Industry Online SupportHome
Product Support Services Forum mySupport
Entry type: Application example, Entry ID: 39863979, Entry date:
07/25/2014
Data communication between a S7-1200 and Telecontrol Server
Basic (Set 30)
Also available in the following languages:Deutsch espaol
franais
Entry belongs to product tree folder(s):Automation Technology
Automation Systems Industrial Automation Systems SIMATIC PLC Basic
Controller S7-1200Automation Technology Automation Systems
Industrial Automation Systems SIMATIC PLC Basic Controller
S7-1200Zentralbaugruppen Standard CPUsAutomation Technology
Automation Systems Industrial Automation Systems SIMATIC PLC Basic
Controller S7-1200Zubehr
mySupport Cockpit
Add to mySupport favorites Add to mySupport documentation
Favorites Personal messages My requests CAx downloads
Product information
Related linksCompatibility ToolRegister your SINAMICS Drive
Register Log in
Rate (0)
Task In a stormwater retention basin, excess water is stored to
relieve the sewer system. There is a continuous filling level
measurement in the stormwaterretention basin. An electronically
controlled sluice S1 is opened as soon the capacities in the sewage
system allow it.
The automated plant should be coupled wireless with a control
room and should fulfill these requirements for the
communication:The measured level will be sent cyclically from the
Remote Station to the Central StationIn case of maintenance or
critical filling levels in sluice S1, an alarm will be sent
immediately from the Remote Station to the Central StationThe
sluice S1 can be opened and closed manually via the Central
Station
The wireless data transmission is done via GPRS. A standard PC
or ICP will be used as platform for the Central Station.
Visualization and operation ofthe process in the Remote Station
will be achieved via a standard HMI-system also installed at the
Central Station. A continuously archiving of theprocess values in
the Central Station for further processing is required.
Fig. 01
Solution This application example shows how the given tasks can
be solved with SIMATIC components. The focus is on the GSM/GPRS
Modem CP 1242-7, theautomation system SIMATIC S7-1200 and the
Telecontrol Server Basic Software, which allow the communication
between Remote Stations and theControl Room (Central Station) based
on GPRS.
Fig. 02
Central stationThe Central Station consists of a PC with the
software componentsTelecontrol Server Basicand WinCC Runtime
Advanced. The IPC is connected to theInternet via a standard
DSL-Router.
Remote stationA GSM/GPRS Modem CP 1242-7 is coupled via a bus
interface to the SIMATIC S7-1200 controller 1214C. The GSM/GPRS
Modem has a SIM card. Forcoupling with the air interface a quad
band GSM/GPRS antenna ANT 794-4MR is used. The power supply of all
components is provided via a SIMATICPM1207 power module.
DownloadsContents of the downloads
Download
Flyer
DocumentationProcess data exchange between a Remote Station and
Telecontrol ServerBasicCodeProject file for TIA V11 (STEP 7 und
WinCC) Telecontrol Server Basic configuration file
Your opinion is important to usPlease help us with your feedback
to improve our entries
Further InformationTitle
Link
Set 31: Data communication between several S7-1200 with or
without Telecontrol Server Basic Entry ID:58099765
Set 32: Wireless signaling and switching via SMS with S7-1200
Controllers Entry ID:58638283
Set 33: Teleservice of a S7-1200 with Telecontrol Server Basic
Entry ID:56720905
Set 34: Data communication between a S7-1200 and Telecontrol
Server Basic via a temporary GPRS connection Entry ID:63365552
SIMATIC S7-1200 System Manual Entry ID:36932465
SIMATIC CP 1242-7 System Manual Entry ID:61029644
Telecontrol Server Basic System Manual Entry ID:50898745
Security NoticeCautionSiemens provides products and solutions
with industrial security functions that support the secure
operation of plants, solutions, machines, equipmentand/or networks.
They are important components in a holistic industrial security
concept. With this in mind, Siemens products and solutions
undergocontinuous development. Siemens recommends strongly that you
regularly check for product updates.For the secure operation of
Siemens products and solutions, it is necessary to take suitable
preventive action (e.g. cell protection concept) and integrateeach
component into a holistic, state-of-the-art industrial security
concept. Third-party products that may be in use should also be
considered. For moreinformation about industrial security,
visit
http://www.siemens.com/industrialsecurity.To stay informed about
product updates as they occur, sign up for a product-specific
newsletter. For more information,
visithttp://support.automation.siemens.com.
Latest changeFigures, Flyer, Security Notice
Additional KeywordsSet 21, Scenario 1, CE-X21
Associated product(s)
User online
Presales infoCatalog and ordering system onlineTechnical
infoSupportService offerTraining
Contact & partners
Entry
Home Product Support
Industry Online Support International Language Contact Help
Support Request Site Explorer
Internet
Data communication between a S7-1200 and Telecontrol Server
Basic (Set 30) - ID: 39863979 - Industry Support Siemens
14/04/2015
https://support.industry.siemens.com/cs/document/39863979?lc=en-WW
1 / 2
