Upload
others
View
24
Download
0
Embed Size (px)
Citation preview
DANIELS MANUFACTURING CO.
Phone: 402-387-1891 ~ Toll Free: 800-736-0776Fax: 402-387-1961
P.O. Box 67 ~ 87725 State Hwy. 7 ~ Ainsworth, NE 69210Website: www.danielsmfg.com E-Mail: [email protected]
RETAIL PRICE LIST
Located in the Sandhills of Nebraska, Daniels Manufacturing Co. has been manufacturing the world’s finest livestock handling equipment since 1958.
Priding ourselves in staying on the cutting edge of the livestock handling equipment design and manufacturing. In the past three years, we have sold equipment in eight countries around the world and will continue to offer bold and revolutionary new products relating to livestock, their care, and processing.
As always, all of our products come with a Limited Warranty.
Due to high demand of facility drawings and changes to customer plans, we will be charging a fee for ALL CAD drawings, consulting, and travel expenses.
All designs, drawings, and pictures are the sole property of Daniels Manufacturing Co. and reproduction is strictly prohibited. If our designs or drawings are incorporated into your facility and equipment is purchased or installed, this fee will be waived.
Daniels Manufacturing Co.
In This Year’s Catalog, You Will Find...Low Stress Cattle Handling Information.......................................................................................................................Page 2Panels, Gates, and Accessories......................................................................................................................................... Page 3Arch Gates and Portable Corral Accessories................................................................................................................. Page 4Portable Corrals, Loading Chutes, and Panel Carriers................................................................................................Page 5Portable Panel Processing Systems................................................................................................................................. Page 6Continuous Fencing and Feeding Systems....................................................................................................................Page 7Windbreaks..........................................................................................................................................................................Page 8Calving Barns and Accessories........................................................................................................................................ Page 9Horse Barns and Garages.................................................................................................................................................. Page 10Windmill Towers and Accessories, Clotheslines, and Sprinklers............................................................................ Page 11Hydraulic Squeeze Chute.......................................................................................................................................Pages 12 & 13Portable Alleyways.............................................................................................................................................................Page 14Stationary Alleyways......................................................................................................................................................... Page 15Side Exit Alley, Transition Cages, and 5-Way Sort...................................................................................................... Page 16Feedyard Duty Loading Chute and Equipment............................................................................................................Page 17
- Call Today For A FREE DVD Of All Daniels Manufacturing Co. Products -(Prices and Items subject to change without notice) Prices Effective 3-1-17
100%MadeIn TheUSA
The Bud Box and Low Stress Cattle Handling Information
In the feedlot industry today, we are challenged with an increased rate of musculoskeletal injuries that occur as a result of poor facility design and mishandling of the cattle.
As we move forward our cow/calf and feedlot industries are becoming more aware and prioritizing the animal’s well being and care of cattle.
Daniels Manufacturing Co. of Ainsworth, Nebraska has been a progressive and innovative designer of livestock handling facilities across the United States, Australia, Canada, and Europe.
In the U.S, we have designed facilities for Cactus Feeders, Cargill Feedlots, Timmerman Feedlots, and many other feeding operations in South Dakota, Nebraska, Colorado, Kansas, Oklahoma, and Texas.
Danny Daniels, owner of Daniels Manufacturing Company, has attended several Bud Williams Stockmanship Schools on the training of low stress handling of cattle and has sought advice from Bud Williams himself as well as several other animal specialists.
Dr. Tom Noffsinger, Dr. Lynn Locatelli, Dr. Kip Lukasiewicz, Curt Pate, and several others have assisted Danny in the design of facilities to take advantage of voluntary cattle flow.
When designing facilities, Danny Daniels or Dr. Kip Lukasiewicz make personal visits to look the area over and then design the facility to the normal flow of cattle movement. They utilize open facilities and a Bud Box to aid in the voluntary flow of cattle into their double working alley and hydraulic squeeze chute, which are also designed to reduce potential injury to cattle.
While many snake alleys are V-floored and curved, Daniels alleys are straight with adjustable sides (manual or hydraulic). This design is centered around the normal instincts of the animal, which is to go in straight lines and allow them to walk with a normal base.
