Upload
lenhan
View
216
Download
2
Embed Size (px)
Citation preview
Danfoss Industrial Refrigeration
Collection of all theDeclarations of Conformity
REFRIGERATION & AIR CONDITIONING DIVISION www.danfoss.com/ir
148B9702 – rev. 03
DECLARATION OF CONFORMITY The Pressure Equipment Directive 97/23/EC
Name and Address of Manufacturer within the European Community
Danfoss A/S Albuen 29 DK 6000 Kolding Denmark
Description of Pressure Equipment
Refrigerant stop valve, with straight or angled bonnet arrangement Type SVA-DL and SVA-DH
Nominal bore DN250 - 300mm. (10 - 12 in.)
Classified for Fluid Group I (all refrigerants (toxic, non-toxic, flammable and non-flammable)) For further details / restrictions - see Installation Instruction
Temperature range and maximum allowable working pressure
PS36 bar (522 psi) at –90ºC → –60ºC (–130ºF → –76ºF) PS40 bar (580 psi) at –60ºC → +60ºC (–76ºF → +140ºF) PS36 bar (522 psi) at +60ºC → +80ºC (+140ºF → +176ºF) PS32 bar (464psi) at +80ºC → +120ºC (+176ºF → +248ºF) PS28 bar (406psi) at +120ºC → +150ºC (+248ºF → +302ºF)
Conformity and Assessment Procedure Followed Category III IV Module B1 + D B + D
Certificate ID B1 D:
07 202 0124 Z 0248/2/0001 07 202 1321 Z 0045/0/01
B: D:
07 202 0124 Z 0248/2/0001 07 202 1321 Z 0045/0/01
Nominal bore
Standard application DN250 mm. (10 in.) DN 300 mm. (12 in.)
Name and Address of the Notified Body monitoring the Manufacturer’s Quality Assurance System Name and carried out the Inspection TÜV-NORD Systems GmbH & Co. KG.
Grosse Bahnstrasse 31 22525 Hamburg, Germany
(0045)
References of Harmonised Standards used
EN 10028-3 EN 10213-3 EN 10222-4 EN12284
References of other Technical Standards and Specifications used
AD-Merkblätter DIN 3840 Authorised Person for the Manufacturer within the European Community Name: Steffen Nielsen Title: Director, Operations
Signature: Date: 15/08/2011
Date Issued by Date Approved by
27th October 2011
27th October 2011
Danfoss only vouches for the correctness of the English version of this declaration. In the event of the declaration being translated into any other language, the translator concerned shall be liable for the correctness of the translation ID No. 148B9757 Revision No. 00 DKRCI.PR.SC0.B1.02 / 520H5768 Page 1 of 1
Danfoss A/S DK-6430 Nordborg Danmark CVR nr.: 20 16 57 15 Telefon: +45 7488 2222 Fax: +45 7449 0949
EC-DECLARATION OF CONFORMITY
Danfoss Industrial Refrigeration
declares under our sole responsibility that the product(s) Guided R adar (T DR ) Level T ransmitters in the following types:
AK S 4100 AK S 4100U
Covered by this declaration is in conformity with the following directive(s), standard(s) or other normative document(s), provided that the product is used in accordance with our instructions. Directive: 2004/108/EC EMC Directive H armonized Standards: EN 61326-1, 2006; Emission Class A and Class B Note: T he device must be mounted in a vessel or as a coaxial probe .
DECLARATION OF CONFORMITY
Authorised Person for the Manufacturer's Representative within the European Community
Name: Kurt M. Sand Title: Product Manager
Signature: Date: 14/01/2005
Name and Address of Manufacturer's Representative within the European CommunityDanfoss A/SAutomatic Controls-Industrial Refrigeration Albuen 29DK-6000 KoldingDenmark
DeclarationWe hereby declare that below-mentioned equipment is in conformity with below mention directives, standars or other normative documents, provided it is used according to our instructions.
Description of EquipmentGas Detection Sensor TransmitterType GD
References of other Technical Standards and Specifications usedEN 55011, 1998EN 61326, 1996
Cenelec EN 61010-2, 2001
Following the provisions of 73/23/EEC, Low Voltage Directive (LVD)
Danfoss A/S (AC-SMC/MWA), 11 - 2010 DKRCI.PR.S00.A1.02 / 520H4943 1
148B9748 rev 07
MANUFACTOR DECLARATION
Name and Address of Manufacturer within the European Community
Danfoss A/SAlbuen 29DK 6000 KoldingDenmark
DeclarationWe hereby declare that below mentioned equipment are Classified for Fluid Group I (all refrigerants (toxic, non-toxic, flammable and non-flammable)), and that all are covered by Article 3, paragraph 3 of The Pressure Equipment Directive 97/23/EC.
