DDM Resources for CVTE: Appendix D-3:CVTE … · Web view2.B Fundamentals of Electronics Circuits Assembly 2.G Applied Engineering 2.H Software Applications 2.I Applied Electronic

Suggested Core Content Standards

Identified by CVTE Educators from theMA Vocational Technical Education Framework

to Support the Development ofDistrict-Determined Measures

January 15, 2014 Sturbridge, MA

Note on Use of this Resource

This document is provided as a resource for CVTE educators and leaders to support the alignment of District-Determined Measures to critical content standards in each of 27 CVTE programs. The following standards were identified by teams of CVTE educators from across the Commonwealth during an ESE-sponsored meeting in Sturbridge, Massachusetts on January 15, 2014. The standards provide a starting point for school and district discussions about whether District-Determined Measures address the two central questions set forth by the Massachusetts Department of Elementary and Secondary Education (ESE):

1. Is the measure aligned to critical content?2. Is the measure informative?

See ESE Technical Guide B: Measuring Student Growth and Piloting District-Determined Measures, available at http://www.doe.mass.edu/edeval/ddm/TechnicalGuideB.pdf, for further description.

Contents

Automotive Collision Repair & Refinishing (VCOLL).................................................................................1

Automotive Technology (VAUTO)......................................................................................................................2

Biotechnology (VBIOT)........................................................................................................................................... 3

Business Technology (VBUS)............................................................................................................................... 4

Carpentry (VCARP)................................................................................................................................................... 5

Cosmetology (VCOSM)............................................................................................................................................ 6

Criminal Justice (VCRIMJ)...................................................................................................................................... 7

Culinary Arts (VCUL)................................................................................................................................................8

Dental Assisting (VDENTL)................................................................................................................................... 9

Design & Visual Communications (VDVC)...................................................................................................10

Drafting (VDRAF).................................................................................................................................................... 11

Early Education and Care (VEEC)....................................................................................................................12

Electricity (VELEC).................................................................................................................................................13

Electronics (VETRON).......................................................................................................................................... 14

Engineering Technology (VENGR)..................................................................................................................15

Environmental Science and Technology (VENVR)...................................................................................16

Health Assisting (VHEAL)................................................................................................................................... 17

Horticulture (VHORT)...........................................................................................................................................18

Hospitality Management (VHOSP)..................................................................................................................19

Heating, Ventilation, Air Conditioning & Refrigeration (HVAC)........................................................20

Information Support Services & Networking (VISSN)...........................................................................21

Machine Tool Technology (VMACH).............................................................................................................. 22

Marketing (VMARK).............................................................................................................................................. 23

Medical Assisting (VMED)...................................................................................................................................24

Metal Fabrication & Joining Technologies (VMETL)...............................................................................25

Plumbing (VPLUM)................................................................................................................................................ 26

Programming & Web Development (VPROG)............................................................................................27

Automotive Collision Repair & Refinishing (VCOLL)

Transportation Occupational Cluster

CIP Code 470603

Strand 2: Technical Knowledge and Skills

Auto Collision Repair & Refinishing

2.H.03 Repair exterior panel cosmetic repair

2.H.02 Develop and execute a repair plan

2.K.01 Mix and apply undercoat per paint manufacturer

2.L.05 Detail interior , exterior, body opening and glass

2.K.06 Identify, diagnose repair paint problems.

2.L.01 Final detail

2.l.02 Remove buffing imperfections

1.A.02 Demonstrate health and safety practices

2.A.05 Safety operations for refinishing

2.K.05 Overall panel refinishing

1

Automotive Technology (VAUTO)

Transportation Occupational Cluster

CIP Code 470604


Automotive Technology

2.A.01 Identify a describe safety procedures

2.E.01 Identify and demonstrate the use of commonly used threaded fasteners.

2.A.03 Identify and describe safety procedures when dealing with electrical circuits according

2.F.01 Access and use service information to perform step-to-step diagnosis and repair.

2.G.01 Conduct appropriate wheel and tire inspection.

2.G.02 Conduct appropriate wheel and tire mounting.

2.H.02 Lubricate suspension and steering systems.

2.I.01 Identify and diagnose power steering concerns and perform necessary service.

2.I.02 Identify and diagnose mechanical steering concerns and perform necessary service.

2.K.01 Perform appropriate basic maintenance service skills.

