33
DEPARTMENT OF MECHANICAL ENGINEERING INTRODUCTION The Department of Mechanical Engineering is the one of the largest and oldest Departments of the Institute. Major activities of the Department include teaching, laboratory development, resear ch and providing technical consultancy to industri es. The goa l of the Department is to provide students with a variety of educatio nal expe ri ences- developing their problem solving skills, cha ll engi ng them with open-end ed problems and design projects, providing opportu nity for teamwork and making research or independent study experiences avai lab le to the students with the desire and capability. Curri cu lum is continuously upgraded and moderni zed by the introduction of new courses for the BTech and MTech programmes. Th e Department continu ed setti ng up of new laboratories and adding of new equipment to the existing laboratori es . Procurement of books, back volumes and journals continu ed for the growth of central library. In stitute-industry partnership is being strengthened by providing consultancy services to the industry and receiving in turn training for the students. The Depa rtment is also involved in consultancy work for the dissemination of technology to the local rural population. The faculty members of the Departme nt are engaged in sta rting various centres in the In stitute-Centre for En ergy, Centre for Educ ationa l Tec hnology, Ce ntr e for the Environment and Centr e for Nanot ec hno logy. Th e Department is also involved in the rural technology project. Central Workshop F aci liti es comprisi ng of machin es having higher accu racy, precision and variety are being used for teachi ng and developing new in-h ouse experim ental setups. The BT ech, MTech and PhD students' project works are being undertaken in the workshop. In add ition to these, the workshop caters to the requirement of ot her Departments' student projects and works related to other sponsored and consultancy projects. ACADEMIC ACTLVITIES The Mechanical Engin ee ring Department is cu rrently offering BTech, MTech and PhD programmes. The BTech programme offers a comprehensive fundamental education in mechanical engineering, emphasizing basic sciences and mathematics, followed by engi nee ring sciences and engi n eering design. The D epart ment offers MTech programme in two specializations, i.e. Machine Design and Thermal and Fluid Sciences. From year 2007-2008, it will offer MTech in Computer Assisted Manufacturing. The programme consists of cou r se work in the areas of specialization fo ll owed by a one year dedicated thesis work. Annual Report 2006·2007 STUDENT INTAKE BT ech: 55 MTech: 54 PhD: 7 Degrees Awarded BT ec h: 41 MT ech: 36 FACULTY STRENGTH Th e Department has twenty faculty memb ers ason 31 M arch 2007. Professor : 7 Associate Professo r: 7 Assistant Professo r: 6 MAJOR EQUIPMENT AND FACILITIES Th e Department has exce ll ent compu ti ng facilities as well as various laboratories with state-of-the-art technical eq uipment. Th ey are mainly: Advanced Manufacturing Laboratory Str ength of Materials Laboratory Materials Sci ence Laboratory Fluid M echanics Laboratory Th ermal Sci ence Laboratory Turbo-m achinery Laboratory IC Engin e Laboratory Vibrations and Acoustics Laboratory Mechatronics and Robotics Laboratory Instrumentation Laboratory Th eory of Machines Laboratory Tribology Laboratory CAD/CAM Laboratory RESEARCH AND DEVElOPMENT ACTIVITIES Faculty members are actively engaged in research. The number of publications in reputed journals is increasing year by year. A number of sponsored research and consultancy projects are being investigated in the Department. The major research areas are fluid mechanics, thermal science, design, manufacturing and material science. The faculty members are exploring newer areas like micro-manufacturing, magnetic bearings, smart structures and nano-fluid mechanics. 101

DEPARTMENT OF MECHANICAL ENGINEERING › pro › sites › default › files › AR_06-07_w-05.pdfProcessing, 20 (7), pp.1590-1614, 2006 R. Tiwari and N. Dharmaraju 'Identification

  • Upload
    others

  • View
    4

  • Download
    0

Embed Size (px)

Citation preview

Page 1: DEPARTMENT OF MECHANICAL ENGINEERING › pro › sites › default › files › AR_06-07_w-05.pdfProcessing, 20 (7), pp.1590-1614, 2006 R. Tiwari and N. Dharmaraju 'Identification

DEPARTMENT OF MECHANICAL ENGINEERING

INTRODUCTION

The Department of Mechanical Engineering is the one of the largest and oldest Departments of the Institute. Major activities of the Department include teaching, laboratory development, research and providing technical consultancy to industri es. The goal of the Department is to provide students with a variety of educational experi ences­developing their problem solving skills, challengi ng them with open-ended problems and design projects, providing opportu nity for teamwork and making research or independent study experiences avai lable to the students with the desire and capability. Curri cu lum is continuously upgraded and modernized by the introduction of new courses for the BTech and MTech programmes. The Department continued setting up of new laboratories and add ing of new equipment to the existing laboratori es. Procurement of books, back volumes and journals continued for the growth of central library. Institute-industry partnership is being strengthened by providing consultancy services to the industry and receiving in turn training for the students. The Department is also involved in consultancy work for the dissemination of technology to the local rural population.

The faculty members of the Department are engaged in starting various centres in the Institute-Centre for En ergy, Centre for Educational Technology, Centre for the Environment and Centre for N anotechnology. Th e Department is also involved in the rural technology project.

Central Workshop Faci liti es comprisi ng of machines having higher accu racy, precision and variety are being used for teaching and developing new in-house experim ental setups. The BTech, MTech and PhD students' project works are being undertaken in the workshop. In add ition to these, the workshop caters to the requirement of other Departments' student proj ects and works related to other sponsored and consultancy projects.

ACADEMIC ACTLVITIES

The Mechanical Engineering Department is cu rrently offering BTech, MTech and PhD programmes. The BTech programme offers a comprehensive fundamental education in mechanical engineering, emphasizing basic sciences and mathematics, followed by engi neering sciences and engi neering design. The Department offers MTech programme in two specializations, i.e. Machine Design and Thermal and Fluid Sciences. From year 2007-2008, it will offer MTech in Computer Assisted Manufacturing. The programme consists of cou rse work in the areas of specialization foll owed by a one year dedicated thesis work.

Annual Report 2006·2007

STUDENT INTAKE

BTech: 55 MTech: 54 PhD: 7

Degrees Awarded BTech: 41 MTech: 36

FACULTY STRENGTH

The Department has twenty faculty members ason 31 M arch 2007.

Professor: 7 Associate Professor: 7 Assistant Professor: 6

MAJOR EQUIPMENT AND FACILITIES

The Department has excellent compu ti ng facilities as well as various laboratories with state-of-the-art technical eq uipment. They are mainly :

Advanced Manufacturing Laboratory

Strength of Materials Laboratory

Materials Science Laboratory

Fluid Mechanics Laboratory

Thermal Sci ence Laboratory

Turbo-machinery Laboratory

IC Engine Laboratory

Vibrations and Acoustics Laboratory

Mechatronics and Robotics Laboratory

Instrumentation Laboratory

Theory of Machines Laboratory

Tribology Laboratory

CAD/CAM Laboratory

RESEARCH AND DEVElOPMENT ACTIVITIES

Faculty members are actively engaged in research. The number of publications in reputed journals is increasing year by year. A number of sponsored research and consultancy projects are being investigated in the Department. The major research areas are fluid mechanics, thermal science, design, manufactu ring and material science. The faculty members are exp loring newer areas like micro-manufacturing, magnetic bearings, smart structures and nano-fluid mechanics.

101

Page 2: DEPARTMENT OF MECHANICAL ENGINEERING › pro › sites › default › files › AR_06-07_w-05.pdfProcessing, 20 (7), pp.1590-1614, 2006 R. Tiwari and N. Dharmaraju 'Identification

SPONSORED PROJECTS

Title: Thermal Analysis of a Graphite Heating Chamber Investigators: Prof. S.C Mishra, Dr. R. Uppaluri Sponsoring Agency: DRDL Duration: 3 years Amount Sanctioned: Rs.9.96Iakh

Title: Computer aided analysis of hi gh speed ball and roller bearings Investigator: Prof. R. Tiwari Sponsoring Agency: ARDB (Propulsion Pane!), New Delhi Duration: Completed in September 2006 Amount Sanctioned: Rs.4.5 lakh

Title: Developm ent of a new technique for experimental identification of beam crack parameters Investigator: Prof. R. Tiwari Sponsoring Agency: ARDB (Structural Panel), New Delhi Duration: 3 years Amount Sanctioned: Rs.12 lakh

Title: Investigation of Instabil ities and Nonlinear Dynamics of Advanced Heavy Water Reactor Investigator: Dr. M. Pandey Sponsoring Agency: Atomic Energy Regulatory Board Duration: 2 years . Amount Sanctioned: Rs.3.96 lakh

Title: Setting up of Technical Backup Unit (TBU) at liT Guwahati for R&D Interface with Khadi and Village Industries Sector Investigators: Dr. U.K. Saha, Dr. P. Mahanta, Mr. R.M. Punekar, Mr. AK Das, Dr. AK. Sarma, Dr. A D. Saharabudhe, Dr. S.K. Kakoty, Dr. D. Maity, Dr. D. Chakraborti Sponsoring Agency: KVIC Duration: 5 years Amount Sanctioned: Rs.42.44Iakh

Title: Development of Twin Roll Casting Technique for manufacturing Thin Casti ngs Investigator: Dr. P.S. Robi Sponsoring Agency: DST Duration: 3 years 8 months Amount Sanctioned: Rs.11 lakh

Title: Estimation of Earth Radiation Budget Investigator: Dr. S.C Mishra Sponsoring Agency: DoS Duration: 3 years Amount Sanctioned: Rs.13.16 lakh

Title: Setting up Rural Tech nology Action Group - North East (RuTAG-NE) Investigator: Dr. S. Kakoty Sponsoring Agency: DST Duration: 2 years Amount Sanctioned: Rs.43 lakh

102

Title: Optimum Design of Laminated FRP Composite Structures Investigators: Dr. D. Chakraborty Sponsoring Agency: MHRD Duration: 2 years Amount Sanctioned: Rs.8 lakh

Title: Optimization of Laminated Fibre Reinforced Plastic Composites on Parallel Platform Investigators: Dr. D. Chakraborty Sponsoring Agency: DST Duration: 2 years Amount Sanctioned: Rs. 1 0.3 lakh

CONSULTANCY PROJECTS

Title: Experimental Estimation of Rotor Dynamic Coefficients of Seals Consultant: Dr. R. Tiwari Duration: Up to December 2007 Sponsoring Agency: ISRO, Trivendrum

Title: Design and Development of First Generation Tapered Roller Bearings Consultant: Dr. R. Tiwari Duration: 2 years Sponsoring Agency: Tata Bearings, Kharagpur

Title: Consultancy and Technical Design of the Slit-Type Angu lar Contact Ball Bearings for LCA applications. Consultant: Dr. R. Tiwari Duration: 1 year 6 months Sponsoring Agency: CVRDE, Chennai

Title: Technical Assessment of the Wind Turbine-cum-Water Pump System Developed by M ehtar Hussain Consultants: Dr. U.K. Saha, Dr. P. Mahata, Dr. S.K. Dwivedy and Mr. P. Kalita Duration: 3 months Sponsoring Agency: GIAN-NE

PUBLICATIONS

journal

N. Gupta, G.R. Chaitanya and S.C Mish ra 'Lattice Boltzmann method applied to variable thermal conductivity conduction and radiation problems', Journal of Thermophysics and Heat Transfer, 20 (4), pp. 895-902, October-December 2006

P. Mahanta, S.C Mishra and Y. Kushwah 'An experimental study of pongamia pin nata L. oil as a diesel substitute', Proc. IMechE, International Journal of Power and Energy, 220, Part A, 2006

N. Anand and S.C Mishra 'The discrete transfer method applied to the radiative heat transfer in a variable refractive index semitransparent

Indian Institute of Technology Guwahati

Page 3: DEPARTMENT OF MECHANICAL ENGINEERING › pro › sites › default › files › AR_06-07_w-05.pdfProcessing, 20 (7), pp.1590-1614, 2006 R. Tiwari and N. Dharmaraju 'Identification

m ed i u m', Jou mal of Quantita tive Spectroscopy and Radiative Transfer, 102, pp. 432-440, Decem ber 2006

s.c. Mishra, H.K. Roy and N. Mishra 'Discrete ordinate method with a new and a simple quadrature scheme', Journal of Quantitative Spectroscopy and Radiative Transfer, 101 (2), pp. 249-262, September 2006

S.c. Mishra, P. Chug, P. Kumar and K. Mitra 'Development and comparison ofthe DTM, the DOM and the FVM formulations for the short-pulse laser transport through a partidpating medium', International Journal of Heat and Mass Transfer, 49 (11-12), pp. 1820-1832, june 2006

S.c. Mishra, M. Stevan, S. Nemoda, P. Talukdar, D. Trimis and F. Durst 'Heat transfer analysis of a two-dimensional rectangular porous burner', Int. Communications in Heat and Mass Transfer, 33, pp. 467-474, April 2006

A Dewan, M. Pathak and AK. Dass 'A Survey of selected literature on Improvement flow properties and computational fluid dynamics treatments of incompressible turbulent plane and round jets in quiescent ambient', Indian journal of Engineering and Materials Sciences, 13 (3), pp. 180-194, 2006

M. Pathak, A Dewan and A.K. Dass 'Computational Prediction of a slightly heated turbulent rectangu lar jet discharged into a narrow channel crossfiow using two different turbulence models', International Journal of Heat and Mass Transfer, 49 (21-22), pp. 3914-3928, 2006

R. Tiwari and N. Dhawade 'Localisation and Criticality of a Crack in an Euler-Benaulli Beam Based on Modal Characteristics', Advances in Vibration Engineering, 5 (3), pp. 175-189,2006

R. Tiwari, N. Dharmaraju and S. Talukdar 'Identification of an Open Crack Model Parameters in a Cracked Beams', Advances in Vibration Engineering, 5 (4), A Special Issue on Rotor Dynamics, 2006

R. Tiwari and V. Chakravarthy 'Simultaneous Identification of Residual Unbalances and Beari ng Dynamic Parameters from Impulse Responses of Rotor-Bearing Systems', Mechanical Systems and Signal Processing, 20 (7), pp.1590-1614, 2006

R. Tiwari and N. Dharmaraju 'Identification of an Open Crack Model in a Beam Based on a Novel Hybrid Reduction Scheme', Mechanical Systems and Signal Processing, 20 (8), pp. 2148-2170,2006

B.R. Rao and R. Tiwari 'Optimum Design of Rolling Element Bearings Using Genetic Algorithms', Mechanism and Mach ine Theory, 42 (2), pp. 233-250,2006

Annual Report 2006-2007

M. Karthikeyan, R. Tiwari and S. Talukdar 'Crack Localization and Sizing in a Beam Based on the Free and Forced Response Measurements', Mechanical Systems and Signal Processing, 21 (3), pp. 1362-1385, 2006

S. Senthilvelan and R. Gnanamoorthy 'Fiber Reinforcement in Injection Molded Spur Gears', Applied Composite Materials, 13 (4), pp. 237-248, 2006

S. Deb, K. Ghosh, S. Paul 'A Neural Network based Methodology for Selection of Machining Operations in Computer-Aided Process Pl anning for Rotationally Symmetrical Parts', Journal of Intelligent Manufacturing, 17, pp. 573-585, 2006

P. R. Kanna and M.K. Das 'Heat Transfer Study of Two-Dimensional Laminar Incompressible Wall jet over Backward-Facing Step', Numerical Heat Transfer, Part A, 50 (2), pp. 165-187, 2006

A. Dalal and M. K. Das 'Natural Convection in a Cavity with a Wavy Wall Heated from Below and Uniformly Cooled from the Top and Both Sides', ASME Transaction: Journal of Heat Transfer, 128 (7), pp. 717-725,2006

P.R. Kanna and M.K. Das 'Conjugate Heat Transfer Study of Backward-Facing Step Flow - a Benchmark Problem', International Journal of Heat and Mass Transfer, 49 (21-22), pp. 3929-3941, 2006

P.R. Kanna and M.K. Das 'Numerical Simulation of Two-Dimensional Laminar Incompressible Wall jet Flow over Backward-facing step flows', ASME Transaction: Journal of Fluids Engineering, 128,pp. 1023-1035, 2006

M.K. Das and K.S.K. Reddy 'Conjugate Natural Convection Heat Transfer in an Inclined Square Cavity containing a Conducting Block' , International Journal of Heat and Mass Transfer, 49, pp. 4987-5000,2006

P.R. Kanna and M.K. Das 'Conjugate Heat Transfer Study of Two-Dimensional Laminar Incompressible Wall jet over Backward-Faci ng Step', ASME Transaction: Journal of Heat Transfer, 129 (2), pp. 220-231, 2007

N. Sahoo, D. R. Mahapatra, G. jagadeesh, S. Gopalakrishnan and K.P.j. Reddy 'Design and analysis of a flat accelerometer based force balance for shock tunnel testing', Measurement, 40, pp. 93-106,2007

103

Page 4: DEPARTMENT OF MECHANICAL ENGINEERING › pro › sites › default › files › AR_06-07_w-05.pdfProcessing, 20 (7), pp.1590-1614, 2006 R. Tiwari and N. Dharmaraju 'Identification

N. Sahoo, S. Saravanan, G. Jagadeesh and K.P.J. Reddy 'Simultaneous measurement of aerodynamic and heat transfer data for large angle blunt cones in hypersonic shock tunnel', Academy Proceedings in Engineering Sciences, SADHANA, 31 (5), pp. 557-581 2006

M. Pathak, A Dewan and A K. Dass 'Effect of Streamli ne Curvature on Flow Field of a Turbulent Plane Jet in Cross flow', Mechanics Research communications, 34 (3), pp. 241-248, 2007

A. Dewan, V. Buwa and F. Durst 'Performance Optimizations of a Grid Disc Impeller for Mixing of Single-Phase Flows in a Stirred Vessel', Trans. IChemE, Part A, Chemical Engineering Research and Design, 84 (A8), pp. 691-702, 2006

N. Sahiti, F. Durst and A Dewan 'Strategy for Selection of Elements for Heat Transfer Enhancement', Intemational Journal of Heat and Mass Transfer, 49 (19-20), pp. 3392-3400, 2006

P. Mahanta, U.K. Saha, A. Dewan, P. Ka lita and B. Buragohain 'Biogas Digester: A Discussion on Factors Affecting Biogas Production and Field Investigation of a Novel Duplex Digester', Journal of the Solar Energy Society of Ind ia, 15 (2), pp. 1-12,2006

