dCS Scarlatti Menu Guide The STEP > button moves along the menu, the STEP < button moves back. MENU Press the MENU button to set a menu option or change options. Information Version Contact Unit information CDUpdate Transport Settings Layer PCM Enable Easy Play Vivaldi Mode Factory Reset Displays the software issues & serial number. Displays dCS contact details. Displays the unit status. Loads new software from a dCS CD. Selects the format for playing hybrid discs (CD/SACD). Turns the PCM outputs on/off. Sets the mode of the automatic input switching Sets the AES outputs to Dual AES DSD mode. Restores standard factory settings. Settings The Settings Menu for each model is detailed on the right. DAC Settings Phase De-Emph Dual AES Analogue Out Channel Swap Balance Factory Reset Changes the output phase for Sets the DeEmphasis curve (32 Enables Dual AES operation Sets the analogue output Reverse the Left and Right Allows Balance adjustment by Restores standard factory both channels. curve (32 - 48kS/s) AES operation levels outputs rotary control settings. STT SDC & SUP & SCP Display Settings Brightness Contrast Test Display Display LEDs Off Clock Settings Coupling Lock USB Class Factory Reset LEDs Off Sets the display brightness. Adjusts the display contrast. Runs a display test routine Turns the main display on/off. Turns the indicators Off/On. Sets the External Input to detect TTL or AC. Locks the Frequency settings. Selects USB Class 1 (24/96) or Class 2 (24/192) Restores standard factory settings. Signal Generator Channel Check Phase Check Burn In Upsampler Settings Filter Sync Source Clone Dual AES Factory Reset DAC & Transport ONLY Outputs tone on L channel only then R channel only. Noise on both channels then inverts R. Outputs modulated pink noise to burn-in your system. Selects an optional filter if available Sets the clock source for the selected input. Allows bit-for-bit operation if Fs In = Fs Out Enables Dual AES operation Restores standard factory settings. Scarlatti Guide English March 2013

dCS Scarlatti Menu Guide - dcsltd.a.cdnify.io · dCS Scarlatti Menu Guide The STEP > button moves along the menu, the STEP < button moves back. MENU Press the MENU button to

Download PDF Report

Upload
builiem
View
217
Download
0

Embed Size (px)

Citation preview

dCS Scarlatti Menu Guide

The STEP > button moves along the menu, the STEP < button moves back.MENU Press the MENU button to set a menu option or change options.

Information Version Contact Unit information CDUpdate Transport

Settings Layer PCM Enable Easy Play Vivaldi Mode Factory Reset

Displays the software issues

& serial number.

Displays dCS contact details.

Displays the unit status.

Loads new software from a

dCS CD.

Selects the format for

playing hybrid discs

(CD/SACD).

Turns the PCM outputs on/off.

Sets the mode of the automatic input switching

Sets the AES outputs to Dual

AES DSD mode.

Restores standard factory

settings.

Settings The Settings Menu for each model is detailed on the right. DAC Settings Phase De-Emph Dual AES Analogue Out Channel Swap Balance Factory Reset

Changes the output phase for

Sets the DeEmphasis curve (32

Enables Dual AES operation

Sets the analogue output

Reverse the Left and Right

Allows Balance adjustment by

Restores standard factory p p

both channels. curve (32 - 48kS/s)

AES operation g plevels

goutputs

j yrotary control

ysettings.