D340 MIXER TECHNICAL MANUAL (ML-134254) (208/60/3)The D340 Mixer is a medium-duty mixer which develops 1 1/ 2 horsepower and features a timer, thermal overload protection and a #12

D340 MIXER

TECHNICAL MANUAL (ML-134254)

(208/60/3)

SPECIFICATION SHEET INSTALLATION INSTRUCTIONS OPERATION INSTRUCTIONS CLEANING INSTRUCTIONS MAINTENANCE INSTRUCTIONS TROUBLE SHOOTING INSTRUCTIONS WIRING DIAGRAMS CATALOG OF REPLACEMENT PARTS SMARTPARTS™ USER GUIDE

RECOMMENDED SPARE PARTS LIST

Need other Hobart Services?

Warranty Registration

Delivery and Installation

Preventive Maintenance

Hobart Service Contracts

Extended Warranty Contracts

Parts and Accessories

Specialty Programs

Water Treatment Programs

Air Filtration System

D340 Mixer Technical Manual Page 2 of 67

http://www.hobartservice.com/warranty/registrationhttp://www.hobartservice.com/installations/http://www.hobartservice.com/pmhttp://www.hobartservice.com/contractshttp://www.hobartservice.com/warranty/extendedhttp://www.hobartservice.com/partshttp://www.hobartservice.com/service/#specialty#specialtyhttp://www.hobartservice.com/watertreatment/http://www.hobartservice.com/AirFiltration/http://www.hobartservice.com/service/locations/http://www.hobartservice.com/

Item # ________________________________

Quantity _______________________________C.S.I. Section 11400

D340MIXER701 S Ridge Avenue, Troy, OH 45374

1-888-4HOBART • www.hobartcorp.com

F-8426 – D340 Mixer Page 1 of 4

D340 M

IXE

R

STANDARD FEATURES

■ 11⁄2 H.P. Hobart Designed Fixed Speed Motor

■ Gear-Driven Transmission

■ 15 Minute Timer

■ Three Fixed Speeds

■ Open Base

■ Large, Easy-To-Reach Controls

■ #12 Taper Attachment Hub

■ Stainless Steel Bowl Guard

■ Manual Bowl Lift

■ 40-Quart Stainless Steel Bowl, “B” Flat Beater,“D” Wire Whip, “ED” Dough Hook

ACCESSORIES

❑ Stainless Steel Bowl

❑ “B” Flat Beater

❑ “C” Wing Whip

❑ “D” Wire Whip

❑ “ED” Dough Hook

❑ “P” Pastry Knife

❑ “I” Heavy Duty Wire Whip

❑ Bowl Truck

❑ Bowl Scraper

❑ 20 Quart Accessories

❑ Ingredient Chute

❑ 9" Vegetable Slicer

❑ Meat Chopper Attachment

MODELS❑ D340 – 40-Quart All Purpose Mixer❑ D340C – 40-Quart All Purpose Mixer with

Maximum Security CorrectionalPackage (208/60/1 and 208/60/3 only)

Specifications, Details and Dimensions on Inside and Back.

R


D340MIXER

Page 2 of 4 F-8426 – D340 Mixer

701 S Ridge Avenue, Troy, OH 453741-888-4HOBART • www.hobartcorp.com

SOLUTIONS/BENEFITS

11⁄2 H.P. Hobart Designed MotorDurability■ Heavy-duty to meet the most demanding

operations

15-Minute Electric TimerConvenience, Ease of Use, Consistency■ Supports recipe mixing times■ Simplifies operation■ Provides accurate results and eliminates

overmixing

Three Fixed SpeedsFlexibility, Reliability, Consistency■ For incorporating, blending, mixing ingredients■ Supports consistent results and thorough

mixing

Bowl GuardProtection■ Safety interlock prevents operation when front

portion of guard is out of position

Gear-Driven TransmissionDurability, Reliability■ Ensures consistent performance and minimum

downtime with positive drive under heady loads

Hobart AttachmentsDurability, Flexibility■ Hobart manufactured accessories are designed

for long-term usage under heavy-dutyconditions

■ Large array of attachments provides multipleuses for recipe and product processing

D340 MIXER CAPACITY CHART

Recommended Maximum Capacities - dough capacities basedon 70°F water and 12% flour moisture

AGITATORSPRODUCT SUITABLE FOR D340

OPERATIONCAPACITY OF BOWL (QTS. LIQUID) 30

Egg Whites D 13⁄4 qts.

Mashed Potatoes B & C 30 lbs.

Mayonnaise (Qts. of Oil) B or C or D 13 qts.

Meringue (Qts. of Water) D 11⁄2 qts.

Waffle or Hot Cake Batter B 16 qts.

Whipped Cream D or C 9 qts.

Cake, Angel Food(8-10 oz. cake) C or I 30

Cake, Box or Slab B or C 40 lbs.

Cake, Cup B or C 45 dz.

Cake, Layer B or C 45 lbs.

Cake, Pound B 40 lbs.

Cake, Short (Sponge) C or I 25 lbs.

Cake, Sponge C or I 40 lbs.

Cookies, Sugar B 30 lbs.

Dough, Bread or Roll (Lt.-Med.)60% AR § ED 45 lbs.■■

Dough, Heavy Bread 55% AR § ED 35 lbs.■■

Dough Pie B & P 35 lbs.

Dough, Thin Pizza 40% AR(max. mix time 5 min.) §† ED 25 lbs.■■

Dough, Med. Pizza 50% AR §† ED 32 lbs.■■

Dough, Thick Pizza 60% AR §† ED 45 lbs.■■

Dough, Raised Donut 65% AR ED 25 lbs.*

Dough, Whole Wheat 70% AR ED 45 lbs.■■

Eggs & Sugar for Sponge Cake B & C or I 18 lbs.

Icing, Fondant B 25 lbs.

Icing, Marshmallow C or I 41⁄2 lbs.

Shortening & Sugar, Creamed B 35 lbs.

Pasta, Basic Egg Noodle(max. mix time 5 min.) ED 15 lbs.

NOTE: %AR (% Absorption Ratio) - Water weight divided byflour weight. Capacity depends on moisture content of dough.Above capacities based on 12% flour moisture at 70°F watertemperature.■■ 1st Speed

* 2nd Speed

§ If high gluten flour is used, reduce above dough batch sizeby 10%.

† 2nd speed should never be used on 50% AR or lowerproducts.

USE OF ICE REQUIRES A REDUCTION IN BATCH SIZE.

1 gallon of water weighs 8.33 lbs.

NOTE: Attachment hub should not be used while mixing.


D340MIXER

F-8426 – D340 Mixer Page 3 of 4


SPECIFICATIONS

MOTOR:11⁄2 H.P., Hobart designed, permanently lubricatedball bearings, totally enclosed, fan-cooled.Single-phase is capacitor-start, capacitor-run type.Three-phase is squirrel cage, induction-run type.

ELECTRICAL:120/60/1, 208/60/1, 240/60/1, 208/60/3, 240/60/3,and 480/60/3 – U L Listed. Also available in 380/50/3and 415/50/3 – not submitted for U L Listing.

CONTROLS:Magnetic contactor with bimetallic thermal overloadprotection internally mounted. “Start-Stop” push-buttons protected by rubber caps. A 15-minuteelectric timer is standard.

TRANSMISSION:Gear-driven. Gears are constant mesh heat-treatedalloy steel. Anti-friction ball or roller bearings.A hardened steel worm and alloy bronze worm geartransmit power from motor to transmission. Greaselubricated.

SPEEDS:Three positive speeds - Low, Intermediate, and High.

Agitator Attachment(RPM) (RPM)

Low 96 56

Intermediate 179 104

High 319 185

BOWL GUARD:Heavy-duty stainless steel wire front and solidstainless steel rear portion. Front portion of guardrotates easily to add ingredients and install orremove agitator. It detaches in seconds for cleaningin dishwasher or sink. Rear portion of guard can bequickly cleaned in position. Guard must be in closedposition before mixer will operate. The bowl supportlock prevents the bowl from being lowered whilemixer is running. Bowl support interlock providesfurther protection.

BOWL LIFT:Hand crank operated, self-locking in any position.

FINISH:Metallic Gray Hybrid Powder Coat finish. TopCharcoal Gray, Polyurethane Enamel.

STANDARD EQUIPMENT:Consists of the mixer unit with one (1) 40-quartstainless steel bowl, one (1) “B” flat beater, one (1)“D” wire whip, one (1) stainless steel “ED” doughhook and stainless steel bowl guard.