Description of Pressure Equipment
Valve types Valve typesPM1-5 ,1-10 ,1-15 ,1-20 ,1-25 NRVA DN 15 -25PM3-5 ,3-10 ,3-15 ,3-20 ,3-25 NRVS, NRS DN 15 -25PMC 1-5 ,1-8 ,1-12 ,1-20 PMC 3-5 ,3-8 ,3-12 ,3-20 FA
PMFL/H 80-1 ,80-2 ,80-3 ,80-4 ,80-5 ,80-6 ,80-7 FIA 15-25, FIL 6ICV (ICM, ICS, ICF) 20-35, ICMT,ICMTS LLG (Note: The classification is only valid for LLG with stop valves)CVP, CVPP, CVH, CVQ, CVT, CVC, CVMD, CVK, EVM MLI 20 - 25
ORV25 OFV 20 - 25AKS 41 QDVBV - BLOCK VALVE DN 10-15 REG 3 - 25CVMQ SCA, CHV 20 - 25TEA 20, TEA 85 SNV-ST, SNV-SSTEAQ 20-85 SVA 3-25TEAT AKVA 15-25TEVA EVRA 3-25, EVRAT 10-20EVRS 10-25 EVRAT 10-20EVRB SGT 10-25DSV 1, DSV15 AKVA 10
References to Technical Standards and Specifications used
EN 12284
Authorised Person for the Manufacturer within the European CommunityName: Steffen Nielsen Title: Director, Operations
Signature:Date: 16/02/2012
148B9745 rev.02
DECLARATION OF CONFORMITY The Pressure Equipment Directive 97/23/EC
Name and Address of Manufacturer within the European Community
Danfoss A/S Albuen 29 DK 6000 Kolding Denmark Description of Pressure Equipment Refrigerant check and stop-check valve, with straight or angle housing
Type SVA – Compressor Stop Valve Nominal bore DN50-125 mm. (2-5 in.)
Classified for Fluid Group I (all refrigerants (toxic, non-toxic, flammable and non-flammable))
Maximum allowable working pressure and temperature range
Standard applications
40* bar (580 psi) at –50ºC/+150ºC (-76ºF/+302ºF)
High pressure
applications 50*/52* bar (754 psi) at –50ºC/+50ºC(–76ºF/+122ºF) 40* bar (725 psi) at +50ºC/+150ºC (122ºF/+302ºF)
*Actual pressure marked on the valve
Conformity and Assessment Procedure Followed
Category II III Module D1 B1+D
Certificate ID D1:07 202 1321 Z 0045/0/01 B1:07 202 0124 Z 0182/2/0001 D1:07 202 1321 Z 0045/0/01
Nominal bore
DN50-80 mm. (2-3 in.)
DN100-125 mm. (4-5 in.)
Name and Address of the Notified Body monitoring the Manufacturer’s Quality Assurance System and carried out the Inspection TÜV-NORD Systems GmbH & Co. KG.
Grosse Bahnstrasse 31 22525 Hamburg, Germany
(0045)
References of Harmonised Standards used EN 10028-3 EN 10213-3 EN 10222-4 EN 12284 References of other Technical Standards and Specifications used AD-Merkblätter DIN 3840 Authorised Person for the Manufacturer within the European Community Name: Steffen Nielsen Title: Director, Operations
Signature: Date: 16/08/2011
148B9743 rev. 04
DECLARATION OF CONFORMITY The Pressure Equipment Directive 97/23/EC
Name and Address of Manufacturer within the European Community
Danfoss A/S Albuen 29 DK 6000 Kolding Denmark
Description of Pressure Equipment
Refrigerant discharge check valve Type KDC
Nominal bore DN 65-200 mm. (2½ - 8 in.)
Classified for Fluid Group I (all refrigerants (toxic, non-toxic, flammable and non-flammable)) For further details / restrictions - see Installation Instruction
Maximum allowable working pressure and temperature range
Standard application PS40 bar (580 psi) at –60ºC/+150ºC (–76ºF/+302ºF)
Conformity and Assessment Procedure Followed
Category II III Module D1 B1+D
Certificate ID D1: 07 202 1321 Z 0045/0/01 B1: D:
07 202 0124 Z0657/4/0 07 202 1321 Z 0045/0/01
Nominal bore DN65-80 mm. (2½-3 in.) DN100 - 200 mm. (4-8 in.) Name and Address of the Notified Body monitoring the Manufacturer’s Quality Assurance System and carried out the Inspection TÜV-NORD Systems GmbH & Co. KG.
