DEPARTMENT OF MECHANICAL ENGINEERING 17th July 1950

A Brief Profile and Progress Report(2012-2017)

Param Guru Huzur Mehtaji Maharaj, August Founderof DEI Engineering College, Ex Chief Engineer PWDPunjab, Chancellor Medalist of Thompson College ofCivil Engineering Roorkee, inaugurating Workshop ofEngineering College, Dayalbagh in 1953

Presentation Outline

Department profile

Programmes offered

Teaching/Learning milestones

Research highlights

Collaborations

Facilities available

Outreach

Future roadmap

Brief Departmental Profile

Teaching Staff

12 Ph.Ds. (50 %)

Teaching Staff : 22

No. of Students : 371

Teacher-Student Ratio : 1:17

Prof. Ranjit Singh was given UGC Emeritus Fellowship in 2017.

Designation No. of Faculty

Professors 6

Associate Professors 2

Assistant Professors 11

Emeritus Professors 3

Total 22

Students Enrolment Profile

Women Enrolment : 18 %

Brief Departmental Profile

S.No. CoursesMechanical

MaleStudents

Female Students

1. B.Tech - I year 57 152. B.Tech – II year 69 113. B.Tech– III year 58 114. B.Tech– IV year 50 185. M.Tech– I year 24 Nil6. M.Tech– II year 13 Nil7. M.Tech(Part-Time)–I Yr 10 18. M.Tech(Part-Time)–II Yr 6 Nil9. M.Tech(Part-Time)–IIIYr 5 Nil

10. M.Tech(Part-Time)–IVYr 4 Nil11. Ph.D. 9 Nil12. Ph.D. (Part Time) 10 Nil

Total 315 56

1. Programmes Offered

Programmes Offered• B.Tech. Mechanical Engg. • B.Tech. Mechanical Engg. with specialization in Industrial Engineering• B.Tech. Mechanical Engg. with specialization in Computer Science• M.Tech. in Engineering Systems• M.Tech. in Engineering Systems (Part-time)• Ph.D.(Interdisciplinary courses and Departments involved)

Electrical EngineeringCivil Engineering

Total Quality Management (TQM) and Continuous and Sustainable Development (KAIZEN) are the hall marks of our curriculum

1. New courses introduced

Value Engineering

Design of Thermal Systems

Industrial Heat Exchangers

Additive Manufacturing

Integrated Supply Chain Management

Academic ProgramMechanical Engineering

B. Tech. degree with broad based curriculummultidisciplinary approach and socially relevant education

Design Engineering

Production Engineering

Industrial Engineering

Thermal Engineering

Computer Science Specialization Industrial Engg. Specialization

M. Tech. in Engineering Systems Integrated MBA

Integrated M. Tech in Engineering Systems

Ph. D. in Mechanical Engineering Integrated Ph. D. in Mechanical Engineering

Curricular Design and Development

1.2 Academic flexibility

2. Teaching-Learning-Evaluation

Achievements : Awards – Students

2.6 Student Performance and Learning Outcome

Awards : 12

Alumni Achievements :

Awards: 50

Success in National Competitive Exams in last 5 yrs

GATE : 109

COURSES OFFERED/SUPPORTED BY WORKSHOP

Workshop Practice-I & II for B.Tech. (CE/EE/ME/FwT)

Workshop Practice for B.Voc. (Renewable Energy, Automobile,

Dairy Tech., Water Sanitation and Solid Waste Management), B.Arch., D.Arch., Diploma in Engg. (ME/EE/Auto.)

Model Making (Mechanical) – Co-Curricular Activities

Furniture Design – Work Experience Course

In-house Practical Summer Training

Product Manufacturing Project (PMP)

Design Engineering/ Theme Development (DE/TD) Project

Production Engineering Lab.