ATTACHMENT HUB:Equipped with front-mounted Hobart standard #12taper attachment hub, and any #12 size attachmentsmay be used.

NOTE: Use of attachment hub during mixing opera-tion may result in a negative impact on performanceand longevity of mixer.

ATTACHMENTS AND ACCESSORIES:The following are available at extra cost:

Hobart BowlScraper

Hobart IngredientChute

Bowl TruckBowl Scraper20 Quart AccessoriesIngredient Chute9" Vegetable SlicerMeat Chopper Attachment

Stainless Steel Bowl“B” Flat Beater“C” Wing Whip“D” Wire Whip“ED” Dough Hook“P” Pastry Knife“I” Heavy Duty Wire

Whip

LISTED BY: Underwriters Laboratories, Inc. and NSF International.Certified by the Baking Industry Sanitation Standard Committee.


D340MIXER

Printed On Recycled Paper


Page 4 of 4 F-8426 – D340 Mixer

As continued product improvement is a policy of Hobart, specifications are subject to change without notice.

F-8426 (REV. 2/04) LITHO IN U.S.A. (H-01)

SPECIFICATIONS

DETAILS AND DIMENSIONS

ELECTRICAL SPECIFICATIONS: 120/60/1,208/60/1, 240/60/1, 208/60/3 and 480/60/3 –U L Listed. Also available in 380/50/3 and 415/50/3– not submitted for U L Listing.

WEIGHT: 575 lbs. net; 600 lbs. domestic shipping.

WARRANTY: Unit has full one-year warranty onparts, labor and mileage against manufacturer’sdefects. Service contracts are available.


701 S. RIDGE AVENUE

TROY, OHIO 45374-0001

937 332-3000

www.hobartcorp.com

NS

TR

UC

TI O

NS

I

F34926 (June 2005)

D340 MIXER

D340 MIXERS

D340 ML - 1 3 4 2 5 4D340 W/Electronic Timer ML - 1 3 4 2 5 6


– 2 –© HOBART 2005

MODEL D340 MIXER


– 3 –

123456789012345678901234567890121234567890123456789012345678901234567890121234567890123456789012345678901234567890121234567890123456789012345678901234567890121234567890123456789012345678901234567890121234567890123456789012345678901234567890121234567890123456789012345678901234567890121234567890123456789012345678901234567890121234567890123456789012345678901234567890121234567890123456789012345678901234567890121234567890123456789012345678901234567890121234567890123456789012345678901234567890121234567890123456789012345678901234567890121234567890123456789012345678901234567890121234567890123456789012345678901234567890121234567890123456789012345678901234567890121234567890123456789012345678901234567890121234567890123456789012345678901234567890121234567890123456789012345678901234567890121234567890123456789012345678901234567890121234567890123456789012345678901234567890121234567890123456789012345678901234567890121234567890123456789012345678901234567890121234567890123456789012345678901234567890121234567890123456789012345678901234567890121234567890123456789012345678901234567890121234567890123456789012345678901234567890121234567890123456789012345678901234567890121234567890123456789012345678901234567890121234567890123456789012345678901234567890121234567890123456789012345678901234567890121234567890123456789012345678901234567890121234567890123456789012345678901234567890121234567890123456789012345678901234567890121234567890123456789012345678901234567890121234567890

Installation, Operation and Care ofMODEL D340 MIXERSSAVE THESE INSTRUCTIONS

GENERAL

The D340 Mixer is a medium-duty mixer which develops 11/2 horsepower and features a timer, thermaloverload protection and a #12 Attachment Hub as standard equipment. A variety of agitators areavailable for use on either the standard 40-quart bowl or the optional 30-quart bowl. A special 20-quartbowl and agitators are available options.

Programmable Timer Controller is optional on D340 models.

A variety of attachments and accessories are available for all mixers. These are described in aseparate Use and Applications Handbook, which is furnished with each mixer.

INSTALLATION

UNPACKING

Immediately after unpacking the mixer, check for possible shipping damage. If this machine is foundto be damaged, save the packaging material and contact the carrier within 15 days of delivery.

Prior to installation, test the electrical service to assure that it agrees with the specifications on themachine data plate.

LOCATION

Place the mixer in its operating location. There should be adequate space around the mixer for the userto operate the controls and to install and remove bowls. The area above the mixer should allow the topcover to be removed for routine maintenance and servicing.

Holes are provided in the base for permanent bolting to the floor, although this is not necessary in normalinstallations. Four plastic plugs are supplied with the mixer to plug these holes if they are not used.


– 4 –

ELECTRICAL CONNECTION

WARNING: ELECTRICAL AND GROUNDING CONNECTION MUST COMPLY WITH THEAPPLICABLE PORTION OF THE NATIONAL ELECTRICAL CODE AND/OR OTHER LOCALELECTRICAL CODES.

WARNING: DISCONNECT THE ELECTRICAL POWER TO THE MACHINE AND FOLLOWLOCKOUT / TAGOUT PROCEDURES.

A hole for 1/2 trade size conduit is located at the top of thepedestal (Fig. 1). Make electrical connections per thewiring diagram located on the inside of the top cover.

Check Rotation (Three-Phase Machines Only)

Three-phase machines must be connected so theplanetary rotates in the direction of the arrow on the DripCup. To check rotation:

1. Set the Gear Shift Lever on 1.

2. Apply power to the mixer, set theElectromechanical Timer on hold; or, if equippedwith a Programmable Timer Controller, set it on[-- : --]. With the Bowl Support all the way up,momentarily run the machine by pushing the START and then STOP buttons.

3. If rotation is incorrect, disconnect electrical power supply and interchange any two of theincoming power supply leads.

sledoM hP/zH/stloVdetaRspmA

tiucriCeziS

)spmA(

esuFeziS

)spmA(

C06reppoC

erIWeziS

tiucriCeziS

)spmA(

rekaerBtiucriC)spmA(

C06eriWreppoC

eziS

043D 1/06/021 4.21 02 02 21 02 02 21

043D 1/06/802 0.8 51 01 41 02 02 21

043D 1/06/042 2.6 51 01 41 51 51 41

043D 3/06/802 8.3 51 6 41 51 6 41

043D 3/06/042 4.3 51 6 41 51 6 41

043D 3/06/084 7.1 51 3 41 51 6 41

Fig. 1


– 5 –

ELECTROMECHANICAL TIMER CONTROLS (When Equipped, Fig. 3)

The START button is used to start the mixer.

The STOP button is used to stop the mixer.

The TIMER is used in conjunction with the STARTbutton for timed mixing operations and will stop themixer when a preset time has elapsed.

Non-timed Mixing

Set the timer on hold and use the START and STOP buttons to operate the mixer.

Start Button

Stop Button

Timer

Gear Shift Lever

PL-40142-1

PL-40174-1

Controls

Bowl Lift Handle

Bowl Handle

Bowl Clamp

Bowl Support

Attachment Hub

Bowl Guard(Wire Cage)

Agitator

Bowl

Drip Cup

Apron

Alignment Pin

Fig. 2

OPERATION

WARNING: MOVING BEATER IN BOWL. KEEP HANDS, CLOTHING AND UTENSILS OUTWHILE IN OPERATION. DO NOT USE WITHOUT INTERLOCKED GUARD.

Every D340 mixer is equipped with either an Electromechanical Timer Control (described at the bottomof this page) or a Programmable Timer Controller (described on page 6). Also, become familiar with theother operating parts (Fig. 2) and their functions, which are referenced throughout the Operationsection.

The Bowl Guard must be in the Front-Center Position or the mixer will not operate (see page 10).

If the Bowl Support is not all the way up, the mixer will not operate unless the START button is held in.

Fig. 3


– 6 –

PROGRAMMABLE TIMER CONTROLLER (When Equipped)

At idle, the TIME DISPLAY [--:--] shows that no time has been set (Fig. 4).

Fig. 4

Timer Keys Programming Function (if the mixer is not mixing)

P1 Contains up to four preset times. Displays each preset time sequentially.

P2 Contains up to four additional preset times. Displays each preset time sequentially.TIME Knob Turn the TIME knob until the desired time is shown on the TIME DISPLAY.SAVE Replaces the preset time with the indicated time.

CLEAR Returns to idle from a programming function.

Continuous Mixing

START and STOP buttons control mixing operation.

Beginning from the idle display [-- :--], press START to begin mixing. The M/C Indicator will be lit,and the total mixing time will be indicated (minutes and seconds).

Press STOP when mixing is done. The M/C Indicator light goes off and the idle display [-- :--]returns.

Set Mixing Time (Using TIME Knob)

Beginning from the idle display [-- :--], turn the TIME knob to set the mixing time. The M/C Indicatorwill be lit.