A Garg, P.S. Sastry, M. Pandey, U.S. Dixit and S.K. Gupta 'Numerical Simu lation and Artificial Neu ral Network Modelling of Natural Circulation Boiling Water Reactor', Nuclear Engineering and Design, 237 (3), pp. 230-239, 2007

M.J. Rajkumar and U.K. Saha 'Valve Aided Twisted Savonius Rotor', Journal of Wind Engineering, 30 (3), pp. 243-253, 2006

N.R. Abburi and U.S. Dixit 'A knowledge-based system for the prediction of surface roughness in turning process', Robotics and ClM, 22 (4), pp. 363-372, 2006

U.S. Dixit, R. Ku mar and S.K. Dwivedy 'Shape optimization of flexible robotic manipulators', ASME Journal of Mechanical Design, 128, pp. 559-565, 2006

S.K. Gunjal and U.S. Dixit 'Vibration analysis of shape-optimized rotating cantil ever beams', Engineering Optimization, 39 (1), pp. 5-1 23, 2007

K. Dwivedy and P. Eberhard 'Dynamic analysis of flexible manipulators', Mechanisms and Machine Theory, 41, pp. 749-777, 2006

Conference Proceedings (International)

S.S. Babu, G. Saravana Kumar 'Unstructured Mesh Generation using an Hybrid Advancing Front Technique', 2nd Internationa l Congress on

104

Compu tational M echanics and Simulation, liT Guwahati, India, 9-10 December 2006

R. M eena, G. Saravana Kumar, A D. Shasrabudhe 'Feature Based M odelling, Analysis and Design of Axial Fan Impeller', Intern ational Conference on Global Manufacturing and Innovation, Coimbatore, India, 27-29 July 2006

B. M andai and S.c. Mishra 'Analysis of 1-0 transient conduction and radiation heat transfer using the variable relaxation time lattice Boltzmann method and the fini te volum e method', 13th International Heat Transfer Conference, Sydney, NSW, Australia, 13-1 8 Au gust 2006

N. Kumar, J.c. Kalita and A.K. Dass 'HOC computation of two-sided lid-driven cavity flow', Proceed in gs o f the 2nd In tern ational Conference on Computational M echanics and Simulations (ICCM-06), liT Guwahati , 1695-1700, 8-10 December 2006

A Peru mal and A.K. Dass ' Incompressible viscous flow simulation in the lid-driven cavity by Lattice Boltzmann Method', CD Proceedings of the 2nd Intern ational Confere nce on Computation al M echanics and Simulations (ICCM- 06), liT Guwahati, 8-10 December 2006

T.K. Mishra, AK. Dass, M . Pandey and N. Suresh Kum ar 'A multigrid-accelerated 3D incompressib le transient Navier­Stokes solver', Proceedings of the 33,d National and 3,d In ternational Conference on Fluid Mechanics and Flu id Power, liT Bombay, ICFMFP-2006, 1413, 7-9 December 2006

A Dewan, M . Pathak and AK. Dass 'Heated turbu lent rectangu lar jet discharged into a narrow chann el cross f low', Proceed ings of Internation al Conference on Recent Advances in Heat Transfer, Coim batore, India, pp. 73-83,2006

M . Pathak, A Dewan and A K. Dass 'Computational Fluid Dynamics of flow field of a heated turbulent pl ane jet in cross-flow using Reynolds-stress Transport M odel', Proceedings of the 18th National and 7th

ISHMT-ASME Heat and M ass Transfer Conference, Guwahati, India, 2006

A Dewan, V. Garde, M. Kumar and AK. Dass ' Fl ow topology in cubical and sqare lid -driven caviti es' , Proceed in gs of the 18th National and 7th ISHMT-ASME Heat and M ass Transfer Conference, Guwahati, India (Paper No. HMT-2006-C1 20), 2006

A Dewan, M . Path ak, A.K. Dass and P. Sardar 'Prediction of turbulent round jet in a co-flowi ng ambient using the k-J model of turbu lence', Proceedings ofthe 18th

National and 7th ISHMT-ASM E Heat and Mass Transfer Conference, Guwahati, India (Paper No. HMT -2006-C01 9), 2006

Indian I ns~i tu te of Technology Guwahati

Page 5: DEPARTMENT OF MECHANICAL ENGINEERING › pro › sites › default › files › AR_06-07_w-05.pdfProcessing, 20 (7), pp.1590-1614, 2006 R. Tiwari and N. Dharmaraju 'Identification

J.S. Rao and R. Tiwari ' Design Optimization of Thrust M agnetic Beari ngs using Genetic Algori thms'. IFToMM 7th International Conference on Rotor Dynamics, Vienna, Austria, 25-28 September 2006

J.S. Rao and R. Tiwari 'O ptimum Design ofThree Pole Radial M agnetic Bearings using Genetic Algorithms', Proceedings of 2nd International Congress on Computer M echanics and Simulation (lCMMS-06), liT Guwahati , India, 8-10 December 2006

S. Ch ekuri and R. Tiwari ' Identification of Speed Dependent Bearing Parameters Using Experimental Vibration Data' , Proceedings of 2nd In tern ation al Congress on Computer M echani cs and Simulation (lCMMS-06), liT Guwahati, India, 8-10 December 2006

P.V.V.N. Prasad and R. Tiwari ' Effect of Contoured Profi le on Contact Stresses of the Cylindrical Roller', Proceedings of 2nd International Congress on Computer M echanics and Simulation (ICMMS-06), liT Guwahati, India, 8-10 December 2006

H. Bh omick, R. Tiwari and G. Ch oudhary 'Q uasi- stati c Analysis of Tapered Roll er Bearin gs and Comparison of Bearing Lives for Different Roll er Surface Profil es', Proceedi ngs of 2nd In tern ational Congress on Computer Mechanics and Simulation (ICMMS-06), liT Guwahati, India, 8-10 Decem ber 2006

R. Tiwari 'A Brief History of Rotor Dynamics and Recent Trends', Proceedi ngs of 51 th Congress of the Indian Society of Theoretical and Applied M echanics (ISTAM-2006), An Intern ational M eet, Coll ege of En gin eerin g, Andh ra University, Visakhapatanam, India (Invited Lecture), 18-2 1 December 2006

E, Vishnuva rdhanarao and M .K. Das 'Mixed Convection Flow in a Two-Sided Li d-Driven Cavity Fill ed Wi th a Fluid-Saturated Porous M edium', 2nd

International Congress on Computational M echanics and Simulation, liT Guwahati, India, 8-10 December 2006

Y. Srinivas, S.K. Dwivedy and N. Sahoo 'Flow induced vibration in penstock of a hydraulic power plant', Proceed ings of Second International Congress on Computati onal M echani cs and Simulation (lCCMS-06) , liT Guwahati, India, 8-1 0 December 2006

N. Sahoo ' Im portance of fl uid-structure in teraction in hypersonic fl ow environment', Proceed ings of Second International Congress on Computational Mechanics and Simulation (lCCMS-06), lIT Guwahati , India, 8-10 December 2006

Annual Report 2006-2007

K.P.J. Reddy, G. Jagadeesh, V. M enezes and N. Sahoo ' Expe rim ental i nvesti gat io ns of aerodynamic drag management for hypersonic vehi cle configurations', Proceedin gs o f th e El eventh Asian Congress of Fluid M echani cs, Kuala Lumpur, M alaysia, 22-25 M ay 2006

A. Dewan, Lakshmikanth and S. Maurya ' Prediction ofTurbulent Round Jet in a Coflowing Am bient Using DifferentTurbulence M odels', Proc. 2nd International Congress on Computati onal M echani cs and Simulation, Guwahati, India (10 K. In tern ational), pp. 1289-1295, 2006

. M.K. Jh a, R. Swarnkar, A. Dewan, P.K. Jha and V. Bu wa 'An Assessment o f Di ffe ren t Turbulence Models fo r Pred icti on of Single-Phase Flow in a Stirred Vesse l', Proc. 2nd Intern ational Congress on Compu tational M echanics and Simulation, Guwahati, India (I.K. International), pp. 1296-1302,2006

A. Dewan, L.A. Reddy and K.S. Chandra ' Predicti on o f Lamin ar-Turbul ent Transit ion Usin g k-~ Turbul ence M odel', Proc. 2nd In ternational Congress on Computational M echanics and Simulation, Guwahati, India (I .K. Internati onal), pp. 1303-1309, 2006

P.S. Rao, P.K. Jha and A. Dewan 'Num erical Modelling of Inclusion Separati on Process in Continuous Casting Tun dish' , Proc. 2nd In tern ational Congress on Computational M echani cs and Simulation, Guwahati, India (I .K. International), pp. 1053-1058,2006

L. Dayanand and A. Dewan 'Num erical Investigation of HeatTransfer and Pressure Drop in a Three-Dim ensional Rectangular Duct with Ci rcular Pin Fin Cross Sections', Proc. 2nd Intern ati onal Congress on Computational M echanics and Sim ulation, Guwahati, India, 2006

U. M adhavakrishna, P. M uthukumar, A. Dewan 'Numerical Investigation of Coupled Heat and M ass Transfer in M etal Hydride Based Hyd rogen Storage Device', Proc. 2nd Intern ational Congress on Computational Mechanics and Simulation, Gu wahati, India, 2006

C. Naveen Kum ar, M . Pandey 'Stabil ity analysis of supercritical water-cooled reactor', Proc. 2nd International Congress on Computational M echanics and Simulation, Guwahati , India, 2006

G. Gopa Kishor, A. Garg, f0 . Pandey, U. S. Dixit ' Design Optimization of Prim ary Heat Transport Loop of Natural Circul ation Boili ng W ater Reactor', Proc. 2nd In ternational Congress on Computational Mechanics and Simulation, Guwahati, India, 2006

M . Swetha, M . Pandey, U.S. Dixit ' Numeri cal Simulations of Pul sating Heat Pipe', Proc. 2nd In ternational Congress on Computational Mechanics and Simulation, Guwahati , India, 2006

105

Page 6: DEPARTMENT OF MECHANICAL ENGINEERING › pro › sites › default › files › AR_06-07_w-05.pdfProcessing, 20 (7), pp.1590-1614, 2006 R. Tiwari and N. Dharmaraju 'Identification

T.K. Mishra, A.K. Dass, M. Pandey, N. Suresh Kum ar 'A multigrid accelerated 3D incompressible transient Navier­Stokes solver', 33 rd National and 3rd Int. Conf. Fluid M echani cs Fluid Power (NCFMFP2006), Mumbai, India, 2006

S.N. Chouskey and K.S.R.K. Murthy ' Perform ance of the Superconvergent Patch Recovery technique in Qu ad ratic triangular element meshes', Proceedings of the Second Intern ational Conference on Computational Mechani cs and Simulations, liT Cuwahati, pp. 977-983, 2006

S.c. Mishra and R. Sin gh 'A new concept of adaptive selection of intensity directions in the DOM of radiative transfer in participating media', Intern ation al Conference on Advances in M echanical En gineerin g, Fatehgrah Saheb, Punj ab (Keynote paper) 1-3 December 2006

M. Kumaran and s.c. Mishra Analysis of a short-pulse laser irradiation on a pl anar in homogeneous participatin g medium using th e finite vol ume method', In ternational Congress on Computational Mechanicsand Simulation (lCCMS-06), IITCuwahati,8-10 December 2006

R. Singh and s.c. Mishra 'Analysis of radi ative heat transfer in a planar participating med ium subjected to diffuse and/or collimated rad iation -A comparison of th e DTM, the DOM and the FVM', International Congress on Computational M echanics and Simulation (lCCMS-06), liT Cuwahati, 8-10 December 2006

R. Singh and s.c. Mishra 'A new quadrature scheme for the DOM and the FVM', In ternational Congress on Computational M echanics and Simulation (lCCMS-06), liT Cuwahati, 8-10 December 2006

B. Mondal and s.c. Mishra 'Appli cation of variab le relaxati on time latti ce Boltzmann method in 2-D transi ent conduction and radiation heat transfer problems', International Congress on Computational Mechanics and Simulation (lCCMS-06), liT Cuwahati, 8-1 0 December 2006

P.K. Panigrahy, U.K. Saha, D. Maity, S. Sharm a 'Wall Pressures on a Square Tank due to Liquid Sloshing', CD-ROM Proceedings of 3rd International (and 33rd National) Conference on Fluid Mechanics and Fluid Power, liT Bombay, India, 7-9 December 2006

U.K. Saha, S. Thotla and K.V. Reddy 'Wind Tunnel Tests of Two-stage Savonius Rotor with Semicircular and Twisted Blades', CD-ROM Proc. of World Renewable Energy Congress IX and Exhibition, Florence, Italy, 19-25 August 2006

S. Carg, D. Chakraborty, S. Deb, S.K. Pal 'A neuro-memetic model for the prediction of drill flank wear', Proceedings of the International Conference on

106

Advances in M anufacturing and Technology M anagement, Mumbai, India, pp. 9-15, january 2007

A.D. Sahasrabudhe, MA Reddy and S. Singh 'The effect of speed and traffic volum e on noise levels in a city', 8th Intern ational symposium on transport noise and vibration, St. Petersburg, 4-6 june 2006

V.N. Deshpande and A.D. Sahasrabudhe 'Vibration analysis of rotating tapered thin walled composite cantilever beams including gryroscopic coupling', Second International Conference on Computational Mechanics and Simulation, liT Cuwahati, 8-10 December 2006

T. Banerj ee and S.K. Dwivedy 'Fatigue and residual strength degradation model for Ti6-AI4-V stem for hip prosthesis', Second International Congress on Computational M echanics and Simulation, liT Cuwahati, 8-10 December 2006

N. M ahendra, K.C. Sahu and S.K. Dwivedy 'Parametric instability regions of sandwich beams with various softcore and skin materi als using higher order theory', Second Intern ational Congress on Computational M echanics and Simulation, liT Cuwahati, 8-10 December 2006

B. Pratih er and S.K Dwivedy ' Parametri c instability of a cantil ever beam with magnetic fi eld abd axial load', Second International Congress on Computational M echanics and Simulation, liT Cuwahati, 8-10 December 2006

Conference Proceedings (National)

V.K. Pantangi and s.c. Mishra 'Combustion of gaseous hyd rocarbon fuels within porous med ia', Nati onal Conference on Advances in En ergy Research, liT Bombay, 4-5 December 2006

M. Sh arma and s.c. Mishra 'A review of porous media combustion', 59 th Annual Session of Indian Chemical Engineering Congress, Ankaleshwar, Cujarat, 27-30 December 2006

A. S.S. R. Kumar, V.K. Pantangi, S.c. Mishra and N. Sahoo 'Comparison of thermal efficiencies of cooking stoves based on free flame and porous media combustion', 22 nd

National Convention of Mechanical Engineers: Energy Technologies- Strategies for Optimal Utilization of Natural Resources, Cuwahati, 9-10 September 2006

L. Dayanand and A. Dewan 'Computati onal Analysis of Fluid and Thermal Behaviour in Design of a Compact Heat Exchanger', Proc. of Conference on Design through Engineering Analysis of Mechanical Systems, john F. Welch Technology Centre, C.E., Bangalore, 2007

M. Sivasankar, T. Banarjee, N. Ravikiran, D Chakraborty S.K Dwivedy

Indian Institute of Technology Guwahati

Page 7: DEPARTMENT OF MECHANICAL ENGINEERING › pro › sites › default › files › AR_06-07_w-05.pdfProcessing, 20 (7), pp.1590-1614, 2006 R. Tiwari and N. Dharmaraju 'Identification

' Dynamic stress and fatigue analysis of arti ficial hip prosthesis', National Conference on Biomechanics, Bengal Engineering and Science University, Shibpur, 15-17 December 2006

Other Publications (Books, Chapters, etc.)

R. Tiwari and S.K. Dwivedy is currently developing a Web­Based and Video-Based Course on Engineering Vibrations, under the National Program ofTechnical Education Learning (NPTEL) sponsored by All India Council of Technical Education (AICTE).

U.S. Dixit is currently developing a Web-Based and Video­Based Course on Engineering M echanics, under the National Program ofTechnical Education Learning (NPTEL) sponsored by All India Council ofTechnical Education (AICTE).

U.S. Dixit is developing lecture notes on Finite Element Methods in Engineering, sponsored by QIP. G. Saravana Kumar is currently developing a Video-Based Course on Engineering Mechanics, under the National Program ofTechnical Education Learning (N PTEL) sponsored by All India Counci l ofTechnical Education (AICTE).

R. Tiwari was Guest Ed itor for a special issue on Rotor Dynamics in an International Journal on Advances in Vibration Engineering, 5 (4), 2006 (Collection of 9 papers)

N. Sahoo has developed a course 'Fluid M echanics' under NPTEL (National Program on Techn ology Enhanced Learningl, CET at liT Guwahati.

U.K. Saha is developing a course material on Th eory of Gas Turbines consisting of 30 lectures (approx. 800 power-point slides).

CONFERENCES/WORKSHOPS/SYMPOSIAATTENDED

International Conference

R. Tiwari attended 7th Intern ational Con ference on Rotor Dynamics, Vienna, Austria, 25-28 September 2006.

M. Pandey attended Second Intern ational Congress on Computational Mechanics and Simu lation (lCCMS-06), liT Guwahati, Guwahati, India, 8-10 December 2006.

G. Saravana Kumar attended Second International Congress on Computational Mechanicsand Simulation (lCCMS-06), liT Guwahati, Guwahati, India, 8-10 December 2006.

G. Saravana Kumar attended International Workshop on MEMS and Micro/Nano Systems Technology for Bio- Implants and Bio Applications by Indo US S& T Forum at liT Kharagpur in December 2006.

An nual Report 2006-2007

K.S.R.K. Murthy attended Second International Conference on Computational Mechanics and Simulations held at liT Guwahati in December 2006.

U.K. Saha attended PLMSS-2006 Pre-Conference Workshop on AIRCRAFT DESIGN by Daniel P. Raym er held at NAL, Bangalore during 14-1 6 December 2006.

U.K. Saha and P. Mahanta attended a workshop on Role of Partitionin g and Transmutation in the Mitigation of the Potential Environmental Im pacts of Nuclear Fuel Cycle held at the Abdus Salam International Centre for Theoretical Physics, Tri este, Italy duri ng 20-24 November 2006.

U.K. Saha attended the 9th Worl d Renewable Energy Congress and Exhibi tion, held at University of Florence, Florence, Italy during 19-25 August 2006.

S.C Mishra participated and presented a paper entitled 'Analysis of 1-D transient conduction and radiation heat transfer using the variable relaxation time lattice Boltzmann method and the finite volum e method ' at the 13th

International Heat Transfer Conference, 13-1 8 August 2006.