Cattle also like to see what is pressuring them. The Bud Box and Double Alley are designed with open sides to allow cattle to see the handler and react to their position and movement.
The hydraulic chute has been upgraded several times to incorporate the ideas from many handling experts. It is by far the quietest and most user friendly chute on the market. With its unique squeeze design, neck extenders, and convenient hydraulic operating system, the Daniels squeeze chute is the best on the market.
Please call Daniels Manufacturing Company, Dr. Tom Noffsinger, or Dr. Kip Lukasiewicz with any question you may have on future facility design.
Page 2
Page 3
Portable Cattle Panels & AccessoriesHigh Tensile Strength Tubing
Gate ClosersFor Wire Gates...
Will not drop gate if wire breaks or hook
comes loose$1900
GL-2 GL-4GL-3
Gate LatchesGL-3 (right) & GL-4 (left)............................................$4150
GL-2 Latch (both).......................................................$4600
Wood PostRound Bracket
Square PostY
Bracket
Flat Wall Mount
T Bracket
Steel Pipe PostWeld On Bracket
All Mounting Brackets............$635 Ea.
Posts4 1/2” O.D. x 8’ x 1/4” WallSteel Post................................................................$11200
2 7/8” O.D. x 8’ x 1/4” WallDrill Stem Post.......................................................$8100
Weld On LoopFor Steel Post
$130
Retractable Pull Pin
Can be added to any gate when
you order$2600
Panel Loops.................................................$315 Each Plank Mount (horizontal or vertical) or Round Post Mount
Mounting Bracket of Your Choice Furnished With Gates
Wt. Price25.....................$9600
28.....................$10200
35...…………..$11400
53.....................$14500
66.....................$17400
80.....................$19200
93.....................$21600
110...................$25600
123...................$29200
138...................$34000
153...................$38900
Wt. Price*39................... $12500
*44................... $14000
*68................... $15900
78.....................$21500
97.....................$23400
117...................$26400
146...................$31800
159...................$34000
178...................$39100
*199................. $44400
*220................. $50600
Heavy Frame, Butt, and Bottom Bar
*Built by Order Only - Not Stock Item!
Opening2 1/2’3’4’6’8’10’12’14’16’18’20’
CP-1 Gates - 52” HighCP-1 CP-1 x HBB
Wt. Price77..............$18100
86..............$20200
96..............$22700
112............$25900
128............$29200
5 Feet High Livestock Panels CP-2 CP-2 HBB
Length8’ 4”10’ 4”12’14’16’ CP-5 Connector Pin........................................$850
Special Built Buffalo Panels 6’ Tall - 7 bars - Built By Order Only
Wt. Price108............$25300
126............$28000
155............$32900
168............$35700
197............$40400
Page 4
Gates & CombosHight Tensile Strength Tubing
Panel Gate ComboWith Any Size Gate
Transition Cage
Provides Ability to Sort Two Ways$94500
“Easy Access”Horse
HandleOur Horse Handles can be added to any
gate.$4800
10’...................Wt. 191 lbs. $52400 14’..................Wt. 220 lbs. $57500
12’...................Wt. 202 lbs. $54200 16’..................Wt. 241 lbs. $65900
- Build By Order Only -
Arch Gates Low Level Frame Gates
32”......................................Wt. 90 lbs $29800
4’.........................................Wt. 105 lbs. $32500
6’.........................................Wt. 120 lbs. $35300
8’.........................................Wt. 135 lbs. $37600
10’.......................................Wt. 155 lbs. $39700
We recommend standard weight CP-1 Gates only. X-Heavy gates by special order.
