ÇİĞDEM DİNÇKAL (PhD) - İnşaat Mühendisliği Bölümüce.cankaya.edu.tr/dosyalar/pdf/cigdem_dinckal_cv.pdfÇiğdem Dinçkal(PhD)_CV 4/12 Dinçkal Ç., Finite Element Model for

Çiğdem Dinçkal(PhD)_CV 1/12

ÇİĞDEM DİNÇKAL (PhD)

ÖZGEÇMİŞ

Ünvan: Doçent.

İş Adresi: Çankaya Üniversitesi,

İnşaat Mühendisliği Bölümü, N-A09,

Yukarıyurtçu Mahallesi Mimar Sinan Caddesi

No:4, 06790, Etimesgut, Ankara, Turkey.

Tel: +90-312-233 1405,

E-mail: [email protected],

[email protected].

Öğrenim Durumu:

Derece Bölüm/Program Üniversite Mezuniyet

Yılı

Lisans Endüstri Mühendisliği

(Şeref Derecesi)

Çankaya Üniversitesi 2004

Yüksek

Lisans

Mühendislik

Bilimleri/Hesaplamalı

Mekanik

Orta Doğu Teknik Üniversitesi 2008

Doktora Mühendislik

Bilimleri/Hesaplamalı

Mekanik

Orta Doğu Teknik Üniversitesi 2010

Araştırma Alanları

Hesaplamalı mekanik, Uygulamalı Matematik, Tensor, Tensor Cebiri, Varyasyonel

Prensipler, Nümerik Analiz, Sonlu Eleman Modellemesi.


Tez

Yüksek Lisans Tez Başlığı:

Bounds on the Anisotropic Elastic Constants.

Doktora Tez Başlığı:

Decomposition of Elastic Constant Tensor into Orthogonal Parts.

Bilgisayar Bilgisi&Yetenekleri

Windows 95, 98, 2000-2016, NT, XP and 7, 8, 10.

MS Office (Word, Excel, MACRO, VBA, PowerPoint, Access, FrontPage and

Outlook) .

Latex, Scientific Workplace, TechDig.

SIMAN, Gams, Lindo, Lingo, EViews, Minitab, Arena, Expert-Fit, SPSS.

MATLAB, MATHCAD, MATHEMATICA, Fortran and Pascal.

Web Page Design (Adobe Dreamweaver CS5.5, FileZilla).

Diğer yazılımlar (Internet Explorer, Chrome, Adobe Acrobat Reader, Adobe Photoshop.)

AutoCAD.

Ödüller

Service award given by World Congress on Engineering 2013, The 2013

International Conference of Mechanical Engineering.

Service awards given by Faculty of Engineering, Çankaya University (2013)

Certificate of Merit for The 2012 International Conference of Applied and

Engineering Mathematics (Award given by World Congress on Engineering),

London, 2012.

High honour and honour degrees. (2001-2004)

Kitap Bölümleri

Dinçkal Ç., ''Harmonic Decomposition of Elastic Constant Tensor and Crystal

Symmetry'', In: Transactions on Engineering Technologies-Special Volume of

the World Congress on Engineering 2013, Springer, 2014.

Dinçkal Ç., ''On the Properties of Piezoelectric Materials Based upon

Orthonormal Representations'', In: IAENG Transactions on Engineering

Sciences, CRC Press / Balkema (Taylor & Francis Group), 2014.

http://link.springer.com/book/10.1007%2F978-94-017-8832-8

http://link.springer.com/book/10.1007%2F978-94-017-8832-8


Uluslararası ve Ulusal hakemli dergilerde yayınlanan makaleler

Dinçkal, Ç., Design of integral spreadsheet calculator, Computer Applications

in Engineering Education, Vol. 26 (5), Special Issue:SI, pp.1159-1172, 2018.

(SCI index-Expanded)

Dinçkal, Ç., Initial Value Problems spreadsheet solver using VBA for

engineering education, Fundamental Journal of Mathematics and Applications,

Vol 1 (1), pp. 88-101, 2018.

Dinçkal, Ç., Vibration of Initially Stressed Nonlocal Euler-Bernoulli Nano-

Beams, Academic Platform-Journal of Engineering and Science (APJES), Vol.