National Conference

M. Pandey attended 21't Ind ian Engin eeri ng Congress, Guwahati, 21-24 December 2006.

M. Pandey attended 17th Annual Conference of Indian Nuclear Society (INSAC-2006), Mumbai, 21-24 November 2006.

S. K. Dwivedy attend ed Nati onal conference on Biomechanics, Bengal Engineering and Science University, Shibpur, 15-17 December 2006.

INVITED lECTURES OF OUR FACULTY

S.c. Mishra delivered the following invited talks:

1) 'Interaction of a Short-Pulse Radiation with a Participating M edium', College of Engineering, Pune, February 2007

2) 'Application of the Lattice Boltzmann M ethod in Solving Heat transfer Problems involving Th erm al Radiation' and ' Interaction of a Short-Pulse Radiation with a Participating Medium' at Fluent India Pvt. Ltd, Pun e, February 2007

3) Six lectu res on Advances in Heat Transfer in a 2-day TEQI P - Workshop on Advances in Heat Transfer, NIT Jamshedpur, December 2006

4) 'A new concept of Adaptive Selection of In tensity Directions in th e Discrete Ordinates M ethod of Radiative Transfer in Parti cipating M edia', International Conference on Advances in M echanical Engineering, Baba Banda Bahadur

107

Page 8: DEPARTMENT OF MECHANICAL ENGINEERING › pro › sites › default › files › AR_06-07_w-05.pdfProcessing, 20 (7), pp.1590-1614, 2006 R. Tiwari and N. Dharmaraju 'Identification

Engineering Coll ege, Fatehgrah Sahib, Punjab, December 2006

5) 'Characterization of a Medium using a Sh ort-Pulse Laser' at Tezpur University, Assam in December 2006, at IISc Bangalore in November 2006, at liT Delh i in November 2006, at NTU Singapore in August 2006, at Bhagalpur Engi neering Coll ege, Bh agalpur, Bihar in April 2006 and at NIT Trichi, January 2007

6) 'Porous Medium Burner for Cheap and Environm entally Clean Clean Cooking on LPG Stoves' at JNTU Hyderabad in M ay 2006

7) 'Rad iative Transfer M ethods in the An alysis of Heat Transfer Problems' at Defense Research Developm ent Laboratory (DRDL), Hyderabad in M ay 2006

S. Senthilvelan delivered the following invited talks on -

1) 'Design Considerations for the Composite Products - A Case Study' for Sh ort-Term Course on Industrial Design Conside rati ons in Deve lop ment of Pl ast ic Products Organised by Department of Design, Indian Insti tute of Technology Guwahati, 11-15 Septem ber 2006

2) 'Pl astic part design and manufacturin g' for Sh ort-Term Cou rse on Rap id Prod uct Development Organi sed by M echanical En gineering Department, Indian Institute of Technology Guwahati, 11-1 5 December 2006

G. Saravana Kum ar delivered an invited lecture on 'Reverse Engineering appli cation and theory' for short-term training programme on CAE in M achine Design at liT M adras, 5-1 6 June 2006

R. Tiwari delivered fol lowing invited ta lks:

1) 'Estimation of Rotordynamic Parameters in Steam Turbine Seals' to Skoda Power, Prague, Czech Republic, 22 September 2006

2) 'Optimum Design of Magnetic Tru st Bearing based on Genetic Algorithms', IGCAR, Kalpakkam, 30 October 2006

3) 'Distance Learn ing Technologies in Education', IGNOU Sponsored Workshop on the Distance Mode ofTeaching at Department of Management and Business Admi nistration, Gauhati University, 23 January 2007

4) 'New Horizons in Edu cational Technology ', UGC Sponsored Workshop on the Mass Communications at Academic Staff College, Gauhati University, 27 February 2007

S. Deb delivered the following invited lectures:

1) 'Artifi cial Intelligence (AI) Appli cations in Manufacturing' for the AICTE sponsored Short-Term Course on Advanced Manufacturing Processes organised by Department of Mechanical Engineering, Motilal Nehru National Institute ofTechnology, Allahabad, India, March 2007

108

2) ~dvances in Microforming' for AICTE sponsored Short­Term Course on Advanced Manu facturing Processes organised by Department of Mechanical Engineering, Motilal Nehru National Institute of Technology, Allahabad, India, M arch 2007

3) 'Computer-Aided Process Pl ann ing', for QIP Short-Term Course on Rapid Produ ct Development organi sed by Department of M echanical En gineering, Indian Institute of Technology Guwahati , India, December 2006

U.S. Dixit delivered the invi ted lecture on 'M echatronics and Concurrent En gineerin g' in QIP sponsored cou rse on Rapid Product Developm ent, 12 December 2006

A. Dewan delivered an invited lecture 'Heated Turbulent Rectangular Jet Discharged in to a Narrow Channel Fl ow' in In tern ational Conference on Recent Advances in Heat Transfer, September 2006, at Karunya Institute ofTechnology and Sciences Coimbatore India

M . Pandey delivered an invited lecture on 'Lumped Modeling Approach for Stability Analysis of Supercri tical Water Cooled Reactor' in 17th Annual Conference of Indian Nuclear Society (lNSAC-2006), Mum bai, India, 21-24 November 2006

SHORT-TERM COURSES ORGANISED

G. Saravana Kum ar organised a QIP Sh ort-Term Course on Rap id Produ ct Development, at liT Gu wahati, 11-15 December 2006 .

SEMINERS/CONFERENCES/WORKSHOPS/SYMPOSIA ORGANISED

S.K. Dwivedy and D. M aity (Civil En gineeri ng Departm ent) organised th e 2nd Intern ational Congress on Computational Mechanics and Simulation at liT Guwahati in 8-10 December 2006.

GUEST LECTURES DELIVERED IN THE DEPARTMENT

Prof. T. Sun da rarajan, Depar tment of M echani cal Engin eering, l iT Madras on ' Num eri ca l mode lin g of combustion process' on 13 June 2006

Dr. Dipes Chakrabarty, Kolkata on ' Fluid now and heat transfer characteristi cs from various shaped bluff bodies placed inside a wind tunn el' on 5 September 2006

Prof. P.K. Sen, Head, Appl ied M echanics, liT Delhi

Prof. Padma Vasudevan Sen, Centre for Rural Development and Technol ogy, liT Delhi on 'Appropri ate tech nology, environment and rural development' on 10 November 2006

Prof. Matthies Herm an, Head, Institute of Scientific Computing, Technical University Branunswick, Germany on

Ind ian Institute of Technology Guwahati

Page 9: DEPARTMENT OF MECHANICAL ENGINEERING › pro › sites › default › files › AR_06-07_w-05.pdfProcessing, 20 (7), pp.1590-1614, 2006 R. Tiwari and N. Dharmaraju 'Identification

' Fluid structure interaction' and 'Offshore wind turbine' on 12 December 2006

Prof. V. Ganesan Departm ent of M echanical Engineering, liT M ad ras on ' Promising gaseous fu els for automotive application',22 December 2006

Mr. Yitzchak Yifrach, Senior Lecturer, M echanci al Engin ee ring, ORT Braud e College, 'Aca d emic programmes at ORT Braude Israel', 27 December 2006

Dr. B.C. Pai, Depu ty Director, RRL Trivandrum on 'Research activities at RRL Trivandrum', 8 January 2007

Dr. A. Rajamani, Bharat Heavy El ectricals Limited Hyd erabad on ' Fl ow induced vibration estim ation and design guidelines', 6 Febru ary 2007

Prof. V.K. Jai n, Departm ent of M echanica l Engin eering, liT Kanpur on 'Advanced manufacturing', 11 February 2007

Mr. H. Siddesha (Scientist-G) and Mr. Aishwarjya Gogoi (Scientist-E) Aeronautical Development Agency (ADA), Bangalore on 'Research activiti es at ADA Bangalore', 6 M arch 2007

AWARDS AND HONOURS

N. Sahoo has been awarded DST funded BOYSCAST Fellow 2006-2007. Research is to be carried out at Centre for Hypersoni cs, University of Qu eensland, Brisbane, Australia.

SPECIAL MENTION

A. Dewan is th e m emb er of N ation al O rganizing Committee, Seventh Asi an CFD Conference, Bangalore, to be held on November 2007.

M. Pand ey has been appointed as Associate Editor of Science and Technology of Nuclea r Installations, an international jou rn al published by Hindawi Publishing Corporation, USA.

U.S. Dixit has been invited to serve in the editori al board of the followingjournals: Int. J. of Mechatronics and Man ufacturing Systems, Inderscience publication Int . J. of Engineering Stud ies, Research Indi a Publications Jo urnal of manufacturing Enginee ring, Society for Manufactu rin g Engineers, India

S.c. Mishra has been appointed a member of the Board of Governors of Central Institute ofTechnology, Kokarajhar (Centrally fun ded Institute under MHRD)

Annual Report 2006-2007

FACULTY MEMBERS

D. Chakraborty PhD (lIT Kharagpur) Associate Professor Areas of Interest: FRP, Composites, FEM, Fracture Mechanics and Design

M.K. Das PhD (lIT Kanpur) Associate Professor Areas of Interest: Fluid M echanics and HeatTransfer

A.K. Dass PhD (lISc, Bangalore) Professor Areas of Interest: Computation al Fluid Dynamics and Turbom achines

S. Deb PhD (University of M ontreal, Canada) Assistant Professor Areas of Interest: Computer Integrated M anufacturing, Computer-Aid ed Process Pl annin g, W eb based Manufacturing, CAD/CAM, CNC, Intelli gent M anufacturing Systems, Applications of Artificial Intelligence and Soft Computing Techniques in M anufacturing, M anufacturing Processes, M achining Technology

A. Dewan PhD (lISc, Bangalore) Professor Areas of Interest: Computational Fluid Dynamics and Heat Transfer, Direct Numerical Simulation and Large Eddy Simulation (DNS and LES) of Fluid Turbulence, Mathematical Modelling ofTurbulent Fl ows, Fluid Dynamics and Mixing of Single-Phase Fluid in Stirred Vessels, Heat Transfer Enhancement in Heat Exchangers Buoyancy Driven Fl ows, and Biogas and other Renewable En ergy Sources

U.S. Dixit PhD (liT Kanpur) Professor and Head Areas of Interest: Design and Manufacturing, FEM, Neural Network and Fuzzy Set Application, M echatroni cs

S.K. Dwivedy PhD (liT Kh aragpur) Associate Professor Areas of Interest: Non-linear Dynamics, Design and Robotics, Vibrations

S.K. Kakoty PhD (lIT Kharagpur) Associate Professor Areas of Interest: Tribology, Duct Acoustics, M echanical System Design, Non-conventional Energy

109

Page 10: DEPARTMENT OF MECHANICAL ENGINEERING › pro › sites › default › files › AR_06-07_w-05.pdfProcessing, 20 (7), pp.1590-1614, 2006 R. Tiwari and N. Dharmaraju 'Identification

P. Mahanta PhD (lIT Guwahati) Associate Professor Areas of Interest: Th ermal Rad iation with Participating Media, Fluid ization, Energy Conservation and Renewable Energy

S.c. Mishra PhD (liT Kanpur) Professor Areas of Interest : Analysis of Heat Transfer Problems involving Thermal Radiation

K.S.R.K. Murthy PhD (lIT Kharagpur) Assistant Professor Areas of Interest: Finite Element Methods, Error Estimation and Fracture Mechanics

P. Muthukumar PhD (lIT Madras) Assistant Professor Areas of Interest: Coupled Heat and Mass Transfer Analysis, Metal Hydride Based Thermal Machines, Conventional and Non-conventional Refrigeration Systems

M. Pandey PhD (liT Kanpur) Associate Professor Areas of Interest: Dynamics and Control of Fluid-Thermal Systems, Nuclear Reactor Thermal-Hydraulics

P.S. Robi PhD (lIT Bombay) Professor Areas of Interest: Coating, Fracture Mechanics, Materials Processing, Metal Matrix Composite, Metal Casting, P/M Processing

110

U.K. Saha PhD (liT Bombay) Associ ate Professor Areas of Interest : Turbomachinary, Propulsion and Renewable Energy

A.D. Sahasrabudhe PhD (lISc, Bangalore) Professor (on deputation as Director, College of Engineering, Pun e)

Areas of Interest: Vibration and Noise, Condition Monitoring, CAD/CAM

N. Sahoo PhD (lISc, Ban galore) Assistant Professor Areas of Interest: Fluid and Thermal Engineering, Aerodyna mi cs, Gas Dynamics, Instrumentation, M easurements and Experiments in Flu id

G. Saravana Kumar PhD (liT Kanpur) Assistant Professor Areas of Interest: CAD, Computational Geometry, Rapid Product Developmen t, Soft Computing

S. Senthilvelan PhD (lIT Madras) Assistant Professor Areas of Interest: Composites, Machine El ements, Fatigue, Wear and Failure Analysis, Machine Tool Engineering, and Plastic Engineering

R. Tiwari PhD (liT Kanpur) Professor Areas of Interest: Vibrations, Rotor Dynamics, Design and Analysis of Rolling Element Bearings, Identification in Mechanical System, Active Magnetic Bearings and Random Vibrations

Indian Institute of Technology Guwahati

Page 11: DEPARTMENT OF MECHANICAL ENGINEERING › pro › sites › default › files › AR_06-07_w-05.pdfProcessing, 20 (7), pp.1590-1614, 2006 R. Tiwari and N. Dharmaraju 'Identification

DEPARTMENT OF PHYSICS

INTRODUCTION

Establish ed in 1995, th e Departm ent has achi eved considerab le progress o n all fronts. Th ese includ e strengthenin g and develop ing teaching and research laboratori es, introduction of new academic programmes, extern ally funded sponsored research and publications in leading international journals besides participating in National and Intern ational conferences and workshops. Th e Department has organized several QIPs, workshops and sci entific meetings.

ACADEMIC ACTIVITI ES

BTech programme The Department offers core, sci ence elective and open elective courses in physics for th e BTech programme. The theory courses PH1 01 and PH1 02, and a laboratory course PH11 0 are now offered as core physics courses to 1st year BTech students. Th e core courses are designed to offer an overall knowledge of physics and to train the students in experim ental techniques w ith modern equipment. Science electives are offered in th e IV th semester BTech programm e and give a somewhat deeper insight of specialised area. Th e Departm ent offers the open electives courses for Vlli th semester BTech programm e to provide the exposure to the advances in science and technology. Since 2006, a four year BTech Engineering Physics Programme is added to train bright students as engineer having fl air for physics.

MSc programme The two-year MSc programme in physi cs was started in July 2000 with an in take limit of ten students and has now expanded to a maximum intake of thirty students. This programme is designed w ith an adequate emphasis on both classroom lectu res and laboratory training along with a one­semester project work. Th e teaching laboratori es are equipped with modern instruments. The Departm ent has added two new elective courses PH536 (Quantum optics) and PH545 (General Theory of Relativitty) to MSc IVth semester students.

phD programme The Department has been offering PhD programme in physics since August 1996 in experim ental and theoretical physics. Students in this programme are trai ned through rigorous course work covering basic as well as advanced level courses before starting their research work. Currently, twenty three students are worki ng towards thei r PhD degree in areas of Experimental and Theoretical Condensed Matter Physics, Laser and Photonics, and Theoretical Physics. PhD

Annual Report 2006-2007

students also take part in teaching assistantship for BTech and MSc computing laboratory.

STUDENT INTAKE

BTech (Engineering Physics) : 17 MSc (Physics): 26 PhD: 5

FACULTY STRENGTH

Th ere are seventeen facu lty members in the Department as on 31 M arch 2007.

Professor: 2 Associate Professor: 5 Assistant Professor: 10

MAJOR EQUIPMENT AND FACILITIES

A number of faci liti es have been developed for teaching and research program mes of th e Department:

Q-switched Nd:YAG laser (20mj, nanosecond) Vibration isolation Optical table Stereo zoom Microscope Sputterin g system Cryo-Milling system 1700°C raising hearth furn ace Linux server (four in tel processors, and four 146 GB hard disc) Opti cal Fi ber Fusion Spli cer 35 mW He Ne Laser Wideband Photodetector High Precision Fiber Stage High Resolution Optical Spectrometer

RESEARCH AND DEVELOPMENT ACTIVITIES

Intense research activities are going on in the areas of Experi mental and Condensed matter physics (colossal magnetoresistance materials, defects in ionic materials, electronic structure theory, magnetic materials, nanoparticles, quantu m computation, semicwndu ctors, photovolatic materials and devices, shape-memory all oys, superconductors, etc), Laser and Photonics (fiber and integrated optics, laser matter interactions, interferometry, nanophotonics, nonlinear optics, photonic glasses, nanolithography, etc), and Theoretical Physics (higher dimensional bosonization, high-energy physics phenomenology, correlated electrons and statistical physics,

111

Page 12: DEPARTMENT OF MECHANICAL ENGINEERING › pro › sites › default › files › AR_06-07_w-05.pdfProcessing, 20 (7), pp.1590-1614, 2006 R. Tiwari and N. Dharmaraju 'Identification

string theory, etc). Recently, several new facilities have been added to the research laboratories. The facu lty members have published a number of research articles in leading National and International journals and have attended several national and international conferences/meeti ngs. The research scholars in the department also attended several schools and workshops in their respective disciplines.

