DESIGNS BY J. DE BRUYN - Microsoft...2 J De Bruyn’s expertise in tile and precision design cutting has been long established. We primarily cut our designs and tiles from Forbo Marmoleum

1

DESIGNS BYJ. DE BRUYN

(FLOORING SERVICES) LTD

Bespoke

2

J De Bruyn’s expertise in tile and precision design cutting has been long established. We primarily cut our designs and tiles from Forbo Marmoleum sheet but we can cut from other types of material. Marmoleum is made from 97% natural raw materials, 72% is rapidly renewable and has 43% recycled content. It is warm underfoot, is Allergy UK approved, is anti-bacterial due to its Top Shield 2 protective layer, and you can pick from over 300 colours for a truly bespoke design floor.

Our design work is a skilled process and carried out by our long serving design team. All material used goes through a minimum 3 day preparation process to enable us to cut your order to our high standards. Each design is cut using precision tooling into individual pieces, which are then hand assembled by our team into panels, ready for an easier installation process. In this brochure we have highlighted a selection of our designs, but more can be found on our website, www.de-bruyn.co.uk

For our basic tile cutting service we offer tiles ranging from 50mm up to 900mm in size. We also cut design strips ranging from 5mm to 300mm in width, which are cut to nominal 1 metre lengths. Lastly, we offer a corner clipping tile service to accommodate key squares ranging from 20mm up to 120mm. We can perform this service on tiles cut from Marmoleum sheet, pre packed Modular tiles, or other manufactured tiles.For any other tile or design requirements please contact us and we will try and accommodate your needs.

Yours,

J. De-Bruyn (Flooring Services) Ltd.

INTRODUCTION

3

The tiles and designs listed are manufactured and distributed by J DeBruyn Limited. They are cut from Marmoleum Marbleds and Solids 2.5mmsheet Linoleum.Please note these tiles should be installed within 10 days maximum, asthey are not dimensionally stable until they are fitted.These tiles and designs can be cut from other Forbo Linoleums and Vinylsat an extra cost.(Excluding Safety Flooring)

Standard Size Tiles50 mm 300 mm70 mm 333 mm100 mm 450 mm120mm 500 mm150 mm 610 mm200 mm 900 mm229 mm

Rectangles225mm x 75mm450mm x 145mm610mm x 200mm

TILES & DESIGNS

4

RD101 � 50mm � 200MM PANELS

RD101- 50mm – 200MM PER PANEL – 25 PANELS PER M2 A = 50MM KEY – 25 KEYS PER M2B = 150MM X 50MM STRIP – 50 STRIPS PER M2C = 50MM KEY – 100 KEYS PER M2D = 50MM X 35MM TRIANGLE – 200 TRIANGLES PER M2

E = 50MM X 35MM TRIANGLE – 100 TRIANGLES PER M2F = 50MM X 35MM TRIANGLE – 100 TRIANGLES PER M2 G = 50MM KEY – 25 KEYS PER M2

5

RD102 � 150MM PANELS

RD102 – 150MM PER PANEL – 44 PANELS PER M2A = 150MM PLAIN TILE = 22 TILES PER M2B = 50MM KEY = 88 KEYS PER M2C = 50MM X 35MM TRIANGLE = 176 TRIANGLES PER M2D= 50MM X 35MM TRIANGLE = 88 TRIANGLES PER M2

E = 50MM X 35MM TRIANGLE = 88 TRIANGLES PER M2F = 50MM KEY = 22 KEYS PER M2.

6

RD107 � 210MM PANEL

RD107 – 210MM PANEL – 23 PANELS IN TOTAL – 11.5 OF EACH DESIGNA = 100MM X 70MM TRIANGLE = 184 TRIANGLES PER M2B = 100MM X 70MM TRIANGLE = 92 TRIANGLES PER M2C = 100MM X 70MM TRIANGLE = 44 TRIANGLES PER M2C = 70MM KEY = 12 KEYS PER M2

