Daewoo Cn230f Chassis Dtq20u4sc Tv Sm

Service Manual

http : //svc.dwe.co.kr

S/M No : TCN230FEF0

COLOR TELEVISIONCHASSIS : CN-230F

Model : DTQ-20U4SCDTQ-2033SCDTQ-27U4SC

Mar. 2003

4 Caution: In this Manual, some parts can be changed for improving, their performance without notice in the parts list. So, if you need the latest parts information,please refer to PPL(Parts Price List) in Service Information Center (http://svc.dwe.co.kr).

-1-

SAFETY PRECAUTIONS 2SPECIFICATIONS 5CIRCUIT BLOCK DIAGRAM 6ALIGNMENT INSTRUCTIONS 7

YOUR REMOTE CONTROL 7SERVICE MODE ADJUSTMENT 8ASSEMBLY ADJUSTMENT 10

SCHEMATIC DIAGRAM 13ELECTRICAL PARTS LIST 17DIFFERENT PARTS LIST 37EXPLODE VIEW 42PRINTED CIRCUIT BOARD 45

IC DESCRIPTION 48WAVEFORMS 54TROUBLE SHOOTING GUIDE 57

NO POWER 57NO PICTURE 58NO SOUND 59CH DON’T STOP 60NO COLOR 61NO VERTICAL DEFLECTION 61NO ON-SCREEN DISPLAY 62NO REMOCON RECEIPT 62

TABLE OF CONTENTS

APPENDIX(Appendix is provide only by internet[http://svc.dwe.co.kr])

-2-

SAFETY PRECAUTIONS

CAUTION : DO NOT ATTEMPT TO MODIFY THIS PRODUCT IN ANY WAY.NEVER PERFORM CUSTOMIZED INSTALLATIONS WITHOUT MANUFAC-TURER'S APPROVAL. UNAUTHORIZED MODIFICATIONS WILL NOT ONLY VOIDTHE WARRANTY, BUT MAY LEAD TO YOUR BEING LIABLE FOR ANT RESULT-ING PROPERTY DAMAGE OR USER INJURY.SERVICE WORK SHOULD BE PERFORMED ONLY AFTER YOU ARE THOR-OUGHLY FAMILIAR WITH ALL OF THE FOLLOWING SAFETY CHECKS ANDSERVICING GUIDELINES. TO DO OTHERWISE, INCREASES THE RISK OFPOTENTIAL HAZARDS AND INJURY TO THE USER.WHILE SERVICING, USE AN ISOLATION TRANSFORMER FOR PROTECTIONFROM A.C. LINE SHOCK.

SAFETY CHECKS

AFTER THE ORIGINAL SERVICE PROBLEM HAS BEEN CORRECTED, A CHECKSHOULD BE MADE OF THE FOLLOWING:

SUBJECT:FIRE & SHOCK HAZARD

1. BE SURE THAT ALL COMPONENTS ARE POSITIONED IN SUCH A WAY ASTO AVOID POSSIBILITY OF ADJACENT COMPONENT SHORTS. THIS ISESPECIALLY IMPORTANT ON THOSE MODULES WHICH ARE TRANS-PORTED TO AND FROM THE REPAIR SHOP.

2. NEVER RELEASE A REPAIR UNLESS ALL PROTECTIVE DEVICES SUCH ASINSULATORS, BARRIERS, COVERS, SHIELDS, STRAIN RELIEFS, POWERSUPPLY CORDS, AND OTHER HARDWARE HAVE BEEN REINSTALLED PERORIGINAL DESIGN. BE SURE, THAT THE SAFETY PURPOSE OF THEPOLARIZED LINE PLUG HAS NOT BEEN DEFEATED.

3. SOLDERING MUST BE INSPECTED TO DISCOVER POSSIBLE COLD SOL-DER JOINTS, SOLDER SPLASHES OF SHARP SOLDER POINTS. BE CER-TAIN TO REMOVE ALL LOOSE FOREIGN PARTICLES.

4. CHECK FOR PHYSICAL EVIDENCE OF DAMAGE OR DETERIORATION TOPARTS AND COMPONENTS, FOR FRAYED LEADS, DAMAGED INSULATION(INCLUDING A.C. CORD), AND REPLACE IF NECESSARY. FOLLOW ORIGI-NAL LAYOUT, LEAD LENGTH AND DRESS.

5. NO LEAD OR COMPONENT SHOULD TOUCH A RECEIVING TUBE OR ARESISTOR RATED AT 1 WATT OR MORE. LEAD TENSION AROUND PRO-TRUDING METAL SURFACES MUST BE AVOIDED.

6. ALL CRITICAL COMPONENTS SUCH AS FUSES, FLAMEPROOF RESISTOR,CAPACITORS, ETC. MUST BE REPLACED WITH EXACT FACTORY TYPES.DO NOT USE REPLACEMENT COMPONENTS OTHER THAN THOSE SPECI-FIED OR MAKE UNRECOMMENDED CIRCUIT MODIFICATIONS.

7. AFTER RE-ASSEMBLY OF THE STE ALWAYS PERFORM AN A.C. LEAKAGETEST ON ALL EXPOSED METALLIC PARTS OF THE CABINET. (THE CHAN-NEL SELECTOR KNOB, ANTENNA TERMINALS, HANDLE AND SCREWS) TOBE SURE THE SET IS SAFE TO OPERATE WITHOUT DANGER OF ELECTRI-CAL SHOCK. DO NOT USE A LINE ISOLATION TRANSFORMER DURING THISTEST USE AN A.C. VOLTMETER, HAVING 5000 OHMS PER VOLT OR MORESENSITIVITY, IN THE FOLLOWING MANNER : CONNECT A 1500 OHM 10WATT RESISTOR, PARALLELED BY A .15 MFD. 150V A.C. TYPE CAPACI-TOR BETWEEN A KNOWN GOOD EARTH GROUND (WATER POPE, CON-DUIT, ETC.) AND THE EXPOSED METALLIC PARTS, ONE AT A TIME.MEASURE THE A.C. VOLTAGE ACROSS THE COMBINATION OF 1500 OHMRESISTOR AND .15 MFD CAPACITOR. REVERSE THE A.C. PLUG ANDREPEAT A.C. VOLTAGE MEASUREMENTS FOR EACH EXPOSED METALLICPART. VOLTAGE MEASURED MUST NOT EXCEED .75 VOLTS R.M.S THISCORRESPONDS TO 0.5 MILLIAMP A.C. NAY VALUE EXCEEDING THIS LIMITCONSTITUTES A POTENTIAL SHOCK HAZARD AND MUST BE CORRECTEDIMMEDIATELY.

SUBJECT : X-RADIATION

1. BE SURE PROCEDURES AND INSTRUCTIONS TO ALL SERVICE PERSON-NEL COVER THE SUBJECT OF X-RADIATION. THE ONLY POTENTIALSOURCE OF X-RAYS IN CURRENT T.V. RECEIVERS IS THE PICTURE TUBE.HOWEVER, THIS TUBE DOES NOT EMIT X-RAYS WHEN THE HIGH VOLT-AGE IS AT THE FACTORY SPECIFIED LEVEL. THE PROPER VALUE IS GIVENIN THE APPLICABLE SCHEMATIC. OPERATION AT HIGHER VOLT-AGES MAYCAUSE A FAILURE OF THE PICTURE TUBE OR HIGH VOLTAGE SUPPLYAND UNDER CERTAIN CIRCUMSTANCES, AMY PRODUCE RADIA-TION INEXCESS OF DESIRABLE LEVELS.

2. ONLY FACTORY SPECIFIED C.R.T ANODE CONNECTORS MUST BEUSED.DEGAUSSING SHIELDS ALSO SERVE AS X-RAY SHIELD IN COLORSETS. ALWAYS RE-INSTALL THEM.

3. IT IS ESSENTIAL THAT SERVICE PERSONNEL HAVE AVAILABLE AN ACCU-RATE AND RELIABLE HIGH VOLTAGE METER. THE CALIBRATION OF THEMETER SHOULD BE CHECKED PERIODICALLY AGAINST A REFERENCESTANDARD. SUCH AS THE ONE AVAILABLE AT YOUR DISTRIBUTOR.

4. WHEN THE HIGH VOLTAGE CIRCUITRY IS OPERATING PROPERLY THEREIS NO POSSIBILITY OF AN X-RADIATION PROBLEM. EVERY TIME A COLORCHASSIS IS SERVICED, THE BRIGHTNESS SHOULD BE RUN UP AND DOWNWHILE MONITORING THE HIGH VOLTAGE WITH A METER TO BE CERTAINTHAT THE HIGH VOLTAGE DOES NOT EXCEED THE SPECIFIED VALUE ANDTHAT IT IS REGULATING CORRECTLY. WE SUGGEST THAT YOU AND YOURSERVICE ORGANIZATION REVIEW TEST PROCEDURES SO THAT VOLTAGEREGULATION IS ALWAYS CHECKED AS A STANDARD SERVICINGPROCEDURE, AND THAT THE HIGH VOLTAGE READING BE RECORDED ONEACH CUSTOMER’S INVOICE.

5. WHEN TROUBLESHOOTING AND MAKING TEST MEASUREMENTS IN APRODUCT WITH A PROBLEM OF EXCESSIVE HIGH VOLTAGE, AVOID BEINGUNNECESSARILY CLOSE TO THE PICTURE TUBE AND THE HIGH VOLTAGESUPPLY. DO NOT OPERATE THE PRODUCT LONGER THAN IS NECESSARYTO LOCATE THE CAUSE OF EXCESSIVE VOLTAGE.

6. REFER TO HV, B+ AND SHUTDOWN ADJUSTMENT PROCEDURESDESCRIBED IN THE APPROPRIATE SCHEMATIC AND DIAGRAMS (WHEREUSED).

SUBJECT : IMPLOSION

1. ALL DIRECT VIEWED PICTURE TUBES ARE EQUIPPED WITH AN INTEGRAIMPLOSION PROTECTION SYSTEM. BUT CARE SHOULD BE TAKEN TOAVOID DAMAGE DURING INSTALLATION. AVOID SCRATCHING THE TUBE.OF SCRATCHED REPLACE IT.

2. USE ONLY RECOMMENDED FACTORY REPLACEMENT TUBES.

SUBJECT : TIPS ON PROPER INSTALLATION

1. NEVER INSTALL ANY PRODUCT IN A CLOSED-IN RECESS, CUBBYHOLE ORCLOSELY FITTING SHELF SPACE, OVER OR CLOSE TO HEAT DUCT, OR INTHE PATH OF HEATED AIR FLOW.

2. AVOID CONDITIONS OF HIGH HUMIDITY SUCH AS: OUTDOOR PATIOINSTALLATIONS WHERE DEW IS A FACTOR, NEAR STEAM RADIATORSWHERE STEAM LEAKAGE IS A FACTOR, ETC.

3. AVOID PLACEMENT WHERE DRAPERIES MAY OBSTRUCT REAR VENTING.THE CUSTOMER SHOULD ALSO AVOID THE USE OF DECORATIVESCARVES OR OTHER COVERINGS WHICH MIGHT OBSTRUCT VENTILA-TION.

4. WALL AND SHELF MOUNTED INSTALLATIONS USING A COMMERCIALMOUNTING KIT, MUST FOLLOW THE FACTORY APPROVED MOUNTINGINSTRUCTIONS. A PRODUCT MOUNTED TO A SHELF OR PLATFORM MUSTRETAIN ITS ORIGINAL FEET (OR THE EQUIVALENT THICKNESS IN SPAC-ERS)TO PROVIDE ADEQUATE AIR FLOW ACROSS THE BOTTOM, BOLTS ORSCREWS USED FOR FASTENERS MUST NOT TOUCH ANY PARTS ORWIRING. PERFORM LEAKAGE TEST ON CUSTOMIZED INSTALLATIONS.

5. CAUTION CUSTOMERS AGAINST THE MOUNTING OF A PRODUCT ONSLOPING SHELF OR A TILTED POSITION, UNLESS THE PRODUCT ISPROPERLY SECURED.

6. A PRODUCT ON A ROLL-ABOUT CART SHOULD BE STABLE ON ITS MOUNT-ING TO THE CART. CAUTION THE CUSTOMER ON THE HAZARDS OF TRY-ING TO ROLL A CART WITH SMALL CASTERS ACROSS THRESHOLDS ORDEEP PILE CARPETS.

7. CAUTION CUSTOMERS AGAINST THE USE OF A CART OR STAND WHICHHAS NOT BEEN LISTED BY UNDERWRITERS LABORATORIES. INC. FORUSE WITH THEIR SPECIFIC MODEL OF TELEVISION RECEIVER ORGENERICALLY APPROVED FOR USE WITH T.V.S OF THE SAME OR LARGERSCREEN SIZE.

8. CAUTION CUSTOMERS AGAINST THE USE OF EXTENSION CORDS,EXPLAIN THAT A FOREST OF EXTENSIONS SPROUTING FROM A SINGLEOUTLET CAN LEAD TO DISASTROUS CONSEQUENCES TO HOME ANDFAMILY.

THE LIGHTNING FLASH WITH ARROWHEAD SYMBOL,WITHIN AN EQUILATERAL TRIANGLE, IS INTENDED TOALERT THE SERVICE PERSONNEL TO THE PRES-ENCEOF UNINSULATED “DANGEROUS VOLTAGE” THAT MAY BE OF SUFFICIENT MAGNITUDE TO CON-STITUTE A RISK OF ELECTRIC SHOCK.

THE EXCLAMATION POINT WITHIN AN EQUILATERALTRIANGLE IS INTENDED TO ALERT THE SERVICEPERSONNEL TO THE PRESENCE OF IMPORTANTSAFETY INFORMATION ON SERVICE LITERATURE.

SUBJECT : GRAPHIC SYMBOLS

10WATT

GOOD EARTH GROUNDSUCH AS THE WATERPIPE, CONDUIT, ETC.

1500 OHM

A.C. VOLTMETER

PLACE THIS PROBEON EACH EXPOSEDMETAL PART

0.15 uF

-3-

SAFETY PRECAUTIONS

CAUTION : Do not attempt to modify this product in any way. Unau-thorized modifications will not only void the warranty, but may lead to yourbeing liable for any resulting property damage or user injury.Service work should be performed only after you are thoroughly familiarwith all of the following safety checks and servicing guide-lines. To dootherwise, increases the risk of potential hazards and injury to the user.

SAFETY CHECKS

After the original service problem has been corrected, a check should bemade of the following:

SUBJECT : FIRE & SHOCK HAZARD

1. Be sure that all components are positioned in such a way as to avoidpossibility of adjacent component shorts. This is especially important onthose chassis which are transported to and from the repair shop.

2. Never release a repair unless all protective devices such as insula-tors,barriers, covers, shields, strain reliefs, and other hardware have beenreinstalled per original design.

3. Soldering must be inspected to discover possible cold solder joints,frayed leads, damaged insulation (including A.C. cord), solder splashesor sharp solder points. Be certain to remove all loose for-eign particals.

4. Check for physical evidence of damage or deterioration to parts andcomponents, and replace if necessary follow original layout, lead lengthand dress.

5. No leads or components should touch a receiving tube or a resistorrated at 1 watt or more. Lead tension around protruding metal sur-facesmust be avoided.

6. All critical components such as fuses, flameproof resistors, capaci-tors,etc. must be replaced with exact factory types. Do not use replacementcomponents other than those specified or make unrecommended circuitmodifications.

7. After re-assembly of the set always perform an A.C. leakage test on allexposed metallic parts of the cabinet, (the channel selector knob,antenna terminals, handle and screws) to be sure the set is safe tooperate without danger of electrical shock. Do not use a line isolationtransformer during this test. Use an A.C. voltmeter, having 5000 ohmsper volt or more sensitivity, in the following manner : connect a 1500ohm 10 watt resistor, paralleled by a 15 mfd. 150V A.C. type capacitorbetween a known good earth ground (9water pipe, conduit, etc.) andthe exposed metallic parts, one at a time. Measure the A.C. voltageacross the combination of 1500 ohm resistor and 0.15 MFD capacitor.Reverse the A.C. plug and repeat A.C. voltage measurements for eachexposed metallic part. Voltage measured must not exceed 0.75 voltsR.M.S. This corresponds to 0.5 milliamp A.C. Any value exceeding thislimit constitutes a potential shock hazard and must be corrected imme-diately.

The lightning flash with arrowhead symbol,within an equilateral triangle, is intended to alertthe service personnel to the presence of uninsu-lated “dangerous voltage” that may be of suffi-cienty magnitude to constitute a risk of electricshock.

The exclamation point within an equilateral tri-angle is intended to alert the service personnelto the presence of important safety informationin service literature.

Fuse symbol is printed on pcb adjacent to thefuse, with “RISK OF FIRE REPLACE FUSE ASMARKED”. The symbol is explained in the ser-vice manual with the following wording or equiv-alent.

“CAUTION : FOR CONTINUED PROTECTION AGAINST FIREHAZARD, REPLACE ONLY WITH SAME TYPE (4A, 125V)” and“ATTENTION: AFIN D’ASSU UNE PROTECTION PERMANENTECONTRE LES RISQUES D’INCENDIE, REMPLACER UNIQUE-MENTPAR UN FUSIBLE DE MEME TYPE ET DE ”4A, 125V”.

SUBJECT : X-RADIATION

1. Be sure procedures and instructions to all service personnel coverthe subject of X-rays in current T.V. receivers is the picture tube.However, this tube does not emit X-rays when the high voltage is atthe factory specified level. The proper value is given in the appli-cable schematic. Operation at higher voltages may cause a failureof the picture tube or high voltage supply and, under certain cir-cumstances, may produce radiation in excess of desirable levels.

2. Only factory specified C.R.T. anode connectors must be used.Degaussing shields also serve as X-ray shield in color sets. Alwaysre-install them.

3. It is essential that the serviceman has available an accurate andreliable high voltage meter. The calibration of the meter should bechecked perio - dically against a reference standard. Such as theone available at your distributor.

4. When the high voltage circuitry is operating properly there is nopossibility of an X-radiation problem. Every time a color chassis isserviced, the brightness should be run up and down while monitor-ing the high voltage with a meter to be certain that the high voltagedoes not exceed the specified value and that it is regulating cor-rectly. We suggest that you and your service organization reviewtest procedures so that voltage regulation is always checked as astandard servicing procedure. And that the high voltage reading berecorded on each customer’s invoice.

5. When troubleshooting and making test measurements in a receiverwith a problem of excessive high voltage, avoid being unnecessarilyclose to the picture tub eand the high voltage compartment. Do notoperate the chassis longer than is necessary to locate the cause ofexcessive voltage.

6. Refer to HV, B+and Shutdown adjustment procedures described inthe appropriate schematic and diagrams(where used).

10WATT

GOOD EARTH GROUNDSUCH AS THE WATERPIPE, CONDUIT, ETC.

1500 OHM

A.C. VOLTMETER

PLACE THIS PROBEON EACH EXPOSEDMETAL PART

0.15 uF

-4-

SAFETY PRECAUTIONS

SUBJECT : IMPLOSION

1. All direct viewed picture tubes are equipped with an integral implo-sion protection system, but care should be taken to avoid damageduring installation. Avoid scratching the tube. If scratched, replace it.

2. Use only recommended factory replacement tubes.

SUBJECT : TIPS ON PROPER INSTALLATION

1. Never install any receiver in closed-in recess, cubbyhole or closelyfitting shelf space over, or close to heat duct, or in the path ofheated air flow.

2. Avoid conditions of high humidity such as : Outdoor patio installa-tions where dew is a factor. Near steam radiators where steamleakage is a factor, etc.

3. Avoid placement where draperies may obstruct rear venting. Thecustomer should also avoid the use of decorative scarves or othercoverings which might obstruct ventilation.

4. Wall and shelf mounted installations using a commercial mountingkit, must follow the factory approved mounting instructions. Areceiver mounted to a shelf or platform must retain its originalfeet(or the equivalent thickness in spacers) to provide adequate areflow across the bottom, bolts or screws used for fasteners must nottouch and parts or wiring. Perform leakage test on cus-tomizedinstallations.

5. Caution customers against the mounting of a receiver on slopingshelf or a tilted position, unless the receiver is properly secured.

6. A receiver on a roll-about cart should be stable on its mounting tothe cart. Caution the customer on the hazards of trying to roll a cartwith small casters across thresholds or deep pile carpets.

7. Caution customers against the use of a cart or stand which has notbeen listed by underwriters laboratories, inc. For use with theirspecific model of television receiver or generically approved for usewith T.V.’s of the same or larger screen size.

-5-

SPECIFICTION

ModelDTQ-20U4SC DTQ-2033SC DTQ-27U4SCItem

CHASSIS CN-230FTV Standard NTSC-MPower Input AC 120v, 60HzPower Consumption 90W 120WTuning System Frequency Synthesizer(FS) Tuning SystemTuning Ranges TV VHF(L) : CH2 - CH6

UHF(H) : CH7 - CH13UHF : CH14 - CH69CATV VHF(L) : 5A, A,B,A-5-A-1

CH2-CH6VHF(H) : C-W+11

CH7 - CH13UHF : W+12-W+84”

Sound Output 3W + 3W 5W + 5WSpeaker 8 ohm 3W x 2EA 8 ohm 7W x 2EAAntenna Input Impedance 75 ohm UnbalancedAuxiliary Input Terminal Front : Video, Audio(L,R) - AV3

Rear : Video, Audio(L,R) - AV1Video, Audio(L,R) - AV2Y, Cb, Cr, Audio(L,R) - CVI

Auxiliary Output Terminal Rear : Video, Audio(L,R) - MONITOR OUTIntermediate Frequencies Picture IF Carrier Frequency : 45.75MHz

Sound IF Carrier Frequency : 41.25MHzColor Sub-Carrier Frequency : 3.579545MHz

Remote Control R-43A07Special Function 1) Closed Caption

2) V-Chip3) Channel Label

-6-

CIRCUIT BLOCK DIAGRAM

-7-

ALIGNMENT INSTRUCTION

1. POWER use this button to turn your TV on or off.

2. MUTE Use to turn the TV's sound on and off.

3. CH Use these buttons to change your TV's volume, to activate selections in the menu system.

4. VOL Use thesebuttons to change your TV's volume, to activate selections in the meny system, or to change audio and video settings.