SPONSORED PROJECTS

New

Title: Fabrication and Characterization of Dye-doped Polymer Waveguides and Solid State Micro-cavity Dye Lasers Investigator: Dr. S.V. Rao FundingAgency: DST Duration: 3 years Amount: Rs.9lakh

Title: Fabrication of micro- and nano-structures using femtosecond laser for photonics and micro fluidic applications Investigators: Dr. S.V. Rao (P.L) and Prof. D. Narayana Rao, University of Hyderabad (C.L) Funding Agency: DST Duration: 5 years Amount: Rs.22.65Iakh

Title: Study of Crystal Structure and magnetic properties in La0.8s.A&.,sMn03 and LaMn"XCuXO-3 by Neutron Diffraction Investigator: Dr. S. Ravi (P.L) Funding Agency: UGC-DAE Consortium for Scientific Research, Mumbai Duration: 1 year Amount: Rs.O.35 lakh

Title: Preparation and Study of Hydrogenated Microcrystalline Silicon Thin Films by Hotwire Chemical Vapor Deposition method for Solar Cell App li cations Investigator: Dr. Pratima Agarwal (P.L) Funding Agency: DST Duration: 3 years Amount: Rs.52.20 lakh

Title: Developm ent of lecture notes for the course on 'Optoelectronics' Investigator: Dr. A. Khare (P.L) Funding Agency: QIP, AICTE Duration: 3 years Amount: Rs.O.25 lakh Ongoing

Title: Development of soft magnetic Fe-Mn-Zr-B nanocrystalline alloys for high frequency applications Investigator: Dr. A. Perumal (P.L) Funding Agency: BRNS, DAE Duration: 3 years Amount: Rs.8.6 lakh

112

Title: Development of nanocrystalline (Co-Fe)-Mn-Zr-B al loys with enhanced soft magnetic properties Investigator: Dr. A. Perumal (P.L) Funding Agency: DST Duration: 3 years Amount: Rs.8.44 lakh

Title: Developm ent of lecture notes for the course on ' Physics of semiconductors' Investigator: Dr. P.K. Giri (P.L) Funding Agency: QIP, A ICTE Duration: 2 years Amount: Rs.O.25 lakh

Title: Growth and studies of em bedded GexSi,.x nanocrystals for the development of silicon-based light sources Investigator: Dr. P.K. Giri (P.L) Funding Agency: BRNS, DAE Duration: 2 years Amount: Rs.1 71akh

Title: Studies of irradiation induced defects and impurities in zinc oxide thin films Investigator: Dr. P.K. Giri FundingAgency: UGC-DAE Duration: 2 years Amount: Rs.4.5 lakh

Title: Preparation and characterization of bioactive glass­ceramics Investigators: Dr. A. Srinivasan (P.L) and Dr. P.S. Robi (C.L) Funding Agency: BRNS, DAE Duration: 2 years Amount: Rs.13. 55 lakh

Title: Dissolution of Waste Disposal Glasses in Aqueous Solutions Investigators: Dr. S.B. Santra (P.L) FundingAgency: BRNS Duration: 2 years Amount: Rs.13.06 lakh

Title: Glucose sensor based on evanescent wave induced fluorescence spectroscopy Investigator: Dr. S.K. Khijwania (P.L) FundingAgency: DAE Duration: 3 years Amount: Rs.9. 35 lakh

Title: Development of web based course on engineering physics I Faculty Coordinators : Dr. A. Khare, Dr. P. Agarwal and Dr. S. Ravi Fu nd i ng Agency: N PTEL P roj ect of M H RD Duration: 3 years Amount: Rs.5 lakh

Title: Theoretical physics seminar circuit PI/Convener (North East): Dr. S.B. Santra

Indian Institute of Technology Guwahati

Page 13: DEPARTMENT OF MECHANICAL ENGINEERING › pro › sites › default › files › AR_06-07_w-05.pdfProcessing, 20 (7), pp.1590-1614, 2006 R. Tiwari and N. Dharmaraju 'Identification

Funding Agency: DST, through S.N. Bose National Centre for Basic Sciences, Kolkata Duration: Long-term Amount: Rs.OA lakh (2005-2006)

PUBLICATIONS

Journal

S. Moretti, S. Munir, P. Poulose 'Another Step Towards a no-lose Theorem for NMSSM Higgs Discovery at the LHC', Physics Letters, B644, pp. 241-247, 2007

S. Venugopal Rao, A.A. Bettiol, K.e. Vishnubhatla, S.N.B. Bhaktha, D. Narayana Rao, F. Watt 'Fabri cation and characterization of Microl asers in SU8 doped with Rhodamine B using high energy proton beam,' Appl. Phys. Lett., 90, pp . 101 -115, 2007

M.P.e. Kalita, A. Perum al and A. Srinivasan 'Structural analysis of mechanically all oyed nanocrystalline Fe75Si15AI10 powders', Materials Letters, 61, pp. 824-826, 2007

A. Medhi, S. Basu and e.Y. Kadolkar 'Stabili ty of the Gutzwiller projected BCS wavefunction in t-J bi layers: A Variational Monte Carlo study', Physica C, 451, pp. 13,2007

S. Sinhaand S.B. Santra 'Mul tifractality in rotational percolation models', Physica A, 376,pp. 351,2007

M.K. Nandy 'A rigorous framework for Leslie's model of homogeneous anisotropic turbulence', journal of Physics A: Mathematica l and Theorerical, 40, pp. 2219-2226, 2007

A. Khare 'Pulsed Operation of a CW diode Laser, Electronics Projects', 22,pp.127-128,2006

A.A. Bettiol, S. Venugopal Rao and F. Watt 'Fabri cation of buried, channel waveguides in Foturan glass using proton beam writing,' Appl. Phys. Lett., 88, 1711 06, 2006

A.A. Bettiol, E.J. Teo, e.N.B. Udalagama, S. Venugopal Rao, J.A. van Kan, P. Shao, F. Watt ' Integrating photonic and microfluidic structures on a device fabricated using proton beam writing,' Proceedings ofSPIE. 6186, 61860F, 2006

I. Sharma and A. Srinivasan 'Electrical properties ofV205-CaO-B203 glasses exhibiting majority charge carrier reversal', Physics and Chemistry of

Annual Report 2006-2007

Glasses - European journal of Glass Science and Technology Part B, 47, pp. 301-309, 2006

K. Alti and A. Khare 'Sculpted pulsed indium atomic beams via selective laser abaltion of thin film', Laser and Particle Beams, 24, pp. 469-473,2006

M. Kar, A. Perum al and S. Ravi 'Critical behavior studies in La1 -xAgxMn03 double-exchange ferromagnet', Phys. Status. Solidi A, 243, 1908, 2006

A. Perum al, Hyun-Seok Ko, Sung-Chul Shin 'Low temperature noncol linear behavior in FePt nanogranular thin fi lm system', Thin Solid Films, 510, 280,2006

e.Y. Kadolkar and S. Basu 'Phase diagram of the t-J model on a honeycomb lattice', Physica l Review B, 73, pp. 104501, 2006

A. Medhi, S. Basu and e.Y. Kadolkar 'Quantum M onte Carlo study of the Hubbard model doped with nonmagnetic impurities', Physica B, 378-280, pp. 430, 2006

K. Alti and A. Khare 'Arrays of discrete atomic beams for sub 1/2 lithography via dipole force', Microelectronic Engineering, 83, pp. 1975-1980,2006

S. Basu 'Gap functions in anisotropic superconductors', Physica B, 378-380, p-315, 2006

S. Sinha and S.B. Santra 'Effect of field direction and field Intensity on Directed Spiral Percolation', Int. j . Mod. Phys. c., 17, 1285,2006

K. Alti, A.S. Patra and A. Khare 'Two Dim ensional periodic potential via multiple beam interferometry for atom lithography', j Microlitho Microfab, Microsystems, 5 (2), 023005, 2006

S.K. Khijwania 'Optica l Fiber Sensing Technology : Principle and Application s', LASSI Bulletin, India, 2006 (invited paper)

A. Khare 'Line Integrated Electron Density profi le in a Spark Gap using Michelson Interferometer', Plasma India (News letter of Plasma Science Society of India), 21 (3), II I, 2006

P. K. Nayak and S. Ravi 'Excess cond uctivity and magneto-conductivity studies in pure and Ag doped (La1-xYx) 2 Ba2CaCu50z superconductors', Superconductor Science and Technology, 19,pp.1 209-1214,2006

113

Page 14: DEPARTMENT OF MECHANICAL ENGINEERING › pro › sites › default › files › AR_06-07_w-05.pdfProcessing, 20 (7), pp.1590-1614, 2006 R. Tiwari and N. Dharmaraju 'Identification

P.K. Nayak and S. Ravi 'Excess Conductivi ty in the Paracoherence Regim e of pure and Ag doped (La1-xYx) 2Ba2CaCu50 z superconductors', Solid State Communica tions, 140, pp. 464-468, 2006

P.K. Nayak and S. Ravi 'Study of Magneto-Conductivi ty in (La-1 .6Y0.4) Ba2-CaO.8Cu 4.80z Su perconductors', Journal of Superconductivity and Magnetism , 19, pp. 515-520, 2006

S.K. Srivastava, M. Kar and S. Ravi 'Linear and Non-linear AC Susceptibil ity Studies in La(Mn1-x-Cux)0 3', Journal of Magnetism and Magnetic Ma terials , 307,pp.318-324,2006

P.K. Nayak and S. Ravi 'AC Susceptibility and Intergranular Criti cal Current Density Study in Pure and Ag doped (La1 xYx)Ba2 CaCu50z Superconductors', Solid State Communications, 138, pp. 377-381,2006

M. Kar, S.M . Borah and S. Ravi 'Study of El ectri cal Transport and M agneti c Properti es in CaMn1-xCux03', Materials Science and Engineering, B 129, pp. 54-58, 2006

M. Kar and S. Ravi ' Electrical resistivity and AC susceptibility studies in Sr1-xLaxMn03', Modern Phys ics Letters B, 20, pp. 1517-1528, 2006

P. K. Nayak and S. Ravi 'Excess Conductivity in th e M ean Fi eld and Paracoherence Regi m es o f (La-1. 6Y0 .4) Ba2 CaO. 8Cu4 .8 0 z Superconductors', Modern Phys ics Letters B, 20, pp. 111-122,2006

N. Oh ta, K.L. Panigrahi 'Supersymmetric Intersecting Branes in Time-dependent Backgrounds', Phys. Rev., D74: 126003,2006

Fotopoulos, K. L. Panigrahi, M. Tsulaia 'Lagrangian formulation of higher spin theories on AdS space', Phys. Rev., D74: 085029, 2006

R.R. Nayak, K.L. Panigrahi, S. Siwach 'Time-dependent supergravity solu tions in null dil aton background', Phys. Lett., B 640, pp. 214-218, 2006

R.R. Nayak, K. L. Panigrahi 'D-Brane solutions in a light-like linear dilaton background', Phys . Lett., B 638, pp. 362-366,2006

J. Kluson, R.R. Nayak, K.L. Panigrahi 'D1-brane with over critical electric fie ld in AdS(3) and 5-brane', Journal of High Energy Physics, 0605:022, 2006

114

CONFERENCE PROCEEDINGS

A. Kh are 'Measurement of Photon life time in a diode laser', Vth

Conference of Physics Academy of North-East, pp. 30, Gauhati University, Guwahati, 1-3 M arch 2007

G. Shukla and A. Khare 'Opti cal and stru ctural studies of reactive pu lsed laser deposited ain thin film s', vth Conference of Physics Academy of North-East, Gauhati University, Guwahati, 1-3 March 2007

M .P.C. Kalita, A. Perum al and A. Srinivasan ' Effect of heat treatm ent on nanocrystalline Fe75Si25 and Fe7 5Si 15Cr1 0 powd ers', V th Conference of Ph ysics Academy of North-East, Gauhati University, Guwahati, 1-3 March 2007

S. Sarm a and A. Srinivasan ' Influence of cooling rate on the properties of ferromagnetic shape memory alloy ', Vth Conference of Physics Academy of North-East, Gauhati University, Guwahati, 1-3 M arch 2007

S.B. Santra and S.R. Chanu 'A Num erical M odel of Glass Di ssolution in Water', Vth

Conference of Physi cs Academy of North-East, Gauhati University, Guwahati, 1-3 M arch 2007

P. Dey and S. Basu ' Does BCS-BEC crossover expl ain s Pseudogap?' Vth

Conference of Physics Academy of North-East, Gau hati University, Guwahati, 1-3 M arch 2007

P.K. Nayak and S. Ravi 'Study of Critical Current Density from AC Su sceptibility M easurem ents in (La 1-xYx) 2 Ba2CaCi50z Supercondu ctors', pp . 78, Vth Conference of Physics Academy of North-East, Gauhati University, Guwahati, 1-3 March 2007

S. K.Srivastava and S. Ravi 'E lectr ica l Transpo rt and M agneti c Prope rties on LaO.85-AgO.15(Mn1-yAly) 0 3 Compounds', pp. 83, V th

Conference of Physi cs Academy of North-East, Gau hati University, Guwahati, 1-3 M arch 2007

M . Kar and S. Ravi 'Spin Glass Behaviour Stud ies in (La1-x-Cux)Mn03', pp. 62, V th Conference of Physics Academy of North-East, Gauhati University, Guwahati, 1-3 M arch 2007

S.K. Srivastava, M. Kar and S. Ravi 'Crystal Stru cture Studies on LaO.85AgO.15Mn1-yAly03 Compoun ds', pp. P102, 36 th Nationa l Seminar on Crystallography, University of Madras, Chennai, 22-24 January 2007

Indian Institute of Technology Guwahati

Page 15: DEPARTMENT OF MECHANICAL ENGINEERING › pro › sites › default › files › AR_06-07_w-05.pdfProcessing, 20 (7), pp.1590-1614, 2006 R. Tiwari and N. Dharmaraju 'Identification

A. M edhi, S. Basu and CY. Kadolkar 'Nonmagnetic impuri ties in a two-leg Hubbard ladder', 10th Joint MMM/interm ag Conference, Baltimore, M aryland, USA, 7-11 January 2007 (The paper will be published as a regular refereed article in Journal of Applied Physics)

S.B. Santra 'Self-organized cri ticality ata dynamical equilibrium between a random solid and a solution', Statphys Kolkata VI, 5-9 January 2007

D.K. Singh, P.K. Iyer and P.K. C iri ' Improved chemi cal syn thesis o f multiwal led carbon nanotubes', Proc. In ternational Conference on Advanced Nanom eterials, pp. 164, Bombay, January 2007

P.K. Ciri, S. Bhattacharyya, B. Chetia, P.K. Iyer, B.K. Panigrahi and K.C.M. Nair ' N ove l low te mp erature chemical synthesis and characteri zation of z in c ox id e nanostructures', Proc. International Conference on Advanced Nanometeri als, pp. 161, Bombay, January 2007

M.P.C Kalita, A. Perumal, A. Srinivasan and H.C Verm a ' Properties of nanocrystalline Fe75Si15M1 0 (M = AI and Cr) powders prepared by mechan ical alloying', Advanced Nano M aterials 2007, liT Bombay, 8-10 January 2007

M .P.C Kalita, A. Peru mal, A. Srinivasan, B. Pandey and H .C. Verma 'Properties of nanocrystalline Fe75Si15M1 0 (M= AI, Cr) powders prepared by mechanical alloying', Proceed in gs of Advanced Nanomaterials 2007, An International Conference on Experim ental Condensed Matter Physics, January 2007, Mumbai, India

R.K. Singh, A. Srinivasan and C.P. Kothiyal 'Studies on new bioglasses and bioglass-ceramics containing Fe304', Proc. Solid State Phys. Symp., Bhopal, 26-30 D ecember 2006

S. Sarm a and A. Srinivasan 'Study o f M artensi te-Austenite phase transformation in Co­Ni-Ca ferrom agnetic shape memory alloys', Proc. Solid State Phys. Symp., Bhopal, 26-30 December 2006

M.P.C Kalita, A. Perumal and A. Srinivasan ' Preparation of non-equili brium solid solution Fe75Si25-xMx (M = AI, Cr and B) alloys with nanocrystallin e stru cture by mechanical alloying', Proc. Solid State Phys. Symp., 51, 32 1, Bhopal, 26-30 December 2006

D. Mishra and A. Perum al 'Studies on ferrom agnetic nanocrysta lline Fe-Zr-B alloys', Proc. DAE So lid State Physi cs Symp., 51, 273, 26-30 December 2006

M.P.C Kalita, A. Perum al and A. Srinivasan 'Preparation o f non-equilibrium Solid Solution of Fe75Si 25-xM x (M =AI, Cr, B) with nanocrysta lline structure', Proc.

Annual Report 2006·2007

DAE Solid State Physics Symp., 51, 321, 26-30 December 2006

C.S. Paul and P. Agarwal 'Transport Properties Studies of the CdS Nanorods Thin Films Prepared by Thermal Evaporation Technique', DAE-Salid State Physics Symposium, Barkh atulla University, Bhopal, 26-30 December 2006

P. Cogoi, TA Ansari, P. Agarwal 'Steady State Photo Carrier Crating Technique: A powerful tool for measu rem ent of charge carrier diffusion length', DAE-Solid State Physics Symposium, Barkhatulla University, Bhopal, 26-30 December 2006

A. M edhi , S. Basu and CY. Kadolkar 'Coexistence of superconductivity and anti ferromagnetism in a bilayer t-J model ', Proceed ings of the DAE Solid State Physics Symposium, Barkh atu lla University, Bh opal, 26 -30 December 2006

S.K. Srivastava, M. Kar and S. Ravi 'Effect of Co Substitution on Crystal Structure and M agnetic Prop erty of LaO.85AgO.15Mn1-yCoy0 3 (y=O to 1) Compounds', Proceed in gs of DAE Solid State Physics Symposium, 51, pp. 851-852, Barkhatulla University, Bhopal, 26-30 December 2006

S. Sarm a and A. Srinivasan 'Magnetic and thermal characte risation of Co-N i -Ca ferromagnetic shape memory al loys', National Conference on Sensors and Actuato rs: Emerging Technologi ca l Challenges, CCCRI, Kolkata, 21-22 December 2006

N. Venkatram, S.J. M athews, S.C Kumar, L. Ciribabu, S.Y. Rao, D.N. Rao 'Nonlinear optical studies of phthalocyanines in solutions and thin films of PMMA studied using cw and nanosecond pulse excitation , ' Proc. Photoni cs 2006, University of Hyderabad, Hyderabad, 13-16 December 2006

K.C Vishnubhatl a, S.V. Rao, D.N. Rao 'Femtosecond laser direct w ri ti ng of waveguides and microstructures in silicate and Foturan glasses,' Proc. Photonics 2006, University of Hyderabad, Hyderabad, 13-16 December 2006

S.V. Rao, A.A. Bettiol, F. Watt ' Proton Beam Writin g : Fabrication of mi crophoton ic components in SU8, PMMA, and FOTURAN,' National Laser Symposium, CAT, Indore, 5-7 December 2006

S.J. M athews, L. Ciribabu, S.V. Rao 'Nonlinear optical and optical limi t ing properti es of phthalocyanines in solutions and thin films of PMMA studied using cw excitation,' N ational Laser Symposium, CAT, Indore, 5-7 December 2006

C. Shukla and A. Khare ' Reactive Pulsed Laser Deposition of AIN and Effects of Nitrogen Pressure', Proceedings Pl asma 2006, Jaipur, December 2006

115

Page 16: DEPARTMENT OF MECHANICAL ENGINEERING › pro › sites › default › files › AR_06-07_w-05.pdfProcessing, 20 (7), pp.1590-1614, 2006 R. Tiwari and N. Dharmaraju 'Identification

AS. Patra and A Khare 'Delocalized hexagonal Array generation uing polarizi ng beam interferometry with better light coupling Efficiency', Proceedings of the 8th International Conference on Optoelectronics, Fibre Optics and Photonics, Photonics 2006, Hyderabad, December 2006