6 (1), pp. 127-141, 2018. (index by Ulakbim)

Dinçkal , Ç., Töreyin, B.U., Küçükali, S. Adaptive decision fusion based

framework for short-term wind speed and turbulence intensity forecasting: case

study for North West of Turkey, Turkish Journal of Electrical Engineering &

Computer Sciences, Vol 25, pp. 2770-2783, 2017. (SCI index-Expanded)

Dinçkal, Ç., New predictor-corrector type iterative methods for solving

nonlinear equations, Sakarya University Journal of Science, Vol 21 (3), pp.

463-468, 2017 (index by Ulakbim)

Dinçkal, Ç., Finite element modeling for vibration of initially stressed nonlocal

Euler-Bernoulli beams, CBU J. of Sci., Vol 12 (3), pp. 399-411, 2016. (index

by Ulakbim)

Dinçkal, Ç., Alemdar B.N, Gülkan P.H., Dynamics of a beam-column element

on an elastic foundation, Canadian Journal of Civil Engineering, Vol 43 pp.

685-701, 2016. (SCI index-Expanded)

Dinçkal, Ç., Free vibration analysis of carbon nanotubes by using finite element

method, Iranian Journal of Science and Technology, Transactions of

Mechanical Engineering, Vol. 40 (1), pp. 43-55, 2016. (SCI index-Expanded)

Kucukali, S., Dinçkal, Ç., Wind energy resource assessment of Izmit in the

West Black Sea Coastal Region of Turkey, Renewable and Sustainable Energy

Reviews, Vol. 30, pp.790-795, 2014. (SCI index)

Dinçkal Ç., On the properties of anisotropic engineering materials based upon

orthonormal representations, IAENG International Journal of Applied

Mathematics, Vol.42, 3, pp.183-192, 2012. (Special Issue)


Dinçkal Ç., Finite Element Model for a viscous incompressible fluid flow,

Elixir Computer Sciences and Engineering, 43, pp.6599-6601, 2012.

Dinçkal Ç., A new decomposition method for elastic constant tensor to study

the anisotropy of construction materials; tool steel and rock types, Elixir

Applied Mathematics 39, pp.5090-5092, 2011.

Dinçkal Ç., Adaptation of Generalized Hill Inequalities to anisotropic elastic

symmetries, International Journal of Engineering Science and

Technology,Vol.3, No.4, pp.185-212, 2011.

Dinçkal Ç., Studies on the optimum mechanical response of anisotropic

material related to elastic constants, Journal of Innovative Research in

Engineering and Science, Vol. 2. Issue 3, pp.203-237, 2011.

Dinçkal Ç., Analysis of elastic anisotropy of wood material for engineering

applications, Journal of Innovative Research in Engineering and Science, Vol.

2. Issue 2, pp.67-80, 2011.

Dinçkal Ç., ‘Norm, Norm ratio calculations and anisotropy degree’, Journal of

Pure and Applied Mathematics, Vol. 69. No.2, pp.125-136, 2011. (Scopus

index)

Dinçkal Ç., ‘Orthonormal decomposition of symmetric second rank tensors’,

International Journal of Pure and Applied Mathematics, Vol. 65. No.2, pp.225-

241, 2010. (Scopus index)

Dinçkal Ç., Akgöz C.Y., ‘Decomposition of elastic constant tensor into

orthogonal parts’ International Journal of Engineering, Science and

Technology, Vol. 2, No. 6 pp.22-46, 2010.

Ulusal Konferans Sunumları

Dinçkal Ç., Alemdar B., Gülkan P., ''Dynamics of a Beam-Column Element on

Pasternak Foundation: Shape Functions and Stiffness Matrix'', Engineering

and Technology Symposium 8 (MTS8), 14-15 May, 2015, Çankaya University,

Ankara, Turkey.

Dinçkal Ç., ''Kayaçlarda Elastik Sabit Tensörün Ortogonal Ayrıştırılması ve

Sismik Anizotropi Açısından Önemi'', Zemin Mekaniği ve Temel Mühendisliği


15. Ulusal Kongresi (ZM.15), 16-17 October, 2014, Middle East Technical

University, Ankara, Turkey.

Dinçkal Ç., Alemdar B., Gülkan P., ''Exact Finite Element for Beam-Column

Element on Elastic Winkler Foundation Subjected to Vibration'', Engineering

and Technology Symposium 7(MTS7), 15-16 May, 2014, Çankaya University,

Ankara, Turkey.

Dinçkal Ç., ''Spectral Representation of Elastic Compliance Tensor for

Anisotropic Materials'', Engineering and Technology Symposium 6(MTS6),

25-26 April, 2013, Çankaya University, Ankara, Turkey.