Automated Manufacturing Systems Lab. (UG & PG)

UG/PG Projects

Placement of students in the last five years

Batch Year Participated Students Placed

2012-13 65 65

2013-14 64 60

2014-15 65 57

2015-16 62 54

2016-17 111 83

Total No. of Students 367 319

Companies: Anglo Eastern, Head Strong, Isgec Heavy Engg. Ltd, Lohiya Pvt. Ltd., Maruti Suzuki Ltd, Tata Power, TCS, Fiat India Ltd., Honda Cars, Tech. Mahindra, ISGEC Yamuna Nagar, LAVA International, Daurala Sugar Works, HCL Tech., Torrent Power Agra, HMSIL, Armacell Pune, MAN Trucks India Indore, SAP Labs India, DCM Sri Ram Group, Genpact/Headstrong Noida, Maruti Manesar, Timex, TVS Chennai, Raghunandan Money Agra, NLMK Mumbai, AtulGroup of Industries Agra, Jamuna Auto Jamshedpur, Zia Electronics Bangalore, DSCL Kota, LG Electronics, Crompton Greaves

THRUST AREAS

Computer Aided Design and OptimizationProduction Processes and ManufacturingEnergy Management and Renewable Energy, Industrial Engineering, Ergonomics, Fuzzy Systems and Biomechanics, Intelligent & Agile Manufacturing SystemsSoft Computing and quantum computing,Additive Manufacturing

3. Research, Consultancy and ExtensionResource Mobilization

Annual Budget of Department : Rs. 1.5 lakhs

Funds generated from Extra-Mural Projects:▪ Projects Completed : Rs. 9 crores▪ Projects In Progress : Rs. 3.55 crores

Funding Agencies : ADRDE, DRDO, DST, UGC-SAP, MHRD, PCRA, AICTE, CSIR.

Major Funding

▪ DST-FIST : 456.24 lakhs (1996 - 2017)

▪ UGC-SAP : 80.46 Lakhs (2009 - 2017)

▪ MHRD-NMEICT Mission Programme : 6.18 Crores

Research Impact

h-Index (Faculty): 2 – 10

i-10 Index (Faculty): 1 – 10

Impact Factor: 0.33 – 3.78

Total Citations: 780

Research Publications in last 5 years▪ Journals : 46▪ Intl./Natl. Conf. Proc. : 52▪ Books/Book Chapters : .2

Journals Impact Factor

Journal of Material Science and Mechanical Engineering 3.78International Journal of Hydrogen Energy 3.58Applied Soft Computing 3.541Journal of Engineering, Science and Management Education 3.22

International Journal of Advanced Technology in Engineering and Science (IJATES) 2.87

International Journal of Engineering Research & Technology 2.85Applied Thermal Engineering 2.73The International Journal of Engineering and Science 2.72JCSE-International Journal of Computer Sciences and EngineeringJCSE 2.63International Journal of Structural and Multidisciplinary Optimization (2016), Springer 2.2

GE- International Journal of Engineering Research, (IJER) 1.63

A Journal of Prevention, Assessment & Rehabilitation 0.779

Iranian Journal of Fuzzy Systems 0.534

International Journal of Computational Intelligence Systems 0.391

3. Research, Consultancy and Extension

Research Output

▪ Ph.D Awarded : 8

▪ Ph.D Submitted : 5

▪ Ph.D Enrolled : 15

▪ Patents : 1

Organization of Scientific Events

International Conferences /Workshops : 6

National Conferences/Workshops/Seminars : 15

Seminars from Distinguished Visiting Scientists : 6

National Seminar on Ergonomics, Biomechanics & Occupational

Health, March 2013

National Workshop on Biofuels: Prospects and Challenges

December 2012

3. Research, Consultancy and Extension

Faculty Awards and Recognitions

▪ International : 2

▪ National : 14

▪ Best Paper Awards : 11

▪ Visiting Professorship : 1

▪ Visiting Scientists : 1

▪ Invited Talks : 5

• Abroad : 4

• In India : 1

Details of Awards and Recognitions By Faculty Members

Prof. K. Hans Raj

Best Paper Award for a Journal paper, A Quantum Inspired Evolutionary Computational

Technique with Applications to Structural Engineering Design, JCSE- International Journal of

Computer Sciences and Engineering, Vol. 5, Issue 5, pp. 20-33, 2017.