32”..................Wt. 92 lbs. $32900 8’....................Wt. 154 lbs. $41300
4’.....................Wt. 107 lbs. $35600 10...................Wt. 175 lbs. $43600
6’.....................Wt. 132 lbs. $38600
Page 5
260 to 325 Cow Corral Unitwith 322 Feet of Panel Fence
Complete Corral UnitWt. 4,171 lbs.$12,11500
Complete Corral Unit Less Chute
Wt. 2,881 lbs.$6,46500
Model A Portable Chute with
Torsion AxleWt. 1,760 lbs.$5,65000
Prices Do Not Include Panel Trailer
Price Includes 20 - 14’ CP-2 Panels.... @................... $25900
2 - 8’ Arch Gates....... @................... $37600
1 - 32’ Arch Gate....... @................... $29800
30 - CP-5 Pins..............@................... $850
1 - Model A Chute....@................... $5,65500
Entire corral loads easily into 12’ x 38’ chute for easy transportation. Chute adjusts from 26 inches to 52 inches in height for ease in loading or unloading at any level. This chute is equipped with torsion axle, radial tires, fenders, mud flaps, tongue that swings sideways out of way, jack, built in rear gate, and extension hangers to allow a dozen extra panels or a working alley to be hauled. All stationary and portable chutes have the new Rumber flooring.
Stationary Loading Chute18’ Length$6,64000
NewRumber
Flooring!
Gooseneck Panel Carrier..............$6,79900
With Tandem Axles - Holds 50 Panels
Bumper Hitch Panel Carrier...........$4,30000
With Tandem Axles - Holds 40 Panels Wt. 1,080 lbs.
Page 6
Portable Pulling AlleyP-1 Pearson Headgate w/11’ Panel.................... $1,51000
P-2 7’ 9” L.H. Nurse Gate in Arch...................... $43400
P-3 7’ 9” Nurse Gate............................................. $39100
P-4 11’ Panel - With 2’ Gate Instead of Head Catch....................................$61000
P-5 8’ Arch Gate.................................................... $37600
P-6 11’ Divider Panel............................................$22500
P-7 8’ CP-2 Panel................................................... $17800
CP-5 Connector Pin....................................... $850
Select the panels you need to set up a pulling alley in the barn or out in your calving lot. Will fit in with all Daniels panels.
Hog, Sheep, & Calf Pens...Call For Pricing!
Figure 7-1 - 14’ x 5’ Alley Panel...........................................………...............................Wt. 215 Lbs. $45700
- 12’ x 5’ Alley Panel......................................................................................Wt. 185 Lbs. $41800
- 10’ x 5’ Alley Panel......................................................................................Wt. 155 Lbs. $37700
- 8’x 5’ Alley Panel........................................................................................ Wt. 125 Lbs. $32100
Figure 7-2 - No Back - (For Use With Portable Alley).......................................................................... $16100
Figure 7-3 - Palpation Cage............................................................................................ Wt. 170 Lbs. $72000
Figure 7-4 - Adjustable Arch - (No Gate)..................................................................... Wt. 50 Lbs. $15500
Figure 7-5 - Adjustable Arch with Side Hinge Gate................................................. Wt. 75 Lbs. $38500
Figure 7-6 - 32”Slide Adjustable Arch Gate......................................................................................... $76200
Figure 7-7 - 16’ CP-2 Panel.............................................................................................. Wt. 128 Lbs. $29200
Figure 7-8 - 14’ CP-2 panel - (3 shown)......................................................................... Wt. 112 Lbs. $25900
Figure 7-9 - 10’ Arch Gate............................................................................................... Wt. 155 Lbs. $39700
Pearson Headgate - (Not Shown).................................................................................. Wt. 200 Lbs. $90500
Pearson Adapter Arch - (Not Shown).................................................................................................... $29700
Build Your Own Alleyway
Page 7
White Continuous Fence
Pipe......................................................................$225 Per Foot - Per PipeContinuous Fence Pipe Lengths Are 24’ 3”
3” Crimp On One End For Telescoping ConnectionCorners.........................................................................................$525 EachStarting & Ending Section......................................................$2400 Each
(For a 6 Pipe and Under Fence)Clips and Lag Screws N/C on An 8’ Post Spacing
Example: 6 Bar High Painted White $1260 a Running Foot x _______ + Post = Total
LivestockFeeding
Items
Telescoping Bale & Loose Hay FeederThe 7’ x 14’ sides work in as livestock eats. Ranchers say
cattle waste much less hay with this feeder than others they use. Panels can be used for portable corral panels in off season.7’ x 14’ Rack Complete....................................$98500
7’ Panel Only.....................................................$18200
10’ Panel Only - By Order Only.....................$22000
14’ Panel Only...................................................$31000
16’ Panel Only - By Order Only.....................$34200
20’ Panel Only - By Order Only.....................$44000
14’ Creep Feed Panel......................................$29900
Page 8
Windbreaks
From Windbreak...
