
No. of Decimal: 1
No. of Decimal: 1
No. of Decimal: 1 Min Value: 0
No. of Decimal: 1
No. of Decimal: 1 Min Value: 0
No. of Decimal: 1
No. of Decimal: 1
Min Value:
Allowance 14 Max Value: 135
Category I3 Functional Required for Category I3 models. If no capability adjustments, indicate zero. O N Decimal No. of Adder Allowances (kWh) Decimal: 1
Category I3 Maximum Required for Category I3 models. If no functional adders, indicate Base TEC O N Decimal No. of TEC Requirement (Etec Allowance. Decimal: 1 max) (kWh)
Category D1 Operating Required for Category D1 models. O Y Enumeration Android System Name Data
Chrome
iOS
Linux
Mac OS X
Mac OS X Server
Other
Solaris 10
Solaris 9
Unix
Windows 2000
Windows 7
Windows 8
Windows 10
Windows CE
Windows Home Server
Windows Server 2008
Windows XP
Category D1 Operating Required for Category D1 models if Operating System Name is Other. O N Text Max Length: System Name Other 1000
Category D1 Processor Brand
Category D1 Processor Name
Required for Category D1 models. For Product Type Slate/Tablet, Processor Brand will not be included on certified product list.
Required for Category D1 models. For Product Type Slate/Tablet, Processor Name will not be included on certified product list.
O
O
N
Y
Enumeration Data
Enumeration Data
AMD
Intel
IBM
Sun
VIA
Other
Athlon
Athlon 64
Atom
Celeron
Core i3
Core i5
Core i7
Core2 Duo
Core2 Quad
Core M
FX
Geode
Itanium
Itanium 2
Nano
Neo
Opteron
Other
Pentium
Pentium D
Pentium IV
Category D1 Processor Required for Category D1 models if Category D1 Processor Name is Other. For O N Text Name Other Product Type Slate/Tablet, Processor Name Other will not be included on certified
product list.
Category D1 Multi- Required for Category D1 models. Report yes if installed processor supports four O N Enumeration Channel Memory or more memory channels. Data Support
Category D1 Installed Required for Category D1 models. Provide the memory actually installed in the O N Decimal System Memory RAM model tested, not the maximum supported. (GB)
Category D1 Graphics Required for Category D1 models. O N Enumeration Category Data
Category D1 Switchable Not applicable for Category D1 models. O N Enumeration Graphics Enabled by Data Default in Ac Mode
Category D1 Capable of Not applicable for Category D1 models. O N Enumeration Switchable Graphics in Data Battery Mode
Category D1 Primary Required for Category D1 models. O N Decimal
Phenom X3
Phenom X4
Ryzen 3
Ryzen 5
Ryzen 7
Xeon
Max Length: 1000
Yes
No
No. of Decimal: 1 Min Value: 0.0
G1
G2
G3
G4
G5
G6
G7
Yes
No
Yes
No
No. of
Discrete Graphics Frame Buffer Bandwidth (GB/s)
Category D1 Primary Required for Category D1 models. O N Integer Discrete Graphics Frame Buffer Data Width (bits)
Category D1 Secondary Required for Category D1 models when a device has a secondary discrete O N Decimal Discrete Graphics Frame graphics device installed. Buffer Bandwidth (GB/s)
Category D1 Secondary Required for Category D1 models when a device has a secondary discrete O N Integer Discrete Graphics Frame graphics device installed. Buffer Data Width (bits)
Category D1 Gigabit Required for Category D1 models. O N Integer Ethernet Ports (count)
Category D1 Energy Required for Category D1 models. Indicate if Energy Efficient Ethernet is O N Enumeration Efficient Ethernet (EEE) supported. Data
Category D1 Number of Required for Category D1 models. O N Integer Storage Drives
Category D1 Number of Required for Category D1 if integrated display allowance is applicable. O N Integer Integrated Displays (count)
Category D1 Integrated Required for Category D1 if integrated display allowance is applicable. If multiple O N Decimal Display Resolution integrated displays, provide average. (megapixels)
Category D1 Integrated Required for Category D1 if integrated display allowance is applicable. If multiple O N Decimal Display Viewable Screen integrated displays, provide average. Area (sq in)
Category D1 Enhanced Required if for Category D1 Enhanced-performance Display allowance is O N Enumeration Performance Display applicable. Data Present
Category D1 Enhanced Required if for Category D1 Enhanced-performance Display allowance is O N Decimal Perform Disp Diagonal applicable. If multiple integrated displays, provide average. Vble Screen Size (in)
Decimal: 1
No. of Decimal: 1
Min Value: 0
Yes
No
Min Value: 0
No. of Decimal: 2 Min Value: 0.00
No. of Decimal: 2 Min Value: 0.00
Yes
No
No. of Decimal: 2 Min Value: 0.00
Category D1 Internal/External Pwr Supply Efficiency at 10% Load
Required if for Category D1 Power Supply Efficiency allowance is included in test report.
