Delphi XM SkyFi2 Satellite Radio Manual

  • Upload
    kapok

  • View
    237

  • Download
    0

Embed Size (px)

DESCRIPTION

Delphi XM SkyFi2 Satellite Radio Manual .

Citation preview

  • Delphi Corporation1441 West Long Lake RoadTroy, Michigan 48098-5090U.S.A.Customer Service: [1] 877.GO DELPHI

    www.delphi.com

    Printed on Recycled Paper2004 Delphi Corporation. All rights reserved.DPSS-04-E-064

    The SKYFi2 name, XM name, TuneSelect, and relatedlogos are trademarks of XM Satellite Radio Inc.

  • GuideUser

    SKYFi2Radio Satellite

    Receiver

    Warning: This manual and the SKYFi2 Installation Guide contain important safety andoperating information. Please read and follow the instructions in these manuals. Failure to do socould result in personal injury, death, and/or damage to your SKYFi2 Receiver, accessories,and/or to your vehicle or other property.

  • This device complies with Part 15 of the FCC rules.Operation is subject to the following two conditions:1. This device may not cause

    harmful interference, and2. This device must accept any

    interference received, includinginterference that may causeundesired operation.

    WelcomeThank you for purchasing a DelphiXM SKYFi2 Satellite Radio Receiver.Your SKYFi2 gives you access to over130 XM Satellite Radio channels ofmusic, news, and information fromcoast to coast.*

    2

    *XM subscription required for reception of XM service. Not available in Alaska or Hawaii.

    The Delphi XM SKYFi2 SatelliteRadio Receiver incorporates anFM transmitter and is thereforeclassified as an intentional trans-mitter. Changes or modificationsto the unit not expressly approvedby Delphi can void your authorityto operate this equipment.

    Important: The FCC and FAAhave not certified the Delphi XMSKYFi2 Satellite Radio Receiverfor use in any aircraft (neitherportable nor permanent installa-tion). Therefore, Delphi cannotsupport this type of application or installation.

  • SKYFi2 improves upon the award-winning SKYFi Satellite Radio Receiverby offering these new features: Built-in FM wireless modulator.

    Listen to XM through any nearbyFM radio without using any wires.

    30-Minute Replay. Pause and replay up to 30 minutes of live XM broadcast.

    TuneSelect. Find your favoritesongs by song title or artist name if theyre currently playing on anyXM channel.

    Personalized stock and sports tickers. Track your favorite stocksand sports scores on your SKYFi2sdisplay while listening to yourfavorite music.

    A brighter, white LED backlit displayfor even better visibility.

    More versatile vehicle mountingoptions than previous model.

    Caution: Your SKYFi2 must be used with the enclosed connecting devices or other approved accessoriesto ensure maximum performance. Do not modify or alter wires or connections in any way. Shorteningwires or connections may prevent proper functioning of the electrical circuit, which may damage yourreceiver and will void your warranty.

    3To use the SKYFi2 Satellite RadioReceiver, you must have a VehicleAdaptor Kit (SA10102), Home AdaptorKit (SA10103), or Marine Adaptor Kit(SA10046), or Delphi portable audiosystem (each sold separately). We donot recommend using the old SKYFiVehicle Adaptor Kit (SA10002) withthe SKYFi2 Receiver since the SA10102 has been designed to maximize the performance of SKYFi2.

  • About DelphiDelphi is a worldwide leader in mobileelectronics, vehicle components, andaudio technology. Delphi created thefirst in-dash car radio in 1936 and con-tinues its strong tradition of innovationin the audio industry. Now Delphitechnology has helped make satelliteradio a reality, and Delphi continuesto expand its in-vehicle and consumerelectronics technologies. With its excitingline of satellite radio products, Delphioffers a broad portfolio of products toanswer a wide variety of informationand entertainment needsin the vehicle, home, office, or anywhere.

    About XMOne big idea can change everything.And XM Satellite Radio is one bigidea: Radio to the Power of X.Americas most popular satellite radioservice offers over 130 digital channelsof sheer variety: music, sports, talk,comedy, drama, news, traffic andweather, kids programming, and more.All 68 XM music channels are 100 per-cent commercial-free, and XMs instanttraffic and weather channels provide themost comprehensive, in-depth infor-mation on traffic incidents, delays, androad conditions available on radio.These services are available for a lowmonthly subscription, and additionaldevices may qualify for a reduced feethrough the XM Family Plan*.

    *XM subscription required for reception of XM service.Not available in Alaska or Hawaii.

