-
[04.2
016]
Mod. 0809 2016-08 Rev.7
Delta SW LE910-EU1 and LE910 EU V2 Products
80519DSW10146A Rev. 0 – 2018-01-10
-
80519DSW10146A Rev. 0 Page 2 of 14 2018-01-10
SPECIFICATIONS ARE SUBJECT TO CHANGE WITHOUT NOTICE
NOTICE
While reasonable efforts have been made to assure the accuracy
of this document, Telit assumes no liability resulting from any
inaccuracies or omissions in this document, or from use of the
information obtained herein. The information in this document has
been carefully checked and is believed to be reliable. However, no
responsibility is assumed for inaccuracies or omissions. Telit
reserves the right to make changes to any products described herein
and reserves the right to revise this document and to make changes
from time to time in content hereof with no obligation to notify
any person of revisions or changes. Telit does not assume any
liability arising out of the application or use of any product,
software, or circuit described herein; neither does it convey
license under its patent rights or the rights of others. It is
possible that this publication may contain references to, or
information about Telit products (machines and programs),
programming, or services that are not announced in your country.
Such references or information must not be construed to mean that
Telit intends to announce such Telit products, programming, or
services in your country.
COPYRIGHTS
This instruction manual and the Telit products described in this
instruction manual may be, include or describe copyrighted Telit
material, such as computer programs stored in semiconductor
memories or other media. Laws in the Italy and other countries
preserve for Telit and its licensors certain exclusive rights for
copyrighted material, including the exclusive right to copy,
reproduce in any form, distribute and make derivative works of the
copyrighted material. Accordingly, any copyrighted material of
Telit and its licensors contained herein or in the Telit products
described in this instruction manual may not be copied, reproduced,
distributed, merged or modified in any manner without the express
written permission of Telit. Furthermore, the purchase of Telit
products shall not be deemed to grant either directly or by
implication, estoppel, or otherwise, any license under the
copyrights, patents or patent applications of Telit, as arises by
operation of law in the sale of a product.
COMPUTER SOFTWARE COPYRIGHTS
The Telit and 3rd Party supplied Software (SW) products
described in this instruction manual may include copyrighted Telit
and other 3rd Party supplied computer programs stored in
semiconductor memories or other media. Laws in the Italy and other
countries preserve for Telit and other 3rd Party supplied SW
certain exclusive rights for copyrighted computer programs,
including the exclusive right to copy or reproduce in any form the
copyrighted computer program. Accordingly, any copyrighted Telit or
other 3rd Party supplied SW computer programs contained in the
Telit products described in this instruction manual may not be
copied (reverse engineered) or reproduced in any manner without the
express written permission of Telit or the 3rd Party SW supplier.
Furthermore, the purchase of Telit products shall not be deemed to
grant either directly or by implication, estoppel, or otherwise,
any license under the copyrights, patents or patent applications of
Telit or other 3rd Party supplied SW, except for the normal
non-exclusive, royalty free license to use that arises by operation
of law in the sale of a product.
-
80519DSW10146A Rev. 0 Page 3 of 14 2018-01-10
USAGE AND DISCLOSURE RESTRICTIONS
I. License Agreements
The software described in this document is the property of Telit
and its licensors. It is furnished by express license agreement
only and may be used only in accordance with the terms of such an
agreement.
II. Copyrighted Materials
Software and documentation are copyrighted materials. Making
unauthorized copies is prohibited by law. No part of the software
or documentation may be reproduced, transmitted, transcribed,
stored in a retrieval system, or translated into any language or
computer language, in any form or by any means, without prior
written permission of Telit
III. High Risk Materials
Components, units, or third-party products used in the product
described herein are NOT fault-tolerant and are NOT designed,
manufactured, or intended for use as on-line control equipment in
the following hazardous environments requiring fail-safe controls:
the operation of Nuclear Facilities, Aircraft Navigation or
Aircraft Communication Systems, Air Traffic Control, Life Support,
or Weapons Systems (High Risk Activities"). Telit and its
supplier(s) specifically disclaim any expressed or implied warranty
of fitness for such High Risk Activities.
IV. Trademarks
TELIT and the Stylized T Logo are registered in Trademark
Office. All other product or service names are the property of
their respective owners.