O N Decimal No. of Decimal: 2 Min Value: 0.00 Max Value: 1.00
Category D1 Internal Power Supply Efficiency at 20% Load
Required if for Category D1 internal power supply is present. O N Decimal No. of Decimal: 2 Min Value: 0.00 Max Value: 1.00
Category D1 Internal Power Supply Efficiency at 50% Load
Required if for Category D1 internal power supply is present. O N Decimal No. of Decimal: 2 Min Value: 0.00 Max Value: 1.00
Category D1 Internal Power Supply Efficiency at 100% Load
Required if for Category D1 internal power supply is present. O N Decimal No. of Decimal: 2 Min Value: 0.00 Max Value: 1.00
Category D1 External Power Supply Average Efficiency
Required if for Category D1 Power Supply Efficiency allowance is applicable. Provide the simple average of efficiency at 25%, 50%, 75%, and 100% load.
O N Decimal No. of Decimal: 2 Min Value: 0.00 Max Value: 1.00
Category D1 External/Internal Power Supply Rated Power (W)
Required for Category D1 models. Provide the nameplate output power which is the power output of the power supply as specified on the manufacturer's label on the power supply housing or, if absent from the housing, as specified in documentation provided by the manufacturer.
O N Decimal No. of Decimal: 1 Min Value: 0
Category D1 Physical CPU Cores (count)
Required for Category D1 models. Provide the number of physical - not logical -CPU cores. For Product Type Slate/Tablet, Physical CPU Cores will not be included on certified product list.
O N Integer Min Value: 0
Category D1 CPU Packages (count)
Required for Category D1 models. Provide the number of CPUs/packages. For Product Type Slate/Tablet, CPU Packages will not be included on certified product list.
O N Integer Min Value: 0
Category D1 CPU Base Required for Category D1 models. Provide the base CPU clock speed, not the O N Decimal No. of
Clock Speed (GHz)
Category D1 CPU Maximum Clock Speed (GHz)
Category D1 Storage Technology
Category D1 Storage Technology Other
Category D1 Performance Score
Category D1 Proxy Support
Category D1 Measured Power in Off at 115 V (W)
Category D1 Measured Power in Off at 230 V (W)
Category D1 User-activated Low-power Mode Enabled by Default
burst, turbo, maximum, temporary, or intermittent clock speed. For Product Type Slate/Tablet, CPU Base Clock Speed will not be included on certified product list.
Required for Category D1 models. Provide the burst, turbo, maximum, temporary, or intermittent clock speed. For Product Type Slate/Tablet, CPU Maximum Clock Speed will not be included on certified product list.
Required for Category D1 models. Provide the storage technology. Hard Disk Drive includes hybrid hard disk drives with flash component.
Required if Category D1 Storage Technology is Other.
Required for Category D1 models. Performance Score is the product of Category D1 Physical CPU Cores and Category D1 CPU Clock Speed in GHz.