Press START to begin mixing. The timer will count down from the set time to [00 : 00].

If STOP is pressed, both mixing and timer countdown will be interrupted. After pressing STOP,press START to resume both mixing and timer countdown; or, press CLEAR to return to the idledisplay.

When the timer reaches [00 : 00], the mixer will stop and the M/C Indicator will be lit. Atone will sound for 2 seconds and the idle display [-- :--] will return.

3

2

1

STOP

TIMESTOP MIXER

BEFORECHANGING SPEEDS

START

TIMER CONTROLLER

P1

SAVE

CLEAR

P2

M/C

1 2 3 4

GEAR SHIFT LEVER

P1 KEY

P2 KEY

M/C INDICATOR

START BUTTON

STOP BUTTON

TIME DISPLAY

KNOB

SAVE KEY

CLEAR KEY

PL-56563


– 7 –

Set Mixing Time (Preset Keys P1 or P2)

Each preset key has four time settings. The indicator lights above the number 1, 2, 3 or 4 and the P1or P2 indicator light identify which preset time is being displayed. The chart below shows the defaultsettings. The next page shows how to revise these preset times. The TIME Knob can be used to adjustthe mixing time if it is turned prior to pressing START.

Beginning from the idle display [-- :--], press P1 or P2 to display the #1 preset mixingtime. (Pressing P1 or P2 again will display the next preset time, etc.)

The TIME knob can adjust the time.


Press START to begin mixing. The timer will count down from the set time to [00 :00].

If STOP is pressed, both mixing and timer countdown will be interrupted. Afterpressing STOP, press START to resume both mixing and timer countdown; or pressCLEAR to return to the idle display.

When the mixer is stopped, you can perform the following tasks: add ingredients,change speed, reset the timer, continue mixing or unload.

When the timer reaches [00 : 00], the mixer stops. A tone sounds for 2 seconds andthe next preset mixing time displays. When the last preset time reaches [00 : 00], theP1 or P2 indicator light is lit and the idle display [-- : --] returns. Repeat from to complete four preset times.

The timer reverts to the factory-programmed preset times after any power interruption.

FACTORY-PROGRAMMED PRESET TIMES

-P1

-P2

01:00- - - -1 2 3 4

Indicators above P1and 1 indicate thef i rst preset t imecontained in P1.

yeKteserProtacidnI

1 2 3 4

1P 00:10 00:20 00:01 00:00

2P 00:20 00:10 00:50 00:30


– 8 –

Revise Preset Mixing Times (Preset Keys P1 or P2)

Each preset key has four preset time settings. The indicator lights above the number 1, 2, 3 or 4 andthe P1 or P2 indicator light identify which preset time is being displayed.

Beginning from the idle display [-- :--], press P1 or P2 to display the #1 presetmixing time. (Pressing P1 or P2 again will display the next preset time, etc.)

Turn the TIME knob to change the time for the indicated preset.

Press SAVE to retain the revised time and move to the next preset time.

Repeat from for each preset time (1, 2, 3 and 4 contained in P1 or P2).

Press CLEAR to retain the saved times and return to the idle display [-- : --].

The timer reverts to the factory-programmed preset times after any power interruption.

FACTORY PROGRAMMED PRESET TIMES

-P1

-P2

01:00- - - -1 2 3 4

Indicators above P1and 1 indicate thef i rst preset t imecontained in P1.

yeKteserProtacidnI

1 2 3 4

1P 00:10 00:20 00:01 00:00

2P 00:20 00:10 00:50 00:30

CHANGING SPEEDS

The Gear Shift Lever is used to change speeds. Always stop the mixer before changing speeds.

1. Push the STOP button.

2. Move the Gear Shift Lever to the desired speed.

3. Push the START button to restart the mixer.

NOTE: If you do not stop the mixer to change speeds, it will automatically shut itself off and you willhave to restart it after changing speeds.

Mixer Speeds

Speed 1 (Low) — This speed is for heavy mixtures such as bread dough, heavy batters and potatoes.

Speed 2 (Medium) — This speed is for light dough (which must rise quickly), cake batters, mashingpotatoes and some whipping operations.

Speed 3 (High) — This is a fast speed for light work, such as whipping cream, beating eggs and mixingthin batters.


– 9 –

BOWL LIFT

D340 models are equipped with a Bowl Lift Handle (see Fig. 2). Mixers equipped with Bowl Lift Handlemust be turned off to lower the bowl.

• Raise the bowl by rotating the lift handle downward.

• Lower the bowl by rotating the lift handle upward.

MIXING

This section explains operation of the mixer and how to install bowls, agitators and attachments. Aseparate Use and Applications Handbook, provided with the mixer, contains information on mixingprocedures and outlines specific uses for agitators, attachments and accessories.

Bowl

New mixer bowls and agitators (beaters, whips and dough arms) should be thoroughly washed with hotwater and a mild soap solution, rinsed with either a mild soda or vinegar solution, and thoroughly rinsedwith clear water before being used. This cleaning procedure should also be followed for bowls andagitators before whipping egg whites or whole eggs.

The bowl must be installed before the agitator is installed.

To install the bowl, fully lower the Bowl Support (Fig. 2). Position the bowl so the alignment bracket onthe back of the bowl is in the bowl retainer on the Bowl Support and the alignment pins on the front ofthe Bowl Support fit in the holes in the bowl. Lock the bowl in place by rotating the Bowl Clamps (Fig.2) over the ears of the bowl.

Agitator

To install an agitator, the bowl must be installed and fully lowered. Place the agitator in the bowl, pushthe agitator up on the agitator shaft and turn the agitator clockwise to seat the shaft pin in the slot of theagitator shank.

To Raise the Bowl While Mixing

To raise the bowl while the agitator is mixing the product (when required by recipe or when using thebowl scraper attachment):

1. Load ingredients.

2. Close the wire cage assembly.

3. Select low speed.

4. To begin mixing, press and hold the START button; then raise the bowl.


– 10 –

BOWL GUARD

The Wire Cage Assembly can be rotated out of the way to add ingredients or to access the bowl andagitator.

Rotate the Wire Cage Assembly

Push the Latch in to release the Centering Pin from the Centering Ramp. Note how the grooves on thenylon retainers allow the Wire Cage to ride around the circular Ridge on the Planetary Drip Cup. TheWire Cage can rotate 360° left or right. When the Wire Cage returns to the Front-Center Position, theCentering Pin is captured and held by the Centering Ramp, restricting rotation of the Wire Cage untilthe Latch is pressed again.

The Wire Cage must be in the Front-Center Position for the mixer to operate.

Remove Wire Cage Assembly

Lower the bowl. Rotate the Wire Cage to the rear. Remove both agitator and bowl. Return the Wire Cageto the front.

While holding the Wire Cage securely with both hands, use your thumb to push down on the BlackRelease Knob. Lower and remove the Wire Cage. Wash it in a sink, rinse with clear water and dry witha clean cloth.

The stainless steel Splash Guard can be wiped off or washed easily with a cloth or sponge and warm,soapy water. Rinse with clear water and dry with a clean cloth.

Reinstall Wire Cage Assembly

Hold the Wire Cage so its top ring is positioned around the Drip Cup with the grooves in both nylon RearRetainers straddling the Ridge on the Drip Cup. Push in the Front-Center Retainer until it stays in andits grooves straddle the Ridge on the Drip Cup. The Wire Cage is properly assembled when all threeRetainers straddle the Ridge on the Drip Cup in the three opposed locations.

Rotate the Wire Cage to the rear to install or remove the agitator and bowl or to add ingredients.

Return the Wire Cage to the Front-Center Position to operate the mixer.

PL-40071-1

Wire Cage Rotated Left Latch Ridge On Drip Cup

Rear Retainer

Splash Guard

Wire Cage Front-Center Position

Front-CenterRetainerCentering Ramp

Black Release Knob

Centering Pin

Fig. 5


– 11 –

ATTACHMENTS

To install an attachment, loosen the Attachment Hub thumb screw (Fig. 2) and remove the plug. Insertthe attachment into the Attachment Hub, making certain that the square shank of the attachment is inthe square driver of the mixer. Secure the attachment by tightening the thumb screw.

Move the Gear Shift Lever to the desired speed. With the Bowl Support all the way up and the Wire Cagein the Front-Center Position (Fig. 5), start the mixer to operate the attachment.

The meat and food chopper attachment should be operated in second or third speed. If material in thecylinder stalls the mixer, push the STOP button at once. Do not attempt to restart the mixer in a lowerspeed; remove the adjusting ring, knife, plate and worm and clear any obstruction.

