Dell OptiPlex 7070 Ultra · Monitor tilt angle ... 2.5 inch 500 GB 5400RPM SATA HDD ... NOTE: To install the offset VESA mount on a Dell E-Series monitor, remove the VESA cover from

Dell OptiPlex 7070 Ultra Technical Guide Book

Regulatory Model: D13URegulatory Type: D13U001

Notes, cautions, and warnings

NOTE: A NOTE indicates important information that helps you make better use of your product.

CAUTION: A CAUTION indicates either potential damage to hardware or loss of data and tells you how to avoid the

problem.

WARNING: A WARNING indicates a potential for property damage, personal injury, or death.

© 2019 Dell Inc. or its subsidiaries. All rights reserved. Dell, EMC, and other trademarks are trademarks of Dell Inc. or its subsidiaries. Other trademarks may be trademarks of their respective owners.

2019 - 09

Rev. A00

1 Views.......................................................................................................................................... 5Exploded view........................................................................................................................................................................ 5Top view................................................................................................................................................................................. 5Bottom view...........................................................................................................................................................................6Left and right view................................................................................................................................................................ 6Stands view............................................................................................................................................................................ 7

2 Stands........................................................................................................................................11Fixed stand.............................................................................................................................................................................11

Installing the device on a fixed stand............................................................................................................................11Monitor tilt angle............................................................................................................................................................ 19

Height-adjustable stand-HAS............................................................................................................................................. 19Installing the device on a height-adjustable stand..................................................................................................... 19Stand tilt, pivot, and swivel images............................................................................................................................. 26

Offset VESA mount............................................................................................................................................................ 26Installing device on offset VESA mount..................................................................................................................... 26

3 Specifications of OptiPlex 7070 Ultra........................................................................................... 31Processors.............................................................................................................................................................................31Chipset...................................................................................................................................................................................31Operating system................................................................................................................................................................. 31Commercial platform Windows 10 N-2 and 5yrs OS supportability ............................................................................. 31Memory.................................................................................................................................................................................32Storage................................................................................................................................................................................. 32Ports and connectors..........................................................................................................................................................32Audio..................................................................................................................................................................................... 33Video..................................................................................................................................................................................... 34Communications.................................................................................................................................................................. 34Power adapter..................................................................................................................................................................... 34Dimensions and weight.......................................................................................................................................................35Powering the system.......................................................................................................................................................... 35Type-C display settings...................................................................................................................................................... 36Security.................................................................................................................................................................................36Data security........................................................................................................................................................................ 36Energy Star and Trusted Platform Module (TPM)......................................................................................................... 36Computer environment.......................................................................................................................................................37Smart power enablement................................................................................................................................................... 37

4 Engineering specifications.......................................................................................................... 38Physical system dimensions............................................................................................................................................... 38Power....................................................................................................................................................................................39Audio..................................................................................................................................................................................... 40Graphics options...................................................................................................................................................................41

Intel UHD Graphics.........................................................................................................................................................41

Contents

Contents 3

Supported hard drives......................................................................................................................................................... 412.5 inch 500 GB 5400RPM SATA HDD...................................................................................................................... 412.5 inch 2 TB 5400RPM SATA HDD...........................................................................................................................422.5 inch 500GB 7200RPM SATA HDD.......................................................................................................................422.5 inch 500GB 7200RPM SATA FIFS Self-encrypting hard drive........................................................................ 432.5 inch 1 TB 7200RPM SATA HDD............................................................................................................................43128 GB M.2 2230 PCIe Gen3x2 NVMe Class 35 Solid State Drive ....................................................................... 44256 GB M.2 2230 PCIe Gen3x2 NVMe Class 35 Solid State Drive....................................................................... 44512 GB M.2 2230 PCIe Gen3x2 NVMe Class 35 Solid State Drive........................................................................ 451 TB M.2 2230 PCIe Gen3x2 NVMe Solid State Drive Class 35............................................................................. 45256 GB M.2 2230 PCIe Gen3x4 NVMe Class 35 Opal 2.0 SED Solid State Drive............................................... 46

Communications.................................................................................................................................................................. 46Communications - Integrated...................................................................................................................................... 46Wireless communication............................................................................................................................................... 48

Chassis enclosure and ventilation requirements..............................................................................................................49Acoustic noise emission information.................................................................................................................................50Military specifications......................................................................................................................................................... 50System management features........................................................................................................................................... 51

Dell Client Command Suite for In-Band systems management .................................................................. 51Intel Vpro........................................................................................................................................................................ 52

Accessories.......................................................................................................................................................................... 52Multi-display capability........................................................................................................................................................53Stand limitations with regards to monitor weights......................................................................................................... 54

5 Getting help.............................................................................................................................. 55Contacting Dell.................................................................................................................................................................... 55

4 Contents

Views

Exploded view

1. Stand2. OptiPlex 7070 Ultra3. Stand cover

Top view

: Power button

1

Views 5

Bottom view

Table 1. Bottom view

Callout Description

USB 3.1 Gen 2 Type-C port with DisplayPort Alt Mode/Power Delivery

Power-adapter port

Network RJ-45 port

USB 3.1 Gen 2 Type-A port with SmartPower

USB 3.1 Gen 1 Type-A port with SmartPower

Left and right view

6 Views

Table 2. Left and right view

Callout Description

Service tag location

Universal audio jack

Hard-drive status LED

USB 3.1 Gen 2 Type-C port with DisplayPort Alt Mode

USB 3.1 Gen 2 Type-A port with PowerShare

Security screw hole

Security lock slot

Stands viewFixed stand:

Height-adjustable stand:

Views 7

Offset VESA Mount:

8 Views

VESA Adapter:

Views 9

10 Views

Stands

Fixed stand

Installing the device on a fixed stand1. Align and insert the slots on the fixed stand into the tab on the stand base.

2. Lift and tilt the stand base.

3. Tighten the captive screw to secure the stand to the base.

4. Slide the release latch on the stand, until you hear a click, to release the stand cover.

5. Slide and lift the cover to release it from the stand.

2

Stands 11

6. Remove the screw that secures the stand mounting bracket to the stand.

7. Lift the mounting bracket to release the hooks on the bracket from the slots on the stand.

12 Stands

8. To avoid any damage to the monitor, ensure that you place the monitor on a protective sheet.

9. Align the screws on the mounting bracket with the screw holes on the monitor.

10. Tighten the four captive screws to secure the mounting bracket to the monitor.

Stands 13

11. Select the height at which you want to mount the monitor and align the hooks on the mounting bracket with the slots on the stand.

