[Dec., 2016] ZULKIFLI ABDUL MAJID · [Zulkifli Abdul Majid] CURRICULUM VITAE 3 4. Committee Member, Seminar Keselamatan Sistem Gas bagi Sektor Pendidikan, Suruhanjaya Tenaga, Malaysia,

[Dec., 2016] ZULKIFLI ABDUL MAJID

______________________________________________________________________________

[Zulkifli Abdul Majid] CURRICULUM VITAE 1

CURRICULUM VITAE

1. PERSONAL PARTICULARS Name : ZULKIFLI BIN ABDUL MAJID I/C No. : 641002-08-5387 (7462523) Nationality : Malaysian Date of Birth : 2nd October 1964 Place of Birth : Kota Bharu, Gopeng, Perak Marital Status : Married Spoken Language : Malay, English Home Address : No. 26, Jalan Pulai 41, Taman Pulai Utama,

81300 Skudai, Johor. Office Address : Department of Renewable Energy Engineering

Faculty of Petroelum and Renewable Energy Engineering, Universiti Teknologi Malaysia, 81310 UTM Skudai, Johor Darul Takzim

Telephone No. : 07-5536369/5536362 (Office) 07-5202028 (home); HP: 019-7407602

Fax No. : 07-5545667, 07-558163

e-mail address : [email protected]

2. ACADEMIC QUALIFICATIONS

1. 1991 : M. Sc. in Gas Engineering and Management, The University of Salford, United Kingdom, Dissertation entitled “Data Acquisition System for Frequency Meters”

2. 1990 : Postgraduate Diploma in Management and

Economics of Natural Gas from the College of Petroleum Studies, Oxford, United Kingdom

mailto:[email protected]


______________________________________________________________________________


3. 1988 : B. Sc - Geology (Hons - 2nd Class Upper Division) Universiti Malaya, Kuala Lumpur, Malaysia. Thesis Submitted entitled “The Geology of South Kangar Area”

4. 2007-2017 : Part-time Phd candidate, project title: Erosion of underground

NPS8 carbon Steel Natural Gas Pipeline.

3. PROFESSIONAL QUALIFICATION

Competence Gas Engineering Supervisor, JBEG (PKG 128), Energy Commission of Malaysia, 2001

4. PROFESSIONAL AFFILIATION

Honorary Corporate Member of Malaysian Gas Association (MGA) Member of Geological Society of Malaysia

5. CURRENT POSITION

Deputy Director (Training and Information), Gas Technology Centre GASTEG), Universiti Teknologi Malaysia (1st Sep. 2009 - to date)

Senior Lecturer at Gas Engineering Department, Faculty of Chemical & Natural Resources Engineering, Universiti Teknologi Malaysia (Date of appointment: 30th July 2004)

Verification Manager, Calibration Services Laboratory, GASTEG, Faculty of Petroleum and Renewable Energy Engineering (FPREE) –1st Sep. 2009 to date

6. ADMINIMISTRATION AND ADDITIONAL RESPONSIBILITIES 6.1 Administration Post

1. Deputy Director (Training and Information), Gas Technology Centre (GASTEG), Universiti Teknologi Malaysia (1st Sep. 2009 – to date)

2. Head of Gas Engineering Panel (1994-1998) 3. Head of Gas System Laboratory (1/10/2000 - 30/9/2003, 01/01/2007 –

1/12/2009) 4. Head of Gas Testing Laboratory (8/7/1991 - 7/7/1995)

6.2 Additional Responsibilities at National Level

1. Written Examination Panel for Competence test in Gas Fitter Class I, II and II, Energy Commission, Malaysia, (2000 – present)

2. Committee Member for the International Conference MGA 3. Committee Member, Seminar on Gas Safety Awareness, Energy

Commission, Malaysia (1999 – 2004)


______________________________________________________________________________


4. Committee Member, Seminar Keselamatan Sistem Gas bagi Sektor

Pendidikan, Suruhanjaya Tenaga, Malaysia, (2005 – present) 5. EPU – Panel consultant on NGV Application and National Impact Study 6. Working Committee, Guidelines on Domestic Gas Piping System, (1-4-

2002) – present 7. Working Committee, Guidelines on Domestic Gas Piping System, (2000

- 2001) 8. Technical Committee for the ECU and EMS Development for the NGV

System/UTM/CCPD/PRSS/PRF Fund/2002-2005 9. Technical Committee, COSS Development for Gas Fitter (Level, I, II and

III), CIDB, (2005 – present)

6.3 Additional Responsibilities at University

1. Expert Panel - Gas Engineering, Encyclopedia of Science & Technology, UTM-DBP Publisher (5/9/1994 - 31/10/2001)

2. Member of Editor Committee for Encyclopedia of Science and Technology, UTM-DBP Publisher (31/10/1996 - 31/10/2001)

3. Proof reader - Encyclopedia of Science & Technology (5/9/1994 - 31/10/2001)

4. Member of Curriculum and Syllabus Committee for MARA/UTM Diploma Program (25/3/1995)

5. Expert Panel on Patent Evaluation, RMC (11/5/2001) 6. Member of Index Committee for Encyclopedia of Science and

Technology, UTM-DBP Publisher (1/11/2002 - present) 7. Expert Panel on LPG Reticulation for UTM Skudai Campus (1/4/2003-

present) 8. IDB Tender Committee, R & D – Energy Sector 9. IDB Tender Committee, T & T – Energy Sector 10. Advisor of the Gas Engineering Student’s Society (GESS), 2004-present. 11. Course Coordinator, A Course for Responsible Person – GASTEG, (2004

– present) 12. Course Coordinator, A Course for Gas Fitter – GASTEG, (2004 - present) 13. Course Coordinator, A Course for Gas Contractor – GASTEG, (2004-

present) 14. Course Coordinator, A Management Course for Gas Contractor,

GASTEG, (2004 - present)

6.4 Additional Responsibilities at Faculty /Department

1. Deputy Director (Training and Information), Gas Technology Centre GASTEG), Universiti Teknologi Malaysia (1st July 2001 - to date)

2. Head of Gas System Laboratory (1/10/2000 - 30/9/2003, 01/01/2007 – 1/12/2009)

3. Student Academic Advisor (2 SKG) (1/06/2003 - Present) 4. Coordinator for Research Exhibition for Pejabat Pendidikan Daerah

Kulai (9/4/2002 - 11/4/2002) 5. Committee Member of a New Building for Student Development

Centre (13/3/2002 – 31/12/2002) 6. Head of Gas Transmission and Distribution Panel

Gas Engineering Department (1/8/1997 - 31/7/1999 & 15/8/1998 - 14/8/2000)


______________________________________________________________________________


7. Member of Faculty Academic Board (28/8/1998 –

27/10/2000) 8. Head of Gas Engineering Panel (1/8/1995 - 31/7/1997 &

1/7/1997 - 30/6/1999) 9. Coordinator for Gas Contractor Course (1/11/1996 - 31/10/1998) 10. Coordinator for Gas Fitter Course (January 1998 - Present) 11. Member of Students Practical Training and Industrial Relation

Committee (1/7/1994 - 30/6/1996, & 1/7/1997 - 30/6/1999) 12. Member of Curriculum and Syllabus Committee (1/7/1997 -

30/6/1999) 13. Secretary of Petroleum Training Committee (1993 - 1996)

14. Secretary of Jawatankuasa Penerapan Nilai Islam (JAPNI) (1993 - 1995).

15. Coordinator for Faculty Family Day (16/5/1995) 16. Head of Gas Testing Laboratory (8/7/1991 - 7/7/1995) 17. Member of Laboratory Design Committee for Skudai Campus (4/7/

1994) 18. Student Academic Advisor (SKG) (session 1991/1992 – to date)

19. Student Academic Advisor (5 SKP) session 1989/1990)

7. PREVIOUS EXPERIENCES

7.1 Industry

1. PETRONAS Internship Program, Trainee Geologist at Production

Department (1/8/1988 - 15/11/1988) 2. Factory Training of PARR Testing Machine at PARR Instrument

Company, Moline Illinois, USA (February 1993) 3. Industrial Technical Training at Tokyo Gas Co. Ltd., Japan

(16/5/1994 - 3/6/1994) 4. Factory Training of Seta Gas Testing Equipment, Stand Hope Seta,

United Kingdom (June 1995) 5. Industrial Technical Training on Gas Production at Duyong Gas

Production Platforms, PETRONAS Carigali Sdn. Bhd. (September 1996) 7.2 Universiti Teknologi Malaysia 1. Assistant Lecturer, Petroleum Engineering Department,

Faculty of Chemical & Natural Resources Engineering, (17/11/1988 - 20/06/1991)

2. Lecturer, Polymer and Gas Engineering Department, Faculty of Chemical & Natural Resources Engineering, (20/06/1991 - 14/08/1998)

3. Lecturer, Gas Engineering Department, Faculty of Chemical & Natural Resources Engineering, (15/8/1998 – 29/07/2004) 4. Senior Lecturer, Gas Engineering Department, Faculty of Chemical & Natural Resources Engineering, (30/07/2004 – present)


______________________________________________________________________________


8. TEACHING / SUPERVISION 8.1 Teaching (Full Time Student)

B. Eng. in Chemical/Gas Engineering

1. Fuel Technology and Energy (5 semesters) 2. Gas Utilisation (2 semesters) 3. Gas Storage and Reticulation Design (1semester) 4. Gas Management and Economic (6 semesters) 5. LPG Technology (2 semesters) 6. Engineering Economy and Project Management (2 semesters) 7. Fuel and Combustion Technology (4 semesters) 8. Fuel Testing Laboratory (3 semesters) 9. Gas System Laboratory (5 semesters) 10. Fuel Testing and Combustion Laboratory (4 semesters) 11. Technical Drawing (8 semesters) 12. Basic Engineering Laboratory (4 semesters) 13. Introduction to Gas Engineering (3 semesters) 14. Engineering Economy (5 semesters) 15. Combustion Engineering and Gas Utiisation (7 Semesters) 16. Gas Combustion and Utilisation Laboratory (5 Semesters)

Diploma in Petroleum Engineering

1. Geoscience 2 (1 semester) 2. Geoscience 3 (1 semester) 3. Technical Drawing (3 semesters) 4. Basic Engineering Laboratory (Fluid Mechanic) (2 semesters)

B. Eng. in Petroleum Engineering 1. Petroleum Geology (5 semesters)

8.2 Supervision Master of Engineering (Gas Engineering) Thesis Project

1. Development of Natural Gas Fuel System for Motorcycle with Exhaust Emission and Performance Comparison to Gasoline (Martin Philip King Ik Piau - 1998/2000) – graduated 2001

2. Convergence Characteristic of Steady State Gas Network System Using Numerical Loop-Node Method (Yang Kong Woh - 1999/2001) – graduated 2002

3. Development of Domestic and Commercial Gas Meter Calibration for Malaysian Application (Liaw Kim Kiat - 2000/2002) – graduated 2003

4. Effect of Multi-Jetting and Jetting Angularity to NPS8 Natural Gas Pipeline Integrity (Tan Fu Long – 2012/2015) – graduated 2015


______________________________________________________________________________


5. Performance and emissions characteristic of diesel dual fuel engine fueled with biodiesel-diesel fuel blends in a compression ignition engine (Abdul Hakim Shihnan – 2013/2015) – graduated 2015

Bachelor of Engineering (Chemical-Gas) Thesis Project

1. Pipeline Design using Speadsheet (1992/1993) 2. Fuel Gas Interchangeability (1992/1993) 3. Orifice Sizing for Safety Valve using Computer Programming (1993/1994)

4. Costing for LPG Reticulation System Using Computer Programming (1993/1994)

5. Development and Design for Diaphragm Gas Meter (1993/1994) 6. Theoretical/Conceptual Design of Gear and Index for Diaphragm Gas

Meter (1993/1994) 7. Study on Safety System for Diaphragm Gas Meter (1993/1994) 8. Effect of Soil Wetness on Gas Leakage Rate (1994/1995) 9. Emergency Response Model for Gas Utility Company (1994/1995) 10. Procedure for Pipeline Welding on Life Gas Pipe Line (1994/1995) 11. Proposal on Design of Gas Metering Station in Restricted Area

(1994/1995) 12. A Study on the Possibility of using Local Coal for Power Generation

(1995/1996) 13. Software Development on Gas Emergency Response (1995/1996) 14. Procedure for Hydrostatic Test and Commissioning of Gas Pipeline

(1995/1996) 15. Interference of High Voltage Electrical Transmission Cable on Cathodic

Protection System (1995/1996) 16. Utilisation of Fibre Optic for Gas Transmission System (1996/1997) 17. Combustion Interchangeability of Natural Gas and Liquefied Petroleum

Gas (Domestic Uses) (1997/1998) 18. Natural Gas Storage System for Domestic Uses (1997/1998) 19. Multimedia for Gas Storage System (1997/1998) 20. Regulator Design Using Computer Programming (1997/1998) 21. Method for Turbine Gas Meter Calibration at Segamat Proving

Facilities (1997/1998) 22. Utilisation of Natural Gas For Cooling and Air Conditioning

(1997/1998) 23. Procedure for Hot Tapping Operation of Gas Pipeline (1997/1998) 24. Risk Assessment of Gas Transmission Line (PGU III) (1997/1998) 25. Preparation of Quality Manual for Gas Calibration Units (1997/1998) 26. Gas Meter Calibration Using Bell Provers (1997/1998) 27. Study on Gas Explosion (1998/1999) 28. Utilisation of Natural Gas for Co-Generation System (1998/1999) 29. Determination of Vapour Pressure Using Computer Programming

(1998/1999) 30. Preparation of Procedure Quality for Gas Calibration Units

(1998/1999) 31. Conceptual Design of Slow Filling System (Domestic) for Natural Gas

Vehicles (1998/1999) 32. Conceptual Design of Testing Rig for LPG Gas Piping (1998/1999)


______________________________________________________________________________


33. Impact Study on Polyethylene Pipe (PE) (1998/1999) 34. Conceptual Design of Testing Rig for Safety Valves (1998/1999) 35. Utilisation of Composite Materials for Gas Storage (Motorcycle)

(1998/1999) 36. Impact, Fire Resistance and Pressure Standards for

Compressed Natural Gas Storage (1999/2000) 37. Effect of Static and Dynamic Load on Pipe Strength (1999/2000) 38. Reduction of NOx Emission from Combustion of Natural Gas Using

Catalysts (1999/2000) 39. Study on Treatment, Corrosion and Crack of Composite Storage

(1999/2000) 40. Study on Yield Strength of Polyethylene Pipe (PE) (1999/2000) 41. Study on Monofuel Vehicles (1999/2000) 42. Study on Maximum Acceleration and Speed of Natural Gas

Motorcycles (1999/2000) 43. Determination of Hydrogen Sulfide in Malaysian Liquefied Petroleum

Gas (2000/2001) 44. Design of Dynamometer Testing Room for Natural Gas Motorcycle

(2000/2001) 45. NOx Emission from Bi-Fuel Motorcycle (2000/2001) 46. Fuel Cell- Future Energy Source (2000/2001) 47. Computer Software for Internal Piping (2000/2001). 48. Utilisation of Copper Pipe for 200 Kpa Pressure Gas Distribution

System (2000/2001) 49. Natural Gas as a Fuel for the Portable Generator (2000/2001) 50. Combustion Effect on Lubrication oil for Natural Gas Motorcycle