S.K. Khijwania, H.Y. Au, H.Y. Tam 'Fiber Bragg Grating based Accelerometer', Photonics 2006, University of Hyderabad, Hyderabad, 2006

K. Datta, S. Kumari, D.K. Singh and P.K. Giri 'Synthesis and studies of isolated germanium nanoparticles in the quantum confinement regime', Proc. International Conference on Lasers and Nanomaterials ((CLAN), Koikata, November 2006

P.K. Giri, P.K. Patel, c.J. Panchal, S. Bhattacharyya, S. Kumari, D.K. Singh, VA Kheraj, N.M. Shah, P.D. Vakil, K.j. Patel, M.S. Desai, B.R. Rehani, V.J. Rao, R.R. Desa i, D. Lakshminarayana, P.B. Patel 'Studies on Zinc Oxide Nanorods Grown Electron Beam Evaporation Technique', Proc. International Conference on Nano-materials for electronics (ICNME-2006), Pune, November 2006

K.L. Sreenivasan, T. Philip, S.K. Khijwania and J.P. Singh 'Humid ity Estimation Using Neural Network from Sensor Data', Preoc. ISCA 19th International Conference on Computer Applications in Industry and Engineering(CAINE 2006), pp. 341-345, Las Vegas, NV, November 2006

S. Sinha and S.B. Santra 'Finite size scaling and multifractality in directed spiral percolation', International conference on Recent advances in the Interdisciplinary application of Statistical Physics, ICTp, Italy and ICTS, Chinese Academy of Sciences (CAS), Beiji ng, China, 20-22 September 2006

R.K. Singh, A Dixit, S. Sarma, P.S. Robi, G.P. Kothiyal and A Srinivasan 'Synthesis and preliminary characterization of a new class of bioglass ceramics for hyperthermia treatment application', National Symposium on Science and Technology of Glass! Glass-Ceramics (NSGC-06), BARC, Mumbai, 15-16 September 2006

S.B. Santra and D. Deb 'A simple model of Glass dissolution in water', Science and Technology of Glass and Glass Ceramics, BARC, Mumbai, 15-16 September 2006

D. Deb and S.B. Santra 'Sandpile under rotational constraint', Condensed Matter Days 2006, Tezpur University, Assam, 29-31 August 2006

S. Sinha and S.B. Santra 'Finite size scaling theory for anisotropic percolation clusters', Condensed Matter Days 2006, Tezpur University, Assam, 29-31 August 2006

116

A Medhi, S. Basu and c.y. Kadolkar 'Variational Monte Carlo study of magnetic correlations of bilayer t-J model', Condensed Matter Days, Tezpur University, Assam, 29-31 August 2006 (The paper will be published as a regular refereed article in Indian Journal of Physics)

P. Dey and S. Basu 'd wave Correlations for Anisotropic Superconductors', Condensed Matter Days, Tezpur University, Assam, 29-31 August 2006 (The paper will be published as a regular refereed articl e in Indian Journal of Physics)

S.K. Srivastava and S. Ravi 'Crystal Structure and Magnetic Properties of Hexagonal Y1-xCexMn03', National Conference on condensed matter physics, Tezpur University, 29-31 August 2006

S. Basu and c.y. Kadolkar 'Thermodynamics of noninteracting electrons', Condensed Matter Days, August 2006 (The paper will be published as a regular refereed article in Indian Journal of Physics)

D.K. Singh, P.K. Iyer, and P.K. Giri 'Functionalization of Carbon nanotubes and study of its optical and structural properties', International conference on Nanotechnology - Material and Methods (CIT -NANOTECH 2006), Coimbatore, July 2006

A Perum al, V. Srinivas, R.A Dunlap 'Microstructure and M agnetic properties of nanocrystalline Fe-Mn-Zr al loy', Proceedings of Intern ational Conference on Nanotechnology - Materials and Methods, Coimbatore, India, 23-25 June 2006

A Perum al, Hyun-Seok Ko, Sung-Chul Shin 'Nano-granular type FePt perpendicular thins films for ultrahigh density perpendicular recording media', Proceedings of International Conference on Nanotechnology - Materials and Method s, Coimbatore, India, 23-25 June 2006

A Perumal 'Study of Magnetic properties of amorphous Fe-Mn-Zr alloys', Proc. Indian Natn. Sci. Acad. 72,43,2006

S.K. Khijwania 'Theoretical and Experimental Investigation of Model Power Characteristics in Multimode Step-Index Optical Fiber', IEEE Tencon, Hong Kong, 2006

S.K. Khijwania 'Vibrational damage Monitoring using Optical Fiber Accelero meter', 2nd International Congress on Computational Mechanics and Simulation (ICCMS 06), liT Guwahati, India, 2006

Indian Institute of Technology Guwahati

Page 17: DEPARTMENT OF MECHANICAL ENGINEERING › pro › sites › default › files › AR_06-07_w-05.pdfProcessing, 20 (7), pp.1590-1614, 2006 R. Tiwari and N. Dharmaraju 'Identification

PAPERS PRESENTED IN CONFERENCES/ WORKSHOPS/SYMPOSIA

M .P.C Kalita, A. Perumal, A. Srinivasan ' Effect of heat treatment on nanocrystalline Fe7sSi2s and Fe7sSi, sCr,o powders', Physics Academy of North East, Cuwahati, March 2007

C. Shukla and A. Khare 'Optical and structural studies of reactive pulsed laser deposited AIN thin films', Physics Academy of North East, Cuwahati, March 2007

P. Cogoi, P. Agarwal 'Stable hydrogenated amorphous silicon films with high deposition rate prepared by argon dilution for cost effective device application' Physics Academy of North East, Cuwahati, 2007

K.L. Panigrahi 'D-branes in null linear dilaton backround', Physic Academy of North East, Cuwahati, March 2007

S.B. Santra and S.R. Chanu 'A Numerical Model of Class Dissolution in Water', Physic Academy of North East, Cuwahati, March 2007

A. Khare 'Measurement of Photon Life time in a diode laser', Physic Academy of North East, Cuwahati, March 2007

M. Kar and S. Ravi 'Spin Class Behaviour Studies in (La,.x.Cu)Mn03', Physic Academy of North East, Cuwahati, March 2007

P.K. Nayak and S. Ravi 'Study of Critical Current Density from AC Susceptibility Measurements in (La" xY)2 Ba2CaCisOz Superconductors', Physic Academy of North East, Cuwahati, March 2007

S.K. Srivastava and S. Ravi 'Elect rical Transport and Magnetic Properties on Lao.8s.A&.,s(Mn, .yAI)03 Compounds', Physic Academy of North East, Cuwahati, March 2007

S.K. Srivastava, M. Kar and S. Ravi 'Crystal Structure Studies on Lao.8sAgo.,sMn,.yAly03 Compounds', 36 th National Seminar on Crystallography', University of Madras, Chennai, 22-24 January 2007

C.S. Paul and P. Agarwal 'Optical and transport studies of CdS nanocomposites synthesized by various routes', International Conference on Advanced NanoMaterialsANM-2007, liT Bombay, 8-1 0 January 2007

Ann ual Report 2006·2007

S.B.Santra 'Self-organized criticality ata dynamical equi librium between a random soild and a solution', Statphys Kolkata VI , 5-9 January 2007

P.K. Ciri 'Novel low temperature chemical synthesis and characterization of zinc oxide nanostructures', International Conference on Advanced Nanometerials (ANM-2007), Bombay, January 2007

P.K. Ciri 'Improved chemical synthesis of multiwalled carbon nanotubes', International Conference on Advanced Nanometerials (ANM-2007), Bombay, January 2007

M.P.C Kalita, A. Peru mal, A. Srinivasan, B. Pandey and H.C Verma 'Properties of nanocrystalline Fe75Si15M10 (M= AI, Cr) powders prepared by mechanical alloying', Advanced Nanomaterials 2007, International Conference on Experimental Condensed Matter Physics, Mumbai, India, January 2007

S.K. Srivastava, M . Kar and S. Ravi 'Effect of Co Substitution on Crystal Structure and Magnetic Property of LaO.85AgO.15Mn1-yCoy03 (y=O to 1) Compounds', DAE Solid State Physics Symposium, 26-30 December 2006

S.v. Rao 2 International and 2 National conference papers (Photonics 2006, University of Hyderabad, Hyderabad, 13-16 December 2006; National Laser Symposium 2006 at CAT Indore)

J. Anto Pradeep and P. Agarwal 'Preparation and Characterization of Porous Silicon Single and Multilayers for Photonic Applications', International Conference of Mesoscopic and Disordered Materials MESODIS 06, liT Kanpur, India, 4-8 December 2006

P. Cogoi, P.N. Dixit, P. Agarwal 'Transport and stabjlity studies on high band gap a-Si:H prepared by argon dilution', International Conference of Mesoscopic and Disordered Materials MESODIS 06, liT Kanpur, India, 4-8 December 2006

C.S. Paul, P.J . Sarmah, P.K. Iyer and P. Agarwal 'Synthesis and characterization of CdS nanoparticles doped poly (para phenylene) ' International Conference of Mesoscopic and Disordered M aterials MESODIS 06, liT Kanpur, India, 4-8 December 2006

A. Perumal and D. Mishra 'Studies on ferrom agneti c nanocrystallin e Fe-Zr-B alloys', DAE Solid State Physics Symp., Bhopal, India, December 2006

117

Page 18: DEPARTMENT OF MECHANICAL ENGINEERING › pro › sites › default › files › AR_06-07_w-05.pdfProcessing, 20 (7), pp.1590-1614, 2006 R. Tiwari and N. Dharmaraju 'Identification

M. P.e. Kali ta, A Perum al and A Srinivasan 'Preparation of non-equilibrium Solid Solution of Fe7sSi2s_

xMx (M = AI, Cr, B) with nanocrystalline structure', DAE Solid State Physics Symp., Bhopal, India, December 2006

G. Shukla and A Khare 'Reactive Pulsed Laser Deposition of AIN and Effects of Nitrogen Pressure', Plasma 2006, Jaipur, December 2006

K.L. Panigrahi 'Lagrangian Formul ation of Higher spin theories on AdS Space', International conference on Strin g Theory (lSM 06), Indian String Communi ty, Toshali Sands, Pu ri , December 2006

S.K. Kh ijwania, H.Y. Au, H.Y. Tam 'Fiber Bragg Grating based Accelerometer', Photonics 06, University of Hyderabad, Hyderabad, 2006

JA Pradeep and P. Agarwal 'Porous Sil icon based Dielectric Periodic Stru ctures for Photon ic Applications', Photonics 2006, Hyderabad University, India, 13-16 December 2006

AS. Patra and A Khare 'Delocalized hexagonal Array generation using polarizi ng beam interferometry with better light coupling Efficiency', Eight Intern ational conference on O ptoelectronics, Fibre optics and Photonics, Photon ics 2006, Hyderabad, December 2006

P.K. Giri 'Synthesis and stud ies of isolated germ anium nanopartici es in the quantu m confinement regim e', In tern ational Conference on Lasers and Nanomaterials (lCLAN), Koikata, November 2006

S. Sinha and S.B. Santra 'Finite size scaling and multifractality in di rected spiral percolation', In ternational conference on Recent advances in the Interdisciplinary application of Statisti cal Physics, ICTp, Italy and ICTS, Chinese Academy of Sciences (CAS), Beijing, China, 20-22 September 2006

S.B. Santra and D. Deb 'A simple model of Glass dissolution in water', Science and Technology of Gl ass and Glass Ceramics, BARC, Mumbai, 15-16 September 2006

S. Sinha and S.B. Santra 'Finite size scaling theory for anisotropic percolation clusters', Condensed M atter Days 2006, Tezpur University, Assam, 29-31 August 2006

P. Gogoi, TA Ansari, P. Agarwal 'Steady state photo ca rr ier grati ng techniq ue fo r measurement of charge carrier diffusion length' Condensed Mater Days 2006, Tezpur University, Assam, 29-31 August 2006

118

D. Deb and S.B. Santra 'Sandpile under rotational constraint', Condensed Matter Days 2006, Tezpur University, Assam, 29-31 August 2006

S.K. Srivastava and S. Ravi 'Crystal Stru cture and M agnetic Properties of Hexagonal Y,_xCexM n0 3' , Cond ensed M atter Days 2006, Tezpur University, Assam, 29-3 1 Au gust 2006

JA Pradeep, P. Agarwal and A. Kh are 'Selective Form ati on of Si0

2 Nanostructures via Laser

Ablation', Condensed M atter Days 2006, Tezpur University, Assam, 29-31 August 2006

S. Ghosh 'Phonons in random all oys', Workshop on Computational M ateri als Theory, JNCASR, Bangalore, Ju ly 2006

A Perum al, V. Srinivas, RA Dun lap 'Microstructure and M agnetic properties of nanocrystalline Fe-Mn -Zr all oy', In terna tional Conference on Nanotechnology - M aterials and M ethods, Coimbatore, Ind ia, 23-25 June 2006

A Perum al, Hyun-Seok Ko, Sung-Chul Shin 'Nano-granular type FePt perpendicul ar thins films for ul t rahi gh de nsity perpendicu lar recordi ng media', Intern ational Conference on Nanotechnology - Materials and M ethods, Coimbatore, India, 23-25 June 2006

S.K. Khijwania 'V ibrational damage M onitoring using O ptical Fiber Acce lerom eter ' , 2 nd In te rn ationa l Congress on Computational M echanics and Simu lation (lCCMS 06), liT Guwahati, India, 2006

CONFERENCES/WORKSHOPS/SYMPOS IA ATTE NDE D

A Khare attended the Vth Conference of Physics Academy of North-East, Gauhati University, Guwahati, 1-3 March 2007

A Srinivasan attended the Vth Conference of Physics Academy of North -East, Gau hati University, Guwahati, 1-3 M arch 2007

S.B. Santra attended the Vth Conference of Physics Academy of North-East, Gauhati University, Guwahati, 1-3 March 2007

K.L. Panigrahi attended the vth Conference of Physics Academy of North-East, Gauhati University, Guwahati, 1-3 March 2007

S. Rav i attend ed the 36 th N atio nal Seminar on Crystall ography, University of M adras, Chennai, 22-24 January 2007

P. Agarwal attended in ternational conference on 'Advanced Nano M ateri als-2007' held at Department of Physics, liT Bombay, 8-1 0 January 2007

Indian Insti tute of Technology Guwahati

Page 19: DEPARTMENT OF MECHANICAL ENGINEERING › pro › sites › default › files › AR_06-07_w-05.pdfProcessing, 20 (7), pp.1590-1614, 2006 R. Tiwari and N. Dharmaraju 'Identification

S.B. Santra attended Statphys Kolkata VI, 5-9 January 2007

P.K. Giri attended international conference on Advanced Nanometerials (ANM-2007), Bombay, Janu ary 2007

A. Perumal attended Advanced Nanomaterials 2007, an International Conference on Experimental Condensed Matter Physi cs, Mumbai, India, January 2007

S. Ghosh attended 'Asia-Sweden meetin g on magnetism in materi als', SNBNCBS, Kolkata, January 2007

S.V. Rao atte nd ed Photonics 2006, Univ ersity of Hyderabad, Hyderabad, 13-1 6 Decem ber 2006

M.K. Nandy participated in the 5th Indo-Germ an Winter Academy held at Palm Resort Digh a, organized by liT Kharagpur during 13-16 December 2006

S.K. Khijwania attended Intern ational Conference on Fiber Optics and Photonics, PHOTONICS' 06, Hyd erabad, India, December 2006

K.L. Panigrahi attended In the In eternational conference on String Th eory (ISM06) organized by Indian String Community at Toshali Sands, Puri in December 2006

A. Kh are attended the PSSI-IPR workshop on National Fu sion Programm e ITER and beyond, Ahm edabad, 8-10 November 2006

P.K. Giri attended the intern ational conference on Lasers and Nanomaterials (ICLAN), Kolkata, November 2006

S.B. Santra attended Science and Technology of Glass and Glass Ceramics, BARC, Mumbai, 15-16 September 2006

A. Srinivasan attended National Symposium on Science and Technology of G/ass/G/ass-Ceramics (NSGC-06), BARe, Mumbai, 15-16 September 2006

K.L. Panigrahi attended International Workshop on String Theory held at Institute of Physics, India in September 2006

G.S. Setlur attended the Intern ational Conference of Physics Near Mott Transition, IISc Bangalore, 24-28 July 2006

S.V. Rao attended a SERC school on Ultrafast Studies at University of Hyderabad in July 2006

S. Ghosh attended an workshop on 'Computational Materials Th eory', JNCASR, Bangalore, July 2006

A. Peru mal attended the Intern ation al Conference on Nanotechnology - M ateri als and M ethods, Coi mbatore, India, June 2006

S.K. Khijwania attended 2nd In ternational Congress on Computational Mechanics and Simulation (lCCMS 06), liT Guwahati, India, 2006

Ann ual Report 2006-2007

INVITED LECTURES OF FACULTY

A. Srinivasan, ' Fragility of Pb modified Ge-Se(-Te) glasses' (invited talk) in Conference of Physics Academy of the North East (PANE 2007), 1-3 March 2007, Gauhati University, Guwahati

S.B. Santra, 'Stochastic M ethods: M onte Carlo Simulation', Refresher Course on Computational Physics, Departm ent of Physics, Gauhati University, 22 January - 11 February 2007 (Four Lectures)

S.B. Santra, 'Critical Phenom ena and Lattice statistical Models', 2nd Premtosh Shyam M emorial lectu re, Cotton Coll ege, Guwahati, 7 February 2007

S.Ghosh,lnvited lecture on 'Systematic,multisite,short-range­order corrections to the Electronic structure of disordered alloys from first-principles: the KKR-nonl ocal CPA' in Asia­Sweden meeting on magnetism in materi als, SNBNCBS, Kolkata, January 2007

S.K. Khijwania, 'Evolution of Optical Fiber Technology in Telecommunication and Sensing', Department of Electronics Science, Gauhati University, January 2007

S.v. Rao, 'Fabrication of micro-photonic components in SU8 and PMMA using Proton Beam Writin g,' Invited talk at Photonics 2006, held at University of Hyderabad, Hyderabad from 13-16 December 2006

A. Srinivasan, 'Nanotechnology', Sibsagar College, Sivasagar, 8 December 2006

K.L. Panigrahi, Invited talk at the Intern ational conference on String Th eory (ISM06) organized by Indian String Community atToshali Sands, Puri in December 2006

S.K. Khijwania, 'Fiber Optics-Technology and applications', Physics Learning Camp by DST, liT Guwahati, December 2006

G.S. Setlur, 'The physics of Nanomaterial', Summer Training Programme for Undergraduates from the North east, liT Guawhati, 2006

A. Srinivasan, 'A pedagogic approach to research in basic sciences', Workshop on Research M ethodology in Basic Sci ences, Assam University, 16 November 2007

S. Basu, 'Ph ase sepa rat i o n i n a two-dimensional Hon eycomb lattice', Theoretical Physi cs Seminar Cirquit Seminar, Saha Institute of Nuclear Physi cs (SINP), Kolkata and SN Bose N at io nal Center for Basic Scie nces (SNBNCBS), Kolkata, November 2006

S. Basu, ' Ph ase oft-J model-A case study for honeycomb lattice', Th eoretical Physics Seminar Circuit Colloquium, Delhi University and liT Roorkee, India, September 2006

S.v. Rao, ' Femtosecond laser direct writing,' SERC School on Ultrafast Studies held at University of Hyderabad, Hyderabad, 10-29 July 2006 (Three hours of lectures)

11 9

Page 20: DEPARTMENT OF MECHANICAL ENGINEERING › pro › sites › default › files › AR_06-07_w-05.pdfProcessing, 20 (7), pp.1590-1614, 2006 R. Tiwari and N. Dharmaraju 'Identification

VISITORS FROM OTHER INSTITUTES/UNIVERSITIES

Dr. Subrata Bal, School of theoretical Physics, Dublin Institute of Advanced Studies, Ireland

Dr. Swap an Mandai, Visva Bharati University, West Bengal, India

Dr. Nilanjan Roy, National Institute of Pharmaceutical Education and Research, Chandigarh, India

Dr. Joydeep Ghosh, Institute of Plasma Research, Gandhinagar, Gujarat, India

Dr. Aftab Alam, S. N. Bose National Centre for Basic Sciences, Kolkata, India

Dr. Tarak Nath Dey, Oklaham State University, USA

Dr. Ratnamala Chatterjee, liT Delhi, India

Prof. Anurag Sharma, liT Delhi, India

Dr. Debasis Dan, Indian University, USA

Dr. S. Murugavel, Max-Plack Institute for Theoretical Physics, Germany

Dr. Ravindra Pandey, Michigan Technologycal University, USA

Dr. Ashok Kumar, BARC, Mumbai, India

SHORT-TERM COURSES

' Physics Learning Camp for Undergraduate Students,' during 27 November - 2 December 2006, held at liT Guwahati, supported by the Department of Science and Technology, Government of India. It was coordinated by M.K. Nandy.