12. Replace the screw to secure the fixed stand to the monitor.

14 Stands

13. Align the vents on the device with the vents on the stand cover.

14. Lower the device in the stand until you hear a click.

15. Connect the power, network, keyboard, mouse, and display cables to the device and to the power outlet.

NOTE: To avoid any pinching or crimping of the cables while closing the stand cover, it is recommended that you

route the cables as indicated in the image.

Stands 15

16. Slide the back cover, along with the device, into the stand until you hear a click.

17. Lock the device and the stand cover.

16 Stands

18. Press the power button to turn on the device.

Stands 17

18 Stands

Monitor tilt angle

Height-adjustable stand-HAS

Installing the device on a height-adjustable stand1. Align and insert the slots on the height-adjustable stand into the tab on the stand base.

2. Lift and tilt the stand base.

3. Tighten the captive screw to secure the stand to the base.

Stands 19


5. For installing the height-adjustable stand to the monitor:

a) Align and insert the hooks on the mounting bracket on the stand into the slots on the monitor, until you hear a click.

20 Stands

6. For installing QR to VESA bracket for E-Series monitor:

a) Align the screw holes on the QR to VESA bracket with the screw holes on the monitor.b) Install the four screw spacers and the screws to secure the QR to VESA bracket to the monitor.c) Align and insert the QR tabs on the stand into the slots on the QR to VESA bracket on the monitor.d) Tighten the thumb screw to secure the stand to the QR to VESA bracket.

Stands 21

7. To release the stand cover, slide the release latch until you hear a click.

8. Slide and lift the cover to release it from the stand.

9. Align the vents on the device with the vents on the stand cover.

10. Lower the device in the stand until you hear a click.

22 Stands

11. Connect the power, network, keyboard, mouse, and display cables to the device and to the power outlet.

NOTE: To avoid any pinching or crimping of the cables while closing the stand cover, it is recommended that you

route the cables as indicated in the image.

12. Slide the back cover, along with the device, into the stand until you hear a click.

Stands 23

13. Lock the device and the stand cover.

14. Press the power button to turn on the device.

24 Stands

Stands 25

Stand tilt, pivot, and swivel images

Offset VESA mount

Installing device on offset VESA mount1. Align the screw holes on the device with the screw holes on the offset VESA mount.

2. Install the four screws to secure the device to the offset VESA mount.

26 Stands


4. Align the screw holes on the offset VESA mount with the screw holes on the monitor.

5. Install the four screw spacers and the screws to secure the offset VESA mount to the monitor.

Stands 27

6. Insert the hooks on the mounting bracket of the monitor arm stand into the slots on the offset VESA mount on the monitor.

7. Lower the monitor on the monitor arm stand until you hear a click.

28 Stands

NOTE: To install the offset VESA mount on a Dell E-Series monitor, remove the VESA cover from the back of the

monitor and secure the offset VESA mount along with the device to the monitor.

Stands 29

NOTE: While orienting the monitor horizontally, route the security lock cable to the right side of the device to avoid

any impact to WLAN performance.

30 Stands

Specifications of OptiPlex 7070 Ultra

ProcessorsTable 3. Processors

Processors Wattage Core count Thread count Speed Cache Integrated graphics

8th Generation Intel Core i3-8145U

25 W 2 4 2.10 GHz to 3.90 GHz

4 MB Intel UHD Graphics 620


25 W 4 8 1.60 GHz to 3.90 GHz



25 W 4 8 1.60 GHz to 4.10 GHz



25 W 4 8 1.80 GHz to 4.60 GHz



25 W 4 8 1.90 GHz to 4.80 GHz


ChipsetTable 4. Chipset

Description Values

Chipset Integrated with the processor

Processor 8th Generation Intel Core i3/i5/i7

DRAM bus width 64 bit

Flash EPROM 32 MB

PCIe bus Up to Gen 3.0

Operating system• Windows 10 Home (64-bit)• Windows 10 Professional (64-bit)• Windows 10 Pro National Academic (64-bit)• Ubuntu 18.04 LTS

Commercial platform Windows 10 N-2 and 5yrs OS supportabilityAll newly introduced 2019 and later commercial platforms (Latitude, OptiPlex, and Precision) will qualify and ship with the most current factory installed Semi-Annual Channel Windows 10 version (N) and qualify (but not ship) the previous two versions (N-1, N-2). This device platform, OptiPlex 7070 Ultra will RTS with Windows 10 version (19H1/RS4, RS5) at the time of launch, and this version will determine the N-2 versions that are initially qualified for this platform.

3

Specifications of OptiPlex 7070 Ultra 31

For future versions of Windows 10, Dell will continue to test the commercial platform with coming Windows 10 releases during device production and for five years post-production, including both fall and spring releases from Microsoft.

Please reference the Dell Windows as a Service (WaaS) website for additional information on N-2 and 5 year Windows OS supportability. Website can be found at this link: https://www.dell.com/support/article/us/en/04/qna44484/dell-windows-as-a-service-waas-supported-products?lang=en.

This website also includes a matrix of other platforms qualified on specific versions of Windows 10.

MemoryTable 5. Memory specifications

Description Values

Slots Two SO-DIMM slots

Type Dual-channel DDR4

Speed 2400 MHz

Maximum memory 64 GB

Minimum memory 4 GB

Memory size per slot 4 GB, 8 GB, 16 GB, 32 GB

Configurations supported • 4 GB (1 x 4 GB)• 8 GB (1 x 8 GB, 2 x 4 GB)• 16 GB (1 x 16 GB, 2 x 8 GB)• 32 GB (1 x 32 GB, 2 x 16 GB)• 64 GB (2 x 32 GB)

StorageYour computer supports the following configuration:

• One 2.5 inch, 7 mm hard drive and One M.2 2230 solid-state drive

Table 6. Storage specifications

Storage type Interface type Capacity

2.5-inch 5400 rpm hard drive SATA AHCI Up to 2 TB

2.5-inch 7200 rpm hard drive SATA AHCI Up to 1 TB

2.5 inch 7200 rpm FIPS Self Encrypting Opal 2.0 hard drive FIPS Up to 500 GB

M.2 PCIe NVMe Class 35 solid-state drive PCIe x2 Gen 3 NVMe Up to 1 TB

M.2 PCIe NVMe Class 35 Self Encrypting Opal 2.0 solid-state drive

PCIe x4 Gen 3 NVMe Up to 256 GB

Ports and connectorsTable 7. External ports and connectors

Description Values

External:

