Upload
others
View
2
Download
0
Embed Size (px)
Citation preview
Detection rangeHold-timeDaylight sensor
Power supplySensor antenna socket
Stand-by period Stand-by dimming level
8794
102
45
2614
4
Model: ANT01 (standard)Dual-processor daylight sensor Infrared remote receiver
Fixing finger
RJ11 cable entry
Model: ANT02 (optional)Dual-processor daylight sensor Infrared remote receiver
Fixing bolt
Screw nut
RJ11 cable entry
Suggested size for mounting aperture: 21 x 18mm
Suggested size for mounting aperture: 25mm dia
3.5 22.0
38
44
50
14
10
2.5
14.0
10.0
1.0 16.5
17.5
24
28
24
DA DA Push 1 Push 2
PushDALI
This sensor contains a DALI power supply circuit, which gives DALI output to the driver to carry out the sensor on/off and dimming control.
DETACHABLE ANTENNA OPTIONS
DALI DIMMING MICROWAVE MOTION SENSOR
MODEL: FXS05DL
DALI Dimming with Detachable Antenna and Remote Control
38
44
50
t | +44(0)1543 396400 | e | [email protected] | w | www.fox-lux.co.uk
FXS05DL - KEY FEATURES
• DALI dimming control
• Easy programming via DIP switches or optional infrared remote control (REM01)
• Dual-photocell technology allows real daylight monitoring for use with 'step-dim' drivers in built-in applications
• RJ11 connection between the sensor body and antenna head, easy plug and play
• Designed for luminaires with limited space or with with metal louvres. Control unit can be mounted behind geartray while thedetached antenna head can be mounted remotely
• Zero-cross circuit protects the sensor relay against in-rush current, thereby maximising product life expectancy
• 5.8GHz C-band microwave motion sensor
• Operating voltage: 120 - 277V AC 50 - 60Hz
• Switched power : max. 30 devices; max. 60mA
• Stand-by power: 1s) : adjust the target lux level by turningthe light up or down. Both the adjustment on remote control and push switch can overwrite each other, the last adjustment remains in memory.
Sensor 'OFF' mode:
Short push (1s) : adjusts the dimming level
Sensor 'ON' mode:
* Short push (
2lux
10lux
6 7
1
SETTING VIA DIP SWITCHES
1
OFF
ON
ON
100%
2
50%
75%
sensoroff*
2
*to enter test mode (walk test) set hold-time to T3s*. This mode enables the user toset the desired detection range. In this mode, the daylight sensor is disabled, sowhen there is no motion detected the luminaire remains on. When motion isdetected, the luminaires cycles 3s on and 2s off.
3 4 5T3s30s90s5min
10min
30min
OFF
*
ON
ON
Disable
7
OFF
OFF
7
50lux
5
+
8 9 10
5min
10s
30min1h
10min
8
Stand-by dim level
This is the desired dimmed low light level after the hold-time in the absence of detected motion.
OFF
ON11
0%
12
10%
50%
30%
*
* when detection range is set to “sensor off” this sensor becomes a Push to DALI dimmer
I
II
III
IV
I
II
III
IV
I
II
III
IV
IIIIIIIV
VIV
IIIIIIIVVVI
Detection rangeDetection range can be reduced by selecting the combination on the DIP switches to fit user requirements.
Hold-time
This setting adjusts the period of full brightness after motion detection.
3 Daylight sensor
This setting adjusts the daylight threshold to enable or disable the sensor function.
“Disable”:
“50lux”:
The sensor works always, even during daylight.
The sensor works only in twilight.
“10lux, 2lux”: The sensor works only in the dark.
Stand-by period
This is the time period that the luminaire remains at a low light level before it is completely switched off in the long absence of detected motion.
= bi-level dimming control - luminaire always on
4
*0% = on/off control
10% Vdim = 1.5Vdc
30% Vdim = 3.0Vdc
50% Vdim = 5.0Vdc
8
t | +44(0)1543 396400 | e | [email protected] | w | www.fox-lux.co.uk
Press “Ambient learn” button, the latest surrounding lux value overwrites previous lux value learned, and set as the daylight threshold. This feature enables the fixture to function well in any real application circumstance.
Test3s Test mode
Ambientlearn
Ambient learn
Test mode default settings:• Daylight sensor = disabled• Hold time = 3s• Twilight time = N/A • Twilight level = N/A
To enter test mode (walk test) set hold-time to T3s*. This mode enables the user to apply the desired detection range. In this mode, the daylight sensor is disabled, so when there is no motion detected the luminaire remains on. When motion is detected, the luminaires cycles 3s on and 2s off (0.5s soft off/1.5s off).
*Users can quit this mode by pressing “ON/OFF”, “reset”, or any "hold time" bu�on.
SETTING VIA REMOTE CONTROL - REM01
Permanent ON/OFF function
Press “ON/OFF” button, luminaire goes to permanent on or permanent off mode, sensor is disabled.
*press “Auto”, “Reset” or “Ambient learn” to quit this mode.
Dim Dim +/-
Press “Dim” button to automatically dim up or down the light brightness during hold-time from 10% to 100%. Another press to lock it down when desired brightness is achieved.
*After desired brightness is locked down, if user wants to dim again reversely, just press the “Dim” button again and then lock down the new brightness again.
Auto Sensor mode
Press “Auto” button, the sensor starts to work and all settings remain the same as the latest status before the light was switched on/off.
Reset Reset functionREM01
Note:
The buzzer short beeps (~0.5s) ONCE when sensor successfully receives RC signal after pressing any buttons except for“Ambient learn”.
The buzzer short beeps (~0.5s) TWICE to start learning ambient lux after pressing“Ambient learn” Then followed by a long beep (~1s) to indicate the success of ambient learning.
Press “Reset” button, all settings go back to the value of DIP switch settings.
t | +44(0)1543 396400 | e | [email protected] | w | www.fox-lux.co.uk
DETECTION PATTERN
Ceiling mount (m) Wall mount (m)
Hei
ght
(m)
Hei
ght
(m)
WIRING DIAGRAM
FXS05DL
Antenna
DALI Driver
L N Push1Push2
DA DA L N + -LED
DALI Driver
DA
DA- DA+
DA L N + -LED
t | +44(0)1543 396400 | e | [email protected] | w | www.fox-lux.co.uk
DAYLIGHT MONITORING
Brighter
Darker
Lux OFF Level
Ambient Light
Lux ON Level
Lux Time Lux Time
Lights turn on Lights turn off
Occupancy detected
lssue V1: 5/1/2020
t | +44(0)1543 396400 | e | [email protected] | w | www.fox-lux.co.ukRegistered Office: Alex House 260/8 Chapel Street, Salford, Manchester, M3 5JZ
Company Registration No. 11821284 VAT Registration No. 320 9921 12
Utilising dual-photocell technology, the sensor can differentiate between natural light and artificial light from behind the diffuser. It can switch on automatically (even without movement) when the ambient light is below the target value, and then switch off automatically whenever the artificial light is not required (sufficient ambient light).
This is REAL & INTELLIGENT daylight monitoring for built-in applications.
Note: Lux-Off sampling time: ~30s; Lux-On sampling time: ~10s.
Lux-On function takes effect only when standby dimming period set at + ∞ .