D-48

1760.932.347.23.518

101.

6

ø4

ø18.

3

16

ø18.

3

65.4 17318

ø4101.

6（63

.5）

16

Analog modelDigital model

RangeRange

L

D

Depth MicrometerSERIES 329, 129 — Interchangeable Rod Type

FEATURES• ø4mm interchangeable rods, with lapped

measuring end, provide a wide measuring range in 25mm increments.

• Ratchet stop provides constant force.• Measuring rod lock.• SPC output (Series 329).

Technical DataAccuracy: ±3µm/±.00015” for micrometer head feed (excluding quantizing error for digital models) ±(2+L/75)µm for interchangeable rod, L = Max. measuring length (mm) ±[.0001+.00005 (R/3)]” R = Max. measuring length (inch) Fraction rounded upResolution*: 0.001mm or .00005"/0.001mm (.0001”/0.001mm: 329-351-10)Graduation**: 0.01mm or .001”Flatness of reference face: 1.3µm (.00005”) for 63.5mm (2.5”) width base, 2µm (.0001”) for 101.6mm (4”) width baseFlatness of measuring rod face: 0.3µmParallelism between reference face and measuring rod face: (4+L/50)µm, L = Max. measuring length (mm) [.00016+.00004 (R/2)]” ,R = Max. measuring length (inch) Fraction rounded upMeasuring rod diameter: ø4mmDisplay*: LCDBattery*: SR44 (1 pc.), 938882Battery life*: Approx. 1.2 years under normal use*Digital models **Analog models

Functions of Digital Model2-point Preset, Zero-setting, Data hold, Automatic power ON/OFF, Data output, Preset inch/mm conversion (inch/mm models) Function lockAlarm: Low voltage, Counting value composition error

Optional Accessories for Digital Model05CZA662: SPC cable with data switch (1m)05CZA663: SPC cable with data switch (2m)02AZD790B: SPC cable for U-WAVE w/ data switch (160mm)

SPECIFICATIONSMetric

Range Order No. Base No. of rods0 - 150mm 329-250-10 101.6 x 16mm 60 - 300mm 329-251-10 101.6 x 16mm 12

Inch/Metric

Range Order No. Base No. of rods0 - 6” 329-350-10 4” x .63” 60 - 12” 329-351-10 4” x .63” 12

Metric

Range Order No. Base No. of rods0 - 25mm 129-154 63.5 x 16mm0 - 25mm 129-155 101.6 x 16mm0 - 50mm 129-109 63.5 x 16mm 20 - 50mm 129-113 101.6 x 16mm 20 - 75mm 129-110 63.5 x 16mm 30 - 75mm 129-114 101.6 x 16mm 30 - 100mm 129-111 63.5 x 16mm 40 - 100mm 129-115 101.6 x 16mm 40 - 150mm 129-112 63.5 x 16mm 60 - 150mm 129-116 101.6 x 16mm 60 - 300mm 129-152 63.5 x 16mm 120 - 300mm 129-153 101.6 x 16mm 12

Inch

Range Order No. Base No. of rods0 - 2” 129-129 4” x .63” 20 - 3” 129-126 2.5” x .63” 30 - 3” 129-130 4” x .63” 30 - 4” 129-127 2.5” x .63” 40 - 4” 129-131 4” x .63” 40 - 6” 129-128 2.5” x .63” 60 - 6” 129-132 4” x .63” 60 - 12” 129-149 2.5” x .63” 120 - 12” 129-150 4” x .63” 12

DIMENSIONSUnit: mm

329-250-10

129-110

Range 0 - 25mm 25 - 50mm 50 - 75mm 75 - 100mm 100 - 125mm 125 - 150mm 150 - 175mm 175 - 200mm 200 - 225mm 225 - 250mm 250 - 275mm 275 - 300mm

For digital model

Order No. 983501 983503 983505 983507 983509 983511 983525 983527 983529 983531 983533 983535

L 104mm 129mm 154mm 179mm 204mm 229mm 254mm 279mm 304mm 329mm 354mm 379mm

For analog model

Order No. 983505 983507 983509 983511 983525 983527 983529 983531 983533 983535 981781 981782

