1
Dart | 21281SWSN Job Name:________________ Job Type:________________ Quantity:________________ Comments:________________ PRODUCT DESCRIPTION Inspired by the Modernist architect Edward Dart, this collection features straight line frames finished in Satin Brass or Satin Nickel that support Satin White glass cylinders for a clean and modern look. The end of the frames turn up and end in an angle emphasizing a minimalist geometry popular in Modernist work. MEASUREMENTS DIMENSION : 5.5'' W x 7.75'' H x 5.75'' Ext MAX OAH : 5.5'' W x 4.75'' H HANGING WEIGHT : 1.72 lb LAMPING INPUT VOLTAGE : 120V BULB : 1 x 60W Incandescent E26 Medium , 60W Total BULB INCLUDED : (Not Included) LIGHTING_DIRECTION : Up/Down FINISHES OPTION Satin Brass Satin Nickel GLASS Satin White SW MATERIAL Steel, Glass RATINGS cULus Damp Location ADDITIONAL INSTALL UP/DOWN: Up/Down SLOPE: 30 OPERATING TEMPERATURE: -20°C (-4°F), 40°C (104°F) Always consult a qualified electrician before installing any lighting product.

Dart| 21281SWSN

  • Upload
    others

  • View
    12

  • Download
    0

Embed Size (px)

Citation preview

Page 1: Dart| 21281SWSN

Dart | 21281SWSN Job Name:________________ Job Type:________________ Quantity:________________ Comments:________________

         PRODUCT DESCRIPTIONInspired by the Modernist architect Edward Dart, this collection features straight line frames finished in Satin Brassor Satin Nickel that support Satin White glass cylinders for a clean and modern look. The end of the frames turn upand end in an angle emphasizing a minimalist geometry popular in Modernist work.

MEASUREMENTSDIMENSION :  5.5'' W  x 7.75'' H x 5.75'' ExtMAX OAH :  5.5'' W  x 4.75'' HHANGING WEIGHT :  1.72 lb

LAMPINGINPUT VOLTAGE : 120VBULB :  1 x 60W Incandescent E26 Medium , 60W TotalBULB INCLUDED : (Not Included)LIGHTING_DIRECTION : Up/Down

   

FINISHES OPTION

Satin Brass

Satin Nickel

GLASSSatin White SW

MATERIALSteel, Glass

RATINGScULusDamp Location

   

ADDITIONALINSTALL UP/DOWN: Up/DownSLOPE: 30OPERATING TEMPERATURE:-20°C (-4°F), 40°C (104°F)

Always consult a qualified electrician before installing any lighting product.