Note: This attachment must not be used to chop bread crumbs.

Bowl Scraper Attachment

The Mixer bowl scraper attachment (when ordered) is provided with a separate instruction manualcovering its installation, operation, use and care.

CLEANING


A flat scraper and a brush are furnished to aid in cleaning bowls and agitators.

The mixer should be thoroughly cleaned daily. Do not use a hose to clean the mixer; wash with a clean,damp cloth. The base allows ample room for cleaning under the mixer. The apron may be removed byloosening the thumb screws. Behind this apron is an access cover which may be removed for cleaning.

The Drip Cup-Splash Guard Assembly (Fig. 5) should be removed periodically and wiped clean.

MAINTENANCE


LUBRICATION

Bowl Clamps

The bowl clamp area of the bowl support should be lubricated twice a year. Lightly coat with Lubriplate630AA (supplied).


Fig. 8

BOWL LIFT SLIDE-WAYS

The Slideways (Fig. 8) should be lubricated once each month. Remove the apron (secured by fourthumb screws) from the front of the pedestal. Lightly coat both Slideways with Lubriplate 630AA(supplied). Replace the apron and thumbscrews.

SERVICE

If service is needed on this equipment, contact your local Hobart Service Office.

PL-40172-1

Bowl Lift Slideways

FORM 34926 (June 2005) PRINTED IN U.S.A.

1. Gear Shift Lever between gears (not fullyengaged).

2. Circuit protector in open position — check fuseor disconnect switch.

3. Bowl not all the way up.

4. Wire Cage Assembly is not in the Front-CenterPosition.

5. Mixer or attachment overloaded.

TROUBLESHOOTINGSYMPTOMS POSSIBLE CAUSES

Mixer will not start.


ELECTRICAL DIAGRAMD-340 MIXER

208V - 60HZ - 3PH

DERRIVED FROM F-18763E

SYMBOL DEFINITIONS

CONTACT-NORMALLY OPEN (N.O.)CONTACT-NORMALLY CLOSED (N.C.)

GND GROUND

PB PUSH BUTTON-STOP (N.C.)PB PUSH BUTTON-START (N.O.)

FUSE

INSEPARABLE CONNECTIONSEPARABLE CONNECTIONOL OVERLOAD HEATER ELEMENT

MOTOR

TIMERTMR

FUCONTACTOR COILCON

LS

OL

L1

L3

L1 T1

L3

1PB

C NC

STOP 1 2

3C NC

OL CON

L1

L3

GND

MIXERMOTOR

LS

C NC

L2 L2L2

T3

T2

OL

OL

T1

T3

T2

T9

T1

T5T2T8

T6

T7

T3

T4

C1 C3

SPLICE

T TRANSFORMERLIMIT SWITCH

CON

CON

CON

C CONNO

2LSGUARD

3LSHEIGHT

SPLICE

TIMER

2PB START

C

NC

NO

*

RC SNUBBER ASSY

ELECTRICAL AND GROUNDING CONNECTIONS MUST COMPLY WITH THE APPLICABLE PORTIONS OF THE NATIONAL ELECTRICALCODE AND/OR OTHER LOCAL ELECTRICAL CODES.

WARNING

AI 2594


NOTEFOR SUPPLY CONNECTION USE WIRESSUITABLE FOR AT LEAST 90°C, OREQUIVALENT.

LS2PB

1PB

TMR

OL

OL

OL

CON

MOTORCONNECTIONS

T1T2T3

L3 L2 L1

COMPONENT LAYOUT AI 2595


CATALOG OF

REPLACEMENT

PARTS

MODEL D340 MIXER

(INCLUDES MOTOR PARTS)

D340 ML-134254D340C ML-134257

PRIOR MLS COVERED IN THIS CATALOG

D340 ML-134185D340C ML-134188D340 W/O Brake ML-104483D340 W/Brake ML-104484D340C ML-134118

A p r o d u c t o f H O B A R T 7 0 1 S . R I D G E A V E N U E T R O Y , O H I O 4 5 3 7 4 - 0 0 0 1

FORM 19154 Rev. C (August 2005)


- 2 -

MODEL D340 MIXER REPLACEMENT PARTS

F-19154 Rev. C (August 2005) © HOBART


- 3 -


F-19154 Rev. C (August 2005)

Table of Contents

5 TIMER CONTROL AND SWITCH UNIT7 ELECTRICAL COMPONENT PANEL – 1 PHASE9 ELECTRICAL COMPONENT PANEL – 3 PHASE11 BASE AND COLUMN

(ML-104483, ML-104484, & ML-134118)13 BASE AND COLUMN

(ML-134185, ML-134188, ML-134254, & ML-134257)15 BOWL SUPPORT

(ML-104483, ML-104484, & ML-134118)17 BOWL SUPPORT AND LIFT UNIT

(ML-134185, ML-134188, ML-134254, & ML-134257)19 TRANSMISSION CASE21 SHIFTER UNIT22 MOTOR PARTS – 1 PHASE

(*NON GE MOTORS)23 MOTOR PARTS – 1 PHASE

(GENERAL ELECTRIC)24 MOTOR PARTS – 3 PHASE

(*NON GE MOTORS)25 MOTOR PARTS – 3 PHASE

(GENERAL ELECTRIC)27 TRANSMISSION29 PLANETARY AND ATTACHMENT HUB31 BOWL GUARD UNIT

(PREVIOUS CONSTRUCTION)33 BOWL GUARD UNIT

(CURRENT CONSTRUCTION)34 BRAKE UNIT35 BOWL36 AGITATORS


- 4 -


F-19154 Rev. C (August 2005)

TIMER CONTROL AND SWITCH UNIT

PL-56934

1-23-4

12 THRU 17

6

9 35

38

36

10-1137

7-8

18-19

22

26

27

30-31-32

3339-4034

28-29

23-24-25

20-21

5


- 5 -


F-19154 Rev. C (August 2005)

TIMER CONTROL AND SWITCH UNIT

ILLUS. PART NO. NAME OF PART AMT.PL-56934

1 00-271312 Plate – Switch & Timer (ML-104483, ML-104484, ML-134185, & ML-134254) ........................ 12 00-271312 Plate – Switch & Timer (ML-134118, ML-134188, & ML-134257) ............................................. 13 SC-013-12 Mach. Screw 6-32 x 1/4 Slotted Flat Hd.

(ML-104483, ML-104484, ML-134185, & ML-134254) .............................................................. 44 SC-128-67 Mach. Screw 6-32 x 1/4 Tx. Flat Hd. (SST) (ML-134118, ML-134188, & ML-134257) .............. 45 00-087711-183-4 Switch – Push Button (N.O.) ..................................................................................................... 16 00-102467-00001 Cap – Push Button (Start) (Black) .............................................................................................. 17 00-087711-183-2 Switch – Push Button (N.C.) ...................................................................................................... 18 00-087711-183-3 Switch – Push Button (N.C.) (ML-104484) ................................................................................ 19 00-102467-00002 Cap – Push Button (Stop) (Red) ................................................................................................ 1

10 SC-121-89 Mach. Screw 6-32 x 1/4 Hex Flat Hd. (SST) (ML-134118, ML-134188, & ML-134257) ............ 211 SC-013-07 Mach. Screw 5-40 x 1/4 Slotted Flat Hd. .................................................................................... 212 00-291748 Knob – Timer .............................................................................................................................. 113 00-294650-004-1 Timer Assy. (115 V., 60 Hz.) ...................................................................................................... 114 00-294650-004-2 Timer Assy. (200/300 V., 60 Hz.) ............................................................................................... 115 00-294650-004-3 Timer Assy. (415 V., 50 Hz.) ...................................................................................................... 116 SC-013-07 Mach. Screw 5-40 x 1/4 Slotted Flat Hd. .................................................................................... 217 00-271313 Insulator – Timer ......................................................................................................................... 118 SD-024-01 Self-Tapping Screw 10-24 x 3/8 Slotted Pan Hd., Type TT ........................................................ 219 SD-037-59 Self-Tapping Screw 10-24 x 1/2 Hex Button Hd., Type F