D = 100MM X 70MM TRIANGLE = 44 TRIANGLES PER M2D = 70MM KEY = 12 KEYS PER M2

7

RD108 � 36 PIECESPER COLOUR, PER M2

RD108 – 36 PIECES, PER COLOUR, PER M2 (167MM EDGE TO EDGE)A = 36 PIECES PER M2B = 36 PIECES PER M2C = 36 PIECES PER M2

8

RD109 � 150MM PER PANEL

RD109 – 150MM PER PANEL – 45 PANELS PER M2A = 50MM KEYS = 45 KEYS PER M2

B = 100MM X 50MM = 90 STRIPS PER M2C = 100MM TILES = 45 TILES PER M2

9


RD110 – 200MM PER PANEL – 25 PANELS PER M2 A = 150MM X 50MM STRIPS = 50 PER M2

B = 50MM KEYS = 25 KEYS PER M2C = 150MM TILES = 25 TILES PER M2D = 50MM KEYS = 25 KEYS PER M2

10

RD111 � 50mm � 150MM PER PANEL*

RD111 - 50mm – 150MM PER PANEL – 44 PANELS PER M2 A = 150MM TILES = 22 TILES PER M2B = 50MM KEYS = 22 KEYS PER M2C = 50MM KEYS = 88 KEYS PER M2D = 50MM X 35MM TRIANGLES = 176 TRIANGLES PER M2

E = 50MM X 35MM TRIANGLES = 88 TRIANGLES PER M2F = 50MM X 35MM TRIANGLES = 88 TRIANGLES PER M2G = 50MM KEYS = 22 KEYS PER M2

* AVAILABLE IN BIGGER SIZE (RD111-70MM)

11


RD112 – 200MM PER PANEL – 25 PANELS PER M2A1 = 50MM KEYS = 100 KEYS PER M2B1 = 150MM TILES = 25 TILES PER M2

A = 50MM X 35MM TRIANGLES = 200 TRIANGLES PER M2B = 50MM X 35MM = 200 TRIANGLES PER M2

12


RD113 – 150MM PER PANELS – 45 PANELS PER M2 – 22.5 OF EACH DESIGNA = 50MM KEYS = 45 KEYS PER M2

B = 70MM X 50MM TRIANGLES = 180 TRIANGLES PER M2C = 100MM X 70MM TRIANGLES = 90 TRIANGLES PER M2

D = 100MM TILES = 22.5 TILES PER M2E = 100MM TILES = 22.5 TILES PER M2

13


RD114 – 220MM PER PANEL – 21 PANELS PER M2A = 150MM X 70MM MITRED STRIP = 42 STRIPS PER M2B = 150MM TILE = 21 TILES PER M2C = 50MM X 35MM TRIANGLE = 168 TRIANGLES PER M2D = 50MM X 35MM TRIANGLE = 84 TRIANGLES PER M2

E = 50MM KEY = 21 KEYS PER M2F = 50MM X 35MM TRIANGLE = 84 TRIANGLES PER M2

14


RD115 – 350MM PER PANEL – 8 PANELS PER M2A = 200MM X 50MM STRIP = 16 STRIPS PER M2A1 = 50MM KEY = 32 KEYS PER M2B = 50MM KEY = 8 KEYS PER M2B1 = 70MM X 50MM TRIANGLE = 64 TRIANGLESC = 50MM X 35MM TRIANGLE = 32 TRIANGLESC1 = 70MM KEY = 8 KEYSD = 50MM X 35MM TRIANGLE = 64 TRIANGLES

E = 50MM X 35MM TRIANGLE = 32 TRIANGLESF = 50MM KEY = 64 KEYSF1 = 70MM X 50MM TRIANGLE = 64 TRIANGLESG = 70MM KEY = 32 KEYSG1 = 50MM KEY = 32 KEYSH = 70MM X 50MM TRIANGLE = 32 TRIANGLES

15


RD116 – 200MM PER PANEL – 25 PANELS PER M2 – 12.5 PER EACH DESIGN PANELA = 50MM KEY = 52 KEYS PER M2B = 100MM X 70MM TRIANGLE = 52 TRIANGLES PER M2C = 70MM X 50MM TRIANGLE = 104 TRIANGLES PER M2D = 70MM X 50MM TRIANGLE = 52 TRIANGLES PER M2E = 50MM X 35MM TRIANGLE = 52 TRIANGLES PER M2

F = 50MM KEY = 13 KEYS PER M2G = 140MM X 100MM TRIANGLE = 52 TRIANGLES PER M2H = 100MM X 70MM TRIANGLE = 52 TRIANGLES PER M2I = 100MM TILE = 13 TILES PER M2

16


RD117 – 200MM PER PANEL – 25 PANELS PER M2A = 70MM X 50MM TRIANGLE = 200 TRIANGLES PER M2B = 70MM X 50MM TRIANGLE = 300 TRIANGLES PER M2

