Decarlo eng

WindowsF U R N I S H I N G YO U R H O M E

Direction: Gennaro DuranteArt Direction: Marlene DoerrieGraphic Design: GFCAssociatiPrint: Stampa Sud S.p.A.

Product illustrations and descriptions in this catalogue are only for reference.De Carlo Ltd reserves the right to make any esthetic and/or functional changes in all of its products when necessary for commercial ormanufacturing needs, without prior notice. De Carlo declines all responsibilities for any printing errors and omissions.De Carlo, 2015.All rights reserved.

DE CARLO CATALOGUE 2015

www.decarlo.it

UNI EN ISO 9001 Quality SystemMark of responsible forestry FSC

Discover the De Carlo Collections

DE CARLO CASA S.R.L.Via Appias.s.7 km 633.15074016 Massafra (TA)Tel +39 099 [email protected]

www.decarlo.it

UNI EN ISO 9001 Quality SystemPEFC and FSC Sustainable forest management system

Discover the De Carlo Collections

pag.

Company 3

Logistics, assistance and installation 5

Finishing 6

Product testing laboratory 7

Laminated wood and forest management 8

CE Marking 10

Glazing 12

Windows 15

Minimal Wood 16

Wood Design 26

Wood WGlass 38

Wood Classic 42

Wood Arte 50

Exter Alu Design 58

Exter WGlass 70

Exter Alu Classic 76

Exter Alu Arte 84

Exter Verbund 86

Exter Bronze 88

Exter Glass 96

dWall 106

Entry doors 116

Shutters 130

Roll Flap shutter system 142

Product combinations 148

Handles 149

Anti-intrusion hardware 150

Woods and finishes 152

RAL painting on flat wood frame 153

Wood Finishes 154

Warranty 160

Index

1

In the photo: Domenico De Carlo (the first on the left)

2

Company

Thanks to the 50-year long experience, De Carlo is the most appreciated company in Italy with reference to wood and wood-aluminum windows. Windows, sliding windows, lift and slide doors, shutters, front doors, curtain walls available in the traditional lines (“arte” collection), classic lines (“classic” collection) and contemporary lines (“design” collection), for every kind of opening (sash, slide, pivot, awning, bull’s-eye).

De Carlo’s partners of the sales network have got a long-time experience in designing and making windows and special doors, from the design of the best solutions for the customer to the assistance for the installation, including the management of the building site measures.

Moreover, the technical office assists the customer in planning and testing the thermal and acoustic parameters of the house, in compliance with the national legislation, in order to protect the technical and commercial partners’ responsibilities.

All technical details are available on www.decarlo.it (see “De Carlo lab” section).

Today: The factory for the production of windows in San Basilio - Mottola (TA)

The photovoltaic installation produces the whole energy supply for the manufacturing (1.348.000 KWH in a year).

Department manual sanding

3

4

Logistics, assistance and installation

We take the utmost care of the different stages of this service, from the preparation of the product to the handling and transport up to the building site.

The new packing system for the windows provides the covering of the whole product, taking particular care of the corners where a shaped cardboard shell and a resistant shrinkable film provide a high protection against the possible impacts during the management of the windows in the building site.

Besides, the labeling of each piece gives all the information about the product and its dislocation in the installation department.

A great number of vehicles that serve all the national territory and that are exclusively dedicated to customers, assures maximum efficiency, rapidity and care during all the stages of products transport.

“The Guide for Windows” with the instructions about how to use and take care of the windows will be delivered together with the windows and a personal code of identification to facilitate any request for assistance after sale.

Skilled and specialized technicians assure the installers’ training according to the peculiarity of the sealing joint between the window and the wall, so as to assure air and water tightness between frame and counter-frame, and to avoid the noise diffusion.

5

Finishing

The colored coating contains particular pigments which, seeping through the wood, avoids its alteration caused by the UV rays so

preventing from any contaminations of fungi and bacteria.The intermediate coat stabilizes the wood fibers in order to limit

the micro-variations of the window dimensions caused by the variability of the weather conditions.

The application of the external and of the intermediate coating is carried out in a flow-coating systems, which assures the complete and accurate

painting of the window in all its parts. The hand sanding of all the windows makes the surface extremely regular

without any roughness, to enhance the beauty of the window.

The finish, carried out in electrostatic equipments with a controlled atmosphere, grants the right quantity of painting on the window in order

to assure a perfect covering and protection of the wood so exalting, in the same time, the beauty of the material.

De Carlo, after an exclusive and successful experimentation, is the first company to use a particular water paint, which is the result of a process

based on nanotechnology, for the finishing cycles.Thanks to this new technology, the covering particles are 1000 times

smaller than those of the traditional water paints.The optimization of these chemical-physical characteristics

of paint assures a better adhesion of the paint to the roughness of the wood. All this grants a longer life and an excellent preservation

of the esthetic features of the product.TRADITIONAL FINISH

NANOTECH FINISH

Frames in the finishing department

De Carlo’s warranty certificate - Finishing

De Carlo’s case for colors - wood finishes

6

Product testing laboratory

A research project made in collaboration with the Pro.Ge.S.A. department (Planning and Management of Agricultural and Forestry systems) at the University of Bari, has given life to a lab in the same plant, promoting the research and development of finishing products.Every day the lab, provided with state of the art equipments, represents the best and continuous way of checking the whole finishing process: from the verification of acceptance of the finishing products, to the control of environmental parameters of the finishing system; from the evaluation of suppliers and of the proposed painting cycles, to the quality control of the applied finishes.

For the most demanding customers, the existent equipment allows the supply of customized colors thanks to a spectrophotometer and an associated tintometric system.

The activities concerning development and experimentation widely improve the knowledge about the combinations of different kinds of wood and paintings by using a system for simulated weathering conditions, which simulates, in a short time, the effects of weathering (rain, UV rays, humidity, thermal variations) on the finish.

System for the electronic measure of the dry residue of the finish Testing of the finishing through the Simulated Weathering Equipment

7

Laminated Wood

The laminated product is obtained from three layers of wood glued together with cross-

directional fibers so as to balance the natural tension of the wood structure and ensure the stability of the window/door. For each kind of

wood used, pine, mahogany, oak, Douglas, larch, walnut, teak, specific drying parameters are established in collaboration with qualified

suppliers, in order to ensure a durable product.

Forest Protection

De Carlo products are made of wood from sustainable forestry.

De Carlo is a FSC® certified company.

Ask for certified products.

The air quality in your home

Ensuring clean air in your home is essential, especially for your health. Much has

been already done by removing unhealthy substances from building materials such as

lead, asbestos, formaldehyde etc...However, even now, in our houses there are

many pollutants. Volatile chemicals released by some products, windows, plastics, paints,

rubber materials, new furniture, are harmful substances which can affect the air quality inside the house resulting severe diseases. As for pollution due to such materials it is

important to opt for more natural products: hemp wool for insulation, wood for windows,

water-based paints, etc...Even though in Italy there are no standards

monitoring VOC (volatile organic compounds) emissions, De Carlo group has tested its products according to the

international standard examination so as to ensure its windows are “healthy”. De Carlo

windows have VOC emission levels of class A+* (tested according to the UNI EN ISO

16000-9). A “label A +” is the guarantee of a healthy air in your living space.

*Information about the emission level of volatile substances in the air inside the house that present a risk of inhalation on a scale from A+ class (low emissions)

to C (high emission level) - Ministry of Ecology Decree of the French Republic, April 19, 2011.

8

9

Air tightness

It’s the peculiarity of a closed window not to let the air in when a difference between internal and external pressure occurs.The main manufacturing characteristics of De Carlo’s windows which ensure air tightness (see the test certificate in compliance with UNI EN 1026) are: the stability of sashes and frames ( made of laminated wood and cross-directional fibers); the perimeter sealing of the glass; the opening system with a hardware provided with different locking points; the joining system with an airlock; a double gasket made of anti-wear thermoplastic elastomer (resistant to fields of application which go from -40° to 120°C).

Water tightness

It’s the window capacity of avoiding the infiltration of water even with a strong wind. It’s the hardest test, because the window is hit by an high pressure water jet. The water loss recorded at a particular level of pressure allows the classification of the window in its tightness class; De Carlo’s windows are tested in order to reach the highest level of tightness (see test certificate in compliance with UNI EN 1027).

Wind resistance

It’s the capacity of resisting to strong pressure and/or depression, as for those caused by the wind, keeping an acceptable deformation and preserving its propriety of protecting the users’ safety. The window undergoes hard and heavy differences of pressure in order to test if its functional characteristics are perfectly preserved. In compliance with UNI EN 12210, the window can be classified into five classes as regard the wind pressure; De Carlo’s windows have successfully passed the tests of C5 class (the highest class of performance, see test certificate).