L 154mm 179mm 204mm 229mm 254mm 279mm 304mm 329mm 354mm 379mm 404mm 429mm

Interchangeable rod (Optional Accessories)

Range 0 - 1” 1 - 2” 2 - 3” 3 - 4” 4 - 5” 5 - 6” 6 - 7” 7 - 8” 8 - 9” 9 - 10” 10 - 11” 11 - 12”

For digital model

Order No. 983502 983504 983506 983508 983510 983512 983526 983528 983530 983532 983534 983536

L 104.3mm 129.7mm 155.1mm 180.5mm 205.9mm 231.3mm 256.7mm 282.1mm 307.5mm 332.9mm 358.3mm 383.7mm

For analog model

Order No. 983506 983508 983510 983512 983526 983528 983530 983532 983534 983536 981783 981784

L 155.1mm 180.5mm 205.9mm 231.3mm 256.7mm 282.1mm 307.5mm 332.9mm 358.3mm 383.7mm 409.1mm 434.5mm

Digital model Digital model

D-49

515-571

515-570

300 27

5 250 22

5 200 17

5 150 12

5 100 75 50 25

9292

3459

150 12

5 100 75

50 259

16

72

180

D

Depth MicrometerSERIES 128

Depth Micro CheckerSERIES 515

FEATURES• ø4mm measuring spindle.• Measuring spindle lock.

• Carbide-tipped measuring spindle model is available.

• Ratchet stop provides constant force.

Technical DataAccuracy: ±3µm (±.00015”) for micrometer head feed Graduation: 0.01mm or .001”Flatness of reference face: 1.3µm (.00005”) for 63.5mm (2.5”) width base, 2µm (.00008”) for 101.6mm (4”) width baseFlatness of measuring rod face: 0.3µm

SPECIFICATIONSMetric

Range Order No. Base0 - 25mm 128-101 63.5 x 16mm0 - 25mm 128-103* 63.5 x 16mm0 - 25mm 128-102 101.6 x 16mm0 - 25mm 128-104* 101.6 x 16mm

*with carbide-tipped measuring spindle

Inch

Range Order No. Base0 - 1” 128-105 2.5” x .63”0 - 1” 128-106 4” x .63”

FEATURES• The Depth Micro Checker is designed to

check and help set the range-end points of a depth micrometer.

Inch

Range Order No. Reference checking lengths available0 - 6” 515-575 1”, 2”, 3”, 4”, 5”, 6”

SPECIFICATIONSMetric

Range Order No. Reference checking lengths available0 - 150mm 515-570 25, 50, 75, 100, 125, 150mm0 - 300mm 515-571 25, 50, 75, 100, 125, 150, 175, 200, 225, 250, 275, 300mm

Technical DataBlock pitch accuracy: ±(1+L/150)µm,

L = Length to check (mm)Anvil block accuracy: ±0.5µm

(Refer to page VIII for details.)

DIMENSIONSUnit: mm

515-570

128-101 128-102

515-571

D-50

Up to 300mm range models( ): Coolant Proof models

Over 300mmrange models

73.5

L

100

2-ø5

5

107

2070 16

33 (41.

2) 250

4-ø9

65820

(27.

5)65

6527

.5

13

100

5

70

(20)

7

L

(86.7)

2 – ø5

(Refer to page VIII for details.)

D

ABSOLUTE Digimatic Depth GageSERIES 571

Technical DataAccuracy: ±0.02mm (≤200mm), ±0.03mm (≤300mm) ±0.05mm (≤600mm), ±0.06mm (≤750mm), ±0.07mm (≤1000mm) (excluding quantizing error)Resolution: 0.01mm or .0005"/0.01mmRepeatability: 0.01mmDisplay: LCDScale type: ABSOLUTE electrostatic (electromagnetic)* type linear encoderMax. response speed: UnlimitedBattery: SR44 (1 pc.), 938882Battery life: Approx. 20,000 hours [3 years (1 year: 300mm / 12” models)]* under normal use Dust/Water protection level: IP67**Coolant Proof models

