Upload
others
View
7
Download
0
Embed Size (px)
Citation preview
DB SERIES
FINISH THOMPSON PUMPING SOLUTIONS AROUND THE WORLD
MODEL DB9
finishthompson.com
DB9 PERFORMANCE 3450 RPM
DB9 PERFORMANCE 1725 RPM
0
10
20
30
40
50
60
70
0 10FLOW (gpm)
0
3
6
9
12
15
18
21
1 2 3 4 5 6 7 8 9 10 11FLOW (m3/hr)
Curve Legend#1- 4.18" (106.2 mm)
NPSHr
#1
25%
45%
25%
35%
35%
45%
50%
55%
Min. Flow- 0.5 US gpm (1.9 lpm)
NP
SH
r (ft)
HE
AD
(ft)
NPS
Hr (
m)
HEA
D (m
)
30 40 5020
0
0.50 Hp
0.75 Hp
0
2
4
6
8
10
12
14
16
18
0 5 10 15 20 25FLOW (gpm)
HEA
D (f
t)
0
2
3
4
5
FLOW (m 3/hr)
NPS
Hr
(m)
Curve Legend#1- 4.18" (95.2 mm)
NPSHr
#1
0.10 Hp
Min. Flow- 0.25 US gpm (0.95 lpm)
25% 45%
25%
35%
35%
45%
50%
55%
HEA
D (m
)
NPS
Hr (
ft)
0 1 2 3 4 5
1
FEATURES & CAPABILITIES
+ Five-year warranty
+ Extended run dry ability (with carbon bushing)
+ High operating efficiency
+ Polypropylene or PVDF construction
+ Powerful neodymium magnets
+ Close-coupled design
+ Threaded (NPT or BSP), flanged, or union connections
+ Horizontal or vertical installation with IEC motor
+ Back pullout design
+ Mounts to NEMA and IEC (B5 & B14) motor frames
+ Easy set measurement free drive
+ ISO 1940 G2.5 balancing
+ CE certified/ATEX available
+ Working pressure to 80 psi (5.5 bar)
+ Specific gravity over 1.8
+ Viscosity up to 150 cP
+ Polypropylene—180o F (82o C)
+ PVDF—220o F (104o C)
APPLICATIONS+ Chemical processing+ Plating+ Water and wastewater+ Electronics+ Pharmaceuticals+ Wet scrubber+ Pulp and paper+ Heat exchanger+ and many more!
Kalrez® is a registered trademark of DuPont Performance Elastomers Simriz® Perfluoroelastomer is a registered trademark of the Simrit® division of Freudenberg-NOK Hastelloy® C is a registered trademark of Haynes International, Inc.
DB SERIES
FINISH THOMPSON INC. - HEADQUARTERS 921 Greengarden Road | Erie, PA 16501 800.934.9384 | ph 814.455.4478 | fx 814.455.8518email [email protected]
FINISH THOMPSON INC. - EUROPE CENTEROtto-Hahn-Strasse 16 | Maintal, D-63477 Germany49 (0)6181-90878-0 | fx 49 (0)6181-90878-18email [email protected] finishthompson.com
Specifications
Dimensions
Description Polypropylene PVDF
1 Impeller housing Glass-fiber reinforced
polypropylene (GF PP)
Carbon-fiber reinforced
PVDF (CF PVDF)
1A Impeller housing thrust ring
High purity alumina ceramic or silicon carbide (SiC)
2 O-ring FKM, EPDM, Simriz®, or Kalrez
3 Impeller GF PP CF PVDF
3A Impeller thrust ring GF molybdenum disulfide filled PTFE, or SiC
4 Inner drive Neodymium iron boron
magnets encapsulated
in unfilled polypropylene
Neodymium iron boron
magnets encapsulated
in unfilled PVDF
5 Bushing Carbon, PTFE, high purity alumina ceramic, or SiC
6 Shaft High purity alumina ceramic, Hastelloy® C, or SiC
7 Barrier GF PP CF PVDF
7A Barrier thrust ring Silicon carbide
8 Clamp ring Ductile iron
9 Motor adapter GF PP
10 Outer drive magnet Nickel-plated neodymium iron boron magnets/
steel
11A Motor adapter11B sealing kit (NEMA only)11C
Buna N, FKM, or EPDM
Motor Frame A B† C D E lbs. [kg] PP lbs. [kg] PVDF
NEMA 56C 7-3/16” [18.3 cm] 17-7/16” [44.3 cm] 2-7/16” [6.2 cm] 4-7/8” [12.4 cm] 3-1/2” [8.9 cm] 10.5 [4.8] 11.1 [5.0]
NEMA 145TC 7-3/16” [18.3 cm] 17 15/16” [45.6 cm] 2-3/4” [7.0 cm] 5-1/2” [14.0 cm] 3-1/2” [8.9cm] 10.5 [4.8] 11.1 [5.0]
IEC 63 w/B14 or B5 7-5/8” [19.4 cm] 14-7/8” [37.8 cm] 1-31/32” [5.0 cm] 3-15/16” [10.0 cm] 2-15/32” [6.3 cm] 14.0 [6.4] 15.0 [6.8]
IEC 71 w/B14 or B5 7-5/8” [19.4 cm] 15-13/16” [40.2 cm] 2-7/32” [5.6 cm] 4-13/32” [11.2 cm] 2-25/32” [7.1 cm] 14.0 [6.4] 15.0 [6.8]
Dimensions and weights are for reference only. Weights listed are for pump only; motor not included.†Varies with motor manufacturer.
1" MNPT OR MBSP
B†
A
E
7 3/16"(18.3 cm)2 15/32"
(6.3 cm)
1" FNPT OR FBSP
D
C
F1 G1
H1
1Dimensions for F, G, and H can be found in the Outline Dimensions booklet in the Downloads section of www.finishthompson.com.
Also available 1” x 1” 150 lb. ANSI/ISO PN20/PN40/JIS 10K or 32mm x 32mm union connection. Flanges are in compliance with bolting dimensions only.