5. MENU Use this button to turn the TV's menu system on and off.

6. DISPLAY Use this button to display the channel numbeer and status.

7. INPUT Use this button to select the TV's signal source.

8. VIDEO Use this button to display video adjustment.

9. 0-9 Use these buttons to change channels.

10. SLEEP Use this button to program the TV to turn off after a certain time.

11. PREVIOUS Use this button to return to the previous channel you were watching.

1

3

4

11

8

7

2

4

53

9

10

6

POWERMUTE

MENU

CH

SLEEP PREVIOUS

VIDE OINPU TDISPLAY

1 2 3

4 5 6

7 8

0

9

VOL VOL

Your Remote Control(R-43A07)

-8-


1. SERVICE MODE ADJUSTMENTSFollow the steps below whenever service adjustment is required. See Table- A and Table- B to determine if

service adjustments are required.

1) How to enter the service mode using the user remote control.

• Turn the set on.

• Direct the remote control to the reception window of TV.

• Push buttons of remote control in sequence as follows.

1 MUTE DISPLAY MUTE

• Then, the screen will appear as follows.

• Using the channel up or channel down button, select the item you wish to adjust.

(The color of selected item turns into the red.)

• Press the volume up or down button to enter in the service mode you wish to adjust.

2) How to memorize the adjusted values in the service mode.

• Must press DISPLAY button the state which the screen is displaying each of service menus

after all adjustments are completed each of all service menu.

Table-A : Adjust the values of service mode when a part is replaced.

PARTREPLACED

ADJUSTMENTNOTES

NECESSARY UNNECESSARY

I701(U-COM)

OData is stored in I703.

I101(MAIN)

O

I703(EEPROM)

Initial setting values are written from I701.ADJUSTING ITEMS

S5 : SOUND CONTROL O S6 : H.PHASE/H.SIZE/V.POSI/V.SIZE

S8 : RD/GD/BD/RB/GB/BB S9 Subbrightness

CRT O Adjust items related to picture tube only.(White Balance adjustment)

S2 SCRNS5 SNDS6 GEO

VDPS7 S8 W/BS9 DPS12 FACT

-9-


MODE ADJUSTMENT DATA REMARKSINITIAL20” INITIAL 27” RANGE

S2 Screen AdjustmentS5 SOUND CONTROL

FM/AM PRE 55 55 0~127SCART PRE 49 51 0~127MONI VOL 38 45 0~127QUASI CHECK NO NO YES/NONO SD NO POWER NO NO YES/NO

S6 V-SIZE 387 416 0~510 *V-POSI 1312 1280 240~1712 *H-PHASE 43 43 0~255 *H-SIZE 2182 676 4~4092 *V-LIN 258 239 0~511 *V-S 243 236 2~512HBST 267 267 0~511TILT 512 392 8~1016 **P-PARA 512 645 3~1021 **H-SYM 1024 1048 8~2040 **H-COR 1024 904 8~2040 **HBSO 367 367 0~511

S7 BCLTH 130 150 0~2047BCLTM 5 8 0~15BCLG 5 6 0~15BCLTST 0 0 0~1020PKINV 0 0 0/1BLE 1 1 0/1BTLT 8 0 0~15BAM 12 9 0~31SVG1 20 20 0~63SVD1 7 2 0~7SVLIM 127 100 0~127SVDEL 0 7 0~15OSDBR 130 255 0~511OSDCO 130 120 0~511

S8-1 RD 700 800 0~1023 *GD 700 800 0~1023 *BD 700 800 0~1023 *RB 350 350 0~511 *GB 350 350 0~511 *BB 350 350 0~511 *

S8-2 SCR R-BIAS 0 0 0~511SCR G-BIAS 0 0 0~511SCR B-BIAS 450 470 0~511SCR R-DRIVE 0 0 0~1023SCR G-DRIVE 0 0 0~1023SCR B-DRIVE 200 200 0~1023

S9 DP-BRI 160 160 0~310 *DP-CONT 5 13 0~13DP-TINT 150 200 0~222DP-COL 0 100 0~850DP-OVPK 0 0 0~4DP-UNPK 2 2 0~4BRI-SET 74 80 0~100

S11 DVCO OK OK *S12 Forwarding Mode Factory initialization

Table-B

* indicates the items with different settings each of sets (20”& 27”)** indicates the items with different settings each of sets (only 27””)

-10-


2) FOCUS ADJUSTMENT

• Turn in a local station and adjust the Focus Control knob (located on FBT) for best picture

details at high light condition.

3) GEOMETRIC ADJUSTMENTS (S6)

• Select service adjustment S6

• You can see the OSD as shown in below.

3-1. Horizontal Position Adjustment

• Select H-PHASE item, adjust H-PHASE data value to obtain proper horizontal centering of the

internal cross pattern at the left and right of the screen.

3-2. Vertical Position Adjustment

• Select V-POSI item, adjust V-POSI data value to center the raster properly on the screen.

2. ASSEMBLY ADJUSTMENTS1) SCREEN ADJUSTMENT (S2)

• Enter the service mode and select service adjustment S2.

• You can see the one horizontal line on the screen.

• Adjust the Screen Control Volume (located on FBT) so that the horizontal line onscreen may be

disappeared.

• Press the volume up or down button to exit in the screen adjustment mode.

IN THE SCREEN ADJUSTMENT MODE, DONT PRESS OTHER BUTTONS EXCEPT VOLUME UP OR DOWN BUTTON.

CAUTION

V-SIZE

V-POSI

H-PHASE

H-SIZE

V-LIN

V-S

HBST

TILT

P-PARA

H-SYM

H-COR

HBSO

392�

645�

1048�

904�

367

416�

1280�

43�

676�

239�

236�

267

-11-


3-3. Vertical Size Adjustment

• Select “V.SIZE” item, adjust “V.SIZE” data value to proper vertical size as follows.

4) WHITE BALANCE ADJUSTMENT(S8)

• Receive a good local channel.



• Using volume up or volume down, adjust service adjustment data of RD/GD/BD and RB/GB/BB until a good gray

scale with normal whites is obtained.ALIGNMENT INSTRUCTIONS

• Press the DISPLAY button to memorize the data.

5) DIGITAL PRESET(D.P) ADJUSTMENTS(S9)

SUBBRIGHTNESS ADJUSTMENT

• Receive a good local channel.



RD 800

GD 800

BD 800

RB 350

GB 350

BB 350

MOVE ADJUST RECALL : SET

DP-BRI 160

DP-CONT 13

DP-TINT 200

DP-COL 100

DP-OVPK 0

DP-UNPK 2

BRI-SET 80

MOVE ADJUST RECALL : SET

-12-


• Select Subbrightness item, adjust Subbrightness data value to obtain normal brightness level.

• Press the DISPLAY button to memorize the data.

CONTRAST

• Fixed value = 13

TINT


COLOR


6) FACTORY OUTGOING MODE (S12 : FACT)

• If you select the S12, then the set becomes factory outgoing status.

• You can see the OSD “outgoing OK”

-13-

SCHEMATIC DIAGRAM

20U4(SHEET-1)

-14-

SCHEMATIC DIAGRAM

20U4 (SHEET-2)

-15-

SCHEMATIC DIAGRAM

27U4(SHEET-1)

-16-

SCHEMATIC DIAGRAM

27U4(SHEET-2)

-17-

ELECTRICAL PARTS LIST

1 ZZ100 48B4343A07 TRANSMITTER REMOCON R-43A07 (AA)2 ZZ110 PTACPWJ954 ACCESSORY AS DTQ-21U4SC3 M821 4858213801 BAG INSTRUCTION L.D.P.E T0.05X250X4004 ZZ120 PTBCSHJ954 COVER BACK AS DTQ-21U4SC5 M211 4852161700 COVER BACK FR HIPS GY 21U46 M781 4857817630 CLOTH BLACK FELT 400X20X0.77 ZZ130 PTPKCPJ954 PACKING AS DTQ-21U4SC8 10 6520010100 STAPLE PIN AUTO W659 M801 4858061500 BOX CARTON DW-3 21U410 M811 4858100B00 PAD EPS 21U411 M821 4858219101 BAG P.E P.E FOAM T0.5X1300X115012 ZZ131 48519A7110 CRT GROUND NET 2101F-1015-1P13 ZZ132 58G0000154 COIL DEGAUSSING DC-21F114 ZZ140 PTCACAJ954 CABINET AS DTQ-21U4SC15 M201A 4856013300 SCREW CRT FIXING 30X80 BK16 M201B 4856013302 SCREW CRT FIXING 30X190 BK17 M201C 4856219502 WASHER RUBBER CR T2.0 BLACK18 M211A 7172401412 SCREW TAPPTITE TT2 TRS 4X14 MFZN BK19 M211B 7178301212 SCREW TAPPTITE TT2 WAS 3X12 MFZN BK20 M541 4855415800 SPEC PLATE 150ART P/E FILM (C/TV)21 SP01A 7178301011 SCREW TAPPTITE TT2 WAS 3X10 MFZN22 SP02A 7178301011 SCREW TAPPTITE TT2 WAS 3X10 MFZN23 V901 4859636160 CRT A51QDK090X030 P3824 ZZ200 PTFMSJJ954 MASK FRONT AS DTQ-21U4SC25 M191 4851948100 BUTTON CTRL AS 4952500+554680026 M191A 7178301011 SCREW TAPPTITE TT2 WAS 3X10 MFZN27 M201 4852081000 MASK FRONT FR HIPS GY 21U428 M481 4854862100 BUTTON POWER FR ABS GY 21U429 M481A 4856716000 SPRING SWPA PIE0.530 M561 4855617500 MARK BRAND CU AU+ABS BK31 ZZ210 PTSPPWJ954 SPEAKER AS DTQ-21U4SC32 PA601 4850704S27 CONNECTOR YH025-04+YRT205+ULW=40033 SP01 4858314010 SPEAKER SP-5070F01 3W 8 OHM34 SP02 4858314010 SPEAKER SP-5070F01 3W 8 OHM35 ZZ290 PTMPMSJ954 PCB MAIN MANUAL AS DTQ-21U4SC36 10 2193102005 SOLDER BAR SN:PB=63:47 S63S-132037 30 2291050616 FLUX SOLDER JS-64T338 40 2291050301 FLUX SOLVENT IM-100039 C212 CCZB1H181K C CERA 50V B 180PF K (AXIAL)40 C310 CEXF1E222V C ELECTRO 25V RSS 2200MF (16X25) TP

NO LOC PARTS CODE PARTS NAME PARTS DESCRIPTION REMARK

**This BOM is based on DTQ-20U4SC

"!" is a safety part, so it must be used the same part."R" is a recommendable part for essential stock.

CAUTION

✔ In this Service Manual, some parts can be changed for improving, their performance without notice in the parts list. So, if you need thelatest parts information, please refer to PPL(Parts Price List) in Service information Center(http://svc.dwe.co.kr)

-18-


41 C331 CEYD1H689W C ELECTRO 50V RHD 6.8MF (16X35.5)42 C404 CMYH3C912J C MYLAR 1.6KV BUP 9100PF J43 C406 CMYE2G364J C MYLAR 400V PU 0.36MF J44 C801 CL1UC3104M C LINE ACROSS WORLD AC250V 0.1UF M R.4745 C804 CEYN2D331P C ELECTRO 200V LHS 330MF 46 C812 CEYF1E332V C ELECTRO 25V RSS 3300MF (16X31.5)47 C814 CEYF2C221V C ELECTRO 160V RSS 220MF (18X35.5)48 C852 CEYF1V222V C ELECTRO 35V RSS 2200MF (16X31.5)49 D419 DRGP30J—- DIODE RGP30J50 D424 DDG3——— DIODE DG351 D703 DLH2PR—— LED BLOCK LH-2P-R52 D801 DPBS606GU- DIODE BRIDGE PBS606G53 D807 DRGP30J—- DIODE RGP30J54 D842 DRGP30J—- DIODE RGP30J55 F801 5F1GB5021L FUSE GLASS TUBE CSA/UL 125V 5A56 I201 1MM1118—- IC A/V SWITCH MM111857 I301 PTF2SW7921 HEAT SINK ASS`Y 1LA7848—- + 717430081158 00001 1LA7848—- IC VERTICAL LA784859 0000A 4857027921 HEAT SINK AL EX BK60 0000B 7174300811 SCREW TAPPTITE TT2 RND 3X8 MFZN61 I401 PTM2SW6902 HEAT SINK ASS`Y 1K78R05—- + 717430081162 00001 1K78R05—- IC REGULATOR KIA78R05PI63 0000A 4857026902 HEAT SINK AL EX BK64 0000B 7174300811 SCREW TAPPTITE TT2 RND 3X8 MFZN65 I501 1VDP3130Y- IC VDP3130Y66 I502 1LP295033- IC REGULATOR LP2950 3.3V67 I601 1MSP3420V3 IC SOUND PROCESSOR MSP3420G-PP-B8-V368 I602 PTG2SW8210 HEAT SINK ASS`Y 1TDA8944J- + 717430081169 00001 1TDA8944J- IC SOUND TDA8944J70 0000A 4857028210 HEAT SINK AL EX71 0000B 7174301011 SCREW TAPPTITE TT2 RND 3X10 MFZN72 I701 1DW8638TA1 IC MICOM LC863856A-51S273 I703 124LC16B1B IC MEMORY 24LC16B1B74 I801 PTD2SW7720 HEAT SINK ASS`Y 1MR2520—- + 717430081175 00001 1MR2520—- IC POWER MR252076 0000A 4857027720 HEAT SINK AL EX 77 0000B 7174300811 SCREW TAPPTITE TT2 RND 3X8 MFZN78 I803 1KA431L—- IC KA431L79 I804 1LTV817C— IC PHOTO COUPLER LTV-817C80 I805 1LTV817C— IC PHOTO COUPLER LTV-817C81 IL701 1KRT30—— IC PREAMP KRT3082 JP01 4859111550 JACK PIN BOARD YPJ501B83 JP02 4859106440 JACK S-VHS PH-SJ-950384 JP03 4859108850 JACK PIN BOARD PH-JB-951285 JP04 4859108450 JACK PIN BOARD YSC03P-4120-14A


-19-


86 JP05 4859102130 JACK EARPHONE YSC-153787 L301 58C7070085 COIL CHOKE TLN-3062A88 L401 58H0000020 COIL H-LINEARITY L-76(76.5UH)89 L801 5PLF24A3— FILTER LINE LF-24A390 P502 4859235320 CONN WAFER YW025-1091 PWC1 4859907810 CORD POWER AS ME301P+TER=210092 Q402 PTE2SW7609 HEAT SINK ASS`Y TKSC5386— + 717430081193 00001 TKSC5386— TR HORI KSC538694 0000A 4857027609 HEAT SINK AL EX95 0000B 7174300811 SCREW TAPPTITE TT2 RND 3X8 MFZN96 R420 RD-4Z302J- R CARBON FILM 1/4 3K OHM J97 R555 RD-AZ560J- R CARBON FILM 1/6 56 OHM J98 R801 RX10B109JQ R CEMENT 10W 1 OHM J BEN 25MM 4P99 R805 RW02Z128KS R WIRE WOUND 2W 0.12 OHM K SMALL

100 R882 DDB3R0M140 POSISTOR ECPBD3R0M140101 RLY1 5SC0101338 SW RELAY GJ-SS-105LM102 RS801 DSVC471D14 VARISTOR SVC471D14A103 SW707 5S50101035 SW TACT KPT-1112 1C-1P104 T401 50D10A3—- TRANS DRIVE TD-10A3105 T402 50H0000223 FBT FFA64717M106 T801 50M4242B9- TRANS SMPS TSM-4242B9107 U101 4859723230 TUNER VARACTOR 115-V-F025AR108 X501 5XE20R250E CRYSTAL QUARTZ HC-49/U 20.2500MHZ 30PPM109 X601 5XE18R432E CRYSTAL QUARTZ HC-49/U 18.43200MHZ 30PPM110 X701 5XYR03276C CRYSTAL QUARTZ C-001R 32.768000KHZ 20PPM111 ZZ200 PTMPJ0J954 PCB MAIN (RHU) AS DTQ-21U4SC112 C405 CEXA2D229E C ELECTRO 200V RUL 2.2MF (10X16) TP113 C409 CMXE2G273J C MYLAR 400V PU 0.027MF J (TP)114 C414 CEXF1V471V C ELECTRO 35V RSS 470MF (10X20) TP115 C415 CEXF1C102V C ELECTRO 16V RSS 1000MF (10X20) TP116 C420 CEXF2E220V C ELECTRO 250V RSS 22MF (13X20) TP117 C702 CEXF1C102V C ELECTRO 16V RSS 1000MF (10X20) TP118 C809 CBXB3D102K C CERA SEMI 2KV BL(N) 1000PF K (T)119 C813 CBXB3D471K C CERA SEMI 2KV BL(N) 470PF K (T)120 C815 CEXF2A470V C ELECTRO 100V RSS 47MF (10X16) TP121 C817 CBXB3D471K C CERA SEMI 2KV BL(N) 470PF K (T)122 C820 CEXF2C101V C ELECTRO 160V RSS 100MF (16X25) TP123 C832 CBXB3D471K C CERA SEMI 2KV BL(N) 470PF K (T)124 C842 CBXB3D471K C CERA SEMI 2KV BL(N) 470PF K (T)125 C880 CH1BEE472M C CERA AC U/C/V 2.5KV 4700PF TP 126 C881 CH1BEE472M C CERA AC U/C/V 2.5KV 4700PF TP 127 ZZ200 PTMPJBJ954 PCB MAIN M-10 AS DTQ-21U4SC128 10 2TM18006BE TAPE MASKING 6.2X500129 E002 4856310600 EYE LET BSR T0.2 (R2.3)130 E003 4856310600 EYE LET BSR T0.2 (R2.3)


-20-


131 E004 4856310600 EYE LET BSR T0.2 (R2.3)132 E005 4856310600 EYE LET BSR T0.2 (R2.3)133 E006 4856310600 EYE LET BSR T0.2 (R2.3)134 E007 4856310600 EYE LET BSR T0.2 (R2.3)135 E008 4856310600 EYE LET BSR T0.2 (R2.3)136 E009 4856310600 EYE LET BSR T0.2 (R2.3)137 E010 4856310600 EYE LET BSR T0.2 (R2.3)138 E011 4856310600 EYE LET BSR T0.2 (R2.3)139 E012 4856310300 EYE LET BSR T0.2 (R1.6)140 E013 4856310600 EYE LET BSR T0.2 (R2.3)141 E014 4856310600 EYE LET BSR T0.2 (R2.3)142 E015 4856310600 EYE LET BSR T0.2 (R2.3)143 E016 4856310600 EYE LET BSR T0.2 (R2.3)144 E017 4856310600 EYE LET BSR T0.2 (R2.3)145 E018 4856310600 EYE LET BSR T0.2 (R2.3)146 E020 4856310600 EYE LET BSR T0.2 (R2.3)147 E021 4856310600 EYE LET BSR T0.2 (R2.3)148 E022 4856310600 EYE LET BSR T0.2 (R2.3)149 E023 4856310600 EYE LET BSR T0.2 (R2.3)150 E025 4856310600 EYE LET BSR T0.2 (R2.3)151 E026 4856310600 EYE LET BSR T0.2 (R2.3)152 E027 4856310600 EYE LET BSR T0.2 (R2.3)153 E028 4856310600 EYE LET BSR T0.2 (R2.3)154 E030 4856310600 EYE LET BSR T0.2 (R2.3)155 E031 4856310600 EYE LET BSR T0.2 (R2.3)156 E032 4856310600 EYE LET BSR T0.2 (R2.3)157 E033 4856310600 EYE LET BSR T0.2 (R2.3)158 E034 4856310300 EYE LET BSR T0.2 (R1.6)159 E035 4856310300 EYE LET BSR T0.2 (R1.6)160 E036 4856310300 EYE LET BSR T0.2 (R1.6)161 E037 4856310300 EYE LET BSR T0.2 (R1.6)162 E038 4856310300 EYE LET BSR T0.2 (R1.6)163 E039 4856310300 EYE LET BSR T0.2 (R1.6)164 E040 4856310300 EYE LET BSR T0.2 (R1.6)165 E041 4856310300 EYE LET BSR T0.2 (R1.6)166 E042 4856310300 EYE LET BSR T0.2 (R1.6)167 E043 4856310300 EYE LET BSR T0.2 (R1.6)168 E044 4856310300 EYE LET BSR T0.2 (R1.6)169 E045 4856310300 EYE LET BSR T0.2 (R1.6)170 E046 4856310300 EYE LET BSR T0.2 (R1.6)171 E047 4856310300 EYE LET BSR T0.2 (R1.6)172 E048 4856310300 EYE LET BSR T0.2 (R1.6)173 E049 4856310300 EYE LET BSR T0.2 (R1.6)174 E051 4856310300 EYE LET BSR T0.2 (R1.6)175 E052 4856310300 EYE LET BSR T0.2 (R1.6)