FunctionsOrigin-set, Zero-setting, Automatic power on/off, Data output, inch/mm conversion (inch/mm models)Alarm: Low voltage, Counting value composition error

Optional Accessories959143: Data hold unit959149: SPC cable with data switch (1m)959150: SPC cable with data switch (2m)02AZD790C: SPC cable for U-WAVE w/ data switch (160mm)05CZA624: SPC cable with data switch (1m)*05CZA625: SPC cable with data switch (2m)*02AZD790A: SPC cable for U-WAVE w/ data switch (160mm)*––––––: Extension base (see page D-55.)*For Coolant Proof models

FEATURES• The ABSOLUTE Digimatic Depth Gage

keeps track of the origin point (once set) for the entire life of the battery.

• Base and measuring faces are hardened and micro-lapped.

• Optional wider extension bases are available. (up to 450mm range models)

• SPC data output.

SPECIFICATIONSMetric

Range Order No. Base (W x T)0 - 150mm 571-201-20 / 571-251-10* 100 x 6mm0 - 200mm 571-202-20 / 571-252-10* 100 x 6mm0 - 300mm 571-203-20 / 571-253-10* 100 x 6 (6.3)mm0 - 450mm 571-204-10 250 x 10mm0 - 600mm 571-205-10 250 x 10mm0 - 750mm 571-206-10 250 x 10mm0 - 1000mm 571-207-10 250 x 10mm

*IP67 Coolant Proof model

Inch/Metric

Range Order No. Base (W x T)0 - 6” 571-211-20 / 571-261-10* 3.93” x .23”0 - 8” 571-212-20 / 571-262-10* 3.93” x .23”0 - 12” 571-213-10 / 571-263-10* 3.93” x .23”0 - 18” 571-214-10 9.8” x .39”0 - 24” 571-215-10 9.8” x .39”0 - 30” 571-216-10 9.8” x .39”0 - 40” 571-217-10 9.8” x .39”

*IP67 Coolant Proof model

DIMENSIONSUnit: mm

Range L Base thickness0 - 150mm 237 60 - 200mm 287 60 - 300mm 403 (404) 6 (6.3)0 - 450mm 635 100 - 600mm 785 100 - 750mm 935 100 - 1000mm 1200 10

( ): Coolant Proof models

571-201-20

571-251-10

Measurement data output function is available with a water-resistant SPC cable.

(Refer to page VIII for details.)

571-253-10571-263-10

0047021102

D-51

107

7020

L

Up to 300mm range models

Over 300mm range models

100

4

70 16

34.5

2-ø5

11

8

6527

.565

6527

.5

30

110

L

2513

ø9

250

20

D

Vernier Depth GageSERIES 527

Technical DataAccuracy: Refer to the list of specifications. Graduation: 0.05mm, 0.02mm or .001”

Optional Accessories––––––: Extension base (see page D-55.)

FEATURES• Base and measuring faces are hardened

and micro-lapped.• Made of hardened stainless steel.• Optional wider extension bases are

available. (up to 450mm range models)

SPECIFICATIONSMetric

Range Order No. Vernier reading Accuracy Base (W x T) Remarks0 - 150mm 527-201 0.05mm ±0.05mm 100 x 6.5mm —0 - 150mm 527-121 0.02mm ±0.03mm 100 x 6.5mm —0 - 150mm 527-101 0.02mm ±0.03mm 100 x 6.5mm with fine adjustment0 - 200mm 527-202 0.05mm ±0.05mm 100 x 6.5mm —0 - 200mm 527-122 0.02mm ±0.03mm 100 x 6.5mm —0 - 200mm 527-102 0.02mm ±0.03mm 100 x 6.5mm with fine adjustment0 - 300mm 527-203 0.05mm ±0.08mm 100 x 6.5mm —0 - 300mm 527-123 0.02mm ±0.04mm 100 x 6.5mm —0 - 300mm 527-103 0.02mm ±0.04mm 100 x 6.5mm with fine adjustment0 - 600mm 527-204 0.05mm ±0.10mm 250 x 10mm —0 - 600mm 527-104 0.02mm ±0.05mm 250 x 10mm with fine adjustment0 - 1000mm 527-205 0.05mm ±0.15mm 250 x 10mm —0 - 1000mm 527-105 0.02mm ±0.07mm 250 x 10mm with fine adjustment