32 Specifications of OptiPlex 7070 Ultra

HTTPS://WWW.DELL.COM/SUPPORT/ARTICLE/US/EN/04/QNA44484/DELL-WINDOWS-AS-A-SERVICE-WAAS-SUPPORTED-PRODUCTS?LANG=EN

HTTPS://WWW.DELL.COM/SUPPORT/ARTICLE/US/EN/04/QNA44484/DELL-WINDOWS-AS-A-SERVICE-WAAS-SUPPORTED-PRODUCTS?LANG=EN

Description Values

Network 1 RJ-45 port 10/100/1000 Mbps

USB • 1 USB 3.1 Gen 2 Type-C port with DisplayPort Alt Mode (side)• 1 USB 3.1 Gen 2 Type-A port with PowerShare (side)• 1 USB 3.1 Gen 2 Type-C port with DisplayPort Alt Mode/Power

Delivery (rear)• 1 USB 3.1 Gen1 Type-A port with SmartPower (rear)• 1 USB 3.1 Gen 2 type-A port with SmartPower (rear)

Audio Universal Audio Jack

Video DisplayPort over USB Type-C port

Power adapter port 4.50 mm x 2.90 mm DC-in

Security • 1 Kensington lock slot• 1 Security screw hole to secure cover

Table 8. Internal ports and connectors

Description Values

Internal:

M.2 • 1 M.2 slot for 2230 M.2 WiFi and Bluetooth card• 1 M.2 slot for 2230 M.2 PCIe solid-state drive

NOTE: To learn more about the features of different types of M.2 cards, see the knowledge base article SLN301626.

SATA 1 SATA 3.0 FFC connector for hard drive

AudioTable 9. Audio specifications

Description Values

Controller Realtek ALC3204-CG 4 channel high definition audio

Stereo conversion Supported

Internal interface High definition audio interface

External interface Universal Audio Jack

Speakers Not applicable


https://www.dell.com/support/article/sln301626

VideoTable 10. Integrated graphics specifications

Integrated graphics

Controller External display support Memory size Processor

Intel UHD Graphics 620 • Up to three displays supported via DisplayPort Multi-Streaming Technology (MST)

• Two DisplayPort 1.2 support over USB 3.1 Type-C port

Shared system memory 8th Generation Intel Core i3/i5/i7

Communications

EthernetTable 11. Ethernet specifications

Description Values

Model number Intel i219V (non-vPro) or Intel i219LM (vPro)

Transfer rate 10/100/1000 Mbps

Wireless moduleTable 12. Wireless module specifications

Description Values

Model number Qualcomm QCA61x4A Intel Wi-Fi 6 AX200

Transfer rate Up to 867 Mbps Up to 2.4 Gbps

Frequency bands supported 2.4 GHz, 5 GHz 2.4 GHz, 5 GHz

Wireless standards • Wi-Fi 802.11 a/b/g • Wi-Fi 4 (WiFi 802.11n)• Wi-Fi 5 (WiFi 802.11ac)

• Wi-Fi 802.11 a/b/g • Wi-Fi 4 (Wi-Fi 802.11n)• Wi-Fi 5 (Wi-Fi 802.11ac)• Wi-Fi 6 (Wi-Fi 802.11ax)

Encryption • 64-bit/128-bit WEP• AES-CCMP• TKIP

• 64-bit/128-bit WEP• AES-CCMP• TKIP

Bluetooth Bluetooth 4.2 Bluetooth 5.0

Power adapterTable 13. Power adapter specifications

Description Values

Type 65 W


Description Values

Diameter (connector) 4.50 mm x 2.90 mm

Input voltage 100 VAC-240 VAC

Input frequency 50 Hz-60 Hz

Input current (maximum) 1.60 A

Output current (continuous) 3.34 A

Rated output voltage 19.50 VDC

Temperature range:

Operating 0°C to 40°C (32°F to 104°F)

Storage -40°C to 70°C (-40°F to 158°F)

Dimensions and weightTable 14. Dimensions and weight

Description Values

Height:

Front 19.70 mm (0.78 in.)

Rear • Without HDD: 19.70 mm (0.78 in.)• With HDD: 27.74 mm (1.09 in.)

Width 96.10 mm (3.78 in.)

Depth 256.20 mm (10.09 in.)

Weight (maximum) maximum 0.65 kg (1.43 lb)

NOTE: The weight of your computer depends on the configuration ordered and the manufacturing variability.

Powering the systemOptiPlex 7070 Ultra can be powered using a AC adapter (4.5 mm input power source) or through the USB Type-C cable connected to your display. During normal operation, when the device is connected with a single power source (primary power source), connecting a second power source and disconnecting the primary power source will shut down the device. However, if the secondary power source is disconnected while the primary power source is connected, the system continues to operate normally.

When the device is powered with both the power sources—AC adapter and USB Type-C cable, the AC adapter is the primary power source and USB Type-C is the secondary power source. Disconnecting the AC adapter will shut down the system. If the secondary power source is disconnected, the system continues to operate normally.

NOTE: Hotswap between the AC adapter and USB Type-C power source is not supported.

Table 15. Powering the system

Primary Power Source Secondary power source connected Power source disconnected Operation

AC Adapter Rear Type-C AC Adapter Shut down

AC Adapter Rear Type-C Rear Type-C Normal

Rear Type-C AC Adapter AC Adapter Normal


Primary Power Source Secondary power source connected Power source disconnected Operation

Rear Type-C AC Adapter Rear Type-C Shut down

Type-C display settingsWhen using a Dell USB Type-C display to power on your OptiPlex 7070 Ultra, to avoid any power loss to the device when the display is turned off or on Standby mode, ensure that the Always on USB-C Charging setting on the display is enabled.

On turning on the Dell USB Type-C display for the first time, the Easy initial setup is displayed. Click Yes, to enable the Always on USB-C charging option.

If you miss enabling the option on Easy Initial setup window, then you can enable the setting using the on-screen display menu available on the display. For more information on enabling the option, see the documentation that is shipped with your display.