-21-


176 E053 4856310300 EYE LET BSR T0.2 (R1.6)177 E056 4856310300 EYE LET BSR T0.2 (R1.6)178 E057 4856310300 EYE LET BSR T0.2 (R1.6)179 E058 4856310300 EYE LET BSR T0.2 (R1.6)180 E059 4856310300 EYE LET BSR T0.2 (R1.6)181 E060 4856310300 EYE LET BSR T0.2 (R1.6)182 E061 4856310300 EYE LET BSR T0.2 (R1.6)183 E062 4856310300 EYE LET BSR T0.2 (R1.6)184 E063 4856310300 EYE LET BSR T0.2 (R1.6)185 E064 4856310300 EYE LET BSR T0.2 (R1.6)186 E065 4856310300 EYE LET BSR T0.2 (R1.6)187 E066 4856310300 EYE LET BSR T0.2 (R1.6)188 E067 4856310300 EYE LET BSR T0.2 (R1.6)189 E068 4856310300 EYE LET BSR T0.2 (R1.6)190 E069 4856310300 EYE LET BSR T0.2 (R1.6)191 E074 4856310300 EYE LET BSR T0.2 (R1.6)192 E075 4856310300 EYE LET BSR T0.2 (R1.6)193 E076 4856310300 EYE LET BSR T0.2 (R1.6)194 E077 4856310300 EYE LET BSR T0.2 (R1.6)195 E078 4856310300 EYE LET BSR T0.2 (R1.6)196 E079 4856310300 EYE LET BSR T0.2 (R1.6)197 N005 4857417500 TERM PIN DA-IB0214(D2.3/DY PIN)198 N006 4857417500 TERM PIN DA-IB0214(D2.3/DY PIN)199 N401 4857417500 TERM PIN DA-IB0214(D2.3/DY PIN)200 N402 4857417500 TERM PIN DA-IB0214(D2.3/DY PIN)201 N403 4857417500 TERM PIN DA-IB0214(D2.3/DY PIN)202 N404 4857417500 TERM PIN DA-IB0214(D2.3/DY PIN)203 P601 485923172S CONN WAFER YW025-04 (STICK)204 R101 RS02Z910JS R M-OXIDE FILM 2W 91 OHM J SMALL205 R102 RS02Z910JS R M-OXIDE FILM 2W 91 OHM J SMALL206 R405 RS02Z241JS R M-OXIDE FILM 2W 240 0HM J SMALL207 R411 RS01Z229J- R M-OXIDE FILM 1W 2.2 OHM J (TAPPING)208 R412 RS01Z309J- R M-OXIDE FILM 1W 3 OHM J (TAPPING)209 R413 RS02Z109JS R M-OXIDE FILM 2W 1 OHM J SMALL210 R414 RS02Z109J- R M-OXIDE FILM 2W 1 OHM J (TAPPING)211 R419 RS02Z120JS R M-OXIDE FILM 2W 12 OHM J SMALL212 R617 RS02Z109JS R M-OXIDE FILM 2W 1 OHM J SMALL213 R814 RS02Z129JS R M-OXIDE FILM 2W 1.2 OHM J SMALL214 R815 RS02Z109JS R M-OXIDE FILM 2W 1 OHM J SMALL215 R817 RS02Z331JS R M-OXIDE FILM 2W 330 OHM J SMALL216 ZZ200 PTMPJRJ954 PCB MAIN RADIAL AS DTQ-21U4SC217 C101 CEXF1H100V C ELECTRO 50V RSS 10MF (5X11) TP218 C102 CEXF1C101V C ELECTRO 16V RSS 100MF (6.3X11) TP219 C201 CEXF1H100V C ELECTRO 50V RSS 10MF (5X11) TP220 C203 CEXF1H100V C ELECTRO 50V RSS 10MF (5X11) TP


-22-


221 C204 CEXF1H100V C ELECTRO 50V RSS 10MF (5X11) TP222 C210 CEXF1H470V C ELECTRO 50V RSS 47MF (6.3X11) TP223 C301 CMXM2A103J C MYLAR 100V 0.01MF J (TP)224 C302 CEXF1H479V C ELECTRO 50V RSS 4.7MF (5X11) TP225 C303 CEXF1H100V C ELECTRO 50V RSS 10MF (5X11) TP226 C305 CEXF1H101V C ELECTRO 50V RSS 100MF (8X11.5) TP227 C307 CXSL2H100D C CERA 500V SL 10PF D (TAPPING)228 C308 CMXM2A473J C MYLAR 100V 0.047MF J (TP)229 C311 CEXD1H109Q C ELECTRO 50V RT 1MF (6.3X11) TP230 C312 CEXF1H100V C ELECTRO 50V RSS 10MF (5X11) TP231 C315 CMXM2A153J C MYLAR 100V 0.015MF J (TP)232 C381 CMXM2A224J C MYLAR 100V 0.22MF J233 C401 CCXB2H102K C CERA 500V B 1000PF K (TAPPING)234 C402 CCXB2H561K C CERA 500V B 560PF K (TAPPING)235 C403 CCXF2H103Z C CERA HIKF 500V 0.01MF Z236 C411 CEXF1H100V C ELECTRO 50V RSS 10MF (5X11) TP237 C412 CCXB2H102K C CERA 500V B 1000PF K (TAPPING)238 C418 CMXM2A104J C MYLAR 100V 0.1MF J (TP)239 C437 CEXF1C221V C ELECTRO 16V RSS 220MF (8X11.5) TP240 C451 CEXF1C101V C ELECTRO 16V RSS 100MF (6.3X11) TP241 C461 CEXF1H100V C ELECTRO 50V RSS 10MF (5X11) TP242 C502 CCXB1H561K C CERA 50V B 560PF K (TAPPING)243 C503 CEXF1C470V C ELECTRO 16V RSS 47MF (5X11) TP244 C507 CEXF1C101V C ELECTRO 16V RSS 100MF (6.3X11) TP245 C512 CCXB1H122K C CERA 50V B 1200PF K (TAPPING)246 C513 CEXF1C470V C ELECTRO 16V RSS 47MF (5X11) TP247 C519 CEXF1H228V C ELECTRO 50V RSS 0.22MF (5X11) TP248 C521 CEXF1H228V C ELECTRO 50V RSS 0.22MF (5X11) TP249 C523 CEXF1H100V C ELECTRO 50V RSS 10MF (5X11) TP250 C525 CEXF1C470V C ELECTRO 16V RSS 47MF (5X11) TP251 C526 CCXB1H122K C CERA 50V B 1200PF K (TAPPING)252 C528 CEXD1H109F C ELECTRO 50V RND 1MF (5X11) TP253 C529 CEXF1H109V C ELECTRO 50V RSS 1MF (5X11) TP254 C530 CEXF1H109V C ELECTRO 50V RSS 1MF (5X11) TP255 C531 CEXD1H109F C ELECTRO 50V RND 1MF (5X11) TP256 C532 CMXM2A683J C MYLAR 100V 0.068MF J (TP)257 C534 CEXF1H339V C ELECTRO 50V RSS 3.3MF (5X11) TP258 C538 CMXM2A683J C MYLAR 100V 0.068MF J (TP)259 C606 CEXF1C470V C ELECTRO 16V RSS 47MF (5X11) TP260 C609 CEXF1H100V C ELECTRO 50V RSS 10MF (5X11) TP261 C610 CEXF1H338V C ELECTRO 50V RSS 0.33MF (5X11) TP262 C611 CEXF1H338V C ELECTRO 50V RSS 0.33MF (5X11) TP263 C612 CEXF1H338V C ELECTRO 50V RSS 0.33MF (5X11) TP264 C613 CEXF1H338V C ELECTRO 50V RSS 0.33MF (5X11) TP265 C614 CEXF1H338V C ELECTRO 50V RSS 0.33MF (5X11) TP


-23-


266 C615 CEXF1H338V C ELECTRO 50V RSS 0.33MF (5X11) TP267 C616 CEXF1H338V C ELECTRO 50V RSS 0.33MF (5X11) TP268 C617 CEXF1H338V C ELECTRO 50V RSS 0.33MF (5X11) TP269 C618 CEXF1H100V C ELECTRO 50V RSS 10MF (5X11) TP270 C620 CEXF1H100V C ELECTRO 50V RSS 10MF (5X11) TP271 C621 CEXF1C470V C ELECTRO 16V RSS 47MF (5X11) TP272 C623 CEXF1H100V C ELECTRO 50V RSS 10MF (5X11) TP273 C626 CEXF1C470V C ELECTRO 16V RSS 47MF (5X11) TP274 C628 CEXF1E221V C ELECTRO 25V RSS 220MF (8X11.5) TP275 C629 CMXM2A152J C MYLAR 100V 1500PF J (TP)276 C630 CMXL1J224J C MYLAR 63V MEU 0.22MF J (TP)277 C631 CMXM2A152J C MYLAR 100V 1500PF J (TP)278 C632 CMXL1J224J C MYLAR 63V MEU 0.22MF J (TP)279 C633 CMXL1J224J C MYLAR 63V MEU 0.22MF J (TP)280 C634 CMXL1J224J C MYLAR 63V MEU 0.22MF J (TP)281 C635 CEXF1H100V C ELECTRO 50V RSS 10MF (5X11) TP282 C636 CEXF1C470V C ELECTRO 16V RSS 47MF (5X11) TP283 C637 CEXF1H479V C ELECTRO 50V RSS 4.7MF (5X11) TP284 C638 CEXF1H479V C ELECTRO 50V RSS 4.7MF (5X11) TP285 C639 CEXF1H338V C ELECTRO 50V RSS 0.33MF (5X11) TP286 C640 CEXF1H338V C ELECTRO 50V RSS 0.33MF (5X11) TP287 C643 CEXF1H229V C ELECTRO 50V RSS 2.2MF (5X11) TP288 C701 CEXF1C101V C ELECTRO 16V RSS 100MF (6.3X11) TP289 C703 CEXF1H100V C ELECTRO 50V RSS 10MF (5X11) TP290 C704 CEXF1H229V C ELECTRO 50V RSS 2.2MF (5X11) TP291 C705 CEXF1H109V C ELECTRO 50V RSS 1MF (5X11) TP292 C706 CEXF1E101V C ELECTRO 25V RSS 100MF (6.3X11) TP293 C742 CEXF1H109V C ELECTRO 50V RSS 1MF (5X11) TP294 C802 CCXB2H222K C CERA 500V B 2200PF K (TAPPING)295 C803 CCXB2H222K C CERA 500V B 2200PF K (TAPPING)296 C810 CEXF1E221V C ELECTRO 25V RSS 220MF (8X11.5) TP297 C818 CEXF1H220V C ELECTRO 50V RSS 22MF (5X11) TP298 C819 CEXF1H470V C ELECTRO 50V RSS 47MF (6.3X11) TP299 C871 CMXM2A682J C MYLAR 100V 6800PF J (TP)300 C892 CMXM2A273J C MYLAR 100V 0.027MF J (TP)301 F801A 4857415001 CLIP FUSE PFC5000-0702302 F801B 4857415001 CLIP FUSE PFC5000-0702303 L805 58CX430599 COIL CHOKE AZ-9004Y 940K TP304 Q401 TKTC3207— TR KTC3207 (TP)305 Q504 TKTA1266Y- TR KTA1266Y (TP)306 Q505 TKTA1266Y- TR KTA1266Y (TP)307 Q506 TKTA1266Y- TR KTA1266Y (TP)308 Q507 TKTC3198Y- TR KTC3198Y309 Q508 TKTA1266Y- TR KTA1266Y (TP)310 Q510 TKTC3198Y- TR KTC3198Y


-24-


311 Q601 TKTC3198Y- TR KTC3198Y312 Q602 TKTC3198Y- TR KTC3198Y313 Q603 TKTA1266Y- TR KTA1266Y (TP)314 Q701 TKTC3198Y- TR KTC3198Y315 Q702 TKTC3198Y- TR KTC3198Y316 Q704 TKTA1266Y- TR KTA1266Y (TP)317 Q706 TKTC3198Y- TR KTC3198Y318 Q708 TKTC3198Y- TR KTC3198Y319 Q802 TKTC3198Y- TR KTC3198Y320 Q804 TKSA1013Y- TR KSA1013Y (TP)321 Q805 TKTC3205Y- TR KTC3205Y (TP)322 Q871 TKTC3198Y- TR KTC3198Y323 Q873 TKTC3198Y- TR KTC3198Y324 R301 RN02B471JS R METAL FILM 2W 470 OHM J SMALL325 R302 RN02B221JS R METAL FILM 2W 220 OHM J SMALL326 R303 RN02B129JS R METAL FILM 2W 1.2 OHM J SMALL327 R305 RN02B181JS R METAL FILM 2W 180 OHM J SMALL328 R316 RN02B109JS R METAL FILM 2W 1 OHM J SMALL329 R331 RN02B100JS R METAL FILM 2W 10 OHM J SMALL330 R380 RN02B681JS R METAL FILM 2W 680 OHM J SMALL331 R402 RN02B102JS R METAL FILM 2W 1K OHM J SMALL332 R403 RN02B153JS R METAL FILM 2W 15K OHM J SMALL333 SW701 5S50101090 SW TACT THVH472GCA334 SW702 5S50101090 SW TACT THVH472GCA335 SW703 5S50101090 SW TACT THVH472GCA336 SW704 5S50101090 SW TACT THVH472GCA337 SW705 5S50101090 SW TACT THVH472GCA338 SW706 5S50101090 SW TACT THVH472GCA339 ZZ200 PTMPJAJ954 PCB MAIN AXIAL AS DTQ-21U4SC340 10 2TM14006LB TAPE MASKING 3M #232 6.0X2000M341 20 2TM10006LB TAPE MASKING 3M #232-MAP-C 6.2X2000M342 A001 4859815991 PCB MAIN 246X330343 C103 CCZF1H103Z C CERA 50V F 0.01MF Z344 C107 CCZF1H103Z C CERA 50V F 0.01MF Z345 C206 CCZB1H102K C CERA 50V B 1000PF K (AXIAL)346 C207 CCZB1H102K C CERA 50V B 1000PF K (AXIAL)347 C211 CCZF1H103Z C CERA 50V F 0.01MF Z348 C314 CZCH1H200J C CERA 50V CH 20PF J (AXIAL)349 C454 CCZB1H101K C CERA 50V B 100PF K (AXIAL)350 C501 CCZF1H103Z C CERA 50V F 0.01MF Z351 C504 CCZB1H101K C CERA 50V B 100PF K (AXIAL)352 C505 CCZB1H102K C CERA 50V B 1000PF K (AXIAL)353 C506 CCZB1H101K C CERA 50V B 100PF K (AXIAL)354 C508 CCZB1H101K C CERA 50V B 100PF K (AXIAL)355 C509 CCZB1H221K C CERA 50V B 220PF K (AXIAL)


-25-


356 C510 CCZB1H221K C CERA 50V B 220PF K (AXIAL)357 C511 CCZB1H221K C CERA 50V B 220PF K (AXIAL)358 C514 CCZF1H103Z C CERA 50V F 0.01MF Z359 C515 CCZF1H103Z C CERA 50V F 0.01MF Z360 C516 CCZF1H103Z C CERA 50V F 0.01MF Z361 C517 CZCH1H309C C CERA 50V CH 3PF C (AXIAL)362 C518 CZCH1H309C C CERA 50V CH 3PF C (AXIAL)363 C520 CCZB1H681K C CERA 50V B 680PF K (AXIAL)364 C522 CCZB1H681K C CERA 50V B 680PF K (AXIAL)365 C524 CCZF1H473Z C CERA 50V F 0.047MF Z366 C527 CCZF1H103Z C CERA 50V F 0.01MF Z367 C533 CBZF1H104Z C CERA SEMI 50V F 0.1MF Z368 C540 CCZB1H222K C CERA 50V B 2200PF K AXIAL 369 C541 CCZB1H102K C CERA 50V B 1000PF K (AXIAL)370 C601 CZCH1H479K C CERA 50V CH 4.7PF K (AXIAL)371 C602 CZCH1H479K C CERA 50V CH 4.7PF K (AXIAL)372 C603 CZSL1H560J C CERA 50V SL 56PF J (AXIAL)373 C604 CZSL1H560J C CERA 50V SL 56PF J (AXIAL)374 C605 CZSL1H560J C CERA 50V SL 56PF J (AXIAL)375 C607 CCZF1H103Z C CERA 50V F 0.01MF Z376 C608 CCZF1H103Z C CERA 50V F 0.01MF Z377 C619 CCZF1H103Z C CERA 50V F 0.01MF Z378 C622 CCZF1H103Z C CERA 50V F 0.01MF Z379 C624 CCZF1H103Z C CERA 50V F 0.01MF Z380 C625 CCZF1H103Z C CERA 50V F 0.01MF Z381 C627 CBZF1H104Z C CERA SEMI 50V F 0.1MF Z382 C641 CCZF1H103Z C CERA 50V F 0.01MF Z383 C642 CCZF1H103Z C CERA 50V F 0.01MF Z384 C644 CCZF1H103Z C CERA 50V F 0.01MF Z385 C645 CCZF1H103Z C CERA 50V F 0.01MF Z386 C646 CCZF1H103Z C CERA 50V F 0.01MF Z387 C647 CCZF1H103Z C CERA 50V F 0.01MF Z388 C650 CCZB1H102K C CERA 50V B 1000PF K (AXIAL)389 C743 CCZB1H221K C CERA 50V B 220PF K (AXIAL)390 C752 CZCH1H180J C CERA 50V CH 18PF J (AXIAL)391 C753 CZCH1H180J C CERA 50V CH 18PF J (AXIAL)392 C754 CCZF1H103Z C CERA 50V F 0.01MF Z393 C755 CCZF1H103Z C CERA 50V F 0.01MF Z394 C757 CCZB1H333K C CERA 50V B 0.033MF K AXL395 C780 CCZF1H103Z C CERA 50V F 0.01MF Z396 C891 CCZB1H820K C CERA 50V B 82PF K (AXIAL)397 D101 DUZ33B—— DIODE ZENER UZ-33B398 D102 DUZ5R1B—- DIODE ZENER UZ-5.1B 399 D301 D1N4004S— DIODE 1N4004S400 D302 DBZX55C62- DIODE ZENER BZX55C-62


-26-


401 D304 D1N4148—- DIODE 1N4148 (TAPPING)402 D401 D1N4937G— DIODE 1N4937G (TAPPING)403 D402 DUZ9R1BM— DIODE ZENER UZ-9.1BM 404 D405 D1N4937G— DIODE 1N4937G (TAPPING)405 D406 D1N4937G— DIODE 1N4937G (TAPPING)406 D407 D1N4937G— DIODE 1N4937G (TAPPING)407 D408 D1N4937G— DIODE 1N4937G (TAPPING)408 D409 D1N4148—- DIODE 1N4148 (TAPPING)409 D501 D1N4148—- DIODE 1N4148 (TAPPING)410 D502 D1N4148—- DIODE 1N4148 (TAPPING)411 D503 D1N4148—- DIODE 1N4148 (TAPPING)412 D601 DUZ8R2BM— DIODE ZENER UZ-8.2BM 413 D602 D1N4148—- DIODE 1N4148 (TAPPING)414 D701 D1N4148—- DIODE 1N4148 (TAPPING)415 D704 DUZ3R9B—- DIODE ZENER UZ-3.9B416 D802 DUZ9R1BM— DIODE ZENER UZ-9.1BM 417 D803 DUZ9R1BM— DIODE ZENER UZ-9.1BM 418 D804 DUZ22BM—- DIODE ZENER UZ-22BM419 D806 D1N4148—- DIODE 1N4148 (TAPPING)420 D808 D1N4937G— DIODE 1N4937G (TAPPING)421 D810 DRGP15J—- DIODE RGP15J422 D811 DRGP15J—- DIODE RGP15J423 D812 DUZ5R6BM— DIODE ZENER UZ-5.6BM424 D813 D1N4937G— DIODE 1N4937G (TAPPING)425 J101 85801065GY WIRE COPPER AWG22 1/0.65 TIN COATING426 J102 85801065GY WIRE COPPER AWG22 1/0.65 TIN COATING427 J103 85801065GY WIRE COPPER AWG22 1/0.65 TIN COATING428 J104 85801065GY WIRE COPPER AWG22 1/0.65 TIN COATING429 J105 85801065GY WIRE COPPER AWG22 1/0.65 TIN COATING430 J107 85801065GY WIRE COPPER AWG22 1/0.65 TIN COATING431 J108 85801065GY WIRE COPPER AWG22 1/0.65 TIN COATING432 J109 85801065GY WIRE COPPER AWG22 1/0.65 TIN COATING433 J110 85801065GY WIRE COPPER AWG22 1/0.65 TIN COATING434 J111 85801065GY WIRE COPPER AWG22 1/0.65 TIN COATING435 J112 85801065GY WIRE COPPER AWG22 1/0.65 TIN COATING436 J113 85801065GY WIRE COPPER AWG22 1/0.65 TIN COATING437 J114 85801065GY WIRE COPPER AWG22 1/0.65 TIN COATING438 J115 85801065GY WIRE COPPER AWG22 1/0.65 TIN COATING439 J116 85801065GY WIRE COPPER AWG22 1/0.65 TIN COATING440 J117 85801065GY WIRE COPPER AWG22 1/0.65 TIN COATING441 J118 85801065GY WIRE COPPER AWG22 1/0.65 TIN COATING442 J119 85801065GY WIRE COPPER AWG22 1/0.65 TIN COATING443 J120 85801065GY WIRE COPPER AWG22 1/0.65 TIN COATING444 J123 85801065GY WIRE COPPER AWG22 1/0.65 TIN COATING445 J124 85801065GY WIRE COPPER AWG22 1/0.65 TIN COATING