(ML-134118, ML-134188, & ML-134257) ................................................................................... 220 00-087711-183-4 Switch – Push Button (N.O.) ..................................................................................................... 121 SC-053-38 Mach. Screw 6-32 x 1/4 Slotted Truss Hd. ................................................................................. 222 00-102467-00001 Cap – Push Button (Start) (Black) .............................................................................................. 123 00-087711-183-2 Switch – Push Button (N.C.) ...................................................................................................... 124 00-087711-183-4 Switch – Push Button (N.C.) (ML-104484) ................................................................................ 125 SC-053-38 Mach. Screw 6-32 x 1/4 Slotted Truss Hd. (SST) ...................................................................... 226 00-102467-00002 Cap – Push Button (Stop) (Red) ................................................................................................ 127 SD-024-01 Self-Tapping Screw 10-24 x 3/8 Slotted Pan Hd., Type TT ........................................................ 428 00-437775 Knob – Potentiometer ................................................................................................................. 129 00-437742 Seal – Shaft ................................................................................................................................ 130 00-438323-00001 Switch Plate & Keypad Assy. (120 VAC) .................................................................................. 131 00-439400-00001 Board Assy. (120 VAC) ............................................................................................................. 132 00-439400-00002 Board Assy. (240 VAC) ............................................................................................................. 133 NS-046-17 Stop Nut 4-40 Hex ...................................................................................................................... 234 00-438499 Buzzer Assy. .............................................................................................................................. 135 00-477670 Hasp Weldment (ML-134118, ML-134188, & ML-134257) ........................................................ 136 00-477667 Cover Assy. & Hinge (ML-134118, ML-134188, & ML-134257) ................................................ 137 SC-128-69 Mach. Screw 10-24 x 3/8 Tx. Button Hd. (SST) (ML-134118, ML-134188, & ML-134257) ....... 238 NS-032-01 Lock Nut 10-24 Hex (ML-134118, ML-134188, & ML-134257) ................................................ 239 SD-024-01 Self-Tapping Screw 10-24 x 3/8 Slotted Pan Hd., Type TT ........................................................ 240 SD-037-58 Self-Tapping Screw 10-24 x 3/8 Hex Button Hd., Type F

(ML-134118, ML-134188, & ML-134257) .................................................................................. 2


- 6 -


F-19154 Rev. C (August 2005)

ELECTRICAL COMPONENT PANEL – 1 PHASE

1619232425-26-27 2021

22 1718

T2L2

T1L1

PL-55617

28

29

30

31

1 2-3 4 5 6

7

8

1112910

13

14

15


- 7 -


F-19154 Rev. C (August 2005)



1 00-274031 Bracket – Support (Component Panel) (Top Cover) .................................................................. 12 00-087713-037-2 Contactor (115 V., 60 Hz., 1 Ph.) (30 Amp.) (2 Pole) ................................................................ 13 00-087713-037-1 Contactor (208/240 V., 60 Hz., 1 Ph.) (30 Amp.) (2 Pole) ......................................................... 14 SD-015-20 Self-Tapping Screw 10-32 x 3/8 Phil. Pan Hd., Type TT ............................................................. 25 00-274027 Panel – Component Mounting ..................................................................................................... 16 00-078752-00009 Clamp – Cable ............................................................................................................................. 17 SD-015-20 Self-Tapping Screw 10-32 x 3/8 Phil. Pan Hd., Type TT ............................................................. 18 SD-015-20 Self-Tapping Screw 10-32 x 3/8 Phil. Pan Hd., Type TT ............................................................. 29 00-088196-006-1 Relay – Thermal Overload (1 Ph.) .............................................................................................. 1

10 * Heater Element (Overload Relay) ............................................................................................ AR11 SC-060-03 Mach. Screw 10-24 x 3/4 Slotted Rd. Hd. ................................................................................... 112 WL-007-12 Lockwasher #10 External Shakeproof ..................................................................................... 1

**13 00-070486-00002 Cap – Capacitor End .................................................................................................................. 114 SD-015-20 Self-Tapping Screw 10-32 x 3/8 Phil. Pan Hd., Type TT ............................................................. 115 00-078752-00009 Clamp – Cable ............................................................................................................................. 1

**16 00-070487-00018 Capacitor (Motor Start) ............................................................................................................... 1**17 SD-029-06 Self-Tapping Screw 10-24 x 1/2 Phil. Flat Hd., Type F (SST) ..................................................... 2**18 00-066621-00001 Bracket – Capacitor (Motor Start) .............................................................................................. 1**19 00-274034 Capacitor (Motor Run) ................................................................................................................ 1

20 SD-015-20 Self-Tapping Screw 10-32 x 3/8 Phil. Pan Hd., Type TT ............................................................. 121 WL-007-12 Lockwasher #10 External Shakeproof ..................................................................................... 222 00-118544-00001 Lug – Solderless ........................................................................................................................ 1

**23 SD-015-20 Self-Tapping Screw 10-32 x 3/8 Phil. Pan Hd., Type TT ............................................................. 2**24 00-274032 Bracket – Capacitor (Motor Run) ............................................................................................... 1

25 00-274033 Nut – Well (Component Bracket) ................................................................................................ 226 SC-060-85 Mach. Screw 10-24 x 1 Slotted Rd. Hd. .................................................................................... 227 WL-007-12 Lockwasher #10 External Shakeproof ..................................................................................... 228 SD-015-20 Self-Tapping Screw 10-32 x 3/8 Phil. Pan Hd., Type TT ............................................................. 129 00-078752-00009 Clamp – Cable ............................................................................................................................. 130 SD-015-20 Self-Tapping Screw 10-32 x 3/8 Phil. Pan Hd., Type TT ............................................................. 231 00-087525-00669 Lead Wire Assy. ......................................................................................................................... 1

00-113703 Cable Tie ................................................................................................................................... AR

*Give Elec. Spec., Mach. Model, & Motor Type.**GE Motor Capacitors Mounted on Motor, Not Serviceable (See Page 23).


- 8 -


F-19154 Rev. C (August 2005)


PL-5572222 23

17 THRU 2021242526

27-28-29

30

31

32

331 2-3 4 5

6

7

89

1011

12

131415

16


- 9 -


F-19154 Rev. C (August 2005)



1 00-274031 Bracket – Support (Component Panel) (Top Cover) .................................................................. 12 00-087713-080-1 Contactor (208/240 V., 60 Hz., 3 Ph.) (30 Amp.) (3 Pole) ......................................................... 1

**3 00-087713-080-2 Contactor (480 V., 60 Hz., 3 Ph.) (30 Amp.) (3 Pole) ................................................................ 14 SD-015-20 Self-Tapping Screw 10-32 x 3/8 Phil. Pan Hd., Type TT ............................................................. 25 00-274027 Panel – Component Mounting ..................................................................................................... 16 00-078752-00009 Clamp – Cable ............................................................................................................................. 17 SD-015-20 Self-Tapping Screw 10-32 x 3/8 Phil. Pan Hd., Type TT ............................................................. 18 00-088196-005-1 Relay – Thermal Overload (3 Ph.) .............................................................................................. 19 * Heater Element (Overload Relay) ............................................................................................ AR

10 SC-060-03 Mach. Screw 10-24 x 3/4 Slotted Rd. Hd. ................................................................................... 111 WL-007-12 Lockwasher #10 External Shakeproof ..................................................................................... 112 SD-015-20 Self-Tapping Screw 10-32 x 3/8 Phil. Pan Hd., Type TT ............................................................. 113 SD-033-72 Self-Tapping Screw 10-32 x 7/8 Phil. Pan Hd., Type TT ............................................................. 214 00-271336 Terminal Block ............................................................................................................................. 115 SD-015-20 Self-Tapping Screw 10-32 x 3/8 Phil. Pan Hd., Type TT ............................................................. 116 00-078752-00009 Clamp – Cable ............................................................................................................................. 1

**17 00-294436-00003 Block – Fuse ............................................................................................................................... 1**18 FE-017-03 Fuse (2 Amp.) (W/Brake) ........................................................................................................... 1**19 FE-009-25 Fuse (0.5 Amp.) .......................................................................................................................... 1**20 SD-015-38 Self-Tapping Screw 6-32 x 3/8 Phil. Pan Hd., Type TT ............................................................... 1**21 SD-015-20 Self-Tapping Screw 10-32 x 3/8 Phil. Pan Hd., Type TT ............................................................. 1

22 SD-015-20 Self-Tapping Screw 10-32 x 3/8 Phil. Pan Hd., Type TT ............................................................. 123 WL-007-12 Lockwasher #10 External Shakeproof ..................................................................................... 224 00-118544-00001 Lug – Solderless ........................................................................................................................ 1

**25 00-101935 Transformer ............................................................................................................................... 1**26 00-436960 Transformer (W/Brake) .............................................................................................................. 1

27 00-274033 Nut – Well (Component Bracket) ................................................................................................ 228 SC-060-85 Mach. Screw 10-24 x 1 Slotted Rd. Hd. .................................................................................... 229 WL-007-12 Lockwasher #10 External Shakeproof ..................................................................................... 230 SD-015-20 Self-Tapping Screw 10-32 x 3/8 Phil. Pan Hd., Type TT ............................................................. 131 00-078752-00009 Clamp – Cable ............................................................................................................................. 132 SD-015-20 Self-Tapping Screw 10-32 x 3/8 Phil. Pan Hd., Type TT ............................................................. 233 00-087525-00669 Lead Wire Assy. ......................................................................................................................... 1

00-113703 Cable Tie ................................................................................................................................... AR

*Give Elec. Spec., Mach. Model, & Motor Type.**Above 250 V. Machines.


