Designed for extreme indoor and outdoor locations!

ENCLOSURE RATINGS *Type: 4X - 304 or 316 Stainless *Type: 4 - 304 or 316 Stainless *Type: 3R - 304 or 316 Stainless *Type: 3 - 304 or 316 Stainless *IP66 & IP69 Rated - Certified by UL

ENCLOSURE OPTIONS: *Lighting *Ventilation Air Conditioning Fans Heating *Lasered holes & Cut Outs *Lifting lugs (welded) *Hanging brackets *3A Dairy Finish *Dead Front Door *Interlocked Doors

ENCLOSURE INDUSTRIES: *Industrial *Pharmaceutical *Food & Dairy *Outdoor

Designed for extreme indoor and outdoor locations!

CUSTOM STAINLESS ENCLOSURES, INC -- BUILDING YOUR ENCLOSURES YOUR WAY --

Sales: 651.500.3650 .:. Email: [email protected] .:. Web: 4Xxtreme.com

Outer Seal

Inner Seal

DOUBLE SEAL ENCLOSURES™ U.S. PATENT # 9,745,794

UL LISTED TYPES: 4X, 4, 3R, 3, 1

Outer Seal increases the ability to withstand harsher environments.

Return Flange makes the door more rigid, requiring less quarter turns.

Field replaceable EPDM gasket system, rated continuous use at 200 °F.

Inner Seal is the only seal required for maintaining the Type 4X rating.

Pitched Outer Seal

Bullnose Slope Back

Slope Back

Slope Forward

Bullnose Slope Forward

Note: Flat Top Enclosures Are Available

Custom Stainless Enclosures, Inc. has developed a revolutionary Type: 4X, IP66 and IP69 Double Seal electrical enclosure for all industries. All of our enclosures surpass industry standards with our groundbreaking Double Seal Enclosure™ designed to withstand the harshest environments.

ULTRA CLEAN - FREE DRAINING DESIGN

DOUBLE STUD® MOUNTING SYSTEM U.S. PATENT # 10,077,794

AVAILABLE MOUNTING BRACKETS

“A“ dimension is stocked in 4 sizes 1 “, 2”, 4” and 10”.

Our goal when creating the Double Stud® was to supply our enclosures with an innovative mounting system that eliminates gaskets and reduces overall installation time.

DOUBLE STUD® DOUBLE STUD® Welded in place

Mounting Bracket

Hex Bolt

Flat Washers

Back Panel

Hex Nut

Front of bullnose extends past the front of door 1”.

1”

Underside of bullnose pitched up so liquid doesn’t flow back over the top of the door.

Top of door pitched for free draining. Pitched Outer seal.

Bottom of door pitched for free drainage.

“A”



Door gasket is pitched a minimum of ¼” per 12” on a 30”

wide door.

Free Draining Slots so water can’t build up between inner and outer seals.

1/4” PLATE

SANITARY

STANDARD

980 SERIES

970 SERIES

910 SERIES Gasketed Washer

Wall

O-Ring

3/8-16 X 1” bolt

Enclosure

“X”

Available bracket sizes: X = 1” Bracket X = 2” Bracket X = 4” Bracket X = 10” Bracket

Reduce your installation costs, by using our mounting systems on your next enclosure.

Need a special bracket for your installation? Give us a call!

4X - 60 30 12 - SS - BNSB - 17 - QT - FL - FM - TW - 3ADOUBLE SEAL

DOOR WIDTH

ENCLOSUREDEPTH

MATERIAL TYPE:SS= 304 STAINLESSSS(316) = 316 STAINLESS

TOP CONFIGURATION:SF = SLOPE FORWARDSB = SLOPE BACKBNSF = BULLNOSE SLOPE FORWARDBNSB = BULLNOSE SLOPE BACKFT = FLAT TOP

° PITCH

LATCH TYPEQT = QUARTER TURN 3PT = 3 POINT LATCH

FLANGED

FLOORMOUNT

TWINDOOR

PART# SYSTEM - SINGLE DOOR ENCLOSURES

NOTE: * ACTUAL DOOR HEIGHT IS 1/2" TALLER THAN PART# SIZE

** BACK PANEL PART # SYSTEM

X60P30-G - (57" x 27") GALVANIZED BACK PANEL

DOOR HEIGHT

DOOR WIDTH

MATERIAL TYPE: G - GALVANIZED - 12 GAUGEAL - ALUMINUM - 1/8"SS - STAINLESS 304 - 12 GAUGEW - POWDER COATED STEEL - 12 GAUGE

* * BACK PANEL PART NUMBER IS BASED UPON DOOR SIZE

GRIND & POLISHINSIDE CORNERS

4X - 72 90 24 - SS - SF - 17 - 3D - QT - FL - FM - TW - CS - 3ADOUBLE SEAL

*DOOR HEIGHT

ENCLOSURE WIDTH

DEPTH

MATERIAL TYPE:SS= 304 STAINLESSSS(316) = 316 STAINLESS

TOP CONFIGURATION:SF = SLOPE FORWARDSB = SLOPE BACKBNSF = BULLNOSE SLOPE FORWARDBNSB = BULLNOSE SLOPE BACKFT = FLAT TOP

° PITCH

LATCH TYPEQT = QUARTER TURN 3PT = 3 POINT LATCH

FLANGED

FLOORMOUNT

TWINDOOR

NOTE: * BACK PANEL PART NUMBER IS BASED UPON ENCLOSURE SIZE

# DOORS2 DOOR3 DOOR4 DOOR

CONSOLE

MULTI DOOR - BACK PANEL PART # SYSTEM

X72P90-G - (68" x 86") GALVANIZED BACK PANEL

*DOORHEIGHT

ENCLOSUREWIDTH

MATERIAL TYPE: G - GALVANIZED - 12 GAUGEAL - ALUMINUM - 1/8"SS - STAINLESS 304 - 12 GAUGEW - POWDER COATED STEEL - 12 GAUGE

PART# SYSTEM - MULTI DOOR ENCLOSURES

GRIND & POLISHINSIDE CORNERS

(SUBTRACT 4" FROM HEIGHT AND WIDTH)

*DOOR HEIGHT

* * BACK PANEL PART NUMBER IS BASED UPON DOOR SIZE & OVERALL ENCLOSUREWIDTH.

(SUBTRACT 3" FROM DOOR HEIGHT AND WIDTH)

CUSTOM STAINLESS ENCLOSURES, INC--BUILDING YOUR ENCLOSURE YOUR WAY--


4X-323229-SS-BNSB-7-TW-QT Bullnose Slope Back Twin Door Enclosure

4X-408718-SS-SF-10-3PT-FL-3D Slope Forward 3 Door

Mechanical Interlocked Doors Enclosure

4X-181825-SS-BNSF-05-TW-QT Bullnose Slope Forward

Twin Door Enclosure

4X-623224-SS-CO-QT Console 3 Door

4X-723618-SS-BNSB-10-3PT Bullnose Slope Back Enclosure

with Convivence and Key Exchange Unit Enclosures

4X-563612-SS-SF-07-2D-QT Slope Forward 2 Door Enclosure

With Center Barrier

4X-072704-SS-SB-07-QT Slope Back Push Button Enclosure



4X-HMI-ARM-SB-30-QT HMI Arm Enclosure

4X-723624-SS-BNSB-30-3PT-FM Bullnose Slope Back

Floor Mount Enclosure With External Disconnect Enclosure

4X-341812-SS-BNSB-30-3PT-FL

Documents

Designed for extreme indoor and outdoor locations!