2.N.01 Diagnose and identify pressure concerns in the brake system using hydraulic principles (Pascal’s Law).

2.P.01 Remove and inspect brake caliper assembly; determine necessary action.

2.U.01 Identify, maintain and service the various types of commonly used automotive batteries.

2.V.01 Diagnose and repair starting systems.

2.W.01 Diagnose and repair charging systems.

2

Biotechnology (VBIOT)

Manufacturing, Engineering & Technology Services Occupational Cluster

CIP Code 150401


Biotechnology

2.B.01 Demonstrate knowledge of biotechnology industry fundamentals

1.A.01 Define health and safety regulations

1.A.02 Demonstrate health and safety practices

2.A.03 Follow safety and emergency procedures according to OSHA standards.

2.B.03 Demonstrate basic lab management skills

2.C.01 Demonstrate and apply manufacturing process management techniques

2.E.01 Metrology: Use measurement instrumentation

2.F.01 Perform aseptic techniques.

2.F.02 Maintain microorganisms

2.F.03 Transform cells.

2.F.04 Maintain animal cells in tissue culture.

2.E.02 Use microscopes

2.E.03 Perform standard lab assays/techniques.

2.E.04 Perform separation techniques.

2.D.02 Prepare solutions

3

Business Technology (VBUS)

Business & Consumer Services Occupational Cluster

CIP Code 520407


Business / Office Technology

2.B.03 Demonstrate an understanding of technological skills and practices.

2.B.03.01 Apply keyboarding techniques according to current industry standards.

2.F.01 Demonstrate an understanding of developing and sending electronic mail.

2.F.02 Utilize advanced electronic mail and communication features.

2.G.01 Plan, create, edit, and manage a social media site.

2.G.02 Plan, create, edit, and manage a website.

2.I.01 Create, edit, format and print a spreadsheet.

2.I.02 Insert elements and other items into a spreadsheet.

2.J.01 Create, edit, format and print a document.

2.J.02 Insert elements into a document.

2.J.03 Utilize advanced document processing features.

2.K.01 Create, edit, format and print a presentation.

2.K.02 Insert elements and other items into a presentation.

2.E.01 Demonstrate an understanding of financial concepts and applications.

2.D.01 Analyze and complete the accounting cycle for a service business.

2.C.03 Demonstrate an understanding of marketing a business.

4

Carpentry (VCARP)

Construction Occupational Cluster

CIP Code 460201


Carpentry

2.A.01 Successfully complete safety training on all related equipment and materials.

2.B.03 Determine true measurements from prints.

2.D.07 Check installed items for square, plumb, and level.

2.B.06 Apply state and local building codes.

2.D.04 Apply carpentry math principles.

2.D.05 Describe layout procedures.

2.H.01 Describe and apply the factors in the construction of floor framing systems.

2.H.02 Demonstrate practices related to framing exterior walls.

2.H.03 Demonstrate practices related to framing interior walls.

2.H.04 Demonstrate practices related to framing ceilings and roofs.

2.I.01 Demonstrate practices related to exterior finish.

2.I.02 Demonstrate practice related to interior finish.

2.D.01 Recognize and describe the use of building materials.

5

Cosmetology (VCOSM)


CIP Code 120401


Cosmetology

2.A.02 Identify and differentiate between the three levels of decontamination according to current industry and OSHA standards

2.B.03 Meet the client's expectations

2.D.03.02 Explain the importance of both personal and professional contact

2.E.01 Demonstrate proper shampooing and conditioning procedures

2.F.01.05 Determine base to achieve proper volume

2.M.01 Perform professional nail services

2.N.02.03 Explain and demonstrate the importance of neat, uniform partings, sections, an subsections.

2.N.03.03 Explain and describe how different elevations and over-direction determine different results

2.0.03.03 Explain the principles of color theory for formulation

2.P.01.07 Demonstrate various wrapping procedures: straight wrap, double tool wrap (i.e. piggyback, bookend, and spiral wrap)

2.P & 2.Q Perform a professional chemical retexturizing service

6

Criminal Justice (VCRIMJ)

Legal & Protective Services Occupational Cluster

CIP Code 43.0107


Criminal Justice

2.B.01 The Trial Court System and Constitutional and Criminal Law

2.B.02 Describe criminal procedure and trial procedure.