- 10 -


F-19154 Rev. C (August 2005)

BASE AND COLUMN(ML-104483, ML-104484, & ML-134118)

PL-57868

27

26

29

28

25

23 24

13-1412 11

45 THRU 50

38 THRU 44

36-37

109

5THRU

84

33 34

2-31

31

32

30

35

20

2122

15 THRU 19


- 11 -


F-19154 Rev. C (August 2005)

BASE AND COLUMN(ML-104483, ML-104484, & ML-134118)


1 00-437824 Cover – Bowl Support ............................................................................................................... 12 00-070641-00001 Thumb Screw (ML-104483 & ML-104484) ................................................................................ 43 SC-128-74 Mach. Screw 1/4-20 x 5/8 Tx. Button Hd. (SST) (ML-134118) .................................................... 44 SC-061-06 Cap Screw 5/16-18 x 13/4 Hex Flat Hd. ....................................................................................... 105 00-435267 Gib – Upper ................................................................................................................................ 26 00-435264-00001 Shim – Gib (0.003 Thk.) ............................................................................................................ AR7 00-435264-00002 Shim – Gib (0.005 Thk.) ............................................................................................................ AR8 00-435264-00003 Shim – Gib (0.010 Thk.) ............................................................................................................ AR9 00-435265 Gib – Center ............................................................................................................................... 2

10 00-435266 Gib – Lower ............................................................................................................................... 211 SC-023-19 Mach. Screw 1/4-20 x 3/4 Slotted Oval Hd. (SST) (ML-104483 & ML-104484) .......................... 212 SC-128-64 Mach. Screw 1/4-20 x 1 Tx. Flat Hd. (SST) (ML-134118) .......................................................... 213 00-274038 Cover – Top Assy. (Incls. Item 14) ............................................................................................. 114 00-123687-00007 Gasket ........................................................................................................................................ 115 00-435230 Vent – Air Intake (1 Ph.) (ML-104484) ....................................................................................... 116 00-435270 Gasket – Air ................................................................................................................................ 117 00-274668 Vent – Air Intake (1 Ph.) (ML-104483) ....................................................................................... 118 00-435236 Cover – Motor (3 Ph.) (ML-104484) .......................................................................................... 119 00-271300-00001 Cover – Motor (3 Ph.) (ML-104483) .......................................................................................... 120 SC-053-41 Mach. Screw 1/4-20 x 1/2 Slotted Truss Hd. (SST) (ML-104483 & ML-104484) ........................ 221 00-875377 Cover – Motor (ML-134118) ....................................................................................................... 122 SC-128-74 Mach. Screw 1/4-20 x 5/8 Tx. Button Hd. (SST) (ML-134118) .................................................... 223 SC-053-41 Mach. Screw 1/4-20 x 1/2 Slotted Truss Hd. (SST) (ML-104483 & ML-104484) ........................ 124 SC-128-74 Mach. Screw 1/4-20 x 5/8 Tx. Button Hd. (SST) (ML-134118) .................................................... 125 00-271299-00001 Cover – Lift Mechanism ............................................................................................................. 126 00-875476-00002 Column ........................................................................................................................................ 127 00-271227-002-2 Base Assy. ................................................................................................................................. 128 WL-004-11 Lockwasher 1/2 Medium .............................................................................................................. 429 SC-120-28 Cap Screw 1/2-13 x 2 Hex Hd. ................................................................................................... 430 00-087668-00002 Caster ......................................................................................................................................... 431 00-875748 Bowl Truck Assy. ....................................................................................................................... 132 00-018682-00001 Bumper ....................................................................................................................................... 433 SC-047-30 Set Screw 5/16-18 x 5/16 Hdls., Flat Pt. ......................................................................................... 234 SC-112-65 Set Screw 5/16-18 x 3/4 Hdls., Cone Pt. ....................................................................................... 235 00-011800-00118 Dowel ......................................................................................................................................... 236 SC-036-26 Cap Screw 5/16-18 x 7/8 Hex Hd. ................................................................................................. 237 WL-003-41 Lockwasher 5/16 Light ................................................................................................................. 238 00-438596 Bracket – Switch ....................................................................................................................... 139 00-438625 Insulator ...................................................................................................................................... 140 00-087711-00248 Switch – Bowl Height ................................................................................................................ 141 SC-021-05 Mach. Screw 4-40 x 5/8 Slotted Rd. Hd. (SST) .......................................................................... 242 WL-003-01 Lockwasher #4 Light ................................................................................................................. 243 WL-003-41 Lockwasher 5/16 Light ................................................................................................................. 144 NS-013-14 Nut 5/16-18 Hex ............................................................................................................................ 145 00-078752-00011 Clamp – Wire .............................................................................................................................. 146 SC-119-53 Mach. Screw 8-32 x 3/4 Slotted Pan Hd. (SST) ......................................................................... 147 SC-128-66 Mach. Screw 8-32 x 1/2 Tx. Button Hd. (SST) (ML-134118) ..................................................... 148 WS-019-16 Washer ....................................................................................................................................... 149 WL-007-07 Lockwasher #8 External Shakeproof ....................................................................................... 150 NS-009-12 Mach. Nut 8-32 Hex ................................................................................................................... 1


- 12 -


F-19154 Rev. C (August 2005)

BASE AND COLUMN(ML-134185, ML-134188, ML-134254, & ML-134257)

19 2120

PL-57869

27

26

28

29

24

17-18

25

2223

15-16

13-1411-12

41

504948

42-43

10 40

3637

3839

4544

4746

95

THRU8

4

33 34

2-31

31

32

30

35


- 13 -


F-19154 Rev. C (August 2005)

BASE AND COLUMN(ML-134185, ML-134188, ML-134254, & ML-134257)


1 00-435262 Cover – Bowl Support ............................................................................................................... 12 00-070641-00001 Thumb Screw (ML-134185 & ML-134254) ................................................................................ 43 SC-128-74 Mach. Screw 1/4-20 x 5/8 Tx. Button Hd. (SST) (ML-134188 & ML-134257) ............................. 44 SC-061-06 Cap Screw 5/16-18 x 13/4 Hex Flat Hd. ....................................................................................... 105 00-435267 Gib – Upper ................................................................................................................................ 26 00-435264-00001 Shim – Gib (0.003 Thk.) ............................................................................................................ AR7 00-435264-00002 Shim – Gib (0.005 Thk.) ............................................................................................................ AR8 00-435264-00003 Shim – Gib (0.010 Thk.) ............................................................................................................ AR9 00-435265 Gib – Center ............................................................................................................................... 2