V. Third Party Rights
The software may include Third Party Right software. In this
case you agree to comply with all terms and conditions imposed on
you in respect of such separate software. In addition to Third
Party Terms, the disclaimer of warranty and limitation of liability
provisions in this License shall apply to the Third Party Right
software. TELIT HEREBY DISCLAIMS ANY AND ALL WARRANTIES EXPRESS OR
IMPLIED FROM ANY THIRD PARTIES REGARDING ANY SEPARATE FILES, ANY
THIRD PARTY MATERIALS INCLUDED IN THE SOFTWARE, ANY THIRD PARTY
MATERIALS FROM WHICH THE SOFTWARE IS DERIVED (COLLECTIVELY “OTHER
CODE”), AND THE USE OF ANY OR ALL THE OTHER CODE IN CONNECTION WITH
THE SOFTWARE, INCLUDING (WITHOUT LIMITATION) ANY WARRANTIES OF
SATISFACTORY QUALITY OR FITNESS FOR A PARTICULAR PURPOSE. NO THIRD
PARTY LICENSORS OF OTHER CODE SHALL HAVE ANY LIABILITY FOR ANY
DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
DAMAGES (INCLUDING WITHOUT LIMITATION LOST PROFITS), HOWEVER CAUSED
AND WHETHER MADE UNDER CONTRACT, TORT OR OTHER LEGAL THEORY,
ARISING IN ANY WAY OUT OF THE USE OR DISTRIBUTION OF THE OTHER CODE
OR THE EXERCISE OF ANY RIGHTS GRANTED UNDER EITHER OR BOTH THIS
LICENSE AND THE LEGAL TERMS APPLICABLE TO ANY SEPARATE FILES, EVEN
IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.
-
80519DSW10146A Rev. 0 Page 4 of 14 2018-01-10
APPLICABILITY TABLE
PRODUCTS
LE910-EU1
LE910-EU V2
-
80519DSW10146A Rev. 0 Page 5 of 14 2018-01-10
CONTENTS
NOTICE 2
COPYRIGHTS
..................................................................................................
2
COMPUTER SOFTWARE COPYRIGHTS
....................................................... 2
USAGE AND DISCLOSURE RESTRICTIONS
................................................ 3 I. License
Agreements
.......................................................................
3 II. Copyrighted Materials
....................................................................
3 III. High Risk Materials
........................................................................
3 IV. Trademarks
....................................................................................
3 V. Third Party Rights
...........................................................................
3
APPLICABILITY TABLE
..................................................................................
4
CONTENTS
......................................................................................................
5
1. INTRODUCTION
............................................................................
6
2. DELTA SW 20.00.XX2 – 20.00.XX3
.............................................. 8 New Features
.................................................................................
8 General Enhancements
................................................................
10
3. DOCUMENT HISTORY
................................................................
13
-
80519DSW10146A Rev. 0 Page 6 of 14 2018-01-10
1. INTRODUCTION 1.1. Scope Scope of this document is to detail
the corrections, changes or enhancements made to the software of
Telit modules.
1.2. Audience This document is intended for Telit customers.
1.3. Contact Information, Support For general contact, technical
support services, technical questions and report documentation
errors contact Telit Technical Support at:
• [email protected] • [email protected] •
[email protected]
Alternatively, use:
http://www.telit.com/support
For detailed information about where you can buy the Telit
modules or for recommendations
on accessories and components visit:
http://www.telit.com
Our aim is to make this guide as helpful as possible. Keep us
informed of your comments
and suggestions for improvements.
Telit appreciates feedback from the users of our
information.
mailto:[email protected]:[email protected]:[email protected]://www.telit.com/supporthttp://www.telit.com/
-
80519DSW10146A Rev. 0 Page 7 of 14 2018-01-10
1.4. Related Documents
• Telit LE910-V2 Modules AT Commands Reference Guide,
80446ST10707A • Telit's Modules Software User Guide, 1vv0300784
-
80519DSW10146A Rev. 0 Page 8 of 14 2018-01-10
2. DELTA SW 20.00.XX2 – 20.00.XX3 New Features
Description SW 20.00.xx3
AppZone: implemented new m2m_ssl API that allow to set right TLS
protocol (TLS1.0/TLS1.1 and TLS1.2)
•
AppZone: implemented new API m2m_ipraw_cfg for IPRAW IPV4 and
IPV6
•
AppZone: implemented API to support AUXILIARY UART •
AppZone: implemented new API for Watchdog management •
AppZone: implemented new API to set context on specified CID
•
AppZone: implemented new API m2m_hw_sleep_mode_cfg to manage
power saving mode
•
AppZone: support for easyAT •
Support TLS1.2 •
Support CFUN9 - Incoming GPRS packed wake-up the DUT •
EasyIP: Increase number of sockets from 6 to 10 •
AT#MTUSIZE=: implemented new AT command in order to set the MTU
size
•
MBIM: support multiple bearer connection in parallel •
AT#APPSSLCFG implemented AT command to configure cipher suite,
authentication level and TLS version for a maximum of 5
applications.