NOTE: The "USB-C Always On Charging" firmware option may not be present on all Dell USB Type-C displays. You can

enable the USB-C Always On charging feature only after you update the firmware. Download the Dell display firmware,

at Dell.com/support.

SecurityTable 16. Security

Features Specifications

Trusted Platform Module (TPM) 2.0 Integrated on system board

Chassis intrusion switch Integrated on system board

Firmware TPM Optional

Kensington lock slot Standard

Noble Security Custom All-in-One Plate Lock Slot Standard

Protected slot/vent openings Standard

Data securityTable 17. Data security


Dell Data Protection - Endpoint Security Suite (DDP|ESS) and Endpoint Security Suite Enterprise (DDP|ESS-E)

Optional

Dell Data Protection - Software Encryption (DDPE) Optional

Microsoft Device Guard & Credential Guard (Windows Enterprise) Optional

Microsoft Windows Bitlocker Optional

Energy Star and Trusted Platform Module (TPM)Table 18. Energy star and TPM


Energy Star Energy Star 7 compliant

TPM • Hardware trusted Platform Module (Discrete TPM Enabled)• Firmware Trusted Platform Module only (Discrete TPM

Disabled)


https://www.dell.com/support/home/us/en/04/?c=us&l=en&s=bsd


Environmental, Ergonomic and Regulatory standards Environmental Standards (eco-labels): ENERGY STAR, EPEAT Registered, TCO Certified, CEL, WEEE, Japan Energy Law, South Korea E-standby, South Korea Eco-label, EU RoHS, China RoHS.

Please see your local representative or www.dell.com for specific details.

Computer environmentAirborne contaminant level: G1 as defined by ISA-S71.04-1985

Table 19. Computer environment

Description Operating Storage

Temperature range 0°C to 35°C (32°F to 95°F) -40°C to 65°C (-40°F to 149°F)

Relative humidity (maximum) 10% to 90% (non-condensing) 0% to 95% (non-condensing)

Vibration (maximum)*0.66 GRMS 1.30 GRMS

Shock (maximum) 110 G† 160 G†

Altitude (maximum) -15.2 m to 3048 m (4.64 ft to 10000 ft) -15.2 m to 10668 m (4.64 ft to 35065.61 ft)

* Measured using a random vibration spectrum that simulates user environment.

† Measured using a 2 ms half-sine pulse when the hard drive is in use.

Smart power enablementDeep sleep is disabled in the BIOS by default. If the system is connected to a USB keyboard and Deep sleep is enabled in the BIOS, the system will not power on or wake from hibernation when a key is pressed on the USB keyboard.

Enable USB Wake support:

1. Press <F12> when the Dell logo appears to initiate a one-time boot menu. Go to BIOS Setup.2. Select Power Management.3. Navigate to USB Wake Support4. Turn on Enable USB Wake Support5. Navigate to Deep Sleep control6. Disable Deep Sleep


Engineering specifications

Topics:

• Physical system dimensions• Power• Audio• Graphics options• Supported hard drives• Communications• Chassis enclosure and ventilation requirements• Acoustic noise emission information• Military specifications• System management features• Accessories• Multi-display capability• Stand limitations with regards to monitor weights

Physical system dimensionsNOTE: System weight and shipping weight is based on a typical configuration and may vary based on PC configuration.

A typical configuration includes: integrated graphics and one hard drive.

Table 20. System dimensions

Chassis dimensions (system without stand):

Height 19.7 mm(w/o HDD cover)/27.74 mm(w/ HDD cover)

Width 96.1mm

Depth 256.2 mm

Height adjustable stand dimensions:

Height 434.0 mm

Width x Depth 245.2 mm x 195 mm

Weight 2.5 kg

Fixed height stand dimensions:

Height 434.0 mm

Width x Depth 229.5 mm x 186. 5mm

Weight 2.25 kg

Offset VESA mount dimensions:

Height 259.1 mm

Width x Depth 219.8 mm x 24.2 mm

Weight 0.31 kg

Packaging parameters with height adjustable stand

Length 494 mm

4

38 Engineering specifications

Chassis dimensions (system without stand):

Width 297 mm

Height 213 mm

Shipping weight 4.96 kg

Packaging parameters with fixed height stand

Length 494 mm

Width 297 mm

Height 213 mm


Packaging parameters with offset VESA mount

Length 494 mm

Width 297 mm

Height 213 mm


PowerTable 21. Power

Power Supply Wattage 65 W

AC input Voltage Range 100 – 240 VAC

AC input current (low AC range/high AC range)

1.60 A

AC input Frequency 50 Hz - 60 Hz

AC holdup time (80% load) N/A

Average Efficiency 88%

Typical Efficiency (Active PFC) N/A

DC parameters

+12.0 v output N/A

+19.5 v output +19.5 v output

+19.5 v output auxiliary output N/A

Max total power 65 W

Max combined 12.0 v power (note: only if more than one 12 v rail)

N/A

BTUs/h (based on PSU max wattage) N/A

Power Supply Fan N/A

Compliance

Erp Lot6 Tier 2 0.5watt requirement Yes, Pout 0.25W,Pin<0.48W

Climate Savers / 80Plus Compliant N/A

Energy Star 7.0/7.1 Qualified N/A

FEMP Standby Power Compliant N/A

DOE Level IV Yes

Engineering specifications 39

Table 22. Thermal Dissipation

Power Graphics Heat dissipation Voltage

65 W 100 to 240 VAC , 50 to 60 Hz , 1.60 A/ 3.34 A

Table 23. CMOS battery

3.0v CMOS battery (Type and estimated battery life)

Brand Type Voltage Composition Life

VIC-DAWN CR-2032 3V Lithium Continuous Discharge Under 30 kΩ Load till 2.0V End-Voltage at the temperature of 23°C±3°C. The batteries should be submitted to 150 temperature cycles from 60°C~-10°C, and then be stored for more than 24hours at 23°C±3°C

JHIH HONG CR-2032 3V Lithium Continuous Discharge Under 15 kΩ Load to 2.5V End-Voltage.

20°C±2°C: 940Hrs or longer; 910Hrs or longer after 12 months.

MITSUBISHI CR-2032 3V Lithium Continuous Discharge Under 15 kΩ Load to 2.0V End-Voltage.