2.B.03 Describe the fundamentals of constitutional law.

2.B.04 Apply Trial Procedures.

2.B.05 Analyze elements of civil infractions and criminal law.

2.C.02 Explain and demonstrate procedures used in investigating and processing crime scenes.

2.A Criminal Justice and Safety Skills

7

Culinary Arts (VCUL)

Hospitality & Tourism Occupational Cluster

CIP Code 520901


Culinary Arts

2.A.0.1.Demonstrate proper food safety and sanitation

2.C.01 Demonstrate Dining Room Operations2.C.01.01

2.D.01. Demonstrate Utility Service

2.F.01. Describe and Demonstrate cooking methods

2.F.12 Prepare Baked Goods

8

Dental Assisting (VDENTL)

Health Services Occupational Cluster

CIP Code 510601


Dental Assisting

2.A.01 Apply patient and dental healthcare worker safety education

2.C.01 Apply knowledge of tooth morphology, Dental and Head and Neck Anatomy

2.D.01 Demonstrate client/patient identification

2.E.01 Prepare the operatory for patient treatment

2.F.01 Explain the properties of dental materials

2.G.01 Prepare armamentarium and manipulate dental materials for restorative procedures

2.1.01 Select and prepare armamentarium and dental materials for preventive procedures

2.J.01 Apply the principles of radiation protection, health physics and hazards in the operation of radiographic equipment

2.K.01 List the characteristic properties of x-ray beam and ionizing radiation

2.L.02 Demonstrate professional behavior in clinical practice

2.A.02 Apply universal precautions

2. A. 04 Perform sterilization procedures

2.A.05 Demonstrate environmental asepsis

2.A.03 Maintain aseptic conditions

2.A.06.01 Follow regulations described in OSHA Blood-borne Pathogens Standard

9

Design & Visual Communications (VDVC)

Arts & Communication Services Occupational Cluster

CIP Code 500401


Design & Visual Communications

2.B Fundamentals of Design2.B.01 Describe and apply the elements of design2.B.02 Describe and apply the principles of design2.B.03 Demonstrate an understanding of typography2.B.04 Demonstrate and apply an understanding of color theory

2.C The Creative Process2.C01 Employ Design Strategies2.C02 Apply Concept Development2.C03 Employ Design Execution/Production practices2.C04 Demonstrate presentation skills

2.D Content Creation Skills2.D01 Demonstrate Illustration Skills2.D04 Demonstrate Photography skills2.D05 Demonstrate Page Layout skills

2.E Career & Portfolio Development2.E01 Develop & prepare a body of work2.E.02 Present Portfolio

4.A Employability Knowledge and skills

5A Management and Entrepreneurship Knowledge & Skills

10

Drafting (VDRAF)


CIP Code 151301


Drafting

2.B.03 - Apply the design process

2.C.02 - Apply dimensioning

2.D.02 - Produce CAD drawing

2.D.02.04 - Create 3D Models

2.E.04 - Produce Mechanical Drawings

2.F.02 - Draw construction Drawings (Architectural)

11

Early Education and Care (VEEC)

Education Occupational Cluster

CIP Code 131210


Early Education and Care

2.A Safety Practices and the Learning Environment

2.B Growth Development and Curriculum

2.C Behavior Management

2.D Relationships with Families

2.E Assessment Techniques

2.F Professional Knowledge

12

Electricity (VELEC)


CIP Code 460302


Electricity

2.A.01 Describe and demonstrate safety techniques and methods with tools & shop procedure.

2.F.01 Explain the purpose and history of NEC and The MEC amendments.

2.D.01 Explain basic concepts of AC/DC Electrical theory

2.D.02 Define Voltage and identify ways in which it can be produced.

2.B.01 Read and Interpret Prints.

2.H.01 Installation of Conductors

2.H.02 Perform conductor terminations.

2.K.01 Fundamentals of grounding and bonding.

2.G.01 Installation of raceways and fittings

2.I.01 Install Electrical Service

13

Electronics (VETRON)


CIP Code 150303


Electronics

2.F Theory and Application of Digital Electronics

2A Safety in the Electronics Laboratory

2.C Theory and Application of DC

2.D Theory and Application of AC

2E Theory and Application of Analog Electronics

2.B Fundamentals of Electronics Circuits Assembly

2.G Applied Engineering

2.H Software Applications

2.I Applied Electronic Devices in a Manufacturing Environment

2.J Advanced Standards

14

Engineering Technology (VENGR)


CIP Code 150000


Engineering Technology

2.B Engineering – Introductory Knowledge and Skills*Sub-objectives guide what teachers should use to determine student growth via COPS evaluations.2.B.01 Demonstrate and apply the design process.

