Embed Size (px)
Citation preview
3651 WALNUT AVENUE, CHINO, CA 91710 • PHONE (909) 627-8178 • WEB DESCO.COM
For Immediate Release:
Desco Introduces New ESD Workstation Covers
Miami, FL (September 15, 2014) – Desco ESD Workstation Covers are designed to cover ESD sensitive products on a workstation. The covers protect products form ESD, dust, and other contaminants. They can be grounded with an available ground cord.
Surface resistance of the covers is 1 x 105 < 1 x 107 ohms RTT to attenuate electrostatic fields and electrostatic discharges (ESD).
Desco ESD Workstation Covers are made of polyester fabric with minimum 9% carbon conductive nylon fibers. Continuous and consistent charge dissipation is built in for the life of the covers. All four edges are bound.
An attached 10 mm (3/8”) snap allows the covers to be grounded to the workstation’s ground point.
Made in the USA.
41400 ESD Workstation Cover, 18” x 24”
41401 ESD Workstation Cover, 36” x 48”
41402 ESD Workstation Cover, 48” x 48”
Desco can create custom sizes or sublimate custom artwork to meet your company’s needs.
About Desco: Desco manufactures ESD control products used in the electronics production industry.Desco has six manufacturing locations in the USA. Products made by Desco include wrist straps, foot grounders, work surface mats, shielding bags, floor finish, floor mats, ionization, smocks, continuous monitors and ESD audit equipment. Desco products are available through distributors, resellers, and direct. A network of manufacturer representatives offers sales and technical support in most US states, Mexico, and Canada.
For additional information email [email protected] or visit Desco.com
Contact: Alyssa Smith781-821-8370
3651 WALNUT AVENUE, CHINO, CA 91710 • PHONE (909) 627-8178 • WEB DESCO.COM