Grosse Bahnstrasse 31 22525 Hamburg, Germany
(0045)
References of Harmonised Standards used
EN 10028-3 EN 10213-3 EN 10222-4 EN 12284
References of other Technical Standards and Specifications used
AD-Merkblätter DIN 3840 Authorised Person for the Manufacturer within the European Community Name: Steffen Nielsen Title: Director, Operations
Signature: Date: 16/08/2011
148B9742 rev.03
DECLARATION OF CONFORMITY The Pressure Equipment Directive 97/23/EC
Name and Address of Manufacturer within the European Community
Danfoss A/S Albuen 29 DK 6000 Kolding Denmark
Description of Pressure Equipment
Oil Regulating Valve, with 3 ports primary used for refrigerant compressor oil systems. Type ORV
Nominal bore DN32-80 mm. (1¼ - 3 in.) Classified for Fluid Group I (all refrigerants (toxic, non-toxic, flammable and non-flammable)) Maximum allowable working
pressure and temperature range
Standard applications 40 bar (580 psi) at –10ºC/+85ºC (14ºF/+185ºF)
Conformity and Assessment Procedure Followed
Category II
Module D1 Certificate ID 07 202 1321 Z 0045/0/01 Nominal bore DN32-80 mm. (1¼ - 3 in.) Name and Address of the Notified Body monitoring the Manufacturer’s Quality Assurance System and carried out the Inspection TÜV-NORD Systems GmbH & Co. KG.
Grosse Bahnstrasse 31 22525 Hamburg, Germany
(0045)
References of Harmonised Standards used
EN 10213-3 EN 12284
References of other Technical Standards and Specifications used
AD-Merkblätter DIN 3840 Authorised Person for the Manufacturer within the European Community Name: Steffen Nielsen Title: Director, Operations
Signature: Date: 16/08/2011
148B9738 rev 01
DECLARATION OF CONFORMITY The Pressure Equipment Directive 97/23/EC
Name and Address of Manufacturer within the European Community
Danfoss A/S Albuen 29 DK 6000 Kolding Denmark Description of Pressure Equipment Refrigerant float switch
Type AKS 38 Nominal bore DN32 mm. (1¼ in.)
Classified for Fluid Group I (all refrigerants (toxic, non-toxic, flammable and non-flammable))
Maximum allowable working pressure and temperature range
28 bar (406 psi) at –50ºC/+65ºC (–58ºF/+149ºF)
Conformity and Assessment Procedure Followed Category I
Module A
Nominal bore DN 32 mm (1¼ in.)
Name and Address of the Notified Body monitoring the Manufacturer’s Quality Assurance System TÜV-NORD Systems GmbH & Co. KG.
Grosse Bahnstrasse 31 22525 Hamburg, Germany
(0045)
References of Harmonised Standards used EN 1563 EN 12284 References of other Technical Standards and Specifications used AD-Merkblätter DIN 3840 Authorised Person for the Manufacturer within the European Community Name: Steffen Nielsen Title: Director, Operations
Signature: Date: 16/08/2011
148B9737 rev.05
DECLARATION OF CONFORMITY The Pressure Equipment Directive 97/23/EC
High pressure applications (DN 80-200)
Name and Address of Manufacturer within the European Community
Danfoss A/S Albuen 29 DK 6000 Kolding Denmark Description of Pressure Equipment Refrigerant check and stop-check valve, with straight or angle housing
Type CHV, SCA, CHV-SS,SCA-SS Nominal bore DN32-125 mm. (1¼ - 5 in.) Classified for Fluid Group I (all refrigerants (toxic, non-toxic, flammable and non-flammable))
Maximum allowable working pressure and temperature range
Standard applications 40* bar (580 psi) at –50ºC/+150ºC (–58ºF/+302ºF)
High pressure applications (DN 15-65)
50*/52* bar (754 psi) at –60ºC/+50ºC (–76ºF/+122ºF)
High pressure applications (DN 80-200)
50* bar (725 psi) at –60ºC/+50ºC (–76ºF/+122ºF)
*Actual Pressure marked on the valve
Conformity and Assessment Procedure Followed Category II III Module D1 B1+D
Certificate ID D1:07 202 1321 Z 0045/0/01 B1:07 202 0124 Z 0182/2/0001 D1:07 202 1321 Z 0045/0/01
Nominal bore
DN32-80 mm. (1¼ - 3 in.)
DN100-200 mm. (4-8 in.)
Name and Address of the Notified Body monitoring the Manufacturer’s Quality Assurance System and carried out the Inspection TÜV-NORD Systems GmbH & Co. KG.
Grosse Bahnstrasse 31 22525 Hamburg, Germany
(0045)
References of Harmonised Standards used EN 10028-3 EN 10213-3 EN 10222-4 EN 12284 References of other Technical Standards and Specifications used AD-Merkblätter DIN 3840 Name: Steffen Nielsen Title: Director, Operations
Signature: Date: 16/08/2011
148B9736 rev.05
DECLARATION OF CONFORMITY The Pressure Equipment Directive 97/23/EC
Name and Address of Manufacturer within the European Community
Danfoss A/S Albuen 29 DK 6000 Kolding Denmark
Description of Pressure Equipment
High pressure float valve Type HFI DN 100 and DN 150
Nominal bore DN100 and 150 mm. (4 in and 6 in.)