2.C Electrical Engineering Demonstration, Design, and Implementation*Sub-objectives guide what teachers should use to determine student growth via COPS evaluations.2.C.03 Build and implement electrical engineering circuits.

2.D Mechanical Engineering Demonstration, Design, and Implementation.*Sub-objectives guide what teachers should use to determine student growth via COPS evaluations.2.D.03 Build and implement mechanical engineering designs.

2.E Automated Systems Engineering Demonstration, Design, and Implementation*Sub-objectives guide what teachers should use to determine student growth via COPS evaluations.2.E.02 Apply automated systems engineering design tools, techniques, and materials.

2.F Civil Engineering/Architecture Demonstration, Design, and Implementation*Sub-objectives guide what teachers should use to determine student growth via COPS evaluations.2.F.02 Apply civil engineering/architecture design tools, techniques, and materials.

2.G* Third Year Engineering Integrated Area Research Design, Implementation and Maintenance*Sub-objectives guide what teachers should use to determine student growth via COPS evaluations.

15

Environmental Science and Technology (VENVR)

Agriculture and Natural Resources Occupational Cluster

CIP Code 151507


Environmental Sciences & Technology

2.G Energy technologies and sustainability2.G.01 Measure energy efficiency and explain is role in reducing air, water, and soil pollution.

2.H Environmental Site Management 2.H.01 Demonstrate practices related to hazardous-waste site assessment and remediation.

2.L Environmental Sampling & Laboratory Services 2.L.01 Conduct environmental field sampling.

2.N Wildlife & Fisheries Biology 2.N.01 Demonstrate techniques related to wildlife management.

2.I Applied Water Technologies 2.I.01 Demonstrate practices related to Municipal Wastewater Treatment.

2.B Environmental Systems 2.B.01 Explain concepts fundamental to Environmental Systems and society.

2.C.03 Demonstrate practices fundamental to Soil Science. 2.C.03.01 Identify basic soil particle sizes (e.g. sand, silt, clay, loam).

2.K Conservation Policy and Public Outreach 2.K.01* Demonstrate an understanding of research principles.

16

Health Assisting (VHEAL)


CIP Code 510000


Health Assisting

2.A.01 Demonstrate health and safety practices following professional medical protocols and OSHA standards

2.A.03 Obtain Healthcare Provider CPR

2.B.01 Summarize the fundamentals of the healthcare industry

2.C.01 Responding to Clients Needs

2.C.02 Assist the client in the activities of daily living

2.C.03 Assist, perform, and document skills related to elimination

2.C.04 Demonstrate the performance of special procedures

2.C.05 Demonstrate the administration of comfort measures

2.C.06 Assist a client with nutrition and hydration

2.C.07 Assist client with cognitive or memory impairments

2.D.01 Demonstrate knowledge of principles of growth and development

2.E.01 Complete Certification/Specialty Programs of at least 280 hours of instructional time.

1.A.02.05 Demonstrate appropriate safe body mechanics, including proper lifting techniques and ergonomics

17

Horticulture (VHORT)

Agriculture and Natural Resources Occupational Cluster

CIP Code 01060


Horticulture

2.B.01 Use Plant Classification principles to identify a wide variety of plants

2.B.03 Demonstrate an understanding of plant anatomy

2.B.04 Apply principles of plant physiology and metabolism to plant growth

2.B.05 Distinguish between sexual and asexual reproduction of plants

2.C.01 Demonstrate an understanding of principles of entomology

2.C.04 Describe the components and benefits of a quality plant health care plan

2.D.02 Evaluate physical properties of the soil in relation to soil characteristics

2.D.05 Apply soil testing processes and techniques to determine soil health

18

Hospitality Management (VHOSP)

Hospitality & Tourism Occupational Cluster

CIP Code 520901


Hospitality Management

2.A.06.02Practice work habits that provide personal safety, safety for others, and protect the safety and security of the external environment