Inch

Range Order No. Vernier reading Accuracy Base (W x T) Remarks0 - 6” 527-111 .001” ±.001” 3.93” x .25” with fine adjustment0 - 8” 527-112 .001” ±.001” 3.93” x .25” with fine adjustment0 - 12” 527-113 .001” ±.0015” 9.8” x .39” with fine adjustment0 - 24” 527-114 .001” ±.002” 9.8” x .39” with fine adjustment0 - 40” 527-115 .001” ±.003” 9.8” x .39” with fine adjustment

DIMENSIONSUnit: mm

Range L0 - 150mm 2600 - 200mm 3100 - 300mm 4100 - 600mm 8000 - 1000mm 1200

527-201

527-101

Fine adjustment

D-52

L2

L1

L1= Reading on depth vernier

L1= Reading on hook vernier

L1= Reading on hook vernier — Reading on depth vernier

L3

21

10

9.5

L

2-ø5

11

10

7

26100

10

70

16

2-ø5 L

(57.5)

(41.

3)

D

Metric

Range: L1 (L2 and L3) Order No. Vernier reading Accuracy10 - 150mm (0 - 150mm) 527-411 0.02mm ±0.03mm10 - 200mm (0 - 200mm) 527-412 0.02mm ±0.03mm10 - 300mm (0 - 300mm) 527-413 0.02mm ±0.04mm

Depth GageSERIES 527, 571 — Hook End Type

FEATURES• The end of the main scale is hook-

shaped to allow depth and thickness measurements of a projected portion or lip in a hole, in addition to standard depth measurement.

• Fine-adjustment models are available.• Optional wider extension bases are

available.• SPC output (Series 571).

Metric

Range: L1 (L2 and L3) Order No. Vernier reading Accuracy10 - 150mm (0 - 150mm) 527-401 0.05mm ±0.05mm10 - 200mm (0 - 200mm) 527-402 0.05mm ±0.05mm10 - 300mm (0 - 300mm) 527-403 0.05mm ±0.08mm

DIMENSIONSUnit: mm

Range L0 - 150mm 2600 - 200mm 3100 - 300mm 410

Range L0 - 150mm 2470 - 200mm 297

527-401

571-254-10

SPECIFICATIONSMetric

Range: L1 (L2 and L3) Order No. Resolution Accuracy10 - 160mm (0 - 150mm) 571-254-10 0.01mm ±0.03mm10 - 210mm (0 - 200mm) 571-255-10 0.01mm ±0.03mm

Inch/Metric

Range: L1 (L2 and L3) Order No. Resolution Accuracy.4” - 6.4” (0 - 6”) 571-264-10 .0005” / 0.01mm ±0.03mm.4” - 8.4” (0 - 8”) 571-265-10 .0005” / 0.01mm ±0.03mm

Digital model

Digital model

(Refer to page VIII for details.)

Technical DataAccuracy: Refer to the list of specifications. (excluding quantizing error for digital models)Resolution*: 0.01mm or .0005"/0.01mmGraduation**: 0.05mm or 0.02mmRepeatability*: 0.01mmDisplay*: LCDScale type*: ABSOLUTE electromagnetic linear encoderMax. response speed*: UnlimitedBattery*: SR44 (1 pc.), 938882Battery life*: Approx. 3 years under normal use Dust/Water protection level*: IP67*Digital models **Analog models

Functions of Digital ModelOrigin-set, Zero-setting, Automatic power on/off, Data output, inch/mm conversion (inch/mm models)Alarm: Low voltage, Counting value composition error

Optional Accessories05CZA624: SPC cable with data switch (1m)*05CZA625: SPC cable with data switch (2m)*02AZD790A: SPC cable for U-WAVE w/ data switch (160mm)*––––––: Extension base (see page D-55.)*For digital models

(Refer to the VIII for details.)

with fine adjustment

0047021102

D-53

Extension base

Attach it to the depthgage base on a surface plate

Washer

Depth gage base

Mounting screw

Attaching the extension base

107

100 70

70 20

L

2-ø5

4 11

34.5

16

L

b a

177

a ba

R5 R5

n-M4×P=0.7No. 8-32UNC

D

Extension BasesOptional Accessories for Depth Gage

Dial Depth GageSERIES 527 — with Fine Adjustment

FEATURES• Easy-to-read dial.• Made of hardened stainless steel.