Chaired three Technical Sessions and delivered one Key note address and One Invited

Talk at the International Conference on Numerical Modelling of Industrial Forming Processes

(NUMIFORM 2016) at University of Troyes, France 4th-7th July 2016.

Invited Talk and Research Interaction at at Centre for Material Forming (CEMEF), Sophia

Antipolis, France on Agile Manufacturing, July 2016. He, during his talks on Finite Element

Simulation of Selected Severe Plastic Deformation Processes mentioned the Objectives of

Education at DEI, Vision-2031 and Consciousness Studies being carried out at DEI. He also

visited various laboratories at University of Technology Troyes and had research interaction

with Prof. Pascal Lafon, Head of Mechanical Engineering Department.

Dr. K. Hans Raj Chaired three technical sessions, presented an invited talk and a Key note

address at International Conference on Numerical Modelling of Industrial Forming Processes

(NUMIFORM-2016) at University of Technology, Troyes, France from 4th to 7th July.

Leader of Technology and Innovation Award, at International Conference on Advanced

and Agile Manufacturing Systems (ICAM 2015) at KNIT, Sultanpur, India on 28th December

2015.

Lifetime Achievement Award, by ISAM at University of Oakland, MI, USA during Intl.

Conference on Agile and Advanced Manufacturing Systems(ICAM-2014), 28May 2014.

•Best Paper award and Best Service Award by University of Oakland, MI, USA during International Conference on Agile and Advanced Manufacturing Systems (ICAM-2014), 28th May 2014.

•Best Paper Award by IIT-BHU for paper entitled "Plastic deformation of Al6061 during equal channel angular pressing: A case study" during International conference on Agile Manufacturing (ICAM-2012), Dec. 16-19 2012.

•Elected as Secretary, ISPE-USA, at University of Oakland, MI, USA, 30th May 2014.•Elected as Fellow of Aeronautical Society of India (FAeSI) on 21st July 2012.•Nominated as President, International Society of Agile Manufacturing, USA, Dec. 2012.•DST R&D Project of undersigned entitled “Modeling and Experimental Study of Severe Plastic Deformation using Equal Channel Angular Pressing (ECAP)”, was rated to be “Very Good” by Program Advisory Committee (PAC), 30th October 2012.•Honoured as Co-Chair of International Conference on Agile Manufacturing (ICAM-2012) at IIT-BHU from 16th to 20th December 2012.•Nominated as Associate Chief Editor, International Journal of Advanced Manufacturing Systems (IJAMS), 2012.•Nominated as Member Executive Board DRDO of Project AKAASHDEEP, Delhi, 7th Jan.2012.•Nominated as Expert for Review of High Speed Sled and Para System for SAE 500Kg Class, ADRDE (DRDO),3rd January 2012.•Nominated as Member Board on DRDO Laboratory Award and DRDO Cash Award Meeting, ADRDE(DRDO), 18th January 2012.•Nominated as Expert from DEI for Preliminary Design Review of Mechanical Subsystems of Project NAKSHATRA, DRDO, 11th February 2012, New Delhi.

•Honoured as Chief Guest, Valedictory Function of National Conference on Recent Developments in Production and Thermal Engineering, 18th February 2012, MPCT, Gwalior.

Faculty Honours

Dr. R. Singh receiving ISTE AwardDr. K. Hans Raj receiving Life Time Achievement Award at IIT BHU.

Prof. K. Hans Raj, Dayalbagh Educational Institute acted as Chief Guest for Valedictory function of RAME-2012 on 9th June 2012 at SGI Mathura.

Prof. K. Hans Raj, Dayalbagh Educational Institute being facilitated as Chief Guest of National Conference on “Recent Developments in Production and thermal Engineering” (NCRDPTE-2011) at Maharana Pratap College of Technology, Gwalior.