-27-


446 J125 85801065GY WIRE COPPER AWG22 1/0.65 TIN COATING447 J126 85801065GY WIRE COPPER AWG22 1/0.65 TIN COATING448 J127 85801065GY WIRE COPPER AWG22 1/0.65 TIN COATING449 J128 85801065GY WIRE COPPER AWG22 1/0.65 TIN COATING450 J129 85801065GY WIRE COPPER AWG22 1/0.65 TIN COATING451 J130 85801065GY WIRE COPPER AWG22 1/0.65 TIN COATING452 J131 85801065GY WIRE COPPER AWG22 1/0.65 TIN COATING453 J132 85801065GY WIRE COPPER AWG22 1/0.65 TIN COATING454 J133 85801065GY WIRE COPPER AWG22 1/0.65 TIN COATING455 J134 85801065GY WIRE COPPER AWG22 1/0.65 TIN COATING456 J136 85801065GY WIRE COPPER AWG22 1/0.65 TIN COATING457 J137 85801065GY WIRE COPPER AWG22 1/0.65 TIN COATING458 J138 85801065GY WIRE COPPER AWG22 1/0.65 TIN COATING459 J139 85801065GY WIRE COPPER AWG22 1/0.65 TIN COATING460 J140 85801065GY WIRE COPPER AWG22 1/0.65 TIN COATING461 J141 85801065GY WIRE COPPER AWG22 1/0.65 TIN COATING462 J142 85801065GY WIRE COPPER AWG22 1/0.65 TIN COATING463 J143 85801065GY WIRE COPPER AWG22 1/0.65 TIN COATING464 J144 85801065GY WIRE COPPER AWG22 1/0.65 TIN COATING465 J145 85801065GY WIRE COPPER AWG22 1/0.65 TIN COATING466 J146 85801065GY WIRE COPPER AWG22 1/0.65 TIN COATING467 J147 85801065GY WIRE COPPER AWG22 1/0.65 TIN COATING468 J149 85801065GY WIRE COPPER AWG22 1/0.65 TIN COATING469 J150 85801065GY WIRE COPPER AWG22 1/0.65 TIN COATING470 J151 85801065GY WIRE COPPER AWG22 1/0.65 TIN COATING471 J152 85801065GY WIRE COPPER AWG22 1/0.65 TIN COATING472 J153 85801065GY WIRE COPPER AWG22 1/0.65 TIN COATING473 J154 85801065GY WIRE COPPER AWG22 1/0.65 TIN COATING474 J155 85801065GY WIRE COPPER AWG22 1/0.65 TIN COATING475 J156 85801065GY WIRE COPPER AWG22 1/0.65 TIN COATING476 J157 85801065GY WIRE COPPER AWG22 1/0.65 TIN COATING477 J158 85801065GY WIRE COPPER AWG22 1/0.65 TIN COATING478 J159 85801065GY WIRE COPPER AWG22 1/0.65 TIN COATING479 J160 85801065GY WIRE COPPER AWG22 1/0.65 TIN COATING480 J161 85801065GY WIRE COPPER AWG22 1/0.65 TIN COATING481 J162 85801065GY WIRE COPPER AWG22 1/0.65 TIN COATING482 J163 85801065GY WIRE COPPER AWG22 1/0.65 TIN COATING483 J164 85801065GY WIRE COPPER AWG22 1/0.65 TIN COATING484 J165 85801065GY WIRE COPPER AWG22 1/0.65 TIN COATING485 J169 85801065GY WIRE COPPER AWG22 1/0.65 TIN COATING486 J173 85801065GY WIRE COPPER AWG22 1/0.65 TIN COATING487 J175 85801065GY WIRE COPPER AWG22 1/0.65 TIN COATING488 J176 85801065GY WIRE COPPER AWG22 1/0.65 TIN COATING489 J179 85801065GY WIRE COPPER AWG22 1/0.65 TIN COATING490 J180 85801065GY WIRE COPPER AWG22 1/0.65 TIN COATING


-28-




-29-




-30-


581 J512 85801065GY WIRE COPPER AWG22 1/0.65 TIN COATING582 J556 85801065GY WIRE COPPER AWG22 1/0.65 TIN COATING583 J611 85801065GY WIRE COPPER AWG22 1/0.65 TIN COATING584 J705 85801065GY WIRE COPPER AWG22 1/0.65 TIN COATING585 J713 85801065GY WIRE COPPER AWG22 1/0.65 TIN COATING586 J720 85801065GY WIRE COPPER AWG22 1/0.65 TIN COATING587 J721 85801065GY WIRE COPPER AWG22 1/0.65 TIN COATING588 J722 85801065GY WIRE COPPER AWG22 1/0.65 TIN COATING589 J723 85801065GY WIRE COPPER AWG22 1/0.65 TIN COATING590 J724 85801065GY WIRE COPPER AWG22 1/0.65 TIN COATING591 J728 85801065GY WIRE COPPER AWG22 1/0.65 TIN COATING592 J778 85801065GY WIRE COPPER AWG22 1/0.65 TIN COATING593 J797 85801065GY WIRE COPPER AWG22 1/0.65 TIN COATING594 J798 85801065GY WIRE COPPER AWG22 1/0.65 TIN COATING595 J802 85801065GY WIRE COPPER AWG22 1/0.65 TIN COATING596 J803 85801065GY WIRE COPPER AWG22 1/0.65 TIN COATING597 J811 85801065GY WIRE COPPER AWG22 1/0.65 TIN COATING598 J812 85801065GY WIRE COPPER AWG22 1/0.65 TIN COATING599 J815 85801065GY WIRE COPPER AWG22 1/0.65 TIN COATING600 J816 85801065GY WIRE COPPER AWG22 1/0.65 TIN COATING601 J817 85801065GY WIRE COPPER AWG22 1/0.65 TIN COATING602 J823 85801065GY WIRE COPPER AWG22 1/0.65 TIN COATING603 J827 85801065GY WIRE COPPER AWG22 1/0.65 TIN COATING604 J857 85801065GY WIRE COPPER AWG22 1/0.65 TIN COATING605 J860 85801065GY WIRE COPPER AWG22 1/0.65 TIN COATING606 J861 85801065GY WIRE COPPER AWG22 1/0.65 TIN COATING607 J862 85801065GY WIRE COPPER AWG22 1/0.65 TIN COATING608 J864 85801065GY WIRE COPPER AWG22 1/0.65 TIN COATING609 J865 85801065GY WIRE COPPER AWG22 1/0.65 TIN COATING610 J867 85801065GY WIRE COPPER AWG22 1/0.65 TIN COATING611 L406 85801065GY WIRE COPPER AWG22 1/0.65 TIN COATING612 L501 5CPZ568M02 COIL PEAKING 0.56UH M (AXIAL 3.5MM)613 L502 5CPZ568M02 COIL PEAKING 0.56UH M (AXIAL 3.5MM)614 L503 5CPZ689K02 COIL PEAKING 6.8UH K (AXIAL 3.5MM)615 L504 5CPZ689K02 COIL PEAKING 6.8UH K (AXIAL 3.5MM)616 L505 5CPZ568M02 COIL PEAKING 0.56UH M (AXIAL 3.5MM)617 L601 5CPZ150K02 COIL PEAKING 15UH K (AXIAL 3.5MM)618 L602 5CPZ568M02 COIL PEAKING 0.56UH M (AXIAL 3.5MM)619 L603 5CPZ568M02 COIL PEAKING 0.56UH M (AXIAL 3.5MM)620 L701 5CPZ220K02 COIL PEAKING 22UH K (AXIAL 3.5MM)621 L802 5MC0000100 COIL BEAD HC-3550622 L806 5MC0000100 COIL BEAD HC-3550623 L807 5MC0000100 COIL BEAD HC-3550624 L808 5MC0000100 COIL BEAD HC-3550625 L809 5MC0000100 COIL BEAD HC-3550


-31-


626 R103 RD-AZ102J- R CARBON FILM 1/6 1K OHM J627 R104 RD-AZ102J- R CARBON FILM 1/6 1K OHM J628 R105 RD-2Z392J- R CARBON FILM 1/2 3.9K OHM J629 R201 RD-4Z241J- R CARBON FILM 1/4 240 OHM J630 R202 RD-AZ750J- R CARBON FILM 1/6 75 OHM J631 R203 RD-AZ750J- R CARBON FILM 1/6 75 OHM J632 R204 RD-AZ103J- R CARBON FILM 1/6 10K OHM J633 R205 RD-AZ750J- R CARBON FILM 1/6 75 OHM J634 R206 RD-AZ102J- R CARBON FILM 1/6 1K OHM J635 R207 RD-AZ750J- R CARBON FILM 1/6 75 OHM J636 R208 RD-AZ750J- R CARBON FILM 1/6 75 OHM J637 R209 RD-AZ512J- R CARBON FILM 1/6 5.1K OHM J638 R210 RD-AZ750J- R CARBON FILM 1/6 75 OHM J639 R211 RD-AZ102J- R CARBON FILM 1/6 1K OHM J640 R212 RD-AZ101J- R CARBON FILM 1/6 100 OHM J641 R213 RD-AZ750J- R CARBON FILM 1/6 75 OHM J642 R214 RD-AZ101J- R CARBON FILM 1/6 100 OHM J643 R215 RD-AZ101J- R CARBON FILM 1/6 100 OHM J644 R216 RD-AZ750J- R CARBON FILM 1/6 75 OHM J645 R310 RD-AZ103J- R CARBON FILM 1/6 10K OHM J646 R311 RD-AZ223J- R CARBON FILM 1/6 22K OHM J647 R312 RD-AZ133J- R CARBON FILM 1/6 13K OHM J648 R313 RD-AZ204J- R CARBON FILM 1/6 200K OHM J649 R314 RD-4Z564J- R CARBON FILM 1/4 560K OHM J650 R315 RD-AZ391J- R CARBON FILM 1/6 390 OHM J651 R351 RD-4Z102J- R CARBON FILM 1/4 1K OHM J652 R352 RN-AZ1003F R METAL FILM 1/6 100K OHM F653 R353 RN-4Z8201F R METAL FILM 1/4 8.2K OHM F654 R359 RD-AZ333J- R CARBON FILM 1/6 33K OHM J655 R360 RD-AZ303J- R CARBON FILM 1/6 30K OHM J656 R361 RD-AZ103J- R CARBON FILM 1/6 10K OHM J657 R362 RD-AZ103J- R CARBON FILM 1/6 10K OHM J658 R363 RD-AZ272J- R CARBON FILM 1/6 2.7K OHM J659 R364 RN-AZ2402F R METAL FILM 1/6 24.0K OHM F660 R401 RD-4Z472J- R CARBON FILM 1/4 4.7K OHM J661 R416 RD-2Z121J- R CARBON FILM 1/2 120 OHM J662 R418 RD-AZ472J- R CARBON FILM 1/6 4.7K OHM J663 R451 RN-AZ1202F R METAL FILM 1/6 12K OHM F664 R452 RN-AZ2202F R METAL FILM 1/6 22K OHM F665 R454 RD-AZ102J- R CARBON FILM 1/6 1K OHM J666 R501 RD-AZ101J- R CARBON FILM 1/6 100 OHM J667 R502 RD-AZ101J- R CARBON FILM 1/6 100 OHM J668 R503 RD-AZ101J- R CARBON FILM 1/6 100 OHM J669 R504 RD-AZ103J- R CARBON FILM 1/6 10K OHM J670 R507 RD-AZ102J- R CARBON FILM 1/6 1K OHM J


-32-


671 R509 RD-AZ303J- R CARBON FILM 1/6 30K OHM J672 R518 RD-AZ682J- R CARBON FILM 1/6 6.8K OHM J673 R519 RD-AZ682J- R CARBON FILM 1/6 6.8K OHM J674 R520 RD-AZ472J- R CARBON FILM 1/6 4.7K OHM J675 R523 RD-AZ472J- R CARBON FILM 1/6 4.7K OHM J676 R524 RD-AZ222J- R CARBON FILM 1/6 2.2K OHM J677 R525 RD-AZ271J- R CARBON FILM 1/6 270 OHM J678 R526 RD-AZ223J- R CARBON FILM 1/6 22K OHM J679 R527 RD-AZ122J- R CARBON FILM 1/6 1.2K OHM J680 R532 RD-AZ431J- R CARBON FILM 1/6 430 OHM J681 R534 RD-AZ103J- R CARBON FILM 1/6 10K OHM J682 R535 RD-AZ151J- R CARBON FILM 1/6 150 OHM J683 R536 RD-AZ151J- R CARBON FILM 1/6 150 OHM J684 R537 RD-AZ151J- R CARBON FILM 1/6 150 OHM J685 R538 RD-AZ221J- R CARBON FILM 1/6 220 OHM J686 R539 RD-AZ221J- R CARBON FILM 1/6 220 OHM J687 R540 RD-AZ221J- R CARBON FILM 1/6 220 OHM J688 R541 RD-AZ101J- R CARBON FILM 1/6 100 OHM J689 R542 RD-AZ101J- R CARBON FILM 1/6 100 OHM J690 R543 RD-AZ101J- R CARBON FILM 1/6 100 OHM J691 R544 RD-AZ330J- R CARBON FILM 1/6 33 OHM J692 R545 RD-AZ330J- R CARBON FILM 1/6 33 OHM J693 R546 RD-AZ330J- R CARBON FILM 1/6 33 OHM J694 R547 RD-AZ152J- R CARBON FILM 1/6 1.5K OHM J695 R548 RD-AZ220J- R CARBON FILM 1/6 22 OHM J696 R549 RD-AZ750J- R CARBON FILM 1/6 75 OHM J697 R550 RD-AZ271J- R CARBON FILM 1/6 270 OHM J698 R551 RD-AZ750J- R CARBON FILM 1/6 75 OHM J699 R553 RD-AZ101J- R CARBON FILM 1/6 100 OHM J700 R556 RD-AZ360J- R CARBON FILM 1/6 36 OHM J701 R560 RD-AZ561J- R CARBON FILM 1/6 560 OHM J702 R561 RD-AZ102J- R CARBON FILM 1/6 1K OHM J703 R562 RD-AZ621J- R CARBON FILM 1/6 620 OHM J704 R571 RD-AZ101J- R CARBON FILM 1/6 100 OHM J705 R601 RD-AZ101J- R CARBON FILM 1/6 100 OHM J706 R602 RD-AZ101J- R CARBON FILM 1/6 100 OHM J707 R603 RD-AZ103J- R CARBON FILM 1/6 10K OHM J708 R604 RD-AZ102J- R CARBON FILM 1/6 1K OHM J709 R605 RD-AZ162J- R CARBON FILM 1/6 1.6K OHM J710 R606 RD-AZ102J- R CARBON FILM 1/6 1K OHM J711 R607 RD-AZ162J- R CARBON FILM 1/6 1.6K OHM J712 R608 RD-2Z111J- R CARBON FILM 1/2 110 OHM J713 R609 RD-AZ101J- R CARBON FILM 1/6 100 OHM J714 R610 RD-AZ101J- R CARBON FILM 1/6 100 OHM J715 R611 RD-AZ101J- R CARBON FILM 1/6 100 OHM J


-33-


716 R612 RD-AZ101J- R CARBON FILM 1/6 100 OHM J717 R613 RD-AZ101J- R CARBON FILM 1/6 100 OHM J718 R614 RD-AZ101J- R CARBON FILM 1/6 100 OHM J719 R615 RD-AZ101J- R CARBON FILM 1/6 100 OHM J720 R616 RD-AZ101J- R CARBON FILM 1/6 100 OHM J721 R618 RD-AZ103J- R CARBON FILM 1/6 10K OHM J722 R619 RD-AZ392J- R CARBON FILM 1/6 3.9K OHM J723 R620 RD-4Z681J- R CARBON FILM 1/4 680 OHM J724 R622 RD-AZ243J- R CARBON FILM 1/6 24K OHM J725 R623 RD-AZ202J- R CARBON FILM 1/6 2K OHM J726 R624 RD-AZ223J- R CARBON FILM 1/6 22K OHM J727 R625 RD-AZ153J- R CARBON FILM 1/6 15K OHM J728 R626 RD-2Z101J- R CARBON FILM 1/2 100 OHM J729 R627 RD-2Z101J- R CARBON FILM 1/2 100 OHM J730 R628 RD-AZ101J- R CARBON FILM 1/6 100 OHM J731 R629 RD-AZ101J- R CARBON FILM 1/6 100 OHM J732 R631 RD-4Z829J- R CARBON FILM 1/4 8.2 OHM J733 R632 RD-4Z829J- R CARBON FILM 1/4 8.2 OHM J734 R633 RD-4Z829J- R CARBON FILM 1/4 8.2 OHM J735 R634 RD-4Z829J- R CARBON FILM 1/4 8.2 OHM J736 R701 RD-AZ479J- R CARBON FILM 1/6 4.7 OHM J737 R702 RD-AZ103J- R CARBON FILM 1/6 10K OHM J738 R703 RD-AZ101J- R CARBON FILM 1/6 100 OHM J739 R704 RD-AZ102J- R CARBON FILM 1/6 1K OHM J740 R705 RD-AZ472J- R CARBON FILM 1/6 4.7K OHM J741 R706 RD-AZ472J- R CARBON FILM 1/6 4.7K OHM J742 R707 RD-AZ102J- R CARBON FILM 1/6 1K OHM J743 R709 RD-AZ152J- R CARBON FILM 1/6 1.5K OHM J744 R711 RD-AZ102J- R CARBON FILM 1/6 1K OHM J745 R712 RD-AZ101J- R CARBON FILM 1/6 100 OHM J746 R713 RD-AZ101J- R CARBON FILM 1/6 100 OHM J747 R721 RD-AZ102J- R CARBON FILM 1/6 1K OHM J748 R723 RD-AZ101J- R CARBON FILM 1/6 100 OHM J749 R724 RD-AZ431J- R CARBON FILM 1/6 430 OHM J750 R732 RD-AZ102J- R CARBON FILM 1/6 1K OHM J751 R733 RD-AZ102J- R CARBON FILM 1/6 1K OHM J752 R734 RD-AZ102J- R CARBON FILM 1/6 1K OHM J753 R735 RD-AZ102J- R CARBON FILM 1/6 1K OHM J754 R736 RD-AZ103J- R CARBON FILM 1/6 10K OHM J755 R737 RD-AZ103J- R CARBON FILM 1/6 10K OHM J756 R738 RD-AZ471J- R CARBON FILM 1/6 470 OHM J757 R742 RD-AZ102J- R CARBON FILM 1/6 1K OHM J758 R743 RD-AZ102J- R CARBON FILM 1/6 1K OHM J759 R744 RD-AZ102J- R CARBON FILM 1/6 1K OHM J760 R745 RD-AZ102J- R CARBON FILM 1/6 1K OHM J


-34-


761 R746 RD-AZ222J- R CARBON FILM 1/6 2.2K OHM J762 R747 RD-AZ392J- R CARBON FILM 1/6 3.9K OHM J763 R748 RD-AZ472J- R CARBON FILM 1/6 4.7K OHM J764 R750 RD-AZ472J- R CARBON FILM 1/6 4.7K OHM J765 R751 RD-AZ471J- R CARBON FILM 1/6 470 OHM J766 R752 RD-AZ471J- R CARBON FILM 1/6 470 OHM J767 R762 RD-AZ511J- R CARBON FILM 1/6 510 OHM J768 R769 RD-AZ102J- R CARBON FILM 1/6 1K OHM J769 R780 RD-AZ102J- R CARBON FILM 1/6 1K OHM J770 R782 RD-AZ331J- R CARBON FILM 1/6 330 OHM J771 R784 RD-AZ514J- R CARBON FILM 1/6 510K OHM J772 R785 RD-AZ102J- R CARBON FILM 1/6 1K OHM J773 R786 RD-AZ102J- R CARBON FILM 1/6 1K OHM J774 R787 RD-AZ472J- R CARBON FILM 1/6 4.7K OHM J775 R788 RD-AZ472J- R CARBON FILM 1/6 4.7K OHM J776 R789 RD-AZ473J- R CARBON FILM 1/6 47K OHM J777 R790 RD-AZ103J- R CARBON FILM 1/6 10K OHM J778 R791 RD-AZ102J- R CARBON FILM 1/6 1K OHM J779 R792 RD-AZ361J- R CARBON FILM 1/6 360 OHM J780 R793 RD-AZ361J- R CARBON FILM 1/6 360 OHM J781 R794 RD-AZ361J- R CARBON FILM 1/6 360 OHM J782 R795 RD-AZ103J- R CARBON FILM 1/6 10K OHM J783 R796 RD-AZ102J- R CARBON FILM 1/6 1K OHM J784 R797 RD-AZ471J- R CARBON FILM 1/6 470 OHM J785 R798 RD-AZ103J- R CARBON FILM 1/6 10K OHM J786 R802 RN-AZ5601F R METAL FILM 1/6 5.6K OHM F787 R804 RD-2Z105J- R CARBON FILM 1/2 1M OHM J788 R806 RD-AZ102J- R CARBON FILM 1/6 1K OHM J789 R813 RD-AZ363J- R CARBON FILM 1/6 36K OHM J790 R818 RD-AZ561J- R CARBON FILM 1/6 560 OHM J791 R822 RD-AZ563J- R CARBON FILM 1/6 56K OHM J792 R862 RD-AZ223J- R CARBON FILM 1/6 22K OHM J793 R863 RD-AZ562J- R CARBON FILM 1/6 5.6K OHM J794 R868 RN-AZ2201F R METAL FILM 1/6 2.2K OHM F795 R869 RD-AZ154J- R CARBON FILM 1/6 150K OHM J796 R870 RD-AZ432J- R CARBON FILM 1/6 4.3K OHM J797 R871 RD-AZ102J- R CARBON FILM 1/6 1K OHM J798 R872 RD-AZ122J- R CARBON FILM 1/6 1.2K OHM J799 R873 RD-AZ103J- R CARBON FILM 1/6 10K OHM J800 R874 RD-AZ202J- R CARBON FILM 1/6 2K OHM J801 R875 RD-AZ752J- R CARBON FILM 1/6 7.5K OHM J802 R876 RD-AZ472J- R CARBON FILM 1/6 4.7K OHM J803 R877 RD-AZ103J- R CARBON FILM 1/6 10K OHM J804 R878 RN-AZ5102F R METAL FILM 1/6 51.0K OHM F805 R879 RN-AZ5102F R METAL FILM 1/6 51.0K OHM F