- In Just 5 Minutes- One Person
- No Tools- No Bolts
To Shade!
In the tests we’ve run, this panel stops over 95% of the wind velocity and snow does not swirl over the top like a solid windbreak. Cattle will not drift away from protection.
• Heat Flows Up Through Holes• Stops 79% of Sun
Stationary Windbreak Panel.......................$68800
Bare Post..........................................................$14900
Post With Shade Latch..................................$20400
Cost of 60’ Stationary Windbreak...........$7,07300
8 Panels in a 60’ SectionPosts are 4 1/2” O.D. with 1/4” Wall
The outside frame of these panels is made of 1 1/2” x 3” x 14 gauge tube. The 21% perforated sheets are 20 gauge galvanized-punched full of 1 5/8” holes and corrugated to 3”.
Weight per 12’ sheet is 54 lbs. - 7’ x 12’ complete panel weight is 225 lbs.
Portable Windbreak Panel........................................$65000
The windbreak panel will hook-up to the Daniels livestock buildings and all of our portable livestock panels. The windbreak panels can be set up in an open area or around a building for added protection.
Page 9
Barns and Sheds
Calving Barns
Tack Rooms Built
In On Request
Size32’ x 24’ Totally Enclosed - 6 Pens..................................32’ x 32’ Totally Enclosed - 8 Pens..................................32’ x 40’ Totally Enclosed - 10 Pens..................................32’ x 48’ Totally Enclosed - 12 Pens..................................32’ x 56’ Totally Enclosed - 14 Pens..................................
Barn With Gates & Panels
$24,97800
$29,47300
$35,07200
$40,12400
$46,27500
Barn Complete*
$27,27200
$31,76900
$37,37000
$42,41900
$48,57000
Calf Shedsand Loafing Barns
Barn With Gates & Panels
$10,08800
$12,42900
$15,09500
$17,56200
$20,50500
Barn Complete*
$12,38400
$14,68800
$17,39300
$19,86000
$22,80200
*Complete Barn Package - Includes pulling alley made up of Pearson automatic head gate, 2 nurse panels, and 2 special divider panels with extra gates. This packages is $2,22000 over and above the price of any barn equipped with gates and panels.
Size12’ x 24’ Open Front - 3 Pens..........................................12’ x 32’ Open Front - 4 Pens..........................................12’ x 40’ Open Front - 5 Pens..........................................12’ x 48’ Open Front - 6 Pens..........................................12’ x 56’ Open Front - 7 Pens..........................................
C-Section Nurse Gate ....................................Wt. 140 lbs. $54800
7’ 9” L.H. Nurse Gate .....................................Wt. 130 lbs. $39100
For Calving Barns - Bottom Folds Up Out of the Way10’ Nurse Gate..................................................Wt. 120 lbs. $50300
7’ 9” L.H. Nurse Gate in Arch .......................Wt. 135 lbs. $54900
Left & Right Hand Nurse Gates Available
These panels are specifically designed for calving barns.
Pearson Headgate w/11’ Panel...........................$1,51000
11’ Panel....................................................................$61000
With 2’ Gate Instead of Head Catch11’ Divider Panel.....................................................$22500
BarnBare Shelter
$21,08000
$24,87100
$29,60000
$33,86200
$39,06800
BarnBare Shelter
$8,28000
$9,91100
$12,00700
$13,87300
$15,18100
Page 10
Barns and Buildings
Horse Barn
Specifically built to your
sizes and needs.
Prices on Request
Processing Barn
Custom built
to your needs.
Prices on Request
Garages
All specially built
Prices on Request
New Calf Barn with Windbreak PanelsWindbreaks fold right up to the building. Extended windbreaks give a total of 56’ of wind block!
Call for Pricing of Buildings with Windbreak Panels.