•Prof. S. K. Srivastav•Instituttion of Engineers Medal 2001.•Dr. Rahul Swarup Sharma•Awarded BOYSCAST Fellowship by Govt. of India for pursuing research at Rensselaer Polytechnic Institute, Troy, New York, USA during year 2009.•Best paper award at National Systems Conference organized at IIT-Roorkee in December 2008.•Best paper award at National Systems Conference, NIT-Surathkal, December 2010.•The Institution Medal by The Institution of Engineers (India) for the year 2001•Institution of Engineers “Certificate of Merit” for the research paper Mr. Kumar Ratnakar•Best Paper Award for paper in ICAM 2011 held at DEI.•Dr Aditya•Lead Guest Editor for the Special Issue of Advances in Mechanical Engineering (Impact Factor 0.827) on “Advanced Modelling and Dynamic Analysis of Rotating Systems”.•Lead Track Chair in the Track on Diagnostics and Prognostics of Mechanical Systems in 1st International and 4th National Conference on Reliability and Safety Engineering (INCRS - 2018), Jointly Organized by PDPM -Indian Institute of Information Technology, Design and Manufacturing Jabalpur and Society for Reliability and Safety (SRESA), Mumbai.•Member of American Society of Mechanical Engineers (ASME), Annual (Since 2012)•Institutional fellowship to visit USA to attend ASME Conference in August 2014.•SERB (DST) fellowship to visit Italy to attend IFTOMM Conference in September 2014.•Mr. Manoj Dixit•Best paper award at International Conference on Clean and Green Energy (ICCGE) 2016, Rome, Italy.•Mr. Atul Suri•Director’s medal in M.Tech., Director’s medal for scoring highest marks in Comparative Study of Religion 99•Best paper award at International Conference on Agile Manufacturing (ICAM-2011) at DEI.•Best paper award at International Conference on Agile Manufacturing (ICAM-2012) at IIT BHU.•Best participant award for refresher course JNVU, Jodhpur 2016.

3. Research, Consultancy and Extension

Recognitions

Fellows, Professional Bodies : 5

Members of Editorial Boards of Journals : 6

Members of Review Boards of Journals : 6

Consultancy (Industrial or other)

Organizations Funds Generated (in Lakhs)

ADRDE, DRDO 49.83

PROFESSIONAL CONSULTANCY SERVICES OFFERED

Consultancy to Engineering Institutions: Faculty of Engineering and Technology Agra College, Agra (2004)

Hindustan College of Science and Technology, Farah, Mathura (1996)

Consultancy to Industries: Replacement of Centrifugal Pump

M/s. Brajesh & Brothers Udyog, Industrial Area, Agra (Fabrication of

Forging Die for Synchronizer Rings for Synchromesh Gear Box of Maruti

Car)

M/s. Garg Engineering, Agra (Verification of Orifice hole diameter of

Orifice plate no. 8283)

M/s. Britannia Engineering Company, Foundry Nagar, Agra (Fabrication of

Broaching Die for Synchronizer Rings, Fiat & Maruti Car)

Aero-space Flexible structures, Civil Structures etc.

Many of these projects immensely contribute to uplift of local industries and Government organizations including Defense.

Department Publications

3.7 Collaborations

Research Collaborations

International National

• CEMEF, France

• University of Kiel, Germany

• Oakland University, Michigan, USA

• MIT, Boston, USA

• University of Maryland, USA

• Michigan University, USA

• Western Michigan University, USA

• IIT, Delhi

Signing of MOU with

School of Engineering, University of Michigan

4. Infrastructure and Learning Resources

4.1 New Facilities/Labs./Major Equipment Added

• Industrial kinesiology Lab extension

• Incubation Centre• Additive Manufacturing

Infrastructure and Learning Resources Contd.