-35-


806 R881 RC-2Z565KP R CARBON COMP 1/2 5.6M OHM K807 R884 RC-2Z225KP R CARBON COMP 1/2 2.2M OHM K808 R892 RD-AZ203J- R CARBON FILM 1/6 20K OHM J809 R893 RN-AZ2002F R METAL FILM 1/6 20.0K OHM F810 R980 RD-4Z684J- R CARBON FILM 1/4 680K OHM J811 ZZ300 PTCPMSJ954 PCB CRT MANUAL AS DTQ-21U4SC812 C901 CEXF2E100V C ELECTRO 250V RSS 10MF (10X20) TP813 C965 CH1HFE102M C CERA AC 4.0KV 1000PF E DG814 I901 PTB2SW5403 HEAT SINK ASS`Y 1TEA5101B- + 7174300811815 I901 1TEA5101B- IC VIDEO AMP TEA5101B816 I901A 4857025403 HEAT SINK AL050P-H24 T=2817 I901B 7174300811 SCREW TAPPTITE TT2 RND 3X8 MFZN818 PA502 4850710V03 CONNECTOR YH025-10+YST025+ULW=400819 SCT1 4859303830 SOCKET CRT ISHG94S820 ZZ200 PTCPJ0J954 PCB CRT ODD SHAPE AS DTQ-21U4SC821 ZZ200 PTCPJRJ954 PCB CRT RADIAL AS DTQ-21U4SC822 C902 CCXB2H102K C CERA 500V B 1000PF K (TAPPING)823 C904 CEXF1C331V C ELECTRO 16V RSS 330MF (8X11.5) TP824 C909 CEXF1C470V C ELECTRO 16V RSS 47MF (5X11) TP825 C911 CCXB2H102K C CERA 500V B 1000PF K (TAPPING)826 Q901 TKTA1270Y- TR KTA1270Y (TP)827 ZZ200 PTCPJAJ954 PCB CRT AXIAL AS DTQ-21U4SC828 A002 4859828813 PCB CRT 108X72(246X246/6) C1B829 C903 CCZB1H102K C CERA 50V B 1000PF K (AXIAL)830 C905 CCZB1H102K C CERA 50V B 1000PF K (AXIAL)831 C907 CCZB1H102K C CERA 50V B 1000PF K (AXIAL)832 C910 CBZF1H104Z C CERA SEMI 50V F 0.1MF Z833 D901 D1N4148—- DIODE 1N4148 (TAPPING)834 D902 D1N4148—- DIODE 1N4148 (TAPPING)835 D903 D1N4148—- DIODE 1N4148 (TAPPING)836 D904 D1N4148—- DIODE 1N4148 (TAPPING)837 J901 85801065GY WIRE COPPER AWG22 1/0.65 TIN COATING838 J902 85801065GY WIRE COPPER AWG22 1/0.65 TIN COATING839 J903 85801065GY WIRE COPPER AWG22 1/0.65 TIN COATING840 J904 85801065GY WIRE COPPER AWG22 1/0.65 TIN COATING841 J905 85801065GY WIRE COPPER AWG22 1/0.65 TIN COATING842 J906 85801065GY WIRE COPPER AWG22 1/0.65 TIN COATING843 J907 85801065GY WIRE COPPER AWG22 1/0.65 TIN COATING844 R901 RD-AZ101J- R CARBON FILM 1/6 100 OHM J845 R903 RD-AZ331J- R CARBON FILM 1/6 330 OHM J846 R904 RD-AZ432J- R CARBON FILM 1/6 4.3K OHM J847 R905 RD-2Z683J- R CARBON FILM 1/2 68K OHM J848 R906 RD-AZ751J- R CARBON FILM 1/6 750 OHM J849 R907 RC-2Z102K- R CARBON COMP 1/2 1K OHM K850 R908 RD-AZ331J- R CARBON FILM 1/6 330 OHM J


-36-


851 R909 RD-AZ432J- R CARBON FILM 1/6 4.3K OHM J852 R910 RD-2Z683J- R CARBON FILM 1/2 68K OHM J853 R911 RD-AZ751J- R CARBON FILM 1/6 750 OHM J854 R912 RC-2Z102K- R CARBON COMP 1/2 1K OHM K855 R913 RD-AZ331J- R CARBON FILM 1/6 330 OHM J856 R914 RD-AZ432J- R CARBON FILM 1/6 4.3K OHM J857 R915 RD-2Z683J- R CARBON FILM 1/2 68K OHM J858 R916 RD-AZ751J- R CARBON FILM 1/6 750 OHM J859 R917 RC-2Z102K- R CARBON COMP 1/2 1K OHM K860 R918 RD-AZ301J- R CARBON FILM 1/6 300 OHM J861 R919 RD-AZ301J- R CARBON FILM 1/6 300 OHM J862 R920 RD-AZ301J- R CARBON FILM 1/6 300 OHM J863 C801 CL1UC3104M C LINE ACROSS WORLD AC250V 0.1UF M R.47


-37-

DIFFERENT PARTS LIST

1 I801 PTC2SW7720 HEAT SINK ASS`Y 1MR2540—- + 71743008112 00001 1MR2540—- IC POWER MR25403 0000A 4857027720 HEAT SINK AL EX 4 0000B 7174300811 SCREW TAPPTITE TT2 RND 3X8 MFZN5 Q402 PTF2SW7607 HEAT SINK ASS`Y T2SD2578— + 71743010116 00001 T2SD2578— TR HORI 2SD25787 0000A 4857027607 HEAT SINK AL EX8 0000B 7174301011 SCREW TAPPTITE TT2 RND 3X10 MFZN9 A001 4859828413 PCB CRT 165X113(330X246/2X2) C1B10 C310 CEYF1E332V C ELECTRO 25V RSS 3300MF (16X31.5)11 C404 CMYH3C752J C MYLAR 1.6KV BUP 7500PF J12 C406 CMYE2G434J C MYLAR 400V PU 0.43MF J13 C420 CEXF2E100V C ELECTRO 250V RSS 10MF (10X20) TP14 C437 CEXF1E221V C ELECTRO 25V RSS 220MF (8X11.5) TP15 C804 CEYN2D471T C ELECTRO 200V FWS 470MF (25X40)16 C813 CBXB3D102K C CERA SEMI 2KV BL(N) 1000PF K (T)17 C852 CEXF1E222V C ELECTRO 25V RSS 2200MF (16X25) TP18 C880 CH1AEE472M C CERA AC 2.5KV 4700PF M KH DE130719 C881 CH1AEE472M C CERA AC 2.5KV 4700PF M KH DE130720 C901 CEXF1H100V C ELECTRO 50V RSS 10MF (5X11) TP21 C902 CMXM2A104J C MYLAR 100V 0.1MF J (TP)22 C904 CCXB2H102K C CERA 500V B 1000PF K (TAPPING)23 C905 CCXB2H102K C CERA 500V B 1000PF K (TAPPING)24 D407 DRGP15J—- DIODE RGP15J25 D408 DRGP15J—- DIODE RGP15J26 D801 PTC1SW8902 HEAT SINK ASS`Y DPBS606GU- + 717430081127 D801A 4857018902 HEAT SINK A1050P-H2428 D801B 7174300811 SCREW TAPPTITE TT2 RND 3X8 MFZN29 D904 DLT2A05G— DIODE LT2A05G (TP)30 J823 RD-4Z100J- R CARBON FILM 1/4 10 OHM J31 L401 58H0000064 COIL H-LINEARITY TRL-350B32 L406 5MC0000100 COIL BEAD HC-355033 L801 5PLF30A1— FILTER LINE LF-30A134 L805 58C0000096 COIL CHOKE 610G0233(470K)35 M191 4851948700 BUTTON CTRL 4954900+5549100 29U436 M201 4852083400 MASK FRONT FR HIPS GY 29U437 M201A 4856015821 SCREW CRT FIX SWRM+SK5 L=3538 M201C 4856215402 WASHER RUBBER CR T2.039 M211 4852163000 COVER BACK FR HIPS GY 29U440 M211A 7172401612 SCREW TAPPTITE TT2 TRS 4X16 MFZN BK41 M211B 7172401612 SCREW TAPPTITE TT2 TRS 4X16 MFZN BK42 M211C 7178301212 SCREW TAPPTITE TT2 WAS 3X12 MFZN BK43 M481 4854864000 BUTTON POWER FR HIPS GY 29U444 M561 48556174SD MARK BRAND SILVER DIA-CUTTING45 M681 4856812400 BAND PP AUTO T1.1XW17mmXL770M46 M684 4856812001 TIE CABLE NYLON66 DA10047 M801 485806245K BOX CARTON DW-3B48 M811 4858101000 PAD EPS 29U449 M821 4858215601 BAG P.E PE FOAM t0.5x1600x127050 Q401 TKTC3229— TR KTC322951 Q509 TKTC3198Y- TR KTC3198Y52 R101 RS02Z101JS R M-OXIDE FILM 2W 100 OHM J SMALL53 R102 RS02Z101JS R M-OXIDE FILM 2W 100 OHM J SMALL54 R301 RN02B102JS R METAL FILM 2W 1K OHM J SMALL


**This BOM is based on DTQ-27U4SC, it is different parts list in comparison with DTQ-20U4SC.

-38--38-


55 R302 RN02B620JS R METAL FILM 2W 62 OHM J SMALL56 R305 RN02B910JS R METAL FILM 2W 91 OHM J SMALL57 R351 RD-4Z362J- R CARBON FILM 1/4 3.6K OHM J58 R353 RN-AZ1302F R METAL FILM 1/6 13K OHM F59 R359 RD-4Z623J- R CARBON FILM 1/4 62K OHM J60 R360 RD-4Z562J- R CARBON FILM 1/4 5.6K OHM J61 R362 RD-4Z473J- R CARBON FILM 1/4 47K OHM J62 R363 RD-4Z113J- R CARBON FILM 1/4 11K OHM J63 R364 RN-AZ2002F R METAL FILM 1/6 20.0K OHM F64 R380 RN02B102JS R METAL FILM 2W 1K OHM J SMALL65 R405 RS02Z100JS R M-OXIDE FILM 2W 10 OHM J SMALL66 R412 RS02Z209JS R M-OXIDE FILM 2W 2 OHM J SMALL67 R413 RS02Z159JS R M-OXIDE FILM 2W 1.5 OHM J SMALL68 R414 RS02Z478J- R M-OXIDE FILM 2W 0.47 OHM J(TAPPING)69 R451 RN-AZ1102F R METAL FILM 1/6 11.0K OHM F70 R452 RN-AZ1502F R METAL FILM 1/6 15K OHM F71 R532 RD-AZ101J- R CARBON FILM 1/6 100 OHM J72 R547 RD-AZ272J- R CARBON FILM 1/6 2.7K OHM J73 R605 RD-AZ272J- R CARBON FILM 1/6 2.7K OHM J74 R607 RD-AZ272J- R CARBON FILM 1/6 2.7K OHM J75 R703 85801065GY WIRE COPPER AWG22 1/0.65 TIN COATING76 R756 RD-AZ472J- R CARBON FILM 1/6 4.7K OHM J77 R796 RD-AZ472J- R CARBON FILM 1/6 4.7K OHM J78 R814 RS02Z828JS R M-OXIDE FILM 2W 0.82 OHM J SMALL79 R815 RS02Z828JS R M-OXIDE FILM 2W 0.82 OHM J SMALL80 R822 RD-AZ223J- R CARBON FILM 1/6 22K OHM J81 R862 RD-AZ203J- R CARBON FILM 1/6 20K OHM J82 R863 RD-AZ203J- R CARBON FILM 1/6 20K OHM J83 R870 RN-AZ1302F R METAL FILM 1/6 13K OHM F84 R903 RN02B240JS R METAL FILM 2W 24 OHM J SMALL85 R904 RS01Z683J- R M-OXIDE FILM 1W 68K OHM J (TAPPING)86 R905 RD-AZ511J- R CARBON FILM 1/6 510 OHM J87 R906 RD-AZ332J- R CARBON FILM 1/6 3.3K OHM J88 R907 RS01Z683J- R M-OXIDE FILM 1W 68K OHM J (TAPPING)89 R908 RD-AZ511J- R CARBON FILM 1/6 510 OHM J90 R909 RD-AZ332J- R CARBON FILM 1/6 3.3K OHM J91 R910 RS01Z683J- R M-OXIDE FILM 1W 68K OHM J (TAPPING)92 R911 RD-AZ511J- R CARBON FILM 1/6 510 OHM J93 R912 RD-AZ332J- R CARBON FILM 1/6 3.3K OHM J94 R913 RD-AZ751J- R CARBON FILM 1/6 750 OHM J95 R914 RD-AZ472J- R CARBON FILM 1/6 4.7K OHM J96 R915 RD-AZ751J- R CARBON FILM 1/6 750 OHM J97 R916 RD-AZ472J- R CARBON FILM 1/6 4.7K OHM J98 R917 RD-AZ751J- R CARBON FILM 1/6 750 OHM J99 R918 RD-AZ472J- R CARBON FILM 1/6 4.7K OHM J100 R919 RC-2Z102K- R CARBON COMP 1/2 1K OHM K101 R920 RC-2Z102K- R CARBON COMP 1/2 1K OHM K102 SCT1 4859302830 SOCKET CRT ISH-02S103 SP01 4858310810 SPEAKER SP-58126F01104 SP01A 7172401212 SCREW TAPPTITE TT2 TRS 4X12 MFZNBK105 SP02 4858310810 SPEAKER SP-58126F01106 SP02A 7172401212 SCREW TAPPTITE TT2 TRS 4X12 MFZNBK107 T401 5TD0000018 TRANS DRIVE THD-120108 T402 50H0000189 FBT FFA94048L109 T801 50M5345B9- TRANS SMPS TSM-5345B9


-39--39-


110 V901 4859635262 CRT A68QDL280X011(B) P38111 ZZ120 PTBCSHK009 COVER BACK AS DTQ-29U4SC112 ZZ130 PTPKCPK009 PACKING AS DTQ-29U4SC113 ZZ131 48519A4210 CRT GROUND NET 2901H-1015-2P114 ZZ132 58G0000143 COIL DEGAUSSING DC-29S1115 ZZ140 PTCACAK009 CABINET AS DTQ-29U4SC116 ZZ200 PTCPJ0K009 PCB CRT ODD SHAPE AS DTQ-29U4SC117 ZZ200 PTCPJAK009 PCB CRT AXIAL AS DTQ-29U4SC118 ZZ200 PTCPJBK009 PCB CRT M-10 AS DTQ-29U4SC119 ZZ200 PTCPJRK009 PCB CRT RADIAL AS DTQ-29U4SC120 ZZ200 PTFMSJK009 MASK FRONT AS DTQ-29U4SC121 ZZ200 PTMPJ0K009 PCB MAIN (RHU) AS DTQ-29U4SC122 ZZ200 PTMPJAK009 PCB MAIN AXIAL AS DTQ-29U4SC123 ZZ200 PTMPJBK009 PCB MAIN M-10 AS DTQ-29U4SC124 ZZ200 PTMPJRK009 PCB MAIN RADIAL AS DTQ-29U4SC125 ZZ210 PTSPPWK009 SPEAKER AS DTQ-29U4SC126 ZZ290 PTMPMSK009 PCB MAIN MANUAL AS DTQ-29U4SC127 ZZ300 PTCPMSK009 PCB CRT MANUAL AS DTQ-29U4SC128 Q908 PTE2SW6901 HEAT SINK ASS`Y TKTA1659Y- + 7174300811129 00001 TKTA1659AY TR KTA1659AY130 0000A 4857026901 HEAT SINK AL EX BK131 0000B 7174300811 SCREW TAPPTITE TT2 RND 3X8 MFZN132 Q909 PTB2SW6900 HEAT SINK ASS`Y TKTC4370Y- + 7174300811133 0000A 4857026900 HEAT SINK AL EX134 0000B 7174300811 SCREW TAPPTITE TT2 RND 3X8 MFZN135 001— TKTC4370AY TR KTC4370AY136 C404A CEXF2C109V C ELECTRO 160V RSS 1MF (6.3X11) TP137 C407 CMYH3C752J C MYLAR 1.6KV BUP 7500PF J138 C413 CCXB2H102K C CERA 500V B 1000PF K (TAPPING)139 C416 CCXB2H102K C CERA 500V B 1000PF K (TAPPING)140 C417 CCXB2H102K C CERA 500V B 1000PF K (TAPPING)141 C535 CCZF1H103Z C CERA 50V F 0.01MF Z142 C536 CCZB1H561K C CERA 50V B 560PF K143 C537 CBZF1H104Z C CERA SEMI 50V F 0.1MF Z144 C539 CCZB1H821K C CERA 50V B 820PF K AXIAL145 C708 CCZF1H103Z C CERA 50V F 0.01MF Z146 C805 CL1UC3104M C LINE ACROSS WORLD AC250V 0.1UF M R.47147 C906 CCXB2H102K C CERA 500V B 1000PF K (TAPPING)148 C907 CEXF2E100V C ELECTRO 250V RSS 10MF (10X20) TP149 C908 CEXF2E100V C ELECTRO 250V RSS 10MF (10X20) TP150 C909 CH1BEE472M C CERA AC U/C/V 2.5KV 4700PF TP 151 C915 CMXM2A822J C MYLAR 100V 8200PF J (TP)152 C916 CEXF1E471V C ELECTRO 25V RSS 470MF (10X16) TP153 C917 CCZB1H561K C CERA 50V B 560PF K154 C918 CCZF1H103Z C CERA 50V F 0.01MF Z155 C919 CCZB1H102K C CERA 50V B 1000PF K (AXIAL)156 C920 CEXF1E470C C ELECTRO 25V RUS 47MF (5X11) TP157 C921 CCZB1H101K C CERA 50V B 100PF K (AXIAL)158 C922 CCXB1H472K C CERA 50V B 4700PF K (TAPPING)159 C923 CCXB1H472K C CERA 50V B 4700PF K (TAPPING)160 C924 CCZB1H101K C CERA 50V B 100PF K (AXIAL)161 C925 CEXF2E220V C ELECTRO 250V RSS 22MF (13X20) TP162 C941 CEXF2C470V C ELECTRO 160V RSS 47MF (13X25) TP163 C942 CEXF2C100V C ELECTRO 160V RSS 10MF (10X16) TP164 C943 CEXF2C470V C ELECTRO 160V RSS 47MF (13X25) TP165 C944 CXSL2H470J C CERA 500V SL 47PF J (TAPPING)


-40-


166 C945 CEXF2C100V C ELECTRO 160V RSS 10MF (10X16) TP167 C946 CEXF1C331V C ELECTRO 16V RSS 330MF (8X11.5) TP168 C947 CMXL2E104K C MYLAR 250V MEU 0.1MF K169 D905 DUZ12BM—- DIODE ZENER UZ-12BM (UNIZON)170 D906 D1N4148—- DIODE 1N4148 (TAPPING)171 D907 D1N4148—- DIODE 1N4148 (TAPPING)172 D908 D1N4148—- DIODE 1N4148 (TAPPING)173 D909 D1N4148—- DIODE 1N4148 (TAPPING)174 D910 D1N4148—- DIODE 1N4148 (TAPPING)175 D911 D1N4004S— DIODE 1N4004S176 D912 D1N4004S— DIODE 1N4004S177 D913 DUZ9R1BM— DIODE ZENER UZ-9.1BM 178 D914 D1N4148—- DIODE 1N4148 (TAPPING)179 D915 D1N4148—- DIODE 1N4148 (TAPPING)180 D916 D1N4148—- DIODE 1N4148 (TAPPING)181 D917 D1N4148—- DIODE 1N4148 (TAPPING)182 D920 D1N4937G— DIODE 1N4937G (TAPPING)183 D921 D1N4937G— DIODE 1N4937G (TAPPING)184 D922 D1N4937G— DIODE 1N4937G (TAPPING)185 E054 4856310300 EYE LET BSR T0.2 (R1.6)186 E055 4856310300 EYE LET BSR T0.2 (R1.6)187 E070 4856310300 EYE LET BSR T0.2 (R1.6)188 E071 4856310300 EYE LET BSR T0.2 (R1.6)189 E072 4856310300 EYE LET BSR T0.2 (R1.6)190 E073 4856310300 EYE LET BSR T0.2 (R1.6)191 G901 4SG0DX0001 SPARK GAP SSG-102-A1(1.0KV) TAP192 G902 4SG0DX0001 SPARK GAP SSG-102-A1(1.0KV) TAP193 G903 4SG0DX0001 SPARK GAP SSG-102-A1(1.0KV) TAP194 J178 85801065GY WIRE COPPER AWG22 1/0.65 TIN COATING195 J908 85801065GY WIRE COPPER AWG22 1/0.65 TIN COATING196 J910 85801065GY WIRE COPPER AWG22 1/0.65 TIN COATING197 J913 85801065GY WIRE COPPER AWG22 1/0.65 TIN COATING198 J914 85801065GY WIRE COPPER AWG22 1/0.65 TIN COATING199 J915 85801065GY WIRE COPPER AWG22 1/0.65 TIN COATING200 J916 85801065GY WIRE COPPER AWG22 1/0.65 TIN COATING201 J918 85801065GY WIRE COPPER AWG22 1/0.65 TIN COATING202 J922 85801065GY WIRE COPPER AWG22 1/0.65 TIN COATING203 L901 5MC0000100 COIL BEAD HC-3550204 L902 5MC0000100 COIL BEAD HC-3550205 L903 5MC0000100 COIL BEAD HC-3550206 P401 485923202S CONN WAFER YW025-07 (STICK)207 P501 485923192S CONN WAFER YW025-06 (STICK)208 P903 4859238620 CONN WAFER YPW500-02209 P904 4859205620 CONN WAFER LW-0640-03210 PA401 4850707S02 CONNECTOR YH025-07+YST025+ULW=400211 PA501 4850706S02 CONNECTOR YH025-06+YBNH250+ULW=400212 Q902 TKTC3198Y- TR KTC3198Y213 Q903 TKTC3198Y- TR KTC3198Y214 Q904 TKTC3198Y- TR KTC3198Y215 Q905 TKTC3198Y- TR KTC3198Y216 Q906 TKTC3198Y- TR KTC3198Y217 Q907 TKTA1266Y- TR KTA1266Y (TP)218 Q908 PTE2SW6901 HEAT SINK ASS`Y TKTA1659Y- + 7174300811219 Q909 PTB2SW6900 HEAT SINK ASS`Y TKTC4370Y- + 7174300811220 Q910 TKTA1266Y- TR KTA1266Y (TP)221 R401A RN02B102JS R METAL FILM 2W 1K OHM J SMALL


