™

DIGINK eMAX

© 2017 DIGIPRINT SUPPLIES™. All rights reserved. Reproduction in whole or in part without written permission is prohibited. All other brands and product names are registered trademarks or trademarks of their respective owners. Design & specifications are subject to change without notice. Some functions may require options, which may or may not be available at time of launch.

FEATURES & BENEFITS

True chemistry: the affinity of OEM inks & DigInksThe DIGINK eMAX Series Digital Inks are designed specifically for use in Roland Eco-Sol MAX Printers. Conveniently packaged in 440ml fully compatible cartridges, they provide a great value, high performance alternative to the OEM ink set. Users of Roland Eco-Sol MAX inks can now change to DIGINK eMAX Series Digital Inks without the need to convert, thanks to the Install & Print capabilities.

Due to the complete chemical and colour compatibility of the ink sets, OEM cartridges can be replaced with DIGINK eMAX Series Digital Inks cartridges as they run out, rather than all colours at the initial install. This saves both time and money as there is no need to perform wasteful ink fill procedures or dispose of unused ink. The inks exhibit excellent adhesion and flexibility on a variety of typical Point of Purchase (POP) substrates.

• Colour matched to Roland Eco-Sol MAX inks, avoiding the need for customprofiles in most situations.

• Can be mixed with Roland Eco Sol Max® metallic inks• Faster drying time for accelerated production speeds.• Superior scratch resistance for durability & easy handling.• Fully compatible with Eco-Sol MAX inks.• High impact, high intensity colours equivalent to the original OEM ink set.• Virtually odourless with no harmful volatile organic compounds (VOC).• Durability up to three years outdoors without lamination.• Consistent colour density values.• Excellent adhesion and flexibility on most digital inkjet media.• Environmental friendly Nickel-free

DATASHEET

Ink Comparison DigInk - Roland

Colour Gamut

Print Quality

KEY5=Good0=Poor

KEY = DIGINK = Roland

0

1

2

3

4

5

Open TIme

Odour Drying Time

Colour Gamut Comparison DigInk - Roland

KEY- = DIGINK

- = Roland

™

DIGINK eMAX

© 2017 DIGIPRINT SUPPLIES™. All rights reserved. Reproduction in whole or in part without written permission is prohibited. All other brands and product names are registered trademarks or trademarks of their respective owners. Design & specifications are subject to change without notice. Some functions may require options, which may or may not be available at time of launch.

STORAGE / SHELF LIFE

DATASHEET

APPLICATION

ECOSOL OUT PRINT

Remove the Roland

Eco-SOL ink cartridge.

No flushing is

necessary.

Install the DIGINK

eMAX ink cartridge.

You don’t need to

replace all cartridges at

the same time.

Continue printing with

better results.

Storage and transportation of ink and cleaning solutions should be carried out between 5 -̊ 25 C̊. Ink and cleaning solutions should always be kept away from heat, sparks, and flames. If stored or transported at a different temperature, the ink should be allowed to reach room temperature before calibration or printing. Recommended shelf life of this product is 15 months from the date of manufacture when stored under preferred conditions.

INKS

INDIEM01CY Cyan

PRINTER COMPATIBILITY

Roland BN-20 / RE-640 / RS-540 / RS-640 / SC-500 / SC-540 / SC-545EX / SJ-1000 / SJ-1045EX / SJ-500 / SJ-540 / SJ-545EX / SJ-600 / SJ-640 / SJ-645EX / SJ-740 / SJ-745EX / SP-300 / SP-300i / SP-300V / SP-540 / SP-540i / SP-540V / SP-540VVKIT / VS-300 / VS-420 / VS-540 / VS-640 / VP-300 / VP-300i / VP-540 / VP-540i / VP-540VKIT / XC-540 / XC-540MT / XJ-540 / XJ-640 / XJ-740

INDIEM01MA Magenta INDIEM01YE Yellow INDIEM01KK Black

INDIEM01LC Light Cyan INDIEM01LM Light Magenta INDIEM01FF Flush

DIGINK IN