(2001/2002) 51. Comparison on Standards for Copper Piping (2001/2002) 52. A Study on the Strength of Copper Pipe (2001/2002) 53. A Comparison on Engine Power Output derived from 1st and 2nd

Generation of Gas Mixer (2001/2002) 54. Computational Fluid Dynamic Study on Natural Gas Injector

(2001/2002) 55. A Study on Natural Gas Injector Control System (2001/2002) 56. Case Study on the Utilisation of NGV Taxis in Lembah Klang Area

(2001/2002) 57. A Comparison on Engine Power Output from LPG and NG Fuelled

Motorcycle (2001/2002) 58. A Weakness Analysis for the Application of MS930 in Malaysia

(2001/2002) 59. A Study on Installation of Dynamometer for the Engine testing Room

(2001/2002) 60. Performance of 555 Timer for the Gas Injection System (2002/2003) 61. Conceptual Design of the Natural Gas Injector (2002/2003) 62. The Study on Suitable Location for Natural Gas Fuel System in the

Motorcycle (2002/2003) 63. The Study on Location and Angle of the Injector for Throttle Body

Injection System (2002/2003) 64. Simulation Study on the Effect of Injection Pressure on the Mixing

Pattern (2002/2003) 65. Installation Procedures for Bulk and Manifold Storage System

(2003/2004)


______________________________________________________________________________


66. Conceptual Design of the Engine Control System for Natural Gas

Motorcycle (2003/2004) 67. A Case Study on Testing, Purging and Commissioning According to MS

930 (2003/2004) 68. Software Development for LPG Storage Sizing (2003/2004) 69. Case Study on the Effective ness of Gas Supply Act 1993 and Gas

Supply Regulation 1997 (2003/2004) 70. A Study on Oxygen Emission from Natural Gas Motorcycle

(2003/2004) 71. A Literature Research on Emergency Response for Gas Pipeline System

in Malaysia (2004/2005) 72. Engine Performance Study on Gasoline and Natural gas Using

Dynamometer (2004/2005) 73. A Study on Natural Gas Fuelling System for Small Engine (2004/2005) 74. A Study on Safety Aspect of Natural Gas Vehicles Testing Room 75. Gas Network System with Multiple Supply Sources (2004/2005) 76. A Case Study on Safety And Testing Aspects of Gas Burning Appliances

(2004/2005) 77. Simulation Program to Determine Natural gas Pipe Diameter Based on

Clifford, NFPA and Pole’s Methods (2005/2006) 78. Test Rig Design for Back Check Valve (2005/2006) 79. Experimental Study on Air-Fuel Mixing System for NGV Motorcycle

System (2005/2006) 80. Development of Natural Gas Fuel System for Karisma MODENAS

Scooter (2005/2006) 81. Experimental Study on Water jet Impact of Gas Pipe (Nozzle and Force

Determination(2006/2007) 82. Comparison Study on Engine Oil and Spark Plug Quality for Modenas

Karisma Scooter (2006/2007) 83. A Study on Exhaust Gas Emission for Modenas Karisma Scooter

(2006/2007) 84. Development of Data Management System for energy Commission

[2006/2007] 85. A Study on factors that Contribute to Rapid Corrosion of Carbon Steel

Pipe (2006/2007) 86. Abrasion Effect on Gas Pipeline for Water Jet System (2006/2007) 87. Water Jeting Impact on Natural Gas Pipe at Normal Inpingement (force

Determination) [2006/2007] 88. Effect of Impingement Angle on Erosion of Carbon Steel

pipe[2007/2008] 89. Effect of Impingement angle and Distance of Jetting Point on Erosion

of Carbon Steel Pipe[2007/2008] 90. Erosion of Carbon Steel Pipe cause by 10 bar Water Jetting in Sand

Slurry environment (2007/2008) 91. Erosion of Carbon Steel Pipe cause by 5 bar Water Jetting in Sand

Slurry environment (2007/2008) 92. A study of Water-Sand Slury Jetting on Natural Gas Pipe Through

Contouring the Impacted Surface (2007/2008) 93. A Study of Water-Sand Jetting on natural gas pipe through Surface

Countouring (2007/2008) 94. Effect of Downward Water jetting on Erosion of Carbon Steel pipe

I(2008/2009)


______________________________________________________________________________


95. Effect of Downward Water Jetting on Erosion of Carbon Steel pipe II

(2008/2009) 96. Effect of Vertical Water Jetting on Erosion of Carbon Steel

pipe(2008/2009) 97. Erosion Effect of Water Jet in Sand Water Environment on NPS8

Carbon Steel Pipe(2008/2009) 98. Effect of 10 Barg Water Jetting Angle on Erosion of NPS8 Steel Pipe

(2008/2009) 99. Erosion Effect of Vertical Water Jet in Water-Sand Slurry on NPS8

Carbon Steel Pipe (2008/2009) 100. Material Study of Erosion on NPS8 Carbon Steel Pipe (2009/2010) 101. Erosion Efefct of Vertical Water Jet in Sand Water Environment on

NPS8 Carbon Steel Pipe (2009/2010) 102. Development of Alternative Backfilling Material Material for Trenching

Natural Gas Pipeline (2009/2010) 103. The Effect of Sand Particle Size on Erosion of NPS8 Carbon Steel Pipe

(2009/2010) 104. Development of a Protective Barier for Natural Gas Piping System

(2009/2010) 105. Caomputational Fluid Dynamic (CFD) Simulation of VEertical Water

Jetting on Natural Gas Pipe (2010/2011) 106. Experimental Study on Erosion of NPS8 Carbon Steel Pipe Due to High

Pressure Vertical Jetting (Safety Distance (2010/2011) 107. Erosion Effect on NPS8 Carbon Steel Pipe Due to Different Orifice

Opening in Water-Sand Slury System (2010/2011) 108. Study on Natural Gas Pipe Failure Due to High Pressure Vertical Water

Jetting (2010/2011) 109. Modelling of Natural Gas Release from High Pressure Pipeline

(2010/2011) 110. Erosion of NPS8 Carbon Steel Pipe by Triple Vertical Upwards Jetting

(2011/2012) 111. Characterisation of Local Backfilling Material and its Effect Towards

Erosion of NPS8 carbon Steel Pipe (2011/2012) 112. Erosion of Vertical Upwards Jetting Angles on Erosion of NPS8 carbon

Steel Pipe (2011/2012) 113. Development of Wear Index for Erosion Water Jet (2011/2012) 114. Development of Predictive Erosion Model for Erosive Water Jet

(2011/2012) 115. Engine Performance and Emission Charateristics of CI Fuelled by

Biodiesel-DDF (2012/2013) 116. Production of Biodiesel from Waste Cooking Oil (2012/2013) 117. The introduction of LNG to NGDS in Malaysia: its Effect s towards

Energy Sustanability (2012/2013) 118. Effect of Diesel-Biodiesel-Alchohol Blends on Engine Performance and

Emission of DDF engine system: (2013/2014) 119. Performnace and Exhaust Emission of DDF Fuelled with Diesel-

Biodiesel-Natural Gas (2013/2014) 120. Effect of biofuel blends towards diesel engine with acetone and

isopropyl alcohol as additives (2014/2015) 121. Effect of biofuel and bioethanol on exgaust emission of DDF engine

(2014/2015) 122. The effect of altitude on concentration of odorant in natural gas

distribution pipeline (2015/2016)


______________________________________________________________________________


123. The effect of flowrate of natural gas to the odor fading in pipeline

system (2015/2016) 124. The effect of air fuel (B10 palm oil and waste cooking oil) ratio on

engine performance and exhaust emission DDF engine (2016/2017). 125. The effect of air fuel (B15 palm oil and waste cooking oil) ratio on

engine performance and exhaust emission DDF engine (2016/2017).

Bachelor of Engineering (Chemical) Plant Design Project

1. Ammonia Production Plant (100,000 MT/Annum Production Capacity)

(1996/1997) 2. MTBE Production Plant 100,000 MT/Annum Production Capacity)

(1997/1998) 3. Polypropylene Production Plant (100,000 MT/Annum Production

Capacity) (1997/1998) 4. Ethylene Production Plant (1,000,000 MT/Annum Production Capacity)

(1997/1998) 5. A Proposal to Produce 50,000 MT per Annum of Ecetaldehyde from

Ethylene (1998/1999) 6. A proposal of 50,000 MT per Annum of Propylene Oxide Production

Plant (1999/2000) 7. A Proposal of 50,000 MT per Annum of Benzoic Acid Production Plant

(1999/2000)

Student Industrial Training

1. Masmirin Corporation Sdn. Bhd. (1993) 2. Rirametal Sdn. Bhd. (1994) 3. Pakaruji Sdn. Bhd. (1995)

4. Gas Malaysia Sdn. Bhd. (1995) 5. GLM Inspection Sdn. Bhd. (1995)

6. Sarawak Shell Sdn. Bhd. (1996) 7. PETRONAS Methanol (Labuan) Sdn. Bhd. (1996) 8. Malaysia Oxygen Sdn. Bhd. (1996) 9. PETRONAS Gas Bhd. (1996) 10. Nestle Malaysia Sdn. Bhd. (1996) 11. Kejuruteraan Gosan (M) Sdn. Bhd. (1997) 12. Kejuruteraan Jaya Gas Sdn. Bhd. (1997) 13. Astaraya Sdn. Bhd. (1997) 14. HT Telesis Sdn. Bhd. (1997) 15. Panglima Aces Sdn. Bhd. (1998) 16. Lubecraft Sdn. Bhd. (1998) 17. Jabatan Bekalan Elektrik dan Gas (1998) 18. Tractor Malaysia Sdn. Bhd. (NGV Section) (1998) 19. Maju Gas Sdn. Bhd. (1998) 20. ASE Electronics (M) Sdn Bhd 21. Jabatan Perikanan Malaysia 22. ACME ferrite Products Sdn Bhd 23. Confort Rubber Glove Industry Sdn Bhd 24. Faber Medi-Serve Sdn Bhd 25. Lembaga Air Perak 26. OSI manufacturing Sdn Bjd


______________________________________________________________________________


27. RUSCH Sdn Bhd 28. Lumut Power Station 29. Jabatan Alam Sekitar 30. Kian Guan Enterprise 31. South East Asia Paper Products Sdn Bhd 32. Sabutek (M) Sdn Bhd 33. Lembaga Koko Malaysia 34. Maintek Enterprise

9. RESEARCH INVOLVEMENT 9.1 International Level

1. “Determination of Hydrogen Sulfide Content in Malaysian Natural Gas and Liquefied Petroleum Gas”, research funded by Copper Development Centre, South East Asia. May - Dec. 2000. (Gas Engineering - Gas Distribution)

9.2 National Level Head for the following projects

1. “Development of Gas Metering and Calibration System”, IRPA Funded Research Project, Ministry of Science, Technology & Environment, Jan. 1997 - Dec. 2000 (Gas Engineering - Gas Distribution)(Vot 72023 – Rm172,700.00)

2. “Development of Gas Injection System for Natural Gas Motorcycle”, IRPA Funded Research Project, Ministry of Science, Technology & Environment, Jan. 2000 - Dec. 2001 (Gas Engineering - Gas Utilisation) (Vot 72346 – RM272,600.00)

3. “Development of Natural Gas Injection System for Small Engines”, IRPA Funded Research Project, Ministry of Science, Technology & Environment, June. 2000 - Dec. 2005 (Gas Engineering - Gas Utilisation)

4. “Pressure Characterisation of High Pressure Water Jet from Underground Water Pipeline to Reduce Erosion Effect on Natural Gas Pipes”, Shirt Term UTM Research Grant, Dec. 2009 – June 2011. (Vot 77348 – RM20, 000.00)

5. “Development of Standards Distance between Gas and Water Pipeline and other Piping Utulities”, UTM GUP Tier 2, June. 2011 – March 2012. (Vot 00J77 – RM40, 000.00)

6. “Sustainable Low Carbon Emission Compressed Natural Gas-Biodiesel Diesel Fual System for Transportation Sector in Malaysia”, UTM GUP Tier 1 Dis. 2012 – 31 March. 2015 (RM160, 000.00)

6. “The Effect of Pipe Material and Flow Rate on The Effectiveness of Odorisation System for Natural Gas Pipig System in High Rise Building” UTM GUP Tier 15 Nov. 2015 – 14 Nov. 2017 (RM50, 000.00)


______________________________________________________________________________


Member for the following projects

1. “Physical and Physiochemical Properties of Local Montmorillonit”, IRPA Funded Research Project, Ministry of Science, Technology & Environment, Jan. 1989 - May. 1990 (Petroleum Engineering - Production Engineering)

2. “Optimisation of Parameters of Coal Fired Cements Kilns”, IRPA Funded Research Project, Ministry of Science, Technology & Environment, Jan.1993 - Dec. 1995 (Gas Engineering - Gas Utilisation)

3. “Development of Gas Calibration System using Sonic Nozzle Prover”, Universiti Teknologi Malaysia Funded Research Project, Jan. 1995 - Dec. 1995 (Gas Engineering - Gas Distribution)

4. “Natural Gas for Motorcycle”, Universiti Teknologi Malaysia Funded Research Project, August 1998 - August 1999 (Gas Engineering - Gas Utilisation)

5. “Development of Testing System for Gas Piping Equipments”, Universiti Teknologi Malaysia Funded Research Project, August 1998 - August 1999 (Gas Engineering - Gas Distribution)

6. “Development of Fuel System for Natural Gas Motorcycle”, IRPA Funded Research Project, Ministry of Science, Technology & Environment, Jan. 1999 - Dec. 2000 (Gas Engineering - Gas Utilisation)

7. “Development of Testing System for Gas Piping and Components” IRPA Funded Research Project, Ministry of Science, Technology & Environment, Jan.1999 - Dec. 2000 (Gas Engineering - Gas Distribution) (Vot 72203 – RM600,400.00)

8. “Network Analysis for Steady State System”, Universiti Teknologi Malaysia Funded Research Project, 15 June 1999 - 15 June 2000. (Gas Engineering - Gas Distribution) (Vot 71484 – RM14,000.00)

9. “Performance and Emission Study of NGV Motorcycle”, Universiti Teknologi Malaysia Funded Research Project, 15 June 1999 - 15 June 2000. (Gas Engineering - Gas Utilisation)

10. “Development of Absorbent Natural Gas Cylinder for Natural Gas Vehicles (Motorcycle & Motorcars)”, IRPA Funded Research Project, Ministry of Science, Technology & Environment, June 1999 - Dec. 2000. (Gas Engineering - Gas Utilisation) (Vot 72246 – RM171,000.00)

11. “The Development of Absorption Chiller System for Malaysian Domestic Application”, IRPA Funded Research Project, Ministry of Science, Technology & Environment, June 1999 - Dec. 2000. (Gas Engineering - Gas Utilisation) (Vot 72248 – RM119, 700.00)

12. “Development of A Single Step Pressure Reduction for The Natural Gas Vehicle - Motorcycle System (NGVM) ” IRPA Funded Research, Ministry of Science, Technology & Environment, September, 2003 - December, 2005. (Gas Engineering – Gas Distribution and Planning) (Vot 74169 – RM278, 300.00)

