2
page 1 of 2 Laser Adjustment All 6 degrees of freedom can be adjusted via remote control Shift, tilt, rotation Focus DATA SHEET APOLLO MR3T ADVANCED LASER SYSTEM FOR PATIENT ALIGNMENT MR-conditional roomlaser as configured Adjustable tilting brackets Central power supply IR remote control Room planning, installation and commissioning 12 months standard warranty INCLUDED Free-standing, floor mounted MR conditional column (post) for isocenter height from 900 to 1400 mm (from 35.4 to 55.1 inch) AQUARIUS phantom OPTIONS APOLLO MR3T red APOLLO MR3T green APOLLO MR3T blue 900–1400 mm Variable Isocenter Height Free-standing column Room lasers are necessary for patient positioning, aligning phantoms for regular quality assurance checks, and for assuring optimized isocenter accuracy for MR-Linacs. Integrated in a high-quality aliminium housing, our APOLLO MR3T room lasers combine advanced optics, high-precision mechanics and state- of-the-art electronics to ensure the highest level of stabiliy and reliability. The APOLLO MR3T system is certified for MRI devices up to 3 Tesla. DESCRIPTION

DATA SHEET APOLLO MR3T - LAP GmbH Laser Applikationen · 2019. 5. 13. · The APOLLO MR3T system is certified for MRI devices up to 3 Tesla. DESCRIPTION. LASER RADI ATION DO NOT STARE

  • Upload
    others

  • View
    1

  • Download
    0

Embed Size (px)

Citation preview

  • page 1 of 2

    Laser Adjustment

    ■■ All 6 degrees of freedom can be adjusted via remote control

    ■■ Shift, tilt, rotation

    ■■ Focus

    DATA SHEET APOLLO MR3T

    ADVANCED LASER SYSTEM FOR PATIENT ALIGNMENT

    ■■ MR-conditional roomlaser as configured

    ■■ Adjustable tilting brackets

    ■■ Central power supply

    ■■ IR remote control

    ■■ Room planning, installation and commissioning

    ■■ 12 months standard warranty

    INCLUDED

    ■■ Free-standing, floor mounted MR conditional column (post) for isocenter height from 900 to 1400 mm (from 35.4 to 55.1 inch)

    ■■ AQUARIUS phantom

    OPTIONS

    APOLLO MR3T red APOLLO MR3T green APOLLO MR3T blue

    900–1400 mmVariable Isocenter

    Height

    Free-standing column

    Room lasers are necessary for patient positioning, aligning phantoms for regular quality assurance checks, and for assuring optimized isocenter accuracy for MR-Linacs.

    Integrated in a high-quality aliminium housing, our APOLLO MR3T room lasers combine advanced optics, high-precision mechanics and state-of-the-art electronics to ensure the highest level of stabiliy and reliability.

    The APOLLO MR3T system is certified for MRI devices up to 3 Tesla.

    DESCRIPTION

  • LASER RADI ATIONDO NOT STARE IN TO BEAM

    CLASS 2 LASER PRODUCT

    Complies with 21 CFR 1040.10 and 1040. 11 except for deviations pursuant to Laser Notice No. 50, dated June 24, 2007.

    page 2 of 2

    LAP APOLLO MR3T is a registered trademark of LAP GmbH Laser Applikationen. Further designations of products or services may be registered trademarks of LAP GmbH Laser Applikationen or other organizations; their use by third parties may infringe the rights of the respective owners.

    LAP GmbH Laser ApplikationenZeppelinstrasse 2321337 LueneburgGermanyPhone +49 4131 9511-95Fax +49 4131 9511-96Email [email protected]

    LAP of America, LLC161 Commerce Rd., Suite 3Boynton Beach, FL 33426USAPhone +1 561 416-9250Fax +1 561 416-9263Email [email protected]

    LAP GmbH Laser ApplikationenПредставительство в Москве1, Казачий переулок 7119017 МоскваРоссийская ФедерацияТел. +7 495 7304043Факс +7 495 7304044Email [email protected]

    LAP Laser ApplicationsAsia Pacific Pte. Ltd.Blk 750A #07-08Chai Chee RoadTechnopark@Chai CheeSingapore 469001Phone +65 6536 9990Fax +65 6533 6697Email [email protected]

    LAP Laser Applications China Co. Ltd. East Unit , 4F Building # 10LuJiaZui Software ParkNo. 61 Lane 91 EShan RoadShanghai 200127ChinaPhone +86 (21)5047-8881Fax +86 (21)5047-8887Email [email protected]

    TECHNICAL DATA

    www.lap-laser.com

    DATA SHEET APOLLO MR3T

    © L

    AP

    GM

    BH,

    MK

    T-1

    90

    00

    3 1

    .0 e

    n, 2

    01

    9-0

    4-1

    8

    ISO 9001ISO 13485

    SYSTEMDimensions (H × W × D) 221 × 110 × 100 mm (8.7 x 4.3 x 3.9 inch)Weight 2.6 kgInternational Protection Rating IP20Operating temperature 15 … 30°CAmbient conditions 35 … 90 % rel. humidity, non-condensingSwivel angle 45°

    LASERLaser colour (typical wave length) red (638 nm), green (520 nm), blue (450 nm)Laser class 2Focusable range 1 … 4 mLine length at 3 m distance > 3 mLine width up to 4 m distance < 0.5 mm (blue), < 1 mm (red, green)Max. laser output power < 1 mW

    POWER SUPPLYExternal power supply 100 … 240 V AC, 50 … 60 HzInternal voltage 24 V DC

    REMOTE CONTROLDimensions (H × W × D) 163 × 63 × 21 mm (6.4‘‘ x 2.5‘‘ x 0.8‘‘)Weight 130 gInternational Protection Rating IP40Power supply 6 V DC (4 batteries type AAA/LR 03/Micro, 1.5 V)