In compliance with these requirements the test results of De Carlo’s windows are:- Air tightness: class 4 (class of maximum performance)- Water tightness: class E1200 (experimental class of maximum performance)- Wind tightness: class C5 (class of maximum performance)

EC conformity Marking

10

Sound insulation

Rw: it’s a soundproofing standardized index measured in Decibels (db). The bigger is its value, the higher is the insulation; it is, however, necessary to remember that the scale of this coefficient is logarithmic and it’s important to underline how, for instance, an insulation of 35 db means to half the intensity of the sound in comparison with an insulation of 32 db. The characteristics of sound insulation of wood are unquestioned, but the soundproofing capacity of the window depends on the glass; De Carlo’s glasses Denergy maximize the insulation performances up to the value of noise abatement (Rw) of 40 db. These performances, tested in compliance with the International Standard ISO 140/30 in the reverberant double room of De Carlo lab, allow the acoustic comfort of the house even in case of heavy external noise pollution (city traffic, passage of vehicles, outdoor workplaces).

Anti-intrusion safety

Breaking-in and entering attempts are made using hand tools, for example screwdrivers, pliers and/or shims. The aim is to unhinge the sash from its frame or to break the glass to reach the handle.In addition to the standard safety characteristics of De Carlo’s windows, including the multi-locking point hardware, the customer can ask for a higher anti-intrusion coefficient (PLUS-CR2-CR3 base)* with safety glass (in combination with oak wood), a specific handle with a safety button or with removable keys, anti-intrusion hardware, and finally, a alarm system set up.The resistance class is established by the methods of testing according to the time we need to open the window (see UNI ENV1627). De Carlo’s anti-intrusion windows grant high levels of safety, preserving the same characteristics of thermal and acoustic insulation and the style of the Classic, Art and Design Wood lines.

*See pg 150-151 Safety Section

Thermal Transmittance (U-value)

More than 30% of the heat loss in a house passes through the windows. In order to minimize the heat loss, the external elements of the building must have a low value of transmittance.The thermal transmittance of windows (Uw) represents the average between the thermal transmittance of the frame (Uf) and the one of the glass (Ug). The declared values of transmittance are the results of tests and evaluations made in compliance with the European Standard UNI EN 14351-1 for EC marking.All De Carlo’s windows are fit for the energy certification of any climate area; the “Klima” lines reach coefficients of thermal transmittance suitable for eco-labeled Class A+ buildings.The class of energy needs of the building is determined by its architectural characteristics, which in turn the lines of De Carlo’s windows are fitted to.

11

Double glass Ug 1,1 Fs 55% Rw 36 dB

Triple glass Ug 0,7 Fs 45% Rw 37 dB



DenergySolarDenergy

Most of the heat in a house tends to go outwards; the 40% of this loss passes through the windows. The multi-layers insulating Denergy glasses, which are standardized on every De Carlo’s window, present a low-e coating that allows the preservation of the heat inside the building. As a result, the expense for the heating will be reduced, increasing the comfort of the house.

Wellness at homeEven in summer the heat intensity can be controlled so as to take maximum advantage of the big glass surfaces of the house all year long. Assuming that a traditional low-emission glazing produces a loss of 76% of the sun’s heat, it is better to use a thermo-regulating glass. De Carlo’s Denergy double glass is a thermo-regulating glass thanks to a special invisible coating with a capacity of reflecting and/or non-reflecting the sunlight which is higher than that of the ordinary panes. In winter, on the contrary, it preserves the heat inside the house.

Protection against the sun

Glasses

Invisible coating (coating)

Internal heat


38% SunFactor (FS)with double glass

34% SunFactor (FS)with triple glassInsideInside OutsideOutside

Configurable up to Ug 1,0 with double glazing and Ug with triple glazing Configurable up to a S.F. (Solar Factor) of 25%

12

Ug - Thermal transmittance of the glass - The lowest this value, the highest the thermal insulation capacityFs - Solar Factor - The lowest this value, the lowest the quantity of solar energy transmitted inside the building

Rw - Noise reduction of the window - The highest this value, the highest the acoustic insulation

Notes: These values refer to the glasses with Argon gas of De Carlo’s Wood collections

DenergyAcoustic

Noise is all around us and it is impossible to limit it at the source. That’s why we must protect ourselves, at the best, against it. In order to meet this need, Denergy Acoustic double glass grants an high acoustic insulation keeping noise pollution outside the building without altering the solar gain.

What do you hear?

DenergyTop

It has a double glass and an invisible coating with a high soundproofing capacity and a thermo-regulating performance.

Total protection





37% SunFactor (FS)with double glass

34% SunFactor (FS)with triple glass


41% Acoustic Insulation (dB)with double glass

39% Acoustic Insulation (dB)with triple glass

41% Acoustic Insulation (dB)with double glass

39% Acoustic Insulation (dB)with triple glassInsideOutside

Configurable up to a S.F. (Solar Factor) of 25% and Rw of 50 dBConfigurable up to Rw of 50 dB

13

14

The Windows Minimal Wood

WoodWood DesignWood WGlassWood ClassicWood Arte

Wood/AluminumExter Alu DesignExter Alu WGlassExter Alu ClassicExter Alu ArtExter Verbund

Wood/BronzeExter Bronze Classic

Wood/GlassExter Glass Design

dWall

15

MinimalWood

MinimalWood is the last line of De Carlo’s windows and doors; it is the answer to the most demanding market requirements. The reduction of the frame thickness in favor of a wider glass surface allows maximum daylight opening while keeping the utmost thermo-insulation performances (0,9 Uw). De Carlo MinimalWood windows and French doors are characterized by clean and essential lines. Find MinimalWood in www.decarlo.it and in www.decarlolab.it.

One sash French Door - Internal View

16

17

Sash detail - internal view

Sash detail

Sash and handle detail

One sash French door - external view - with Hidden Frame

18

19

French door, external view with hidden frame

Detail of French door and window threshold Sash detail, external side (only glass)

Sash detail

20

21

Detail of double-sash window

Sash detailDetail of double-sash window central section

Double-sash central section Double-sash window, external view “exposed frame” solution

22

23

Double-sash window, internal view

24

External windows and French doors, made with laminated wood profiles, fixed frame with a 87x90 mm section for three perimeter sides, with bottom profile of anodized aluminum in the external side and wood in the internal edge. Opening sash of 57 x 101 mm section. Squaring and profiling made for hardware system in air 12, deviation of locking points from the rotation axis with a 13 mm opening. Structural profile of polyamide.Opening mechanisms with multipoint hardware made of steel with copper-zinc parts and mushroom bolts for the perfect cohesion between sash and frame, with Top-coat treatment for better resisting corrosion and other atmosphere agents such as saline fogs and acids. Hardware components tested according DIN EN 1670 and EN ISO 9227 standards in compliance with the resistance requirements of class 5. Certificate of conformity to the standard ASTM B117-02 for

USA. Concealed hinges, adjustable on three axis with maximum load of 130 kg, with ABS clad gold, bronze or satin chrome colored. Double gasket inserted into the frame for thermal insulation made of thermoplastic elastomer (EPDM) resistant to the application fields from -40 to 120°C, and to aging caused by weathering, fine dust emissions and UV rays. Co-extruded internal foam gasket with rigid layer, tear-proof cord and flexible gasket components in order to soften the impact of closure. Coating cycles made by the application of nanotechnology water painting. Double or triple layer glass with thermal cut spacers, joined to the panes by a double structural perimeter seal, produced in compliance with EN 1279-5 (CE Marking insulating glasses). Layer glass fixed by structural sealing to wood support.

MinimalWood

Minimal Wood (double glass)

4

9A

C5

from 36 to 45 dB (*)

until CR2

1,31 a 1,36 W/m2k

A+

A

B

C

D

E

F

G

collection line frame glass window

Minimal Woodfir, pine

MW Uf=1,233.1/15 argon/33.1 BE

Uw=1,31Ug=1,1 FS=56%

Minimal Woodoak

MW Uf=1,4933.1/15 argon/33.1 BE

Uw=1,36Ug=1,1 FS=56%

Minimal Wood Plus (triple glass)

A+

A

B

C

D

E

F

G

4

9A

C5


until CR2

0,99 a 1,04 W/m2k


Minimal Wood Plusfir, pine

MW+ Uf=1,1433.1 BE/12 argon/4/12 argon/33.1 BE

Uw=0,99Ug=0,7 FS=45%

Minimal Wood Plusoak

MW+ Uf=1,433.1 BE/12 argon/4/12 argon/33.1 BE

Uw=1,04Ug=0,7 FS=45%

The declared values are carried out by tests and calculation in compliance with the European UNI EN 14351-1 law for the CE Conformity Marking of windows; the quality labeling “De Carlo Klima”is based on criteria of transparency, competence and impartiality granted by the producer in order to protect the final consumer. The declared values are calculations made by an analytic method on a window with a single sash 1230x1480mm of dimension. (*) Rw values of glass

The declared values are carried out by tests and calculation in compliance with the European UNI EN 14351-1 law for the CE Conformity Marking of windows; the quality labeling “De Carlo Klima”is based on criteria of transparency, competence and impartiality granted by the producer in order to protect the final consumer. The declared values are calculations made by an analytic method on a window with a single sash 1230x1480mm of dimension.(*) Rw values of glass

25

Wood Design

Ideal for modern or contemporary environments, the Design line is characterized by profiles with a linear and minimal shape (square glass-holder).