-41-


222 R557 RD-AZ223J- R CARBON FILM 1/6 22K OHM J223 R558 RD-AZ101J- R CARBON FILM 1/6 100 OHM J224 R559 RD-AZ221J- R CARBON FILM 1/6 220 OHM J225 R921 RC-2Z102K- R CARBON COMP 1/2 1K OHM K226 R922 RD-2Z100J- R CARBON FILM 1/2 10 OHM J227 R924 RD-AZ102J- R CARBON FILM 1/6 1K OHM J228 R925 RD-AZ471J- R CARBON FILM 1/6 470 OHM J229 R926 RD-2Z471J- R CARBON FILM 1/2 470 OHM J230 R927 RD-AZ470J- R CARBON FILM 1/6 47 OHM J231 R928 RD-AZ223J- R CARBON FILM 1/6 22K OHM J232 R929 RD-AZ273J- R CARBON FILM 1/6 27K OHM J233 R930 RD-AZ333J- R CARBON FILM 1/6 33K OHM J234 R932 RD-AZ392J- R CARBON FILM 1/6 3.9K OHM J235 R933 RD-AZ392J- R CARBON FILM 1/6 3.9K OHM J236 R934 RD-AZ393J- R CARBON FILM 1/6 39K OHM J237 R935 RD-AZ563J- R CARBON FILM 1/6 56K OHM J238 R936 RD-AZ103J- R CARBON FILM 1/6 10K OHM J239 R937 RD-AZ820J- R CARBON FILM 1/6 82 OHM J240 R938 RD-2Z100J- R CARBON FILM 1/2 10 OHM J241 R939 RD-AZ820J- R CARBON FILM 1/6 82 OHM J242 R940 RD-AZ122J- R CARBON FILM 1/6 1.2K OHM J243 R941 RD-AZ152J- R CARBON FILM 1/6 1.5K OHM J244 R942 RD-AZ683J- R CARBON FILM 1/6 68K OHM J245 R943 RD-AZ683J- R CARBON FILM 1/6 68K OHM J246 R944 RD-AZ123J- R CARBON FILM 1/6 12K OHM J247 R945 RD-AZ122J- R CARBON FILM 1/6 1.2K OHM J248 R946 RD-AZ152J- R CARBON FILM 1/6 1.5K OHM J249 R947 RD-4Z620J- R CARBON FILM 1/4 62 OHM J250 R948 RD-2Z279J- R CARBON FILM 1/2 2.7 OHM J251 R950 RD-2Z279J- R CARBON FILM 1/2 2.7 OHM J252 R951 RS01Z331J- R M-OXIDE FILM 1W 330 OHM J (TAPPING)253 R952 RD-4Z620J- R CARBON FILM 1/4 62 OHM J254 R953 RN02B221JS R METAL FILM 2W 220 OHM J SMALL255 R954 RS02Z189JS R M-OXIDE FILM 2W 1.8 0HM J SMALL256 R955 RD-AZ182J- R CARBON FILM 1/6 1.8K OHM J257 R956 RS02Z102JS R M-OXIDE FILM 2W 1K OHM J SMALL258 R957 RD-4Z105J- R CARBON FILM 1/4 1M OHM J259 R958 RD-2Z102J- R CARBON FILM 1/2 1K OHM J260 R959 RD-AZ101J- R CARBON FILM 1/6 100 OHM J


* NO 1~127 - DIFFERENT PARTS* NO 128~260 - 27INCH ONLY * C315 C903 C910 C911 C965 D901 D903 E062 E063 E064 E065 E074 E079 J705 J903 P502

PA502 Q901 R315 R401 R881 R901 - 21INCH ONLY

-42-

EXPLODE VIEW

32 4 765 8 9

11

12 13

14

15 16

17 19

10

18

MODEL

REFERENCE

SCALE

UNITS mm

D

NDaewoo Electronics Corp.Mechanical Design Team, TV Research Center

( 1 / 1 )0.250

NO PART CODE PART NAME QTY MATERIAL REMARKS

1

MAIN PCB 1

2

4852081000 FRONT MASK 1 FR HIPS GY

3

4854862100 BUTTON POWER 1 FR ABS GY

4

4854952500 BUTTON CH 1 FR ABS GY

5

4855546800 DECO SENSOR 1 GPPS

6

4855617400 MARK BRAND 1 CU AU+ABS BK

7

4856013302 2

8

4856013300 SCREW CRT FIXING 2 30X80 BK

9

4856219502 WASHER RUBBER 4 CR T2.0 BLACK

10

4856716000 SPRING 1 SWPA PIE0.5

11

12

13

7121301212 SCREW TAPPING 3

14

7122401412 5

15

7178301011 SCREW TAPPTITE 8 TT2 WAS 3X10 MFZN

Designed by Checked by Inspected by Approved by

BAE.J.H

DTQ-20U4SC

ASSY NAMEDEVELOPMENT DWG

485009M6

2

18

17

16

19 4855415800 SPEC PLATE 1 15ART P/E FILM (C/TV)

4852161700 CLOTH BLACK FELT 400X20X0.72

COVER BACK4852161700 1 FR HIPS GY

CRT AS 1

CN-230F

CN-230F

SCREW TAPPTITE TT2 WAS 3X10 MFZN7178301011

SCREW CRT FIXING 30X190 BK

SCREW TAPPTITE TT2 TRS 4X14 MFZN BK

TT2 TRS 3X12 MFZN BK

4858314010 SPEAKER 2 SP-5070F01 3W 8OHM

1

DTQ-20U4SC

-43-

EXPLODE VIEW

3

4

5

6

7

8

9

10

11

12

13

14

15

16

17

18

19

20

1 2 3 4 5 6 7 8 9

10 11 13 14 15

16

17

18 19 2012

BUTTON POWER

SPRING

MARK BRAND

MASK FRONT

BUTTON CTRL AS

TAPPING SCREW

SPEAKER

TAPPING SCREW

CN_230F CHASSIS

CRT FIX SCREW

CRT FIX SCREW

CRT

COVER BACK

TAPPING SCREW

TAPPING SCREW

TAPPING SCREW

21

21

TAPPING SCREW

P.E BAG

PAD

CARTON BOX 1

1

1

1

1

1

4

1

2

1

2

4

1

2

1

8

2

1

1

48581

4858061500

7172401412

7172401412

7178301011

7178301011

4852161700

4856013300

4856013303

WASHER RUBBER4856219502

7178301011

4851946500

48583014010

4852081900

4855617500

4856717900

4854862100

7178301011

DW-3

EPS

TT2 TRS 4X14 MFZN

TT2 WAS 3X10 MFZN

FR HIPS GY

30X250 YL

30X80 BK

CR T2.0 BLACK

TT2 WAS 3X10 MFZN

4952500+5546800

TT2 WAS 3X10 MFZN

SP_5070F01

FR HIPS GY

CU AU+ABS BK

SWPA PIE 0.5

ABS GY

SAMSUNG 21" FLAT CRT

TT2 AWS 3X10 MFZN

TT2 TRS 4X14 MFZN

MODEL

REFERENCE

SCALE

UNITS mm

D


( 1 / 1 )0.280


1 1

2 1


Han k s Han k s

DTQ-2033SC

PART NAMEDEVELOPMENT.DWG

485009JE

DTQ-2033SC

-44-

EXPLODE VIEW

2 3 4 5 6 7 8 9 10

11

12

15

13

14

16 17 18

MODEL

REFERENCE

SCALE

UNITS mm

D


( 1 / 1 )0.200


1 4852083400 MASK FRONT 1 FR HIPS GY


AHN.J.S

DTQ-27U4SC

ASSY NAMEDEVELOPMENT DWG

485009KL

SCREW CRT FIXING

SCREW TAPPING

CRT AS

BUTTON POWER

MARK BRAND48556174SD4

4856716000

4854862100

3

2

SPRING

7172401612 SCREW TAPPTITE15

4858310810

7178301011

7172401212

4856219502

4856015821

4855549100

4854954900

7

6

5

9

8

12

11

10

14

13

SPEAKER

SCREW TAPPTITE

SCREW TAPPTITE

DECO SENSOR

BUTTON CH

MAIN PCB

WASHER RUBBER

COVER BACK

4857817630

4855415800

7178301212

18

16

17

CLOTH BLACK

SPEC PLATE

SILVER DIA-CUTTING1

SWPA PIE0.5

FR ABS GY

1

1

9

SP-58126F01

SWRW+SK5 L=35

TT2 WAS 3X10 MFZN

FR HIPS GY

TT2 TRS 4X12 MFZNBK

CR T2.0 BLACK

FR ABS GY

1

2

8

1

2

GPPS

4

4

1

1

1

TT2 WAS 3X12 MFZN BK

FELT 400X20X0.7

15ART P/E FILM (C/TV)

3

2

1

4852163000

TT2 TRS 4X16 MFZN BK

CN-230F

1

DTQ-27U4SC

-45-

PRINTED CIRCUIT BOARD (CN-230F/MAIN)

-46-

PRINTED CIRCUIT BOARD(CN-230F/20U4 CRT)

-47-

PRINTED CIRCUIT BOARD(CN-230F/27U4 CRT)

-48-

IC DESCRIPTION

1. Pin Congiguration

NC

NC

NC

NC

AV OP

INCH OP

NC

Spare

Vss

XT1

XT2

VDD

KEY IN

AFT IN

NC

A/D

RESET

FILTER

CVBS in

VS(inv)

HS(inv)

POWER

D/G SW

A mute

V SW

MSPRES

NC

VDPRES

ST LED

RC IN

I/O

I/P I/O

S-VHS

SCL1

SDA1

SCL2

SDA2

OSD I

OSDblk

OSD B

OSD G

OSD R

I701

DW8638TA1

*SCL1/SDA1 -> VDP/MSP/EEPROM, SCL2/SDA2 -> TUNER.

Appendix

-49-

IC DESCRIPTION Appendix

PIN PIN NAME DESCRIPTION DEF ACT I/O PUD STB1 P10 NC D2 P11 NC - D3 P12 NC - D4 P13 NC - D -5 P14 AV(CVBS in) OPTION

H : AV1~AV2, CVI ; L : AV1~AV3, CVI - H I U -6 P15 INCH OPTION D7 P16 NC D8 P17 NC(Spare)9 VSS GND

10 XT1 Crystal INPUT I11 XT2 Crystal OUTPUT O12 VDD Supply Voltage(+5V) -13 P84/AN4 Key INPUT - - I U H14 P85/AN5 AFT Signal INPUT - H I - L15 P86/AN6 NC - I -16 P87/AN7 NC - I -17 RES(inv) Reset - L I - H18 FILT MCU PLL Filter19 CVBSIN Composite Video (Closed Caption) H I20 VS(inv) Vertical Sync L I U H21 HS(inv) Horizontal Sync L I U H22 R OSD RED Signal OUTPUT H O23 G OSD GREEN Signal OUTPUT H O24 B OSD BLUE Signal OUTPUT H O25 BL OSD BLANKING Signal OUTPUT H O26 I OSD Intensity 27 SDA0 Tuner serial data OUTPUT H O U28 SCLK0 Tuner clock OUTPUT H O U29 SDA1 IC serial data INPUT/OUTPUT H I/O U30 SCLK1 IC clock OUTPUT H O U31 S-VHS S-JACK ‘H’input - DEFAULT ‘H’*P70 L H I -32 P71 NC I33 P72 NC34 P73 Remote control Signal INPUT L I H35 P00 NC36 P01 VDP3130Y reset OUTPUT L H O - L37 P02 NC -38 P03 MSP3420G reset OUTPUT L H O - L39 P04 Video SW OUTPUT : ONLY AV4 ‘H’ L H O - L40 P05 Audio mute OUTPUT L H O - L41 P06 Degaussing Coil SW OUTPUT L H O - L42 P07 Stand-by Power SW OUTPUT L H O - H

2. Pin Description

NOTE : DEF(default), ACT(Active), I/O(Input/Output), PUD(Pull-up/-down), STB(Stand-by)

-50-

IC DESCRIPTION

3. Pin Congration

TEST

RESQ

SCL

SDA

GNDD

HCS

FSY

CSU

VS

INTLC

VPROT

SAFETU

HFLB

GNDD

VSUPD

GNDD

VSUPD

P0

P1

P2

P3

P4

P5

P6

GNDD

RSW2

RSW1

SENSE

GNDM

VERTQ

VERT

E/W

VIN4

VIN3

VIN2

VIN1

CIN1

VOUT

VSUPAF

VRT

SGND

GNDAF

CBIN

CIN2/CRIN

XTAL2

XTAL1

HOUT

CLK20

FBLIN2

BIN2

GIN2

RIN2

FBLIN

BIN

GIN

RIN

VRD

BOUT

GOUT

ROUT

VSUPAB

GNDAB

SVMOUT

XREF

I501

VDP3130Y

1

2

3

4

5

6

7

8

9

10

11

12

13

14

15

16

17

18

19

20

21

22

23

24

25

26

27

28

29

30

31

32

64

63

62

61

60

59

58

57

56

55

54

53

52

51

50

49

48

47

46

45

44

43

42

41

40

39

38

37

36

35

34

33

Appendix

-51-


4. Pin Description

Pin No. Pin Name Type Short Description1 TEST IN Test Input2 RESQ IN Reset Input3 SCL IN/OUT I2C Bus Clock4 SDA IN/OUT I2C Bus Data5 GNDD SUPPLY Digital Ground6 HCS IN Half Contrast Switch Input7 FSY OUT Front Sync Out8 CSY OUT Composite Sync Output9 VS OUT Vertical Sync Output10 INTLC OUT Interlace Control Output11 VPROT IN Vertical Protection Input12 SAFETY IN Safety Input13 HFLB IN Horizontal Flyback Input14 GNDD SUPPLY Digital Ground15 VSUPD SUPPLY Digital Supply Voltage(3.3v)16 GNDD SUPPLY Digital Ground17 VSUPD SUPPLY Digital Supply Voltage(3.3v)18 P0 IN/OUT Port 1, Bit 019 P1 IN/OUT Port 1, Bit 120 P2 IN/OUT Port 1, Bit 221 P3 IN/OUT Port 1, Bit 322 P4 IN/OUT Port 1, Bit 423 P5 IN/OUT Port 1, Bit 524 P6 IN/OUT Port 1, Bit 625 GNDD SUPPLY Digital Ground26 RSW2 OUT Range Switch 2 for Measurement ADC27 RSW1 OUT Range Switch 1 for Measurement ADC28 SENSE IN Sense ADC Input29 GNDM SUPPLY Ground, MADC Input30 VERTQ OUT Inverted Vertical Sawtooth Output31 VERT OUT Vertical Sawtooth Output32 E/W OUT Vertical Parabola Output33 XREF IN Reference Input for RGB DACs34 SVMOUT OUT Analog Scan Velocity Modulation Output35 GNDAB SUPPLY Analog Ground Backend36 VSUPAB SUPPLY Analog Supply Voltage(5.0v)Backend37 ROUT OUT Analog Red Output38 GOUT OUT Analog Green Output39 BOUT OUT Analog Blue Output40 VRD IN DAC Reference41 RIN IN Analog Red Input42 GIN IN Analog Green Input43 BIN IN Analog Blue Input44 FBLIN IN Fast Blank Input

-52-


Pin No. Pin Name Type Short Description45 RIN2 IN Analog Red Input246 GIN2 IN Analog Green Input247 BIN2 IN Analog Blue Input248 FBLIN2 IN Fast Blank Input49 CLK20 OUT 20.25MHz System Clock Output50 HOUT OUT Horizontal Drive Output51 XTAL1 IN Analog Crystal Input52 XTAL2 OUT Analog Crystal Output53 CIN2/CRIN IN Analog chroma2/component CR Input54 CBIN IN Component CB Input55 GNDAF SUPPLY Analog Ground Frontend56 SGND IN Signal Ground for Analog input57 VRT IN Reference Voltage Top58 VSUPAF SUPPLY Analog Supply Voltage(5.0V)Frontend59 VOUT OUT Analog Vodeo output60 CIN1 IN Analog Chroma 1 Input61 VIN1 IN Analog Video 1 Input62 VIN2 IN Analog Video 2 Input63 VIN3 IN Analog Video 3 Input64 VIN4 IN Analog Video 4 Input

-53-

WAVEFORMS

(2) T801 PIN17 POWER ON (2) T801 PIN17 STAND-BY

0

(1) I801 PIN7 POWER ON (1) I801 PIN7 STAND-BY

(4)T402 PIN1 HOR.OUT(3) I501 PIN50 HOUT

Appendix

-54-

WAVEFORMS Appendix

(5) T402 PIN3 200V LINE (6) T402 PIN9 HEATER LINE

(7) T402 PIN4 12V LINE (8) T402 PIN6 27V LINE

(9) I501 PIN31 VERTICAL RAMP (10) I501 PIN32 E/W

-55-

WAVEFORMS Appendix

(11) CVBS (Composite Video) (12) I501 PIN52 VDP X-TAL

(13) I501 PIN11 VSYNC (14) SVM Q902 BASE

(15) SVM Q906 BASE (16) SVM Q907 BASE

-56-

WAVEFORMS Appendix

(17) SVM Q909 BASE (18) I901 PIN7 ROUT

-57-

TROUBLESHOOTING GUIDE Appendix

Drain 76

I801

MR

2520 5

43

21

Vin

Vcc

GND

F / B

Z / C

Source/OCL

FB01

L801

R801C803

C802

D801125V 5A

+ +

++

L805C820C814

R814 R813

R822C818

D804 R862

C819

OCP

+133V

+45V

+12V(Sound)

+5V

(St-By)

Q871

R827 Q873 R877 (Micom Power on/off)PWR on : HPWR off : L

R873D806

R802

456

78

32

1

D871

I803

R868I804

LTV817

I804LTV827

I805LTV817

D811C891

D804

D802C892

C807

R805

D810R892

R891

L802

C809

CheckWaveform

#8

#7

+#11

#10 +12V

C871R872

R869

R879R870 R878

C812R818

R817

Q805

C706

D812

+D813

C832

C815+

+

D808

C817

D807L807

C813

+133V

#2

#3

#4

R807

C804

+

T801TSM-5345B9

L806+45V

+13.5V#9

#14

#12

#13

R893

R874

R876

CheckF801(125V/5A)

CheckR801(10W,1)

CheckVoltage

Checkvoltage

CheckVoltage

1.NO POWER

-58-


2.NO PICTURE

33V 5V

Composite Video

Checkclock/datasignal

#61

#27 #28

#29 SDA #4 #30 SCL #3

#10 #11 #12

X70132.768KHz

ST-BY 5V

Check the crystal

(d)Check composite video #61

Check Vsup(+5V) #58

#17 check Vsup(+3.3V)

Check HOUT #50 #15

#39 I501Check RGB Signal OUTPUT#38

#37 Check

200V LINE

Check Vsup(+5V) #36 D405

T402 FBT D406

Checkheater voltage

Check clock/data signal

MICOM

check the waveform of I501 #61

I501VDP3130Y

NG : Go to the figure (c)OK : Go to the figure (d)

U101 TUNER CVBST-DATA T-CLOCK

I701

Check the VOLTAGE

-59-


3. NO SOUND

(e)33V 5V

SIF OUTCheck X601 the crystal

18.432MHz

#58 #63 #62

#27 #28

#57 Check Vsup +5V

#29 #10 #39 Check Vsup +8V

#30 SDA #9 #18 Check Vsup +5V

#10 #11 #12 SCL

X70132.768KHz

ST-BY 5V Check clock/data signal

Check the crystal

(f)

Check Vcc of sound AMP

Sound B+ 14V #3#16 Check audio output signal

#1 Speaker L #14 Speaker R

Audio input L #6 I602TDA8944J

Audio input R #12

#4 H-phone L MUTE #10

#17 H-phone R

Check audio input signal

Check MSP output data signal of I601 #28, #29

U101 TUNER SIFT-DATA T-CLOCK

NG : Go to the figure (e)OK : Go to the figure (f)

I701MICOM

I601MSP

-60-


4. CH DON’T MEMORY or SKIP

(g) 33V 5V

Check 5V/33V LINE

U101 Check Composite Video Signal

TUNER CVBST-DATA T-CLOCK

Check T-SDA/SCL

#27 #28 #61

#29 SDA #4 #30 SCL #3

#10 #11 #12

SDA X70132.768KHz ST-BY 5V SCL

Check the crystal #5 #6

Check SDA/SCL

#8

ST-BY 5V

Check the input signal conditions

I701

NG : Loss of signal or weak signal OK : Go to the figure (g)

MICOMI501VDP

I703 EEPROM

-61-


5. NO COLOR

6. NO VERTICAL DEFLECTION

Check CVBS Waveform

R OUT#37

#36

#58

#51

Check the crystal

Check the Voltage

Check Vout signal

Check Vertical signal

Vertical D.Y

Check the Voltage(27V)

I301 Vcc 27V

Check R/G/B signal

X501

X501

Vsup 5V

Vsup 5V

Vsup 3.3V

#61

I501VDP3130Y

I501VDP3130Y

I301LA7848

#52

#38

#39#16#15

#51#52

#31#5 Vin

#2 Vout

#6 Vcc

Vertical OUTPUT

G OUT

B OUT

-62-


7. NO ON-SCREEN DISPLAY

8. REMOTE CONTROL DOES NOT OPERATE

V. SYNC

Check the signal(60Hz) Check data/clock signal

I501VDP3130Y

IL701REMOCONPREAMP

I701MICOM

I701MICOM

H. SYNC

ST-BY 5V

ST-BY 5V

ST-BY 5V

#20

#22#23#24#25

#41#42#43#44

#12#11#10

#12

#34

#11#10

X701

Checkthe crystal

X701Checkthe crystal

Check OSD R/G/B/BLANK signal

Check the waveform

If OSD doesn’t operate,I701 replace new product

Checkthe signal(15.73Hz)

SDASCL

OSD ROSD GOSD BBLANK

OUT

#21

PRINTED DATE : Mar. 2003

INSTRUCTION MANUAL

Color Television

DTQ 20U4SC

DTQ 27U4SC

CAUTIONRISK OF ELECTRIC SHOCK

DO NOT OPEN

CAUTION : TO REDUCE THE RISK OF ELECTRIC SHOCK,DO NOT REMOVE COVER (OR BACK)

NO USER-SERVICEABLE PARTS INSIDE.REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.