AudioTable 24. Audio

Integrated Realtek ALC3204 High Definition Audio

High Definition Stereo support Yes

Number of channels 4

Number of Bits / Audio resolution 16, 20, and 24-bit resolution

Sampling rate (recording/playback) Support 44.1K/48K/96K/192 kHz sample rates

Signal to Noise Ratio 97dB for DAC output, 90dB for ADC input

Analog Audio

Waves MaxxAudio Pro

Audio Jack Impedance

Microphone 40K ohm~60K ohm

Line-In Not supported


Integrated Realtek ALC3204 High Definition Audio

Line-Out Not supported

Headphone 1~4 ohm, Universal Audio jack

Internal Speaker Power Rating Not supported

Graphics options

Intel UHD GraphicsTable 25. Intel UHD Graphicsspecifications

Intel UHD Graphics

Bus Type Integrated

Memory Type DDR4

Graphics Level i3/i5/i7: GT2 (UHD)

Estimated Maximum Power Consumption (TDP) 15 W (included in the CPU power)

Overlay Planes Yes

Operating Systems Graphics/ Video API Support DirectX 12, OpenGL (4.5 from Intel CML POR)

Maximum Vertical Refresh Rate • HDMI 1.4: 4096x2160 @ 60 Hz, 24bpp, Via optional USB Type-C to HDMI dongle

• Max Digital: (DP 1.2 over Type-C Port) 4096x2304 @ 60Hz, 24bpp

Number of display supported Up to three displays supported via DisplayPort Multi-Streaming Technology (MST)

Multiple Display Support Via two Type-C: HDMI 1.4 (via optional USB-C cable to HDMI cable);

DisplayPort 1.2 (via optional USB-C cable or USB-C to DP cable);

VGA (via optional USB-C to VGA cable);

DVI (via optional USB-C to DVI cable)

External Connectors Two USB Type–C port

Supported hard drives

2.5 inch 500 GB 5400RPM SATA HDDTable 26. 2.5 inch 500 GB 5400RPM SATA HDD

Capacity (GB) 500GB HDD 5400RPM

Dimensions (in.) (W x D x H) Approximately (2.760 x 3.959 x 0.276 in.)

Interface type and Maximum speed

Up to 6 Gb/s (SATA 3.0)

MTBF 550,000 hours

Logical Blocks 976,773,168

Power Source:


Power Consumption (reference only)

Idle 0.7 W, Active 3.10 W

Environmental Operating Conditions (Non-Condensing):

Temperature Range 5°C to 60°C

Relative Humidity Range 5% to 90%

Non-Op Shock (@0.5 ms) 350 G

Environmental Non-Operating Conditions (Non-Condensing):

Temperature Range -40°C to 65°C


2.5 inch 2 TB 5400RPM SATA HDDTable 27. 2.5 inch 2 TB 5400RPM SATA HDD

Capacity (GB) 2 TB HDD 5400 RPM

Dimensions (in.) (W x D x H) Approximately (2.760 x 3.959 x 0.276) in.



MTBF 550,000 hours

Logical Blocks 3,907,029,168

Power Source:




Temperature Range 5 °C to 60 °C




Temperature Range -40 °C to 65 °C


2.5 inch 500GB 7200RPM SATA HDDTable 28. 2.5 inch 500GB 7200RPM SATA HDD

Capacity (GB) 500GB HDD 7200RPM




MTBF 550,000 hours


Power Source:











2.5 inch 500GB 7200RPM SATA FIFS Self-encrypting hard driveTable 29. 2.5 inch 500GB 7200RPM SATA FIFS Self-encrypting hard drive

Capacity (GB) 500GB 7200 SED FIPS




MTBF 550,000 hours


Power Source:










2.5 inch 1 TB 7200RPM SATA HDDTable 30. 2.5 inch 1 TB 7200RPM SATA HDD

Capacity (GB) 1 TB HDD 5400 RPM




MTBF 550,000 hours


Power Source:











128 GB M.2 2230 PCIe Gen3x2 NVMe Class 35 Solid State DriveTable 31. 128 GB M.2 2230 PCIe Gen3x2 NVMe Class 35 SSD

Capacity (GB) 128 GB

Dimensions (mm) (W x D x H) (22 x 30 x 2.38) mm


PCle Gen3 8 GT/s (up to 2 lanes)

MTBF 1.4M hours


Power Source:





Relative Humidity Range 10 to 90%

Non-Op Shock (@0.5 ms) 1,500G








PCle Gen3 8 GT/s (up to 2 lanes)

MTBF 1.4M hours


Power Source:












Capacity (GB) 512


Interface type and Maximum speed Up to 8 Gb/s (PCle 3.0)

MTBF 1.4M hours


Power Source:

Power Consumption (reference only) Idle 0.5 W, Active 4.5 W








1 TB M.2 2230 PCIe Gen3x2 NVMe Solid State Drive Class 35Table 34. 1 TB M.2 2230 NVMe PCIe SSD Class 35

Capacity (GB) 1 TB

Dimensions (mm) (W x D x H) Approximately (22 x 30 x 2.38) mm


PCIe Gen3 8 Gb/s (Up to 2 lanes)

MTBF 1.4M hours


Power source



Environmental Operating Conditions (Non-Condensing)






Temperature Range -40 °C to 65 °C


256 GB M.2 2230 PCIe Gen3x4 NVMe Class 35 Opal 2.0 SED Solid State DriveTable 35. 256 GB M.2 2230 PCIe NVMe Class 35 Opal 2.0 SED SSD




PCIe Gen3 8 Gb/s (up to 4 lanes)

MTBF 1.4M hours


Power Source:






Non-Op Shock (@2 ms) 1,500G




Communications

Communications - Integrated

Communications – Integrated Intel ethernet connect i219-LMTable 36. Integrated Intel ethernet connect i219-LM

External Connector Type RJ45

Data Rates supported 10/100/1000 Mbps

Controller Details

Controller Bus Architecture PCI Express Base Specification Revision

Integrated Memory N/A

Data Transfer Mode (example: Bus-Master DMA) N/A

Power Consumption (full operation per data rate connection speed)

542 mW (Max.)

Power Consumption (standby operation) 76 mW (Max.)