• Base and measuring faces are hardened and micro-lapped.

• Optional wider extension bases are available.

Technical DataAccuracy: Refer to the list of specifications. Dial reading: 0.05mm or .001”Base size: 100 x 6.5mm (W x T)

Optional Accessory––––––: Extension base

FEATURES• Attaches to the base (reference face) plate

of a depth gage to extend its span.• These extension bases cannot be attached

to 0 - 600mm, 0 - 1000mm, 0-24” and 0-40” range models.

SPECIFICATIONSMetric

Size L Order No. Dimensions a, b n180mm 900370 70mm, 55mm 2260mm 900371 35mm, 60mm 5320mm 900372 70mm, 55mm 4

Inch

Size L Order No. Dimensions a, b n7” 900367 2.76”, 2.17” 210” 900368 1.38”, 2.36” 512” 900369 2.76”, 2.17” 4

DIMENSIONSUnit: mm

Range L0 - 150mm 2600 - 200mm 3100 - 300mm 410

527-301-50

DIMENSIONSUnit: mm

900372

Order No. L a b n900370 180 70 55 2900371 260 35 60 5900372 320 70 55 4

Extension base

Inch

Range Order No. Dial reading Accuracy0 - 6” 527-311-50 .001” ±.001”0 - 8” 527-312-50 .001” ±.001”0 - 12” 527-313-50 .001” ±.0015”

SPECIFICATIONSMetric

Range Order No. Dial reading Accuracy0 - 150mm 527-301-50 0.05mm ±0.05mm0 - 200mm 527-302-50 0.05mm ±0.05mm0 - 300mm 527-303-50 0.05mm ±0.08mm

D-54

D

ABSOLUTE Digimatic/Dial Depth GageSERIES 547, 7

FEATURES• ABSOLUTE Digimatic Depth Gage keeps

track of the origin point (once set) for the entire life of the battery (Series 547).

• Wide probing range is available with the supplied extension rod.

• Bottom surface of the base is hardened, ground and lapped for highest degree of flatness.

• Designed with a back plunger type dial indicator for upward-facing reading. (7231, 7237, 7238)

• SPC data output (Series 547).

Technical Data of Digimatic ModelAccuracy: Refer to the list of specifications.

(excluding quantizing error for digital models)Resolution:

0.01mm type 0.01mm 0.001mm type 0.001mm/0.001mm .0005”/0.01mm type .0005”/0.01mm .00005”/0.001mm type .0005”/.0001”/.00005”/ 0.01mm/0.001mm

Flatness of base face: 5µm or 2µmContact point: Carbide-tipped ball point or needleMeasuring force: 1.5NDisplay: LCDScale type: ABSOLUTE electrostatic linear encoderMax. response speed: UnlimitedBattery: SR44 (1 pc.), 938882Battery life: Approx. 7,000 hours under normal use

Technical Data of Dial ModelAccuracy: Refer to the list of specifications.Dial reading: 0.01mm or .001”Flatness of base face: 5µm or 2µmContact point: Carbide-tipped ball point

(needle point: 7210, 7222)Measuring force: 1.4N (2.5N: 7213, 7214, 7217S, 7218S)

Functions of Digital ModelOrigin-set/Preset, Zeroset, GO/±NG judgment, Counting direction switching, Power ON/OFF, Simplified calculation, Function lock, Data hold, Data output, inch/mm conversion (inch/mm models)Alarm: Low voltage, Counting value composition error,

