DHDMDEEPHOLE DRILLING AND MILLING MACHINE FOR THE MOLD INDUSTRY

Deephole Drilling for Mold Makers and General Machining Industries

3 AXIS, 4 AXIS, 5 AXIS▸ The TARUS DHDM Range of machines is designed for

Mold Makers, Die Cast Die and General Machining.

▸ All DHDM versions and include a separate Milling Spindle.

▸ The DHDM Machines are available in 3 Axis, 4 and 5 Axis Configurations

▸ Available CNC’ include TARUS CNC, Heidenhain TNC640, Siemens 840D

DHDM DEEPHOLE DRILLING FOR MOLD AND TUBE SHEETS

DHDM RANGE

▸ Drilling and Milling for Molds

▸ Drilling and Chamfering for Tube Sheets

▸ Gun Drill and BTA/STS Process / Tooling

▸ DHDM= 3 Axis

▸ DHDM-R = 4 Axis (Rotary Table)

▸ DHDM-R-I = 5 Axis (Rotary and Tipping Drill Slide)

▸ 50 Taper Milling Spindle on all versions

▸ TARUS CNC, Heidenhain TNC640, Siemens 840D

▸ 40 or 60 Tool ATC for Milling Spindle Optional

▸ Full Enclosure or Table Splash Guard available as options

DHDM (3 AXIS)

▸ X Axis: 106” or 154” (table)

▸ Y Axis: 60” (vertical)

▸ W Axis: 46” (column)

▸ Hole Depth: 82”

▸ Hole Diameter: 2” Gundrill; 1.5” BTA/STS Process

▸ Table Size: 60” by 96” or 144”

▸ Milling Spindle: 50 Taper, 60 kW, 275 kW (S6), 0-3000 rpm

▸ Choice of CNC: TARUS Heidenhain TNC 640, Siemens 840D

▸ Blum Wireless Probing and Tool Length Measuring

DHDM-R (4 AXIS)

▸ X Axis: 130” (table)

▸ Y Axis: 60” (vertical)

▸ W Axis: 46” (column)

▸ Rotary Table Size: 60” by 60”, 60” by 80”, or 118” by 118”

▸ Hole Depth: 82”

▸ Hole Diameter: 2” Gundrill; 1.5” BTA/STS Process

▸ Milling Spindle: 50 Taper, 60 kW, 275 kW (S6), 0-3000 rpm

▸ Choice of CNC: TARUS Heidenhain TNC 640, Siemens 840D

▸ Blum Wireless Probing and Tool Length Measuring

DHDM-R-I (5 AXIS)

▸ X Axis: 130” (table)

▸ Y Axis: 60” (vertical)

▸ W Axis: 46” (column)

▸ Rotary Table Size: 60” by 60”, 60” by 80”, or 118” by 118”

▸ Hole Depth: 82”

▸ Hole Diameter: 2” Gundrill; 1.5” BTA/STS Process

▸ Drill / Mill Slide Inclines +/- 15 degrees from horizontal

▸ Pivot Point for inclined slide is at front of machine directly behind mill spindle and chip box for maximum stiffness, largest possible front to rear clamping distance and best kinematics (less vertical axis required)

▸ Milling Spindle: 50 Taper, 60 kW, 275 kW (S6), 0-3000 rpm

▸ Choice of CNC: TARUS Heidenhain TNC 640, Siemens 840D

▸ Blum Wireless Probing and Tool Length Measuring

ZONE REV DATE APPROVED

REVISIONS

DESCRIPTION

DWG NO.SIZE

D

A

B

C

D

12

1DWG NO. SH REV

SCALE

PART NAME

D

C

B

A

8 7 6 5 4 3

345678

DRAWN

CHECKED

DHDM-R-IDSCHULTE 7/11/17

P. DERIEU GNL32731=25

CH

ILLE

R

60 X 80 ROTARY TABLE