13. “Pressure Drop Performance in Gas Custody Transferthrough Domestic Gas Meter Operations” Universiti Teknologi Malaysia Funded Research Project, July, 2002 – June, 2003 (Gas Engineering – Gas Distribution) (Vot 71859 – RM19, 000.00)


______________________________________________________________________________


14. “Development of Integrated Geographic Information System (GIS) and Network Analysis System” IRPA Funded Research, Ministry of Science, Technology & Environment, September, 2000 - December, 2004. (Gas Engineering – Gas Distribution and Planning) (Vot 72349 – RM126, 350.00)

15. “Formulation and Characterization of Backfilling Materials for Newly Formulated Blending Mechanism”, FRGS – MOSTI, April, 2010 – April, 2012. (Vot 78585 - RM44, 000.00)

16. “Low Carbon Emission Compressed Natural Gas-Dual Diesel Fuel (CNG-DDF) System for Greener Engine” Universiti Teknologi Malaysia Funded Research Project, GUP: Tier 1, April, 2011 – April, 2013 (Gas Engineering – Gas Distribution) (Q.J130000.7142.01H63 – RM$ 170,000.00)

17. “Gaseous Fuel System for On Road Diesel Engine”, REF: TF0908D118; Technofund Grants for Pre- Commercilisation Project: Ministry of Science, Technology and Innovation (MOSTI), January, 2009 - July, 2011. (PowerBrass Sdn. Bhd.) (RM4, 550,000.00)

18. “Effescts of NOX and Carbon Residue Emission torwards Global Warming via Compressed Natural Gas-Dual Fuel System (CNG-DDF) Green Sustanable Engine”, FRGS – MOSTI, April, 2012 – March, 2014. (Vot 78585 - RM44, 000.00)

19. “Perfromance and Emission Effect of Multi-variant Biodiesel Fuelling to DDF Sustanable Green Enginee Low Carbon”, UTM, GUP Grant Tier 1, 01/12/13 – 31/12/2014, (Vot: 03H42, RM: RM160, 799.00)

20. “Chaterization of Barrier Properties of Organic Paints: The Nanozinc Dust Effetiveness”. UTM GUP Tier1, 01/12/13 – 31/12/2014

(Vot: 03H54, RM 160, 799.00) 21. “Microwave Irradiated Effect on Thermal Pyrolysed Functional

Components Group for Activated Carbon Gas Adsorption Property”. UTM, GUP Tier 1, 01/04/2014 – 31/03/2016 (Vot: 06H79, RM 94, 745.18)

22. “Characterization of Barrier Properties of Organic Paints: The Nanozinc Dust Effectiveness”. UTM, GUP Tier 1, 01/12/2012 – 31/03/2015 (Vot 03H54: RM 160, 789.00)

23. “Integrated Single Stage Gas Emissions Carbon Adsorption and Comparative to Multi-Stage Performance Study Of Post Palm Bunch Ash Process”. UTM, GUP Tier 1, 01/07/2016 – 30/06/2017 (Vot 13H94: RM 49,990.00)

24. Sustainable and Greener Environment Via Biofuel Based Aviation Fuel. UTM, GUP Tier 2, 01/10/2016 – 31/12/2017 (Vot 13H94: RM 20,00.00)


______________________________________________________________________________


10. CONSULTANCY 10.1 International Level

1. Compatibility Study of Copper Pipe with Local Gas Composition funded by Copper Development Centre, South East Asia, May - December 2000.

2. Lifespan Analysis of Pipeline System and Corrosion of OPSO – MV Orchid – SeaTech Sollution Pte. Ltd, Singapore (2007)

10.2 National Level

1. Introductory Course In Gas Technology/FKKKSA-UTM/1991 2. A Course In Gas Distribution for Professionals: Introduction/JLPP-

UTM/1992 3. Introductory Course of Gas Engineering to MARA - BCIT

Students/FKKKSA-UTM/1992 4. Course in Gas Distribution for Professionals/JLPP/64004/ 1999 5. A Course in Gas Distribution for Contractors/ JLPP/64404/1994 6. Design and Development of Semi Positive Rotary Type Piston Water

Meter - Vertical, Co-operation with Metering Design and Development Group - MDDG, FKKKSA, SIRIM and Petra Teknologi Air Sdn. Bhd., June 1993 - May 1994

7. Design and Development of Semi Positive Rotary Type Piston Water Meter - Horizontal, Co-operation with Metering Design and Development Group - MDDG, FKKKSA, SIRIM and Petra Teknologi Air Sdn. Bhd. June 1993 - May 1994

8. Design and Development of Domestic Gas Diaphragm Meter, Co- operation with Metering Design and Development Group - MDDG, FKKKSA, SIRIM and Petra Exim Sdn. Bhd. 1994

9. Invited Lecturer for a Course/Training In Gas Distribution for Professionals, Module 1: Introduction to the Gas Industry, Organized by Petroleum Training Committee, UTM, 1994, 1995, 1996, 1997

10. Invited Lecturer for A Professional Course for Gas Contractor, Organised by Petroleum Training Committee, Module 1: Gas Industry in Malaysia, held at Wisma Darul Iman Kuala Terengganu, Mei, 1994

11. Introductory Course in Gas Engineering for FKKKSA Laboratory Staff/FKKKSA-UTM/1995

12. Invited Lecturer for A Professional Course for Gas Contractor, Organised by Petroleum/Gas Training Committee, Module 1: Intoduction to the Gas Industry, held at UTM, Jalan Semarak, Kuala Lumpur, 1995, 1996, 1997, 1998

13. Invited Lecturer for A Course/Training for Gas Fitter Class III, Module 2 : Basic Mathematics & Science and Module 6 : Material and Components of Gas Piping System, Organised by Gas Technology Centre, UTM, held at UTM Jalan Semarak, Kuala Lumpur, April, 1999, November 1999, March 2000, March -Nov. 2001, April 2002

14. Technical Advisor for Gas Nilam Sdn. Bhd. from March 1998 - March 1999. (Gas Engineering - Gas Distribution)

15. Preparation of National Examination for Gas Fitter Competency Test, Bahagian Kawalselia dan Keselamatan Gas, Jabatan Bekalan Elektrik dan Gas, Malaysia, Nov 2000 – Present


______________________________________________________________________________


16. Physical and Observational Check of Various Hi-Tech.

Safety Product, Hijau Baiduri Sdn. Bhd., Oct. 2000. (Gas Engineering - Gas Safety)

17. Development of Gas Safety Course Module for Mid Valley Megamall/GASTEG - UTM /Jan. – March 2000

18. Gas Network Analysis for Natural Gas Piping System at Claytan Sdn. Bhd. - Air Hitam Factory, Metrapac Sdn. Bhd., Jan. 2001 – June 2001 (Gas Engineering - Gas Distribution)

19. Fuel Oil to Natural Gas Burner Conversion for Claytan Sdn. Bhd. - Air Hitam Factory, Metrapac Sdn. Bhd., Jan. 2001 - Dis 2001 Gas Engineering – Utilisation)

20. Invited Lecturer for a Course/Training in Gas Distribution for Gas Engineers and Gas Engineering Supervisors, Module 4: Piping Material and Components, Organized by Gas Technology Centre (GASTEG), UTM, 2000, 2001, Feb. 2002

21. Invited Lecturer for a Course/Training in Gas Distribution for Gas Engineers and Gas Engineering Supervisors, Module 4: Piping Material and Components, Organized by Gas Technology Centre (GASTEG), UTM, 2001

22. Invited Lecturer for a Course/Training in Gas Distribution for Gas Engineers and Gas Engineering Supervisors, Module 4: Piping Material and Components, Organized by Gas Technology Centre (GASTEG), UTM, 2002

23. Invited Lecturer for a Course/Training in Gas Distribution for Gas Fitters 4: Piping Material and Combustion, Organized by Gas Technology Centre (GASTEG), UTM, 2000



26. Invited Lecturer for a Course/Training for Gas Fitter Class III, Module GF3-01; Properties of Fuel Gases, GF3-02: Basic Piping System for Fuel Gases, Organised by Gas Technology Centre, UTM, held at UTM Jalan Semarak, Kuala Lumpur, 2003




30. Invited Lecturer for a Course/Training for Gas Fitter Class II, Module GF3-01; Properties of Fuel Gases, GF3-02: Basic Piping System for Fuel Gases, Organised by Gas Technology Centre, UTM, held at UTM Jalan Semarak, Kuala Lumpur, 2003


______________________________________________________________________________


31. Invited Lecturer for a Course/Training for Gas Fitter Class II, Module

GF3-01; Properties of Fuel Gases, GF3-02: Basic Piping System for Fuel Gases, Organised by Gas Technology Centre, UTM, held at UTM Jalan Semarak, Kuala Lumpur, 2004



34. Infrastructural Studies on the Implementation of NGV System In Malaysia/EPU/2005/6

35. A Course in Gas Distribution for Professionals: Module 9: Piping Materials and Componentns/GASTEG-UTM/2007

36. A Course/Training for Gas Fitter Class I, GF1-01: Fuel Gases and Piping System/GASTEG-UTM/2007

37. A Course/Training for Gas Fitter Class II, GF2-01(a): Properties of Fuel Gases/GASTEG-UTM/2007 Investigation on Gas Pipeline Leakages & Breakages by Physical & Theoretical Analysis, Gas Malaysia Sdn Bhd, September – Dec. 2005

38. Investigation on Gas Pipeline Leakages & Breakages by Experimental and Simulation Studies (Horizantal Jetting), Gas Malaysia Sdn Bhd, May – Dec. 2006/Session 10

39. A Course/Training for Gas Fitter Class II, GF2-01(b): Fuel Gases Piping System/GASTEG-UTM/2007/Session 10

40. A Course/Training for Gas Fitter Class II, GF2-01(a): Properties of Fuel Gases/GASTEG-UTM/2007/Session 09


42. A Course/Training for Gas Fitter Class III, GF2-01: Properties of Fuel Gases/GASTEG-UTM/2007/Session 28


44. A Course/Training for Responsible Person, RP-01: Properties of Fuel Gases Piping /GASTEG-UTM/2007/Session 19

45. A Course/Training for Responsible Person, RP-01: Properties of Fuel Gases Piping /GASTEG-UTM/2007/Session 20

46. A Course/Training for Responsible Person, RP-01: Fuel Gases Piping System/GASTEG-UTM/2007/Session 19

47. A Course/Training for Responsible Person, RP-01: Fuel Gases Piping System/GASTEG-UTM/2007/Session 20

48. A Course/Training in Gas Distribution for Gas engineers and Gas Engineering Supervisors Session 28: Piping Material and Componets, Organized by Gas Technology Centre (GASTEG), UTM, 2008

49. A Course/Training for Gas Fitter Class II, GF2-01(a): Poperties of Fuel Gases/GASTEG-UTM/2008/Session 11


51. A Course/Training for Gas Fitter Class II, GF2-06: Basic Combustion/GASTEG-UTM/2008/Session 11


______________________________________________________________________________


52. A Course/Training for Gas Fitter Class II, GF2-12: Project

Management/GASTEG-UTM/2008/Session 11 53. A Course/Training in Gas Distribution for Gas engineers and Gas

Engineering Supervisors Session 29: Piping Material and Componets, Organized by Gas Technology Centre (GASTEG), UTM, 2008

54. A Course/Training for Gas Fitter Class II, GF2-12: Project Management/GASTEG-UTM/2008/Session 12

55. A Course/Training for Gas Fitter Class II, GF2-01(a): Poperties of Fuel Gases/GASTEG-UTM/2009/Session 13


57. A Course/Training for Gas Fitter Class II, GF2-06: Basic Combustion/GASTEG-UTM/2009/Session 13

58. A Course/Training for Gas Fitter Class III, GF3-01: Sifat-Sifat Bahan Api Gas/GASTEG-UTM/2009/Session 29 (AS)

59. A Course/Training for Gas Fitter Class III, GF3-01: Asas Sistem Perpaipan Bahan Api gas/GASTEG-UTM/2009/ Session 29 (AS)

60. A Course/Training in Gas Distribution for Gas Engineers and Gas Engineering Supervisors Session 29: Piping Material and Componets, Organized by Gas Technology Centre (GASTEG), UTM, 2008

61. A Course/Training in Gas Distribution for Gas Engineers and Gas Engineering Supervisors Session 30: Piping Material and Installation, Organized by Gas Technology Centre (GASTEG), UTM, 2009

62. Investigation on Gas Pipeline Leakages & Breakages by Experimental and Simulation Studies (Vertical Jetting), Gas Malaysia Sdn Bhd, Dec 2008 – Jun. 2009

63. Engineering Audit on Sabah Energy Coporation Sdn Bhd, Energy Commission, June – Dec. 2012

64 Effectiveness of Commercial and Residential Natural Gas Odorisation System in Peninsula Malaysia, Energy Comission, May – Dec. 2012.

65. Business oppurtunities in Oil and Gas Industry, CEDAR, June 2013-Feb 2014)

66. Engineering Audit on Sabah Energy Coporation Sdn Bhd, Energy

Commission, June – Dec. 2016.

11. WRITING / PUBLICATION

11.1 Book.Monohraph (Origianl Typescript) 1. Zulkifli Abdul Majid, Zainal Zakaria, Khairol Sozana Nor

Kamaruddin, Mohd Norani Abdul Rahman: “Gas Supply Regulation 1997”, Publisher, Percetakan Nasional Berhad (PNB),

1997(Translation) 2. Zulkefli Yaacob, Zulkifli Abdul Majid, Rahmat Mohsin, Jamal Asri

Othman: “Guidelines for Copper Gas Piping”, Publisher: Energy Commission, Malaysia (EC), 2001

3. Zulkefli Yaacob, Zulkifli Abdul Majid, Rahmat Mohsin, Jamal Asri Othman: “Guidelines on domestic Gas Piping System”, Publisher: Energy Commission, Malaysia (EC), 2008


______________________________________________________________________________


11.3 Penulisan Bab Di Dalam Buku

1. A Study on Air-Fuel Mixing System For NGV Motorcycle System, Zulkifli Abdul Majid, Rahmat Mohsin, Nor Faizal Bin Nordin, Advanced Gas Technology 1, Penerbit UTM, 31-58, Chapter 2, ISBN 978-983-52-0598-9

2. Emission And Performance Evaluation of Motorcycle, Zulkifli Abdul Majid, Zulkefli Yaacob, Rahmat Mohsin, Advanced Gas Technology 1, Penerbit UTM, 79-96, Chapter 4, ISBN 978-983-52-0598-9

3. Water Jetting Impact On Natural Gas Piping (Abrasion Effect And Metal Thinning), Zulkifli Abd Majid, Rahmat Mohsin, Fadhli Omar, Advanced Gas Technology 1, Penerbit UTM, 97-113, Chapter 5, ISBN 978-983-52-0598-9

4. Experimental and numerical investigation of high-pressure water jetting effect toward NPS8 natural gas pipeline integrity-Establishing safety distance perimeter. Majid, Z. A., Mohsin, R. & Long, T. F. 25 Aug 2015 Handbook of Materials Failure Analysis with Case Studies from the Oil and Gas Industry. Elsevier Inc., p. 267-290 24 p.