Triple lights French window with fixed sidelights26

27

Glazed wall with French door and lock

28

French door with tilt and turn operation, mosquito net and Roll Flap shutter system

Detail of an handle with anti-intrusion safety button

French door, detail of Wood Design Line in the CR3 anti-intrusion version

Wood Design 29

30

Glazed wall with French window and lock, made of brushed white painted laminated oak

Wood Design 31

32

Lift and slide door - outside view

Wood Design 33

Lift and slide door with fixed sash

34

Horizontal Section Horizontal Section

Vertical Section Vertical Section

Wood Design, ideal for modern and contemporary environments, the Design Line is characterized by linear profiles which gives a sober and minimal look to the window (see the square glass-holder in detail); also available in TL (top line) version for the 68 and 78 sections.Sash and frame (window and French window) of laminated wood. Safety low-e double glass “Denergy”, spacers with thermal cut (upon request).Double gaskets on the frame for thermal and acoustic insulation. Dripper made of wood. Threshold less than 25mm high (in compliance with the laws for removing the architectural barriers) with thermal cut (upon request) for French doors.Painting cycle with hand sanding and finish containing acrylic resins in water emulsion, finish with UV filters, 10-year De Carlo warranty.Perimeter sealing of the glass. Opening mechanism with multipoint hardware made of steel with copper-zinc parts, with self-adjusting bolts for the perfect adhesion between sash and frame, with Tricoat treatment for better resistance to corrosion, weathering, salt fogs and acids. Adjustable hinges in three dimensions in order to assure the correct functionality even when possible natural adjustments occur after installation.

Wood Design

The declared values are carried out by tests and calculation in compliance with the European UNI EN 14351-1 law for the CE Conformity Marking of windows; the quality labeling “De Carlo Klima”is based on criteria of transparency, competence and impartiality granted by the producer in order to protect the final consumer.(*) Rw values of glass

The declared values are carried out by tests and calculation in compliance with the European UNI EN 14351-1 law for the CE Conformity Marking of windows; the quality labeling “De Carlo Klima”is based on criteria of transparency, competence and impartiality granted by the producer in order to protect the final consumer.(*) Rw values of glass


Woodpine, larch, mahogany

68 Uf=1,433.1/15 argon/33.1 BE

Uw=1,3Ug=1,1 FS=56%

Woodoak

68 Uf=1,733.1/15 argon/33.1 BE

Uw=1,4Ug=1,1 FS=56%


Woodpine, larch

78Klima

Uf=1,333.1 BE/12 argon/4/12 argon/33.1 BE

Uw=0,96Ug=0,7 FS=45%

Woodoak

78Klima


Uw=1,0Ug=0,7 FS=45%

Lift and Slide Wood Design 78 (triple glass)Lift and Slide Wood Design 68 (double glass)

4

E1200

C5


until CR2

1,3 to 1,4 W/m2k

4

E1200

C5


until CR2

0,96 to 1,0 W/m2k

A+

A

B

C

D

E

F

G

A+

A

B

C

D

E

F

G

35

Wood Design 68 (double glass)


Woodpine, larch e mahogany

68 Uf=1,433.1/15 argon/33.1 BE

Uw=1,3Ug=1,1 FS=56%

Woodoak

68 Uf=1,733.1/15 argon/33.1 BE

Uw=1,4Ug=1,1 FS=56%

Wood Design 78 (triple glass)


Woodpine, larch

78 Uf=1,333.1 BE/12 argon/4/12 argon/33.1 BE

Uw=1,1Ug=0,7 FS=45%

Woodoak


Uw=1,3Ug=0,7 FS=45%



STANDARD CONFIGURATION ADDED OPTIONS

SashProfile 77 mm width (window and French door)Profile 107 mm width (front door with lock, sliding and pivot windows)

Profile 107 mm width (window, French door)Profile of the top and bottom transoms with customized width (for all versions)

Frame Section(window, French door)

Profile 80 mm width (with join mill or flush) Supplementary mill (customized for restructuring)

Dripper (window) Wood Aluminum

Type of opening (window and French door)

Sash Tilt and Turn

Anti-intrusion (see security section)

Opening mechanisms with multipoint hardware made of steel (with self-adjusting bolts)

Only for windows and French windowsAnti-intrusion base/Anti-intrusion Plus/ Anti-intrusion CR2Anti-intrusion CR3 (only oak, only single sash)

Central closing section (double sash window and French door)

With added mullion (symmetrical section) Without added mullion (asymmetric section)

Threshold Aluminum (silver, dark brown, white) Thermal cut/wood transom upon request

Hinges Multimatic (with Tricoat anticorrosion treatment, 10 year warranty) Concealed Multimatic (with Tricoat anticorrosion treatment, 10- year warranty)

Glass spacer Aluminum ( different colors) Thermal cut (grey, black, white)

Finish Smooth Aged (only pine, oak and larch)/brushed (only oak)

Bottom transom of the French door sash

Sash profile with a 107mm transom (also TL version)Two 77mm transoms (133mm high)/three 77mm transoms (188 mm high) /two 107 mm transoms (193 mm high)/three 107 mm (278 mm high)/customized single transom (from 108 to 400 mm high)/for TL version single option: customized single transom (from 108 to 400mm high)

Mouldings Three sides mouldings type A 35x9 / 45x9 /55x9) - type B (55x12) Mouldings with width bigger than 55mm

The updated technical sections of all typologies and systems are published on www.decarlolab.itThe above-mentioned characteristics can be updated and reported in the quotation document produced by the configuration software DCS 3.0

4

E1200

C5


until CR2

1,3 a 1,4 W/m2k

4

E1200

C5


until CR3

1,1 a 1,3 W/m2k

A+

A

B

C

D

E

F

G

A+

A

B

C

D

E

F

G

36

Wood Design 68TL (double glass) Wood Design 78TL (triple glass)

Wood Design 92 Klima (triple glass)

Wood Design 78 Klima (triple glass)


Woodpine, larch

78Klima


Uw=1,0Ug=0,7 FS=45%

Woodoak

78Klima


Uw=1,1Ug=0,7 FS=45%

Performance Features ( see Wood Design 68)Performance Features ( see Wood Design 78)Available in the version 78 Klima


Woodfir, pine, larch

92Klima


Uw=0,8Ug=0,6 FS=45%



4

E1200

C5


until CR2

0,8 W/m2k

4

E1200

C5


until CR2

1,0 a 1,1 W/m2k

A+

A

B

C

D

E

F

G

A+

A

B

C

D

E

F

G

37

Glazed Wall - Line Wood WGlass with fixed side lights, two sashes lift and slide in honey finished laminated oak

Wood WGlass

The Wood WGlass line is a De Carlo’s special project of lift and slide doors; the fixed glass frame is characterized to be integrated in the wall.

38

39

40

Detail of sliding sash with fixed sidelight and frame integrated in the wall structure

The declared values are carried out by tests and calculation in compliance with the European UNI EN 14351-1 law for the CE Conformity Marking of windows; the quality labeling “De Carlo Klima”is based on criteria of transparency, competence and impartiality granted by the producer in order to protect the final consumers. (*) Rw values of glass



68 Uf=1,433.1/15 argon/33.1 BE

Uw=1,3Ug=1,1 FS=56%

Woodoak

68 Uf=1,733.1/15 argon/33.1 BE

Uw=1,4Ug=1,1 FS=56%



Woodpine, larch

78Klima


Uw=0,96Ug=0,7 FS=45%

Woodoak

78Klima


Uw=1,0Ug=0,7 FS=45%

Lift ans Slide Wood WGlass 78 (triple glass)Lift ans Slide Wood WGlass 68 (double glass)



Wood WGlass

4

E1200

C5


until CR2

1,3 a 1,4 W/m2k

A+

A

B

C

D

E

F

G

4

E1200

C5


until CR2

0,96 a 1,0 W/m2k

A+

A

B

C

D

E

F

G

41

Wood Classic

The Classic line, suitable for both modern and classic architectural styles, is characterized by a round shaped internal profile (see the glass-holder in detail). Sash and frame of laminated wood (see Wood and Finishes).

Wood Classic glass door made of laminated oak, Brenner walnut stainedFront glass door with central opening sash and fixed sidelights

42

43

Glass door of laminated oak, Brenner walnut stained, central opening sash with fixed sidelights, arched transom windowSingle sash front glass window (with lock) and fixed arched transom windowSingle sash French Door (with lock)

44

Wood Classic 45

Single sash front French door with fixed arched transom windowSingle sash window with awning opening

46

Double sash front French door of laminated oak, Brenner walnut stained with handle and lock

Detail of French door made of brushed laminated oak Brenner walnut stained

Wood Classic 47

Wood Classic 68 (double glass)




68 Uf=1,433.1/15 argon/33.1 BE

Uw=1,3Ug=1,1 FS=56%

Woodoak

68 Uf=1,733.1/15 argon/33.1 BE

Uw=1,4Ug=1,1 FS=56%

The Wood Classic line, suitable for both modern and classic architectural styles, is characterized by a rounded shaped internal profile (see the glass-holder in detail). Sash and frame (window and French door) of laminated wood. Safety double-glazing Denergy, low-e with thermal cut spacers (upon request). Double gaskets on the frame for thermal and acoustic insulation. Dripper made of wood. Floor threshold less than 25 mm high (in compliance with the laws pursuing the removal of architectural barriers) with thermal cut (upon request) for French doors. Finishing cycle with hand sanding and acrylic resin-based finish in water emulsion, finish with UV filters, De Carlo’s 10-year warranty. Perimeter sealing of the glass. Opening mechanisms provided with multipoint hardware made of steel, with copper-zinc parts and self-adjusting bolts for the perfect adhesion between sash and frame, with Tricoat treatment for better resistance against corrosion and other atmosphere agents such as saline fogs and acids. Adjustable hinges in three dimensions in order to grant the perfect functionality even after possible adjustments occurring after installation.

