Paradox RF Expander Module The Inner Range - Paradox RF module is a cost-effective wireless RF solution that allows Paradox Magellan Wireless PIR’s, reed switches, smoke detectors and remote control fobs to function on the Integriti or Concept Systems. Wireless functionality is added to the Inner Range Controller with the inclusion of Paradox Magellan wireless devices, with each Paradox Expander Module supporting 32 wireless detection zones (PIR’s, reed switches and smoke detectors). The interface supports monitoring low battery alarms for all wireless devices. The Paradox REM2 and REM3 remote control fobs provide bi-directional audible and visual feedback when arming or disarming the system and when controlling output auxiliaries. In addition to this, the REM 2 & 3 remotes feature an information button which can be used to indicate the current status of the security area. All fobs feature buttons which can be programmed to provide different actions and four or six digit wireless PIN verification is also provided when using the REM3 remote control unit. Paradox wireless devices: • Remote Controls & Fobs • Motion Detectors • Wireless Door Contacts (Reed Switches) Connectivity Specifications Physical Enclosure Dimensions: 150(L) x 166(W) x 32(D) (mm) (Not including antennae) Installation Environment: 0° - 50°C @ 15% to 85% Relative humidity (non-condensing) Electrical Input Voltage: PCB 11-14VDC (operational current 65mA) Zone Inputs: 32 wireless zones Key Fobs: 1 per user in Integriti Limit of 100 Fobs in Concept depending memory configuration System Inputs Transmitter Low Battery, Transmitter Poll Fail and RF Jam, Cabinet Tamper, Module Low Volts, LAN Fail and Module Low Battery, RF Frequency Band RF Frequency 433.92MHz Compatibility Requires Concept 4000 Control module firmware V7.61 or newer. If Insight software is being used Version 4.2 or newer is required for full compatibility. PIR’s: PMD1P, PMD75, PMD85 Wireless Door Contacts: DCT10, DCTXP2, DCT2 Remote Control FOBS: REM1, REM15, REM2, REM3 Asset Protector: GS250 Panic Pendant: REM101 Smoke Detectors: SD738 Ordering Options 995025 RF Module Paradox (433 Mhz) The RF expander is connected directly to the Controller RS-485 LAN. (Check memory allocations for module quantity with Concept Systems) Features • The Paradox RF Expander connects directly to the Integriti or Concept RS-485LAN • Each expander will provide up to 32 wireless detection zones • Cost effective RF Wireless Solution • Fully compatible with selected Paradox Magellan wireless devices, Detectors, Door Contacts, RF Fobs and Smoke Detectors • Bi-directional wireless audible & visual feedback on selected RF Fobs for area arming/disarming and output control • Wireless PIN entry using selected models of RF Fobs • Low Battery supervision & reporting from all wireless devices • Wireless panic input DATA SHEET Hardware PRO635025D Paradox RF Expander Hardware Data Sheet June 2018. The specifications and descriptions of products and services contained in this data sheet were correct at the time of publishing. Inner Range reserves the right to change specifications or withdraw products without notice.

DATA SHEET Weatherproof Keypad Paradox RF Expander Moduleassetcloud.innerrange.com/ProductFiles/5734-Datasheet-Paradox_RF... · Weatherproof Keypad Paradox RF Expander Module The

Download PDF Report

Upload
truongthien
View
226
Download
0

Embed Size (px)

Citation preview

Weatherproof Keypad Paradox RF Expander Module

The Inner Range - Paradox RF module is a cost-effective wireless RF solution that allows Paradox Magellan Wireless PIR’s, reed switches, smoke detectors and remote control fobs to function on the Integriti or Concept Systems. Wireless functionality is added to the Inner Range Controller with the inclusion of Paradox Magellan wireless devices, with each Paradox Expander Module supporting 32 wireless detection zones (PIR’s, reed switches and smoke detectors). The interface supports monitoring low battery alarms for all wireless devices. The Paradox REM2 and REM3 remote control fobs provide bi-directional audible and visual feedback when arming or disarming the system and when controlling output auxiliaries. In addition to this, the REM 2 & 3 remotes feature an information button which can be used to indicate the current status of the security area. All fobs feature buttons which can be programmed to provide different actions and four or six digit wireless PIN verification is also provided when using the REM3 remote control unit. Paradox wireless devices: • Remote Controls & Fobs • Motion Detectors • Wireless Door Contacts (Reed Switches)

Connectivity

Specifications PhysicalEnclosure Dimensions: 150(L) x 166(W) x 32(D) (mm) (Not including antennae)Installation Environment: 0° - 50°C @ 15% to 85% Relative humidity (non-condensing) ElectricalInput Voltage: PCB 11-14VDC (operational current 65mA)Zone Inputs: 32 wireless zonesKey Fobs: 1 per user in Integriti Limit of 100 Fobs in Concept depending memory configuration System Inputs Transmitter Low Battery, Transmitter Poll Fail and RF Jam, Cabinet Tamper, Module Low Volts, LAN Fail and Module Low Battery, RF Frequency Band RF Frequency 433.92MHz CompatibilityRequires Concept 4000 Control module firmware V7.61 or newer. If Insight software is being used Version 4.2 or newer is required for fullcompatibility. PIR’s: PMD1P, PMD75, PMD85Wireless Door Contacts: DCT10, DCTXP2, DCT2Remote Control FOBS: REM1, REM15, REM2, REM3Asset Protector: GS250Panic Pendant: REM101Smoke Detectors: SD738

Ordering Options

995025 RF Module Paradox (433 Mhz)

The RF expander is connected directly to the Controller RS-485 LAN. (Check memory allocations for module quantity with Concept Systems)

Features• The Paradox RF Expander connects directly to the Integriti or Concept RS-485LAN • Each expander will provide up to 32 wireless detection zones • Cost effective RF Wireless Solution • Fully compatible with selected Paradox Magellan wireless devices, Detectors, Door Contacts, RF Fobs and Smoke Detectors • Bi-directional wireless audible & visual feedback on selected RF Fobs for area arming/disarming and output control • Wireless PIN entry using selected models of RF Fobs • Low Battery supervision & reporting from all wireless devices • Wireless panic input

DATA SHEET

Hardw

are

PRO635025D Paradox RF Expander Hardware Data Sheet June 2018. The specifications and descriptions of products and services contained in this data sheet were correct at the time of publishing. Inner Range reserves the right to change specifications or withdraw products without notice.