11.4 Monograf Penyelidikan

1. Development of Integrated Geographic Information System (GIS) and Gas Network Analysis, Rahmat Mohsin, Zulkifli Abd. Majid, Zulkefli Yaacob, ISBN 978-967-353-219-3

2. Drop Performance In Gas Custody Transfer through Dom estic Gas Meter Operations, Rahmat Mohsin, Zulkifli Abd. Majid, Zulkefli Yaacob, ISBN 978-967-353-219-3

3. Development of gas Metering and Calibration System, Zulkifli Abd. Majid, Rahmat Mohsin, Zulkefli Yaacob, ISBN 978-967-353-219-3

4. Pembangunan Sistem Pengujian untuk Perpaipan Gas dan Komponen, Zulkefli Yaacob, Rahmat Mohsin, Zulkifli Abd. Majid, ISBN 978-967-353-219-3

5. Development of Fuel System for Natural Gas Motorcycle, Zulkefli Yaacob, Zulkifli Abd. Majid, Rahmat Mohsin, ISBN 978-967-353-219-3

6. Pembangunan Sistem Suntikan Untuk Motorsikal Gas Asli, Zulkifli Abd. Majid, Zulkefli Yaacob, Rahmat Mohsin, ISBN 978-967-353-219-3

11.5 Article International Journal

1. Zulkifli Abdul Majid, Rahmat Mohsin, Zulkefli Yaacob: “The effects of

Fuel Combustion on lubricating oil properties of bi-fuel motorcycle”, Global Journal of Engineering and Technology, Volume 1, number 3 (2008) 343-352

2. Z.A. Majid, R. Mohsin, Z. Yaacob, and Z. Hassan: “Failure Analysis of Natural Gas Pipes”, Engineering Failure Analysis 17(2010) 818-837 (Impact Factor: 1.023)

3. Z.A. Majid, M. Rahmat, and M.Z. Yusoff: “Failure Investigation of Natural Gas Pipes”, Arabian Journal of Science and Engineering, Vol. 37, 4(2012), 1083-1088 (Impact Factor: 0.243)

https://pure.utm.my/en/publications/experimental-and-numerical-investigation-of-high-pressure-water-j



https://pure.utm.my/en/persons/zulkifli-abdul-majid

https://pure.utm.my/en/persons/rahmat-mohsin

https://pure.utm.my/en/persons/zulkifli-abdul-majid/publications/?type=%2Fdk%2Fatira%2Fpure%2Fresearchoutput%2Fresearchoutputtypes%2Fcontributiontobookanthology%2Fchapter


______________________________________________________________________________


4. Z.A. Majid, R. Mohsin, and M.Z. Yusof: “Experimental and Computer Failure Analysis of Natural Gas Pipe“, Engineering Failure Analysis 19(2012) 32-42 (Impact Factor: 1.023)

5. Z.A. Majid, R. Mohsin: “Multiple Failure of Natural Gas Pipeline“, Engineering Failure Analysis 31(2013) 421-429. ((Impact Factor: 1.023)

6. Z.A. Majid, R. Mohsin: “Comparative Study on Exhaust Emission and Engine Performance Of Single Cylinder Spark-Ignited Engine Operated on Gasoline and Natural Gas “, International Journal of Advanced Engineering Applications, Vol. 1, Iss, 5, pp. 35-43.

7. Z.A. Majid, R. Mohsin: “Nox Emission from Bi-fuel Motorcycle “, International Journal of Engineering and Technology (IJET). Vol 3, No. 7, July 2013, 773-778.

8. Z.A. Majid, R. Mohsin, M.Z. Yusof: “Multiple Failure of Natural Gas Pipeline: Experimentl and Computational Approaches“, Engineering Failure Analysis, 34(2013), pp 10-23.

9. Z.A. Majid, R. Mohsin, M.Z. Yusof: “Safety Distance Between Underground Natural Gas and Water Pipeline Facilities”, Reliability Engineering and System Safety, 131(2014), pp 53-60.

10. Z.A. Majid, R. Mohsin: “Erosive Failure of Natural Gas Pipeline“, paper accepted for publication in Pipeline Systems Engineering and Practice, American Asociation of Civil Engineers. J. Pipeline Syst. Eng. Pract. 04014005 http://dx.doi.org/10.1061/(ASCE)PS.1949-1204.0000170

11. R.Mohsin, Z.A. Majid:”The Effect of Fuel Types on Lubricatong Oil Properties of Bi-Fuel Motorcycle”, World Applied Sciences Journal, 32(3), 2014, pp 5050-511.

12. A. Supee, M.S. Shafeez, R. Mohsin, Z.A. Majid: “Performance of Diesel-Compressed Natural Gas (CNG) Dual Fuel (DDF) Engine via CNG-Air Venturi Mixjector Applicstion”’ Arabian Journal for Sceince and Engineering, DOI10.1007/s 13369-014-1313-2.

13. R. Mohsin, Z.A. Majid, A.H. Shihnan, N.S. Nasri, Z. Sharer: “Effect of Biodiesel Blends on Engine Performance and Exhaust Emission for Diesel Dual Fuel Engine”, Energy Conversion and Management, 88(2014), pp 821-828.

14. Numerical analysis of wall shear patterns on the external wall of an API 5L X42 natural gas pipe. R Mohsin, ZA Majid, FL Tan, Engineering Failure Analysis 48, 30-40.

15. Effect of biodiesel blend on exhaust emission and engine performance of diesel dual fuel engine. R Mohsin, ZA Majid, AH Shihnan, NS Nasri, Z Sharer. Iranica Journal of Energy and Environment 6 (3), 154-160.

16. CO2 adsorption-breakthrough study on activated carbon derived from renewable oil palm empty fruit bunch. NS Nasri, HM Zain, HD Usman, ZA Majid, Z Sharer, NA Sazali, Australian Journal of Basic and Applied Sciences 9 (26 Special), 67-71

17. Comparative Study on Exhaust Emission and Engine Performance of Single Cylinder Spark-Ignited Engine Operated on Gasoline and Natural Gas. ZA Majid, R Mohsin, NS Nasri. International Journal of Engineering and Technology 5 (5).

18. Engine Performance and Exhaust Emission of Diesel Dual Fuel Engine Fuelled By Biodiesel, Diesel And Natural Gas. ZA Majid, R Mohsin, AH. Shihnan. Jurnal Teknologi 78 (6), 59-67.

19. Effect Of Bioethanol on Engine Performance and Exhaust Emissions of A Diesel Fuel Engine. ZA Majid, R Mohsin, NS Nasri. International Journal of Technology 7 (6), 972-980.

http://dx.doi.org/10.1061/%28ASCE%29PS.1949-1204.0000170

https://scholar.google.com.my/citations?view_op=view_citation&hl=en&user=8uczdPgAAAAJ&citation_for_view=8uczdPgAAAAJ:maZDTaKrznsC

https://scholar.google.com.my/citations?view_op=view_citation&hl=en&user=8uczdPgAAAAJ&citation_for_view=8uczdPgAAAAJ:maZDTaKrznsC

https://scholar.google.com.my/citations?view_op=view_citation&hl=en&user=8uczdPgAAAAJ&citation_for_view=8uczdPgAAAAJ:BqipwSGYUEgC

https://scholar.google.com.my/citations?view_op=view_citation&hl=en&user=8uczdPgAAAAJ&citation_for_view=8uczdPgAAAAJ:BqipwSGYUEgC

https://scholar.google.com.my/citations?view_op=view_citation&hl=en&user=8uczdPgAAAAJ&citation_for_view=8uczdPgAAAAJ:YFjsv_pBGBYC

https://scholar.google.com.my/citations?view_op=view_citation&hl=en&user=8uczdPgAAAAJ&citation_for_view=8uczdPgAAAAJ:YFjsv_pBGBYC

https://scholar.google.com.my/citations?view_op=view_citation&hl=en&user=8uczdPgAAAAJ&cstart=20&citation_for_view=8uczdPgAAAAJ:hFOr9nPyWt4C



https://scholar.google.com.my/citations?view_op=view_citation&hl=en&user=8uczdPgAAAAJ&cstart=20&citation_for_view=8uczdPgAAAAJ:lSLTfruPkqcC

https://scholar.google.com.my/citations?view_op=view_citation&hl=en&user=8uczdPgAAAAJ&cstart=20&citation_for_view=8uczdPgAAAAJ:lSLTfruPkqcC

https://scholar.google.com.my/citations?view_op=view_citation&hl=en&user=8uczdPgAAAAJ&cstart=20&citation_for_view=8uczdPgAAAAJ:ZHo1McVdvXMC

https://scholar.google.com.my/citations?view_op=view_citation&hl=en&user=8uczdPgAAAAJ&cstart=20&citation_for_view=8uczdPgAAAAJ:ZHo1McVdvXMC


______________________________________________________________________________


20. Adsorptive removal of phenol from aqueous solution on a modified

palm shell based carbon: fixed-bed adsorption studies. Garba, A., Nasri, N. S., Basri, H., Ismail, R., Abdul Majid, Z., D. Hamza, U. & Mohammed, J. 14 May 2016 In : Desalination and Water Treatment. p. 1-12 12 p.

11.3 Local Referred Journal

1. A. Supee, R. Mohsin, Z.A. Majid, M.I. Raiz, “Effect of compressed Natural Gas (CNG) Injector Position on Intake Manifold towards Diesel-CNG Dual Fuel (DDF) Engine Performance”, Junal Teknologi, 70:1(2014), pp 107-115 (Scopus)

2. Z.A. Majid, R. Mohsin, M.Z. Yusof, ”Erosive Wear of Natural Gas Pipes Due to High Velocity Jet Impact: Physical Examination and Experimental Study”, Jurnal Teknologi (56) (Sains & Kej.), Keluaran Khas (1), Dis. 2011, pg 1-25 (Scopus)

3. Z.A. Majid, R. Mohsin, M.Z. Yusof, ”Erosive Wear of Natural Gas Pipes Due to High Velocity Jet Impact: Computer Simulation Study”, Jurnal Teknologi (56) (Sains & Kej.), Keluaran Khas (1), Dis. 2011, pg 27-52 (Scopus)

4. F. Omar, Z.A. Majid, R. Mohsin and S. Aizuddin: “Water Jetting Impact on Natural Gas Piping”, The IEM Journal, Vol. 72, No. 2, June, 2011, pg. 43 – 48

5. A Single Step Pressure Regulation System for the Natural Gas Motorcycle, Rahmat Mohsin, Zulkefli Yaacob, Zulkifli Abdul Majid & Shameed Ashraf, Jurnal Teknologi – Kejuruteraan, Penerbit UTM, September, 2010, 1 – 17; 53 (Scopus).

6. Finite Element Stress Analysis on Natural Gas Motorcycle Intake Manifold, Zulkefli Yaacob, Rahmat Mohsin, Zulkifli Abdul Majid, Irene The Hui Lin & Rosdi Baharim, Jurnal Teknologi F, Penerbit UTM, Dec.-2008, 311-322; 49(F) (Scopus).

7. Performance Curve in Domestic Gas Meter Calibration System, Rahmat Mohsin, Noor Shafine Ramly@Hassan & Zulkifli Abd. Majid, Jurnal Teknologi F, Penerbit UTM, Dec.-2008, 323-339; 49(F) (Scopus).

8. Erosive Wear of Natureal Gas Pipeline, Zulkifli Abd. Majid, Rahmat Mohsin, Zulkefli Yaacob & Fadhli Omar, Jurnal Teknologi F, Penerbit UTM, Dec.-2008, 341-356; 49(F) (Scopus).

9. Failure Analysis of Natural Gas Pipelines, Z. Abdul Majid, R. Mohsin and Z. Yaacob, Journal of Chemical and Natural Resources Engineering, FKKKSA, Dec.,2008, 122-132; Vol.2(2)

10. Overall Performance of Domestic Gas Meter Operations, R. Mohsin, Z. Abdul Majid, N.S. Nasri and L. Kim Kiat, Journal of Chemical and Natural Resources Engineering, FKKKSA, Dec.,2008, 77-90; Vol.2(1)

11. Pressure Drop Performance in Gas Custody Transfer Through Domestic Gas Meter Operation, R. Mohsin, Z. Abdul Majid, N.S. Nasri and L.Kim Kiat, Journal of Chemical and Natural Resources Engineering, FKKKSA, Dec.,2008, 20-27; Vol.2(3)

12. Water Jetting Impact on Natural Gas Pipeline, Z. Abdul Majid, R. Mohsin and F. Omar, Journal of Chemical and Natural Resources Engineering, FKKKSA, Dec.,2008, 80-89; Vol.2(3)

https://pure.utm.my/en/publications/adsorptive-removal-of-phenol-from-aqueous-solution-on-a-modified-

https://pure.utm.my/en/publications/adsorptive-removal-of-phenol-from-aqueous-solution-on-a-modified-

https://pure.utm.my/en/persons/noor-shawal-nasri

https://pure.utm.my/en/persons/razali-ismail-2

https://pure.utm.my/en/persons/zulkifli-abdul-majid

https://pure.utm.my/en/persons/zulkifli-abdul-majid/publications/


______________________________________________________________________________


13. Fuel Consumption and Exhaust Emission of the Non-Loaded Operation

CNG Engine, R. Mohsin, Z. Yacob, Z. Abdul Majid and S. Ashraf, Journal of Chemical and Natural Resources Engineering, FKKKSA, Dec.,2008, 54-67; Vol.2(4)

14. Water Condensation in Low Pressure Steam Turbine: A Nucleation Theory – Part I, R. Mohsin, Z. Yacob, Z. Abdul Majid and S. Ashraf, Journal of Chemical and Natural Resources Engineering, FKKKSA, Dec.,2008, 40-49; Vol.2(5)

15. Water Condensation in Low Pressure Steam Turbine: A Nucleation Theory – Part II, R. Mohsin, Z. Yacob, Z. Abdul Majid and S. Ashraf, Journal of Chemical and Natural Resources Engineering, FKKKSA, Dec.,2008, 50-63; Vol.2(5)

16. Bi-Fuel NGVM Engine Emission Results Based on Non-Loaded System Operation, R. Mohsin, Z. Yacob, Z. Abdul Majid and S. Ashraf, Journal of Chemical and Natural Resources Engineering, FKKKSA, March, 2009, 22-33; Vol. 4(1)

17. Inherent Fuel Consumption and Exhaust Emission of the CNG-Petrol Bi-Fuel Engine Based at Non-Loaded Operation, Jurnal Teknologi A, Penerbit UTM, Rahmat Mohsin, Zulkefli Yaacob, and Zulkifli Abd. Majid, Shameed Ashraf, Jun, 2008, 1–18, 48(A)

18. A Single Step Pressure Regulation System for the Natural Gas Motorcycle, Jurnal Teknologi A, Penerbit UTM, Rahmat Mohsin, Zulkefli Yaacob, Zulkifli Abd. Majid, Shameed, Disember, 2008, 49(F)

19. Domestic Gas Custody Transfer Operations: Pressure Drop Analysis In Metering Performances, Journal of Chemical and Natural Resources Engineering, FKKKSA, Rahmat Mohsin, Zulkifli Abd. Majid, Liaw Kim Kiat, Kuljit Singh Khaira, 2008.