    4

  • 5ContentsGetting Started

    Activating Your SKYFi2 . . . . . . . . . 6

    SKYFi2 ReceiverControls . . . . . . . . . . . . . . . . . . . . . 7Display Screen . . . . . . . . . . . . . . . . 8Remote Control . . . . . . . . . . . . . . . 9

    Basic OperationsTurning SKYFi2 On and Off . . . . 10Selecting Channels . . . . . . . . . . . 10Changing the Display . . . . . . . . . 12Memorizing Song Information . . 13

    Advanced FeaturesListening to XM Using Any

    FM Radio . . . . . . . . . . . . . . . . . . 14Adjusting the Audio Level . . . . . 15Auto-On . . . . . . . . . . . . . . . . . . . . 16Adjusting the

    Brightness and Contrast . . . . . 16Auto-Off and Sleep Timer . . . . . . 16Aiming the Home Antenna . . . . . 17TuneSelect . . . . . . . . . . . . . . . . . . 18Stock Ticker . . . . . . . . . . . . . . . . . 19Info Extras . . . . . . . . . . . . . . . . . . 2030-Minute Replay . . . . . . . . . . . . . 20Recall Last Channel . . . . . . . . . . . 21Direct Tune . . . . . . . . . . . . . . . . . . 22Search . . . . . . . . . . . . . . . . . . . . . . 22

    Skipping Channels While Tuning . 24Setting the Clock . . . . . . . . . . . . . 25Restoring Factory Defaults . . . . . 25Setting the Display Screen Mode . . 26

    ReferenceCare of Your SKYFi2 . . . . . . . . . . 27Accessories . . . . . . . . . . . . . . . . . 27Troubleshooting . . . . . . . . . . . . . . 28Contacting Technical Support

    and Customer Service . . . . . . . 30Technical Information . . . . . . . . . 30

    WarrantyDelphi Limited Consumer

    Warranty . . . . . . . . . . . . . . . . . . 30

  • 6Warning: Failure to properly follow allinstallation instructions could result in personalinjury, death, and/or damage to your SKYFi2Receiver, accessories, and/or to your vehicle orother property.

    Warning: When using this product it isalways important to keep your eyes on the roadand your hands on the wheel. Failure to do socould result in personal injury, death, and/ordamage to your SKYFi2 Receiver, accessories,and/or to your vehicle or other property.

    Gettin

    g S

    tarte

    d

    Getting StartedActivating Your SKYFi2To quickly begin enjoying XMSatellite Radio with your SKYFi2, follow these simple steps:1. Set up your SKYFi2 Receiver using

    the installation instructions includedin the SKYFi Home Kit, SKYFiVehicle Kit, Delphi XM SKYFiMarine Kit, any of the availableaudio systems, or with the help ofa professional installer.

    2. Press to turn on your SKYFi2and verify that it is playing channel1, the XM Preview channel.

    3. Select channel 0. The receiverseight-character XM Satellite RadioID will appear on the display.Write the ID here:

    Note: Carefully check your XM Radio ID. The letters I, O, S, and F are not used.

    4. Activate your XM Satellite Radioservice. To subscribe, make sureyou have your XM Satellite RadioID and a major credit card. ContactXM at http://activate.xmradio.comor by calling 1.800.XM.RADIO(1.800.967.2346).

    5. After subscribing, make sure youkeep your receiver on for at leastone hour in order to complete theactivation process. The process iscomplete when you can access thefull channel lineup on your SKYFi2.

  • 7SK

    YFi2

    Receive

    r

    Figure 1. SKYFi2 Receiver.

    SKYFi2 Receiver Receiver ControlsUse your SKYFi2 control buttonsto operate various functions.

    30-Minute Replay buttonsPause and replay up to 30 minutes of live XM broadcast.

    Number keysEnter a channel directly orselect your favorite presets.Jump button

    Switches between currentand previous channel.

    Search buttonChanges search modebetween search by category or search byscanning.

    Preset/direct buttonSelects between direct channelentry or up to 30 presets.

    Menu buttonSelects and changesconfiguration options.

    Memory buttonSaves and recalls songinformation such as artistand song title.

    Display buttonDisplays additionalinformation on screensuch as stocks orsports scores.

    Power buttonPowers SKYFi2 on and off.

    XM buttonConfirms selected channel ormenu option.

    Scroll wheelPreviews channels; alsoselects various menu options.

  • 8SK

    YFi2

    Receive

    r

    Display ScreenWhile tuned to an XM channel, theSKYFi2 default display contains information about that channel andthe SKYFi2 settings. See figure 2.