IEEE Standards Compliance 802.3

Hardware Certifications N/A

Boot ROM Support EEPROM (located in SPI)

Network Transfer Mode

Network Transfer Rate:

10BASE-T (full-duplex) 20 Mbps

100BASE-TX (half-duplex) 100 Mbps

100BASE-TX (full-duplex) 200 Mbps

10 Mb (full/half-duplex)


1000 Mb (full-duplex)

Environmental

Operating Temperature 0° C to 85° C (32° F to 185° F)

Operating Humidity 20% to 80% (non-condensing)

Operating System Driver Support Windows 10 (64-bit), Ubuntu, Neokylin

Manageability WOL, PXE 2.1

Management Capabilities Alerting Intel Standard Manageability – must be selected at time of purchase

This term does not connote an actual operating speed of 1 Gb/sec. For high speed transmission, connection to a Gigabit Ethernet server and network infrastructure is required.

Communications – Integrated Intel ethernet connect i219-VTable 37. Integrated Intel ethernet connect i219-V

External Connector Type RJ45

Data Rates supported 10/100/1000 Mbps

Controller Details

Controller Bus Architecture PCI Express Base Specification Revision

Integrated Memory N/A

Data Transfer Mode (example: Bus-Master DMA) N/A

Power Consumption (full operation per data rate connection speed)

542 mW (Max.)

Power Consumption (standby operation) 76 mW (Max.)

IEEE Standards Compliance 802.3

Hardware Certifications N/A

Boot ROM Support EEPROM (located in SPI)

Network Transfer Mode

Network Transfer Rate:

10BASE-T (full-duplex) 20 Mbps

100BASE-TX (half-duplex) 100 Mbps

100BASE-TX (full-duplex) 200 Mbps



1000 Mb (full-duplex)

Environmental

Operating Temperature 0° C to 85° C (32° F to 185° F)

Operating Humidity 20% to 80% (non-condensing)

Operating System Driver Support Windows 10 (64-bit), Ubuntu, Neokylin

Manageability WOL, PXE 2.1


Management Capabilities Alerting Intel Standard Manageability – must be selected at time of purchase

This term does not connote an actual operating speed of 1 Gb/sec. For high speed transmission, connection to a Gigabit Ethernet server and network infrastructure is required.

Wireless communication

Qualcomm QCA61x4A 802.11ac MU-MIMO Dual Band (2x2) Wi-Fi + Bluetooth 4.2 LE M.2 Wireless CardTable 38. Qualcomm QCA61x4A 802.11ac

Host interface M.2 2230 form factor ( WiFi - PCIe , Bluetooth - USB)

Network standard 802.11a, 802.11b, 802.11g, 802.11n and 802.11ac

11ac Wave2 feature MU-MIMO RX

Wi-Fi Alliance certifications 802.11a, 802.11b, 802.11g, WPA, WPA2 , WMM, 11ac, Wifi -Direct, WMM-Power Save, Wifi Protected Setup, Voice-Personal

Operating frequency bands 2.4 GHz (802.11b/g/n) and 5 GHz (802.11a/n/ac)

Dual diversity antenna switching (For systems designed with main and auxiliary antennas)

2x2 MIMO operation when in 802.11n mode with 2x2 or greater access point

Data rates • 802.11ac - Up to 867 Mbps• ; 802.11n - Up to 450 Mbps• 802.11a/g - Up to 54 Mbps• 802.11b - Up to 11 Mbps

Receive sensitivity • 802.11ac: -59 dBm @ 400 Mbps; - 57dBm @ 866.7Mbps• 802.11n/a: -67 dBm @ 300 Mbps ; -70 dBm @ 144.4Mbps• 802.11g/a: -75 dBm @ 54 Mbps• 802.11b: -85 dBm @ 11 Mbps

Security Authentication Open, Shared, WPA, WPA-PSK, WPA2, WPA2-PSK

EAP methods EAP-TLS, EAP-TTLS (MSCHAPv2), PEAPv0(EAP-MS-CHAPv2)

Client utility Native Wi-Fi and Bluetooth Microsoft UI support

Software support Microsoft WHQL certified for Windows 7/8.1 and Windows 10; Linux

Radio On/Off Hardware and software on/off disables transmit and receive to comply with aviation in-flight restrictions

LED output Wireless enable

Roaming Seamless roaming between 802.11a, 802.11b, 802.11b/g, 802.11n and 802.11ac access points

Wake On wireless Supported when using Magic Packet over the Air

Miracast (WiFi Display) Supports Miracast (WiFi Display) on Win8.1/10

Country restrictions All (except Tunisia)


Wireless PAN Standard Dual-mode Bluetooth 4.2, BLE (HW ready, SW depends on OS)

Bluetooth data rates Up to 3Mbps

Bluetooth operating frequency bands 2.4 GHz

Transmission FHSS (Frequency Hopping Spread Spectrum)

Bluetooth data encryption 128-bit encryption

Bluetooth receive sensitivity • ‐70dBm@BER≤0.01% (EDR)• -100dBm@BER≤30.8% (LE nominal)

Temperature • Operating temperature 0° to + 65° C• Storage temperature of -40° to +85° C

Humidity Up to 90%

Intel AX200 160 MHz + Bluetooth 5.0Table 39. Intel AX200 160 MHz + Bluetooth 5.0

Feature Specifications

Model Number Intel AX200

Transfer rate (Up to ___ Mbps) 2400

Frequency bands supported:

Frequency band1 (GHz) 2.4

Frequency band2 (GHz) 5

Wireless standards:

Wireless standards option1 WiFi 802.11a/b/g

Wireless standards option2 Wi-Fi 4 (WiFi 802.11n)

Wireless standards option3 Wi-Fi 5 (WiFi 802.11ac)

Wireless standards option4 Wi-Fi 6 (WiFi 802.11ax)

Encryption:

Encryption option1 64-bit/128-bit WEP

Encryption option2 AES-CCMP

Encryption option3 TKIP

Bluetooth Bluetooth 5.0

Chassis enclosure and ventilation requirementsEnclosure Ventilation

If your enclosure has doors, they need to be of a type that allows at least 30% airflow through the enclosure (front and back).

Do not block your computer ventilation(front and back) by stuff to permit the proper airflow.

Do not seal your computer top venting completely in order to provide better Graphic card cooling capability.

Enclosure Minimum Clearance

Leave a 14 cm (5.5 in.) minimum clearance on all vented sides of the computer to permit the airflow required for proper ventilation.

Recommended Enclosure


Do not install your computer in an enclosure that does not allow airflow / dusty environment / temperate over 35 and 45 degrees centigrade for specific system configurations. Do not put any objects to directly block air-vent. This restricts the airflow and impacts your computer’s performance, possibly causing it to overheat.