Dinçkal Ç., ''Elastisite Tensörünün Ortogonal Bileşenelerine Ayrılması ve

Uygulamaları'', Pop Physics Seminars, 4 November, 2010, Ankara University,

Ankara, Turkey.

Ulusal Konferans Bildirileri

Dinçkal Ç., Alemdar B., Gülkan P., ''Dynamics of a Beam-Column Element on

Pasternak Foundation: Shape Functions and Stiffness Matrix'', Engineering and

Technology Symposium 8 (MTS8), Çankaya University, Ankara, Turkey,

ISBN:978-975-6734-17-9.

Dinçkal Ç., ''Kayaçlarda Elastik Sabit Tensörün Ortogonal Ayrıştırılması ve

Sismik Anizotropi Açısından Önemi'', Zemin Mekaniği ve Temel Mühendisliği

15. Ulusal Kongresi (ZM.15), Cilt 1, pp. 173-182, Middle East Technical

University, Ankara, Turkey.

Dinçkal Ç., Alemdar B., Gülkan P., ''Exact Finite Element for Beam-Column

Element on Elastic Winkler Foundation Subjected to Vibration'', Engineering

and Technology Symposium 7 (MTS7), Çankaya University, Ankara, Turkey,

ISBN:978-975-6734-16-2.

Dinçkal Ç., ''Spectral Representation of Elastic Compliance Tensor for

Anisotropic Materials'', Engineering and Technology Symposium 6 (MTS6),

Çankaya University, Ankara, Turkey, ISBN:978-975-6734-15-5.


Uluslararası Konferans Sunumları

Dinçkal Ç., “Finite Element Analysis of Nano Scale Vibration of Microtubules

in Living Cells: Nonlocal Euler Bernoulli Beam Modelling”, International

Workshop on Mathematical Methods in Engineering 2017 (MME 2017), 27-29

April 2017, Çankaya University, Ankara, Turkey.

Alemdar B.N., Dinçkal Ç., “Dynamic Stability of Planar Frames Supported by

Elastic Foundation ” 2016 SSRC Annual Stability Conference, 12-15 April,

2016, Orlando, Florida.

Dinçkal Ç., "A Study on Anisotropy of Composites and Nanomaterials Used in

Construction Industry", International Conference on Civil and Environmental

Engineering (ICOCEE 2015), 20-23 May, 2015, Cappadocia, Turkey, 2015.

Dinçkal Ç., "A Study for Anisotropy of Porous and Powder Materials from a

Different Perspective: ‘Use of Orthonormal Parts of Elastic Constant Tensor’",

International Porous and Powder Materials Symposium and Exhibition (PPM

2013), 3-6 September, 2013, Çeşme, İzmir, Turkey, 2013.

Dinçkal Ç., "On the Mechanical and Elastic Properties of Anisotropic

Engineering Materials Based upon Harmonic Representations", World

Congress on Engineering 2013 (WCE 2013); The 2013 International

Conference of Mechanical Engineering, 3-5 July, 2013, London, U.K.

Dinçkal Ç., "Orthonormal Decomposition of Third Rank Tensors and

Applications", World Congress on Engineering 2013 (WCE 2013); The 2013

International Conference of Applied and Engineering Mathematics, 3-5 July,

2013, London, U.K.

Dinçkal Ç., ''Irreducible Representation of Elastic Compliance Tensor for

Engineering Materials'', 10th

International Congress on Advances in Civil

Engineering (ACE), 17-19 October, 2012, METU, Ankara, Turkey.

Dinçkal Ç., "An Innovative Description of Elastic Constant Tensor Based upon

Orthonormal Representations", World Congress on Engineering 2012 (WCE

2012); The 2012 International Conference of Applied and Engineering

Mathematics, 4-6 July, 2012, London, U.K.

https://www.aisc.org/WorkArea/linkit.aspx?LinkIdentifier=id&ItemID=41992



Dinçkal Ç., "Irreducible Decomposition of Elastic Constant Tensor for

Anisotropic Engineering Materials", 14th

International Symposium; Materials,

Methods & Technologies, 11-15 June, 2012, Sunny Beach, Burgas, Bulgaria.

Uluslararası Konferans Bildirileri

Alemdar B.N., Dinçkal Ç., “Dynamic Stability of Planar Frames Supported by

Elastic Foundation ” Proceedings of the Annual Stability Conference Structural

Stability Research Council, 1-20, Orlando, Florida, 2016.