IT Infrastructure• WiFi Facility• Video Conferencing Facility : One Room

Library as a Learning Resource• UGC INFLIBNET e-journals• Departmental Libraries : No. of Books : 1000

Additive Manufacturing (3D Printing) facility

Stratasys Fortus 400mc 3D Printer System; Objet 30 Pro Desktop 3D Printer; Mojo 3D Printer Desktop 3D Printer; Makerbot Replicator 2 Desktop 3D PrinterSteinbichler COMET L3D 2M professional 3D scanner System

Juggad Innovation of 3D Printing @ DEIAcross multiple levels

3D Printers Developed by Students in Lab @DEI

OUTREACH Conversion of an Old Bus was into a Fire Brigade-cum-Water

Tanker

Improved Photo Therapy Unit for treatment of Jaundice in

Infants

Cutting Machine used in Press and Publications

Low Cost Seat on Bicycles for small children

Conversion of Low Height Desks into seating benches and

study desks for Day Boarding School

Pedal-driven Fodder Cutting Machine – A Remedy for Arthritis

Gear Profile Testing Apparatus

Hand Rotary Tool for Spherical Turning on Lathe Machine

33-kV Sub-station Panel Assembly, etc.

OUT REACH PROGRAM OF SOCIAL SERVICE AT VILLAGE PADAHAN- HIMACHAL BY STAFF OF MECHAICAL ENGINEERING

DEPARTMENT

INNOVATIONS AND COMMUNITY SERVICES

Driver Cabin of Fire Brigade-cum-Water Tanker

PHTO THERAPY MACHINE PEDAL-DRIVEN FODDER CUTTING MACHINE

Fire Brigade-cum-Water Tanker Fire Brigade-cum-Water Tanker

Teak wood for Conference Table Conference Table Conference Table Conference Table

REFURBISHING OF OLD BUS AND TRUCK FOR COMMUNITY SERVICE

INCUBATION CENTRE & CENTRE FOR NON-TRADITIONAL MACHINING

Prof. Jannes Slomp Prof. Jannes Slomp Prof. Jannes SlompProf. Jannes Slomp Prof. Jannes Slomp

FEW SNAPS OF VISITS BY EMINENT PERSONS

Mitsubishi Team on 17.03.2015

Prof. Jannes Slomp on 06.01.2015

Padamshree Dr. D.K. Hazra on 30.1.2014

Bharat Ratna Dr. A.P.J. Abdul Kalam in 1993 & 2011

Nobel Laureate Prof. Richard R. Ernst in 2005

Dr. D.K. Hazra Dr. D.K. Hazra Dr. D.K. Hazra Dr. A.P.J. Abdul Kalam Dr. A.P.J. Abdul Kalam

Work Experience Courses (WEC) for 2nd Year Students to get hands on skill of different areas of their interest.

➢ IC Engines, R & AC, Metrology etc..

➢ Maintenance and repair of buildings and construction sites

➢ Photography

➢ Repair of Electrical Equipment's

Six months Co-op training of students after completion of 3rd year, in various reputed organizations/Industries to get exposure to the latest work culture of industries and handling projects related to productions and industrial R & D.

➢ TATA MOTORS, TATA HITACHI, TATA COMMINS, TCS, ISWP

➢ FIAT, MARUTI, HONDA, NEW HOLLAND, YAMAHA, TVS MOTORS.

➢ SRF, L&T, L&T Boilers

Core Courses for evolving a complete man.

➢ GKC, CRC, CEC, GAMES, AGOP, Social Service, CCA and Industrial Psychology.

BEST PRACTICES MECHANICAL ENGINEERING DEPARTMENT

5. Future Plan of Action

Departmental Vision – 2031Important Milestones to be achieved• To make the department one of the top 10 departments of

India.• 100% students to appear in GATE Examination• Maintaining percentile 99.9 in GATE as was done for last 31

years.• Aim towards 100% placements.• To create the following Centers of excellence:

• Agile Manufacturing• Non-conventional Energy• Innovation, Incubation and Entrepreneurship

• Excellence in Research and Development • 10 Significant Start- ups in Engineering.