Over-flow error, Tolerance limit setting error

Optional Accessories for Digital Model905338: SPC cable (1m)905409: SPC cable (2m)02AZD790F: SPC cable for U-WAVE (160mm)

SPECIFICATIONSMetric

Range Order No. Stroke Accuracy Extension rod Base (W x T, flatness)0 - 200mm 547-211 12.7mm ±20µm 5 pcs. (10, 20, 30, 30, 100mm) 63.5 x 16mm, 5µm0 - 200mm 547-212 12.7mm ±20µm 5 pcs. (10, 20, 30, 30, 100mm) 101.6 x 16mm, 5µm0 - 200mm 547-251 12.7mm ±5µm 5 pcs. (10, 20, 30, 30, 100mm) 63.5 x 16mm, 2µm0 - 200mm 547-252 12.7mm ±5µm 5 pcs. (10, 20, 30, 30, 100mm) 101.6 x 16mm, 2µm

Inch/Metric

Range Order No. Stroke Accuracy Extension rod Base (W x T, flatness)0 - 8” 547-217S .5” ±.001” 4 pcs. (.5”, 1”, 2”, 4”) 2.5” x .63”, .0002”0 - 8” 547-218S .5” ±.001” 4 pcs. (.5”, 1”, 2”, 4”) 4” x .63”, .0002”0 - 8” 547-257S .5” ±.0002” 4 pcs. (.5”, 1”, 2”, 4”) 2.5” x .63”, .00008”0 - 8” 547-258S .5” ±.0002” 4 pcs. (.5”, 1”, 2”, 4”) 4” x .63”, .00008”

Metric

Range Order No. Stroke Accuracy Extension rod Base (W x T, flatness)0 - 10mm 7210* 10mm ±15µm — 40 x 16mm, 5µm0 - 200mm 7211 10mm ±15µm 5 pcs. (10, 20, 30, 30, 100mm) 63.5 x 16mm, 5µm0 - 200mm 7212 10mm ±15µm 5 pcs. (10, 20, 30, 30, 100mm) 101.6 x 16mm, 5µm0 - 210mm 7213 30mm ±30µm 3 pcs. (30, 60, 90mm) 63.5 x 16mm, 5µm0 - 210mm 7214 30mm ±30µm 3 pcs. (30, 60, 90mm) 101.6 x 16mm, 5µm0 - 200mm 7220 10mm ±15µm 5 pcs. (10, 20, 30, 30, 100mm) 100 x 18mm, 5µm0 - 200mm 7221 10mm ±15µm 5 pcs. (10, 20, 30, 30, 100mm) 150 x 18mm, 5µm0 - 10mm 7222* 10mm ±15µm — ø16mm, 5µm0 - 10mm 7223 10mm ±15µm — ø25mm, 5µm0 - 10mm 7224 10mm ±15µm — ø40mm, 5µm0 - 200mm 7231 5mm ±15µm 5 pcs. (10, 20, 30, 30, 100mm) 63.5 x 16mm, 5µm

*with needle probe

Inch

Range Order No. Stroke Accuracy Extension rod Base (W x T, flatness)0 - 8” 7217S 1” ±.002” 3 pcs. (1”, 2”, 4”) 2.5” x .63”, .0002”0 - 8” 7218S 1” ±.002” 3 pcs. (1”, 2”, 4”) 4” x .63”, .0002”0 - 8” 7237 .2” ±.002” 4 pcs. (.5”, 1”, 2”, 4”) 2.5” x .63”, .0002”0 - 8” 7238 .2” ±.002” 4 pcs. (.5”, 1”, 2”, 4”) 4” x .63”, .0002”

.0005”/0.01mm graduation .00005”/0.001mm/ graduation

0.01mm graduation 0.001mm graduation

(Refer to page VIII for details.)

