PRODUCT

BULLETIN

CVC P – 65 It is a highly stable synthetic lubricant designed for operating under high dynamic loads where speeds are also very high in order of 80,000 – 1,00,000 RPM. It is normally used in place of SYNOL RG-10 (High Speed Grease) used in rotor bearings of Open-End-spinning machines operating at higher speeds where oil lubrication is preferable to grease lubrication.

It is also a high temperature long life lubricant where operating temperature go beyond 220°C. CHARACTERISTICS TYPICAL VALUES

1. Appearance Clear 2. Density @ 15°C, gm/ml 0.93 3. Flash Point °C, (COC) 236 4. Copper Strip Corrosion 100°C/3Hrs. ASTM 1a 5. Kinematic Viscosity @40°C (cst) 93 6. Kinematic Viscosity@50°C (cst) 63 7. Kinematic Viscosity @ 100°C (cst) 16 8. Viscocity Index 180 9. Conradson Carbon Residue % wt. 0.54 10. E.P Test Seizes with 6-weights 11. Pour Point°C Less than –9°C 12. Temperature (- 40 to + 220°C)

AREAS OF APPLICATION: It is used for the clutch of the feed speed variable gear box, reverse motion feed box bearings and gears of Open-End spinning machines.

BENEFITS:

� Long life lubricant for high speed applications � Excellent lubricity and low friction under high dynamic loads PACKING: 1-litre plastic bottle.

--------------------------------------------------

THE DATA OFFERED HEREIN IS TO BE TREATED AS A GUIDELINE. USER SHOULD THOROUGHLY EVALUATE THE PRODUCT BEFORE STANDARDIZING ITS USE.

SPECIFICATION MAY CHANGE FROM TIME TO TIME. THEREFORE SPECIFICATION SHOULD BE CALLED FOR, WHENEVER STANDARDIZING OUR PRODUCT.

D:\LITRATURCVC\\P-65.DOC\\STDS\2013\J