2.A.06.04Maintain a sanitary and clutter-free work environment, following appropriate procedures in the hospitality and tourism industry

2A.06.07Demonstrate the proper use of a sanitizing solution, utilizing a test kit to assure safe and effective concentration levels

2C.01.06Recite and demonstrate key components of good communication skills

2.E.02.02Assemble and maintain restaurant workstations for dining room service

2E.02.13Clean and Sanitize work areas and stationary equipment

2.E.01.01Define terminology used in food & beverage service

2.G.01Classify types of lodging businesses by category

2.B.01Describe the components of the Hospitality and Tourism Industry

19

Heating, Ventilation, Air Conditioning & Refrigeration (HVAC)


CIP Code 470201


HVAC / R

2.A.01 Use tools and handle materials safely, in accordance with industry regulations and established shop procedures.

2.A.02 Demonstrate safety in refrigerant handling following Environment Protection Agency (EPA) regulations.

2.C.01 Describe HVAC&R principles, regulations and career opportunities.

2.D.01 Demonstrate piping practices.

2.E.01 Demonstrate wiring HVAC&R controls, motors, and circuits.

2.F.01 Troubleshoot and install refrigeration components.

2.G.01 Install and troubleshoot air- conditioning & heat pump equipment.

2.I.01 Install and troubleshoot gas heating equipment.

20

Information Support Services & Networking (VISSN)

Information Technology Services Occupational Cluster

CIP Code 110401


Information Support Services / Networking

2.F.02 Install and configure operating systems using the most appropriate method

2.G.02 Compare and contrast common security threats

2.I.03 Explain the purpose and properties of IP addressing

2.J.02 Identify components of wiring distribution and management

2.K.01 Install and configure network operating systems

2.M.01 Explain the troubleshooting theory

2.M.02 Troubleshoot common problems related to motherboards, RAM, CPU and power with the appropriate tools.

2.C.08 Develop customer specification and needs

2.F.04 Perform preventative maintenance procedures using appropriate tools

2.I.04 Explain DHCP concepts, describe it's components and configure DHCP servers

2.I.05 Explain DNS concepts, describe it's components and install DNS servers

2.A.03 Practice proper communications and professionalism

2.L.01 Identify components of network management

21

Machine Tool Technology (VMACH)


CIP Code 480501


Machine Tool Technology

2.A.01 - Fundamentals of Safety - ALL

2.G.01 - Blueprints - ALL

2.I.01 - Machining Operations - ALL

2.M.01 - Lathe Process/Practice Precision Turning - ALL

2.N.01 - Milling Process/Use Precision Milling - ALL

2.O.01 - CNC Programming/Demonstrate and apply the Computer Aided Design (CAD) and Computer Aided Manufacturing (CAM) process.

2.P.01 - CNC Operations/Operate CNC and Conversational Machines

22

Marketing (VMARK)


CIP Code 190203


Marketing

2.B.01 Develop product/service knowledgeAssessments should allow students opportunities to demonstrate an understanding of the importance of attaining and communicating product/service knowledge in the overall sales and marketing process

2.B.02 Assess customer needsAssessments should allow students to demonstrate various techniques and use of tools designed to ascertain information about customer wants and needs

2.C.01 Fundamentals of MarketingAssessments should measure student understanding of the role of marketing in a free enterprise system

2.D Financial AnalysisAssessments should allow students to demonstrate knowledge and understanding of financial management concepts and procedures

2.E Business OperationsAssessments should measure and reflect student ability to manage time, workflow and resources

2.F SellingAssessments should demonstrate student knowledge of the sales function to optimize sales percentages and volumes

2.G.01 Demonstrate knowledge of channel managementAssessments should measure student understanding in the role of channel management in marketing and management

2.H Demonstrate an understanding of the role of promotion and types of promotion to be used in a variety of business situations

2.1.01 Demonstrate foundation knowledge of marketing information managementAssessments should measure student understanding of purposes, methods and uses of marketing information management

2.J.01 Explain role of business in a free enterprise systemAssessments should measure student understanding of the fundamentals of a free enterprise economy and the role of entrepreneurs as compared to various economic models

2.L .01 Develop foundation knowledge of pricing in marketingAssessment should measure student ability to develop and utilize a variety of pricing strategies

2.M.01 Demonstrate foundational knowledge of product/service managementAssessments should measure student understanding of the stages of the product life cycle and the steps in product planning

2N.01 apply effective skills in all domains of communication Assessments should allow students to demonstrate at least one measure of effectiveness in written, verbal or listening skills using a variety of communication tools in a variety of business

23

Marketing

settings

Medical Assisting (VMED)


CIP Code 510801


Medical Assisting

2.A.01 Demonstrate health and safety practices.