7211

7214

72227224

7231547-211

Digital Type

Digital Type

Dial Type

Dial Type

D-55

7210 7222

7220

7221

7231, 7237 A= 63.5mm7238 A= 101.6mm

7213, 7217S A= 63.5mm7214, 7218S A= 101.6mm

7223 A= ø25mm7224 A= ø40mm

7211 A= 63.5mm7212 A= 101.6mm

M2.5x0.45

25

(11)

ø16

ø5A

14

(11)

(35)

(65)

(100

)

(65)

(10)

(10)

(114

)

(65)

(104

)

ø5

(10)

A

17

ø16

12

35.5

ø15.4

12

65

114

35.5ø16

100

ø5

5025

ø16

ø11

(18)

(35.

7)

(10)

(100

)

(65)

(10)

(100

)

(65)

(30)

(104

)(6

5)

(35.

7)

(18)

ø11

ø16

25 75

ø5

150

ø16

17

A

(5)

(35)

(11)

(64)

ø39

1717

17

17

22

SR1.5

SR 1.5

SR 0.2

SR 0.2

SR 1.5

SR 1.5

SR 1.5

ø40

ø57

ø57

ø57

ø57ø57

ø8

ø6

ø8

ø8

ø5 ø3ø5

ø8

ø8

ø6 ø6.5

ø8

ø6.5ø6ø5

ø8

ø57

(35)

SR 1.5

547-211, 547-251, 547-217S, 547-257S A= 63.5mm547-212, 547-252, 547-218S, 547-258S A= 101.6mm

547-211, 547-212, 547-251, 547-252 B= 12mm547-217S, 547-218S, 547-257S, 547-258S B= 12.9mm( )

835

.5

(10)

A

17 SR1.5

ø57

ø8

ø5

ø16

ø5

(B)

17

(35)

(105

)

(67)

(11)

A

SR1.5

ø6

ø59

D

DIMENSIONSUnit: mm

D-56

2960

113

571-100MOT-10 700-104

83

164

4.3

ø1.5

ø3

13

25

10

87.2

(60) 16

(3.5

)

ø30.8

ø3

D

DIMENSIONSUnit: mm

Tire Tread Depth GageSERIES 571, 700

FEATURES• ABSOLUTE Digimatic Tread Depth Gage

keeps track of the origin point (once set) for the entire life of the battery (Series 571).

• Specially designed to measure tire tread depth.

• Plastic construction for lightweight use (Series 700).

• With SPC data output (Series 571).

Technical DataAccuracy: Refer to the list of specifications.

(excluding quantizing errorResolution: 0.01mm or .0005"/0.01mm (571 Series)

0.1mm or .001”/0.1mm (700 Series)Display: LCDBattery: SR44 (1 pc.), 938882Battery life: Approx. 2 years under normal use

(approx. 2000 hours: Series 571)

FunctionsOrigin-set*, Zero-setting, Data output* Power ON/OFF, inch/mm conversion (inch/mm models)Alarm: Low voltage, Counting value composition error* Series 571

Optional Accessories for Series 571959143: Data hold unit959149: SPC cable with data switch (1m)959150: SPC cable with data switch (2m)02AZD790C: SPC cable for U-WAVE w/ data switch (160mm)

SPECIFICATIONSMetric

Range Order No. Accuracy0 - 25mm 571-100MOT-10 ±0.02mm0 - 25mm 700-104 ±0.2mm

Inch/Metric

Range Order No. Accuracy0 - 1” 571-200MOT-10 ±.0005”0 - 1” 700-105 ±.008”

(Refer to page VIII for details.)

700-104

b

d

c

e

a

Depth Base AttachmentOptional Accessory for Calipers

FEATURES• For 100mm, 150mm, 200mm, 300mm, 4”,

6”, 8” and 12” vernier and dial calipers which have a depth measuring bar.

• Finely ground base surface and secure locking clamp.

SPECIFICATIONSMetric

Size Order No. Applicable measuring range of caliper75mm 050083-10 100mm, 15mm, 200mm, 4”, 6” and 8”100mm 050084-10 100mm, 15mm, 200mm, 4”, 6” and 8”125mm 050085-10 300mm and 12”

Size a b c d e75mm 25 75 24.5 9 16100mm 25 100 24.5 9 16125mm 30 125 28.5 11.5 20

f: Base thickness

050084-10

DIMENSIONS

Unit: mm

Depth baseattachment