PATENT FILED

P.K. Iyer, P.K. Giri, S. Bhattacharyya, B. Chetia 'Method to synthesize nano sized zinc oxide', Indian Patent Application No. 563/K01/2006

AWARDS AND HONOURS

P. Poulose selected for Marie Curie International Incoming Fellowship under the Framework Programme 6 of European Union Project: 'A study of CP violation in the Higgs Sector of Supersymmetric Models' Research work carrying out at University of Southampton, United Kingdom.

S.K. Khijwania, Visiting Assistant Professor at Department of Electrical Engineering, The Hong Kong Polytechnic University, Hong Kong (2006)

SPECIAL MENTION

M.K. Nandy participated in editing and rewriting part of the manuscript of 'Physics Text Book for Class XII' during 10-14 August 2006, held at the Department of Education in Science and Mathematics, National Council of Education Research and Training, Government of India.

A. Khare, member, Textbook Development Committee for class XII, NCERT, New Delhi.

120

P.K. Giri is a Member of Technical Advisory Committee, International Conference Emerging Mechanical technology, Macro to Nano, 16-18 February 2007.

S.V. Rao is a Referee for articles in Handbook of Computer Networking, John Wiley & Sons, Inc.

A. Perumal is a memb er in Advisory Committee, ' International Conference on Nanomaterials and its applications', organized by Department of Chemistry, National Institute of Technology, Thiruchirapalli, India, February 2007.

A. Peru mal is a standard referee for Physical Review Journals and reviewer for Journal Applied Physics and Applied Physics Letters.

c.Y. Kadolkar, leader of Indian delegation to ' International Physics Olympiad' held at Singapore, July 2006.

S. Ghosh chaired a session on 'Functional Materials' in the international workshop on 'Computational Materials Theory', JNCASR, Bangalore, July 2006.

S. Ghosh is a reviewer for the article subm itted to Journal of Physics: Condensed Matter and Physical Review B.

S.K. Khijwania, Member, Programme Committee, IEEE TENCON 2006, Hong Kong.

S.K. Khijwania, M ember, Organization Committee, 2nd

International Congress on Computational Mechanics and Simulation (lCCMS 06), liT Guwahati, India.

S.K. Khijwania, referee for IEEE Sensor Journal, and Optics Letter.

K.L. Panigrahi, referee for Physics Letters B.

P. Agarwal is a reviewer for the articles submitted to Journal of Non crystalline Solids, an Elsevier journal.

P. Agarwal was the member of Local Organising Committee for the National Conference 'Condensed Matter Days-2006' held at Department of Physics, Tezpur University, 29-31 August 2006.

A. Khare is a referee for Optics and Laser Technology.

FACULTY MEMBERS

P. Agarwal PhD (liT Kanpur) Assistant Professor Areas of Interest: Condensed Matter Physi cs (ExpLL Photovoltaic Materials and Devices

S. Basu PhD (liT Kanpur) Assistant Professor Areas of Interest: Condensed Matter Physics (TheoryL Superconductivity

Indian Institute of Technology Guwahati

Page 21: DEPARTMENT OF MECHANICAL ENGINEERING › pro › sites › default › files › AR_06-07_w-05.pdfProcessing, 20 (7), pp.1590-1614, 2006 R. Tiwari and N. Dharmaraju 'Identification

S. Ghosh PhD (SNBNCBS, Kolkata) Assistant Professor Areas of Interest: Cond ensed Matter Physics (Theory), Electronic Structure Th eory

P.K. Giri PhD (lIT Kanpur) Associate Professor Areas of Interest: Condensed Matter Physics (Expt.), Nanomaterials and optoelectronics

G. Jose (Till December 2006) PhD (Mahatma Gandhi University, Kottayam) Assistant Professor Areas of Interest: Lasers and Photonics (Expt.), Integrated optics

c.Y. Kadolkar PhD (liT Bombay) Associate Professor Areas of Interest: Condensed Matter Physics (Theory), Defects in Ionic Materials

A. Khare PhD (liT Kanpur) Professor and Head Areas of Interest: Lasers and Photonics (Expt.), Laser Physics and Spectroscopy

S.K. Khijwania PhD (liT Delhi) Assistant Professor Areas of Interest: Laser and Ph otoni cs (Expt.), Fiber and In tegrated Optics

M.K. Nandy PhD (lIT Kanpur) Associate Professor Areas of Interest: Th eo retical Physics, Nonlin ea r dynamics

D. Pal (From September 2006 onwards) PhD (TIFR, Mumbai) Assistant Professor Areas of Interest: Condensed Matter Physi cs (Expt.)

Annual Report 2006-2007

K.L. Panigrahi PhD (lOp, Bhubaneswar) Assistant Professor Areas of Interest: Th eoreti cal Physics, String theory and D­branes'

A. Perumal PhD (lIT Kharagpur) Assistant Professor Areas of Interest: Condensed Matter Physics (Expt.), Nanomagnetic M aterials

P. Poulose (On leave) PhD (Phys. Res. Lab, Ahmedabad) Assistant Professor Areas of Interest: Th eoretical Physi cs, High Energy Physics Phenomenology

S.Y. Rao PhD (University of Hyderabad) Assistant Professor Areas of Interest: Laser and Photonics (Expt.), Nanophoton ics

S. Ravi PhD (University of Hyderabad) Associate Professor Areas of Interest: Cond ensed Matter Physi cs (Expt.), Superconductivity and magnetism

S.B. Santra PhD (Bose Institute, Kolkata) Associ ate Professor Areas of Interest: Condensed Matter Physi cs (Theory), Statisti cal Physics

G.S. Setlur PhD (University of Illinois) Assistant Professor Areas of Interest: Theoretical Physics, Higher dimensional Bosonization

A. Srinivasan PhD (lISc, Bangalore) Professor Areas of Interest: Condensed M atter Physi cs (Expt. ), Materials science

121

Page 22: DEPARTMENT OF MECHANICAL ENGINEERING › pro › sites › default › files › AR_06-07_w-05.pdfProcessing, 20 (7), pp.1590-1614, 2006 R. Tiwari and N. Dharmaraju 'Identification

CENTRE FOR ENERGY

INTRODUCTION

The Centre for Energy at liT Guwahati is an inter-disciplinary centre deriving its strength from the basic disciplines of physics, biotechnology, chemical engineering and mechanical engineering. The Centre imparts teaching, training, conducts research and provides consultancy in various facets of energy system such as bioenergy, tissue cultu re, energy efficiency, alternative fuels, and solar energy. The Centre also offers Ph.D. programmes in the relevant areas. The Centre caters to the research and training needs of the northeast region and intends to grow to a major Centre in the region catering to the trai ning and research needs of the Indian energy sector and contributing to the international research in energy. The Centre has strategies to go for plantation of biofuel trees especially Jatropha sp. and Pongamia sp. in the unused and non arable land in the IITG campus, which particularly includes the area around hill top, with an aim to be self sustainable for biodiesel related research work and contributing to ecological balance as well. Already flooring for the said pu rpose has been initiated. The interdi scip linary approach to teaching, research and consultancy provides a unique perspective on how governments, business and commu nities operate, providi ng the professionals of today with the abi li ty to meet the chall enges of tomorrow. The Centre is aim ed at provid in g faci liti es to researchers/ engineers to contribute meaningfully to the nation's energy sector. It is expected that the rapid growth of the energy sector and the challenges imposed by energy resou rce constraints will need specially trained engi neers in energy sectors.

The following laboratories have been established and running full fledged in the Centre -

Bio-energy Lab Tissue Cu lture Lab Energy Efficiency Lab Combustion Lab Solar energy Lab

ACADEMIC ACTIVITIES

The PhD programme started in July 2005. The total number of PhD students is 7 (seven); 4 (four) were enrolled in the first batch and 3 (th ree) in the second batch. The Centre has its plan to start MTech programme soon. The following areas of research has been identified for research work -Fuel and combustion Porous medium combustion Energy auditing Biomass gasifier

122

Solar PV system and solar therm al systems Hydropower Energy storage Bioprocess for Bi odiesel production Alternative fuel Fluidized bed Energy conservation Biogas and Bioenergy Direct energy conversion Fuel cells Drying system

STUDENT INTAKE

Seven PhD scholars have been enrolled in the Centre. First batch Uuly 2005): 4 Second batch Uuly 2006): 3

FACULTY STRENGTH

The Centre does not have faculty members as such since the activities of the Centre are interdisciplinary. It is headed by Dr. P. Mahanta (Associate Professor, Department of Mechanical Engineering) and the activities of the Centre are decided through suggestions of the advisory committee, constituted by the following members:

Dr. S. Dutta, Department of Civil En gineerin g Dr. L. Sahoo, Department of Biotechnology Dr. U.K. Saha, Departm ent of Mechanical Engineering Prof. S.c. Mishra, Department of Mechanical Engineering Dr. P. Agarwal, Department of Physics Dr. V.S. Moholkar, Department of Chemical Engineering

Moreover, the following members are actively involved with the activities of the Centre.

Dr. P. Goswami, Departm ent of Biotechnology Dr. A. Verma, Department of Chemical Engineering

MAJOR EQUIPMENT AND FACILITIES

Major equipment purchased in the financial year 2006-2007 are given below:

Energy Efficiency Laboratory

Julabo heating Circulator (01 No.) Pressure Transmitter (20 Nos.) Corriolis Mass Flow Meter (01 No) Connectors (Assorted)

Solar Energy Laboratory

61/2 digit Multimeter (01 No.)

Indian Institute of Technology Guwahati

Page 23: DEPARTMENT OF MECHANICAL ENGINEERING › pro › sites › default › files › AR_06-07_w-05.pdfProcessing, 20 (7), pp.1590-1614, 2006 R. Tiwari and N. Dharmaraju 'Identification

High vacuum chamber for transport measurem ents (01 No.) Lock-i n ampli fier (01 No.) Digital Storage Oscilloscope (01 No.) Solar ai r drier (01 No.) Solar lantern System (01 No.) Solar photovoltaic home and street light systems (01 No.) SPY modules of assorted watt packs

Bioenergy Lab

Orbital incubator shaker Incubator Vacuum Rotary Evaporator PH M eter Oven Refrigerator Analytical stainless steel filtration unit Photoperiodic Cul ture Rack (06 Nos.) Illuminated Orbital Incubator Shaker Thermal Cycler Cryocan

Common Items

Compu ter (04 Nos.) UPS (06 Nos.) LCD Projector Printer

The following faci liti es are available in the Centre:

Energy Efficiency laboratory

Transesterification setup for Bio -diese l preparation Proximate analysis facil ity Property evaluation of liquid and soli d fuels viz. HS"D and biod iesel measuring faci liti es are available Air velocity measuring facili ty available Pum p testing setup Bi omass gasification unit IC Engine testing set up W ind energy measurement un it Fu el cell PEM set up

Bio-energy laboratory

Micropropagation facili ty for energy and bio-fuel Autoradiogram development facili ty Genetic Engineerin g Facility Biotransformation Cloning

Solar Energy laboratory

Demonstration unit for efficient use of solar energy Characterization and study of the photovoltaic module Energy spectrum measuring facili ty

Annual Report 2006-2007

Spectral response/photoconductivity/quantum efficiency and other transport measurements in the presence of light of photovoltaic modules, materials and devices faci lities are available

RESEARCH AND DEVElOPMENT ACTIVITIES

Th e following R&D activities are in progress in the Centre:

Micro propagati on and genetic engineeri ng of biofuel plant Jatropha curcus Micro propagation of biofuel plant Karanj and Nahar Micro propagation of medicinal plant kalomegh M icro propagation of other indigenous med icin al plant li ke Hydrocoty/e rotund ifo lia is in itiated Biotransformation of economically important plants and crops Fun gus treatment of areca nu t leaf sheath Property evaluation of biomass solid waste Fluoride removal by nonconventional energy Fuel cell membran e Biocatalytic process development for production of biodiesel

SPONSORED PROJ ECTS

The following research projects are in progress:

Title: Development of a Mul ti -fuel Cooking Stove (Research Project) Principal Investigator: S. Kakati Scientist Mentor: P. Mahanta, S.K. Kakoty Duration: 4 years Sponsoring Agency: DST Amount Sanctioned: Rs. 12 lakh

Title: Development of an Energy Effi cient M achine for Arecanu t Leaf Plate M anufacturing Investigators: P. Mahanta, U.S. Dixit, U.K. Saha, P. Kali ta, L. Barbora Duration: 6 month Sponsoring Agency: Dh riiti Amount Sanctioned: Rs.2.5 lakh Status: Completed

Title: Developm ent of micropropagation technology for large-scale cul tivation of Jatropha: A potential biofuel plant Investigator: L. Sahoo Duration: 3 years Sponsoring Agency: NEDFi Amount Sanctioned: Rs.2.35 lakh

Title: Biogas Development and Training Centre (BDTC) Sponsoring Agency: Ministry of Non-conventional En ergy Sources (MNES), New Delhi Amount Sanctioned: Rs.1 8 lakh Status: In progress

123

Page 24: DEPARTMENT OF MECHANICAL ENGINEERING › pro › sites › default › files › AR_06-07_w-05.pdfProcessing, 20 (7), pp.1590-1614, 2006 R. Tiwari and N. Dharmaraju 'Identification

Title: Design and Optimization of a Circulating Fluidized Bed (CFB) Biomass Gasifi er Investigator: V.S. M ohalkar, P. M ahanta Sponsoring Agency: DBT Amount Sanctioned: Rs.15.033 lakh

Title: Cloning of Elite Germplasm of Jatropha for Large Scale Plantation Investigator: L. Sahoo Duration: 3 years Sponsoring Agency: DARL Amount Sanctioned: Rs. 1 0 lakh

CONSULTANCY

Th e Centre received the following consultancy proj ects:

Technical Assessment of the Wind Turbine-cum-Water Pump System Developed by a Loca l Inn ovator (GIAN-NE, Guwahati), U.K. Saha, P. Mahanta, S.K. Dwivedy and P. Kalita (Proj ect cost: Rs.0.30 lakh)

Water sample testing for fluorid e content, Client: Ajmal Foundation, L. Barbora

PUBLICATIONS

Journal

P. Mahanta, S.c. Mishra and Y.S . Kushwah ' Experim ental Study of Pongamia Pinnata L. Oil as a diesel Substitute', Journal of Power and Energy, 220 (Part-A), pp. 803-808, 2006

P. M ahanta, S.c. Mishra and Y.S. Kushwah 'A Comparative Study of Pongamia Pinnata L. and Jatropha Carcus Oil as Diesel Substitute', International Energy Journal, 7 (1), 2006

chall enges and strategies for sustainabl e energy, efficiency and environment, Uttar Pradesh Technical University, lET campus, Sitapur Road, Lu cknow, pp.145-151, New Age International (P) Limited (ISBN 81-224-191 0-0) 10-11 June 2006

S. Chatterj ee, L. Barbora, A.K. Kumar, P. Goswami , N.N. Dutta, P. Goswami 'Purification, imm ob ili zati o n and app li cat ion o f a Pseudomonas lipase fo r transesterifi ca ti on o f lipid ', International Conference on Bi ofu el Vision-2015, 13-15 October 2006

National Conference/Sem i nar

P. Kalita, M.C. Borah and P. M ahanta ' Improved Biogas Digester and Vermi compost Plant: An Economica lly Vi able Unit', Instituti ons of Engineers (Indi a), Guwahati, 9-10 September 2006

S. Kakati, P. M ahanta, S.K. Kakoty 'Perform ance Enhancement of High Pressure Kerosene Stove Throu gh Porous M edium In serts', 22 nd National Convention of Mechan ical Engineers on Energy Technologies- Strategies

"""--for Optim al Utilization of Natural Resources, Instituti on of Engineers (India), pp. 54-58, 9-1 0 September 2006

S. Kakati 'Effect Of Heat Losses on Overall Perform ance of Kerosene Fu eled Capill ary-Fed Wi ck Stove', National Conference on