Required for Category D1 models. This is a manufacturer-reported parameter. On Mac computers, “Wake for network access” enabled within the Energy Saver/Power Adapter Preferences signifies Base Capability or better. On Windows computers, “ARP Offload” or “NS Offload” or similar enabled within the Advanced Properties of the Network Interface Card (accessed through the Device Manager) signifies Base Capability or better. OEM can provide further guidance on how to confirm Proxy Support.
Required for Category D1 models tested at 115 V.
Required for Category D1 models tested at 230 V.
Required for Category D1 models. Indicate if model offers Sleep Mode enabled by default or another low-latency user-activated mode or state that preserves machine state.
O
O
O
O
O
O
O
O
N Decimal
Y Enumeration Data
N Text
N Decimal
N Enumeration Data
N Decimal
N Decimal
N Enumeration Data
Decimal: 1 Min Value: 0.0
No. of Decimal: 1 Min Value: 0.0
Hard Disk Drive
Solid State Drive
Other
Max Length: 1000
No. of Decimal: 1 Min Value: 0.0
Conventional
Base Capability
Remote Wake
Service Discovery/ Name Services
Full Capability
No. of Decimal: 1 Min Value: 0.0
No. of Decimal: 1
Off Mode with Hibernation
Sleep Mode
Category D1 User- Required if Category D1 User-activated Low-power Mode Enabled by Default is O N Text activated Low-power Other. Mode Enabled by Dflt Other
Category D1 Long Idle Required for Category D1 models. Indicate if Long Idle State power is used in O N Enumeration State Pwr Used in Place place of Sleep Mode power when calculating Typical Energy Consumption (TEC). Data of Sleep Mode Pwr
Category D1 Measured Required for Category D1 models tested at 115 V if model has User-activated O N Decimal Power in Sleep at 115 V Low-power Mode Enabled by Default. Report power in the User-activated Low-(W) power Mode Enabled by Default, if applicable.
Category D1 Measured Required for Category D1 models tested at 230 V if model has User-activated O N Decimal Power in Sleep at 230 V Low-power Behavior Enabled by Default. Report power in the User-activated (W) Low-power Mode Enabled by Default, if applicable.
Category D1 Measured Required for Category D1 models tested at 115 V. O N Decimal Power in Long Idle at 115 V (W)
Category D1 Measured Required for Category D1 models tested at 230 V. O N Decimal Power in Long Idle at 230 V (W)
Category D1 Measured Required for Category D1 models tested at 115 V. O N Decimal Power in Short Idle at 115 V (W)
Category D1 Additional Required if Product Type is Notebook or Two-In-One Notebook for Category D1 O N Decimal Measured Power in models tested at 115 V. The display brightness for this additional measurement Short Idle at 115 V (W) shall be 150cd/m sq.
Category D1 Measured Required for Category D1 models tested at 230 V. O N Decimal Power in Short Idle at 230 V (W)
Category D1 Additional Required if Product Type is Notebook or Two-In-One Notebook for Category D1 O N Decimal Measured Power in models tested at 230 V. The display brightness for this additional measurement Short Idle at 230 V (W) shall be 150cd/m sq.
Connected Sleep
Other
None
Max Length: 1000
Yes
No
No. of Decimal: 1
No. of Decimal: 1
No. of Decimal: 1
No. of Decimal: 1
No. of Decimal: 1
No. of Decimal: 1 Min Value: 0
No. of Decimal: 1
No. of Decimal: 1 Min Value: 0
Reported Category D1 Required for Category D1 models tested at 115 V. Provide the Typical Energy O N TEC at 115 V (kWh) Consumption (TEC) which will appear on the ENERGY STAR list of certified
products.