The Thoroughbred Horse ShelterDesigned for horse shelter. 16’ x 24’ including 4’ overhang. 7’ 5 1/2” Back Wall & 9’ 5 1/2” Peak
Size16’ x 12’ Open Front - 1 Pen .........16’ x 24’ Open Front - 2 Pens........16’ x 36’ Open Front - 3 Pens........16’ x 48’ Open Front - 4 Pens........
Bare$6,27500
$10,12500
$13,95500
$17,79200
12’ x 12’ PenGate & Panel
$7,43400
$11,98500
$17,28300
$21,08400
Size16’ x 24’ Open Front - 3 Pens........16’ x 32’ Open Front - 4 Pens........16’ x 40’ Open Front - 5 Pens........16’ x 48’ Open Front - 6 Pens........16’ x 56’ Open Front - 7 Pens........
Bare$10,17500
$11,60900
$15,33800
$17,92200
$20,32300
8’ x 12’ PenGate & Panel
$12,06000
$13,74400
$18,15800
$21,69000
$25,18300
Page 11
Windmill Items - Clothes Line - Sprinklers16’ Windmill Tower - Includes Platform, Crown, Shutoff, & Anchors ........ $1,19300
24’ Windmill Tower - Includes Platform, Crown, Shutoff, & Anchors ........ $1,43000
Windmill Platforms .................................................................. $13200
Windmill Crowns ......................................................................$10900
10’ Windmill Adapter ............................................................... $13400
Pump Rods
Will Fit Aermotor MillsEasy Slack Adjustment, Sealed Swivel - Greased Fitted
6’ Mill - Standard Length ......................................................... $5325
8’ Mill - Standard Length ......................................................... $6000
6’ Mill - 2’ Longer Than Regular Length ................................$6200
8’ Mill - 2’ Longer Than Regular Length ................................$6700
Windmill Towers
Windmill Shut Off LeversFurnished With Daniels Towers Or Will Mount On Any
Tower$2800 Clothes Line...................................................$41500
All lines Tighten Evenly8’ x 12’ = 120’ Of Line
SprinklersThe Only Sprinkler You’ll Ever Have to Buy• Hot Dip Galvanized Steel• Heavy Brass Hose Fitting• Senninger Standard-Angle
Wobbler Sprinkler Head• Will Put 1/2” of Water on 50’ in 5
Hours at 35 PSI
Red Short $3600
Red Medium
$4400
Red Tall
$5600
$3850
Galvanized Sprinkler
Page 12
AHAll Hydraulic Squeeze Chute
Available StylesCall for Options
Feedlot Style Squeeze
Chute
Stationary Squeeze Chute
Portable Squeeze Chute
Features Include:
• Neck Stretcher for tagging, dehorning, checking teeth, doctoring eyes, etc.
• Sternum Support so cattle can’t
go down (Adjustable and Removable)
• Built in Palpation Cage with gas
springs on gates (No latches to rattle)(10’ only)
• Mounting Brackets for
attachment of scales • Special Traction floor with
offset 1 1/4” solid round to avoid slipping
• 8-Bolt Hub and Wheel for
portable model • Hip Squeeze for A-I and Preg
Checking (Adjustable and Removable) Option Only
10’ Feedlot Style AH Stationary Squeeze Chute
10’ AH Portable Squeeze Chute Entire Chute Measures 11’ 8 1/2” Long
Page 13
New Improved Neck Stretcher!
8’ and 10’ AH Squeeze Chute Inside Measurements
• Inside frame measures 6’ 4” Tall• Squeeze adjusts from 9 1/2” to 33”• From headgate to front of PP gate 92”• Headgate closes to 4” and opens to 32”• Sternum support adjusts from 11” to 20” in height• 20” Opening for shoulder branding & neck
vaccinating
Hydraulic Power UnitsStationary or Portable
Power Unit Options:Electric - Open Center...........................$2,86500
Electric - Closed Center........................ $3,4500
Gas - Open Center.................................$4,40000
Control Options:
Standard spool valves included in base price. Electric valves with hard-wired control or radio control.
Call For Pricing on Electric Over Hydraulic
18 Month Limited Warranty
on All AH All Hydraulic Squeeze
Chutes
Page 14
New Quieter
Operation!