    Your SKYFi2 display can be customized. See the Basic Operationssection, beginning on page 10.

    Figure 2. SKYFi2 Receiver display screen.

    Signal strengthindicator (zero to three bars)

    Mode (DIRECT, Preset A,Preset B, or Preset C)

    Additional information(such as stocks orsports tickers)

    Artist name

    Song title

    Channel numberChannel name

    Category nameor clock

    Indicates that internal FM modulator isturned on and set to an FM frequency

  • 9SK

    YFi2

    Receive

    r

    Remote Control

    Figure 3. SKYFi2 Remote Control.

    Power buttonPowers SKYFi2 on and off.

    30-Minute Replay buttonsPause and replay up to 30 minutes of live XM broadcast.

    Channel buttonPreviews channels; also selects various menuoptions.

    XM buttonConfirms selected channel or menu option. Pushand hold to select song or artist for TuneSelect.

    Search buttonChanges search mode between search by categoryor search by scanning.

    Mute buttonMutes the audio.

    +- buttonsImmediately select a different channel (and control volume in some audio systems).

    Jump buttonSwitches between current and previous channel.

    Preset/direct buttonSelects between direct channel entry or up to 30 presets.

    Number keysEnter a channel directly or select your favorite presets.

    Memory buttonSaves and recalls song information such as artistand song title.

    Display buttonChanges the display mode, providing a differentappearance and additional information such asstocks or sports scores.

  • 10

    Basic

    Opera

    tions

    Warning: When using this product it isalways important to keep your eyes on the roadand your hands on the wheel. Failure to do socould result in personal injury, death, and/ordamage to your SKYFi2 Receiver, accessories,and/or to your vehicle or other property.

    Basic OperationsTurning SKYFi2 On and Off1. To turn on: press .2. To turn off: press and hold for

    2 seconds.

    If SKYFi2 is installed in a vehicle, youmay use the ignition key to powerSKYFi2 on or off. This will not affectSKYFi2 in any way.

    Selecting ChannelsYou may select channels by using thescroll wheel, by pushing one of the pre-set buttons, or by keying in the channelnumber directly. You can also use theequivalent buttons on the remote control.

    Using the Scroll Wheel1. Turn the scroll wheel.2. When you find your desired

    channel, press the XM button to select it.

    You can also set up SKYFi2 so that youdo not have to press the XM buttonto select a channel. See Direct Tune(page 22).

  • 11

    Basic

    Opera

    tions

    Direct Entry1. Press the preset/direct button

    until the DIRECT icon appears inthe display.

    2. Press the number keys correspond-ing to the channel number. Forexample, for channel 31, press 3 followed by 1. You canselect the channel faster by pressing the XM button afterentering the channel number.

    Using PresetsThere are 30 presets in all: Each bank(A, B, and C) holds 10 presets. Pressthe preset/direct button to selectthe proper bank. Use these banks toorganize your favorite channels or to create separate preset banks foradditional users to enjoy.

    To set a channel preset:1. Tune to the desired channel.2. Press the preset/direct button

    until the appropriate Preset icon(preset bank A, B, or C) appears inthe display.

    3. Press and hold the number keythat corresponds to the preset youwould like to set. SKYFi2 beepswhen the channel is stored.

    To select a stored preset:1. Press the preset/direct button

    until the appropriate Preset icon(preset bank A, B, or C) appears inthe display.

    2. Press one of the number keys.SKYFi2 will tune to that channel.

    Note: If a number key is pressed that hasnot been assigned to a favorite channel,SKYFi2 will automatically tune to channel 1or the XM Preview channel, reminding youto make a selection.

  • 12

    Basic

    Opera

    tions

    Changing the DisplayPress the display button to selectany one of four screens.

    Display Option 4Large display of artist and song title

    Display Option 3Scrolls information extras at bottom of screen

    Display Option 2Scrolls stock ticker at bottom of screen

    Display Option 1Default display

    Figure 4. SKYFi2 screen displays.

  • 13

    Basic

    Opera

    tions

    Memorizing Song InformationSKYFi2 can remember the artist nameand title of the song or programmingyou are currently listening to.1. Press and release the memory

    button to save the information ofthe current song or program.SKYFi2 can remember up to 20entries, after which any new infor-mation that is saved will replacethe oldest entry in memory.

    2. To recall saved information, pressand hold the memory button for3 seconds. Turn the scroll wheel oruse the up and down buttons onthe remote to view the entire listof songs or programs.