Dinçkal Ç., "A Study on Anisotropy of Composites and Nanomaterials Used in

Construction Industry", International Conference on Civil and Environmental

Engineering (ICOCEE 2015), 886-894, Cappadocia, Turkey, 2015. (CD)

Dinçkal Ç., "A Study for Anisotropy of Porous and Powder Materials from a

Different Perspective: ‘Use of Orthonormal Parts of Elastic Constant Tensor’

", Proceedings of International Porous and Powder Materials Symposium and

Exhibition (PPM 2013), 727-731, ISBN: 978-975-6590-05-8, İzmir, Çeşme,

Turkey.

Dinçkal Ç., "On the Mechanical and Elastic Properties of Anisotropic

Engineering Materials Based upon Harmonic Representations ", Proceedings

of the World Congress on Engineering 2013 (Lecture Notes in Engineering and

Computer Science), Vol. III, ISSN: 2078-0958, Organizing Association:

IAENG, WCE 2013.

Dinçkal Ç., "Orthonormal Decomposition of Third Rank Tensors and

Applications", Proceedings of the World Congress on Engineering 2013

(Lecture Notes in Engineering and Computer Science), Vol. 1, 139-144, ISSN:

2078-0958, Organizing Association: IAENG, WCE 2013.

Dinçkal Ç., ''Irreducible Representation of Elastic Compliance Tensor for

Engineering Materials'', 10th

International Congress on Advances in Civil

Engineering (ACE), 17-19 October, 2012, METU, Ankara, Turkey.(CD)

Dinçkal Ç., "An Innovative Description of Elastic Constant Tensor Based upon

Orthonormal Representations", Proceedings of the World Congress on

Engineering 2012 (Lecture Notes in Engineering and Computer Science), Vol.

1, 187-193, ISSN: 2078-0958, Organizing Association: IAENG, WCE 2012.




Dinçkal Ç., "Irreducible Decomposition of Elastic Constant Tensor for

Anisotropic Engineering Materials", Journal of International Scientific

Publications: Materials, Methods & Technologies, Vol. 6, Part 1, ISSN:1313-

2539, 2012.

Yönetilen Tezler

Haşemoğlu K. E., Toplu yerleşim alanlarının şantiyelerindeki iş kazalarına

neden olabilecek risklerin analizi, Yüksek Lisans Tezi, İş Sağlığı ve Güvenliği

Bölümü, Fen Bilimleri Enstitüsü 2018.

Bölümde Üstlenilen Görevler

Lisans dersleri ve programı koordinatörü

Akademik danışmanlık

Çift-anadal ve yandal koordinatörü

Staj komite üyesi.

Üniversite-Sanayi komite üyesi.

İş Sağlığı ve Güvenliği Bölümü yüksek lisans sınavları jüri üyesi, 2018.

İnşaat Mühendisliği Bölümü yüksek lisans sınavları jüri üyesi, 2016.

Bilgisayar Mühendisliği ve Bilişim Teknolojileri Bölümlerinde Tez Jüri

Üyeliği, 2016.

Tanıtım Günleri 2011, 2012, 2013, 2014, 2015, 2016, 2017 Yaz.

Bölüm tanıtımı (17 Nisan 2014).

Bölüm tanıtımı (1 Mart 2014).

Meslek tanıtım günleri 2013. (31 Ocak 2013, 28 Şubat 2013, 14 Mart 2013, 29

Mart 2013, 11 Nisan 2013, 8 Mayıs 2013)

Diğer Üstlenilen Görevler

Gazi Üniversitesi, İnşaat Mühendisliği Bölümünde Tez Jüri Üyeliği, 2018

(öğrenci:Yaşar Erbaş)

Gazi Üniversitesi, İnşaat Mühendisliği Bölümünde Doktora Yeterlilik Sınavı,

2016

TUBİTAK MAG 1001 Değerlendirme Panel, Panelist, Aralık 2015


Mühendislik ve Teknoloji Sempozyumu 8 bilimsel danışma kurul üyeliği.

Mühendislik ve Teknoloji Sempozyumu 7 bilimsel danışma kurul üyeliği.

Mühendislik ve Teknoloji Sempozyumu 6 organizasyon komite üyeliği.

Dergi&Konferans Hakemliği:

The Second International Conference on Mechanical, Electric and Industrial

Engineering, MEIE 2019.