Regulatory and Environmental Compliance

Product related conformity assessment and regulatory authorizations including Product Safety, Electromagnetic Compatibility (EMC), Ergonomics, and Communication Devices relevant to this product may be viewed at www.dell.com/regulatory_compliance. The Regulatory Datasheet for this product is located at http://www.dell.com/regulatory_compliance.

Details of Dell's environmental stewardship program to conserve product energy consumption, reduce or eliminate materials for disposal, prolong product life span and provide effective and convenient equipment recovery solutions may be viewed at www.dell.com/environment. Product related conformity assessment, regulatory authorizations, and information encompassing Environmental, Energy Consumption, Noise Emissions, Product Materials Information, Packaging, Batteries, and Recycling relevant to this product may be viewed by clicking the Design for Environment link on the webpage.

Acoustic noise emission informationDeclared Sound Power (LWAd)

The Declared Noise Emission in accordance with ISO 9296 for the Dell OptiPlex 7070 Ultra is as follows: (all values LWAd expressed in bels; 1 bel=10 decibels, re 10-12 Watts)

Table 40. SSD/Integrated Graphics Configuration

Component Test Configuration

CPU I7-8565U

Memory 64

HDD/ SSD (#, capacity) 1 TB M.2 SSD*1

RMSD (Removable Media Storage Device)

N/A

Graphic Adapter Integrated graphics

Power Supply Output Wattage & Efficiency

65 VI

Table 41. Declared Sound Pressure (LpA)

Operating Mode Sound Power Declared mean A-weighted level

Sound Power Statistical adder for verification

Sound Pressure Declared mean A-weighted emission level LpA,m (dB)

LWA,m (bels) Kv (bells) Operator Bystander

Idle 2.6 0.4 17.7 15.5

HDD Operating 2.5 0.4 28.8 15.8

CPU Stressed 3.2 0.4 17.8 24.0

ODD Operating N/A N/A N/A N/A

Military specificationsThe OptiPlex 7070 Ultra meet military specifications for the following MIL-STD 810G tests :

Table 42. Military specifications

Test Category Test Method Test Results

Non-operating altitude test Method 500.5 PASS

Operating altitude test Method 500.5 PASS

Non-operating high temperature test Method 501.5 PASS


Test Category Test Method Test Results

Operating high temperature test Method 501.5 FAIL

Non-operating low temperature test Method 502.5 PASS

Operating low temperature test Method 502.5 PASS

Humidity test Method 507.6 PASS

Mechanical shock test - I (Bench Handling Test) Method 516.6 PASS

Mechanical shock test - II (Functional Shock Test) Method 516.6 PASS

Mechanical shock test - III (Material to be Packaged Test)

Method 516.6 PASS

Mechanical shock test - IV (Crash Hazard Shock Test)

Method 516.5 PASS

Operating vibration test Method 514.6 PASS

Non-operating vibration test Method 514.6 PASS

Blowing dust test Method 510.5 PASS

System management featuresDell commercial systems come with a number of systems management options that are include by default for In-Band management with our Dell Client Command Suite. In-Band management meaning that the Operating System is functional and the device is connected to a network so that it can be managed. The Dell Client Command Suite of tools can be leveraged individually or with a systems management console like SCCM, LANDESK, KACE, etc.

We also offer Out-of-Band management as an option. Out-of-band management is when the system does not have a functional operating system or is turned off and you still want to be able to manage the system in that state.

Dell Client Command Suite for In-Band systems managementDell Client Command Suite - a free toolkit available for download, for all OptiPlex PCs at http://dell.com/command, automates and streamlines systems management tasks, saving time, money, and resources. It consists of the following modules that can be used independently, or with a variety of systems management consoles such as SCCM.

Dell Client Command Suite is a free toolkit available for download, for all OptiPlex PCs at http://dell.com/command, automates and streamlines systems management tasks, saving time, money, and resources. It consists of the following modules that can be used independently, or with a variety of systems management consoles such as SCCM.

Dell Command | Deploy enables easy operating system (OS) deployment across all major OS deployment methodologies and provides numerous system-specific drivers that have been extracted and reduced to an OS-consumable state.

Dell Command l Configure is a graphical user interface (GUI) admin tool for configuring and deploying hardware settings in a pre-OS or post-OS environment, and it operates seamlessly with SCCM and Airwatch and can be self-integrated into LANDesk and KACE. Simply, this is all about the BIOS. Command l Configure allows you to remotely automate and configure over 150+ BIOS settings for a personalized user experience.

Dell Command l PowerShell Provider can do the same things as Command l Configure, but with a different method. PowerShell is a scripting language that allows customers to create a customized and dynamic configuration process.

Dell Command l Monitor is a Windows Management Instrumentation (WMI) agent that provides IT admins with an extensive inventory of the hardware and health-state data. Admins can also configure hardware remotely by using command line and scripting.

Dell Command l Power Manager (end-user tool) is a GUI-based factory-installed battery management tool that allows end users to choose the battery management methods that meet their personal preferences or work schedule, without sacrificing IT's capability to control those settings with Group Policy.


http://dell.com/command

http://dell.com/command

Dell Command | Update (end-user tool) is factory-installed and allows admins to individually manage and automatically present and install Dell updates to the BIOS, drivers, and software. Command l Update eliminates the time-consuming hunting and pecking process of update installation.

Dell Command l Update Catalog provides searchable metadata that allows the management console to retrieve the latest system-specific updates (driver, firmware or BIOS). The updates are then delivered seamlessly to end-users using the customer's systems management infrastructure that is consuming the catalog (like SCCM).

Dell Command | vPro Out of Band console extends hardware management to systems that are offline or have an un-reachable OS (Dell exclusive features).

Dell Command | Integration Suite for System Center - This suite integrates all the key components of the Client Command Suite into Microsoft System Center Configuration Manager 2012 and Current Branch versions.

Dell Client Command Suite's integration with VMware Workspace ONE Powered by AirWatch, now allows customers to manage their Dell client hardware from the cloud, using a single Workspace ONE console.

Intel VproIntel vPro option must be configured in the factory at the time of purchase, as it is NOT field upgradable.

It is available on the OptiPlex 7070 Ultra with Intel© CoreTM i5 and i7 processors and offers the most complete set of out-of-band management features including KVM, IPv6 support, graceful shutdown, and all the features from previous versions of vPro. It uses the latest version of Intel’s Active Management Technology (AMT) which is currently at version 12.0.