  • 14

    Adva

    nced F

    eatu

    res

    Advanced FeaturesListening to XM Using Any FM RadioSKYFi2 has a built-in wireless FMmodulator that transmits the XM audio signal to any nearby FM radio.You can use the wireless FM modulatorin a vehicle, in your home, in anoffice, or even on a boat using theappropriate kit.

    1. Make sure your SKYFi2 is turnedoff. Unplug any accessory fromSKYFi2s audio jack.

    2. Turn on an FM radio and place itclose to your SKYFi2.

    3. Tune the FM radio to each of thefollowing FM frequencies: 88.1, 88.3, 88.5, 88.7, 88.9, 106.7,106.9, 107.1, 107.3, 107.5, 107.7,and 107.9.

    4. Note the frequency that has no FMstation or the least amount ofinterference.

    5. Turn on your SKYFi2.6. Press the menu button.7. Use the scroll wheel to select

    FM Frequency. Press the XMbutton to confirm.

    8. Use the scroll wheel to select thefrequency noted in step 4. Pressthe XM button to confirm.

    9. Press the menu button to returnto the main menu and then againto return to the play screen.

    10. You should now hear XM program-ming over your FM radio. If thesound is not clear or you hear interference or static, try another frequency by repeating the processabove.

    Note: If you are not using the wireless FMmodulator, set the FM frequency to FM Offfor the best audio quality.

  • 15

    Adva

    nced F

    eatu

    res

    Note: If you are traveling long distances, youmay need to repeat this procedure periodicallyif you hear interference from local FM stations.This is due to the differences in the strengthof FM stations being broadcast in theseareas, and not to any problems associatedwith your SKYFi2.

    In the rare situation that you cannot find an acceptable open FM frequency,consult a professional audio installer.You may improve the audio quality by using the Delphi FM Direct Adaptor(SA10112), sold separately.

    Adjusting the Audio LevelThe factory default setting shouldwork well in most situations.However, if you hear distortion, youshould decrease the audio level. If theXM audio level is too low comparedto other sources such as CD, cassette,or other FM stations, you may want toincrease the audio level.1. Press the menu button.2. Use the scroll wheel (or remote) to

    select Audio Level. Press theXM button to confirm.

    3. Use the scroll wheel (or remote) toselect the desired level. Press theXM button to confirm selection.

    4. Press the menu button to returnto the main menu and then againto return to normal operation.

    Note: This is not a volume control. Thisfeature should be used to better match theSKYFi2 audio level with the other audiosources in the receiver. Set the volumeusing the audio system or FM radio connected to your SKYFi2.

  • 16

    Adva

    nced F

    eatu

    res

    Auto-OnNormally, SKYFi2 turns on wheneverit receives power. If SKYFi2 is wired toa power source that is always on, youshould disable the Auto-On option:1. Press the menu button.2. Use the scroll wheel (or remote) to

    select Auto-On. Press the XMbutton to confirm selection.

    3. Select Off. Press the XMbutton to confirm selection.

    4. Press the menu button to returnto the main menu and then againto return to normal operation. Youmust now use the button toturn SKYFi2 on or off.

    Adjusting the Brightness and Contrast1. Press the menu button.2. Use the scroll wheel (or remote) to

    select Brightness or Contrast.Press the XM button.

    3. Use the scroll wheel (or remote) toselect the desired level. Press theXM button to confirm.

    4. Press the menu button to returnto the main menu and then againto return to normal operation.

    Auto-Off and Sleep TimerYou can set SKYFi2 to automaticallyshut off between 15 minutes to threehours after your last input or action.Use this feature if SKYFi2 continuesto receive power even after youremove the ignition key; setting Auto-Off prevents SKYFi2 from draining thevehicle battery. You may also useAuto-Off as a sleep feature to turnSKYFi2 off automatically after a periodof time.

  • 17

    Adva

    nced F

    eatu

    res

    To set Auto-Off:1. Press the menu button.2. Use the scroll wheel (or remote) to

    select Auto-Off/Sleep Timer.Press the XM button to confirmselection.

    3. Use the scroll wheel (or remote) toselect the time period. Press theXM button to confirm selection.

    4. Press the menu button to returnto the main menu and then againto return to normal operation.

    Aiming the Home AntennaFor the best reception possible, aimthe home antenna using the followingmethod:1. Press the menu button.2. Use the scroll wheel (or remote) to

    select Antenna Aiming. Press theXM button to confirm selection.

    3. Slowly turn and tilt the antenna.The Satellite and Terrestrialsignal bars will change. Find theposition that gives the strongestsignal strength on eitherSatellite or Terrestrial.

