KISTNER GmbH & Co. KG | Industriestraße 7 95349 Thurnau | +49 92289870 | www.maschinen-kistner.de

DECKEL MAHO DMC 125 U hi-dyn

5 sides universal machining center

Manufacturer DECKEL MAHO Model DMC 125 U hi-dyn Manufacture year 2002 Control HEIDENHAIN iTNC 530 Machine number 11210001033 Travels X - 1.250 mm / Y - 880 mm / Z - 800 mm NC rotary table with pallet changer / 4 pallets

LINK to the machine

2 - DECKEL MAHO DMC 125 U hi-dyn

EQUIPMENT

Autom. swivel milling head autom. conversion from vertical to horizontal machining

4th axis swivelling range 360 x 0,001 degree

NC rotary table with pallet changer

4 pallets with hole pattern 1.000 x 800 mm

Turning speed max. 4th axis 10,3 1/min

Production package 40 bar / 23 l/min

Internal cooling through the spindle middle (AD), capacity of the coolant tank approx. 900 l

Tool magazine, chain 120 places

Direct measuring system

Centering bore 50 H6 mm

Permissible table load (table center) 1.500 kg

Clamping grid: 100 x 100, M 16 mm

Chip conveyor (rake conveyor)

Motor spindle 18.000 1/min

Drive type AC

Tool holder HSK-A63 according to DIN 69893

Electronic hand wheel

Full protection cabin

Probe HEIDENHAIN infrared TS 631

Oil / emulsion mist separator

Tool breakage detection

Tool measurement in the workspace, Blum Laser

Cone cleaning for tool holders

Mode 4, extended manual intervention

Rinsing gun with pump 1 bar / 40 l/min

Cooling device blowing air through spindle center

Coolant temperature control, heat and cool

User manual / Documentation / Machine parameters

TECHNICAL DATA

Working area X-axis 1.250 mm

Y-axis 880 mm

Z-axis 800 mm

Feed drive AC brake motors for axis X,Y,Z

Feed speed (X,Y,Z), stepless programmable 20 – 10.000 mm/min

Rapid traverse (X,Y,Z) 40 m/min

Set-up mode (X,Y,Z) 20 – 2.000 mm/min

Measuring system Resolution (X,Y,Z) 0,001 mm

Working spindle HSK

Tool holder cone hollow shaft HSK-A63 DIN 69893

Tool clamping hydraulic/mechanical

3 - DECKEL MAHO DMC 125 U hi-dyn

Tool changer with magazine Magazine places 120

Max. tool-Ø (with occupancy of all seats) 80 mm

Max. tool-Ø (with free adjacent places) 160 mm

Max. tool length from spindle nose

- with tool breakage monitoring 380 mm

Max. tool weight, with automatic tool changer 10 kg Pallet changer Number of the pallets 2

Permissible load of the pallet changer

- unilateral (Bild 1) 1.000 kg

- two-sided (Bild 2) Weight difference between the pallets must not exceed the value of 1,000 kg

Main drive

Motor spindle without gear

Speed, stepless programmable 20 – 18.000 min-1

in set-up mode 20 – 800 min-1

4 - DECKEL MAHO DMC 125 U hi-dyn

Working table, NC rotary table Clamping surface, pallet 800 x 1.000 mm

Centering bore Ø 50 H6 20 deep mm

Max. torque 2.765 Nm

Holding torque of the table top at:

- 100% 2.461 Nm

- 60% 3.026 Nm

- 40% 3.709 Nm

- 25% 4.618 Nm

Max. rotation of the table plate 10,3 rpm

Feed 3.600°/min

Resolution of the measuring system 0,001°

5 - DECKEL MAHO DMC 125 U hi-dyn

Magazine assignment HSK-A63

6 - DECKEL MAHO DMC 125 U hi-dyn

Tool limit dimensions with automatic tool change

7 - DECKEL MAHO DMC 125 U hi-dyn

MACHINE PICTURES

8 - DECKEL MAHO DMC 125 U hi-dyn

9 - DECKEL MAHO DMC 125 U hi-dyn

WORKING AREA DIMENSIONS

10 - DECKEL MAHO DMC 125 U hi-dyn

FLOOR PLAN

11 - DECKEL MAHO DMC 125 U hi-dyn

FOUNDATION PLAN

12 - DECKEL MAHO DMC 125 U hi-dyn

ARRANGMENT of MACHINE SUPPORT

13 - DECKEL MAHO DMC 125 U hi-dyn

*We do not guarantee the accuracy and completeness of these documents. We further do not assure any characteristics and qualities. The named machine, which is up for sale, is used.*

Thank you very much for your interest

KISTNER GmbH & Co. KG | Industriestrasse 7 95349 Thurnau | +49 92289870 | www.maschinen-kistner.de

LINK to the machine