Reported Category D1 Required for Category D1 models tested at 230 V. O N TEC at 230 V (kWh)
Category D1 Base TEC Required for Category D1 models. O N Allowance
Category D1 Functional Required for Category D1 models. If no capability adjustments, indicate zero. O N Adder Allowances (kWh)
Category D1 Maximum Required for Category D1 models. If no functional adders, indicate Base TEC O N TEC Requirement (Etec Allowance. max) (kWh)
Category D2 Operating Required for Category D2 models. O Y System Name
Decimal
Decimal
Integer
Decimal
Decimal
Enumeration Data
No. of Decimal: 1
No. of Decimal: 1
Min Value: 14 Max Value: 135
No. of Decimal: 1
No. of Decimal: 1
Android
Chrome
iOS
Linux
Mac OS X
Mac OS X Server
Other
Solaris 10
Solaris 9
Unix
Windows 2000
Windows 7
Windows 8
Windows 10
Windows CE
Windows Home Server
Windows Server 2008
Windows XP
Category D2 Operating Required for Category D2 models if Operating System Name is Other. O N Text System Name Other
Category D2 Processor Required for Category D2 models. For Product Type Slate/Tablet, Processor O N Enumeration Brand Brand will not be included on certified product list. Data
Category D2 Processor Required for Category D2 models. For Product Type Slate/Tablet, Processor O Y Enumeration Name Name will not be included on certified product list. Data
Max Length: 1000
AMD
Intel
IBM
Sun
VIA
Other
Athlon
Athlon 64
Atom
Celeron
Core i3
Core i5
Core i7
Core2 Duo
Core2 Quad
Core M
FX
Geode
Itanium
Itanium 2
Nano
Neo
Category D2 Processor Required for Category D2 models if Category D2 Processor Name is Other. For O N Text Name Other Product Type Slate/Tablet, Processor Name Other will not be included on certified
product list.
Category D2 Multi- Required for Category D2 models. Report yes if installed processor supports four O N Enumeration Channel Memory or more memory channels. Data Support
Category D2 Installed Required for Category D2 models. Provide the memory actually installed in the O N Decimal System Memory RAM model tested, not the maximum supported. (GB)
Category D2 Graphics Required for Category D2 models. O N Enumeration Category Data
Opteron
Other
Pentium
Pentium D
Pentium IV
Phenom X3
Phenom X4
Ryzen 3
Ryzen 5
Ryzen 7
Xeon
Max Length: 1000
Yes
No
No. of Decimal: 1 Min Value: 0.0
G1
G2
G3
G4
G5
G6
G7
Category D2 Switchable Graphics Enabled by Default in Ac Mode
Category D2 Capable of Switchable Graphics in Battery Mode
Category D2 Discrete Graphics Frame Buffer Bandwidth (GB/s)
Category D2 Discrete Graphics Frame Buffer Data Width (bits)
Category D2 Secondary Discrete Graphics Frame Buffer Bandwidth (GB/s)
Category D2 Secondary Discrete Graphics Frame Buffer Data Width (bits)
Category D2 Gigabit Ethernet Ports (count)
Category D2 Energy Efficient Ethernet (EEE)
Category D2 Number of Storage Drives
Category D2 Number of Integrated Displays (count)
Category D2 Integrated Display Resolution (megapixels)
Category D2 Integrated Display Viewable Screen Area (sq in)
Not applicable for Category D2 models. O N Enumeration Data
Not applicable for Category D2 models. O N Enumeration Data
Required for Category D2 models. O N Decimal
Required for Category D2 models. O N Integer
Required for Category D2 models when a device has a secondary discrete graphics device installed.
O N Decimal
Required for Category D2 models when a device has a secondary discrete graphics device installed.
O N Integer
Required for Category D2 models. O N Integer
Required for Category D2 models. Indicate if Energy Efficient Ethernet is supported.
O N Enumeration Data
Required for Category D2 models. O N Integer
Required for Category D2 if integrated display allowance is applicable. O N Integer
Required for Category D2 if integrated display allowance is applicable. If multiple integrated displays, provide average.
O N Decimal
Required for Category D2 if integrated display allowance is applicable. If multiple integrated displays, provide average.