    4. Press the menu button to returnto the main menu and then againto return to normal operation.

  • 18

    Adva

    nced F

    eatu

    res

    TuneSelectTuneSelect notifies you when afavorite song or artist is playing on achannel other than the one you arecurrently listening to. You can chooseto search for songs either by song titleor by the artist name, configurable inthe menu under TuneSelect.

    To add a song to the TuneSelect list:1. Press the menu button and

    select the TuneSelect option.You can choose Select by Song(factory default) or Select byArtist. Press the menu buttonto return to normal operation.

    2. While the song is playing, pressand hold the XM button for 2seconds. SKYFi2 will beep and display Artist/Song Selected.SKYFi2s TuneSelect feature canremember up to 20 songs or artists(not both); when the list is full, anynew entry will replace the oldestsong or artist in the list.

    3. When any song in the list plays onany channel, SKYFi2 beeps anddisplays Artist/Song Found andthe name of the song.

    4. While the Artist/Song Foundmessage is displayed, press theXM button to switch to thechannel playing the song.

  • 19

    Adva

    nced F

    eatu

    res

    To delete a song from the TuneSelect list:1. Press the menu button.2. Use the scroll wheel (or remote) to

    choose TuneSelect. Press theXM button to confirm selection.

    3. You may erase all songs or artistsin the list, or erase individualsongs or artists. Use the scrollwheel (or remote) and XM but-ton to select the desired optionand follow the instructions on theSKYFi2 display.

    4. Press the menu button to returnto the main menu and then againto return to normal operation.

    Stock TickerSKYFi2 can track up to 20 of yourfavorite stock symbols, displaying the price and daily movement on the screen.*

    To add a stock symbol:1. Press the menu button.2. Use the scroll wheel (or remote) to

    select Stock Ticker. Press theXM button to confirm.

    3. Select Add Stocks.4. Use the scroll wheel (or remote)

    to select each letter in the desiredstock symbol. Press the XMbutton after each letter.

    Note: SKYFi2 has an embedded list ofmore than 9,000 regularly traded stocksymbols that helps complete partial entries and prevents you from entering a non-existent symbol.

    5. Press the XM button to confirmand save the stock symbol inmemory.

    6. Press the menu button to returnto the main menu and then againto return to normal operation.

    7. Press the display button toselect mode 2 to view your personal Stock Ticker.

    *You can track any stock and most indices listed on the NYSE, AMEX, or NASDAQ. Market information isdelayed approximately 25 minutes. Stock data provided by ComStock, Inc.

  • 20

    Adva

    nced F

    eatu

    res

    To delete a stock symbol:1. Press the menu button.2. Use the scroll wheel (or remote) to

    select Stock Ticker. Press theXM button to confirm.

    3. Select Erase Stocks.4. SKYFi2 gives you a choice of

    deleting individual or all symbols.Use the scroll wheel (or remote)and the XM button to makeyour choice.

    5. Press the menu button to returnto the main menu and then againto return to normal operation.

    Info ExtrasXM Satellite Radio will broadcast addi-tional information such as sports scoresand other useful information featuresthroughout the time you own and useyour SKYFi2. To view the most recentlist of available information, press themenu button and select Info Extras.Then just follow the instructions on thedisplay to choose the type of Info Extrasyou are interested in, personalize it toview as little or as much as you like, andlook for new information that has beenadded.

    30-Minute Replay30-Minute Replay gives users theopportunity to finally hear that songagain. This feature applies to the current listening session only. Turningyour SKYFi2 off removes all songsfrom the up-to-30-minute buffer.

  • 21

    Adva

    nced F

    eatu

    res

    To rewind to the beginning of a song:1. Press the button. If a song has

    been playing for less than 5 seconds,SKYFi2 rewinds to the beginning ofthe previous song. If the song hasbeen playing for longer than 5 seconds, SKYFi2 rewinds to thebeginning of the current song.

    2. Pressing the button again skipsbackward to previous songs in theorder they played. SKYFi2 allowsyou to access up to 30 minutes ofpreviously listened to live broadcast.

    3. Pressing the button skips forward.

    4. To exit 30-Minute Replay andreturn to the live XM broadcast,press and hold the button untilSKYFi2 displays LIVE at the topof the screen.

    To pause a song:1. Press the button. The word

    PAUSE appears in the display.2. To resume playback from where

    you had paused, press the button again.

    3. To return to the live XM broadcast,press and hold the button until SKYFi2 beeps and displaysLIVE at the top of the screen.