Classified for Fluid Group I – (All Refrigerants (toxic, non-toxic, flammable and non-flammable))
Maximum allowable working pressure and temperature range
Type 1: Ps 28 bar at –50ºC (-58ºF) to 80ºC (176ºF) Type 2: Ps MAX 40 bar at -50ºC (-58ºF) to 80ºC (176ºF) Actual Ps pressure : see name plate
Conformity and Assessment Procedure Followed
Category III Module B1+D
Certificate ID B1: 07 202 0511 Z 0094/1/H D: 07 202 1321 Z 0045/0/01
Nominal bore Type 1+2 DN 100 and DN150 mm. (4 in. and 6 in.)
Name and Address of the Notified Body monitoring the Manufacturer’s Quality Assurance System and carried out the Inspection TÜV-NORD Systems GmbH & Co. KG.
Grosse Bahnstrasse 31 22525 Hamburg, Germany
(0045)
References of Harmonised Standards used
EN 10028-3 EN 12284 EN 10213-3 EN 10222-4
References of other Technical Standards and Specifications used AD-Merkblätter DIN 3840 Name: Steffen Nielsen Title: Director, Operations
Signature: Date: 16/08/2011
148B9732 – rev. 04
DECLARATION OF CONFORMITY The Pressure Equipment Directive 97/23/EC
Name and Address of Manufacturer within the European Community
Danfoss A/S Albuen 29 DK 6000 Kolding Denmark
Description of Pressure Equipment
Refrigerant filter valve, with straight or angled bonnet arrangement Type FIA
Nominal bore DN250 - 300mm. (10 - 12 in.)
Classified for Fluid Group I (all refrigerants (toxic, non-toxic, flammable and non-flammable)) For further details / restrictions - see Installation Instruction
Temperature range and maximum allowable working pressure
PS35 bar (508 psi) at –90ºC → –40ºC (–130ºF → –40ºF) PS40 bar (580 psi) at –40ºC → + 60ºC (–40ºF → +140ºF) PS36 bar (522 psi) at +60ºC → + 80ºC (+140ºF → +176ºF) PS32 bar (464psi) at +80ºC → +120ºC (+176ºF → +248ºF) PS28 bar (406psi) at +120ºC → +150ºC (+248ºF → +302ºF)
Conformity and Assessment Procedure Followed Category III IV Module B1 + D B + D
Certificate ID B1 D:
07 202 0124 Z 0859/2/0001 07 202 1321 Z 0045/0/01
B: D:
07 202 0124 Z 0859/2/0001 07 202 1321 Z 0045/0/01
Nominal bore
Standard application DN250 mm. (10 in.) DN 300 mm. (12 in.)
Name and Address of the Notified Body monitoring the Manufacturer’s Quality Assurance System and carried out the Inspection TÜV-NORD Systems GmbH & Co. KG.
Grosse Bahnstrasse 31 22525 Hamburg, Germany
(0045)
References of Harmonised Standards used
EN 10028-3 EN 10213-3 EN 10222-4 EN 12284
References of other Technical Standards and Specifications used
AD-Merkblätter DIN 3840 Authorised Person for the Manufacturer within the European Community Name: Steffen Nielsen Title: Director, Operations
Signature: Date: 16/08/2011
148B9730 rev.04
DECLARATION OF CONFORMITY The Pressure Equipment Directive 97/23/EC
Name and Address of Manufacturer within the European Community
Danfoss A/S Albuen 29 DK 6000 Kolding Denmark
Description of Pressure Equipment
Refrigerant change over valve DSV
Nominal bore DN 32 mm. (1¼ in.)
Classified for Fluid Group I (all refrigerants (toxic, non-toxic, flammable and non-flammable)) For further details / restrictions - see Installation Instruction
Maximum allowable working pressure and temperature range
Standard application PS40 bar (580 psi) at –50ºC/+100ºC (–58ºF/+212ºF)
Restrictions Could only be used in systems in conjunction with two SFA15, SFV20 or SFV25 (Max. 3% pressure drop in upstream line according to prEN13136)
Conformity and Assessment Procedure Followed
Category II Module D1
Certificate ID
D1:07 202 1321 Z 0045/0/01
Nominal bore DN 32 mm. (1¼ in.) Name and Address of the Notified Body monitoring the Manufacturer’s Quality Assurance System and carried out the Inspection TÜV-NORD Systems GmbH & Co. KG.