Wood Classic

Wood Classic 78 (triple glass)



Woodpine, larch


Uw=1,1Ug=0,7 FS=45%

Woodoak


Uw=1,3Ug=0,7 FS=45%

4

E1200

C5


until CR2

1,3 a 1,4 W/m2k

A+

A

B

C

D

E

F

G

4

E1200

C5


until CR2

1,1 a 1,3 W/m2k

A+

A

B

C

D

E

F

G

48


SashProfile 77mm width (window and French door)Profile 107 mm width (front door with lock, sliding and pivot windows)

Profile 107 mm width (window and French door)Profile of the top and bottom transoms with customized width (for all versions)

Frame Section (window, French door) Profile 80 mm width (with join mill or flush) Supplementary mill (customized for restructuring)


Type of opening(window and French door)

Sash Tilt and Turn



Only for windows and French windowsAnti-intrusion base/Anti-intrusion Plus/ Anti-intrusion CR2 Anti-intrusion CR3 (only oak, only single sash)


With added mullion (symmetrical section)Without added mullion (asymmetric section)Without added mullion and with central handle (asymmetric section)

Threshold Aluminum (silver, dark brown, white) Thermal cut/ wood transom upon request

Hinges Multimatic (with Tricoat anticorrosion treatment, 10- year warranty) Concealed Multimatic (with Tricoat anticorrosion treatment, 10 year warranty)

Glass spacer Aluminum ( different colors) Thermal cut (grey, black, white)

Finish Smooth Aged (only pine, oak and larch)/brushed (only oak)


Sash profile with n° 2 - 77 mm transoms (h at 133 mm )Two 77mm transoms (133mm high)/three 77mm transoms (188 mm high) /two 107 mm transoms (193 mm high)/three 107 mm (278 mm high)/customized single transom (from 108 to 400 mm high)/for TL version single option: customized single transom (from 108 to 400mm high)

Mouldings Three sides mouldings type A 35x9 / 45x9 /55x9) - type B (55x12) Mouldings with width bigger than 55mm

Wood Classic 78 Klima (triple glass)

Wood Classic 92 Klima (triple glass)



Woodpine, larch

78Klima


Uw=1,0Ug=0,7 FS=45%

Woodoak

78Klima


Uw=1,1Ug=0,7 FS=45%



Woodfir, pine, larch

92Klima


Uw=0,8Ug=0,6 FS=45%



4

E1200

C5


until CR2

1,0 a 1,1 W/m2k

A+

A

B

C

D

E

F

G

4

E1200

C5


until CR2

0,8 W/m2k

A+

A

B

C

D

E

F

G

49

Wood Arte

The Arte line is characterized by the design of the internal and external profiles in the three versions: Arte, Arte OG and Arte OV, particularly suitable for the renovation of historic houses and period buildings and for classic environments. Sash and frame of laminated wood.

Arte line French door with simulated divided lights (Sdl) and bottom panels of painted laminated oak with customized

internal coating and upper moulding50

51

Window of white paint laminated oak with simulated divided lights

52

Double sash window of white paint laminated oak with fixed sidelights

Wood Arte53

French door of laminated oak with simulated divided lights and bottom panelsDetail of bicolor white paint at the external side and custom stain at the internal side

54

Detail of a section without added mullion, with central handle

Detail of Arte OG line with central symmetric section, flush mullions and transoms assembled without any visible junction

Detail of upper transom with fixed arched glass window and inner awning sash

Wood Arte55

Wood Arte 68 (double glass)


Woodpine, larch e mahogany

68 Uf=1,433.1/15 argon/33.1 BE

Uw=1,3Ug=1,1 FS=56%

Woodoak

68 Uf=1,733.1/15 argon/33.1 BE

Uw=1,4Ug=1,1 FS=56%

The Arte line is characterized by the design of the internal and external profiles (in the “Arte”, “Arte OG” and “Arte OV” version), particularly suitable for the restructuring of historic buildings, period houses and classic environments. Sash and frame (window and French door) of laminated wood. Safety double layer glass Denergy, low-e with spacers with thermal cut (upon request). Double gasket on the frame for thermal and acoustic insulation. Drippers of wood. Floor threshold less than 25 mm high (in compliance with the laws for removing the architectural barriers) with thermal cut (upon request) for French doors. Finishing cycle with hand sanding and acrylic resin-based finish in water emulsion, finish with UV filters, De Carlo’s 10-year warranty. Perimeter sealing of the glass. Opening mechanisms with multipoint hardware made of steel, with copper-zinc parts, with self-adjusting bolts for the perfect adhesion between sash and frame, with Tricoat treatment for the better resistance to corrosion and other atmospheric agents such as saline fogs and acids. Adjusting hinges in three dimensions in order to grant the proper functionality even after possible adjustments occurring after installation.

Wood Arte

Wood Arte 78 (triple glass)


Woodpine, larch


Uw=1,1Ug=0,7 FS=45%

Woodoak


Uw=1,3Ug=0,7 FS=45%

The declared values are carried out by tests and calculation in compliance with the European UNI EN 14351-1 law for the CE Conformity Marking of windows; the quality labeling “De Carlo Klima”is based on criteria of transparency, competence and impartiality granted by the producer in order to protect the final consumers. The declared values are calculations made by an analytic method on a window with a single sash 1230x1480mm of dimension. (*) Rw values of glass


4

E1200

C5


until CR2

1,3 a 1,4 W/m2k

4

E1200

C5


until CR2

1,1 a 1,3 W/m2k

A+

A

B

C

D

E

F

G

A+

A

B

C

D

E

F

G

56

Wood Arte OG 68 Wood Arte OV 68

Wood Arte 78 Klima (triple glass)

Line Art and Art OG OV also available 78 and 78Klima


Woodpine, larch

78Klima


Uw=1,0Ug=0,7 FS=45%

Woodoak

78Klima


Uw=1,1Ug=0,7 FS=45%



SashProfile 77mm width (window and French door)Profile 107 mm width (front door with lock, sliding and pivot widows)

Profile 107 mm width (window, French window)Profile of the upper and bottom transoms with customized width (for all versions)

Frame Section(window, French door)

Profile 80 mm width (with join mill or smooth) Supplementary mill (customized for restructuring)



Sash Tilt and Turn sash

Anti-intrusion(see security section)


Only for windows and French doorsAnti-intrusion base/Anti-intrusion Plus/ Anti-intrusion CR2Anti-intrusion CR3 (only oak, only single sash)


With added mullion (symmetrical section)Without added mullion (asymmetric section) /without added mullion with central handle (symmetrical section)

Threshold Aluminum (silver, dark brown, white) Thermal cut / wood transom upon request

Hinges Multimatic (with anticorrosion Tricoat treatment, 10 year warranty) Concealed Multimatic (with Tricoat anticorrosion treatment, 10 year warranty)

Glass spacer Aluminum (optional colors) Thermal cut (grey, black, white)

Finish Smooth Antiqued (only pine, oak and larch)/brushed (only oak)


Sash profile with two 77mm transoms (133mm high); for OG and OV profile, sash with single transom of wood (107 mm high)

Three 77mm transoms (188mm high)/single transom (107 mm ) /two 107 mm transoms (193 mm high)/three 107 mm (278 mm high)/customized single transom (from 108 to 400 mm high); for OG and OV single option: customized measure of single transom (from 108 to 400 mm high)

Mouldings Three sides mouldings type A 35x9 / 45x9 /55x9) - type B (55x12) Mouldings more than 55mm width


4

E1200

C5


until CR2

1,0 a 1,1 W/m2k

A+

A

B

C

D

E

F

G

57

Exter Alu Design

Exter Alu Design is characterized by sash and frame of laminated wood with an aluminum cladding; “Design” refers to the square shaped profiles, both internal and external, suitable for contemporary environments.