    Recall Last ChannelPress the jump button to switch tothe channel that was previously beinglistened to. Pressing the jump buttonmore than once allows you to switchbetween two channels at a time.

  • 22

    Adva

    nced F

    eatu

    res

    Direct TuneNormally, you can use the scrollwheel (or the remotes up and downbuttons) to preview the artists andsong titles on other channels. Youmust press the XM button to tuneto the desired channel. To change thisso that you do not have to press theXM button and SKYFi2 behaves likean FM radio or television, change theDirect Tune option to On.1. Press the menu button.2. Use the scroll wheel (or remote) to

    select Direct Tune. Press theXM button to confirm.

    3. Use the scroll wheel (or remote) toselect On. Press the XM buttonto confirm.

    4. Press the menu button to returnto the main menu and then againto return to normal operation.

    SearchSKYFi2 allows you to search channelsby category, scan through all presets,or scan through all channels. Selectthe search method through the menu.

    To search by category:1. Press the menu button. Select

    Search Mode, then select Search by Category. Return to normal operation by pressing the menu button. (Search by Category is the factory default.)

    2. Press the search button to enter category mode.

    3. Press the search button repeatedlyuntil you find the desired category.

    4. Turn the scroll wheel to view channels within that category. Press the XM button to select a channel.

  • 23

    Adva

    nced F

    eatu

    res

    To scan all presets:1. Press the menu button. Select

    Search Mode, then select Search by Scanning. Return to normal operation by pressing the menu button.

    2. Press the preset/direct button toselect one of the preset banks.

    3. Press the search button. SKYFi2 plays each preset channel for 5 seconds, then advances to the next preset.

    4. Press the search button again tostop scanning.

    To scan all channels:1. Press the menu button. Select

    Search Mode, then select Search by Scanning. Return to normal operation by pressing the menu button.

    2. Press the preset/direct button to select direct mode.

    3. Press the search button. SKYFi2 plays each channel for 5 seconds, then advances to the next channel.

    4. Press the search button again tostop scanning.

    Note: When searching, SKYFi2 does notplay any channel that you skipped usingthe Channel Skip/Add feature. You canalways tune to these channels using thescroll wheel or by direct entry.

  • 24

    Adva

    nced F

    eatu

    res

    Skipping Channels While TuningYou can choose to skip over certainchannels when using the scroll wheel.1. Press the menu button.2. Use the scroll wheel (or remote) to

    select Channel Skip/Add. Pressthe XM button to confirm.

    3. SKYFi2 displays a list of channels.In front of each channel is a +(meaning the channel is notskipped) or a - (meaning thechannel is skipped).

    4. To skip a channel, use the scrollwheel (or remote) to highlight thatchannel. Press the XM button tochange the + to a -.

    5. To add a channel back, use thescroll wheel (or remote) to high-light that channel. Press the XMbutton to change the - to a +.

    6. Press the menu button to returnto the main menu and then againto return to normal operation.

    Note: You can still tune to skipped channelsby entering the channel number (in directentry mode) or by pressing a preset (in presetmode) if that channel has already beenstored. This is not considered an appropriatemethod for performing parental control. Tocompletely block access to any XM channel,contact XM Listener Care at 1.800.XM.RADIO(1.800.967.2346).

  • 25

    Adva

    nced F

    eatu

    res

    Setting the Clock1. Press the menu button.2. Use the scroll wheel (or remote) to

    select Set Clock. Press the XMbutton to confirm.

    3. You can use a 12-hour or 24-hour(military time) format. Use thescroll wheel (or remote) and XMbutton to make your choice.

    4. Use the scroll wheel (or remote) tochoose your local time zone. Youcan also choose whether or not toadjust settings for daylight-savingtime. Press the XM button to confirm. XM automatically sets the minutes.

    5. Press the menu button to returnto the main menu and then againto return to normal operation.

    Restoring Factory DefaultsThis feature erases all of your person-al settings in the presets, TuneSelect,memory, Stock Ticker, and SportsTicker, and resets all other settings tothe original factory configuration.1. Press the menu button.2. Using the scroll wheel (or remote),

    select Set Factory Defaults.Press the XM button to confirm.

    3. Select Yes to restore the factorydefault settings. Press the XMbutton to confirm. Otherwise,press the menu button to returnto the main menu and then againto return to normal operation.