Grosse Bahnstrasse 31 22525 Hamburg, Germany
(0045)
References of Harmonised Standards used
EN 10028-3 EN 10213-3 EN 10222-4 EN 12284
References of other Technical Standards and Specifications used
AD-Merkblätter DIN 3840 Authorised Person for the Manufacturer within the European Community Name: Steffen Nielsen Title: Director, Operations
Signature: Date: 16/08/2011
148B9727 rev 05
DECLARATION OF CONFORMITY The Pressure Equipment Directive 97/23/EC
Name and Address of Manufacturer within the European Community
Danfoss A/S Albuen 29 DK 6000 Kolding Denmark
Description of Pressure Equipment
Refrigerant two step gas powered stop valve Type GPLX
Nominal bore DN 80-150 mm. (3 – 6 in.)
Classified for Fluid Group I (all refrigerants (toxic, non-toxic, flammable and non-flammable)) For further details / restrictions - see Installation Instruction
Maximum allowable working pressure and temperature range
Standard application PS40* bar (580 psi) at –60ºC/+150ºC (–76ºF/+302ºF) High pressure
application PS50* bar(725psi) at –90ºC/+50ºC (–130ºF/+122ºF)
PS40bar(580psi) at +50ºC/+150ºC (+122ºF/+302ºF) * Actual pressure marked on the valve Conformity and Assessment Procedure Followed Category II III Module D1 B1+D
Certificate ID D1: 07 202 1321 Z 0045/0/01 B1: D:
07 202 0124 Z0289/2/0001 07 202 1321 Z 0045/0/01
Nominal bore DN 80 mm. (3 in.) DN100 - 150 mm. (4-6 in.) Name and Address of the Notified Body monitoring the Manufacturer’s Quality Assurance System and carried out the Inspection TÜV-NORD Systems GmbH & Co. KG.
Grosse Bahnstrasse 31 22525 Hamburg, Germany
(0045)
References of Harmonised Standards used
EN 10028-3 EN 10213-3 EN 10222-4 EN 12284
References of other Technical Standards and Specifications used
AD-Merkblätter DIN 3840 Authorised Person for the Manufacturer within the European Community Name: Steffen Nielsen Title: Director, Operations
Signature: Date: 16/08/2011
148B9724 – rev. 04
DECLARATION OF CONFORMITY The Pressure Equipment Directive 97/23/EC
Name and Address of Manufacturer within the European Community
Danfoss A/S Albuen 29 DK 6000 Kolding Denmark
Description of Pressure Equipment
Refrigerant float valve. Type SV4-6
Classified for Fluid Group I (all refrigerants (toxic, nontoxic, flammable and nonflamable)) For further details / restrictions - se Installation Instruction
Maximum allowable working pressure SV4, SV5 and SV6 28 bar (406 psi) –50ºC/+120ºC (–58ºF/+248ºF)
Conformity and Assessment Procedure Followed
Category II Module D1 Certificate ID 07 202 1321 Z 0045/0/01 Name and Address of the Notified Body monitoring the Manufacturer´s Quality Assurance System Name and carried out the Inspection TÜV-NORD Systems GmbH & Co. KG.
Grosse Bahnstrasse 31 22525 Hamburg, Germany
(0045)
References of Harmonised Standards used
EN 1563 EN12284 EN10028
References of other Technical Standards and Specifications used
DIN 17173 AD-Merkblätter Authorised Person for the Manufacturer within the European Community Name: Steffen Nielsen Title: Director, Operations
Signature: 16/08/2011 Date:
148B9723 rev. 07
DECLARATION OF CONFORMITY The Pressure Equipment Directive 97/23/EC
Name and Address of Manufacturer within the European Community
Danfoss A/S Albuen 29 DK 6000 Kolding Denmark Description of Pressure Equipment Refrigerant filter, with straight or angle housing
Type FIA and FIA-SS Nominal bore DN32-200 mm. (1¼ - 8 in.) Classified for Fluid Group I (all refrigerants (toxic, non-toxic, flammable and non-flammable))
Maximum allowable working pressure
Standard applications 40* bar (580 psi) at –60ºC/+150ºC (–76ºF/+302ºF)
High pressure applications (DN 15-65)
52* bar (754 psi) at –60ºC/+50ºC (–76°F/+122ºF)
High pressure applications (DN 80-200)
50* bar (725 psi) at –60ºC/+50ºC (–76ºF/+122ºF)
*Actual pressure marked on the valve
Conformity and Assessment Procedure Followed Category II III Module D1 B1+D
Certificate ID D1:07 202 1321 Z 0045/0/01
B1:07 202 0511 Z 0111/1/H D:07 202 1321 Z 0045/0/01
Nominal bore
Standard applications High pressure applications
DN32-80 mm. (1¼ - 3 in.)
DN100-200 mm. (4-8 in.)
Name and Address of the Notified Body monitoring the Manufacturer’s Quality Assurance System Name and carried out the Inspection TÜV-NORD Systems GmbH & Co. KG.