J-"Advances In En ergy Research, liT Bombay, 4-5 December 2006

M. Sharma and S. Praveen

S. Kakati, P. Mahanta, S.K. Kakoty ,/'

' Experim ental evaluation of melting furn ace performance and emission using prod uce r gas and di ese l fu el' , Proceed ings of 22nd Nati onal Convention of M echanical Engineers on En ergy Technologies - Strategies of Optim al Utilization of Natural Resources, 9-1 0 September 2006

'Perform ance analysis of pressurized kerosene stove with porous medium inserts', Journal of Scientific and Industrial Research aSIR), NISCAIR, 2006 (In Press)

P. M ahanta, S.c. Mishra and V.S. Khuswa 'Some studied on Fu el characteristi cs of Mesua ferrea', International Journal of Heat and Mass Transfer (In Press)

CONFERENCE PROCEEDINGS

International Conference

P. Kalita, U.S. Dixit, P. M ahanta and U. K. Saha 'Effect of Moisture and Temperature on Arecanut Leaf Sheath Products', 3rd BSME-ASME Intern ational Conference on Thermal Engineerin g, Dhaka, Bangladesh, 20-22 December 2006

S. Kakati, P. M ahanta, S.K. Kakoty ' Performance Evaluation of Pressure Stoves with Pl ant Oil and Kerosene Blend s', Intern ational conference on

124

L. Barbora and P. Kalita 'An in troduction to Fu el Cell Technology', Proceed in gs of 22nd National Convention of M echanical Engineers on Energy Technologies - Strategies of Optim al Utilizati on of Natural Resources, 9-10 September 2006

S. Ch atterj ee, P. Goswami, N.N. Dutta and L. Barbora 'Some Aspects of Bi odiesel Production from Jatropha Oil by Lipase Catalised Transesterification', Proceedings of 22nd National Convention of M echanical Engineers on En ergy Technologies - Strategies of Optim al Utilization of Natu ral Resources, 9-10 September 2006

S.R. Asth ana, R.S. Patil and R.K. Pati l ' Possibi lities of Conventional Fu el Conservation in Indian Cement Industry - A Case Study ', Proceed in gs of 22nd National Convention o f M echanica l Engineers on En ergy

Indian Institute of Technology Guwahati

Page 25: DEPARTMENT OF MECHANICAL ENGINEERING › pro › sites › default › files › AR_06-07_w-05.pdfProcessing, 20 (7), pp.1590-1614, 2006 R. Tiwari and N. Dharmaraju 'Identification

Technologies - Strategies of Optimal Utilization of Natu ral Resources, 9-10 Septem ber 2006

B.B. Sahoo, U.K. Saha and N. Sahoo 'Optimal Utilization of Mahua Oil M ethyl Ester as Biod iesel', Proceedings of 22nd National Convention of M echani cal En gineers on En ergy Technologies - Strategies of Optimal Util ization of Natural Resources, 9-10 September 2006

J. Purukayastha, T. Su gla, S. Soletti and L. Sahoo 'Micropropagation of Jatropha cu rcas L. - An important biofuel plant', 5th Intern ational Symposiu m on Fu els and Lubri cants, New Delhi , 7-10 M arch 2006

G.S. Paul and P. Agarwal 'Transport Properties Studies of the CdS Nanorods Thin Films Prepared by Thermal Evaporation Technique', DAE-Solid State Physics Symposium, Barkh atulla Universi ty, Bh opal, 26 -30 December 2006

OTHER PUBLICATIONS (BOOKS, CHAPTERS)

P. M ahanta Course M aterial prepared for IGNOU on Heat and M ass Transfer

V.S. M oholkar ' Prin cipl es of Fluidization', Curricu lum development programme report (CD Cell Project), pp. 251, October 2006

L. Sahoo and P.K. Jaiwal 'Genetic engineering of Vigna', C Kole, R. Scorza, T. C Hall (eds) Genome Mapping and Molecular Breeding in Plants, 3, Springer, USA (In Press)

L. Sahoo and S.K. Soletti ' Transgeni c techn o logy and i ts impli cations in th e improvement of crop and livestock diversity', Biodiversity and Environmental Biotechnology, P.O. Dwived i, S.K. Dwivedi and M .C Kalita (eds) Scientific Publishers, Jodhpur, India (In Press)

PAPERS PRESENTED IN CONFERENCES/ WORKS HOPS/ SYMPOSIA

S. Kakati ' Effect Of Heat Losses on Overall Perform ance of Kerosene Fu eled Capillary-Fed Wick Stove', National Conference on Advances In En ergy Research, liT Bombay, 4-5 December 2006

S. Kakati Intern ati onal conference on Challenges and strategies for sustainabl e energy, efficiency and environment, U.P. Technical University, Lu cknow, 10-11 June 2006

Annual Report 2006-2007

S. Chatterj ee 'Purification, immobili zati on and app li cat io n of a Pseudom onas lipase for transesterification o f lipid' , Intern ational Conference on Biofuel Visi on-2015, 13-1 5 October 2006

M.C Borah ' Improved Biogas Digester and Vermi compost Pl ant: An Economically Vi able Unit', Institu tions of En gineers (Indi a), Guwahati, 9-10 September 2006

S. Kakati 'Perform ance Enhancement of High Pressure Kerosene Stove Through Porous M edium Inserts', 22 nd National Convention of M echanical Engineers on En ergy Technologies - Strategies for Optim al Utilization of Natural Resources, Institu tions of Engineers (Indi a), Guwahati, 9-10 September 2006

M. Sharm a ' Experim ental evaluation of melting furnace performance and emissi o n usin g producer gas and di esel fu el ', Proceed in gs of 22nd Nati onal Convention of M echanical En gineers on Energy Technologies - Strategi es of Optim al Utilization of Natural Resources, Institutions of Engineers (Indi a) , Guwahati, 9-10 September 2006

L. Barbora 'An introduction to Fu el Cell Technology ', Proceed in gs of 22nd National Convention of M echanical Engineers on Energy Technologies - Strategies of Optim al Utilization of Natural Resources, Insti tutions of Engineers (India), Guwahati, 9-10 September 2006

S. Chatterjee 'Some Aspects of Bi odiesel Production from Jatropha Oil by Lipase Catalised Transesterifi cation', Proceedings of 22nd National Convention of M echanical Engineers on En ergy Technologies - Strategies of Optim al U ti lization of Natural Resources, Institutions of En gineers (India), Guwahati , 9-10 September 2006

R.K. Patil ' Possibili ties of Conventional Fu el Conservation in Indian Cement Industry - A Case Study', Proceed in gs of 22nd National Convention of M echanical Engineers on Energy Technologies - Strategies of Optim al Uti lization of Natural Resources, Institutions of En gineers (India), Guwahati, 9-10 Septem ber 2006

B.B. Sahoo 'Optimal Utilization of M ahua Oil M ethyl Ester as Biodiesel', Proceed in gs of 22nd National Convention of M echanical Engineers on En ergy Technologies-Strategies of Optim al Utilization of Natural Resources, Institutions of Engineers (India), Guwahati, 9-10 September 2006

125

Page 26: DEPARTMENT OF MECHANICAL ENGINEERING › pro › sites › default › files › AR_06-07_w-05.pdfProcessing, 20 (7), pp.1590-1614, 2006 R. Tiwari and N. Dharmaraju 'Identification

...

J. Purukayastha, T. Sugla, S. Bakshi, S. Solleti and L. Sahoo 'Rapid in vitro plant regeneration from nodal explant of Andrographis paniculata Nees-a valuable medicinal plant', National seminar on Biodiversity & Indigenous Knowledge System, Centre with Potential for Excellence in Biodiversity, Rajiv Gandhi University, Arunachal Pradesh, 25-26 October 2006

G.S. Paul, P.J. Sarmah, P.K. Iyer and P. Agarwal 'Synthesis and characterization of CdS nanoparticles doped poly (para phenylene)', International Conference of Mesoscopic and Disordered Materials MESODIS 06, liT Kanpur, 4-8 December 2006

G.S. Paul and P. Agarwal 'Optical and transport studies of CdS nanocomposites synthesized by various routes', International conference on Advanced Nano Materials ANM-2007, liT Bombay, 8-10 January 2007

CONFERENCES/WORKSHOPS/SYM POSIA ATTENDED

P. Mahanta Workshop on Nuclear Energy, Italy, 20-24 November 2006

S. Kakati National Conference on Advances In Energy Research, liT Bombay, 4-5 December 2006

S. Kakati International conference on Challenges and strategies for sustainable energy, efficiency and environm ent, U.P. Technical University, Lucknow, 10-11 June 2006

S. Chatterjee, L. Barbora, A.K. Kumar, P. Goswami, N.N. Dutta, P. Goswami International Conference on Biofuel Vision-2015, 13-15 October 2006

S. Chatterjee Workshop on Modelling Diagnostics and Control of pollutant formation and emission in combustion, Department of Power Engineering, Jadavpur University, 11-12 January 2007

S. Chatterjee 22nd National Convention of Mechanical Engineers on Energy Technologies - Strategies of Optimal Utilization of Natural Resources, 9-10 September 2006

M. Sharm a Technical Meet on Combustion, Bangalore, 27-28 June 2006

M. Sharma Chemcon, Ankleshwar, Gujarat, 27-30 December 2006

G.S. Paul International Conference on Advanced Nano Materials ANM-2007, liT Mumbai, 8-10 January 2007

G.S. Paul International workshop on Physics of Mesoscopic and Disordered Materials, liT Kanpur, 4-8 December 2006

126

B.B. Sahoo Workshop on Modelling Diagnostics and Control of pollutant form ation and emission in combustion, Department of Power Engineering, Jadavpur University, 11-12 January 2007

J.K. Sarmah, L. Borbora National Workshop cum Seminar on biodiesel for the North­Eastern Regi on, NED Fi, 1 7-1 9 October 2006

INVITED LECTURES OF OUR FACULTY

P. Mahanta as Keynote Speaker in the Internation al conference on Challenges and strategies for sustainable energy, effici ency and environm ent, U.P. Techni ca l University, Lu cknow, 10-11 June 2006

P. Mahanta, Invited Speaker in the National workshop cum seminar on biodiesel for the North-Eastern Region, organized by NEDFi, 17-19 October 2006

P. M ahanta, Invited Speaker in 22nd National Convention of M echanical Engineers on Energy Technologies - Strategies of Optimal Utilization of Natural Resources, 9-10 September 2006

P. Mahanta, Speaker, CNG and LPG Retrofitm ent in Automotive Engines, Sponsored by DONER, New Delhi , 8-9 M arch 2007

L. Sahoo, 'Micropropagation Technology for Biofuel Plants', National Workshop-cum-Exhibition on Bio-Diesel in North East, Guwahati, 17-19 October 2006

L. Sahoo, 'Genetic Engineering of Pulses for Biotic & Abiotic Stress Tolerance', Invited speaker and expert at Defence Agricultural Research Lab, Base Station, Haldwani for Workshop cum DARLs progress evaluation meeting on Biotechnology for High Altitud e Agricu lture, 12-1 3 November 2006

L. Sahoo, 'In Vitro Cloning of Biofuel Plants : Promise to Generate Commercial Scale Planting Material ', Nation al Workshop on Biofue l at National Institute for Rural Developmen t, Khanapara, Guwahati, 27-29 November 2006

V.S. Moholkar, Invited talk on Biomass Gasification for Rural Electrification, 7th MNES Program me on Renewable Energy for M edia Persons, NIRD, Guwahati, 3 November 2006

P. Kalita, Invited talk on Biogas Technology, Directorate of Rural Development, Nagaland

B. Buragohain, Invited Lecture in the workshop on FBC (Fluidized Bed Com bustion) Technology for Thermal Power Generation in the North East, Organized by NPTI, Ministry of Power, Guwahati , 12 January ·2007

Indian Institute of Technology Guwahati

Page 27: DEPARTMENT OF MECHANICAL ENGINEERING › pro › sites › default › files › AR_06-07_w-05.pdfProcessing, 20 (7), pp.1590-1614, 2006 R. Tiwari and N. Dharmaraju 'Identification

SHORT-TERM COURSES

MDONERsponsored short-term course on Capacity Building for Micropropagation and Genetic Engineering of Biofuel Plants, 15-20 January 2007

CNG and LPG Retrofitment in Automotive Engin es, Sponsored by DONER, New Delhi, 8-9 M arch 2007

SEMINARS/WORKSHOPS/CONFERENCES ORGANIZED

Co-organizer of the 22 nd National Convention of Mechan ical Engineers on Energy Technologies - Strategies of Optimal Utilization of Natural Resources, Guwahati, 9-10 Sept. 2006

AWARDS AND HONOURS

Awarded certificate of merit to S. Chatterjee, Research Scholar, for the research paper, 'Purification, immobilization and application of a Pseudomonas lipase for transesterification of lipid' in the International Conference on Biofuel Vision-2015, 13-15 October 2006

SPECIAL MENTION

P. Agarwal is a reviewer for the articles submitted to Journal of Non crysta lline Solids, an Elsevier journal.

P. Agarwal was the member of Local Organising Committee for the national conference 'Condensed Matter Days-2006', held at Department of Physics, Tezpur University, 29-31 August 2006.

Annual Report 2006-2007

FACULTY MEMBERS ASSOCIATED WITH THE CENTRE

P. Agarwal Physics

S.Dutta Civil Engineering

P. Goswami Biotechnology

P. Mahanta (Head of the Centre) Mechanical Engineering

S.c. Mishra Mechanical Engineering

V.S. Moholkar Chemical Engineering

U.K. Saha Mechanical Engineering

L. Sahoo Biotechnology

A. Verma Chemical Engineering

127

Page 28: DEPARTMENT OF MECHANICAL ENGINEERING › pro › sites › default › files › AR_06-07_w-05.pdfProcessing, 20 (7), pp.1590-1614, 2006 R. Tiwari and N. Dharmaraju 'Identification

CENTRE FOR THE ENVIRONMENT

INTRODUCTION

"Agenda 21" of the Earth Summit (United Nations Conference on Environment and Development held in June 1992 in Rio de Janeiro, Brazil attended by representatives from more than 150 nations including India) has identified environmental issues requiring topmost attention:

1. Changing consumption patterns of scarce natural resources. 2. Integrating environm ent and development into decision­making processes. 3. Promoting education, public awareness and training for mitigating environm ental problems.

The summit sets out a global consensus addressing th e pressi ng environm ental problems of today and aims at preparing the world for the challenges waiting ahead. Hence, it places great emphasis on the need for all sections of society to participate in working towards sustainable development - developm ent that meets the needs of the present without compromising th e ability of future generations to meet their own needs. Th erefore, every action at local level is equally vital for the continued economical and social development of the world without detriment to the environm ent and natural resources.

liT Guwahati visualises an active role for itself in dealing with new directions and concerns emerging from the mitigatory efforts of environmental problems of the day. In order to give a concrete shape to this visualization, liT Guwahati has established a full-fiedged centre - Centre for the Environment, which has started functioning since 17 May 2004.

Th e main objectives of the Centre for the Environment are to promote interdisciplinary research and development, to impart postgraduate ed ucation, to create public awareness and to train manpower for mitigating environmental problems.

ACADEMIC ACTIVITIES

The Centre has started the interdisciplinary research programme from th e academic year 2005-2006 leading to PhD degree with admission of 7 PhD students (5 full time and 2 part tim e) . 12 faculty members across various departments of the Institute are involved in providing gu idance. Th e broad area id entified for conducting interdisciplinary research are: Air Pollution and Dispersion Modelling, Air Po lluti on Control, Water Treatment, Wastewater Treatment, Solid Waste, Environm ental Bi oremed iati on/B i otech nology, Envi ronm en tal/G reen Chemistry, Environment Design, Stochastic M odelling.

128

STUDENT INTAKE

Three PhD students were admitted during th e year.

FACULTY/TECHNICAL STAFF STRENGTH

No faculty members are assigned to the Centre on full time basis during the reporting period, except th e Head of the Cen tre - Dr. M. Jawed, Associate Professor in the Department of Civil Engineering. In order to carry out th e activities of the Centre - such as planning and setting up of laboratori es, preparation of indents for procurement of equ ipments, development of curri cu lum for postgradu ate programme of studies to be offered by the Centre, etc., a committee was constituted comprising of th e foll owing facul ty members drawn from different departments:

Chairman

Dr. M. Jawed, Departm ent of Civil Engineering

Member

Dr. K. Pakshiraj an, Departm ent of Bi otechnology Dr. P. Ghosh, Departm ent of Chemical Engineerin g Prof. B.K. Patel, Departm ent of Chemistry Dr. C. M ahanta, Department of Civil Engineerin g Prof. P.G. Yammiyavar, Departm ent of Design Dr. M.K. Dutta, Department of Humanities and Social Sciences Dr. D.C. Dalal, Departm ent of Mathematics Dr. S.K. Kakaty, Departm ent of M echanical Engineering

In addition, two Scientific Offi cers (Grade - II) and one Technical Assistant were appointed on contract basis for a period of three years.

MAJOR EQUIPMENT AND FACILITIES

The Centre has procured and install ed th e foll owing major eq uipm ent/faciliti es during the reporting peri od: Gas Chromatograph, High Perform ance Liquid Chromatograph, UV-Visible Spectrophotom eter, Jar Test Apparatus, Peristalti c Pump, Gas fiow meter, Shaking Incubator, Bench Top Orbi tal Shaker, Ultra Pure Water Purificati on System, Trin ocular Laboratory Microscope with Digital Camera attachment, Visible Spectrophotometer, Muffle furnace, Wagner shaking machine, End over end rotary shaker, COD Reactor, BOD Incubator, etc. In addition, purchase order for procurement of Ion Chrom atograph, Atomic absorp tio n Spectrophotometer, Gel El ectrophoresis, Rotavapor and Ice Flacker have already been placed.

Internal partitioning work for analytical instruments laboratory and computational laboratory is completed and intern al electrical wiring of both the laboratori es is under progress. Th e internal networking work for th e computati onal

Indian Institute of Technology Guwa hati

Page 29: DEPARTMENT OF MECHANICAL ENGINEERING › pro › sites › default › files › AR_06-07_w-05.pdfProcessing, 20 (7), pp.1590-1614, 2006 R. Tiwari and N. Dharmaraju 'Identification

laboratory is also under progress. Installation of HPLC and UV-Visible is completed. Opening of new research lab II is also under process.