10 00-435266 Gib – Lower ............................................................................................................................... 211 SC-023-19 Mach. Screw 1/4-20 x 3/4 Slotted Oval Hd. (SST) (ML-134185) ................................................. 212 SC-128-64 Mach. Screw 1/4-20 x 1 Tx. Flat Hd. (SST) (ML-134188 & ML-134257) ................................... 213 00-274038 Cover – Top Assy. (Incls. Item 14) ............................................................................................. 114 00-123687-00007 Gasket ........................................................................................................................................ 115 00-435270 Gasket – Air Intake ..................................................................................................................... 116 00-479512 Vent – Air Intake (1 Ph.) ............................................................................................................. 117 SC-053-41 Mach. Screw 1/4-20 x 1/2 Slotted Truss Hd. (SST) (ML-134185) ............................................... 218 SC-121-38 Mach. Screw 1/4-20 x 5/8 Hex Button Hd. (SST) (ML-134188) ................................................... 219 00-875377 Cover – Motor (3 Ph.) ................................................................................................................. 120 SC-053-41 Mach. Screw 1/4-20 x 1/2 Slotted Truss Hd. (SST) (ML-134185) ............................................... 221 SC-128-74 Mach. Screw 1/4-20 x 5/8 Tx. Button Hd. (SST) (ML-134188) .................................................... 222 SC-053-41 Mach. Screw 1/4-20 x 1/2 Slotted Truss Hd. (SST) (ML-134185 & ML-134254) ........................ 123 SC-128-74 Mach. Screw 1/4-20 x 5/8 Tx. Button Hd. (SST) (ML-134188 & ML-134257) ............................. 124 00-271299-00001 Cover – Lift Mechanism ............................................................................................................. 125 00-271343 Grommet – Handle ...................................................................................................................... 126 00-875476-00002 Column ........................................................................................................................................ 127 00-271227-002-2 Base Assy. ................................................................................................................................. 128 WL-004-11 Lockwasher 1/2 Medium .............................................................................................................. 429 SC-120-28 Cap Screw 1/2-13 x 2 Hex Hd. ................................................................................................... 430 00-087668-00002 Caster ......................................................................................................................................... 431 00-875748 Bowl Truck Assy. ....................................................................................................................... 132 00-018682-00001 Bumper ....................................................................................................................................... 433 SC-047-30 Set Screw 5/16-18 x 5/16 Hdls., Flat Pt. ......................................................................................... 234 SC-112-65 Set Screw 5/16-18 x 3/4 Hdls., Cone Pt. ....................................................................................... 235 00-011800-00118 Dowel ......................................................................................................................................... 236 SC-036-11 Cap Screw 1/4-20 x 2 Hex Hd. ................................................................................................... 237 WL-006-16 Lockwasher 1/4 Light .................................................................................................................. 238 SC-109-85 Set Screw 5/16-18 x 11/2 Hdls., Oval Pt. ...................................................................................... 139 NS-017-08 Jam Nut 5/16-18 Hex ..................................................................................................................... 140 00-271267 Block – Stop ................................................................................................................................ 141 SC-063-33 Set Screw 3/8-16 x 3/8 Hdls., Flat Pt. ........................................................................................... 242 SC-036-06 Cap Screw 1/4-20 x 1 Hex Hd. ................................................................................................... 443 WL-006-16 Lockwasher 1/4 Light .................................................................................................................. 444 00-087711-306-1 Switch – Bowl Height Sensing .................................................................................................. 145 00-438577 Bracket – Sensor ....................................................................................................................... 146 WL-006-16 Lockwasher 1/4 Light (SST) (Use to Mount Item 40) .................................................................. 147 NS-013-02 Nut 1/4-20 Hex (Use to Mount Item 40) ....................................................................................... 148 SC-053-46 Mach. Screw 1/4-20 x 3/4 Slotted Truss Hd. (SST) ..................................................................... 249 SC-124-50 Mach. Screw 1/4-20 x 3/4 Tx. Button Hd. (SST) .......................................................................... 250 00-522815 Loctite 271 Size 31 (50cc) ........................................................................................................ 2


- 14 -


F-19154 Rev. C (August 2005)

1

2

3 45

6

7

8

9

10

11-12

13

14-15

1819

20

21

39

40

2223

24

25

29

30

31

32

26-27

28

33 THRU 36

41-42

48

53

5554

45

44

67

565758

63

64

65

66

68

69

70-71

59 THRU 62

PL-55773

4950

52

51

46

1716

37

38

43

47

BOWL SUPPORT(ML-104483, ML-104484, & ML-134118)


1 NS-032-13 Lock Nut 5/16-18 Flexloc .............................................................................................................. 22 SC-037-75 Cap Screw 5/16-18 x 3/4 Hex Hd. ................................................................................................. 23 00-070411 Pin – Bowl Locating ................................................................................................................... 24 WS-004-18 Washer ....................................................................................................................................... 25 00-070057 Clamp – Bowl ............................................................................................................................. 26 00-070087 Washer – Spring ........................................................................................................................ 27 SC-062-28 Cap Screw 5/16-18 x 31/2 Hex Hd. ............................................................................................... 28 SC-068-14 Mach. Screw 8-32 x 3/8 Hex Hd. ................................................................................................ 29 00-435262 Cover – Bowl Support ............................................................................................................... 1


- 15 -


F-19154 Rev. C (August 2005)

BOWL SUPPORT(ML-104483, ML-104484, & ML-134118) (CONT.)


10 00-070044 Retainer – Bowl .......................................................................................................................... 111 SC-036-09 Cap Screw 1/4-20 x 11/4 Hex Hd. ................................................................................................ 212 WL-006-16 Lockwasher 1/4 Light (SST) ....................................................................................................... 213 WS-010-17 Washer ....................................................................................................................................... 114 NS-017-16 Jam Nut 3/8-16 Hex ...................................................................................................................... 115 SC-124-91 Cap Screw 3/8-16 x 21/2 Hex Hd. ................................................................................................ 116 00-435252-00002 Bearing – Bowl Lift Screw ........................................................................................................ 117 BB-005-30 Ball Bearing ................................................................................................................................ 118 00-024193 Gear – Bowl Lift Screw (31T) ................................................................................................... 119 WS-010-17 Washer ....................................................................................................................................... 120 NS-034-04 Lock Nut N.D. #N-03 ................................................................................................................... 121 WL-012-04 Lockwasher N.D. #W-03 ........................................................................................................... 122 00-024195-00002 Gear – Bowl Lift Miter (23T) ...................................................................................................... 123 RR-005-02 Retaining Ring (Spirolox) ............................................................................................................ 124 KW-003-03 Key – Woodruff 1/8 x 1/2 Lg. ........................................................................................................ 125 NS-032-29 Stop Nut 1/2-20 Flexloc ................................................................................................................ 126 00-024196-00002 Pinion – Bowl Lift Miter (23T) ..................................................................................................... 127 00-012430-00041 Key 3/16 Sq. x 5/8 Lg. .................................................................................................................... 128 RP-002-06 Roll Pin 1/4 Dia. x 1 Lg. ................................................................................................................. 229 00-089684 Handwheel Bracket & Bearing Assy. ........................................................................................ 130 PG-007-19 Grooved Pin – Type E 1/4 x 23/4 ................................................................................................... 131 00-024191 Shaft – Hand Wheel ................................................................................................................... 132 00-024192 Gear – Bowl Lift (41T) ............................................................................................................... 133 00-024614-00003 Washer – Miter Gear Spacer (0.086 Thk.) .............................................................................. AR34 00-024614-00004 Washer – Miter Gear Spacer (0.081 Thk.) .............................................................................. AR35 00-024614-00005 Washer – Miter Gear Spacer (0.076 Thk.) .............................................................................. AR36 00-024614-00006 Washer – Miter Gear Spacer (0.071 Thk.) .............................................................................. AR37 00-024194 Shaft – Miter Gear ...................................................................................................................... 138 RR-005-02 Retaining Ring (Spirolox) ............................................................................................................ 139 00-012430-00043 Key 3/16 Sq. x 7/16 Lg. ................................................................................................................... 140 WS-010-17 Washer ....................................................................................................................................... 241 SC-036-53 Cap Screw 3/8-16 x 7/8 Hex Hd. .................................................................................................. 142 WL-004-06 Lockwasher 3/8 Light .................................................................................................................. 143 00-024201 Retainer – Bowl Lift Nut ............................................................................................................. 144 00-024609-00001 Ring – Handwheel Bracket Clamping ........................................................................................ 145 SC-011-95 Mach. Screw 5/16-18 x 1 Fil. Hd. ................................................................................................. 446 WL-003-48 Lockwasher 5/16 High Collar ....................................................................................................... 447 00-024198 Nut – Bowl Lift Screw ............................................................................................................... 148 00-435268-00002 Lift – Bowl .................................................................................................................................. 149 SC-037-69 Cap Screw 5/16-18 x 13/4 Hex Hd. ............................................................................................... 250 WL-003-41 Lockwasher 5/16 Light ................................................................................................................. 251 00-438597 Bar – Switch .............................................................................................................................. 152 00-290052-00001 Screw – Bowl Lift ...................................................................................................................... 153 00-435269-00002 Support – Bowl .......................................................................................................................... 154 00-024765 Handle – Bowl Lift Handwheel .................................................................................................. 155 00-435235 Hand Wheel & Handle Assy. (Incls. Item 54) ............................................................................. 156 NS-048-20 Stop Nut 10-24 ............................................................................................................................ 457 NS-048-17 Stop Nut 3/8-16 Flexloc ................................................................................................................ 158 NS-048-24 Lock Nut 3/8-16 (ML-134118) ...................................................................................................... 159 00-438600 Plate – Bowl Lock ...................................................................................................................... 160 SC-053-46 Mach. Screw 1/4-20 x 3/4 Slotted Truss Hd. (SST) ..................................................................... 261 WS-003-07 Washer ....................................................................................................................................... 262 NS-032-08 Stop Nut 1/4-20 Flexloc ................................................................................................................ 263 00-438575 Spring – Torsion .......................................................................................................................... 164 00-438516 Spacer – Lever ........................................................................................................................... 165 00-438494 Spring – Extension ..................................................................................................................... 166 PC-006-32 Cotter Pin .................................................................................................................................... 167 SC-018-20 Mach. Screw 10-24 x 1/2 Slotted Pan Hd. .................................................................................. 468 SC-086-24 Shoulder Screw 1/2 Dia. x 11/2 Soc. Hex Hd. .............................................................................. 169 00-438413-00002 Lever – Bowl Lock ..................................................................................................................... 170 00-875737-00001 Solenoid (115 V. Coil) ................................................................................................................. 171 00-875737-00002 Solenoid (230 V. Coil) ................................................................................................................. 1