11.4 Bulletin

1. Zulkifli Abdul Majid: “Liquified Natural Gas”, Buletin FKKKSA, Jilid 6.

Bil. 1/1992. 2. Zulkifli Abdul Majid: “Kesan Kelembapan ke atas Kadar Kebocoran

Gas”, Buletin FKKKSA, Jilid 9. Bil. 1/1995

11.5 Teaching Monograph 1. Postgraduate Diploma Project Assignments/The Reasons and Problems

for the Renewed Interest in Natural Gas and Liquefied Natural Gas World Wide During Late 1980s and Early 1990s/The Review of Gas Utilisation Opportunities in the three Market Sector Industrial, Commercial and Domestic/College of Petroleum Studies, Oxford, UK/1990

2. M. Sc Disertation/Data Acquisition System for Frequency Meters/University of Salford, UK/1991

3. Monograph/Introduction to Gas Industry In Malaysia / UTM/1993 4. Monograph/Fuel Technology and Combustion/1997 5. Monograph/Management and Economic of Natural Gas/1998 6. Monograph/LPG Technology/1999

7. Monograph/Pipe Materials & Fittings/1999 8. Monograph/Basic Mathematic and Science/1999 9. Monograph/Material and Piping Components for Gas Piping

System/1999


______________________________________________________________________________


10. Monograph/Basic Piping System/1999 11. Monograph Standard/Accreditation Booklet ISOG25/Calibration Lab - Quality Manual/2000 12. Monograph Standard/Accreditation Booklet ISOG25/Calibration

Service Lab - Quality Procedure/2000 13. Monograph Standard/Accreditation Booklet ISO17025/Calibration

Service Lab - Quality Manual/2000 14. Monograph Standard/Accreditation Booklet ISO17025/Calibration

Service Lab - Quality Manual/2000 15. Monograph/A Guideline for Copper piping System/2001 16. Monograph/Gas Safety Course/2002 17. Monograph/Safe Work Practices/2002 18. Monograph/Properties of Fuel Gas/2002 19. Monograph/Basic Piping System for Natural Gas and LPG/2002 20. Monograph/Piping Materials/2002 21. Monograph/Combustion/2003 22. Monograph/Piping materials and Components/2006 23. Monograph/Fuel Gases and Piping System/2007 24. Monograph/A Guideline for domestic Piping system/2007 25. Monograph/ Overview of fuel gases and Piping System/2007

11.4 Working Paper

Refereed International / Regional Proceedings 1. Dr. Zulkefli Yaacob, Zulkifli Abdul Majid, and Martin Philip King Ik Piau:

“Exhaust Emission from Bi-Fuel Motorcycle”, paper presented at Sixth International Conference on Small Engine, their Fuels and The Environment, Paradise Hotel, Johor Bahru, 22-24th April, 1999

2. Dr. Zulkefli Yaacob, Zulkifli Abdul Majid, Martin Philip King Ik Piau: “Low Emission from Bi Fuel Motorcycle”, paper presented at World Engineering Congress, Sheraton Subang, 19-22nd July 1999

3. Dr. Zulkefli Yaacob, Zulkifli Abdul Majid, Martin Philip King Ik Piau: “A Study on Exhaust Emission, Performance and Lubricating Oil Effects on Natural Gas Motorcycle”, paper presented at Jordan International Chem. Eng. Conference III, Amman, Jordan, 27-29th Sept. 1999

4. Zulkifli Abdul Majid, Dr. Zulkefli Yaacob, and Dr. Rahmat Mohsin: “Interchangeability of Liquified Petroleum Gas and Natural Gas”, paper presented at Osaka Gas R & D Forum ’99, Osaka, Japan, 9-12th Nov. 1999

5. Yang Kong Woh, Dr. Zulkefli Yaacob, Zulkifli Abdul Majid, Dr. Rahmat Mohsin, Mariani Idroas: “Analysis of Gas Networks by Newton Loop-Node Method”, paper presented at Osaka Gas R & D Forum ’99, Osaka, Japan, 9-12th Nov.1999

6. Dr. Zulkefli Yaacob, Zulkifli Abdul Majid, Martin King Ik Piau, and Dr. Rahmat Mohsin: “Natural Gas Powered Motorcycle”, paper presented at Osaka Gas R & D Forum ’99, Osaka, Japan, 9-12th Nov. 1999

7. Zulkafli Hassan, Dr. Zulkefli Yaacob, Zulkifli Abdul Majid: “The Effect Using Natural Gas and Gasoline as Combustion Fuel on the Properties of a four Stroke Motorcycle Engine Oil”, paper presented at Osaka Gas R & D Forum ’99, Osaka, Japan, 9-12th Nov. 1999

8. Yang Koh Woh, Dr. Zulkefli Yaacob, Zulkifli Abdul Majid, Dr. Rahmat Mohsin, Mariani Idroas: “Network Analysis for Steady State Gas Flow”,


______________________________________________________________________________


paper presented at Regional Symposium on Chemical Engineering 1999, Songkla, Thailand, 22-24th Nov. 1999

9. Martin Philip King Ik Piau, Dr. Zulkefli Yaacob, Zulkifli Abdul Majid: “A Comparison Study on Engine Oil for Natural Gas and Gasoline Motorcycle”, paper presented at Regional Symposium on Chemical Engineering 1999, Songkla, Thailand, 22-24th Nov. 1999

10. Dr. Zulkefli Yaacob, Zulkifli Abdul Majid, Martin Philip King Ik Piau: “Toward Cleaner City with Bi-Fuel Motorcycle”, paper presented at Indian Chemical Engineering Congress 1999, Chandigarh, Panjab India, 20-23rd Dec.1999

11. Dr. Zulkefli Yaacob, Zulkifli Abdul Majid, Dr. Rahmat Mohsin, Martin Philip King Ik Piau: “Natural Gas Motorcycle for Cleaner Cities”, paper presented at Regional Conference on Energy & Environment, UNITEN, 15-16th February 2000

12. Dr. Rahmat Mohsin, Dr. Mohd. Zamri Yusoff, Dr. Zainol Asri Mamat, Zulkifli Abdul Majid, Dr. Zulkefli Yaacob: “A Quasi 3-Dimensional Treatment of Two-Phase Flows of Steam In A Low Pressure Steam Turbine”, paper presented at Regional Conference on Energy & Environment, UNITEN, 15-16th February 2000

13. Dr. Rahmat Mohsin, Dr. Mohd. Zamri Yusoff, Dr. Zainol Asri Mamat, Zulkifli Abdul Majid, and Dr. Zulkefli Yaacob: “Wetness in Steam Turbine- A Meridional Treatment”, paper presented at Regional Conference on Energy & Environment, UNITEN, 15-16th Feb. 2000

14. Zulkifli Abdul Majid, Dr. Zulkefli Yaacob, and Martin Philip King Ik Piau: “Utilisation of Natural Gas Motorcycle”, paper presented at International Conference on Advances in Strategic Technologies 2000, UKM 15-17th August 2000

15. Zulkifli Abdul Majid, Zulkefli Yaacob, and Yang Kong Woh: “Optimisation of Gas Flow Using Network Analysis (Newton Loop-Node Method)”, paper presented at International Conference on Advances in Strategic Technologies 2000, UKM, 15-17th August 2000

16. Rahmat Mohsin, Zulkifli Abdul Majid, Zulkefli Yaacob, Liaw Kim Kiat: “Calibration and Traceability: Its Importance in the Industry”, paper presented at International Conference on Advances in Strategic Technologies 2000, UKM, 15-17th August 2000

17. Rahmat Mohsin, Zulkifli Abdul Majid, Zulkefli Yaacob, Liaw Kim Kiat: “The Important of Domestic and Industrial Gas Meter Calibration: Relevancy to Malaysia Application”, paper presented at International Conference on Advances in Strategic Technologies 2000, UKM, 15-17th August 2000

18. Yang Kong Woh, Zulkefli Yaacob, Zulkifli Abdul Majid, Rahmat Mohsin, Mariani Idroas: “Software Development for Gas Network Simulation in Malaysia”, paper presented at GASEX 2000, Conference and Exihibition, Pattaya, Thailand, 11-14th September 2000

19. Martin Philip King Ik Piau, Zulkefli Yaacob, Zulkifli Abdul Majid, Rahmat Mohsin: “Development of Natural Gas Motorcycle in Malayisa”, paper presented at GASEX 2000, Conference and Exihibition, Pattaya, Thailand, 11-14th September 2000

20. Parani Kumar Subramaniam, Zulkefli Yaacob, Nor Aishah Saidina Amin, Zulkifli Abdul Majid: “Low Pressure Storage System to Enhance the Usage of Natural Gas Powered Motorcycle in Malaysia”, paper presented at GASEX 2000, Conference and Exihibition, Pattaya, Thailand, 11-14th September 2000


______________________________________________________________________________


21. Zulkifli Abdul Majid, Zulkefli Yaacob, Martin Philip King Ik Piau: “Natural Gas Motorcycle - Emission”, paper presented at 7th International Cenference & Exhibition on Natural Gas Vehicles, Yokohama, Japan, 17-20th October 2000

22. Rahmat Mohsin, Zulkifli Abdul Majid, Zulkefli Yaacob, Liaw Kim Kiat: “Industrial Gas Measuring Device and Calibration System”, paper presented at Regional Symposium on Chemical Engineering (RSCE 2000), Singapore, 11-13th December 2000

23. Rahmat Mohsin, Zulkifli Abdul Majid, Zulkefli Yaacob, Liaw Kim Kiat: “Gas Flow Measurement Device and Calibration System for Domestic Gas Meter”, paper presented at Regional Symposium on Chemical Engineering (RSCE 2000), Singapore, 11-13th December 2000

24. Rahmat Mohsin, Zulkifli Abd. Majid, Liaw Kim Kiat, Zulkefli Yaacob, Rohiyati Salehun: “Industrial Gas Metering and Calibration Scenario in Malaysian Gas Industry”, paper presented at South East Asia Hydrocarbon Flow Measurement Workshop, Cyberview, Cyberjaya, 10 - 13th September 2001

25. Rahmat Mohsin, Zulkifli Abd. Majid, Liaw Kim Kiat, Zulkefli Yaacob, Rohiyati Salehun: “A Development of Calibration System for Domestic Gas Meter”, paper presented at South East Asia Hydrocarbon Flow Measurement Workshop, Cyberview, Cyberjaya, 10 - 13th September 2001

26. Zulkifli Abd. Majid, Zulkefli Yaacob: “NOx Emission from Bi-Fuel Motorcycle”, paper presented at Regional Conference on Natural Resources and Environmental Management 2001, Sarawak, 18 - 20th October 2001

27. Zulkifli Abd. Majid, Zulkefli Yaacob, Rahmat Mohsin, Yasmin Ahmad Khan: “Managing Our Environment Through The Use of Clean Fuel”, paper presented at Regional Symposium on Environment and Natural Resources, Kuala Lumpur, 10 - 11th April 2002

28. Zulkifli Abdul Majid, Zulkefli Yaacob, Rahmat Mohsin, Yasmin Ahmad Khan: “The Use of Natural Gas As a Fuel for Motorcycle”, paper presented at 4th Asian Science and Technology Congress 2002, Kuala Lumpur, 25 - 27th April 2002

29. Zulkifli Abdul Majid, Zulkefli Yaacob, Yasmin Ahmad Khan: “Compatibility of Malaysian LPG With Copper Pipe”, paper presented at GASEX 2002, Conference and Exhibition, Brunei Darussalam, 27 - 30th May 2002

30. Zulkifli Abdul Majid, Zulkefli Yaacob, Martin Philip King, Mohd Adnan Yahya: “Lubrication Oil Properties of Bi-Fuel Motorcycle”, paper presented at GASEX 2002, Conference and Exhibition, Brunei Darussalam, 27 - 30th May 2002

31. Mazran Esro, Zulkifli Abdul Majid, Zulkefli Yaacob: “A Study on Natural Gas Motorcycle Control System Using Microcontroller Unit”, paper presented at GASEX 2002, Conference and Exhibition, Brunei Darussalam, 27 - 30th May 2002

32. Zulkifli Abdul Majid, Zulkefli Yaacob, Mohd Adnan Yahya: “A Comparison Study on Engine Oil Properties for Bi-Fuel Motorcycle”, paper presented at 2nd World Engineering Congress 2002, Sarawak, 22nd - 25th July 2002

33. Rahmat Mohsin, Zulkifli Abdul Majid, Zulkefli Yaacob, Shamed Ashraf, “Prototype Development of a Single Step Pressure Regulation System for Natural Gas Motorcycle”, Bilboa Spain, GASTECH 2005 International Conference & Exhibition., 16-12 Mac 2005


______________________________________________________________________________


Working Paper - National Refereed Proceedings

1. Zulkifli Abdul Majid, Zainal Zakaria, Nik Azhan Nik Hashim: “Penentuan

Injap Keselamatan Sistem Storan GPC”, paper presented at Seminar Kebangsaan Institut Jurutera Kimia Malaysia, Wisma Darul Iman, Kuala Terengganu, Terengganu, 18-19 June 1995

2. Dr. Zulkefli Yaacob, Zulkifli Abdul Majid, Zulkafli Hassan, Jamal Asri Othman: “Training Opportunities in the Gas Industry”, paper presented at Seminar Perundangan & Keselamatan Gas, Sofitel Hotel, Senai, Johor, 6th April 1999

3. Dr. Zulkefli Yaacob, Zulkifli Abdul Majid, Zulkafli Hassan, Jamal Asri Othman: “Gas Industry Training at Gas Technology Centre (GASTEG)”, paper presented at Seminar Perundangan & Keselamatan Retikulasi Gas, Equatorial Hotel, Pulau Pinang, 25th May 1999

4. Dr. Zulkefli Yaacob, Zulkifli Abdul Majid, Zulkafli Hassan, Jamal Asri Othman: “Pengenalan Industri Gas”, paper presented at Seminar on Opportunities of Entrepreneur in the Gas Industry, Dewan Menara, KOMTAR, Johor Bahru, 19th June 1999

5. Dr. Zulkefli Yaacob, Zulkifli Abdul Majid, Zulkafli Hassan, Jamal Asri Othman: “Industri dan Penggunaan Gas Asli serta Gas Petroleum Cecair“, paper presented at Seminar on Opportunities of Entrepreneur in the Gas Industry, Dewan Menara, KOMTAR, Johor Bahru, 19th June 1999

6. Zulkifli Abdul Majid, Dr. Zulkefli Yaacob, Dr. Rahmat Mohsin, Martin King Ik Piau: “Cleaner Emission from Natural Gas Powered Motorcycle”, paper presented at Malaysian Science & Technology Congress ’99, Hilton Kuching, Sarawak, 8-10th Nov. 1999

7. Zulkifli Abdul Majid, Dr. Zulkefli Yaacob, Dr. Rahmat Mohsin, Martin King Ik Piau: “Combustion effect of Natural Gas Powered Motorcycle on Lubrication Oil”, paper presented at Malaysian Science & Technology Congress ’99, Hilton Kuching, Sarawak, 8-10th Nov. 1999

8. Dr. Zulkefli Yaacob, Zulkifli Abdul Majid, Zulkafli Hassan, Jamal Asri Othman, Dr. Rahmat Mohsin: “Competency Training in Gas Industry at Gas Technology Centre (GASTEG)”, paper presented at Seminar Perundangan & Keselamatan Retikulasi Gas, MS Garden Hotel, Kuantan, 18th Nov. 1999