Exter design line, wood-aluminum, of laminated natural oak with silver oxidized aluminum cladding, with

45-degree gasket joint. Vertical pivot opening58

59

Vertical pivots of naturally finished laminated oak

60

Lift and slide door of naturally finished laminated oak Solution with adjustable louvers Roll Flap shutter system

Exter Alu Design 61

Detail of lift and slide, Exter Design line with double bottom transom and solution with adjustable louvers Roll Flap shutter system

62

Horizontal pivot of laminated oak, with 360-degree internal opening, detail of safety catcher

Vertical pivot, detail of opening system on bottom side

Exter Design French door with triple bottom transom and anti-intrusion metal protection

Detail of lift and slide door with double bottom transom of naturally finished laminated oak

Exter Alu Design 63

64

Lift and slide door of naturally finished laminated oak, internal side

Exter Alu Design 65

66

Exter line lift and slide door with silver oxidized aluminum cladding




68 Uf=1,433.1/15 argon/33.1 BE

Uw=1,3Ug=1,1 FS=56%

Woodoak

68 Uf=1,733.1/15 argon/33.1 BE

Uw=1,4Ug=1,1 FS=56%



Woodpine, larch

78Klima


Uw=0,96Ug=0,7 FS=45%

Woodoak

78Klima


Uw=1,0Ug=0,7 FS=45%

Lift and Slide Exter Alu Design 68+ (triple glass)Lift and Slide Exter Alu Design 68 (double glass)

4

E1200

C5


until CR2

1,3 a 1,4 W/m2k

A+

A

B

C

D

E

F

G

4

E1200

C5


until CR2

0,96 a 1,0 W/m2k

A+

A

B

C

D

E

F

G

Exter Alu Design



67

Exter Alu Design 68 (double glass)


Exterpine, larch, mahogany

68 Uf=1,433.1/15 argon/33.1 BE

Uw=1,3Ug=1,1 FS=56%

Exteroak

68 Uf=1,733.1/15 argon/33.1 BE

Uw=1,4Ug=1,1 FS=56%

Exter Alu Design 68+ (triple glass)



68+ Uf=1,433.1 BE/12 argon/4/12 argon/33.1 BE

Uw=1,1Ug=0,7 FS=45%

Exteroak


Uw=1,2Ug=0,7 FS=45%

Exter “Alu Design” is characterized by sash and frame of laminated wood with aluminum cladding. “Design” refers to the square shaped profiles, both internal and external, suitable for contemporary environments. Aluminum cladding (in the two versions, welded or joined) with opened joint for ventilation in order to avoid condensation inside the system. The aluminum finish made with epoxy powders in compliance with Qualocoat standards; paint cycle with hand sanding and acrylic resin-base finish in water emulsion, UV filter finish, De Carlo’s 10-year warranty. Double gasket on clipped frame for thermal and acoustic insulation (of thermoplastic elastomer) resistant to aging, weathering, fine dust emissions, UV rays. Co-extruded internal gasket with rigid layer, tear-proof cord and flexible gasket components in order to soften the impact of operations. The double layer glasses are installed with a perimeter glass-to-frame dowelling . Opening mechanisms with multipoint hardware made of steel with copper-zinc parts and mushroom bolts for the perfect cohesion between sash and frame, with Tricoat treatment for better resisting corrosion and other atmosphere agents such as saline fogs and acids. Three dimension hinges in order to grant the right functionality even after possible adjustments occurring after installation.

Exter Alu Design



4

E1200

C5


until CR2

1,3 a 1,4 W/m2k

A+

A

B

C

D

E

F

G

4

E1200

C5


until CR2

1,1 a 1,2 W/m2k

A+

A

B

C

D

E

F

G

68

Exter Alu Design 78 Klima (triple glass)

Exter Alu Design 68 Thermo Plus (triple glass)


Exterfir

78Klima


Uw=1,0Ug=0,7 FS=45%

Exteroak

78Klima


Uw=1,1Ug=0,7 FS=45%


Exterfir

68Passive


Uw=0,76Ug=0,7 FS=45%


SashProfile 81mm width (window and French door)Profile 109mm width (front door with lock, lift and slide and pivot widows)

Profile 109 mm width (window, French window)

Frame Section(window French door)

Profile 70 mm width (with join mill or smooth); aluminum cladding 86 mm width*aluminum cladding 53 mm width for arched shapes

Supplementary mill (customized for restructuring)Aluminum Clad Profile of 53 mm or 69 mm


Sash Tilt and turn sash



Anti-intrusion base/Anti-intrusion Plus/ Anti-intrusion CR2

Central closure section (double sash window and French door)


Threshold (French door) Aluminum (silver, dark brown, white) Thermal cut

Hinges Multimatic (with anticorrosion Tricoat treatment, 10-year warranty) Concealed Multimatic (with Tricoat anticorrosion treatment, 10- year warranty)




Sash profile with two transoms 81 mm high (137 mm high)A 109mm transom /two transoms 109 mm high (193 mm high ) /three transoms 109 mm high (274 mm high)/three transoms 81 mm high (194 mm high)

External aluminum cladding Assembled Welded (except oxidized and wood effect finishes)




4

E1200

C5


until CR2

1,0 a 1,1 W/m2k

A+

A

B

C

D

E

F

G

4

E1200

C5


until CR2

0,76 W/m2k

A+

A

B

C

D

E

F

G

69

Exter WGlass line, wood-aluminum, pure white painted laminated oak

Exter WGlass

Exter WGlass line is a special designed product for the lift and slide operation of a De Carlo alu-clad door. The side fixed light is totally integrated into the wall structure.

70

71

72

Exter Wglass

Exter WGlass line, wood-aluminum, pure white welded

73

74

Exter WGlass

4

E1200

C5


until CR2

1,0 a 1,1 W/m2k




Uw=1,0Ug=0,7 FS=45%

Exteroak


Uw=1,1Ug=0,7 FS=45%

Exter WGlass line, wood-aluminum, pure white weldedDetail of lift and slide door

The declared values are carried out by tests and calculation in compliance with the European UNI EN 14351-1 law for the CE Conformity Marking of windows; the quality labeling “De Carlo Klima”is based on criteria of transparency, competence and impartiality granted by the producer in order to protect the final consumers.(*) Rw values of glass



68 Uf=1,433.1/15 argon/33.1 BE

Uw=1,3Ug=1,1 FS=56%

Exteroak

68 Uf=1,733.1/15 argon/33.1 BE

Uw=1,4Ug=1,1 FS=56%

The declared values are carried out by tests and calculation in compliance with the European UNI EN 14351-1 law for the CE Conformity Marking of windows; the quality labeling “De Carlo Klima”is based on criteria of transparency, competence and impartiality granted by the producer in order to protect the final consumers.(*) Rw values of glass

Exter WGlass 68+ (triple glass)Exter Wglass 68 (double glass)

4

E1200

C5


until CR2

1,3 a 1,4 W/m2k

A+

A

B

C

D

E

F

G

A+

A

B

C

D

E

F

G



75

Exter Alu Classic

The Exter Alu Classic line is characterized by the shaped internal profile designed for classic or traditional environments.

Double sash French door with concealed hinges, fixed sidelights and arched top light

76

77

Double sash French door with fixed sidelights and arched top light, external cladding of bronze paint aluminum

78

double sash French door and arched top light, external cladding of dark bronze painted aluminum

Exter Alu Classic line, detail of the junction section of the sash to the sidelight


Double sash French door, external cladding of dark bronze painted aluminum. Detail of the tilt and turn operable sash

80

Double sash French door and arched top light, internal side(pure white painted pine)

Detail of bottom transom with two added transoms Detail of upper transom with tilt and turn operable sash


Exter Alu Classic 68 (double glass)



68 Uf=1,433.1/15 argon/33.1 BE

Uw=1,3Ug=1,1 FS=56%

Exteroak

68 Uf=1,733.1/15 argon/33.1 BE

Uw=1,4Ug=1,1 FS=56%

Exter Alu Classic line is characterized by laminated wood sash and frame with aluminum cladding; “Classic” refers to the traditional shape of internal profiles, designed for classic or traditional environments. Aluminum cladding (in the two versions, welded or joined) with opened joint for ventilation in order to avoid condensation inside the system. The aluminum finish made with epoxy powders in compliance with Qualocoat standards; finishing cycle with hand sanding and acrylic resin-base finish in water emulsion, UV filter finish, De Carlo’s 10-year warranty. Double gasket on clipped frame for thermal and acoustic insulation (of thermoplastic elastomer) resistant to aging, weathering, fine dust emissions, UV rays. Co-extruded internal gasket with rigid layer, tear-proof cord and flexible gasket components in order to soften the impact of operation. The double layer glasses are installed with a glass-to-frame dowelling on the frame. Opening mechanisms with multipoint hardware made of steel with copper-zinc parts and mushroom bolts for the perfect cohesion between sash and frame, with Tricoat treatment for better resistance to corrosion and other atmosphere agents such as saline fogs and acids. Three dimension hinges in order to grant the right functionality even after possible adjustments occurring after installation.