  • 26

    Adva

    nced F

    eatu

    res

    Setting the Display Screen ModeYou may change the appearance ofthe display to suit your preference, or to improve visibility in bright sun-light or cold weather by disabling thescrolling text to allow information tobe viewed without scrolling.1. Press the menu button.2. Use the scroll wheel (or remote)

    to select Display Screen Mode. Press the XM button to confirm.

    3. You may select between white characters on black background orblack characters on white back-ground (using Background Mode)or scrolling versus non-scrolling (using Scrolling Mode).

    4. Press the menu button to returnto the main menu and then again to return to normal operation.

    Warning: Failure to follow these instructionscould result in personal injury, death, and/ordamage to your SKYFi2 Receiver, accessories,and/or to your vehicle or other property.

    Caution: Refrain from consuming or storingfood or drinks near your SKYFi2. Spilling foodor drink on the unit could damage it. Improperlyinstalling the antenna cable could cause leaksthat can damage your SKYFi2, accessories,vehicle, or other property.

  • 27

    Refe

    rence

    Accessories (sold separately)There are various accessories available for your SKYFi2. Consultyour local retailer or www.delphi.comor www.xmradio.com for availability.

    Vehicle Adaptor Kit by Delphi (SA10102)Use the Vehicle Kit to install SKYFi2 inanother vehicle. Includes an antenna, 12Vpower adaptor, cradle, and various mounts.

    Home Adaptor Kit by Delphi (SA10103)Allows you to use SKYFi2 in your home oroffice. Includes a high-gain home antenna,an AC power adaptor, home stand, andaudio cable.

    Marine Adaptor Kit by Delphi (SA10046)Allows you to use SKYFi2 on a boat.Includes a splash-proof case, marine antenna, mount, and FM modulator.

    Antenna Extension Cable for XM Home Antenna (SA10006)Extends the antenna cable by 50 feet.Includes all necessary cables and connectors.

    FM Direct Adaptor by Delphi (SA10112)For geographic areas with many FM stationsand few open FM channels, the Delphi FMDirect Adaptor minimizes interference. A professional installer can advise you whetherthis adaptor is suitable for your vehicle and driving conditions. You may require additional antenna cable adaptors dependingon your vehicle; consult your installer.

    ReferenceCare of Your SKYFi2Important: Use only a soft, dry cloth to clean

    the outside of your SKYFi2, anyperipherals, and any accessories.

    Do not use any solvents, chemicals,or cleaning solutions containingalcohol, ammonia, or abrasives.

    Do not allow liquids to spill on the unit.

    Do not use sprays near your SKYFi2. It is best to keep SKYFi2 out of

    direct sunlight or other sources of extreme heat.

    Avoid placing SKYFi2 in places whereair cannot circulate around the unit.

  • 28

    Refe

    rence

    TroubleshootingSKYFi2 is designed and built to provideyou with trouble-free performancewithout the need for servicing. If itdoes not appear to be functioningproperly, follow these troubleshootingsteps first to try to remedy the situationyourself:1. Attach all connections firmly and

    securely.2. Make sure the cigarette

    lighter/auxiliary power socket isclean and free of corrosion.

    3. If you have installed SKYFi2 in avehicle and it does not power on,check the 12V adaptor fuse byunscrewing the ribbed end of the12V adaptor. If required, replace

    If you see this on the display:

    NO SIGNALCause: the XM signal is beingblocked.

    ANTENNACause: the XM antenna is notplugged into SKYFi2.

    OFF AIRCause: the channel selected isnot currently broadcasting.

    You should:

    Move SKYFi2s antenna away from the obstructed area,e.g., an underground garage. Make sure the vehicleantenna is mounted outside the vehicle or the homeantenna is positioned near a south-facing window.

    Make sure the antenna is correctly attached toSKYFi2 and that the cable is not damaged or kinked.Turn SKYFi2 off, then on, to reset this message.

    Tune to another channel.

    with a 1-amp fuse only. If the 12Vadaptor does not have a removableend-cap, it has an internal fuse thatresets itself after it is left unpluggedfor a period of time.

  • 29

    Refe

    rence

    If this happens:

    You do not receive all XM channelsyou have subscribed to.

    Audio sounds distorted.

    Audio is too soft.

    You cannot tune to a channel.

    No song title or artist name displayed.

    Audio has static while listeningthrough an FM radio.

    Audio on XM instant traffic andweather channels sounds differentfrom other XM channels.

    You should:

    Contact XM Satellite Radio (see page 6).

    Reduce audio output level (see page 15).

    Increase audio output level (see page 15).

