DESIGN PROJECT

“ANTIQUE GLAMOUR”CHRISTMAS COLLAR

2 /10 WWW.CREATE-YOUR-STYLE.COM

SWAROVSKI ELEMENTS Supplies & Tools

Article Product Group Article No. Amount Size Color Color Code

Round Stones 1201 1 pc. 27 mm Aquamarine F 202

Round Stones 1201 1 pc. 27 mm Fuchsia F 502

Round Stones 1201 1 pc. 27 mm Light Colorado Topaz F 246

Round Stones 1201 1 pc. 35 mm Jet Hematite F 280 HEM

Fancy Stones 4196 1 pc. 30 x 26 Montana F 207

Beads 5328 100 pcs. 4 mm Denim Blue 266

Crystal Pearls 5810 22 pcs. 3 mm Crystal Petrol Pearl 001 600

Crystal Pearls 5810 46 pcs. 8 mm Crystal Petrol Pearl 001 600

Pendants 6128 21 pcs. 10 mm Crystal Copper 001 COP

Supplies

Chain, gold, 12 cmCrimping tube, gold, 8 cm27x Jump ring, gold, 5 mmLeather, gold, 6x30 cm1x Lobster clasp, goldNylon thread, transparent, 0.35 mm, 3 mRibbon, gold, 2 cm, 80 cmSewing thread, gold8x Split ring, gold, 5 mmTiger tail, gold, 0.30 mm, 1.2 m

Tools

Crimping pliers Double sided tapeFlat nose pliersGlueScissorsSewing needleSheet of paperSide cutter

Level of design: INTERMEDIATEHave also a look at the text instruction at the last page!

Sewing

CHRISTMAS COLLAR“ANTIQUE GLAMOUR” Stringing

STEP 1

5 cm

3 /10 WWW.CREATE-YOUR-STYLE.COM

Step 3

Repeat

1 m0.35 mm 1 m

3 mm

STEP 2

STEP 3

4 /10 WWW.CREATE-YOUR-STYLE.COM

Step 4STEP 4

STEP 5

50 cm0.35 mm

20 cm

1.5 cm 1.5 cm

1=x4 2

1/2

5 /10 WWW.CREATE-YOUR-STYLE.COM

Repeat step 5 - 6 x3

STEP 6

Repeat steps 5 - 6 x3

6 /10 WWW.CREATE-YOUR-STYLE.COM

Step 7

Repeat step x3

Repeat step x3

Repeat step x3

Glue

Glue

Step 8

5 cm

STEP 8

STEP 7

7 /10 WWW.CREATE-YOUR-STYLE.COM

Step 9

Step 10

Repeat step x20

STEP 9

STEP 10

8 /10 WWW.CREATE-YOUR-STYLE.COM

Step 11

Repeat step x1:

Repeat step 11 x1

1/2

3

x23

30 cm x4

1 2 3

STEP 11

Repeat step x1

9 /10 WWW.CREATE-YOUR-STYLE.COM

STEP 12

STEP 13

Repeat step 11 x1:Repeat step 11 x1

10 /10 WWW.CREATE-YOUR-STYLE.COM

STEP 1: Draw a 5 cm diameter circle or use the one in the illustrations. Stick double sided tape on the back.

STEP 2: Place the pattern on top of a piece of leather and cut out the circle.

STEP 3: Cut a 1m piece of 0.35 mm nylon thread. Start stitching from the back of the leather to the front 3 mm in from the edge. Stitch on the Swarovski Crystal Pearl article 5810 3 mm Crystal Petrol Pearl as shown in the illustrations.

STEP 4: Pull the nylon threads to get the shape seen in the illustrations. Remove the tape and fi t in the Swarovski Round Stone article 1201 35mm Jet Hematite. Tie a double knot with both thread ends. Stitch one thread end to the other side so that there is one thread on both of sides.

STEP 5: Cut a nylon thread 50 cm long. Stitch four back stitches on one end of the 20 cm long piece of ribbon leaving a

space of 1.5 cm at one end. Then stitch through to the other end leaving a 1.5 cm space at this end as well.

STEP 6: Stitch the ends together leaving the 1.5 cm space as done above. Fold the ribbon ends inward and sew them on to the ribbon as depicted in the illustrations. Repeat steps 5 and 6 three more times to make the other three ribbon pieces.

STEP 7: Use the pattern provided in the illustrations or cut a 5 cm leather circle on your own. Put this pattern on a leather piece and cut out four circular pieces of leather all together. Stick these leather pieces on the back side of each of the ribbon pieces.

STEP 8: Glue the Fancy Stone article 4196 30 x 26 mm Montana from the SWAROVSKI ELEMENTS assortment in the middle of one of the ribbon pieces. Repeat this step with the remaining Swarovski Round Stones article 1201.

STEP 9: Pin all ribbons together as shown and then stitch them together with sewing thread. Stitch the leather piece from step 4 as well as shown using the two loose ends of nylon thread.

STEP 10: Attach the jump ring along with a Swarovski Pendant article 6128 10 mm Crystal Copper to the ribbon as depicted in the illustration. Repeat this step 20 more times to attach all the other jump rings and SWAROVSKI ELEMENTS onto the ribbons.

STEP 11: Cut four 30 cm long pieces of tiger tail. Slide on 23 Swarovski Crystal Pearls art. 5810 3 mm Crystal Petrol

Pearls, one crimp tube and one split ring onto one piece of tiger tail. Slide the tiger tail back through the crimp tube. Pull it tight, crimp the crimping tube and cut off the extra tiger tail at this end. Repeat to crimp and fi x another split ring to the other end. Repeat this step one more time to get another string of Crystal Pearls.

STEP 12: Repeat step 11 once more to get two bead strands using Beads article 5328 4 mm Denim Blue from the SWAROVSKI ELEMENTS assortment.

STEP 13: Open a jump ring and slide it through the ribbon rosettes and Crystal Pearl and Bead strands on one end. On the other end of these strands attach an extension chain with one more jump ring. Similarly slide on another jump ring through the ribbon rosettes on the other side and attach the other set of Crystal Pearl and Bead strands. On the other end of this strand attach a lobster clasp with one jump ring as show in the illustrations.

CHRISTMAS COLLAR“ANTIQUE GLAMOUR”