Upload
others
View
5
Download
0
Embed Size (px)
Citation preview
Date: 2/25/19
Re: Stone Substitution Request for Larimer County Satellite Maintenance Shops (2
Projects)
To Whom It May Concern:
We have reviewed the specifications given by Coronado Stone for their manufactured
stone veneer. The following charts show how Quality Stone Veneer compares to the
Specified product Coronado Stone:
Standard Coronado Stone Quality Stone Veneer
Manufacturer
Experience 50 years
30 years
www.qualitystoneveneer.com
Organizational
Membership
Masonry Veneer
Manufacturers Association
National Association of
Home Builders (NAHB) &
American Society for Testing
& Materials (ASTM)
LEED Information -- Manufacturing plants located
in Lancaster, PA, Tower City,
PA, and Denver, CO
Warranty 50 years on product to
original purchaser
50 years on product; 1 year
on installation to original
purchaser
Freeze-Thaw Durability ASTM C67 with less than
3% weight loss ASTM C666 with less than
3% weight loss
Compressive Strength
All Cast Veneer Stone
units exceed ASTM C39
and C192 with minimum
of 1800 psi.
All Cast Veneer Stone units
exceed ASTM C39 and C192
with minimum of 1800 psi.
Sheer Bond (Adhesion) ASTM C482 with
minimum of 50 psi. ASTM C482 with minimum
of 50 psi.
ICC-ES Strength &
Durability Tested
Meets or exceeds
Report # ESR-2598 Meets or exceeds Report #
ESR-3151
Water Absorption -- 15.1% when tested in
accordance with ASTM C127
Thermal Resistance: ASTM C177-71
R factor = 0.355/inch ASTM C518-91
R factor = 1.148
Fire Hazard Test: UL 723 UL 723
Density less than 15 pounds per
square foot 8 - 12 pounds per square foot
Rev. 2013
Quality Stone Veneer Inc. has been manufacturing stone since 1989 and installing stone
since 1976. We were active members of the Masonry Veneer Manufacturer’s
Association (MVMA) until it was disbanded in 2012. During our tenure with the
organization, our employees took instrumental leadership roles in writing the industry
standards and recommendations for installed adhered masonry concrete veneer.
Thank you for your assistance; we believe we can supply a superior product in both
believability and structural integrity at a lower cost by making this substitution. Please let
us know if you need anything else to submit this request. Further information and catalog
details can be found on our website www.qualitystoneveneer.com or by contacting our
Marketing Department for architectural presentation information.
Sincerely,
Derek Longenbach
Account Executive
Colorado Commercial Division
9777 US-85, Littleton, CO 80125
Requested manufacturer for substitution is acceptable. However, be sure toreview the actual proposed stone manufacturer in specification. Thisdocument is basing their review on "Coronado Stone" and the specification iscalling out for "Colorado Stone Company" and is not the same.
The stone is to match ashlar pattern, shapes and color as per the attachedphotograph.