    Check that you have not chosen to skip that channel (see page 24). If the problem persists, contactXM Satellite Radio at 1.800.967.2346. Verify that you are authorized to receive that channel as partof your XM subscription, and that you have not asked XM Satellite Radio to block that channel.

    Nothing is wrong with your SKYFi2. That information may be in the process of being updated.On some sports and news channels, there is no title or artist information.

    Change to another FM frequency (see page 14). If the problem persists and you are using the wireless FM modulator in a vehicle, change to a hard-wired FM modulator (see page 15, page 27).

    Nothing is wrong with your SKYFi2. These channels use a different audio technology than theother XM channels.

  • Delphi Limited Consumer WarrantyDelphi Product and Service Solutions(Delphi) warrants all Portable XMSatellite Radio Accessory Products sold by Delphi (each Product) to be free ofdefects in material and workmanship, subject to the following conditions:

    The duration of Delphis warranty withrespect to each Product is limited to one(1) year from the date of sale to the originalconsumer purchaser.

    No other express warranties are made withrespect to any Product. All implied warranties,including warranties of merchantability andfitness for a particular purpose are limitedto the warranty period set forth above. Thiswarranty is not transferable and appliesonly to the original consumer purchaser ofthe Product.

    Delphi will, as its sole obligation under thiswarranty, replace or repair, at its option,

    30

    Refe

    rence

    Contacting Technical Supportand Customer ServiceFor additional information in solvingproblems with your SKYFi2, contactDelphi at 1.877.GO DELPHI(1.877.463.3574). Customer Service: MondayFriday,

    8:00 a.m.4:30 p.m. Eastern Time Technical Support: MondayFriday,

    8:00 a.m.8:00 p.m. Eastern Time

    Customer service and technical supportare also available at www.delphi.com.

    Technical InformationDimensions

    SKYFi2 Receiver: 4.65 in. W x 2.91 in. H x 1.26 in. D (118 mm x 74 mm x 32 mm)

    SKYFi2 Remote Control: 1.58 in. W x 4.65 in. H x .87 in. D (40 mm x 118 mm x 22 mm)

    WeightSKYFi2 Receiver: 5.20 oz. (147 g)SKYFi2 Remote Control: 1.60 oz. (45 g)

    Inputs and Outputs (when connected tocar cradle or home stand)

    Antenna: 1 RF SMB connectorPower: 6V, 1000 mA maximum current,

    P13 connector, positive polarity Audio output: 3.5 mm diameter

    mini-stereo jack

  • any Product that does not conform to thiswarranty. Products may be repaired orreplaced with new or with refurbisheditems. This limited warranty does not coverdefects in appearance, cosmetic or decora-tive items, including any non-operativeparts. Under no circumstances will Delphibe liable for any incidental or consequentialdamages under this warranty or anyimplied warranties. These remedies are thecustomers exclusive remedies for breachof warranty. This limited warranty onlyextends to customers who purchase theProducts in the United States.

    Delphi will not be responsible for damageresulting from any (i) deviation fromDelphis operating instructions as printed inDelphis catalog or on any packaging,labels, or other literature provided with aProduct, (ii) installation of a Product in amanner which is inconsistent with Delphis

    written instructions, (iii) alteration or modification of a Product, (iv) misuse, (v) neglect, (vi) abuse, (vii) accident, (viii)normal wear and tear, (ix) commercial use,(x) improper storage, (xi) environmentalconditions, including excessive temperatureor humidity, (xii) service by anyone otherthan a Delphi authorized repair facility,(xiii) other improper application, installationor operation of the Product, or (xiv) defectsor malfunctions of which Delphi is notadvised within ten (10) days of the expirationof the limited warranty period.

    How you (the Customer) can get service:To obtain warranty service, you must returnthe defective Product with the originalreceipt to the original place of purchase. Iffurther clarification or additional informationis required from Delphi, you may call Delphiat 1.877.GO DELPHI (1.877.463.3574). If war-ranty service is needed at any time during

    the warranty period, the purchaser will berequired to furnish a sales receipt/proof ofpurchase indicating the date of purchase,amount paid, and place of purchase.Customers who fail to provide such proofof purchase will be charged for therepair/replacement of any Product.

    How state law relates to the warranty:Some states do not allow limitations on theduration of implied warranties, or theexclusion or the limitation of incidental orconsequential damages. So the above limi-tations or exclusions may not apply to you.This warranty gives you specific legalrights. You may also have other rights thatmay vary from state to state. NO PERSONIS AUTHORIZED BY DELPHI TO MODIFYOR ADD TO THIS LIMITED WARRANTY.

    31

    Warra

    nty