•
Added storing of SMS in ME and SM memories •
AT+CMAR/AT#CMAR: Implemented AT command to format NVM and File
system
•
-
80519DSW10146A Rev. 0 Page 9 of 14 2018-01-10
AT#IIDIPV6=,: Implemented AT command in order to set the IID to
a certain CID
•
AT#MBIMCFG: implemented AT command to configure CID to be used
for MBIM connection
•
AT#PDPAUTH: implemented AT command to set the authentication
parameters for all CIDs
•
AT#RXTOGGLE: Implemented AT command to set main or diversity
antenna, command used in test mode for certification purpose
•
AT+IPR: Updated UART speed up to 3Mbps •
-
80519DSW10146A Rev. 0 Page 10 of 14 2018-01-10
General Enhancements
Type Description SW 20.00.xx3
ID#32982 Improvement in the report of AT+CSQ and AT+CESQ, adjust
RSSI calculation.
•
ID#34680 Manage properly NCM disconnection (AT#NCMD=0) and
dialup when they are used together
•
ID#35612 Updated the +CCLK: time zone range to “-96…+96” •
ID#27164 Fix on received URL #DTMFEV with DTMF enabled •
ID#32272 Support +CRSM=192,28423 with a SIM with PIN enabled
•
ID#35240 Improvement on storing #HSMICG in the extended
profile
•
ID#30283 Restored LTE neighbor information’s in AT#MONI and
AT#MONIZIP, added and for serving cell
•
ID#33206 restored timers T3402 and T3412 in AT#RFSTS •
ID#34984 Developed standard usage of “[]:” for IPv6 address,
example AT#FTPOPEN=”[ipv6_addr]:port_num
•
ID#35119 Added timestamp on +CMT unsolicited in incoming PDU
•
ID#35123 Added conversion table from ISO Latin 8-bit to
PCCP437
•
ID#34464 Antenna detection: Fixed behavior of repGPIO on
AT#GSMAD
•
ID#33872 STN: 254 not always received when performing a SAT
request with Vodafone: implemented a better handling for SIM APP
END indication
•
-
80519DSW10146A Rev. 0 Page 11 of 14 2018-01-10
ID#34313 Removed SIM switch off when CFUN=4 is issued to avoid
IMS registration issue once CFUN=1 is used again. SIM remains
active
•
ID#34343 Fixed reply Time on AT#PING; it was not aligned to
timeout configured.
•
ID#32164 Improvement on AT#CSURV scan of 4G channel without
SIM
•
ID#34236 #PSNT Corrected handling of technology indication: it
reported a wrong network type when EGPRS •
ID#33195 AppZone: Improvement on #HTTPRCV to reports OK if
called from virtual com •
ID#30588 Improvement on AT+CRSM locking up the AT interface if
SIM doesn’t include specific folder •
ID#33155 MBIMCFG has been extended to allow the selection of
both CID 1 and CID 3
•
ID#33721 Removed DCD glitch when module received an incoming
data call
•
ID#30330 Improvement on command AT+CMGL="ALL", it has been
extended to cover also the 5th AT instance that is available only
in SMSATRUN and TCPATRUN
•
ID#32401 #CMUXMODE=1 - CFUN=5 correctly managed on virtual
channel by DTR toggle
•
ID#32227 Improvement on AT#CSURV to avoid missing MCC/MNC in LTE
scan response if the same cell is shared by two PLMNs (MOCN
support)
•
ID#23686 Reduce timing to configure GPIOs status during startup
of the system
•
ID#33045 DW Cloud: improvements to support Method execution
request parameters with var in a multiselect string
•
ID# 31957 FIREWALL: improvement on storing the disable/enable
setting in NVM
•
-
80519DSW10146A Rev. 0 Page 12 of 14 2018-01-10
ID#29202 Improvement on-off procedure to make sure that 5
seconds on-off are always enough to power on the module after a FW
upgrade and in all other scenarios
•
ID#31001 MBIM command DEVICE_CAPS reports the same version
string as AT+CGMR •
ID#30878 I2C Clock Stretching support •
-
80519DSW10146A Rev. 0 Page 13 of 14 2018-01-10
3. DOCUMENT HISTORY
Revision Date Changes
0 2018-01-10 Delta SW 20.00.xx2 - 20.00.xx3
-
[04.2
016]
Mod. 0809 2016-08 Rev.7
NoticeCopyrightsComputer Software CopyrightsUsage and Disclosure
RestrictionsAPPLICABILITY TABLECONTENTS1. Introduction1.1.
Scope1.2. Audience1.3. Contact Information, Support1.4. Related
Documents
2. DELTA SW 20.00.XX2 – 20.00.XX32.1. New Features2.2. General
Enhancements
3. Document History