O N Decimal
Yes
No
Yes
No
No. of Decimal: 1
No. of Decimal: 1
Min Value: 0
Yes
No
Min Value: 0
No. of Decimal: 2 Min Value: 0.00
No. of Decimal: 2 Min Value: 0.00
Category D2 Enhanced Required if for Category D2 Enhanced-performance Display allowance is O N Enumeration Performance Display applicable. Data Present
Category D2 Enhanced Required if for Category D2 Enhanced-performance Display allowance is O N Decimal Perform Disp Diagonal applicable. If multiple integrated displays, provide average. Vble Screen Size (in)
Category D2 Required if for Category D2 Power Supply Efficiency allowance is included in test O N Decimal Internal/External Pwr report. Supply Efficiency at 10% Load
Category D2 Internal Required if for Category D2 internal power supply is present. O N Decimal Power Supply Efficiency at 20% Load
Category D2 Internal Required if for Category D2 internal power supply is present. O N Decimal Power Supply Efficiency at 50% Load
Category D2 Internal Required if for Category D2 internal power supply is present. O N Decimal Power Supply Efficiency at 100% Load
Category D2 External Required if for Category D2 Power Supply Efficiency allowance is applicable. O N Decimal Power Supply Average Provide the simple average of efficiency at 25%, 50%, 75%, and 100% load. Efficiency
Category D2 Required for Category D2 models. Provide the nameplate output power which is O N Decimal External/Internal Power the power output of the power supply as specified on the manufacturer's label on Supply Rated Power (W) the power supply housing or, if absent from the housing, as specified in
documentation provided by the manufacturer.
Yes
No
No. of Decimal: 2 Min Value: 0.00
No. of Decimal: 2 Min Value: 0.00 Max Value: 1.00
No. of Decimal: 2 Min Value: 0.00 Max Value: 1.00
No. of Decimal: 2 Min Value: 0.00 Max Value: 1.00
No. of Decimal: 2 Min Value: 0.00 Max Value: 1.00
No. of Decimal: 2 Min Value: 0.00 Max Value: 1.00
No. of Decimal: 1 Min Value: 0
Category D2 Physical CPU Cores (count)
Category D2 CPU Packages (count)
Category D2 CPU Base Clock Speed (GHz)
Category D2 CPU Maximum Clock Speed (GHz)
Category D2 Storage Technology
Category D2 Storage Technology Other
Category D2 Performance Score
Category D2 Proxy Support
Category D2 Measured Power in Off at 115 V (W)
Required for Category D2 models. Provide the number of physical - not logical -CPU cores. For Product Type Slate/Tablet, Physical CPU Cores will not be included on certified product list.
Required for Category D2 models. Provide the number of CPUs/packages. For Product Type Slate/Tablet, CPU Packages will not be included on certified product list.
Required for Category D2 models. Provide the base CPU clock speed, not the burst, turbo, maximum, temporary, or intermittent clock speed. For Product Type Slate/Tablet, CPU Base Clock Speed will not be included on certified product list.
Required for Category D2 models. Provide the burst, turbo, maximum, temporary, or intermittent clock speed. For Product Type Slate/Tablet, CPU Maximum Clock Speed will not be included on certified product list.
Required for Category D2 models. Provide the storage technology. Hard Disk Drive includes hybrid hard disk drives with flash component.
Required if Category D2 Storage Technology is Other.
Required for Category D2 models. Performance Score is the product of Category D2 Physical CPU Cores and Category D2 CPU Clock Speed in GHz.
Required for Category D2 models. This is a manufacturer-reported parameter. On Mac computers, “Wake for network access” enabled within the Energy Saver/Power Adapter Preferences signifies Base Capability or better. On Windows computers, “ARP Offload” or “NS Offload” or similar enabled within the Advanced Properties of the Network Interface Card (accessed through the Device Manager) signifies Base Capability or better. OEM can provide further guidance on how to confirm Proxy Support.
Required for Category D2 models tested at 115 V.