A1 = 70MM KEY = 50 KEYS PER M2B2 = 70MM KEY = 25 KEYS PER M2

17


RD118 – 210MM PANEL – 23 PANELS PER M2A = 100MM X 70MM TRIANGLE = 92 TRIANGLES PER M2

B = 100MM X 70MM TRIANGLE = 184 TRIANGLES PER M2A1 = 70MM KEY = 23 KEYS PER M2

A2 = 100MM TILE = 23 TILES PER M2

18


RD119 – 200MM PER PANEL – 25 PANELS PER M2A = 100MM X 70MM TRIANGLE = 200 TRIANGLES PER M2B = 100MM X 70MM TRIANGLE = 200 TRIANGLES PER M2

19


RD120 – 200MM PANEL – 25 PANELS PER M2A = 100MM TILE = 50 TILES PER M2

B = 70MM X 50MM TRIANGLE = 200 TRIANGLES PER M2C = 70MM KEY = 50 KEYS PER M2

20


RD121 – 210MM PANEL – 23 PANELS PER M2A = 70MM KEY = 23 KEYS PER M2B = 140MM X 70MM STRIP = 46 STRIPSC = 100MM X 70MM TRIANGLE = 92 TRIANGLESD = 70MM X 50MM TRIANGLE = 92 TRIANGLES

E = 50MM X 35MM TRIANGLE = 92 TRIANGLESF = 50MM KEY = 23 KEYS

21


RD122 – 275MM PANEL – 13 PANELS PER M2A = 75MM KEY = 13 KEYSB = 25MM X 200MM STRIP = 52 STRIPSC = 25MM X 200MM STRIP = 26 STRIPSC1 = 100MM X 70MM TRIANGLE = 92 TRIANGLES

D = 50MM KEY = 92 KEYSE = 70MM X 50MM TRIANGLE = 184 TRIANGLESF = 50MM X 35MM TRIANGLE = 92 TRIANGLESG = 50MM KEY = 23 KEYS

22


RD123 – 250MM PANEL – 16 PANELS PER M2A = 50MM KEY = 16 KEYS PER M2B = 50MM X 35MM TRIANGLE = 64 TRIANGLES PER M2C = 50MM X 35MM TRIANGLE = 128 TRIANGLES PER M2D = 50MM X 35MM TRIANGLE = 64 TRIANGLES PER M2E = 100MM X 50MM STRIP = 32 STRIPS PER M2

F = 70MM X 50MM TRIANGLE = 64 TRIANGLES PER M2G = 200MM TILE C/C @ 70MM = 16 TILES PER M2H = 70/50MM KEY (DEPENDING ON SELECTION) = 16 KEYS PER M2I = 50MM X 35MM TRIANGLE = 64 TRIANGLES PER M2** IF 70MM KEY REQUIRED PUT “I” AS THE SAME COLOUR AS “H”**

23

RD124 � HEXAGONS

RD124 – HEXAGONS – 24 ELEMENTS PER M2A = 8 PIECES PER M2B = 8 PIECES PER M2C = 8 PIECES PER M2

24

RD125 � 150MM TILE C/C @ 70MM WITH DESIGN 70MM KEY

RD125 – 150MM TILE C/C @ 70MM WITH DESIGN 70MM KEY – 45 TILES AND KEYS PER M2A = 150MM TILE = 22.5 TILES PER M2B = 150MM TILE = 22.5 TILES PER M2

C = 50MM KEY = 45 KEYS PER M2D= 50MM X 35MM TRIANGLE = 180 TRIANGLES

25

RD101 � 70mm � 280MM PANEL

RD101 -70mm – 280MM PANEL – 13 PANELS PER M2A = 70MM KEY – 13 KEYS PER M2B = 210MM X 70MM STRIP – 26 STRIPS PER M2C = 70MM KEY – 52 KEYS PER M2D = 70MM X 50MM TRIANGLE – 104 TRIANGLES PER M2

E = 70MM X 50MM TRIANGLE – 52 TRIANGLES PER M2F = 70MM X 50MM TRIANGLE – 52 TRIANGLES PER M2G = 70MM KEY – 70 KEYS PER M2

26

BORDERS

RDB201 – Dimensions 1000mm x 60mm




RDB205 – Dimensions 1010mm x 93mm (corner piece available)


27

BORDERS




RDB210 – Dimensions 1000mm x 100mm (corner piece available)


28

Photos by:Unique Imagingw: www.uniqueimaging.co.uke: [email protected]

Please contact us for your local supplier and installer

tel:020 8558 4725fax: 020 8539 7050

e-mail: [email protected]

Documents

DESIGNS BY J. DE BRUYN - Microsoft...2 J De Bruyn’s expertise in tile and precision design cutting has been long established. We primarily cut our designs and tiles from Forbo Marmoleum