6
Design Stage

Design stage grade 11 unit 2

  • Upload
    ism

  • View
    1.994

  • Download
    1

Embed Size (px)

DESCRIPTION

 

Citation preview

Page 1: Design stage grade 11 unit 2

Design Stage

Page 2: Design stage grade 11 unit 2

Here is the assessment criteria

Page 3: Design stage grade 11 unit 2

“A Range of feasible…”

• Should be at least 4 different designs.• Each should be suitable and usable if chosen

for the final product.

Page 4: Design stage grade 11 unit 2

“Each Evaluated…”

• You need to write down an evaluation of each design you do, checking it against the design specification to make sure it meets it.

• If it doesn’t meet it, the design can’t be considered ‘feasible’.

• You could copy your test table and use it here but bare in mind that some of the criteria might not yet be testable if they require a fully functioning website. Select the appropriate ones.

Page 5: Design stage grade 11 unit 2

“and evaluates it fully and critically”

• You need to choose one of your prototype designs and fully and critically evaluate it against the specification.

• This means that you need to write a more detailed report of exactly why you chose it, why it meets the specification better than the other designs and you can also be critical here and suggest some improvements to it, in order to make it fully meet the specification.

Page 6: Design stage grade 11 unit 2

What you need to have

For a Level 5/6:• At least 4 different prototype designs (in this

case 4 full radio scripts)• An evaluation of each design against the

design specification.• Identify your chosen design• Fully and critically evaluate this design against

the design specification.