Grosse Bahnstrasse 31 22525 Hamburg, Germany
(0045)
References of Harmonised Standards used EN 10028-3 EN 10213-3 EN 10222-4 EN 12284 References of other Technical Standards and Specifications used AD-Merkblätter DIN 3840 Authorised Person for the Manufacturer within the European Community Name: Steffen Nielsen Title: Director, Operations
Signature: Date: 16/08/2011
148B9721 rev. 03
DECLARATION OF CONFORMITY The Pressure Equipment Directive 97/23/EC
Name and Address of Manufacturer within the European Community
Danfoss A/S Albuen 29 DK 6000 Kolding Denmark
Description of Pressure Equipment
Refrigerant float valve. Type SV1-3
Classified for Fluid Group I (all refrigerants (toxic, nontoxic, flammable and nonflamable)) For further details / restrictions - se Installation Instruction
Maximum allowable working pressure and temperature range
SV1 and SV3 28 bar (406 psi) –50ºC/+65ºC (–58ºF/+149ºF)
Conformity and Assessment Procedure Followed
Category I Module A Certificate ID - Name and Address of the Notified Body monitoring the Manufacturer’s Quality Assurance System
TÜV-NORD Systems GmbH & Co. KG. Grosse Bahnstrasse 31 22525 Hamburg, Germany
References of Harmonised Standards used
EN12284 EN 10213-3
References of other Technical Standards and Specifications used
AD-Merkblätter Authorised Person for the Manufacturer within the European Community Name: Steffen Nielsen Title: Director, Operations
Signature: 16/08/2011 Date:
148B9720 – rev. 03
DECLARATION OF CONFORMITY The Pressure Equipment Directive 97/23/EC
Name and Address of Manufacturer within the European Community
Danfoss A/S Albuen 29 DK 6000 Kolding Denmark
Description of Pressure Equipment
Pilot operated internal safety valve Type POV 600, 1050 and 2150
Nominal bore DN40-80 mm. (1½ - 3 in.)
Classified for Fluid Group I (all refrigerants (toxic, non-toxic, flammable and non-flammable)) For further details / restrictions - se Installation Instruction
Restrictions POV 600, 1050 and 2150 Only for use in conjunction with BSV 8.
Maximum allowable working pressure and temperature range
POV 600, 1050 and 2150 40 bar (580 psi) –50ºC/+150ºC (–58ºF/+302ºF)
Conformity and Assessment Procedure Followed
Category II Module D1 Certificate ID D1: 07 202 1321 Z 0045/0/01
Nominal bore DN40-80 mm. (1½ - 3 in.) Name and Address of the Notified Body monitoring the Manufacturer’s Quality Assurance System, and carried out the Inspection TÜV-NORD Systems GmbH & Co. KG.
Grosse Bahnstrasse 31 22525 Hamburg, Germany
(0045)
References of Harmonised Standards used
EN10213-3 EN 12284
EN10222-4 EN13136
References of other Technical Standards and Specifications used
AD-Merkblätter Authorised Person for the Manufacturer within the European Community Name: Steffen Nielsen Title: Director, Operations
Signature: Date: 16/08/2011
148B9717 rev.07
DECLARATION OF CONFORMITY The Pressure Equipment Directive 97/23/EC
Name and Address of Manufacturer within the European Community
Danfoss A/S Albuen 29 DK 6000 Kolding Denmark Description of Pressure Equipment Refrigerant regulating valve, with straight or angle housing
Type REG and REG-SS Nominal bore DN27- 65 mm. (11/8 - 2 ½ in.) Classified for Fluid Group I (all refrigerants (toxic, non-toxic, flammable and non-flammable)) Maximum
allowable working pressure and temperature range
Standard applications (REG-SS) Standard applications (REG) High pressure applications (REG-SS) High pressure applications (REG)
40 bar (580 psi) at –60ºC/+150ºC (–76ºF/+302ºF) 40 bar (580 psi) at –50ºC/+150ºC (–58ºF/+302ºF) 52 bar (754 psi) at –60ºC/+50ºC (–76ºF/+122ºF) 52 bar (754 psi) at –50ºC/+50ºC (–58ºF/+122ºF)
*Actual pressure marked on the valve
Conformity and Assessment Procedure Followed Category II
Module D1 Certificate ID 07 202 1321 Z 0045/0/01 Nominal bore DN27-65 mm. (11/8 - 2 ½ in.) Name and Address of the Notified Body monitoring the Manufacturer’s Quality Assurance System, and carried out the Inspection
TÜV-NORD Systems GmbH & Co. KG. Grosse Bahnstrasse 31 22525 Hamburg, Germany
(0045)
References of Harmonised Standards used EN 10028-3 EN 10213-3 EN 10222-4 EN 12284 References of other Technical Standards and Specifications used AD-Merkblätter DIN 3840 Authorised Person for the Manufacturer within the European Community Name: Steffen Nielsen Title: Director, Operations
Signature: Date: 15/08/2011
148B9714 rev. 04
DECLARATION OF CONFORMITY The Pressure Equipment Directive 97/23/EC
Name and Address of Manufacturer within the European Community
Danfoss A/S Albuen 29 DK 6000 Kolding Denmark
Description of Pressure Equipment
Refrigerant safety valve Type SFA 15, SFV 20 and 25
Nominal bore 13 mm. (0,512 in.) for SFA 15 18 mm. (0,709 in.) for SFV 20 23 mm. (0,906 in.) for SFV 25
Classified for Fluid Group I (all refrigerants (toxic, non-toxic, flammable and non-flammable)) For further details / restrictions - se Installation Instruction
Maximum allowable working pressure and temperature range
SFA 15
10-40 bar (143-580 psi) –50ºC/+100ºC (–58/+212ºF)
SFV 20-25 10-25 bar (143-362 psi) –50ºC/+100ºC (–58/+212ºF)
Conformity and Assessment Procedure Followed
Category IV Module B+D
Certificate ID B: D:
07 202 0511 Z 0078/1/H-0001 07 202 1321 Z 0045/0/01
Nominal bore 13 mm. (0,512 in.) for SFA 15 18 mm. (0,709 in.) for SFV 20 23 mm. (0,906 in.) for SFV 25
Name and Address of the Notified Body monitoring the Manufacturer’s Quality Assurance System and carried out the Inspection TÜV-NORD Systems GmbH & Co. KG.