Portable AlleywayOur Portable Alleyway is the fastest, easiest, and safest way to
process cattle in a straight line!
The latest version of our Portable Alley features a side swing gooseneck hitch for quick and easy setup. It also includes no-backs and side squeezes that are adjustable and undated heavy duty spring loaded jacks that operate simultaneously. With the addition of brass bushings to hinge points, this is undoubtedly the quietest alley produced in the market today!
All hinge points and moving parts now have oil impregnated brass bushings to reduce noise levels and increase longevity!
32’ - $18,62500 38’ - $20,69500 44’ - $22,46500
Page 15
Stationary Alleyway
Our Stationary Alleyway is the fastest, easiest, and safest way to process cattle in a straight line!
32’ - $12,90000 38’ - $14,67500 44’ - $16,35000
Optional Alleyway EquipmentHeadgate (No Slide Gate)............................. $1,13000 Palpation Cage (Stationary Only)....... $82500
Back Gate in Alley (Not Shown)...... ......... $31500 Travel Lights (Portable Only).............$54000
Portable Bud Box For Alleyway........ $3,61000
Call For Prices On Converting Alleys To Hydraulic Operation!
Designed for low stress handling!
Page 16
Side Exit Alley
SIDE EXIT ALLEY PRICING
10’ Single Alley.................. $8,06000
Headgate............................. $1,13000
Palpation Cage................... $85000
Slide Gate............................$1,40000
Sorting Alleys
Can either be manual, hydraulic, or electric over
hydraulic.Unlimited Exits For
Sorting Alley Options!Pictured is a Five-Way Sorting Alley
Load Out Transition
Designed For Semi and Horse Trailer Load Out
$2,26000Also Available...
Adjustable TransitionFor Processing!
Pictured In Front of Big Red Loading Chute
Page 17
We have taken the Daniels reputation for durability and reliability to the feeding industry with our new chute. This chute features a wider catwalk, side access door on the top deck, sliding gate at the top of the ramp, and a heavy duty, spring loaded bump plate. This chute utilizes Rumber flooring for greater grip and less chance of injury. We believe that this chute is built to handle many years of heavy duty use and as always comes with our 100% satisfaction guarantee.
Daniels Manufacturing Co.
Loading Chute$13,93500
Double Alley Back For Loading Chute
$3,85600
Portable Bud Box$3,61000
Stationary Bud Box$6,61000
Feedyard Duty Loading Chute
Loading Chute
Bud Box
Double AlleyBack
Page 18
K-State FacilityThis complete research livestock facility was built for the Kansas State University during
the summer of 2009. Daniels Manufacturing Co. and Dr. Kip Lukasiewicz designed and manufactured all equipment used in this facility.
The building was designed by Daniels Manufacturing Co. and installed by Green Gable Contracting. The K-State Facility covers 10 acres.
Page 19
Be Sure to Visit Our
North Display LotLocated Along
Highway 20 in Ainsworth, Nebraska
- Notes -_______________________________________________________________________________________________________
_______________________________________________________________________________________________________
_______________________________________________________________________________________________________
_______________________________________________________________________________________________________
_______________________________________________________________________________________________________
_______________________________________________________________________________________________________
_______________________________________________________________________________________________________
_______________________________________________________________________________________________________
_______________________________________________________________________________________________________
_______________________________________________________________________________________________________
_______________________________________________________________________________________________________
_______________________________________________________________________________________________________
_______________________________________________________________________________________________________
_______________________________________________________________________________________________________
_______________________________________________________________________________________________________
_______________________________________________________________________________________________________
_______________________________________________________________________________________________________
_______________________________________________________________________________________________________
_______________________________________________________________________________________________________
_______________________________________________________________________________________________________
_______________________________________________________________________________________________________
_______________________________________________________________________________________________________
_______________________________________________________________________________________________________
_______________________________________________________________________________________________________
_______________________________________________________________________________________________________
_______________________________________________________________________________________________________
_______________________________________________________________________________________________________
_______________________________________________________________________________________________________
_______________________________________________________________________________________________________
_______________________________________________________________________________________________________
_______________________________________________________________________________________________________
_______________________________________________________________________________________________________
_______________________________________________________________________________________________________