CONSULTANCY

Title: Technical opinion related with Main Stack and Gas Cleaning System Client: India Carbon Ltd. Guwahati Principal Investigator: M. Jawed Co-investigator: S.B. Gokhale

Title: Technical opinion on Suitability of Water Samples for Construction Purposes Consultant: M. Jawed

CONFERENCE PROCEEDINGS

National

D. Deka, S. Bharali, M. Jawed, CM.G.A. Fontes and A. Goyal 'Molecular cloning, expression and characterization of a bifunctional cellulase from Clostridium thermocellum', Proceedings of the 75 th Annual Meeting of the Society of Biological Chemists of India, pp. 42 -43, JNU, New Delhi, 8-11 December 2006

S. Sen, V.V. Dasu, B. Mandai 'Studies on Effect of Physical Parametrs on Production of Alkaline Protease from Tannery Waste Soil Isolate - a statistical approach', CHEMCON 2006, pp. 152, IIChe, Ankaleswar, Gujrat, 27-30 December 2006

PAPERS PRESENTED IN CONFERENCES/ WORKSHOPS/SYMPOSIA

National

D. Deka, S. Bharali, M. Jawed, CM.G.A. Fontes and A. Goyal 'Molecu lar cloning, expression and characteri zation of a bifunctional ce llul ase from Clostridium thermocellum', Proceedings of the 75 th Annual Meeting of th e Society of Biological Chemists of India, pp. 42 -43, JNU, New Delhi, 8-11 December 2006

S. Sen, v.v. Dasu, B. Mandai 'Stud ies on Effect of Physical Parametrs on Production of Alkalin e Protease from Tannery Waste Soil Isolate - a statistical approach', CHEMCON 2006, pp. 152, IIChe, Ankaleswar, Gujrat, 27-30 December 2006

CONFERENCES/WORKSHOPS/SYMPOSIAATTENDED

National

Mr. P. Hazarika participated in a seminar-cum -in teractive session on VARIAN Atomic Spectroscopy Products and Technology on 5 May 2006 held at Kolkata, organised by Varian India Pvt. Ltd.

Mr. P. Hazarika participated in a short-term course on Ambient Air and Source Emission Monitoring and Management held

An nual Report 2006-2007

during 1-2 March 2007 at Guwahati organ ised by Envirotech Instruments Pvt. Ltd., New Delhi.

SEMINARS/WORKSHOPS/CONFERENCES ORGANIZED

Co-organized 'Seeds of Chang: The Earth Charter and Human Potential' - An Exhibition, 7-15 October 2006 at ITA Complex, Machkhowa in association with Bharat Soka Gakkai, Guwahati.

FACULTY MEMBERS ASSOCIATED WITH THE CENTRE

S. Chakraborty Civil Engineering

M.K. Chaudhuri Chemistry

D.C. Dalal M athematics

G. Das Chemistry

V.V. Dasu Biotechnology

M.K. Dutta Humanitiesand Social Sciences

A.K. Ghosal Chemical Engineering

P. Ghosh Chemical Engineering

P. K. Ghosh Civil Engineering

S.B. Gokhale Civil Engineering

A. Goyal Biotechnology

M. Jawed (Head of the Centre) Civil Engineering

S.K. Kakaty Mechanical Engineering

C. Mahanta Civil Engineering

B.P. Mandai Chemical Engineering

K. Pakshirajan Biotechnology

B.K. Patel Chemistry

M.K. Purkait Chemical Engineering

P.G. Yammiyavar Design

129

Page 30: DEPARTMENT OF MECHANICAL ENGINEERING › pro › sites › default › files › AR_06-07_w-05.pdfProcessing, 20 (7), pp.1590-1614, 2006 R. Tiwari and N. Dharmaraju 'Identification

CENTRE FOR NANOTECHNOLOGY

INTRODUCTION

The year 2006-2007 ushered in important developments at the Centre for Nanotechnology. The basic physical infrastructure (construction) of laboratory, as planned for the initial stage of development, is now nearly complete. The year also witnessed the procurement and installation of a few sophisticated equipment like Scanning Probe Microscope (as a part of sponsored research project), UV­VIS spectrophotometer, Dynamic light Scattering based Particle Size Analyzer and Planetary Ball mill. The Transmission Electron Microscope (TEM) along with samp le preparation unit and Ultramicrotome has been purchased pardy through a sponsored project and partly from the funds of the Central Instruments Facilities. The installations of the equipment are currently under progress. Order for several other sophisticated equipment have also been placed. The facilities available at the Centre are currently being utilized by members of the Centre as well as various Departments and other Centres and by academic institutions of the Northeast India. The PhD programme in Nanotechnology is continuing with five students. One of the primary aims of the Centre is the research collaborations that are interdisciplinary in nature. In that respect the Centre has made initial progress in terms of collaborations with other departments. The Centre also offered four courses at the postgraduate level in the field related to Nanoscale Science and Technology. Students from the Centre and academic departments have registered for the courses.

The year also marked the beginning of implementation of various research projects at the Centre. One research project (worth about Rupees two crores) has been approved by the Department of Science and Technology (Government of India) and is going to be implemented through the Centre for Nanotechnology. A Superconducting Quantum Interference Device (SQUID) will be procured under the above project grant. Faculty and staff members associated with the Centre have submitted several new research projects to appropriate funding agencies.

The students forum 'Corral' of the Centre have been organizing Chalk the Talk every week. Several speakers from different disciplines related to nanoscience and nanotechnology were invited to deliver the talks. A few BTech students have carried out their BTP work at the Centre for Nanotechnology. Currently some BTech students are working at the Centre. As a part of academic growth, faculty members, staff and students associated with the Centre delivered lectures at several conferences and symposia. Overall, during the previous year, the Centre witnessed

130

significant growth in various aspects of academ ic and research activiti es.

ACAD EMIC ACTIVITI ES

In the academic year 2006-2007, two students were admitted in to the PhD programme in the Centre. The Centre offered the following courses in the last semester (August to December 2006):

1. Quantum Mechanics and Spectroscopy (NT 701). Instructed by: S. Basu and A. Chattopadhyay

2. Instrumentation for Nanotechnology (NT 730). Instructed by: H.B. Nemade and P.K. Giri

The following courses are running in the current semester Uanuary to April 2007):

1. Recent Advances in Nanotechnology (NT 705). Instructed by: A. Chattopadhyay

2. Practical Quantum Mechanics and its applications (NT 704). Instructed by: S. Basu

STUDENTS INTAKE

PhD: 02

FACULTY STRENGTH

Presently, there are no core faculties recruited at the Centre. However, there are four faculty members from different Departments who are associated with the Centre for Nanotechnology. In addition, there are additional five facu lty members who are actively collaborating with the Centre. Further, there are four faculty members who are also participating either in writing grant (at the institutional level for large grant) or pursuing research work in collaboration with the Centre.

MAJOR EQUIPMENT AND FACILITIES

The following equipment have been purchased and installed in the Centre: Scanning Probe Microscope (sponsored project), High Quality Water Purifier, X-ray diffraction (XRD) Measurement System, FEMLAB Multi-Physics Software, Precision Balance, Particle Size distribution Analyzer, UV­VIS Spectrophotometer, Planetary Ball mill, Ultrasonic Cleaning Bath, Digital Camera, LCD Projector, Deep Freezer, Hot air Oven, Hot plate with Magnetic Stirrer, De-ionizer, Vacuum Coating Unit(both Thermal Evaporation and Electron Beam Deposition). Moreover, a common laboratory has been set up with computers, laser printers and scanner.

Indian Institute of Technology Guwahati

Page 31: DEPARTMENT OF MECHANICAL ENGINEERING › pro › sites › default › files › AR_06-07_w-05.pdfProcessing, 20 (7), pp.1590-1614, 2006 R. Tiwari and N. Dharmaraju 'Identification

The purchase orders for the following equipment have been placed : 50 MHz Digital-An alog Oscilloscope, 20 MHz Functional Generator, Triple Output DC power Supply, Lock­in Ampl ifie r, Electromagnet, Trinocu lar mi croscope, Autoclave, Electrophoresis System, UV-Transilluminator, Horizontal Laminar Hood, Refrigerated Centrifuge, Micro­Centrifuge, PH -Meter, Micropipette, Incubator, Incubator Shaker, Rotavapor, Vacuum Pumps

RESEARCH AND DEVELOPMENT ACTIVITIES

A new project 'Novel Nanoscale Materials: Generation, Characterization, and Device Applications' has been approved and awaiting sanction of fund from DST under NSTI (Nano Science and Technology Initiative) programme. The Centre, represented by the advisory committee and other associated facu lty members, is fosterin g research growth in the areas of submicron-scale lithography, hydrogel systems, carbon nanotubes, surface acoustic wave (SAW) based devices, magnetic systems and nanobiotechnology. A patent has been filed and a new patent application has also been submitted to TIFAC, New Delhi.

SPONSORED PROJ ECTS

Title: Development of Stimuli Sensitive Nanogelsl Nanoparticles for Controlled Release System Principallnvestigator/Coordinator: A. Khan Sponsoring Agency: DST Amount Sanctioned: Rs.10 lakh Status: Under Progress

Title: Newer Chemical and Physical M ethods of Engin eering Devices with Nanoscale Functional Components Principal lnvestigatorl Coordinator: A. Chattopad hyay Sponsoring Agency: DST Amount Sanctioned: Rs.92lakh Status: Under Progress

Title: Engineering Nanoscale Materials and their Applications in nanotechnology Principallnvestigator/Coordinator: A. Chattopadhyay Sponsoring Agency: DST Amount Sanctioned: Rs.2.02 crore Status: Under Progress

PUBLICATIONS

International Journal

B.R. Panda, P.N . Rao, A. Paul and A. Chattopadhyay 'Electrochemical actuation of growing copper dendrimers in water', J. Phys. Chem. B, 110 (45), pp . 22917-22922, 2006

S.K. Gogoi, P. Gopinath, A. Paul, A. Ramesh, S.S. Ghosh and A. Chattopadhyay 'Green Fluorescent Protein Expressing Escherichia coli as a model system for investigating the Antimicrobial activities

Annual Report 2006-2007

of Silver Nanoparticl es', Langmuir, 22 (22), pp. 9322-9328, 2006

S. Manikandan, G. Majumdar, D. Chowdhury, A. Paul and A. Chattopadhyay 'Solid-state Storage of Ag Nanoparticl es in Anion Exchange Resin Beads and Th ei r Recovery', Journal of Colloid and Interface Science , 295 (1), pp. 148-154, 2006

G. M ajumdar, S.K. Gogoi, A. Paul and A. Chattopadhyay 'Lithography for Imprinting Colored Patterns with Quantum Dots', Langmuir, 22 (7), pp. 3439-3444, 2006

S. Srivastav, M. Kar and S. Ravi ' Linear and Non Linear ac Susceptibility studies in La(Mn,. xCu)O/, J. Magn. Magn. Mat., 307, pp. 318-324, 2006

M. Kar, S.M. Borah and S. Ravi 'Study of Electrical Transport and M agnetic Properti es in CaMn" XCuX0 3" Mat. Scien. & Eng. B, 129, pp. 54-58, 2006

M. Kar, A. Perumal and S. Ravi 'Critical behaviour studies in La, _xAg.Mn03 Double-Exchange Ferromagn et', Physica Status Solid B, 243, pp. 1908-1913, 2006

M. Kar and S. Ravi 'Electrical Resistivity and ac Susceptibility Studi es in Sr,. xLaxMnO/, Mod. Phys. Lett. B, 20, pp. 1517-1528, 2006

CONFERENCE PROCEEDINGS

N. Rama Krishnan, R.P. Paily and H.B. Nemade 'Design of SAW based biosensor for heavy metal ion detection', Proc. of In tern ational Symposium on Nano-Bi o Interface, Kolkata, 1-3 March 2006

N. Rama Krishnan, H.B. Nemade and R.P. Paily 'Modelling and analysis of SAW based liquid sensors', Eighth Intern ational Conference on Nanostructured M aterials, Bangalore, 20-25 August 2006

N. Rama Krishn an, H.B. Nemade and R.P. Paily 'Simulation of one port SAW resonator using COMSOL Mul tip hysics', COMSOL Conference, Bangalo re, 17 Novem ber 2006

P.K. Giri , S. Bhattacharyya, B. Chetia, P.K. Iyer, B.K. Panigrahi and K.G.M. Nair 'Nove l low temperatu re chemica l synthesis and characte rization of zin c oxide nanostru ctures', Proc. Intern ational Conference on Advanced Nanom eterials, Bombay, January 2007

O.K. Singh, P.K. Iyer and P.K. Giri 'I mproved chemical synthesis o f multiwalled carbon nanotubes', Proc. International Conference on Advanced Nanometerials, Bombay, January 2007

131

Page 32: DEPARTMENT OF MECHANICAL ENGINEERING › pro › sites › default › files › AR_06-07_w-05.pdfProcessing, 20 (7), pp.1590-1614, 2006 R. Tiwari and N. Dharmaraju 'Identification

/

D.K. Singh, P.K. Iyer and P.K. Giri 'Functionalization of Carbon nanotubes and study of its optical and structural properties', International conference on Nanotechnology- Material and Methods (CIT -NANOTECH 2006), Coimbatore, July 2006

K. Datta, S. Kumari, D.K. Singh and P.K. Giri 'Synthesis and studies of isolated germanium nanoparticles in the quantum confinement regime', Proc. International Conference on Lasers and Nanomaterials (lCLAN), Kolkata, November 2006

P.K. Giri, P.K. Patel, c.J. Panchal, S. Bhattacharyya, S. Kumari, D.K. Singh, VA Kheraj, N.M. Shah, P.D. Vakil, K.J. Patel, M.S. Desai, B.R. Rehani, V.J. Rao, R.R. Desai, D. Lakshminarayana, P.B. Patel 'Studies on Zinc Oxide Nanorods Grown Electron Beam Evaporation Technique', Proc. International Conference on Nano-materials for electronics (lCNME-2006), Pune, November 2006

S.K. Srivastava, M. Kar and S. Ravi 'Effect of Co Substitution on Crystal Structure and Magnetic

Property of Lao.s~&.,sMn' oyCop3 (y = 0 to 1) Compounds', Proc. of DAE Solid State Symposium, 51, pp. 851,2006

S.K. Srivastava, M. Kar and S. Ravi ' Electrical Transport and Magnetic Properties on Lao.s~&.,s(Mn'oyAly)03 Compound', PANE-2007, GU, 1-2 March 2007

M. Kar and S. Ravi 'Spin Glass Behaviour Studies in (La,oxCu)Mn03', PAN E-2007, GU, 1-2 March 2007

S.K. Srivastava, M. Kar and S. Ravi

' Crystal Structure Studies on Lao.ssAgo.,sMn,oyAly03 Compounds', NSC-36, Universily of Madra, 22-24 January 2007

M. Kar, I. Talukdar and K. Acharyya 'Crystal Structure Studies on Nanocrystalline LaMn'oyCoy0 3 Compounds', PANE-2007, GU, 1-2 March 2007

PAPERS PRESENTED IN CONFERENCES

K. Datta, S. Kumari, D.K. Singh and P.K. Giri 'Synthesis and studies of isolated germanium nanoparti cles

,...in the quantum confinement regime', International Conference on Lasers and Nanomaterials (lCLAN), Koikata, November 2006

P.K. Giri, S. Bhattacharyya, B. Chetia, P.K. Iyer, B.K. Panigrahi and K.G.M. Nair 'Novel low temperature chemical synthesis and characterization of zinc oxide nanostructures', International

/ Conference on Adv. Nanometerials, Bombay, January 2007

D.K. Singh, P.K. Iyer and P.K. Giri 'Improved chemical synth esis of multiwalled carbon nanotubes', Internation al Conference on Advanced Nanometerials, Bom bay, January 2007

132

M. Kar, I. Talukdar and K. Acharyya 'Crystal Structure Studies on Nanocrystalline LaMn, .yCoy0 3

'-Compounds', PANE-2007, GU, 1-2 March 2007

M. Kar and S. Ravi ;Spin Glass Behaviour Studies in (La,oxCu)Mn03', PANE-2007, GU, 1-2 March 2007

CON FERENC ES/WO RKS HO PS/SYM POS IA ATTENDED

P.K. Giri attended the International Conference on Lasers and Nanomaterials (lCLAN), Kolkata, November 2006.

P.K. Giri attended the International Conference on Advanced Nanometerials (ANM-2007), Bombay, January 2007

INVITED LECTURES OF FACULTY AND STAFF

A. Chattopadhyay

(a) Indo-US Fron tiers of Science Symposium, Irvine, USA, 18-20 January 2007

(b) Indo-UK Symposium on Smart Materials, New Delhi, 31 January - 1 February 2007

(c) Invited lecture for scientists under the FastTrack Research Schemes (Department of Science and Technology) at Kolkata on 22 May 2006

(d) Several Lectures at Gauhati University, RRL Jorh at, Regional Science Centre, Guwahati and at a School in Tura (sponsored by National Academy of Sciences)

N. Rama Krishnan 'Modelling MEMS using COMSOL Multiphysics', Workshop/ Training at CMERI (Du rgapur), 5-6 February 2007

M. Kar 'Magnetism in Nanocrystalline Materials', Sibsagar College, Sivasagar, 5 Decem ber 2006

PATENT FILED

A. Chattopadhyay, A. Singh and P.N. Rao 'Evaporation Induced Lithography ', Patent Application Submitted, October 2006

P.K. Iyer, P.K. Giri, S. Bhattacharyya, B. Chetia 'Method to synthesize nano sized zinc oxide', Indian Patent Application No. 563/K01/2006

AWARDS AND HONOURS

A. Matthew, a research scholar of the Centre, has been awarded a National Doctoral Fellowship by AICTE.

N. Rama Krishnan, a research scholar of the Centre, received the best paper presentation award in the COMSOL Multiphysics user Conference, Bangalore, 17 November 2006

Indian Institute of Technology Guwahati

Page 33: DEPARTMENT OF MECHANICAL ENGINEERING › pro › sites › default › files › AR_06-07_w-05.pdfProcessing, 20 (7), pp.1590-1614, 2006 R. Tiwari and N. Dharmaraju 'Identification

SPECIAL MENTION

A. Chattopadhyay was selected as a member of the Project Revi ew and Steering Group for the Project entitl ed, 'Nanoelectronics Centres' at the Indian Institute of Science, Bangalore and Indian Institute of Technology Bombay by Ministry of Communication and Information Technology, Government of India (2006).

P.K. Giri was selected as a member, technical Advisory Committee, Intern ation al Conference on Emerging Mechanical Technology, Macro to Nano, 16-18 February 2007.

Annual Report 2006-2007

FACULTY MEMBERS ASSOCIATED WITH THE CENTRE

A. Chattopadhyay (Head of the Centre) Chemistry

P.K. Giri Physics

S.S. Ghosh Biotechnology

H. Nemade Electronics and Communication Engineering

133