9. Parani Kumar Subramaniam, Dr. Zulkefli Yaacob, Dr. Nor Aishah Saidina Amin, Martin Philip King Ik Piau, Zulkifli Abdul Majid: “ Low Pressure Storage System for Natural Gas Vehicles in Malaysia for New Millenium”, paper presented at Malaysian Science & Technology Congress ’99, Crowne Plaza Hotel , Johor Bahru, 6-8th Dec. 1999

10. Zulkifli Abdul Majid, Dr. Zulkefli Yaacob, Dr. Rahmat Mohsin, Zainurita Mohd Adnan: “Calibration of Domestic Gas Meters using Bell Prover”, paper presented at Malaysian Science & Technology Congress ’99, Crowne Plaza Hotel, Johor Bahru, 6-8th Dec. 1999

11. Yang Kong Woh, Dr. Zulkefli Yaacob, Zulkifli Abdul Majid, Dr. Rahmat Mohsin, Mariani Idroas: “Software Development for Gas Network Analysis”, paper presented at Malaysian Science & Technology Congress ’99, Crowne Plaza Hotel, Johor Bahru, 6-8th Dec. 1999

12. Dr. Zulkefli Yaacob, Zulkifli Abdul Majid, Zulkafli Hassan, Jamal Asri Othman: “Gas Industry Training at Gas Technology Centre”, paper presented at Seminar Perundangan & Keselamatan Retikulasi Gas, Kota Kinabalu, Sabah, 26th Jun 2000


______________________________________________________________________________


13. Rahmat Mohsin, Zulkifli Abdul Majid, Zulkefli Yaacob, Liaw Kim Kiat: “Studies on Gas Meter Calibration System for Domestic Gas Meter”, paper presented at Simposium Jurutera Kimia Ke 13, UKM, 30-31st October 2000

14. Rahmat Mohsin, Zulkifli Abdul Majid, Zulkefli Yaacob, Liaw Kim Kiat: “Development of Industrial Gas Meter Calibration System”, paper presented at Simposium Jurutera Kimia Ke 13, UKM, 30-31st October 2000

15. Zulkefli Yaacob, Zulkifli Abdul Majid, Rahmat Mohsin: “Malaysian and International Experience in Gas Piping System”, paper presented at Seminar on Introduction of Alternative Material for Gas Reticulation, PWTC, Kuala Lumpur, 2nd November 2000

16. Zulkefli Yaacob, Yang Kong Woh, Zulkifli Abdul Majid, Rahmat Mohsin, and Mariani Idroas: “Network Analysis For Steady State Gas Flow”, paper presented at MGA Technical Conference 2000 on The Life Cycle Development of Gas Pipeline, Shangri-La Hotel, Kuala Lumpur, 7-8th November 2000

17. Martin Philip King Ik Piau, Zulkifli Abdul Majid, Zulkefli Yaacob, Rahmat Mohsin: “The Development of Natural gas Motorcycle in Malaysia”, paper presented at MGA Technical Conference 2000 on The Life Cycle Development of Gas Pipeline, Shangri-La Hotel, Kuala Lumpur, 7-8th November 2000

18. Erwan Hashim, Zulkifli Abdul Majid, Zulkefli Yaacob, Rahmat Mohsin: “Determination of Hydrogen Sulfide Content in LPG”, paper presented at MGA Technical Conference 2000 on The Life Cycle Development of Gas Pipeline, Shangri-La Hotel, Kuala Lumpur, 7-8th November 2000

19. Raja Nor Rafidah, Zulkifli Abdul Majid, Zulkefli Yaacob, Rahmat Mohsin: “The Utilisation of Copper Pipe for Fuel Gas Pipeline at 200 kPa and Below”, paper presented at MGA Technical Conference 2000 on The Life Cycle Development of Gas Pipeline, Shangri-La Hotel, Kuala Lumpur, 7-8th November 2000

20. Rahmat Mohsin, Zulkifli Abdul Majid, Zulkefli Yaacob, Liaw Kim Kiat: “Development of Domestic and Industries Gas Meter Calibration System”, paper presented at MGA Technical Conference 2000 on The Life Cycle Development of Gas Pipeline, Shangri-La Hotel, Kuala Lumpur, 7-8th November 2000

21. Parani Kumar Subramaniam, Zulkefli Yaacob, Nor Aishah S. Amin, Zulkifli Abdul Majid: “Low Pressure Storage System to Enhance The Usage of Natural Gas Powered Motorcycle in Malaysia”, paper presented at MGA Technical Conference 2000 on The Life Cycle Development of Gas Pipeline, Shangri-La Hotel, Kuala Lumpur, 7-8th November 2000

22. Zulkifli Abdul Majid, Rahmat Mohsin, Zulkefli Yaacob, Yang Kong Woh: “The Use of Newton Loop-Node Method to Analyse a Gas Network”, paper presented at Malaysian Science & Technology Congress 2000, Awana Genting, 7-9th November 2000

23. Zulkefli Yaacob, Zulkifli Abd. Majid, Zulkafli Hassan, Jamal Asri Othman, : “Latihan Kekompetenan di Pusat Teknologi Gas”, paper presented at Seminar Perundangan dan Keselamatan Retikulasi Gas, Kota Bharu Kelantan, 27th March 2001

24. Dr. Noor Shawal Nasri, Dr. Zulkefli Yaacob, Zulkifli Abd. Majid, Dr. Rahmat Mohsin: “Emerging Technology in Gas Utilisation”, paper presented at Seminar Retikulasi Gas, Ipoh, 20th August 2001


______________________________________________________________________________


25. Zulkifli Abd. Majid, Zulkefli Yaacob, Martin Philip King, Mod Adnan Yahya, Mohd Masri Razak: “Emission Characteristics of Bi-Fuel Motorcycle”, The 15th Symposium of Malaysian Chemical Engineers, Johor Bahru, 11 – 12th September 2001

26. Zulkifli Abd. Majid, Zulkefli Yaacob, Rahmat Mohsin, Mohd Adnan Yahya: “Emission of NOx, Carbon Monoxide and Unburned Hydrocarbon from Bi-Fuel Motorcycle”, Malaysian Science and Technology Congress 2001, Melaka, 8 – 10th October 2001

27. Zulkefli Yaacob, Zulkifli Abd. Majid: “Overview of MS 930, Bengkel MS 930 dan MS 930: Maklumbalas Industri”, Shah Alam, 12th November 2001

28. Rosdi baharim, Chin Vie Dee, Venabula Eka Indraguna, Zulkfrli Yaacob, Zulkifli Abdul Majid: “Natural Gas Fuel Delivery System for NGV Dynamometer”, The 17th Symposium of Malaysian Chemical Engineers (SOMChE 2003)

29. Rahmat Mohsin, Zulkifli Abd. Majid, “Training Opportunities in Gas Technology at Gas Technology Centre”, Hyatt Regency Johor Bahrru, Safety Awareness, Relevent Acts and Regulations for Natural Gas and LPG Utilisation, 8 Sep 2005

30. Zulkefli Yaacob, Zulkifli Abdul Majid, “Technical and Engineering Aspects of Gas Utilisation”, Hyatt Regency Johor Bahrru, Safety Awareness, Relevent Acts and Regulations for Natural Gas and LPG Utilisation, 8 Sep 2005

31. Rahmat Mohsin, Zulkifli Abdul Majid, Jamal Asri Othman, “Sifat-Sifat dan Risiko Keselamatan penggunaan LPG di Sekolah-Sekolah”, Grand Season Hotel, Seminar Sehari Keselamatan LPG untuk Jabatan Pendidikan Kuala Lumpur, 28 Sep. 2005

32. S.H. Chang, Rahmat Mohsin, Zulkefli Yaacob, Zulkifli Abdul Majid, “Effect of Injection Position on Throttle Body Injection Mixer for Compressed Natural Gas Motorcycle”, Kota Kinabalu Sabah, SOMCHEE-2005, 8-10 Dec. 2005

33. Zulkifli Abdul Majid, Rahmat Mohsin, Jamal Asri Othman, “Risiko Keselamatan penggunaan LPG di Sekolah-Sekolah”, Holiday Inn Glenmerie Hotel, Shah Alam, Seminar Sehari Keselamatan LPG untuk Jabatan Pendidikan Kuala Lumpur, 20 Jun. 2006

Research Papers – National/University / Faculty

1. Rahmat Mohsin, Zulkifli Abdul Majid, Rosman Samingan, and Mohd Redhuan Ramlee: “Pembangunan Kemudahan Penentukuran Meter Gas Menggunakan Pembukti Muncung Bunyi Sonik”, paper presented at Research Seminar 1995, Federal Hotel, Kuala Lumpur, 2nd Sept. 1995

2. Zulkifli Abdul Majid: “IRPA RM7 Project Progress Report”, paper presented to the Evaluation Panel, IRPA Project - Energy Sector, Sofitel Hotel, and 11-12th August 1999

3. Dr. Zulkefli Yaacob, Zulkifli Abdul Majid, Zulkafli Hassan, Dr. Rahmat Mohsin, and Jamal Asri Othman: “Gas Technology Centre”, paper presented to the delegation from Sabah Energy Corp. Sdn. Bhd. FKKKSA, 26th January 2000

4. Dr. Zulkefli Yaacob, Zulkifli Abdul Majid, Zulkafli Hassan, Dr. Rahmat Mohsin, and Jamal Asri Othman: “Gas Technology Centre”, paper presented to Jabatan Bekalan Elektrik dan Gas Malaysia, 19th May 2000


______________________________________________________________________________


11.5 Others

Consultation/Research Reports

1. Rahmat Mohsin, Zulkifli Abd. Majid: “Technical Report On the Development of Domestic Water Meter Model UTM-PTA13”, submitted to Petra Teknologi Air Sdn. Bhd., February, 1994

1. Rahmat Mohsin, Zulkifli Abd. Majid: “Technical Report On the Development of Domestic Gas Meter”, submitted to Petra Exim Sdn. Bhd., February 1994

2. Zulkifli Abdul Majid, Rahmat Mohsin: “Preparation of Paten Documents of Fluid Flow Meter - UTMPTA-13”, submitted to Bustaman & Co. for paten application, 1997

3. Zulkifli Abdul Majid, Rahmat Mohsin: “Gas Metering and Calibration System”, yearly report submitted to Research Management Centre, 1999

4. Zulkifli Abdul Majid, Zulkefli Yaacob: “Determination of Hydrogen Sulfide Content in Malaysian Natural Gas and Liquefied Petroleum Gas”,consultation report submitted to Copper Development Centre, South East Asia, 12th December 2000

6. Zulkifli Abdul Majid, Rahmat Mohsin: “Development of Gas Calibration System Using Sonic Nozzle Prover”, final report (Vot 61791) submitted to Research Management Centre, 2001

7. Zulkefli Yaacob, Zulkifli Abdul Majid, Yasmin Ahmad Khan: “Sizing of Copper Pipe”, consultation report submitted to Copper Development Centre, South East Asia, June 2001

8. Zulkefli Yaacob, Zulkifli Abdul Majid: “Pressure Drop Calculation for Natural Gas Piping System at Calytan Factory Air Hitam Johor”,, consultation report submitted to Multrapac Engineering Sdn Bhd, 2001

9. Zulkefli Yaacob, Zulkifli Abdul Majid, Yang Kong Woh: “Network Design for Natural Gas Piping System at KKIP Area, Sabah”, consultation report submitted to Sabah Energy Corp. Sdn Bhd. July 2001

10. Zulkefli Yaacob, Zulkifli Abdul Majid, Azeman Mustafa: “Performance and Emission Study on NGV Motorcycle”, final report (Vot 71484) submitted to Research Management Centre, 2002

11. Zulkifli Abdul Majid, Zulkefli Yaacob, Rahmat Mohsin, Rosilawati Ayob: “Development of Gas Injection System for Natural Gas Motorcycle”, final report (Vot 72346) submitted to Research Management Centre, 2003

12. Zulkefli Yaacob, Zulkifli Abdul Majid, Rahmat Mohsin, Mariani Idroas: “Network Analysis for Steady State System”, final report (Vot 71484) submitted to Research Management Centre, 2003

13. Zulkefli Yaacob, Rahmat Mohsin, Zulkifli Abdul Majid, Zulkafli Hassan, Hasman Mat, Jamal Asri Othman: “Development f Testing System for Gas Piping System and Component”, final report (Vot 72203) submitted to Research Management Centre, 2003

14. Zulkifli Abdul Majid, Rahmat Mohsin, Zulkefli Yaacob, Law Kim Kiat: “Development of Gas Metering an Calibration System”, final report (Vot 72023) submitted to Research Management Centre, 2003

15. Zulkefli Yaacob, Rahmat Mohsin, Zulkifli Abdul Majid, Zulkafli Hassan, Hasman Mat, Noramali Ngah Ahmad: “Development f Testing System


______________________________________________________________________________


for Gas Piping System and Component”, final report (Vot 71425) submitted to Research Management Centre, 2004

16. Zulkefli Yaacob, Rahmat Mohsin, Zulkifli Abdul Majid, Zulkafli Hassan: “The Incident Investigation of Gas Pipeline” consultation report submitted Gas Malaysia Sdn Bhd”, GASTEG, Vot 69881, 2006

17. Rahmat Mohsin, Zulkifli Abdul Majid, Zulkefli yaacob, Zulkafli Hassan: ”Study on The Natural Gas Pipeline Safety Distances” consultation report submitted Gas Malaysia Sdn Bhd”, GASTEG, Vot 69881, 2007

Technical Reports

1. Rahmat Mohsin, Zulkifli Abd. Majid, Noor Shawal Nasri: “Working Paper on the Appointments of Visiting Professor - Prof. Rahim Kamil Sulaiman - Gas Pantai Timur Sdn. Bhd.”, submitted to the Board of Faculty, July 1994

2. Zulkifli Abdul Majid, Mohd Norani Abdul Rahman, Zainal Zakaria: “Development of Gas Metering and Calibration System”, IRPA Research Proposal submitted and approved by Ministry of Science, Technology & Environment, October 1995

3. Zulkifli Abdul Majid, Zulkefli Yaacob, Rahmat Mohsin, Azeman Mustapha: "Working Paper on the Establishment of Centre of Gas Technology (GASTEC)", submitted and presented to the Board of Faculty and to the University Senate, June 1997

4. Zulkifli Abdul Majid, Zulkefli Yaacob: “Working Paper on Establishment of Francais Program (Gas Contractor Course) at Institut Yayasan Alor Gajah”, submitted to the Gas Training Committee, November 1997

5. Norlaila Alias, Zulkifli Abdul Majid: “Preparation of Curriculum and Syllabus of Diploma Teknologi Mekanikal (Gas)”, submitted to Pusat Pengajian Diploma, UTM, March 1997

6. Zulkifli Abdul Majid: “Introduction to the Gas Industry”, submitted to Gas Technology Centre, Gas Contractor Course, 1997

7. Zulkifli Abdul Majid, Zainal Zakaria: “Application of Additional Budgets for a Shade Buildng and Calibration Labs”, submitted to the Board of Faculty, 1997

8. Zulkifli Abdul Majid: “Guildines of Curriculum and Syllabus for Gas Engineering Subjects”, submitted to Polymer and Gas Engineering Department, 1997

9. Zulkefli Yaacob, Zulkifli Abdul Majid, Martin Philip King Ik Piau: “Natural Gas Motorcycle”, submitted and presented to MODENAS (Research Collaboration between UTM and MODENAS), 1997