Grosse Bahnstrasse 31 22525 Hamburg, Germany
(0045)
References of Harmonised Standards used
EN 10213-3 EN 12284 EN 10222-4 EN 13136
References of other Technical Standards and Specifications used
AD-Merkblätter
Name: Steffen Nielsen Title: Director, Operations
Signature: Date: 15/08/2011
148B9713 – rev.03
DECLARATION OF CONFORMITY The Pressure Equipment Directive 97/23/EC
Name and Address of Manufacturer within the European Community
Danfoss A/S Albuen 29 DK 6000 Kolding Denmark
Description of Pressure Equipment
Refrigerant safety valve Type BSV 8
Nominal bore 8mm. (0,315 in.) for BSV 8
Classified for Fluid Group I (all refrigerants (toxic, non-toxic, flammable and non-flammable)) For further details / restrictions - se Installation Instruction
Maximum allowable working pressure and temperature range
BSV 8
10-25 bar (143-362 psi) –50ºC/+100ºC (–58ºF/+212ºF)
Conformity and Assessment Procedure Followed
Category IV Module B+D
Certificate ID B: D:
07 202 0511 Z 0078/1/H-0002 07 202 1321 Z 0045/0/01
Nominal bore 8mm. (0,315 in.) for BSV 8
Name and Address of the Notified Body monitoring the Manufacturer’s Quality Assurance System, and carried out the Inspection
TÜV-NORD Systems GmbH & Co. KG. Grosse Bahnstrasse 31 22525 Hamburg, Germany
(0045)
References of Harmonised Standards used
EN 10222-4 EN 13136 EN 10213-3 EN 12284
References of other Technical Standards and Specifications used AD-Merkblätter Authorised Person for the Manufacturer within the European Community Name: Steffen Nielsen Title: Director, Operations
Signature: Date: 15/08/2011
148B9710 rev.07
DECLARATION OF CONFORMITY The Pressure Equipment Directive 97/23/EC
Name and Address of Manufacturer within the European Community
Danfoss A/S Albuen 29 DK 6000 Kolding Denmark
Description of Pressure Equipment
Refrigerant stop valve, with straight or angle housing Type SVA-ST, SVA-HS and SVA-SS
Nominal bore DN32-200 mm. (11/4-8 in.) Classified for Fluid Group I (all refrigerants (toxic, non-toxic, flammable and non-flammable))
Standard applications: SVA-ST 40* bar (580 psi) at –50°C/+150°C (-58°F/+302°F) SVA-HS 40* bar (580 psi) at –60°C/+150°C (-76°F/+302°F) SVA-SS (DN 15-65) 52* bar (754 psi) at –60°C/+50°C (-76°F/+122°F) SVA-SS (DN 80-125) 50* bar (725 psi) at –60°C/+50°C (-76°F/+122°F) High pressure applications: SVA-ST (DN-15-65) 52* bar (754 psi) at –50°C/+50°C (-58°F/+122°F) SVA-ST (DN-80-200) 50* bar (725 psi) at –50°C/+50°C (-58°F/+122°F)
*Actual pressure marked on the valve
Conformity and Assessment Procedure Followed
Category II III Module D1 B1+D
Certificate ID D1:07 202 1321 Z 0045/0/01 B1:07 202 0511 Z 0110/1/H B1:07 202 0511 Z 0058/1H D:07 202 1321 Z 0045/0/01
Nominal bore
DN32-65 mm. (11/4 - 2 1/2 in.)