Journal of Advances in Mathematics and Computer Science (2018)

Mathematical and Computational Applications (2018)

Computer Applications in Engineering Education (SCI-expanded) (2018)

Challenge Journal of Structural Mechanics (2018)

Süleyman Demirel University Journal of Natural and Applied Sciences

SDU (Süleyman Demirel Fen Bilimleri Enstitüsü Dergisi) (2016 ve 2017)

ÇANKAYA UNIVERSITY JOURNAL OF SCIENCE AND ENGINEERING

(2016)

International Journal of Biomathematics (IJB, 2015, 2016 ve 2018)

Journal of Tropical Forest Science (JTFS, 2015)

A) Uluslararası Konferanslar:

World Congress on Engineering 2016, The 2016 International

Conference of Applied and Engineering Mathematics, IAENG, London,

U.K. (tam metin hakemliği)










B) Ulusal Konferans/Sempozyum:

http://www.sciencedomain.org/journal/68


Engineering and Technology Symposium 8, Çankaya University,

Ankara, Turkey (tam metin hakemliği)





C) Konferans/Sempozyum Oturum Başkanlığı:

World Congress on Engineering 2013, WCE Keynote Speech II,

IAENG, Imperial College, London, U.K.


Conference of Mechanical Engineering, ICME I, IAENG, Imperial

College, London, U.K.

World Congress on Engineering 2013, WCE Keynote Speech III,

IAENG, Imperial College, London, U.K.

Engineering and Technology Symposium 5, Mechanical and Civil

Engineering _Session 1, Çankaya University, Ankara, Turkey, 2012.

Verdiğim Dersler

A) Lisans Dersleri:

CE 301-İnşaat Mühendisleri için Nümerik Yöntemler

CE 331-Yapım İşletmesi

CE 222-Mühendislik Mekaniği: Dinamik

CE 302-İnşaat Mühendisliğinde Bilgisayar Uygulamaları

CE 332- İnşaat Mühendisliğinde Proje Yönetimi

CE 426- Yapı Mekaniğinde Sonlu Elemanlar

CE 102-İnşaat Mühendisliğine Giriş

MTS 412-Mühendislikte Sonlu Elemanlar Yöntemi, Bahar 2010-2011.

(Ankara Üniversitesi, Mühendislik Fakültesi)

B) Yüksek Lisans Dersleri:

CE 501- İnşaat Mühendisliğinde Analitik Yöntemler

CE 502- İnşaat Mühendisliğinde İleri Nümerik Yöntemler


ISG 599-Tez

Verebileceğim Diğer Dersler

A) Lisans Seviyesi:

Statik

Statik ve Mukavemet

Cisimlerin Mekaniği

Mühendisler için İstatistiksel Yöntemler

Lineer Cebir

Diferansiyel Denklemler

B) Yüksek Lisans Seviyesi:

Elastisite Teorisi

Mühendislikte Varyasyonel Yöntemler

Elastisitede Varyasyonel Yöntemler

Sürekli Ortamlar Mekaniği Teorisi

Mühendislikte Analitik Yöntemler

Mühendislikte İleri Nümerik Yöntemler

PDE'lerin Nümerik Çözümü

ODE'lerin Nümerik Çözümü

Kompozit Malzemelerin Mekaniği

İş Tecrübesi

2018 Aralık- Çankaya Üniversitesi, İnşaat Mühendisliği Bölümü

(Doçent)

2011 Temmuz- 2018 Kasım, Çankaya Üniversitesi, İnşaat Mühendisliği

Bölümü

(Yardımcı Doçent)

2011 Ocak-2011 Haziran- Ankara Üniversitesi, Mühendislik Fakültesi

(Yarı zamanlı Dr. Öğretim Görevlisi)


Bilimsel ve Profesyonel Üyelikler

Earthquake Engineering Association of Turkey,

International Association of Engineers (IAENG)

Kentmer

Solid Mechanics

Computational & Applied Mathematicians

Science, Technology & Innovation Policy

Mathematicians

European Science, Technology & Innovation Policy

Documents

ÇİĞDEM DİNÇKAL (PhD) - İnşaat Mühendisliği Bölümüce.cankaya.edu.tr/dosyalar/pdf/cigdem_dinckal_cv.pdfÇiğdem Dinçkal(PhD)_CV 4/12 Dinçkal Ç., Finite Element Model for