The lightning flash with arrowhead symbol, within an equilateral triangle, is intended toalert the user to the presence of uninsulated “dangerous voltage” within the product’senclosure that may be of sufficient magnitude to constitute a risk electric shock.

The exclamation point within an equilateral triangle is intended to alert the user to thepresence of important operating and servicing instructions in the literature accompanyingthe appliance.

WARNINGTO REDUCE THE RISK OF FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS APPLIANCE TO RAIN ORMOISTURE.

CAUTIONCHANGES OR MODIFICATIONS NOT EXPRESSLY APPROVED BY THE MANUFACTURER COULD VOIDTHE USER’S AUTHORITY TO OPERATE THE EQUIPMENT.

NOTE TO CATV SYSTEM INSTALLERTHIS REMINDER IS PROVIDED TO CALL THE CATV SYSTEM INSTALLER'S ATTENTION TO ARTICLE820-40 OF THE NEC THAT PROVIDES GUIDELINES FOR PROPER GROUNDING AND, IN PARTICULAR,SPECIFIES THAT THE CABLE GROUND SHALL BE CONNECTED TO THE GROUNDING SYSTEM OF THEBUILDING, AS CLOSE TO THE POINT OF CABLE ENTRY AS PRACTICAL.

CAUTIONThe AC power cord provided with this product is polarized (one blade wider than the other).To prevent electrical shock, match wide blade of plug to wide slot, fully insert the AC plug into a stan-dard 120V~, 60Hz polarized outlet.

NOTENever connect the plug to an electrical source other than one providing 120V~, 60Hz power. Use only the attached powercord. If the polarized AC cord does not fit into a non-polarized outlet, do not cut or file the blade. You are responsible for hav-ing the obsolete outlet replaced with a polarized outlet.

If you feel a static discharge when touching the unit, and the unit does not function, simply unplug the unit from the outlet.When you plug the unit back in, it should work normally.

Do not install power cords near any heating element or cooking appliances.

Important Safeguards

S A F E T Y

IMPORTANT SAFEGUARDSPLEASE READ ALL THESE INSTRUCTIONS REGARDING YOUR TELEVISION EQUIPMENT ANDRETAIN FOR FUTURE REFERENCE. FOLLOW ALL WARNINGS AND INSTRUCTIONS MARKEDON THE TV RECEIVER.

1 Read all of these instructions.

2 Save these instructions for later use.

3 Unplug this television equipment from the walloutlet before cleaning. Do not use liquid clean-ers or aerosol cleaners. Use a damp cloth forcleaning.

4 Do not use attachments not recommended bythe television equipment manufacturer as theymay result in the risk of fire, electric shock orother personal injury.

5 Do not use this television equipment nearwater, for example, near a bathtub, washbowl,kitchen sink, or laundry tub, in a wet basement,or near a swimming pool, or the like.

6 Do not place this television equipment on anunstable cart, stand, or table. The televisionequipment may fall, causing serious injury to achild or adult, and serious damage to the equip-ment. Use only with a cart or stand recom-mended by the manufacturer, or sold with thetelevision equipment. Wall or shelf mountingshould follow the manufacturer's instructions,and should use a mounting kit approved by themanufacturer.

6A An appliance and cart combination should bemoved with care. Quick stops, excessive force,and uneven surfaces may cause the applianceand cart combination to overturn.

7 Slots and openings in the cabinet and the backor bottom are provided for ventilation and toensure reliable operation of the televisionequipment; and to protect it from overheating,these openings, must not be blocked or covered.The openings should never be blocked by plac-ing the television equipment on a bed, sofa, rug,or other similar surface. (This equipment shouldnever be placed near or over a radiator or heatregister.) This television equipment should notbe placed in a built-in installation, such as abookcase, unless proper ventilation is provided.

8 This television equipment should be operatedonly from the type of power source indicated onthe marking label. If you are not sure of thetype of power supplied to your home, consultyour television dealer or local power company.

9 This television equipment is equipped with apolarized alternating current line plug (a plughaving one blade wider than the other). Thisplug will fit into the power outlet only one way.This is a safety feature. If you are unable toinsert the plug fully into the outlet, try reversingthe plug. If the plug should still fail to fit, con-tact your electrician to replace your obsoleteoutlet. Do not defeat the safety purpose of thepolarized plug.

10 Do not allow anything to rest on the powercord. Do not locate this television equipmentwhere the cord will be abused by persons walk-ing on it.

11 Follow all warnings and instructions marked onthe television equipment.

12 For added protection for this television equip-ment during a lightning storm, or when it is leftunattended and unused for long periods of time,unplug it from the wall outlet and disconnectthe antenna or cable system. This will preventdamage to the equipment due to lightning andpower-line surges.

PORTABLE CART WARNING

S3126A

Important Safeguards

13 An outside antenna system should not be locat-

ed in the vicinity of overhead power lines or

other electric light or power circuits, or where it

can fall into such power lines or circuits. When

installing an outside antenna system, extreme

care should be taken to keep from touching such

power lines or circuits, as contact with them

might be fatal.

14 Do not overload wall outlets and extension

cords, as this can result in fire or electric shock.

15 Never push objects of any kind into this televi-

sion equipment through openings, as they may

touch dangerous voltage points or short-out

parts that could result in a fire or electric shock.

Never spill liquid of any kind on the television

equipment.

16 Do not attempt to service this television equip-

ment yourself, as opening or removing covers

may expose you to dangerous voltage or other

hazards. Refer all servicing to qualified service

personnel.

17 Unplug this television equipment from the wall

outlet and refer servicing to qualified service

personnel under the following conditions:

(a) When the power-supply cord or plug is dam-

aged or frayed.

(b) If liquid has been spilled, or objects have fall-

en into the television equipment.

(c) If the television equipment has been exposed

to rain or water.

(d) If the television equipment does not operate

normally by following the operating instruc-

tions. Adjust only those controls that are cov-

ered by the operating instructions as an

improper adjustment of other controls may

result in damage and will often require exten-

sive work by a qualified technician to restore

the TV receiver to its normal operation.

(e) If the television equipment has been

dropped or the cabinet has been damaged.

(f) When the television equipment exhibits a

distinct change in performance - this indi-

cates a need for service.

18 When replacement parts are required, be sure

the service technician has used replacement

parts specified by the manufacturer that have

the same characteristics as the original part.

Unauthorized substitutions may result in fire,

electric shock or other hazards.

19 Upon completion of any service or repairs to

this television equipment, ask the service tech-

nician to perform safety checks to determine

that the television is in a safe operating condi-

tion.

20 If an outside antenna or cable system is con-

nected to the television receiver, be sure the

antenna or cable system is grounded so as to

provided some protection against voltage

surges and built-up static charges.

Section 810 of the National Electrical Code,

ANSI/NFPA N0.70-1984, provides information

with respect to proper grounding of the mast

and supporting structure, grounding of the

lead-in wire to an antenna discharge unit, size

of grounding conductors, location of

antenna-discharge unit, connection to ground-

ing electrodes, and requirements for the ground-

ing electrode.

Daewoo Electronics America Inc.120 Chubb Avenue,Lyndhurst, NJ 07071

Dear Customer :

Daewoo Electronics America Inc. would like to thank you for choosing this color television receiver. Itincorporates a host of features designed to give you excellent performance for many years to come.

We realize that you’re eager to turn it on and begin enjoying the high-quality pictures it delivers just asquickly as possible, but we ask you to take a few minutes to read the instructions in the booklet to familiarizeyourself with the receiver, its functions and some features which may be new to you. If you follow theinstructions, this unit should give you many years of viewing pleasure.

If for any reason it does not, we want to hear about it. Please write to us at the address above. Daewooalways welcomes comments and suggestions on this or any of our other products.

On the other hand, when you discover the enjoyment, reliability and ease of use that is built into it, wehope that you will tell your friends, and consider Daewoo when you make your next purchase of homeentertainment equipment.

In addition to TV receivers, Daewoo produces a full line of audiovisual products built to the same highdesign, engineering, and manufacturing standards as this unit.

Here are a few tips that will keep your TV receiver looking great and performing for years to come.

. Avoid putting it in excessively hot locations. Damage to the cabinet or premature component failurescan result.

. There are ventilation holes in the bottom and rear of the cabinet. Make sure that they remain unob-structed. Do not place the receiver on top of a thick cloth.

. If you don’t plan to use the receiver for several days, it’s a good idea to unplug it from the power outlet.

. Many common household cleaning agents, sprays, solvents, and polishes will cause permanent damage tothe surface of the cabinet. The best cleaning agents are mild soap and a damp cloth.

Again, thank you for choosing this Daewoo product. We have employed advanced engineering techniquesin its design, and manufactured it in one of the world’s most up-to-date production facilities. The result isa TV receiver that we know you will be as proud to own as we were to create.

Very truly yours,Daewoo Electronics America Inc.

CONTENTS

1Table of Contents

Table of ContentsChapter 1: Overview of Your Equipment 2

Your TV's Front Panel 2Your TV's Back Panel 3Your Remote Control 4

Installing your remote control batteries 5Notes 5

Chapter 2: Connecting an Antenna or Cable to Your TV 6Connecting an Antenna 6Connecting a Cable System 7Connecting Other Pieces of Equipment 8Safety Note 8

Chapter 3: Operating Your TV 9Turning your TV On 9Programming Your TV's Channel Memory 9Changing Channels 10Changing the Volume 10Changing The TV's Channel Memory 11

Adding/Deleting a channel to memory 11Displaying the Current Channel 11Changing the TV’s Input 12Adjusting Video Settings 13

Returning to the factory settings 14Descriptions of video settings 14

Chapter 4: Using Timer Functions 15Setting the Clock 15Setting the Wake-up Time 15Setting the Off Time 16Canceling the Wake-up Time or Off Time 16Setting the Sleep Timer 17

Chapter 5 : Using the Special Features 18Changing the Language of the On-Screen Menus 18Captioning 18CC on Mute 19Power Restore 19Parental Control Settings, Description of Parental Control Settings 20~21Ch Labels 23

Chapter 6 : Adjusting the Sound 25Selecting stereo/SAP 25Adjusting the Bass 26Adjusting the Treble 27Selecting the Surround Effect 28

Chapter 7 : Troubleshooting 29

Warranty 30

Overview of Your EquipmentYour TV comes with a remote control. The section below summarizes the buttons, controls, and ter-minals that you will use with your TV.

Your TV's Front Panel

1 POWER

Use this button to turn your TV on or off.

2 VIDEO IN jack

Use this jack to receive a video signal from another A/V component.

3 AUDIO IN jack

Use this jack to receive an audio signal from another A/V component.

4 HEADPHONE jack

Use this jack to enjoy the TV sound alone.

5 POWER(red) indicator

This indicator lights up when the power is on.

6 Remote control receiver

This receiver receives a signal from your remote control. Do not block it.

7 WCHV

Use these buttons to change channels on your TV, or to select items in the menu system.

8 CVOLB

Use these buttons to change your TV's volume, to activate selections in the menu system, or to change audio and video settings.

9 MENU

Use this button to turn the TV's menu system on and off.

10 TV/AV

Use this button to select main picture source.

2 Chapter 1 : Overview of Your Equipment

C H A P T E R 1

Your TV's Back Panel

1 Antenna terminal(ANT)

Use this terminal to attach an antenna or cable system to your TV.

2 VIDEO IN

These terminals allow the TV to receive video signals from another A/V components.* S-VIDEO jack is used to receive the separated video signal, such as Y/C signals from the

S-VHS VCR.

3 AUDIO IN

This terminal allows the TV to receive audio signals from another A/V components.

4 VIDEO OUT

This terminal allows the other component to receive a video signal from your TV.* This terminal is not effective on the CVI mode and the S-VIDEO mode.

5 AUDIO OUT

This terminal allows the other component to receive a audio signal from your TV.

6 Y / PB / PR IN(Component Video Input)

This terminal allows the TV to receive a Y/PB/PR signal from another component, such as DVD.

7 COMPONENT INPUT AUDIO IN

This terminal allows the TV to receive an audio signal from another component, such as a DVD.

3Chapter 1 : Overview of Your Equipment

Y

L/MONO

COMPONENTVIDEO

AUDIO S-VIDEO

R

PB

PR

L/MONO

AUDIO

R

VIDEO

AV2 INAV1 INAV4 IN

ANT

MONITOROUT

1 6 7 32 5 4

4 Chapter 1 : Overview of Your Equipment

Your Remote Control

1. POWER

Use this button to turn your TV on or off.

2. MUTE

Use to turn the TV’s sound on and off.

3. WCHV

Use these buttons to change channels on your TV, orselect items in the menu system.

4. CVOLB

Use these buttons to change your TV's volume, toactivate selections in the menu system, or to changeaudio and video settings.

5. MENU

Use this button to turn the TV’s menu system on andoff.

6. DISPLAY

Use this button to display the channel

number and the present status.

7. INPUT

Use this button to select the TV’s signal source.

8. VIDEO

Use this button to display video adjustment items.

9. 0-9

Use these buttons to change channels.

10. SLEEP

Use this button to program the TV to turn off after acertain time.

11. PREVIOUS

Use this button to return to the previous channel youwere watching.

4

1

8

7

11

3

9

10

2

6

3

4

5

5Chapter 1 : Overview of Your Equipment

Installing your remote control batteries

1 Open the battery compartment on the back of the remote control.

2 Install two AA-size batteries (not included) as shown. Make sure the “+” and “-” terminals areoriented correctly.

3 Replace the cover.

Notes

Do not mix different types of batteries together or old batteries with fresh ones.

Remove and replace weak batteries. Weak batteries can leak and damage your controller. Disposeof batteries properly; never throw them into a fire.

Point your remote at the receiver on the center of the front of the TV. Make sure the receiver is notblocked.

The remote control can operate up to 30 feet away from the TV, if you are directly facing the frontof the TV. Operating distance diminishes as you move to the sides of the TV.

6

C H A P T E R 2

Chapter 2 : Connecting an Antenna or Cable to Your TV

Connecting an Antenna or Cable to Your TVYour TV will provide you with the best performance if you connect it to an external antenna orcable system. Follow the directions below make this connection. Please note that you will normallyonly have to make one of the connections shown below, not all of them.

All connections will be made to the antenna terminal on the back of your TV. The antenna terminalis a silver metal post partially surrounded by two plastic tabs. For help in locating the antenna termi-nal, see “Your TV’s Back Panel” on page 3.

Connecting an Antenna

If your antenna ends in a single coaxial lead, simplypress or screw the cable onto the antenna terminal on theback of your TV.

If your antenna ends in a pair of 300 ohm twin leads, you must use a 300-ohm/75-ohmadapter(available at your local electronics store). Place the leads underneath the screws on theadapter, tighten the screws, then press the adapter onto the antenna terminal on the back of the TV.

7Chapter 2 : Connecting an Antenna or Cable to Your TV

Antennas with two sets of leads

You might have two sets of leads from your antenna system, especially if you have one antenna forVHF signals and one antenna for UHF signals.

If your antenna system has both a coaxial lead and twin 300-ohm leads, you must obtain a combin-er (available at your local electronics store). Press or screw the coaxial lead onto the combiner; placethe twin leads underneath the screws on the combiner and tighten the screws. Press the cable fromcombiner onto the antenna terminal on the back of your TV.

If your antenna system has two sets of twin 300-ohm leads, you must obtain a combiner (availableat your local electronics store). Place one set of twin leads underneath the screws on the combinerand tighten the screws. Do the same with the other set of twin leads. Press the cable from the com-biner onto antenna terminal on the back of your TV.

Connecting a cable system

If your cable set-up is not described below, pleasecontact your cable company for more information.

If your cable system does not require the use of acable box, simply press or screw the incomingcable onto the antenna terminal on the back yourTV.

8 Chapter 2 : Connecting an Antenna or Cable to Your TV

If your cable system requires you to use a converter box for all channels, connect the incoming cableto the IN terminal on the converter box. Connect another cable between the OUT terminal on the con-verter box and the antenna terminal on the TV. You will need to keep your TV tuned to channel 3 or 4and change channels using the converter box.

If your cable system only requires you to use a converter box for some channels (i. e. pay-TV chan-nels), follow these steps: Find the primary incoming coaxial cable. Plug this cable into a splitter (avail-able at your local electronics store). Connect one coaxial cable between one OUT terminal on thesplitter and the IN terminal on the converter box. Connect another coaxial cable between the otherOUT terminal on the splitter and the B-IN terminal on an A/B switch (available at your local electron-ics store.) Connect a third coaxial cable between the OUT terminal on the converter box and the A-INterminal on the A/B switch. Finally, connect a coaxial cable between the OUT terminal on the A/Bswitch and the antenna terminal on the back of your TV.

When the A/B switch is in the A position, you need to change channels on the converter box (andyour TV should be tuned to channel 3 or 4); when the A/B switch is in the B position you can changechannels on the TV.

Connecting Other Pieces of Equipment

You may want to connect a VCR, laser disc player, satellite receiver, or another type of equipment toyour TV. We recommend that you follow the instructions included with the piece of equipment youwish to connect.

Safety Note

If you plan on being away from your home for an extended period of time, or if a thunderstorm isapproaching, you should unplug your television, and you may wish to disconnect your TV from arooftop or satellite antenna. You do not need to disconnect your TV from a cable system.

Operating Your TVOnce you have connected your TV to an antenna or cable system, plugged the TV in, and put batter-ies in the remote, you are ready to use the TV. The first thing you should do is to program your TVso it memorizes all of available channels.

Turning Your TV On

1 To turn your TV on, press the POWER button on the remote control. Youcan also use the POWER button on the front panel. Make sure your TV isplugged in before you try to turn it on.

Programming Your TV's Channel Memory

Your TV's memory determines the channels that are available using the WCHV buttons. If a chan-nel is not in memory, you can tune to it with the number buttons, but not with the WCHV buttons.Follow these steps to program your TV's memory:

1 With the TV on, press the MENU button twice, then “Set-Up” menu will appear.

2 Use the WCHV buttons to select “Reception”, then use the CVOLB buttons to select ‘Air’ or‘Cable’. If you connected an antenna to your TV, select ‘Air’; If you connected a cable system,select ‘Cable’.

3 Use the WCHV buttons to select “Memorize Channels”, then use the CVOLB buttons to enterthe “Memorize Channels” process.

4 Press the MENU button to return to Set-Up menu.

5 Wait 20 seconds, or press DISPLAY button or MENU button to return to normal TV viewing.

Your TV's channel memory will not be affected by a power outage. You will not need to re-programthe memory unless you change the type of cable or antenna connected to your TV.

9Chapter 3: Operating Your TV

Select

Set-Up

Language : EnglishReception : AirMemorize ChannelsAdd/Delete ChannelsInput : TV

Adjust Next

3-1

Select

Set-Up


Adjust Next

2

Memorize Channels

Air 11Memorizing all air channels.Please, stand by.

Press MENU to cancel andreturn to Set-Up menu.

3-2 5

Select

Set-Up


Adjust Next

4

C H A P T E R 3

Changing Channels

You can change channels in three ways:

1 The WCHV buttons will take you through all memorized channels,one by one. The WCHV buttons will not access channels that havenot been programmed into the TV's memory. For more informationabout programming channels into memory, see the section“Programming your TV's Channel Memory” on the previous page.

2 The number buttons (0-9) will take you to any channel, even if it hasnot been memorized. To change to a channel, enter its number; theTV will tune to the new channel when you enter the second digit ofthe channel.

3 The PREVIOUS button will take you instantly to the last channelyou were watching.

Changing the Volume

1 To change the volume of the TV set, use the CVOLB buttons onthe remote controller or on the front panel.

2 To quickly turn off the sound, press the MUTE button on the remote.The ‘MUTE’ will appear on screen, colored green. To return the vol-ume to its previous level, press MUTE again.

10 Chapter 3: Operating Your TV

1

2

3

1

2


Changing the TV's Channel Memory

Your TV's memory determines the channels that are available using the WCHV buttons. You canadd channels to this memory or remove them from memory. If a channel is removed from memory,you can tune to it with the number buttons, but you cannot tune to it with the WCHV buttons.

If there are just one channel memorized, then the Add/Delete Channels function will search thewhole channels. But if there are two or more channel memorized, then the Add/Delete Channelsfunction will search the memorized channels only.

Adding/Deleting a channel to memory

1 Use the number buttons to tune to the channel.

2 Press the MENU button twice, then “Set-Up” menu will display.

3 Use the WCHV buttons to select “Add/Delete Channels”, then use the CVOLB buttons toenter the “Add/Delete Channels” process.

4 If the channel is not in memory, then use the CVOLB buttons to add the channel from memory.

5 If the channel is in memory, then use the CVOLB buttons to delete the channel from memory.

6 If you are going to delete other channel, then press the WCHV buttons until desired channel isselected. And press the CVOLB buttons to delete the channel.


Displaying the Current Channel

1 To quickly see the current channel number and status, press DISPLAY button onthe remote control.The current channel number and status will be displayed.

11

1

Select

Set-Up


Adjust Next

3

Select

Set-Up


Adjust Next

2

Add/Delete Channels

Air 11This channel is not in memory.Press VOL to add.Press CH for other channels.

Press MENU to returnto Set-Up menu.

4Add/Delete Channels

Air 11This channel is in memory.Press VOL to delete.Press CH for other channels.


6Add/Delete Channels

Air 11This channel is in memory.Press VOL to delete.Press CH for other channels.


5

Changing the TV's Input

Normally, your TV displays the signal coming through the antenna terminal. However, if you’ve

connected another component to your TV(such as a VCR & DVD) using the Video/Audio input,

you will want to be able to view the signal from the component.

To do this, you will need to switch from the ‘ TV ’ input to the ‘AV1-AV3, CVI’ Input, as follows.

1 With the TV on, press the MENU button twice, then “ Set-Up ” menu will appear.

2 Use the WCHV buttons to select “ Input ”.

3 Press the CVOLB buttons to change the input source from ‘ TV ’ to ‘AV1, AV2, AV3, CVI’.


* CVI means the Component Video Input (Y/ PB/ PR) from the DVD player etc.