2.B.02 Demonstrate professional behavior in clinical practice

2.C.01 Demonstrate verbal and non verbal communication

2.F.01 Perform medical asepsis

2.G.01 List strategies used to obtain the patient's symptoms

2.G.02 Obtain Cardiopulmonary Resuscitation (CPR) certification from the American Heart Association

2.H.02 Assist with physical exam

2.H.03 Provide patient education

2.M.05 Describe basic elements of a prescription

2.C.02 Collect a medical history

2.C.03 Demonstrate how to respond to patient's needs

24

Metal Fabrication & Joining Technologies (VMETL)


CIP Code 480599


Metal Fabrication and Joining

2.J.02 SMAW process Note. Each of these welding processes require performance assessments by student demonstration of padding on 1/4 "plate in all positions to an entry level industry standard prior to certification and or graduation.

2.2.J.03 GMAW processNote. Each of these welding processes require performance assessment by student demonstration of padding on 1/4 plate and also requires visual inspection of each plate within each welding process. Checking for welding defects.

2.J05 GTAW process Note. Each of these welding processes require performance assessment by student demonstration of padding on 1/4 plate and also requires visual inspection of each plate within each welding process. Checking for welding defects.

2.J.04 FCAWNote. Each of these welding processes require performance assessment by student demonstration of padding on 1/4 plate and also requires visual inspection of each plate within each welding process. Checking for welding defects.

2.G.01 Mechanical Cutting Operations

2.H.01 Forming Metals

2.I.02 Plasma Cutting

2.F.01 Hand and power tools

25

Plumbing (VPLUM)


CIP Code 460503


Plumbing

2.A.01 Define and demonstrate safety techniques and methods with tools and shop procedures.

2.D.01 Demonstrate techniques in measuring, cutting, and joining steel pipe and fittings.

2.D.02 Demonstrate techniques in measuring, cutting, and joining copper pipe and fittings.

2.D.03 Demonstrate techniques in measuring, cutting, and joining cast iron pipe and fittings.

2.D.04 Demonstrate techniques in measuring, cutting, and joining plastic pipe and fittings.

2.D.05 Demonstrate techniques in measuring, cutting, and joining CSST (Corrugated Stainless Steel Tubing) and fittings.

2.E.01 Identify, define and demonstrate the features and the regulations relating to water supplies.

2.F.01 Install drainage, waste and vent piping systems.

2.F.02 Define and demonstrate the fundamentals of venting a plumbing system.

2.I.01 Demonstrate techniques in sizing and installing fuel gas systems.

2.G.01 Demonstrate techniques in selecting and installing plumbing fixtures.

2.H.01 Demonstrate techniques in servicing a plumbing system.

2.F.03 Demonstrate techniques in sizing and installing roof and area drains.

2.B.01 Read and interpret prints.

2. C.01 Describe the fundamentals of the plumbing industry.

26

Programming & Web Development (VPROG)

Information Technology Services Occupational Cluster

CIP Code 110201


Programming & Web

2.A.07 Explain concepts fundamental to databases.

2.B.01 Demonstrate problem solving and troubleshooting techniques.

2.B.02 Determine software requirements

2.B.03 Create software design.

2.B.05 Perform software testing.

2.B.06 Create user software documentation.

2.C.01 Implement concepts fundamental to programming

2.C.02 Demonstrate fundamentals of Object Orientated (OO) Programming.

2.C.03 Construct a program

2.D.01 Demonstrate fundamentals of Hypertext Markup Language (HTML).

2.D.02 Demonstrate fundamentals of cascading style sheets (CSS).

2.D.03 Demonstrate fundamentals of JavaScript.

2.D.04 Construct a website

27

Documents

DDM Resources for CVTE: Appendix D-3:CVTE … · Web view2.B Fundamentals of Electronics Circuits Assembly 2.G Applied Engineering 2.H Software Applications 2.I Applied Electronic