O
O
O
O
O
O
O
O
O
N
N
N
N
Y
N
N
N
N
Integer
Integer
Decimal
Decimal
Enumeration Data
Text
Decimal
Enumeration Data
Decimal
Min Value: 0
Min Value: 0
No. of Decimal: 1 Min Value: 0.0
No. of Decimal: 1 Min Value: 0.0
Hard Disk Drive
Solid State Drive
Other
Max Length: 1000
No. of Decimal: 1 Min Value: 0.0
Conventional
Base Capability
Remote Wake
Service Discovery/ Name Services
Full Capability
No. of Decimal: 1 Min Value: 0.0
Category D2 Measured Power in Off at 230 V (W)
Category D2 User-activated Low-power Mode Enabled by Default
Category D2 User- Required if Category D2 User-activated Low-power Mode Enabled by Default is activated Low-power Other. Mode Enabled by Dflt Other
Category D2 Long Idle Required for Category D2 models. Indicate if Long Idle State power is used in State Pwr Used in Place place of Sleep Mode power when calculating Typical Energy Consumption (TEC). of Sleep Mode Pwr
Category D2 Measured Required for Category D2 models tested at 115 V if model has User-activated Power in Sleep at 115 V Low-power Mode Enabled by Default. Report power in the User-activated Low-(W) power Mode Enabled by Default, if applicable.
Category D2 Measured Required for Category D2 models tested at 230 V if model has User-activated Power in Sleep at 230 V Low-power Behavior Enabled by Default. Report power in the User-activated (W) Low-power Mode Enabled by Default, if applicable.
Category D2 Measured Required for Category D2 models tested at 115 V. Power in Long Idle at 115 V (W)
Category D2 Measured Required for Category D2 models tested at 230 V. Power in Long Idle at 230 V (W)
Category D2 Measured Required for Category D2 models tested at 115 V. Power in Short Idle at 115 V (W)
Category D2 Additional Required if Product Type is Notebook or Two-In-One Notebook for Category D2 Measured Power in models tested at 115 V. The display brightness for this additional measurement Short Idle at 115 V (W) shall be 150cd/m sq.
Required for Category D2 models tested at 230 V.
Required for Category D2 models. Indicate if model offers Sleep Mode enabled by default or another low-latency user-activated mode or state that preserves machine state.
O
O
O
O
O
O
O
O
O
O
N
N
N
N
N
N
N
N
N
N
Decimal
Enumeration Data
Text
Enumeration Data
Decimal
Decimal
Decimal
Decimal
Decimal
Decimal
No. of Decimal: 1
Off Mode with Hibernation
Sleep Mode
Connected Sleep
Other
None
Max Length: 1000
Yes
No
No. of Decimal: 1
No. of Decimal: 1
No. of Decimal: 1
No. of Decimal: 1
No. of Decimal: 1
No. of Decimal: 1
Category D2 Measured Power in Short Idle at 230 V (W)
Required for Category D2 models tested at 230 V. O N Decimal No. of Decimal: 1
Category D2 Additional Measured Power in Short Idle at 230 V (W)
Required if Product Type is Notebook or Two-In-One Notebook for Category D2 models tested at 230 V. The display brightness for this additional measurement shall be 150cd/m sq.
O N Decimal No. of Decimal: 1 Min Value: 0
Reported Category D2 TEC at 115 V (kWh)
Required for Category D2 models tested at 115 V. Provide the Typical Energy Consumption (TEC) which will appear on the ENERGY STAR list of certified products.
O N Decimal No. of Decimal: 1
Reported Category D2 TEC at 230 V (kWh)
Required for Category D2 models tested at 230 V. O N Decimal No. of Decimal: 1
Category D2 Base TEC Allowance
Required for Category D2 models. O N Integer Min Value: 14 Max Value: 135
Category D2 Functional Adder Allowances (kWh)
Required for Category D2 models. If no capability adjustments, indicate zero. O N Decimal No. of Decimal: 1
Category D2 Maximum TEC Requirement (Etec max) (kWh)
Required for Category D2 models. If no functional adders, indicate Base TEC Allowance.
O N Decimal No. of Decimal: 1