HOME PROFILE PHOTO GALLERY WORK WITH US SITEMAP CONTACT US

Lion Rubber Industries Pvt. Ltd

D Type Fenders

LION DD FENDERS

Lion D type fenders are used for tugs, barges, workboats and pilot boats as side belting and protective fenders against heavy

rubbing, brushing forms. These D type fenders display a higher energy absorption capacity, thus minimizing deface contact.

These fenders can also be mounted on quay are by means of anchor belts. Lion D type fenders are supplied with D hole Rounded

hollow or solid. Long length D fenders can be supplied to match the Aft or Bow radius.

PERFORMANCE AT 50% DEFLECTION

Product

Reference

Base x Height x D hollow

mm

R

(Ton /m)

E

(Ton / M /m)

LRI-DD100 100 x 100 x 50 11.0 0.15

LRl-DD150 150 x 150 x75 14.3 0.36

LRl-DD200 200 x 200 x 100 19.0 0.63

PRODUCTS

Installation E 1

A B C D E F G H Flat Bar Bolt Size

100 100 50 50 30 15 90-130 200-300 40x5 M12

120 120 60 60 30 15 90-130 200-300 40x5 M12

150 150 75 75 40 20 110-150 250-300 60x8 M16

200 200 100 100 50 25 130-180 300-400 80x10 M20

250 250 125 125 60 30 140-200 350-450 90x12 M24

300 300 150 150 60 30 140-200 350-450 100x12 M24

LRl-DD200 200 x 200 x 100 19.0 0.63

LRl-DD250 250 x 250 x 125 23.4 0.98

LRl-DD-300 300 x 300 x 150 28.5 1.42

LRl-DD-350 350 x 350 x 175 33.5 1.91

LRl-DD-400 400 x 400 x 200 38.0 2.52

Drilling holes and installation method of Lion DD type Fenders

300 300 150 150 60 30 140-200 350-450 100x12 M24

400 400 200 200 75 35 140 - 200 350-450 150x15 M30

Installation E 2

DO FENDERS

PERFORMANCE AT 50% DEFLECTION

Product

Reference

Base x Height x Round Hollow

mm R

(Ton / m)

E

( Ton / M/m)

LRI-DO100 100 x 100 x 50 19.0 0.15

LRI-DO150 150 x 150 x75 21.8 0.39

LRI-DO200 200 x 200 x 100 29.0 0.70

LRI-DO250 250 x 250 x 125 36.3 1.09

LRI-DO300 300 x 300 x 150 43.5 1.58

LRI-DO350 350 x 350 x 175 51.0 2.15

LRI-DO400 400 x 400 x 200 56.0 2.81

Drilling holes and installation method of Lion DO type Fenders

A B C D E F G H Flat Bar Bolt Size

100 100 50 15 25 10 90/130 200/300 50x6 M12

125 125 50 15 25 12 90/130 200/300 50x6 M12

150 150 60 20 30 12 110/150 250/350 60x8 M16

200 200 100 25 45 15 130/180 300/400 80x10 M20

250 250 100 30 50 20 140/200 350/450 100x10 M24

300 300 125 30 60 25 140/200 350/450 110x12 M24

400 400 200 35 80 30 140/200 350/450 130x15 M30

Apart for the above, any other size, shape can be developed as per customized formats

The data above, are examples for reference only and are not as any specific standards. They can be accepted as per one's

requirement.

2010 - © lion rubber industries pvt. Ltd. , all rights reserved.