Exter Alu Classic

Exter Alu Classic 68+ (triple glass)




Uw=1,1Ug=0,7 FS=45%

Exteroak


Uw=1,2Ug=0,7 FS=45%

The declared values are carried out by tests and calculation in compliance with the European UNI EN 14351-1 law for the CE Conformity Marking of windows; the quality labeling “De Carlo Klima” is based on criteria of transparency, competence and impartiality granted by the producer in order to protect the final consumers. The declared values are calculations made by an analytic method on a window with a single sash 1230x1480mm of dimension.(*) Rw values of glass

The declared values are carried out by tests and calculation in compliance with the European UNI EN 14351-1 law for the CE Conformity Marking of windows; the quality labeling “De Carlo Klima” is based on criteria of transparency, competence and impartiality granted by the producer in order to protect the final consumers. The declared values are calculations made by an analytic method on a window with a single sash 1230x1480mm of dimension. (*) Rw values of glass

4

E1200

C5


until CR2

1,3 a 1,4 W/m2k

A+

A

B

C

D

E

F

G

4

E1200

C5


until CR2

1,1 a 1,2 W/m2k

A+

A

B

C

D

E

F

G

82



Profile 109 mm width (window, French door)


Profile 70 mm width (with join mill or smooth); aluminum cladding 86 mm width**aluminum cladding 53 mm width for arched shapes

Supplementary mill (customized for restructuring). Aluminum cladding from 53 to 69 mm







With added mullion (symmetrical section)Without added mullion (asymmetric section) /Without added mullion with central handle (symmetric section)






Sash profile with two transoms 81 mm high (137 mm high)Transom 109 mm high/two transoms 109 mm high (193 mm high)/three transoms 109 mm high (274 mm high)/three transoms 81 mm high (194 mm high)

External aluminum cladding Assembled Welded (except oxidized and wood effect finish)

Exter Alu Classic 78 Klima (triple glass)


Exterfir

78Klima


Uw=1,0Ug=0,7 FS=45%

Exteroak

78Klima


Uw=1,1Ug=0,7 FS=45%


The declared values are carried out by tests and calculation in compliance with the European UNI EN 14351-1 law for the CE Conformity Marking of windows; the quality labeling “De Carlo Klima” is based on criteria of transparency, competence and impartiality granted by the producer in order to protect the final consumers. The declared values are calculations made by an analytic method on a window with a single sash 1230x1480mm of dimension.(*) Rw values of glass

4

E1200

C5


until CR2

1,0 a 1,1 W/m2k

A+

A

B

C

D

E

F

G

83

Exter Alu Arte

Art OG and OV Lines available also 78 Klima and 68 Passive

Exter Arte 68 OG (double glass)



68 Uf=1,433.1/15 argon/33.1 BE

Uw=1,3Ug=1,1 FS=56%

Exteroak

68 Uf=1,733.1/15 argon/33.1 BE

Uw=1,4Ug=1,1 FS=56%

Exter Arte 68+ OG (triple glass)




Uw=1,1Ug=0,7 FS=45%

Exteroak


Uw=1,2Ug=0,7 FS=45%

The Exter Alu Arte line is characterized by laminated wood sash and frame with aluminum cladding; “Arte” refers to the traditional shape of internal profiles in OG and OV versions designed for classic and traditional environments. Aluminum cladding (in the two versions, welded or joined) with opened joint for ventilation in order to avoid condensation inside the system. The aluminum finish made with epoxy powders in compliance with Qualicoat standards; finishing cycle with hand sanding and acrylic resin-base finish in water emulsion, UV filter finish, De Carlo’s 10-year warranty. Double gasket on clipped frame for thermal and acoustic insulation (of thermoplastic elastomer) resistant to aging, weathering, fine dust emissions, UV rays. Co-extruded internal gasket with rigid layer, tear-proof corde and flexible gasket components in order to soften the impact of operations. The double layer glass is installed with a glass-to-frame dowelling on the perimeter. Opening mechanisms with multipoint hardware made of steel with copper-zinc parts and mushroom bolts for the perfect cohesion between sash and frame, with Tricoat treatment for better resisting corrosion and other atmosphere agents such as saline fogs and acids. Three dimension hinges in order to grant the right functionality even after possible adjustments occurring after installation.



4

E1200

C5


until CR2

1,3 a 1,4 W/m2k

4

E1200

C5


until CR2

1,1 a 1,2 W/m2k

A+

A

B

C

D

E

F

G

A+

A

B

C

D

E

F

G

84

Exter Arte 68 OV (double glass)



68 Uf=1,433.1/15 argon/33.1 BE

Uw=1,3Ug=1,1 FS=56%

Exteroak

68 Uf=1,733.1/15 argon/33.1 BE

Uw=1,4Ug=1,1 FS=56%

Exter Arte 68+ OV (triple glass)




Uw=1,1Ug=0,7 FS=45%

Exteroak


Uw=1,2Ug=0,7 FS=45%





Profile 70 mm width (with join mill or smooth); aluminum cladding 86 mm width** aluminum cladding 53 mm width for arched shapes

Supplementary mill (customized for restructuring).Aluminum cladding from 53 to 69 mm.







With added mullion (symmetrical section) Without added mullion with central handle (symmetric section)





Bottom transom of the French door sash Sash profile with single transom 109 mm high Single wood transom 193 mm high with two aluminum profiles

External aluminum cladding Assembled Welded (except oxidized and wood effect finish)

The updated technical sections of all typologies and systems are published on www.decarlolab.itThe above-mentioned characteristics can be updated and reported in the quotation document produced by the configuration software DCS 3.0.

The declared values are carried out by tests and calculation in compliance with the European UNI EN 14351-1 law for the CE Conformity Marking of windows; the quality labeling “De Carlo Klima”is based on criteria of transparency, competence and impartiality granted by the producer in order to protect the final consumers. The declared values are calculations made by an analytic method on a window with a single sash 1230x1480mm of dimension.(*) Rw values of glass


4

E1200

C5


until CR2

1,3 a 1,4 W/m2k

4

E1200

C5


until CR2

1,1 a 1,2 W/m2k

A+

A

B

C

D

E

F

G

A+

A

B

C

D

E

F

G

85

86

Exter Verbund is characterized by sash and frame made of wood with aluminum cladding on both sash and frame. In detail, an external sash with 6mm laminated glass, which can be opened by clips, give access to Venetian blinds with side rails in the same color. Paint cycle of wood with hand sanding and acrylic resin-base finish in water emulsion, UV filter finish, De Carlo’s 10-year warranty. Double gasket on clipped frame for thermal and acoustic insulation (of thermoplastic elastomer) resistant to aging, weathering, fine dust emissions, UV rays. Co-extruded internal gasket with rigid layer, tear-proof cord and flexible gasket components in order to soften the impact of closure. The double layer glasses are installed with a glass-to-frame dowelling on the perimeter. Opening mechanisms with multipoint hardware made of steel with copper-zinc parts and mushroom bolts for the perfect cohesion between sash and frame, with Tricoat treatment for better resistance to corrosion and other atmosphere agents such as saline fogs and acids. Three dimension hinges in order to grant the right functionality even after possible adjustments occurring after installation.

Exter Verbund

Exter Verbund 68 (double glass)



68 Uf=1,433.1/15 argon/33.1 BE

Uw=1,3Ug=1,1 FS=56%

Exteroak

68 Uf=1,733.1/15 argon/33.1 BE

Uw=1,4Ug=1,1 FS=56%


4

E1200

C5


until CR2

1,3 a 1,4 W/m2k

A+

A

B

C

D

E

F

G

87

Exter Bronze

The Exter Bronze line includes wood windows with bronze cladding. Exter Bronze is available in Classic, Arte and Design lines.

Exter Bronze lift and slide door, detail of the external cladding88

89

90

Exter Bronze Classic 68 lift and slide door of brushed laminated oak - wengè stained (internal side), with fixed glass light in the middle

Exter Bronze 91

92

Front door with bronze cladding

detail of bronze cladding

detail of sliding door, internal side

Exter Bronze tilt and turn window, external view Exter Bronze 93

Exter Bronze 68 (double glass)



68 Uf=1,433.1/15 argon/33.1 BE

Uw=1,3Ug=1,1 FS=56%

Exteroak

68 Uf=1,733.1/15 argon/33.1 BE

Uw=1,4Ug=1,1 FS=56%

Exter Bronze 68+ (triple glass)




Uw=1,1Ug=0,7 FS=45%

Exteroak


Uw=1,2Ug=0,7 FS=45%



Exter Bronze is characterized by laminated wood sash and frame with bronze cladding; available in Classic, Arte and Design versions. Bronze cladding with opened joint for ventilation in order to avoid condensation inside the system. The aluminum finish made with epoxy powders in compliance with Qualocoat standards; paint cycle with hand sanding and acrylic resin-base finish in water emulsion, UV filter finish, De Carlo’s 10-year warranty. Double gasket on clipped frame for thermal and acoustic insulation (of thermoplastic elastomer) resistant to aging, weathering, fine dust emissions, UV rays. Co-extruded internal gasket with rigid layer, tear-proof cord and flexible gasket components in order to soften the impact of closure. The double layer glasses are installed with a perimeter glass-to-frame dowelling. Opening mechanisms with multipoint hardware made of steel with copper-zinc parts and mushroom bolts for the perfect cohesion between sash and frame, with Tricoat treatment for better resisting corrosion and other atmosphere agents such as saline fogs and acids. Three dimension hinges in order to grant the right functionality even after possible adjustments occurring after installation.