- 16 -


F-19154 Rev. C (August 2005)

29

313233

PL-55618

2627 28

30

25

21

22

24

20

191817

1640

3938

14 15

11

12

13

109

4

567

8

34

35

36

37

23

3

12

41

BOWL SUPPORT AND LIFT UNIT(ML-134185, ML-134188, ML-134254, & ML-134257)


- 17 -


F-19154 Rev. C (August 2005)

BOWL SUPPORT AND LIFT UNIT(ML-134185, ML-134188, ML-134254, & ML-134257)


1 NS-036-19 Stop Nut 5/16-18 Hex (SST) ......................................................................................................... 22 SC-037-75 Cap Screw 5/16-18 x 3/4 Hex Hd. ................................................................................................. 23 00-070411 Pin – Bowl Locating ................................................................................................................... 24 SC-062-28 Cap Screw 5/16-18 x 31/2 Hex Hd. ............................................................................................... 25 00-070087 Washer – Spring ........................................................................................................................ 26 00-070057 Clamp – Bowl ............................................................................................................................. 27 WS-004-18 Washer ....................................................................................................................................... 28 00-070044 Retainer – Bowl .......................................................................................................................... 19 WL-006-16 Lockwasher 1/4 Light (SST) ....................................................................................................... 2

10 SC-036-09 Cap Screw 1/4-20 x 11/4 Hex Hd. ................................................................................................ 211 00-271342 Spring – Counterbalance ............................................................................................................ 112 00-271345 Bracket – Spring ......................................................................................................................... 113 SC-036-06 Cap Screw 1/4-20 x 1 Hex Hd. ................................................................................................... 214 WL-006-16 Lockwasher 1/4 Light (SST) ....................................................................................................... 215 NS-013-02 Nut 1/4-20 Hex ............................................................................................................................. 216 RP-002-25 Roll Pin 1/8 Dia. x 7/8 Lg. ................................................................................................................ 117 00-068718 Rod – Bowl Lift ........................................................................................................................... 118 WS-008-47 Washer ....................................................................................................................................... 119 00-271259-00002 Arm – Bowl Lift .......................................................................................................................... 120 RP-002-26 Roll Pin 1/4 Dia. x 11/8 Lg. .............................................................................................................. 121 00-271269-00002 Bearing – Bowl Lift Handle ........................................................................................................ 122 WS-020-01 Washer (SST) ............................................................................................................................ 123 RP-002-25 Roll Pin 1/8 Dia. x 7/8 Lg. ................................................................................................................ 124 00-271322 Handle – Bowl Lift ...................................................................................................................... 125 RP-002-10 Roll Pin 3/16 Dia. x 1 Lg. ................................................................................................................ 126 WS-008-47 Washer ....................................................................................................................................... 127 00-438576 Bracket – Lower Lift .................................................................................................................. 128 WL-003-41 Lockwasher 5/16 Light ................................................................................................................. 229 SC-037-75 Cap Screw 5/16-18 x 3/4 Hex Hd. ................................................................................................. 230 00-070131 Washer – Cup Bowl Lift ............................................................................................................. 131 00-070104 Spring – Bowl Lift ....................................................................................................................... 132 WS-008-47 Washer ....................................................................................................................................... 133 NS-017-31 Jam Nut 1/2-20 Hex ...................................................................................................................... 134 00-271346 Bracket – Lower Spring Lift ....................................................................................................... 135 NS-017-31 Jam Nut 1/2-20 Hex ...................................................................................................................... 136 00-271319 Bumper ....................................................................................................................................... 237 00-435269-00001 Support – Bowl .......................................................................................................................... 138 WL-003-01 Lockwasher #4 Light ................................................................................................................. 239 SC-021-01 Mach. Screw 4-40 x 1/4 Slotted Rd. Hd. (SST) .......................................................................... 240 00-120332 Retainer – Magnet ...................................................................................................................... 141 00-111941 Magnet ........................................................................................................................................ 1


- 18 -


F-19154 Rev. C (August 2005)

TRANSMISSION CASE

32

33

34

31

30

29

PL-55774

1-2

3

4

5

6

7

8 1112

13

14

18

17

19

20

21

22

28

27

26 24-25

23

15 16

10

9


- 19 -


F-19154 Rev. C (August 2005)

TRANSMISSION CASE


1 00-271206-002-2 Case – Transmission (ML-104483, ML-104484, & ML-134118) ............................................... 12 00-271206-003-2 Case – Transmission (ML-134185, ML-134188, ML-134254, & ML-134257) .......................... 13 WL-003-44 Lockwasher 5/16 Medium............................................................................................................. 74 SC-120-38 Cap Screw 5/16-18 x 1 Hex Hd. .................................................................................................. 75 WL-003-37 Lockwasher 1/4 Medium .............................................................................................................. 46 SC-036-06 Cap Screw 1/4-20 x 1 Hex Hd. ................................................................................................... 47 00-271222-00002 Retainer – Bearing (Planetary Shaft) ........................................................................................ 18 SC-047-70 Set Screw 10-32 x 3/8 Hdls., Cup Pt. ......................................................................................... 29 SC-036-06 Cap Screw 1/4-20 x 1 Hex Hd. ................................................................................................... 4

10 WL-003-37 Lockwasher 1/4 Medium .............................................................................................................. 411 00-271225-00002 Retainer – Bearing (Worm Gear Shaft) ..................................................................................... 112 00-064871 Plug – Friction ............................................................................................................................. 113 00-271218-002-1 Transmission Case Cover Assy. ............................................................................................... 114 00-011800-00249 Dowel ......................................................................................................................................... 215 00-271340 Bar – Reinforcing ....................................................................................................................... 616 WL-004-06 Lockwasher 3/8 Medium .............................................................................................................. 617 SC-116-83 Cap Screw 3/8-16 x 11/2 Hex Hd. ................................................................................................ 618 00-011800-00118 Dowel ......................................................................................................................................... 219 00-437809 Gasket – Reed Housing ............................................................................................................. 120 00-437793-00002 Housing – Reed .......................................................................................................................... 121 SC-022-22 Mach. Screw 10-24 x 3/4 Slotted Flat Hd. (SST) ........................................................................ 222 00-437435 Spring – Reed Switch ................................................................................................................ 123 00-087711-304-1 Housing – Reed Switch ............................................................................................................. 124 SC-122-48 Mach. Screw 8-32 x 13/4 Slotted Rd. Hd. (SST) ........................................................................ 125 SC-122-75 Mach. Screw 8-32 x 2 Hex Button Hd. (SST) (ML-134118 & ML-134188) .............................. 126 SC-018-50 Mach. Screw 6-32 x 1/4 Slotted Pan Hd. .................................................................................... 227 NS-031-08 Nut – Stop Special 8-32 Hex (SST) ............................................................................................ 128 FP-085-17 Pipe Plug 5/8 Hex Socket ............................................................................................................. 129 00-437809 Gasket – Reed Housing (ML-134185, ML-134188, ML-134254, & ML-134257) ...................... 130 00-874974 Plate – Transmission Cover (ML-134185, ML-134188, ML-134254, & ML-134257) ................ 131 SC-022-22 Mach. Screw 10-24 x 3/4 Slotted Flat Hd. .................................................................................. 232 00-874990 Extension – Bowl Guard Switch (ML-134185, ML-134188, ML-134254, & ML-134257) ........ 133 SC-075-14 Set Screw 6-32 x 1/8 Hex Hdls., Cup Pt. .................................................................................... 134 00-874958 Switch – Reed & Extension (ML-134185, ML-134188, ML-134254, & ML-134257) ................ 1

00-0682

Documents

D340 MIXER TECHNICAL MANUAL (ML-134254) (208/60/3)The D340 Mixer is a medium-duty mixer which develops 1 1/ 2 horsepower and features a timer, thermal overload protection and a #12