GEDORE presents extended range of flaring tools and manual pipe benders

GEDORE is extending its Mixx & Click range to include eight new sets with flaring tools and manual pipe benders.

Remscheid – The new comprehensive Mixx & Click range for many

applications in the area of sanitary/heating/AC as well as automotive

comprises eight different sets with flaring tools and manual pipe benders for

pipes made of various materials and featuring various strengths and

diameters:

The boerdex 1101-2333 flaring tool set for cooling systems and

refrigeration technology is available in five different compilations for

flaring copper and light-alloy pipes of various material hardnesses

and diameters.

Each of the sets includes a flaring tool made of pressure-cast zinc,

steel-clamping jaws, a cone and a 3-35 mm pipe cutter supplied in a

GEDORE i-BOXX® 72.

The 1101-2340 double flaring tool set is recommended for standard

precision flares to DIN 74234 on brake lines, hydraulic pipes or

similar with a wall strength of 0.7 to 1.0 mm. It is available in two

variants for metric pipes as well as for metric and imperial pipes.

Equipment includes a basic frame made of malleable cast iron, steel

clamping jaws, a 4-32 mm deburring reamer and an ultra-small 4-16

mm pipe cutter supplied in a GEDORE i-BOXX® 72.

Thanks to its freely selectable initial bending ange, the 1100-2431 manual bending tool set facilitates bending soft copper pipes to EN

1037 – even if they feature a fixed jacket – and thin-walled precision

steel pipes and pipes made of NE metals. The scope of supply also

includes a long ½” reversible ratchet for even easier bending. The set

in the GEDORE L-BOXX® 136 comprises a bending lever, five

bending formers to 90 degrees for pipes with diameters of 6 to 15 mm

and a pipe cutter for diameters of 3 to 35 mm.

The 1101-2785 manual bending tool set is suitable for precision

steel pipes to EN 1035-3/DIN 2394, hydraulic pipes to EN 1035-1/DIN

2391 with wall strengths of 0.75 to 1.0 mm and bendable stainless

steel pipes with wall strengths of 1.0 mm. In the GEDORE i-BOXX®

72, it is now supplied with five instead of four bending formers to 180

degrees made of high-strength aluminium for pipes with diameters of

3 to 10 mm, a pipe cutter for 4 to 16 mm and a deburring reamer for 8

to 35 mm stainless steel pipes.

The 1100-2786 manual bending tool set is suitable for precision

steel pipes to EN 10305-3/DIN 2394, hydraulic pipes with wall

strengths of 1.0 to 2.0 mm, multi-layer composite pipes to 16 mm and

bendable stainless steel pipes with wall strengths of 1.0 to 1.5 mm.

Apart from the basic body, the GEDORE L-BOXX® 136 also includes

eight instead of six bending formers to 180 degrees for pipes with

diameters of 6 to 18 mm, a pipe cutter for 3 to 35 mm and a 3 mm pin

punch. The pipe bender can be clamped in a parallel vice or used

stationarily with an optional tripod no. 268500.

The 1100-2788 manual bending tool set in the L-BOXX® 136

combines the working ranges offered by 1101-2785 and 1101-2786 in

a single device. It bends precision steel pipes to EN 10305-3/DIN

2394, hydraulic pipes with wall strengths of 0.75 to 2.0 mm, multi-

layer composite pipes to 16 mm and bendable stainless steel pipes

with wall strengths of 1.0 to 1.5 mm. The L-BOXX® contains a ½”

reversible ratchet, ten bending formers for pipes (3-4, 5, 6, 8, 10, 12,

14, 15, 16, 18 mm), a pipe cutter for 3 to 35 mm and a 3 mm pin

punch. Up to pipe diameters of 10 mm, the pipe bender can be

clamped into a parallel vice or used as bending pliers; as of 12 mm, it

can also be used stationarily with an optional tripod no. 268500.

The 1100-245680 bending tool set features a hydraulic drive.

Accordingly, less force is required when bending soft or heat-

insulated copper pipes to EN 1037 with diameters of up to 22 mm,

multi-layer composite pipes to 20 mm or precision steel pipes with a

wall thickness of 18 x 1.5 mm. In the GEDORE L-BOXX® 136, the

bending device is supplied with seven bending formers for pipes with

diameters of 10 to 22 mm, the corresponding counter-supports, a

pipe cutter and a deburring reamer.

The 1100-245681 bending tool set avails of a reinforced hydraulic

drive and is suitable for soft or heat-insulated copper pipes to EN

1037 with diameters of up to 22 mm, multi-layer composite pipes to

20 mm, precision steel pipes with a wall thickness of 18 x 1.5 mm and

for annealed 18 x 1.2 mm stainless steel pipes. The GEDORE L-

BOXX® 136 also includes ten bending formers for pipes with

diameters of 6 to 22 mm, the corresponding counter-supports and a

3-35 mm pipe cutter.

GEDORE boerdex tool set for flaring copper and light alloy pipes.

About GEDORE

GEDORE is one of the world's leading brands for premium tools. The fam-ily company has been manufacturing high-quality tools since 1919. With more than 16,000 products, GEDORE offers the widest range of any European tool manufacturer. All over the world, GEDORE stands for high quality, innovative strength, high performance and reliability as well as optimum service.

The internationally successful company based in Remscheid employs more than 2,500 people at its five German sites as well as production fa-cilities in Brazil, England, Austria and South Africa. GEDORE is represented in more than 70 countries throughout the world. The GEDORE Group also includes the carolus brand which stands for sound tools offering quality assurance “by GEDORE” and the premium OCHSENKOPF brand – a tradi-tional specialist in excellent forestry tools.

www.gedore.de

Should you require any further information, please do not hesitate to contact us at any time.rheinfaktorAgentur für Kommunikation GmbHUlrich EschZollstockgürtel 5750969 KölnTel.: +49 221 88046-180gedore@rheinfaktor.de

Reprints free, copy of publication requested