Exter Bronze

4

E1200

C5


until CR2

1,3 a 1,4 W/m2k

A+

A

B

C

D

E

F

G

4

E1200

C5


until CR2

1,1 a 1,2 W/m2k

A+

A

B

C

D

E

F

G

94

Exter Bronze 78 Klima (triple glass)


Exterfir

78Klima


Uw=1,0Ug=0,7 FS=45%

Exteroak

78Klima


Uw=1,1Ug=0,7 FS=45%





Frame Section (window French door)

Profile 70 mm width (with join mill or smooth); aluminum cladding 86 mm width**aluminum cladding 53 mm width for arched shapes

Supplementary mill (customized for restructuring). Aluminum cladding from 53 to 69 mm







With added mullion (symmetrical section) Without added mullion with central handle (symmetric section)






Available also in the Exter Bronze Design and Art (OG/OV) lines


4

E1200

C5


until CR2

1,0 a 1,1 W/m2k

A+

A

B

C

D

E

F

G

95

Exter Glass

The Exter Glass line includes a full range of windows, French doors, sliding doors, with external glass cladding. As for windows and French doors, the Exter Glass Hidden version (with the frame integrated into the wall) belongs to the same line.

Exter Glass line, glazed lights with joined corner, black printed tempered glass

96

97

98

Sliding door with corner glazed light, made of whitened laminated oak

Exter Glass 99

Exter Glass, detail of internal corner joined units, whitened laminated oak

100

Exter Glass, external side with black printed glass, corner with lift and slide door on one side

Detail of external junction

Exter Glass 101

102

Exter Glass French door, “Hidden” version, with all glass effect window and frame perfectly integrated into the wall (from external side)

Exter Glass French door “Hidden” version (internal side)

Exter Glass 103

Exter Glass 68 (double glass)



68 Uf=1,433.1/15 argon/33.1 BE

Uw=1,3Ug=1,1 FS=56%

Exteroak

68 Uf=1,733.1/15 argon/33.1 BE

Uw=1,4Ug=1,1 FS=56%

The Exter Glass line is characterized by laminated wood sash and frame with glass cladding. Aluminum-clad on the frame for French doors and windows (welded or assembled aluminum upon customers’ request), AW 6060 alloy with open junction for ventilation in order to avoid condensation inside the system, finish made with epoxy powders in compliance with “Qualicoat” standards. Sashes with tempered glass cladding in the sliding version and windows/French doors available in the Glass version (anti-accident multi-layer glass Denergy, low-e for thermal insulation, double glass 8 tempered-15-33.1; triple glass, 8 tempered - 12-4-12-33.1 for Exter plus version). Sash with aluminum glass-holder and Denergy low-e glass in Hidden Glass version. Double gasket inserted into the frame for thermal and acoustic insulation (made of thermoplastic elastomer) resistant to the application fields from -40 to 120°C, and to aging caused by weathering, fine dust emissions and UV rays. Co-extruded internal foam gasket with rigid layer, tear-proof cord and flexible gasket components in order to soften the impact of closure. The double layer glasses are installed with a perimeter glass-to-frame dowelling. Opening mechanisms with multipoint hardware made of steel with copper-zinc parts and mushroom bolts for the perfect cohesion between sash and frame, with Tricoat treatment for better resisting corrosion and other atmosphere agents such as saline fogs and acids. Three dimension hinges in order to grant the right functionality even after possible adjustments occurring after installation.

Exter Glass

Exter Glass 68+ (triple glass)





Uw=1,1Ug=0,7 FS=45%

Exteroak


Uw=1,2Ug=0,7 FS=45%


4

E1200

C5


until CR2

1,3 a 1,4 W/m2k

4

E1200

C5


until CR2

1,1 a 1,2 W/m2k

A+

A

B

C

D

E

F

G

A+

A

B

C

D

E

F

G

104

Exter Glass 68 Hidden (double glass)



68 Uf=1,433.1/15 argon/33.1 BE

Uw=1,3Ug=1,1 FS=56%

Exteroak

68 Uf=1,733.1/15 argon/33.1 BE

Uw=1,4Ug=1,1 FS=56%

Exter Glass 68+ Hidden (triple glass)




Uw=1,1Ug=0,7 FS=45%

Exteroak


Uw=1,2Ug=0,7 FS=45%





SashProfile 81 mm width (window and French door)Profile 109 mm width (sliding door)



Profile 70 mm width (with join mill or smooth); aluminum cladding 86 mm width

Supplementary mill (customized for restructuring)Aluminum cladding from 53 to 69 mm





Anti-intrusion base / Anti-intrusion Plus







Bottom transom of the French door sash Sash profile with single transom 109 mm high -

Printed external glass Black White, dove-grey (RAL 7044), grey

4

E1200

C5


until CR2

1,3 a 1,4 W/m2k

4

E1200

C5


until CR2

1,1 a 1,2 W/m2k

A+

A

B

C

D

E

F

G

A+

A

B

C

D

E

F

G

105

dWall

DWall is the line of De Carlo curtain wall. They are made of a wood or aluminum structure in the versions:

External façades dWall Wood Glass

dWall Wood WooddWall Wood AludWall Wood BronzedWall Wood GlassdWall Alu

106

107

dWall Wood Bronze (with bronze clad)Detail of natural oak at interior side

108

dWall 109

dWall Wood Alu, white oak interior with front doors

dWall Wood BronzeExternal detail with front doors

110

111

112

dWall Alu

dWall 113

dWall Alu

114

dWall Wood Wood

dWall Wood Alu

dWall Wood Bronze

dWall Wood Glass

dWall Alu

The updated technical sections of all typologies and systems are published in www.decarlolab.it

horizontal section

horizontal section

horizontal section

horizontal section

horizontal section

115

Entry Doors De Carlo entry doors, designed with a single

sash or with symmetric and asymmetric sashes, present different esthetic solutions,

from the traditional to the contemporary style, up to customized design. All De Carlo entry

doors can reach the maximum degree of anti-intrusion safety according to the materials and

hardware used. Furthermore, entry doors can be provided with specific features for assuring

acoustic performances.

116

117

118

Detail of two sash entry door with horizontal staves, made of chestnut stained oak

One sash entry door made of chestnut stained oak, HP line

One sash entry door with two fixed sidelights, horizontal staves, HP line

One sash entry door made of oak with horizontal staves

119

Entry door made of honey stained oak, horizontal staves, detail of external view with staved fixed top-transom, HP line

Staved entry door of honey stained oak, detail of closing system

120

121

122

One sash entry door of honey stained oak, with horizontal stavesDetail of vertical staved entry door of Burma teak

Two sash staved entry door of Burma teak123

One sash entry door, “Artemide” model, Design line

124

Two asymmetric sashes entry door, of chestnut stained mahogany, “Jonio” model, Maxi line

Entry door of chestnut stained mahogany

One sash entry door, “Artemide” model, Design line

125

Entry door of white brushed oak, one sash, “Poseidone” model, Maxi line

126

Entry door of white paint oak, external view

“Poseidon” model, internal view

Detail of closing system

127

128

Oak entry door made according to the customer’s design129

130

The Shutters

131

132

Shutter with frame “wood” collection with adjustable louvers, opening with wall-overlapping hinge arm

Detail of adjustable hinges

133

134

135

136

Detail of adjustable hinges

“Aluminum” collection - shutter with frame with adjustable louvers, opening with wall-overlapping hinge arm

137

138

139

140

Sliding “mantovana” shutter. Wood collection with fixed rhomboidal louvers of painted laminated oak

Shutter

Vertical staved shutter

with frame

Horizontal staved

shutter with frame

Shutter with panel and

frame

Vertical staved

engraved shutter

Horizontal staved

engraved shutter

Fixed louvers

Adjustable louvers

Rhom-boidal louvers

12

Rhom-boidal louvers

20

Blind louvers

Shutter section

Shutter section

Shutter section

Shutter section

Shutter section

Line 54 54 54 54 54 54 54 54 40 Okumè 40 Okumè

Shutter with frame

Frameless shutter

Sliding shutters

ShuttersStaved

shutter with frame

Fixed louvers

Adjustable louvers

Line 54 54 54

Shutter with frame

Frameless shutter

Sliding shutters

141

Roll Flap

142

Roll Flap

143

Roll Flap

It is a new-generation adjustable shutter, with sun-shading louvers of extruded aluminum.The Roll flap system allows you to easily adjust the air and light in every room.

Roll flap-double shutter with connected louvers, in sun-shading position

144

145

Roll flap-double shutter with connected louvers, in sun-shading position

146

147

Collections

Wood Wood/Aluminum Wood/Bronze Wood/Glass Aluminum

Windows

French windows

Front door

Composed glass doors

Lift and slide doors

Pocket sliding doors

Tilt and slide doors

Folding doors

Horizontal pivots

Vertical pivots

Shutters

Curtain wall system

Windows Combinations

148

Notes: price categories represent a general indication for the customer. Standard handles are identified as category A, optional handles with price increase are included in categories B and C. Handles prices are highlighted in De Carlo’s quotations for each window.