* Users can also select these input modes with the TV/AV button or the INPUT button on theremote controller.

* On the AV1 mode , if you connect the S-VHS jack to your TV, "AV1" is changed to "S-VIDEO".


Select

Set-Up

Language : EnglishInput : AV1

Adjust Next

3-1

Select

Set-Up


Adjust Next

2

Select

Set-Up


Adjust Next

3-2

Select

Set-Up

Language : EnglishInput : CVI

Adjust Next

3-4

Select

Set-Up


Adjust Next

3-3


Adjusting Video SettingsYou may wish to adjust the video settings (e. g. contrast or color) to obtain the most pleasing pic-ture. To do so, follow these directions:

1 With the TV on, press the MENU button. then “Video” menu will appear.

2 The “Settings” item will be selected. Use the CVOLB buttons to turn Settings to Preset orCustom.

3 Use the WCHV buttons to select the video setting you wish to adjust. Descriptions of the videosettings are on the next page.

4 Use the CVOLB buttons to adjust the video setting to the level you prefer.

5 Use the WCHV buttons to select another video setting to adjust.

6 When you are finished, press DISPLAY button or MENU button to return to normal TV viewing.

7 Video button on the Remote Controller, can do the same function.

Select

Video

Settings : CustomContrast BrightnessSharpnessColorTint

Adjust Next

1

Select

Video

Settings : PresetContrast BrightnessSharpnessColorTint

Adjust Next

3

Select

Video


Adjust Next

2

Contrast

4 6

Brightness

5


Returning to the factory settings

If you would like to return to the original video settings, as they were calibrated at the factory, fol-low these steps :

1 With the TV on, press the MENU button. then “Video” menu will appear.

2 Press the CVOLB buttons to set the “Settings” to ‘Preset’.

The TV will remember the ‘Custom’ settings you had previously chosen. When you set “Settings”to ‘Custom’ again, your previous custom settings will be restored.

Descriptions of video settings

The contrast setting controls the relation between the light and black areas of the screen. If the lightareas are too bright and are losing details, press the CVOL button; if the picture is gray and lackscontrast, press the VOLB button.

The brightness settings controls the overall amount of light in the picture. If the picture is too bright,press the CVOL button; if the picture is too dark, press the VOLB button.

Sharpness controls how the TV displays edges of objects on-screen. If the TV shows multiple verti-cal lines at the edges of an object, press the CVOL button; if the vertical edges of on-screen objectsare fuzzy, press the VOLB button.

The color setting controls the intensity of color. If the color is over-saturated, press the CVOL but-ton; if the color is washed out, press the VOLB button.

The tint setting controls the relationship of red and green in a picture. Tint is especially noticeable inflesh tones. If flesh tones seem too red or purple, press the VOLB button; if flesh tones are toogreen, press the CVOL button.

Select

Video

Settings : CustomContrast BrightnessSharpnessColorTint

Adjust Next

1

Select

Video


Adjust Next

2

15Chapter 4: Using Timer Functions

Using Timer Functions

Your TV has a built in-clock, and you can set the TV to turn on and off at times that you select. Youcan also set your TV to turn off after counting down a certain amount of time.

Setting the Clock

1 With the TV turned on, press the MENU button until “Time” menu will be displayed.

2 The “Set Clock” item will be selected. Press the CVOLB buttons to set the clock. If you holddown either CVOL or VOLB button, the corresponding numbers will change more quickly.

3 When the clock is set correctly, use the WCHV buttons to select another “Time” function, orpress DISPLAY button or MENU button to return to normal TV viewing.

Setting the Wake-up time

If you enter a time in the “Wake-Up Time” setting, your TV will automatically turn on at that time.Follow these instructions to set the “Wake-Up Time”.

After Wake-up Time turned on the TV set, if user do not input the user control (e.g. remote CH orVOL key) within 2 hours, the TV set will turn off automatically. If user input the user controlwithin 2 hours, the TV set will turn on continuously.It is safety feature for prevent from any kind of problem without human control.


2 Use the WCHV buttons to select “Wake-Up Time” item.

3 If you hold down either CVOL or VOLB button, the corresponding numbers will change morequickly.

4 When the setting is correct, use the WCHV buttons to select another “Time” function, or pressDISPLAY button or MENU button to return to normal TV viewing.

C H A P T E R 4

Select

Time

Set Clock : :Wake-Up Time : :Off Time : :Sleep Timer : 0 min

Adjust Next

1

Select

Time

Set Clock : 1 2 : 00 AMWake-Up Time : :Off Time : :Sleep Timer : 0 min

Adjust Next

3

Select

Time


Adjust Next

2

Select

Time


Adjust Next

1

Select

Time

Set Clock : 12 : 00 AMWake-Up Time : 06 : 30 AMOff Time : :Sleep Timer : 0 min

Adjust Next

3

Select

Time


Adjust Next

2

16 Chapter 4: Using Timer Functions

Setting the Off Time

If you enter a time in the “Off Time” setting, your TV will automatically turn off at that time.Follow these instructions to set the “Off Time”.


2 Use the WCHV buttons to select “Off time” item.

3 If you hold down either CVOL or VOL B button, the corresponding numbers will change morequickly.


Canceling the Wake-up Time or Off Time

If you would like to cancel the Wake-up Time or the Off Time, Press the CVOLB buttons until thetime settings return to “- -:- -”.

The Wake-up Time and Off Time will not function correctly unless the clock has been set.

Select

Time


Adjust Next

1

Select

Time

Set Clock : 12 : 00 AMWake-Up Time : 06 : 30 AMOff Time : 11 : 30 PMSleep Timer : 0 min

Adjust Next

3

Select

Time


Adjust Next

2

17Chapter 4: Using Timer Functions

Setting the Sleep Timer

The sleep timer allows you to set an amount of time from 15 minutes to 120 minutes.TV will count down the amount of time you set, then turn itself off.To set the sleep timer:


2 Use the WCHV buttons to select “Sleep Timer” item.

3 Use the CVOLB buttons to set the sleep time. Each time you press VOL, you step between theavailable sleep times : 15min, 30min, 45min, 60min, 90min, or 120min.


5 You can also set the “Sleep Timer” during normal TV viewing, simply by pressing the SLEEPbutton on the remote control. This button steps through the available sleep times(see step 3), oneby one.

To cancel the Sleep timer, turn the TV off, or set the sleep time to “0” using one of the methodsdescribed above.

Select

Time


Adjust Next

1

Select

Time


Adjust Next

3

Select

Time


Adjust Next

2

18 Chapter 5 : Additional Features

Using the Special FeaturesThis section contains descriptions of the more advanced features of your TV.

Changing the Language of the On-screen Menus

You can choose to display the on-screen menus in English, Spanish, French.To change the on-screen language:

1 With the TV on, press the MENU button twice, then “Set-Up” menu will appear.

2 The “Language” item will be selected. Press the CVOLB buttons to select the language youwant to use: English, Español, Français.

3 To return to normal TV viewing, press DISPLAY button or MENU button.

Captioning

Many TV shows contains “Closed Caption”. These captions are hidden words that can be displayedon your TV screen. There are two types of these words : “captions” usually follow the actionon-screen, providing a written version of the dialogue, narration, and sound effects ; “text” is notusually related to the action on-screen, often providing information such as news or weather. A TVprogram might be providing more than one set of captions or one set of text.

To set your TV to display captions or text.

1 With the TV turned on, press the MENU button until “Special” menu will be displayed.

2 The “Closed Caption” item be selected. To turn captioning on, use the CVOLB buttons to selectCaptions (C1 or C2) or Text (T1 or T2).At the time these instructions were written, only C1 is normally available, but feel free to try theother selections.

3 Wait 20 seconds, or press DISPLAY button or MENU button to return to normal TV viewing.Your setting will remain intact until you change it.

Select

Special

Closed Caption : CC on Mute : Power Restore : Parental Control Ch Labels :

OffOffOff

Adjust Next

1

To Press

Select

Special

Closed Caption : CC on Mute : Power Restore : Parental ControlCh Labels :

Adjust Next

2-2

T1OffOff

To Press

Select

Special

Closed Caption : CC on Mute : Power Restore :Parental Control Ch Labels : To Press

Adjust Next

2-1

C1OffOff

C H A P T E R 5

19Chapter 5 : Additional Features

CC on Mute

With this function, user can select the caption display instead of sound mute when using the Mutebutton by necessity. This function is only effective when the Closed Caption is set to Off.


2 Use the WCHV buttons to select “CC on Mute” item.

3 Use the CVOLB buttons to select “C1” or “C2”.

Power Restore

User can select the On/Off status when the power cord put into the wall outlet. If user have a cablebox with AC outlet, then user can connect the TV power cord to the AC outlet and control the TVwithout TV remote control. This function is rarely used for home use, so special care is neededwhile using.


2 Use the WCHV buttons select “Power Restore” item.

3 Use the CVOLB buttons to select “On” or “Off”.

Select

Special

Closed Caption : CC on Mute : Power Restore :Parental ControlCh Labels :

Adjust Next

1

OffOffOff

To Press

Select

Special

Closed Caption : CC on Mute : Power Restore : Parental ControlCh Labels :

Adjust Next

3-2

OffC2Off

To Press

Select

Special


Adjust Next

2

OffOffOff

To Press

Select

Special

Closed Caption : CC on Mute : Power Restore :Parental ControlCh Label :

Adjust Next

3-1

OffC1Off

To Press

Select

Special


Adjust Next

1

C1C1Off

To Press

Select

Special

Closed Caption : OC on Mute : Power Restore : Parental ControlCh Labels :

Adjust Next

3

C1C1On

To Press

Select

Special

Closed Caption : OC on Mute : Power Restore :Parental ControlCh Labels :

Adjust Next

2

C1C1Off

To Press


Parental Control Settings

This item helps parents to set the standard for the programs which their children is going to watch.

1 With the TV on, press the MENU button until “Special” menu will appear.

2 Use the WCHV buttons to select “Parental Control” item.

3 Use the CVOLB buttons to enter into “Parental Control” settings.

4 Use the number buttons(0-9) to enter your password, then “Parental Control” menu will be dis-played. If this is the first time you are using your “Parental Control” menu, after entering yourpassword you have to remember it.

5 The Parental Lock feature will be selected. Use the CVOLB buttons to toggle “On” or “Off”.

6 Use the WCHV buttons to select the Parental Control settings you wish to adjust.Descriptions of the Parental Control settings are on the next page.

7 Use the WCHV buttons to adjust the Parental Control settings.

8 Use the MENU button to return to the previous menu.

* On the blocked screen, if you want to watch the blocked content, press the DISPLAY buttontwice. Then the following sentence is displayed on the screen, and if you enter the passwordthe block is cancelled. If you turn the TV off and on, the content with ratings will be blockedagain.

Closed Caption : OffCC on Mute : OffPower Restore : OffParental ControlCh Labels: To Press

Select

Special

Adjust Next

1-1

Select

Parental Lock : OnTV GuidelinesMovie RatingsNo Rating : UnblockExt. Source: Unblock Change Password

Adjust Prev.

1-2Parental Control

Enter a new Password

- - - -

0-9 : Adjust Prev.

Repeat the Password

# # # #

0-9 : Adjust Prev.

TV-PGLS

11

This rating is blocked

1

Enter the Password

If you want block offuntil TV is off

- - - -

2TV-PGLS

11

3

(Unblocked screen)


Description of Parental Control Settings

1 The TV Guidelines set the standard for TV programs excluding sports and news.

Use the WCHV buttons to select, CVOLB buttons to adjust. You can set individual

settings with CVOLB buttons.

2 The Movie Ratings set the standard for movie, video, and other media excluding TV pro-grams. Use the WCHV buttons to select, CVOLB buttons to adjust.

3 The No Rating item toggle between “Unblock” and “Block”.

This item determines whether to block or not the programs which are not rated by

“Movie Ratings ” and “TV Guidelines”.

Use VOL buttons to change the settings.

4 The Set Password item let you change the password for entering Parental Control item.You had better change the initial password “0000”. Use CVOLB buttons to enter the pass-word input display, and use the number buttons(0-9) to enter new password. After youentered the new password, confirmation display will appear. Type again the password.

Parental ControlParental Lock : OnTV GuidelinesMovie RatingsNo Rating : UnblockExt. Source: Unblock Change Password

1-1

Select Adjust Prev.

XNC-17RPG-13PGGNR

2-2

Select Adjust Prev.

[ : Block]


2-1

Select Adjust Prev.

Rating All FV D L S V

TV-MATV-14TV-PGTV-GTV-Y7TV-Y

1-2

Select Adjust Prev.

[ : Block]


3-1

Select Adjust Prev.


3-2

Select Adjust Prev.


No Ratings means

1 When V-chip data is error.

2 When any ratings are not deleted.

3 Received a rating of “None” like news, sports, and emergency broadcast signals.

Mini Glossary

MOVIE RATING SYSTEM

TV PARENTAL GUIDELINE RATING SYSTEM

X Hard Core Films Not for children under age 17 under any circumstance.Strong sexual content.

NC-17 Restricted viewing Same as X rating.

R Restricted viewing Not for children under age 17. Strong element of sex and/or violence.

PG-13 Parental Guidance Program is inappropriate for preteens, with a greater degree ofSuggested offensive material than a PG rated program.

PG Parental Guidance Content is such that parents may not want their children to view the Suggested program.

G General Audience Content not offensive to most viewers.

NR Not Rated A motion picture that could not receive a rating for a variety of possible reasons.

TV-MA Mature Audience Only Adults only, may contain Strong Dialog, Bad Language and Sex.

TV-14 Parents Strongly Unsuitable for children under 14. may contain Strong Dialog, BadCautioned Language, Sex and Violence Scenes.

TV-PG Parental Guidance Unsuitable for younger children, may contain Suggestive Dialog.Suggested Bad Language, Sex and Violence Scenes.

TV-G General Audience Considered suitable for all audience; children may watch unattended.

TV-Y Children Consider suitable for all children under 7 years old.

TV-Y7 Children 7 and over Consider suitable for children over 7. may contain Fantasy Violence Scenes.


Ch Labels

This feature allows you to enter a 4 letter channel identifier of your choice that will appear over thechannel number display.

The labeling can be anything you want.


2 Use the WCHV buttons to select “Ch Labels” item.

3 Press VOLB on the remote control or on the TV to select the 1st character space.

4 Press WCHV repeatedly until the 1st character (“A” in this example) appear in the 1st characterspace.

5 Press VOLB once to enter the 1st character and to advance to the next character space.

6 Repeat steps 4~5 to enter the 2nd 3rd and 4th characters (“B”, “C”, “D” in the this example), andwhen you press VOLB for the last time, the channel label has been stored in the memory.


Select

Special

Adjust Next

1


Select

Special

Adjust Next

2

Closed Caption : OffCC on Mute : OffPower Restore : OffParental ControlCh Labels: ----

Select

Special

Adjust Next

3

Closed Caption : OffCC on Mute : OffPower Restore : OffParental ControlCh Labels: A---

Select

Special

Adjust Next

4

Closed Caption : OffCC on Mute : OffPower Restore : OffParental ControlCh Labels: ABCD

Select

Special

Adjust Next

5-3


Select

Special

Adjust Next

6

Closed Caption : OffCC on Mute : OffPower Restore : OffParental ControlCh Labels: AB--

Select

Special

Adjust Next

5-1

Closed Caption : OffCC on Mute : OffPower Restore : OffParental ControlCh Labels: ABC-

Select

Special

Adjust Next

5-2


NOTEEach time you press the WCHV buttons, the displayed character will change in the followingorder.

CHV A B C D ... Z 0 1 ... 9 -

WCH 9 8 ... 0 Z Y ... B A -

Clearing Channel Labels1. Select the channel which has the label you want to clear.

2. 3.4. Follow step 1~3 on the “Ch Labels” to call up the Ch Labels mode display.

5. Enter “-” in first character spaces.

25Chapter 6 : Adjusting the Sound

C H A P T E R 6

Adjusting the Sound

Selecting stereo/SAP

The MTS(Multi-channel TV Sound) provides for an extra sound channel. So MTS feature allowsyou to improve your TV viewing with high fidelity stereo sound. SAP(Second Audio Program) usedto transmit a second language of other audio information. If your TV receives a stereo sound(orSAP) broadcast, when the TV is turned on, select other channel or press the DISPLAY button on theremote control the word “Stereo”(or “SAP”) is displayed on the screen.

Listening to stereo sound

1 With the TV turned on, press the MENU button until “Audio” menu will be displayed.

2 Use the WCHV buttons select “Audio Mode” item.

3 Press the CVOLB buttons repeatedly until: “Stereo” is displayed.

4 To return to normal TV viewing, press DISPLAY button or MENU button, or wait 20 seconds.

5 Your setting will remain intact until you change it. Your TV will then automatically reproduceeither stereo or monaural sound, whichever is broadcast.

Listening to second Language

1 Follow steps 1~2 in “Listening to stereo sound” above.

2 Press the CVOLB buttons repeatedly until: “SAP” is displayed.


4 If a SAP broadcast is received, you will hear only the second language from the speaker.

Select

Audio

Audio Mode: MonoBassTrebleBalanceSurround Effect: Off

Adjust Exit

1~2

Select

Audio

Audio Mode: StereoBassTrebleBalanceSurround Effect: Off

Adjust Exit

3

Select

Audio

Audio Mode: SAPBassTrebleBalanceSurround Effect: Off

Adjust Exit

26 Chapter 6 : Adjusting the Sound

Using Direct button on the remote control

1 You can also change the Audio Mode setting with the remote control. Press the MTS button onthe remote control to select Audio Mode.

2 Use this button to select the Stereo, Mono or SAP.

Adjusting the Bass

1 With the TV turned on, press the MENU button until “Audio” menu will be displayed.

2 Use the WCHV buttons select “Bass” item.

3 Press the CVOL button to decrease the bass volume.

4 Press the VOLB button to increase the bass volume.


6 Your setting will remain intact until you change it. Your TV will then automatically reproduce either stereo or monaural sound, whichever is broadcast.

Note

If a broadcast signal is weak, it may cause noise and hum in stereo sound. Please select the Monomode, the noise and hum should be reduced.

Present Broadcast Your Selection Speaker Out

MONO Stereo Mono

MONO SAP Mono

STEREO SAP Mono

STEREO and SAP Stereo Stereo

STEREO and SAP SAP SAP

Select

Audio


Adjust Exit

1

Select

Audio


Adjust Exit

2

Select

Audio


Adjust Exit

3

Select

Audio


Adjust Exit

4

27Chapter 6 : Adjusting the Sound

Adjusting the Treble1 With the TV turned on, press the MENU button until “Audio” menu will be displayed.

2 Use the WCHV buttons to select “Treble” item.

3 Press the CVOL button to decrease the treble volume.

4 Press the VOLB button to increase the treble volume.



Adjusting the Balance1 With the TV turned on, press the MENU button until “Audio” menu will be displayed.

2 Use the WCHV buttons to select “Balance” item.

3 Press the CVOL button to decrease the left speaker volume.

4 Press the VOLB button to decrease the right speaker volume.



Select

Audio


Adjust Exit

1

Select

Audio


Adjust Exit

2

Select

Audio


Adjust Exit

3

Select

Audio


Adjust Exit

4

Select

Audio


Adjust Exit

1

Select

Audio


Adjust Exit

2

Select

Audio


Adjust Exit

3

Select

Audio


Adjust Exit

4

28

Selecting the Surround Effect Mode1 With the TV turned on, press the MENU button until “Audio” menu will be displayed.

2 Use the WCHV buttons to select “Surround Effect” item.

3 Press the CVOLB button to select the surround effect mode from S1 to S3 for the favouritesound.


5 Your setting will remain intact until you change it. Your TV will then automatically reproduceeither stereo or monaural sound, whichever is broadcast.

Select

Audio


Adjust Exit

1

Select

Audio

Audio Mode: MonoBassTrebleBalanceSurround Effect: S1

Adjust Exit

2

Select

Audio


Adjust Exit

3

Select

Audio


Adjust Exit

4

Chapter 6 : Adjusting the Sound

29Chapter 7 : Troubleshooting

TroubleshootingYour Daewoo television is designed to give you trouble-free performance for many years. If youhave a problem with your TV, try the solutions listed below.

If the suggestions listed below do not solve your problem, contact your Daewoo dealer or an autho-rized Daewoo service center.

There is no picture or sound, or the TV doesn't turn on.• Make sure the TV is plugged in.• Make sure the MUTE is not set.• Make sure the power is on.• If there is neither picture or sound, unplug the TV for 30 seconds, then plug it in and try again.

There is no picture or sound on some UHF channels.• Try another station. If the other stations are OK, it may be a station problem.• Check that the antenna is connected, is in good working order, has no broken wires, and is adjust-

ed correctly.• See if anything is interfering with the antenna signal.• Make sure the AIR/CABLE setting is correct.

The sound is OK, but the picture is poor.• Try another station. If the other stations are OK, it may be a station problem.• Check that the antenna is connected and is in good working order, has no broken wires, and is

adjusted correctly.

The picture is OK, but the sound is poor.• Try another station. If the other stations are OK, it may be a station problem.• Check that the antenna is connected, is in good working order, has no broken wires, and adjusted

correctly.

There is poor reception on some channels.• Try another station. If the other stations are OK, it may be a station problem.• Check that the antenna is connected, is in good working order, has no broken wires, and is adjust-

ed correctly.

You cannot tune to a cable channel.• Make sure the AIR/CABLE setting is correct.• The channel may not be programmed into memory.

The picture rolls, slants, shows lines, is grainy, has poor color, or hasghosts.• Try another station. If the other station are OK, it may be a station problem.• Check that the antenna is connected, is in good working order, has no broken wires, and is adjust-

ed correctly.• See of anything is interfering with the antenna signal.

The remote control does not work.• Make sure the TV is plugged in.• Make sure there are fresh batteries in the remote control.• Make sure there is nothing blocking the remote control signal.

C H A P T E R 7

Documents

Daewoo Cn230f Chassis Dtq20u4sc Tv Sm