DN80-200 mm. (3-8 in.)
Name and Address of the Notified Body monitoring the Manufacturer’s Quality Assurance System carried out the Inspection
TÜV-NORD Systems GmbH & Co. KG. Grosse Bahnstrasse 31 22525 Hamburg, Germany
(0045)
References of Harmonised Standards used
EN 10028-3 EN 10213-3 EN 10222-4 EN 10213-4 EN 12284
References of other Technical Standards and Specifications used
AD-Merkblätter DIN 3840 Authorised Person for the Manufacturer within the European Community
Name: Steffen Nielsen Title: Director, Operations
Signature: Date: 15/08/2011
148B9706 rev.07
DECLARATION OF CONFORMITY The Pressure Equipment Directive 97/23/EC
Name and Address of Manufacturer within the European Community
Danfoss A/S Albuen 29 DK 6000 Kolding Denmark
Description of Pressure Equipment
Refrigerant check valve, with straight housing Type NRVA
Nominal bore DN32-65 mm. (1¼ - 2½ in.) Classified for Fluid Group I (all refrigerants (toxic, non-toxic, flammable and non-flammable)) Maximum allowable working
pressure and temperature range Standard applications 40 bar (580 psi) at –50ºC/+140ºC (–58ºF/+284ºF)
Conformity and Assessment Procedure Followed
Category II Module D1 Certificate ID 07 202 1321 Z 0045/0/01
Nominal bore DN32-65 mm. (1¼ - 2½ in.) Name and Address of the Notified Body monitoring the Manufacturer’s Quality Assurance System and carried out the Inspection TÜV-NORD Systems GmbH & Co. KG.
Grosse Bahnstrasse 31 22525 Hamburg, Germany
(0045)
References of Harmonised Standards used
EN 10028-3 EN 10213-3 EN 12284
References of other Technical Standards and Specifications used
AD-Merkblätter Name: Steffen Nielsen Title: Director, Operations
Signature: Date: 15/08/2011
148B9704 – rev.07
DECLARATION OF CONFORMITY The Pressure Equipment Directive 97/23/EC
Name and Address of Manufacturer w ithin the European Community
Danfoss A/S Albuen 29 DK 6000 Kolding Denmark
Description of Pressure Equipment
Refrigerant discharge check valve Type PM, PML, PMLX, PMFL, PMFH
Nominal bore DN 32-150 mm . (1¼ – 6 in.)
Classif ied for Fluid Group I (all refrigerants (toxic, non-toxic, f lammable and non-flammable)) For further details / restrictions - see Installation Instruction
Maximum allow able w orking pressure and temperature range
Standard application PS28 bar (406 psi) at –60ºC/+120ºC (–76ºF/+248ºF)
Conformity and Assessment Procedure Followed
Category II III Module D1 B1+D
Certif icate ID D1: 07 202 1321 Z 0045/0/01 B1: D:
07 202 0511 Z 0074/1/H 07 202 1321 Z 0045/0/01
Nominal bore DN 32-125 mm. (1¼ - 5 in.) DN150 mm. (6 in.) Name and Address of the Notified Body monitoring the Manufacturer’s Quality Assurance System and carried out the Inspection TÜV-NORD Systems GmbH & Co. KG.
Grosse Bahnstrasse 31 22525 Hamburg, Germany
(0045)
References of Harmonised Standards used
EN 10028-3 EN 10213-3 EN 10222-4 EN 12284
References of other Technical Standards and Specifications used
DIN 3840 Authorised Person for the Manufacturer w ithin the European Community Name: Steffen Nielsen Title: Director, Operations
Signature:
Date: 26/09/2012
148B9755 rev 01
MANUFACTOR DECLARATION
Name and Address of Manufacturer within the European Community
Danfoss A/S Albuen 29 DK 6000 Kolding Denmark
Declaration
We hereby declare that below mentioned equipment are Classified for Fluid Group II (non-toxic and non-flammable refrigerants), and that all are covered by Article 3, paragraph 3 of The Pressure Equipment Directive 97/23/EC.
Description of Pressure Equipment Electrically operated modulating control valves
Type CCM
Classified for Fluid group II (non-toxic and non-flammable refrigerants) Temperature range -40°C/ +60°C (-40°F/+140°F) Max. working pressure 90 barg (1305 psig)
Compliance with EU Directive 2002/95/EC (RoHS)
This product confirms to the restriction of the use of lead, mercury, cadmium, hexavalent chromium, polybrominated biphenyls (PBB), and polybrominated diphenyl ethers (PBDE) as described in Directive 2002/95/EC of January 2003 with the amendments in Commission Decision 2005/618/EC of 18 August 2005.
References to Technical Standards and Specifications used EN 12284
Authorised Person for the Manufacturer within the European Community Name: Steffen Nielsen Title: Director, Operations
Signature: Date: 17/08/2011