Handles

Tokyo model (aluminum)Price category A

Colors: titanium (photo), gold, silver, bronze and white

Tokyo model (aluminum)Price category A

Colors: titanium, gold (photo), silver, bronze and white

Tokyo model (aluminum)With key or buttonPrice category B

Colors: see Tokyo aluminum

Tokyo model (brass)Price category B

Colors: polished brass (photo),satin chrome, bronze

Amsterdam model (aluminum)Price category B

Colors: titanium (photo)- also available with the key -

Amsterdam model (stainless steel)Price category B

Colors: chrome (photo)

Lama model (brass)Price category C

Colors: chrome (photo)

Golia model (brass)Price category C

Colors: polished brass (photo)

Roissy model (brass)Price category B

Colors: satin chrome (photo), polished brass

Roissy model (brass)Price category B

Colors: polished brass (photo), satin chrome

Lisboa model (brass)Price category B

Colors: polished brass, antique (photo), bronze

Lisboa model (brass)Price category B

Colors: polished brass, antique, bronze (photo)

149

Anti-intrusion Hardware

Self-adjusting bolt

Most of the break-in attempts is performed by occasional burglars acting mainly in the afternoon and evening, preferring doors and windows as entry points. The most frequently (70%), they use very simple and rudimentary tools (small screwdrivers or levers), which act on the locking points between sash and frame whose resistance is often won in few minutes. In order to thwart the burglary, prolonging the time it takes to break in, so discouraging burglars, it is often sufficient to insert some simple devices on the frame which slow the burglary

so as to avoid an easy entry inside the house. Due to this, on De Carlo’s windows it is possible the application of both simple devices such as tear-proof bolts and the preparation of real anti-intrusion systems, with degree of resistance in conformity with CR2 and CR3 certificates. Performance levels CR2 and CR3 correspond to a resistance of three minutes against the attacks with small levers (screwdrivers and wrenches), and 5 minutes against the attacks with a crowbar.

• It does not need adjustment, in presence of anti-intrusion rebates automatically adapts itself to the rebate profile (+/- 2 mm).

• Easy handling thanks to the hardening of the material and the special coating.

• Compatible with both flat counter plates and anti-intrusion counter plates.

• Certificate for the resistance to burglary.

All De Carlo’s windows are provided with standard hardware with self adjusting bolts.

Anti-intrusion closing rebates where the mushrooms bolts are attached resist the action of levers.

The use of handles with cylinder or with button prevent from any break-in attempt by forcing the handle mechanism.

Closing rebates

Handle with safe lock

Flat counter plate Anti-intrusion rebates Mushroom bolt with anti-intrusion rebate

Actionable by key lock Actionable by button

150

De Carlo’s proposal

BaseThe flat counterplates can be replaced by anti-intrusion rebates.Only available on tilt and turn versions

01

PlusAnti-intrusion points are uniformly distributed all along the sash perimeter, so as to reinforce the frame along bottom and top transoms. Only available on tilt and turn versions.

02

CR2Along with the Plus characteristics there is the addition of a handle with button or anti-rotation key, the use of hard wood only (laminated oak) with a 78x77 mm sash section, a class P4A anti-breaking glass (minimum 55.4) structurally glued to the sash. The French door is provided with a bottom transom so as to easily insert longer screws for the counter plates fixing. Only available on tilt and turn versions. Rectangular frames.

03

The frame and sash, made of oak, have a larger section than CR2 version and present some internal metal reinforcements. The anti-breaking glass of class P5A (minimum 44.6) has got a tear-proof glueing. Only available on tilt and turn version, single sash only with a 78x107 mm section, rectangular frames.

CR304

standard closing points*

anti-intrusion closing points*

glass bonding

metal reinforcements

*the number of closing points is proportional to the windows dimensions

151

Natu

ral (

TNAT

)

Hone

y (T

ML1

0)

Ches

tnut

(TC5

20)

Teak

(TTK

)

Bren

nero

Wal

nut (

TNB4

0)

Wen

gè (T

WEN

)

Cust

om S

tain

Whi

tene

d (T

SBC)

(1)(

3)

Pure

Whi

te P

aint

(RAL

9010

)

Pain

ted

(OTH

ER R

ALS)

Cust

om P

aint

Brus

hed

Antiq

ued

Type of WoodSurcharge for

Wood Surcharge for Finish

Surcharge for manufacturing

Laminated Pine (LP)(1) (3)

Laminated Mahogany (LM)

Laminated Larch (LL)(1) (3)

Laminated Oak (LR)(1) (3)

Laminated Douglas (LD)

Laminated Canaletto Walnut (LW)(2)

Laminated Brazilian Teak (LT)

Laminated Burma Teak (LB)

We use different types of woods such as: Pine, Mahogany, Oak, Larch, Douglas, Brazilian and Burma Teak, Walnut and Fir. On customer specific request, we can also provide other types of wood.

Wood finishes

NOTES:

A) Bicolor Finish: (at least one side painted) - Surcharge of 30%

B) Brushed: this is a procedure that is applied before the finishing stage. This is carried out by steel brushes which take out the softer parts of the wood in order to highlight the wood grain. This assures a soft effect and it is applicable only on oak.

C) Antiqued: this procedure is similar to the Brushed effect, with the difference of a deeper application of the steel brushes, in order to provide a stronger effect.

D) Surcharges: these are approximate indications and are calculated on the base price of the product.

standard (without surcharge respect to the base price)

optional (with surcharge)

(1) only for exter collection or as internal option for the bicolor finishes(2) only for exter collection(3) not applicable for the shutters

152

De Carlo does not grant the perfect correspondence of colors due to the variances of wood grains reproduced in the photos and declines any responsibilities deriving from the natural variations of wood.

Finishes to be chosen whenever the paint is the target for its covering and aesthetic effect. The colors are to be selected in the RAL color range (a set of RALS is readily available, while specific RALs will be evaluated on request).

RAL Paint on flat support (wood)

RAL 1013 op_1 Pearl White RAL 9010 op_1 Pure White

RAL 9016 op_1 Traffic White RAL 6005 op_1 Moss Green

RAL 6009 op_1 Fir Green RAL 7001 op_1 Silver Grey

RAL 7006 op_1 Beige Grey RAL 7012 op_1 Basalt Grey

RAL 7016 op_1 Charcoal Grey RAL 8011 op_1 Walnut Brown

RAL 8017 op_1 Chocolate Brown RAL 8019 op_1 Grey Brown

153

Wood finishes

Pine Natural Larch Natural

Pine Honey Larch Honey

Pine Chestnut Larch Chestnut

Pine Teak Larch Teak

Pine Brennero walnut Larch Brennero walnut

Pine Wengè Larch Wengè

154

Oak Natural Mahogany pure white painted

Oak Honey Mahogany chestnut

Oak Chestnut Mahogany Brennero walnut

Oak Teak Mahogany Wengè

Oak Brennero Walnut

Oak Wengè


155

Oak brushed natural stained Oak antiqued natural stained

Oak brushed Moroccan beige Oak antiqued pure white paint

Oak brushed light ivory paint Oak antiqued whitened

Oak brushed whitened Oak antiqued teak stained

Oak brushed teak stained Oak Brennero walnut

Oak brushed wengè stained Oak antiqued wengè stained

Wood finishes

156

Pine antiqued natural stained Larch antiqued natural stained

Pine antiqued pure white painted Larch antiqued pure white painted

Pine antiqued whitened Larch antiqued whitened

Pine antiqued teak stained Larch antiqued teak stained

Pine antiqued wengè stained larch antiqued wengè stained

Pine antiqued silver grey painted Larch antiqued silver grey painted


157

RAL Color SampleALUMINUM PROCESSING

Assembled Welded

DECORATED WOOD

DLE300 Walnut

DLE700 Douglas

DLE900 Antique white (dust)

DLE1300 Light Cherry

DLE1400 Dark Walnut

DLE1500 Medium Walnut

BRONZE PAINTED

LBR100 Light Bronze Painted

LBR200 Medium Bronze Painted

LBR300 Dark Bronze Painted

OXIDIZED

OSS100 Oxidized Silver 45°

OSS200 Oxidized Light Bronze 45°

OSS400 Oxidized Brown 45°

OSS500 Oxidized Dark Brown 45°

SABLÉ

SAB400 Blue Sablè

158

standard (without surcharge in relation to the basic price)

optional (with surcharge)

RAL Color Sample

ALUMINUM PROCESSING

Assembled Welded

RAL GRINZ

RAL1013 Pearl White

RAL8017 Chocolate Brown

RAL9006 White Aluminum

RAL9010 Pure White

RAL6005 Moss Green

BRUNELLESCHI

BRN200 Brunelleschi Grey

BRN500 Brunelleschi Brown

BRN100 Brunelleschi White

BRN300 Brunelleschi Green

CORIUM

COR300 Corium Coffeè

COR400 Corium Sage Green

COR700 Corium Corten

159

The product warranty goes beyond the standard two-year warranty required by law because De Carlo’s wood and aluminum windows offer considerable benefits in terms of reliability and durability. The warranty validation must be carried out simply by recording the customer’s name and the order code directly on the website www.decarlo.it within 60 days from delivery (even with the Dealer or the Agent’s help).De Carlo, on delivery, shall give the guide for a proper use and care of windows, containing lots of practical advices. De Carlo’s Guide for Windows and the text of the guarantee are available in “file” format on www.decarlo.it site.

Warranty

160

Documents

Decarlo eng