10. Zulkifli Abd. Majid, Jamal Asri Othman, Mohd Redhuan Ramlee: "Fuel Testing and Combustion Laboratory Work Sheets", 1st edition”, submitted to the Gas Engineering Department, June 1998

11. Zulkifli Abd. Majid, Jamal Asri Othman, Mohd Redhuan Ramlee, "Gas System Laboratory Work Sheets 1st edition“, submitted to the Gas Engineering Department, June 1998

12. Zulkifli Abdul Majid, Jamal Asri Othman, Zulkifli Yaacob: "Working Paper on the Establishment of Gas Fitter Course", submitted and presented to the Technical Committee of Gas Technology Centre, February 1998

13 Zulkifli Abdul Majid, Zulkefli Yaacob: "Working Paper on the Establishment of Gas Management Course for Contractors", submitted and presented to the Technical Committee of Gas Technology Centre, February 1998


______________________________________________________________________________


14. Zulkefli Yaacob, Zulkifli Abdul Majid, Jamal Asri Othman: “Reevaluation of LPG Piping System at FKKKSA”, submitted to Pengarah Kerja UTM, August 1998

15. Zulkefli Yaacob, Zulkifli Abdul Majid, Zulkafli Hassan: “Development of Dual -Fuel Motorcycle”, IRPA Research Proposal submitted and approved by Kementerian Sains & Teknologi Alam Sekitar, December 1998

16. Zulkefli Yaacob, Zulkifli Abdul Majid, Zulkafli Hassan: “Development of Testing System for Gas Piping Equipmenst & Components”, IRPA Research Proposal submitted and approved by Ministry of Science, Technology & Environment, December 1998

17. Zulkefli Yaacob, Zulkifli Abdul Majid, Zulkafli Hassan, Dr. Nor Aishah Saidina Amin: “Development of Absorbent Natural Gas Cylinder for NGV, Motorcycle and Motorcars (Low Pressure Cylinder)”, IRPA Research Proposal submitted and approved by Kementerian Sains & Teknologi Alam Sekitar, June 1998

18. Zulkefli Yaacob, Zulkifli Abdul Majid, Zulkafli Hassan: “The Development of Absorption Chiller System for Malaysian Domestic Application”, IRPA Research Proposal submitted and approved by Kementerian Sains & Teknologi Alam Sekitar, June 1998

19. Zulkifli Abdul Majid, Zulkefli Yaacob, Mariani Idroas,: “Analysis of Gas Networks for Steady State System”, Short Term Research Proposal submitted and approved by Research Management Centre, UTM, November 1998

20. Zulkifli Abdul Majid, Zulkefli Yaacob, Azeman Mustafa: “Performance and Emission Study on NGV Motorcycle”, Short Term Research Proposal submitted and approved by Research Management Centre, UTM, November 1998

21. Zulkifli Abdul Majid, Zulkefli Yaacob, Zulkafli Hassan: “Development of Testing System for Gas Piping Equipments”, Short Term Research Proposal submitted and approved by Research Management Centre, UTM, November 1998

22. Zulkifli Abdul Majid: “Basic Mathematics and Science”, submitted and presented to Gas Technology Centre, Gas Fitter Course, Jan. 1999

23. Zulkifli Abdul Majid, Rahmat Mohsin: “Material and Component for Gas Piping System”, submitted and presented Gas Technology Centre, Gas Fitter Course, January 1999

24. Zulkefli Yaacob, Zulkifli Abdul Majid, Jamal Asri Othman: “Proposal on LPG Reticulation System for Terengganu Safety Training Centre Sdn. Bhd.”, submitted to Terengganu Safety Training Centre Sdn. Bhd., February 1999

25. Zulkifli Abdul Majid, Rahmat Mohsin: "Working Paper on the Appointments of Visiting Professor - Prof. Alan Williams – University of Leeds, UK” submitted to the Board of Faculty, September 1999

26. Zulkifli Abdul Majid, Zulkefli Yaacob, Martin Philip King Ik Piau, Rahmat Mohsin: “Development of Gas Injection System for Natural Gas Motorcycle (NGVM)”, IRPA Research Proposal submitted and approved by Kementerian Sains & Teknologi Alam Sekitar, Feb. 2000

27. Zulkifli Abdul Majid, Zulkeflli Yaacob: Memorandum of Understanding between UTM and Sabah Energy Corporation Sdn. Bhd., submitted to Research Mangement Centre, UTM, June 2000

28. Zulkifli Abdul Majid, Rahmat Mohsin: "Gas Metering and Calibration System”, submitted to JKKP Faculty, Sep. 2000


______________________________________________________________________________


29. Zulkeflli Yaacob, Zulkifli Abdul Majid, Rahmat Mohsin: "Working Paper On the Appointments of Visiting Professor - Ir. Dr. Johari Basri - Jabatan Keselamatan dan Kesihatan Pekerja”, submitted and presented to the Board of Faculty, September 2000

30. Zulkifli Abdul Majid, Jamal Asri Othman, Zulkifli Yaacob: "Working Paper on the Establishment a Course for Responsible Persons", submitted and presented to the Jabatan Bekalan Elektrik dan Gas Malaysia, 30th November 2000

31. Zulkifli Abdul Majid, Zulkefli Yaacob, Ahmad Shaiful Khairulnizam: The Study on Control System for Natural Gas Injection System”, GASTEG, FKKKSA, UTM, October 2001

32. Zulkifli Abdul Majid, Zulkefli Yaacob, Rahmat Mohsin, Mohd Masri Razak, Mazran Esro: “Project Proposal on NGV Motorcycle”, Submitted to Special Project, PETRONAS/ GASTEG, FKKKSA, UTM, October 2001

33. Zulkifli Abdul Majid, Tahmat Mohsin, Liaw Kim Kiat: “Developmet of Calibration technology for Natural gas Metering System”, FKKKSA, UTM, March 2001

34. Zulkifli Abdul Majid, Zulkefli Yaacob, and Mohd Adnan Yahya: “Development of Gas Injection System for Two Stroke Bi-Fuel Motorcycle”, GASTEG, FKKKSA, UTM, May 2001

35. Zulkifli Abdul Majid, Wan Mohd Nasir Wan Mahmud: “The Use of Natural Gas for Portable Generator”, GASTEG, FKKKSA, UTM, October 2001

Articles for the Science & Technology Encyclopaedia – UTM & DBP

Author for 20 articles

Evaluator for 3 articles Substantive editor for 58 articles

An Indexer for 58 articles

12. CO-CURICULUM 12.1 Association / Society

1. Member of Koperasi Universiti Teknologi Malaysia, 1989 - Present 2. Ahli Jawatankuasa Badan Kebajikan Taman Senai Utama, 1996 - 1998 3. Advisor for GASTECH (Persatuan Pelajar Kejuruteraan Gas), 1996 -

2002 4. Honorary Corporate Member of Malaysian Gas Association (MGA) 5. Advisor for GESS (Persatuan Pelajar Kejuruteraan Gas), 2004-Present

12.2 Sports

1. Representative of the faculty for Badminton team in a tournament

between FKKKSA - PETRONAS Research Scientific & Services Sdn. Bhd., 1994/1995


______________________________________________________________________________


2. Representative of an academic group for Badminton (interfaculty), 1999 - 2000

3. Salford University Badminton Team Member, 1991 12.3 Community Service

1. An Introductory Course on Gas Engineering to MARA - BCIT Students (MARA - British Columbia Gas Trades Program) - 3rd. Group, 1992

2. Blood Donor Campaign, UTM, KL, 1993, 1994. 3. Proposing 5 Days Course in Gas Technology to PETRONAS Training

Centre (PERMATA) Bangi for Petronas Staffs and Related Personnel, 1994

4. Coordinator for Basic Training Cource in Gas Engineering for FKKKSA’s Technichian, 1995

5. Coordinator for Basic Training Cource in Gas Engineering Laboratory for FKKKSA’s Technichian, 1997

6. Lecture on Fuel Technology and Combustion for SPACE program, 1998-1999

7. Lecture on Gas Act dan Safety for SPACE program, 1999 8. Lecture on “Pengenalan Industri Gas”, Seminar on Opportunities of

Entrepreneur in the Gas Industry, Dewan Menara, KOMTAR, Johor Bahru, 19th June 1999

9. Lecture on “Industri dan penggunaan Gas Asli serta Gas Petroleum cecair”, Seminar on Opportunities of Entrepreneur in the Gas Industry, Dewan Menara, KOMTAR, Johor Bahru, 19th June 1999

10. Committee Member for “Seminar Perundangan dan Keselamatan Retikulasi Gas”, Jabatan Bekalan Elektrik dan Gas Malaysia, 1999 - 2001

11. Committee Member for the Development of National Skill Standards (NOSS) - Gas Fitter, 27th April 2001 – present

10. Coordinator for Basic Training Cource in Gas Engineering Laboratory for FKKKSA’s Technichian, 2003

13. AWARDS AND ACHIEVEMENT

1. Most Popular Lecturer, 1989, SPE Student Chapter (UTM) 2. Appreciation - Instructor for JLPP Course/1992 3. Appreciation - Laboratory Safety Seminar UTM Level/ FKKKSA/1992 4. Appreciation - Instructor to An Introductory Course In Gas

Technology/FKKKSA/1992 5. Appreciation - Instructor to An Introductory Course In Gas Engineering to

Laboratory Staff/FKKKSA/1992 6. Industrial Development and Management Program,

PPTP - ADB), 1993 7. Appreciation - Head of Fuel Testing Lab (10/12/1994)

8. Achievement Award - PARR Instrument Company, US, 1995 9. Certificate of Achievement (Excellent) - Tokyo Gas Co., Ltd., 1995

10. Certificate of Distinction - FKKKSA 1998 11. Most Attractive Booth, INATEX ’99 - Research Management Centre, UTM 1999 12. Certificate of Distinction - FKKKSA, UTM, 1998 13. Certificate of Group Working Achievement - FKKKSA 1999. 14. Appreciation - Morning Briefing for FKKKSA Staff, 1999 (31/12/1999) 15. Appreciation - Participation in INATEX 1998, 1999 & 2000


______________________________________________________________________________


16. Appreciation - Expert Panel - Gas Engineering, Encyclopedia of Science & Technology, UTM-DBP (31/10/2001)

17. Appreciation - Head of Gas Engineering Panel (2000) 18. Appreciation - Head of Gas Transmission and Distribution Panel (31/1/2001)

19. Appreciation - Facilitator for Gas Safety Course (27/7/2001) 20. Competent Gas Engineering Supervisor, JBEG (PKG) -128 (24/7/2001)

21. Certificate of Excellence – UTM, 2001 22. Appreciation - Instructor to an Introductory Course In Gas Engineering to

Laboratory Staff/FKKKSA/2003 23. Malaysian Patent MY-129405-A (Fluid Flow Meter) 24. COPYRIGHT – SIMGAS Ver 1.3 25. COPYRIGHT – GasStor Ver 1.3 26. Bronze Medal for Fluid Flow meter at the 36th International Exhibition of

Inventions of New Techniques and Products Geneva, 2nd – 6th April 2008 27. Best Training Institute for Natural Gas award from Suruhanjaya Tenaga, 2011. 28. Best Training Institute for Natural Gas award from Suruhanjaya Tenaga, 2013.

14. OTHER CONTRIBUTIONS

14.1 National 1. Committee Member for Conference on Gas Safety and Legislation organised by

Energy Commission, 1999 - Present 2. Committee Member for the Development of National Skill Standards (NOSS) –

Gas Fitter, 27th April 2001

14.2 University / Faculty 1. Expert Advisor for LPG Reticulation Project in UTM, PHB UTM 2. Involved in R & D exhibition during promotional week of Science & Technology

of Pejabat Pendidikan Daerah Kulai, 9-11th April 2002 3. Preparation of Top down RM8 IRPA Research Proposal to Kementerian Sains

Teknologi & Alam Sekitar (Natural Gas Vehicles), November 2000 4. Facilitator for Strategic Planning for IRPA RM8, Natural Gas Vehicle, Energy

Focus Group, 17-19th November 2000 5. Participate in INATEX ’2000 – Motorcycle for New Millennium, 2000 6. Preparation of Quality Manual for Gas Calibration Unit, 1999 - 2000 7. Preparation of Procedure Quality for Gas Calibration Unit, 1999 - 2000 8. Alternate Proctor for Canadian Welding Bureau, July 1999 9. Participate in INATEX ’99 - Natural Gas Motorcycle 10. Involved in Research Exhibition during the launching of UTM as a Discovery

University on 28 August 1999 by the Prime Minister at Dewan Sultan Iskandar, UTM.

11. Involved in R & D exhibition during promotional week of Science & Technology of Johor State, launched on 18 Sep. 1999 at Dewan Sultan Iskandar, UTM

12. Preparation of documents and Materials for RTM Documentary Film on Research and Development, October 1999

13. Short talk on motivation during morning briefing for faculty staff on 26 June, 1999

14. Interview Officer for New Tutor (Gas Engineering) Intake (1998, 2000) 15. Participate in INATEX ’98 - Fluid Flow Meter 16. Participate in R & D exhibition at Foyer Pentadbiran UTM Disember 1998 17. Preparation of a Pamphlet for Gas Engineering Research Group - 1998


______________________________________________________________________________


18. Facilitator for Training in Gas Engineering Laboratoties for a Technician, 1997 19. Acting Head of Gas Engineering Department on 17 – 19th August 1992, 21 - 24

January 1994, 21 - 30 October 1995, 30 June - 6 July 1998 and 8 - 14 December 1998

20. Facilitator for Basic Gas Engineering Course for a Technician, 28 July - 11 August 1995

21. Committee member of Regional Symposium on Computer in the Petroleum Industry (CAP’89)/1989

22. Committee member of Computer Club (UKOM)/1989 23. Committee member of National Seminar on Gas Industry, held at

PERMATA/1989

15. COURSES, TRAINING AND SEMINARS ATTENDED

1. One day Seminar on Islamic Intellectual, Dewan Sultan Iskandar, Universiti Teknologi Malaysia, Skudai, March, 1989.

2. An Introduction Seminar of the Use of Apple Computer in Academic Research and Development, Institute of Computer Science, Universiti Teknologi Malaysia, Skudai, 1989.

3. National Symposium on Computer Applications in Petroleum Industry, Bilik Jumaah, Universiti Teknologi Malaysia, Jln. Semarak, December, 1989.

4. Lecturer Teaching Course, (6 months) organized by UTM Training Unit, 1989. 5. 1991 Course in Parallel Processing, Neural Networks and Opto-Electronics,

Auditorium Electrical Science Museum, Universiti Teknologi Malaysia, Jln. Semarak, July, 1991.

6. One day Seminar on Pressure Regulations, Petronas Dagangan, Faber Tower, Jalan Klang Lama, August 1991.

7. A Seminar on Energy Use in the Process Industries and Its Effect to the Environment, Bilik Jumaah, Universiti Teknologi Malaysia, Jln. Semarak, August, 1991.

8. A National Conference on Particle Technology and Separations, Bilik Jumaah UTM, Universiti Teknologi Malaysia, Jln. Semarak, August, 1991.

9. One day Course in Chemical Plant Commissioning, Bilik Jumaah UTM, August, 1991.

10. Three days Seminar on Flow Metering System, Organized by Delcom Services and Daniel Industries, Petronas, Menara Dayabumi, September, 1991.