AccessoriesTable 43. Accessories

Accessories

Stands and Mounts OptiPlex Ultra Fixed Stand

OptiPlex Ultra Height Adjustable Stand

OptiPlex Ultra Offset VESA Mount

Cables OptiPlex Ultra USB C to USB C cable, 0.6 meter

OptiPlex Ultra USB-A to USB-B 3.0 cable, 0.6 meter

OptiPlex Ultra USB C to DisplayPort cable, 0.6 meter

OptiPlex Ultra USB-C to DisplayPort cable, 1.0 meter

OptiPlex Ultra USB-C to HDMI cable, 1.0 meter

OptiPlex Ultra USB-C to DVI cable, 1.0 meter

OptiPlex Ultra USB-C to VGA cable, 1.0 meter

Keyboards and Mice Dell KB216 Multimedia Keyboard

Dell KB813 Smartcard Keyboard

Dell KM636 Wireless Keyboard and Mouse Combo

Dell KM717 Premium Wireless Keyboard and Mouse Combo

Dell KB522 Multimedia Wired Keyboard

Dell MS116 Wired Mouse

Dell Laser Scroll USB 6-Buttons Silver and Black Mouse

Dell MS819 Wired Mouse with Fingerprint Reader

Dell WM326 Wireless Mouse

Dell WM527 Wireless Mouse

Monitors Qualified with select Dell Professional, UltraSharp, and E series monitors


Accessories

Audio External speakers, Dell Pro Stereo Headsets

Locks Kensington Desktop and Peripheral Locking Kit

Kensington MicroSaver 2.0 Keyed Laptop Lock

Kensington MicroSaver Twin Laptop Lock

External Optical Disk Drive Dell USB Slim DVD/RW Drive - DW316

Multi-display capabilityWhen the monitor USB-C hub is used for external peripherals, additional USB-A to USB-B cable can be used to provide bandwidth to additional lanes.

Table 44. Multi-display and maximum monitor resolution

Monitor Connection type:

USB-C (need USB hub extension)

USB-C (NOT need USB hub extension )

DisplayPort HDMI VGA DVI

Cable: Dell 0.6 m USB-C to C

Dell 0.6 m USB-C to C

Dell 0.6 m USB-C to DP

Cus Kit 1 m USB-C to HDMI

Cus Kit 1 m USB-C to VGA

Cus Kit 1 m USB-C to DVI

Daisy Chaining support?

Yes Yes Yes N/A N/A N/A

Max resolution

Single display

4096 x 2340 @60 Hz— USB-A to B cable is required

OR

2560 x 1440 @60 Hz

1 x (4096 x 2340 @60 Hz)

1 x (4096 x 2340 @60 Hz)

3840 x 2160 @60 Hz

1920 x 1200 @60 Hz

1920 x 1200 @60 Hz

Dual MST 2 x (2560 x 1440 @60 Hz)— USB-A to B cable is required

OR

2 x (1920 x 1080 @60 Hz)

2 x (2560 x 1440 @60 Hz)

2 x (2560 x 1440 @60 Hz)

Triple MST

3 x (1920 x 1080 @60 Hz) - USB-A to B cable is required

OR

2 x (1920 x 1080 @60 Hz)

+

1 x (640 x 480 @75 Hz)

3 x (1920 x 1080 @60 Hz)

3 x (1920 x 1080 @60 Hz)

NOTE: For those Type-C monitors which don't need USB-A to B cable for USB hub extension, the resolution of MST will

be limited as data and display signal are transferred simultaneously via a USB-C cable


Stand limitations with regards to monitor weightsTable 45. Stand limitations with regards to monitor weights

Stands Limitations

HAS stand • Supports 19.5 inch - 27 inch Dell monitors weighing between 2.2 kg (4.85 lbs) - 5.4 kg (11.9 lbs), including sound bar and cables.

• The stand provides a native Dell Quick Release mounting mechanism for quick and easy attachment to the Dell P, U & UP displays and also includes a Quick Release to VESA adapter bracket to support Dell E model displays of similar size and weight.

Fixed stand • Supports 19.5 inch - 24 inch Dell monitors weighing between 2.2 kg (4.85 lbs) - 3.3 kg (7.28 lbs), including sound bar and cables.

• The stand provides a 100 mm VESA hole pattern with captive thumbscrews for easy attachment to VESA compatible displays up to 24 inch.

Offset VESA Mount Enables the Ultra module to be mounted on the back of an E Series display as well as be paired with Dell-branded arms and dual monitor stand and mounted on the back of a VESA compatible display:

• Dell Dual Monitor Stand - MDS19 - supports two 19 inch - 27 inch displays

• Dell Single Monitor Arm - MSA14 - supports 19 inch - 32 inch displays with a max load of 20.5 lbs*

• Dell Slim Single Monitor Arm - MSA18 - supports 19 inch - 27 inch displays with a max load of 11.2 lbs*

• Dell Single Monitor Arm - MSA20 launching Q4 2019 - supports 19 inch - 38 inch displays with a max load of 22 lbs*

• Dell Dual Monitor Arm - MDA20 launching Q4 2019 - supports two 19 inch - 27 inch displays with max load of 19 lbs on each arm.

*: Max weight includes the weight of the display and the weight of the module and mount.

NOTE: The Offset VESA Mount is not intended for mounting OptiPlex 7070 Ultra between a P or U series display and display stand. The additional weight may compromise the height adjustable spring as well as potentially cause the display to tip forward.


Getting help

Topics:

• Contacting Dell

Contacting DellNOTE: If you do not have an active Internet connection, you can find contact information on your purchase invoice,

packing slip, bill, or Dell product catalog.

Dell provides several online and telephone-based support and service options. Availability varies by country and product, and some services may not be available in your area. To contact Dell for sales, technical support, or customer service issues:

1. Go to Dell.com/support.

2. Select your support category.

3. Verify your country or region in the Choose a Country/Region drop-down list at the bottom of the page.

4. Select the appropriate service or support link based on your need.

5

Getting help 55

Documents

Dell OptiPlex 7070 Ultra · Monitor tilt angle ... 2.5 inch 500 GB 5400RPM SATA HDD ... NOTE: To install the offset VESA mount on a Dell E-Series monitor, remove the VESA cover from