DAV-DZ570 _2

Embed Size (px)

Citation preview

  • 8/2/2019 DAV-DZ570 _2

    1/15

    S-AIRGeneral setup guide

    INTERNAL USE ONLY

    for 2008 DAV models

  • 8/2/2019 DAV-DZ570 _2

    2/15

    1

    -Basic setup-

    (Note)

    Please be noted this is for general knowledge.

    Depends on sales situation, some S-AIR model is not

    available in some area.

  • 8/2/2019 DAV-DZ570 _2

    3/15

    Basically no setup is needed.*

    2How to connect

    *Simply by matching the ID (A or B or C) of the main unit and the

    S-AIR sub unit, you can establish sound transmission.

    Default ID value is A in Sony home theater related product.

    Sub unit (1)Wireless Surround Amplifier

    Sub unit (2)Wireless Audio Receiver

    Main unit

    Home Theater head unit

    ID A

    ID A

    ID A

    DAV(HCD)-models (included S-AIR function)

    AIR-SA10, etc

    TA-SA100WR, etc

  • 8/2/2019 DAV-DZ570 _2

    4/15

    3INITIAL SET UP INFORMATION

    Initial informationS-AIR Module In the box In the Box In the Box

    Pairing (RF Change) Auto (ON) Auto (ON) Auto (ON)

    Default ID A A A

    S-AIR Mode Party Mode - -

    Standby Mode Off - -

    CEC Mode Off - -

    Main unitHome Theater headunit

    Sub unit (1)Wireless SurroundAmplifier

    Sub unit (2)Wireless AudioReceiver

  • 8/2/2019 DAV-DZ570 _2

    5/15

    4

    Basic information to connect

  • 8/2/2019 DAV-DZ570 _2

    6/15

    To check the transmission status

    5Basic information to connect

    You can check the status of sound transmission between the main unit andsub unit (surround amplifier or audio receiver) by checkingthe POWER / ON LINE indicator on it.

    POWER / ON LINEindicator

    Turns green.

    Turns red.

    Flashes green.

    Turns off.

    Status

    Sound transmission isestablished.

    Sound transmission is notestablished.

    Sub unit does not output

    sound.Sub unit turns off

    WirelessAudio

    Receiver

    WirelessSurroundAmplifier

    Wireless Audio Receiver hasintensity value indicator.

  • 8/2/2019 DAV-DZ570 _2

    7/15

    6

    Set up trouble solving

  • 8/2/2019 DAV-DZ570 _2

    8/15

    (A) First check...

    7Set up Know-How

    Checking the following , you can probably make S-AIR connectionwithout problem.

    (1)Check the wireless transceiver of

    the main unit and *S-AIR sub units insert correctly.

    (2)Check the S-AIR ID

    Using the same ID among the main unit and S-AIR sub units.

    (B) Checking the other cable

    Please set the other cable such as HDMI cable , speaker cable andpower cord from S-AIR transceiver.

    *S-AIR sub unit: EZW-RT10/T100, etc

  • 8/2/2019 DAV-DZ570 _2

    9/15

    (C) Check the arrangement

    8Set up Know-How

    Please change the arrangement of main unit and S-AIR sub unitsabout the height, direction.

    (D) Check the other wireless products

    Set up the S-AIR product in the clean environment wirelessly.

    If there are other wireless products, try to-install the S-AIR main unit and S-AIR sub unit away from

    other wireless products.

    -stop using other wireless products.

  • 8/2/2019 DAV-DZ570 _2

    10/15

    (E) If sound transmission is unstable (1/3)

    9Set up Know-How

    After you check the process (A) to (D), if you can not get stableconnection, please refer the following.

    (1)RF CHANGE setting

    If you use multiple wireless systems which sharing the 2.4 GHz band,such as wireless LAN or Bluetooth, the transmission of S-AIRproducts or other wireless systems may be unstable. In this case,the transmission may be improved by changing the following RF

    CHANGE setting to OFF.

    (2)Select the ID so that sound transmission is most stabilized.

    how to setup RF CHANGE -> see next page.

  • 8/2/2019 DAV-DZ570 _2

    11/15

    (E) If sound transmission is unstable (2/3)

    10Set up Know-How

    Front panel display(on remote)

    Remote commander

    How to set RF CHANGE to OFF

  • 8/2/2019 DAV-DZ570 _2

    12/15

    How to change S-AIR ID

    Using the same ID among main unit and sub units.

    11Set up Know-How

    Select S-AIR IDslide switch

    Back panel

    Back panel

    Sub unit

    WirelessAudio Receiver

    Main unitHome Theater headunit

    Sub unitWirelessSurround Amplifier

    Press[PLAY] + [PAUSE] + [FUNCTION]

    Select S-AIR ID

    slide switch

    (E) If sound transmission is unstable (3/3)

  • 8/2/2019 DAV-DZ570 _2

    13/15

    (F) Prohibited activity

    12Set up Know-How

    Dont insert/remove wireless transceiver while the power is ON.Make sure that the AC power cord is not connected to a wall outletwhen you insert/remove it.

    Wirelesstransceiver

    WirelessAudio Receiver

    Home Theater head unit

    WirelessSurround Amplifier

  • 8/2/2019 DAV-DZ570 _2

    14/15

    Pair each S-AIR model by each pairing individually

    Choose different ID (A/B/C) among each main unit and sub units.

    13Set up Know-How

    Back panel

    Back panel

    Sub unit

    WirelessAudio Receiver

    Main unitHome Theater head unit

    Sub unitWirelessSurround Amplifier

    Press[PLAY] + [PAUSE] + [FUNCTION]

    (F) To connect more than 1 S-AIR model in one place

  • 8/2/2019 DAV-DZ570 _2

    15/15

    Published by

    Sony Corporation

    Audio & Video Business Group,

    Operation Division,

    AU Quality Assurance Dept.,

    Service Engineering sect.

    2008.9

    9-889-286-01