11. First National Conference on Oil and Gas Fabrication Technology, Kuala Lumpur Pan Pasific, Organized by Offshore Structure Fabricators and Manufacturer (OSFAM), September, 1991.

12. A Seminar on Safety and Fire Fighting, Organized by Jabatan Perkhidmatan Bomba, Dewan Besar, Universiti Teknologi Malaysia, Jln. Semarak, October, 1991.

13. Optimum Learning Workshop, Organized by UTM Training Unit, Universiti Teknologi Malaysia, Jln. Semarak, November, 1991.

14. A Seminar on Biodeterioration of Middle Distillate Fuel, Organized by Faculty of Chemical and Natural Resources Engineering, UTM, Bilik Jumaah, Universiti Teknologi Malaysia, Jln. Semarak, January, 1992.

15. A Seminar on Laboratory Safety, Organized by Faculty of Chemical and Natural Resources Engineering, UTM, Auditorium Museum of Electrical Science, Universiti Teknologi Malaysia, Jln. Semarak, April, 1992.

16. A Seminar on Safety In Reticulation System at Pan Pacific, Kuala Lumpur, Organized by RMO Company, 22nd May, 1992.


______________________________________________________________________________


17. A Course in Microcomputer Interfacing for Process Control and Measurement, Jointly Organized by Faculty of Electrical Engineering and Faculty of Chemical and Natural Resources Engineering, UTM Jln. Semarak, 15th - 19th June, 1992.

18. A Course and Intensive Training of Biomedical Products and Specifications, 2 days, Organized by Bio-Tek Instruments Inc., Alphen Aan Der Rijn, The Netherlands, 25th - 26th September, 1992.

19. A Course and Hands-on Training in Pneumatic and Electro-Pneumatic System and Components, 2 days, Organized by FESTO Malaysia, Bangsar, 4th – 5th October, 1992.

20. A Seminar On Recent Laser Anemometry Studies in Both Single and Two Phase Flow, Bilik Jumaah UTM, Organized by The Institute of Coastal and Offshore Engineering, UTM, Universiti Teknologi Malaysia, Jln. Semarak, 8th October, 1992.

21. A Course and Hands-on Training in PE Pipe Jointing using Butt Fusion, Electrofusion and Product Specifications, 3 days, Organized by Delcom Services and UPONOR-UAC, Subang New Village, Shah Alam, 19th - 21st October, 1992.

22. An Intensive Training of The Process Control Software: PARAGON, Organized by Gas System Lab, Faculty of Chemical and Natural Resources Engineering, Electrical Science Museum, Universiti Teknologi Malaysia, Jln. Semarak, August, 1993.

23. A Motivation Course for Academic Staff, Organized by Faculty of Chemical and Natural Resources Engineering, Universiti Teknologi Malaysia, Tanjung Tuan Beach Resort, Port Dickson, 18th - 19th December, 1993.

24. 2nd. International Conference of Offshore Structure Fabricators and Manufacturers (OSFAM), Kuala Lumpur Pan Pacific, 23rd December, 1993.

25. A Seminar On Kent Meters, Organized by Kent Meters (M) Sdn. Bhd., Hotel Crown Princess, 12th January, 1994.

26. A Seminar On Paragon TNT - The New Automation Software Family from Intec Controls, Electrical Science Museum, Organized by Solution Engineering, UTM, Jln. Semarak, 24th January, 1994.

27. A Short Talk on Flow-Induced Vibration Problems In Oil and Gas Pipeline, Dewan Labuan, Bangunan Daya Bumi, Organised by Petronas Research and Scientific Services (PRSS), 17th February, 1994.

28. Seminar Penyelidikan FKKKSA 1994, Organized by The Faculty of Chemical and Natural Resources Engineering, UTM, Bilik Jumaah, 11th August, 1994.

29. Effective Supervision of Research Students 2/94, Bilik Jumaah UTM, Organized by The School of Post Graduate Studies, Universiti Teknologi Malaysia, Jln. Semarak, 15th August, 1994.

30. Bengkel Penerbitan DTP Bil 2/94, Jointly organized by DBP and UTM Publication Unit, Computer Centre, Universiti Teknologi Malaysia, Skudai, , 25th - 31st July, 1994.

31. A Technical Training and Industrial Visit of The Operation and Application of Gas Pressure Regulator at Bryan Donkin UK, Jointly Organized by Seligi Engineering and Bryan Donkin UK, Chesterfield, United Kingdom, 1st December - 12th December, 1994.

32. Pressure and Temperature Calibration Course and Hands-On Practice of PC106 and TC306 Beamex Equipment, by Precision Calibration System Sdn. Bhd., Faculty of Chemical and Natural Resources Engineering, 6th - 7th January, 1995.

33. A Course In Gas Industrial Utilization, Electrical Science Museum Auditorium, Organized by A Committee of Gas Industrial Training, Department of Polymer and Gas Engineering, Universiti Teknologi Malaysia, Jln. Semarak, 18th - 19th January, 1995.


______________________________________________________________________________


34. A Coure In Academic Publication, Tg. Bidara Beach Resort, Melaka, Organized by UTM Publisher and DBP, 3rd - 6th May, 1995..

35. Kursus Penulisan Modul, UNIPEN & HRD, Fakulti Pendidikan, Universiti Teknologi Malaysia, Skudai, 6th – 7th September,1999.

36. Kursus Dokumentasi Akreditasi Makmal, Panel Akreditasi Makmal UTM, Bilik Mesyuarat, Fakulti Kej. Kimia & Kej. Sumber Asli, Universiti Teknologi Malaysia, Skudai, 15th September, 1999.

37. Kursus Pengurusan Penasihatan Pelajar, UNIPEN & HRD, Bilik Gerakan, Bangunan Pentadbiran, Universiti Teknologi Malaysia, Skudai, 21st – 22nd September, 1999.

38. Forum On Trans-Asean Gas Pipeline & Power Grids, ASCOPE, Mandarin Oriental Hotel, Kuala Lumpur, 5th – 7th October, 1999.

39. Seminar Perundangan & Keselamatan Retikulasi Gas, MGA-UTM, Hotel MS Garden, Kuantan, 18th November, 1999.

40. One Day Seminar on Intellectual Property Awareness for University Staff, Research Management Centre (RMC), Dewan Jumaah, UTM Skudai, 3rd December, 1999.

41. Seminar Perundangan dan Keselamatan Retikulasi Gas, Pacific Sutera Habour, Kota Kinabalu, Sabah, 26 Jun 2000.

42. International Conference on Anvances in Strategic Technologies 2000, UKM Bangi Selangor, 15-17 August 2000.

43. GASEX 2000, Conference and Exhibition, Pattaya Thailand, 11-14 Sep. 2000. 44. 7th International Conference & Exhibition on Natural Gas Vehicles, Yokohama,

7-20 Sep. 2000. 45. Half Day Seminar on Introduction of Alternative Material for Gas Reticulation,

PWTC Kuala Lumpur, 2 Nov. 2002. 46. MGA Techncial Conference 2000, Shangri-La Hotel, Kuala Lumpur, 7-8 Nov.

2000. 47. “3rd International Colloqium on Fuel and Combustion Technology” at

Technische Akademie of Esslingen, Stuttgard German on 17-18 January 2001. 48. Research Methodology, 23 April – 24 Mei 2001, UTM. 49. Workshop on Intelectual Property, 17 Julai 2001, Dewan Jumaah, UTM. 50. Seminar on Perundangan dan Keselamatan Retikulasi Gas, 20 Ogos 2001,

Causarina Parkroyal Hotel, Ipoh Perak. 51. Seminar on Engine Testing System, 22 Ogos 2001, Universiti Islam

Antarabangsa, Gombak, Selangor. 52. Wokshop on “Compotational Fluid Dynamics”, 3 – 4 Sep. 2001, FKKKSA, UTM. 53. 1st International South East Asia Hydrocarbon Flow Measurement Workshop,

10-13 September 2001, Cyberjaya. 54. Intensive course on AUTOCAD, 6-7 Oktober 2001, FKKKSA, UTM. 55. E-Learning, 17 Oktober 2001, FKKKSA UTM. 56. Seminar dan Pameran Penyelidikan IPTA, 25 – 28 Oktober 2001, PWTC Kuala

Lumpur. 57. Bengkel Penerangan Indeks, Ensiklopedia Sains dan Teknologi, 30 Jan. 2002,

Sofitel Hotel, Senai. 58. Bengkel Penilaian Teknikal Proposal ‘EAR” IRPA RM8, Peringkat Pertama, 16

Feb. 2002, Loji Pandu Kejuruteraan Kimia, FKKKSA, UTM. 59. Bengkel Penilaian Teknikal Proposal ‘EAR” IRPA RM8, Peringkat Kedua, 27 Mac

2002, Puai Springs Golf Resort 60. Bengkel Indeks, Ensiklopedia Sains dan Teknologi, Jilid Kejuruteraan Sumber

Asli, 7 – 9 April 2002, Bayu Beach Resort, Port Dickson 61. Bengkel Sehari Pengenalan Industri Gas, 12 Mei 2002, Hotel Grand Cintinental,

Kuala Terengganu.


______________________________________________________________________________


62. Seminar Pembekalan Gas Ke Kompleks Komersil dan Perumahan, 10 Sep. 2002, PWTC Kuala Lumpur.

63. Bengkel MASTIC, 7 Jan. 2003, Dewan Sultan Iskandar, UTM. 64. Bengkel Teaching Portfolio, 20 Mei 2003, FKKKSA, UTM. 65. Ceramah Jaminan Kualiti, 26 Mei 2003, FKKKSA, UTM. 66. Bengkel Kualiti Akademik, Jabatan Kejuruteraan Gas, 23-24 Mei 2003, FKKKSA,

UTM 67. Lawatan Teknikal ke Gas Malaysia Sdn Bhd, Pasir Gudang, 7 Julai 2003, Gas

Malaysia Sdn Bhd, Pasir Gudang, Johor. 68. Bengkel Kecemerlangan Akademik, Jabatan Kejuruteraan Gas, 5-7 Sep. 2003,

Coris Paradise Hotel, Port Dickson. 69. Workshop on Pipe Cleaning Operations by Pneumatic Systems International Pty

Ltd at Gas System Laboratory, FKKKSA, UTM, 17 Feb. 2004 70. Product Training on Automatic Isoperibol Calorimeter (AICM), 21-24 March

2005. 71. Festo Didactic product Training on Pneumatics and electro-Pneumatics,

Makmal Sistem Gas, 29 – 30 Ogos 2005. 72. Festo Didactic product Training on Programmable Logic Controllers-FEC 34 with

IEC Standards, Makmal Sistem Gas, 14 – 15 Sep. 2005 73. Safety Awareness, Relevant Acts and Regulations for Natural Gas and LPG

Utilisation, Hyatt Regency, Johor Bahru 8 Sep. 2003. 74. Kusus Pengajaran menggunakan Teknologi, CTL, UTM, 5-6 Julai 2005 75. Developing Teaching in English Skill Workshop, Smart Classroom, FKKKSA, UTM,

11 April 2005. 76. Kursus Keselamatan tapak untuk Mendapatkan ‘Kad Hijau’, Smart classroom,

FKKKSA, UTM, 2 May 2006. 77. Program Pembangunan Insan HTRD UTM, cemarah oleh Yg. Bhg. Dato’ Dr.

Fadzilah Kamsah, Dewan Senat UTM, 23 Mei 2006 78. Program bicara Intelek, Dato’ Harussani Zakaria, Mufti Kerajaan Negeri Perak,

Dewan Senat, UTM, 24 Mei 2006. 79. English for Content Area Istructors, CTL, UTM, 2 -3 Ogos 2006 80. Probem Based Learning, CTL, UTM, Persada Johor, 5-6 Nov. 2006. 81. Bengkel Writing Course Outcomes for OBE, Smart Classroom, 24 April 2007. 82. Kursus Pengurusan Aset Universiti 18-19 Jun 2007. Goodhope Hotel, Skudai 83. Kursus E-Pembelajaran 2-21 Jun 2007, CICT, UTM, JB 84. Bengkel Pembangunan NOSS, CIDB untuk Gas Fitter, Hotel Corrande, KL, 10-14

Mei 2007 85. Bengkel Pembangunan NOSS, CIDB untuk Gas Fitter, Hotel Holiday Villa,

Subang, 6-10 sep. 2007 86. Bengkel bangunan GASTEG dengan Pengarah Kerja, 28 Jan 08, Alumni, UTM 87. Bengkel Pembangunan COS (Gas Fitter), CIDB untuk Gas Fitter Hotel Crown

Crystal, 24 – 28 Jan. 2008. 88. Program pembangunan Insan, HRD, UTM, Peranan Intelek Islam, Dewan Senat,

UTM, 27 March. 2008. 89. Program pembangunan Insan, HRD, UTM, kenertanggungjawaban Penjawat

Awam bagi Menjamin Tadbir Urus Terbaik dalam mempertahankan Etika Perkhidmatan, Masjid Sultan Ismail, UTM, 07 Mei. 2008.

90. Bengkel Pembangunan Modul (Gas Fitter) , CIDB untuk Gas Fitter, Anchasa Hotel 27-30 Jun 2008

91. Seminar Penasihatan Akademik, Dewan Senar, UTM, 3 Julai 2008 92. Seminar Setengah hari Industri gas, Smart Classroom, FKKKSA, UTM, 27 Ogos.

2008 93. One Day Course on safety of NGV Storage, Tractor Malaysia, Puchong Selangor,

27 Nov. 2008


______________________________________________________________________________


94. Bengkel Pembangunan Modul (Gas Fitter), CIDB untuk Gas Fitter, Charto Holiday Hotel, Shah Alam 26 Feb – 2 Mac 2009.

95. Kursus Penasihatan Akademik, Rumah Alumni, UTM, 14-15 Disember 2010 96. Index Journal Publication Workshop, Dewan Bankuet UTM, 2-3 Febuari 2010 97. Bengkel Scenario Planning, FKKKSA, 4-7 March 2011, Pulai Desaru Beach Resort 98. Kursus Pembangunan Blog Pengajaran & Pembelajaran, 5 April 2011, CTL, UTM 99. Bengkel Kemahiran Insaniag FPREE, The Zones All Suites Residences, Kuala

Lumpur, 6-8 April 2012 100. Journal Publication Seminar 2012, CTL UTM, 15th May 2012 101. International Cenference on Biomass for Biofuel and Value-Added Products,

Double Tree by Hilton, KL, 23-24 October 2012 102. National Energy Forum, Sheraton Umperial Hotel, 27 September 2012 103. Introduction to Workbench of CFD Module, GASTEG UTM, 16 November 2012 104. Half Day Workshop on CRR, 21 Jan. 2012, CTL, UTM 105. Bdngkel Penggubalan Soalan NOSS, Gas Fitter, Vivatel Hotel KL, 15-18 Feb.

2013. 105. Bengkel Program Baru, Ramada Hotel Melaka, 22-24 Feb. 2013 106. Seminar keselamatan dan Pembekalan Gas, Sultan Ahmad Shah International

Convention Centre, Kuantan Pahang, 29 Mei, 2014. 107. Bengkel Pemusatan Pemasaran Kursus Kompeten anjuran UTM-MPRC Institute

for Oil and Gas, 22-23 Jun 2014, UTM-MPRC IFOG, Skudai Johor.