Upload
others
View
5
Download
0
Embed Size (px)
Citation preview
-1-
FAQ : How to configure QoS
Technical Support Setup Procedure
FAQ: How to configure QoS
Release date: 9/07/2015
Model Support: DSL-2877AL
H/W: A1 , A2
S/W: 1.00.10TH
-2-
FAQ : How to configure QoS
Technical Support Setup Procedure
การตั้งค่า QoS สามารถท าไดอ้ยา่งไร ขั้นตอนท่ี 1 : เปิดเวบบราวเซอร์ของคุณ แลว้พิมพ ์ http://192.168.1.1 ในช่องของ Address Bar
ช่ือผูใ้ชง้านท่ีมาจากโรงงานคือ admin แลว้ใส่รหสัผา่นของคุณ ในกรณีรหสัผา่นไม่ไดมี้การเปล่ียนแปลง ใหใ้ช้ค่าท่ีมาจากโรงงานเป็น admin แลว้คล๊ิก Login
-3-
FAQ : How to configure QoS
ขั้นตอนท่ี 2 : คล๊ิกบนแทบ็ของ Status ท่ีอยูท่างดา้นบนแลว้คล๊ิก Device Info จากมนูท่ีอยูท่างดา้นซา้ยมือ (WAN Connection รวมหมายถึง Bridge , MER , PPPoE)
-4-
FAQ : How to configure QoS
ขั้นตอนท่ี 3 : คล๊ิกบนแทบ็ของ Advanced ท่ีอยูท่างดา้นบนแลว้คล๊ิก Enable QoS : Advanced > Network Tools
> QoS > Enabled QoS Activated
-5-
FAQ : How to configure QoS
ขั้นตอนท่ี 4 : คล๊ิกบน Add, delete เพื่อท าการตั้งกฏของ QoS : ADVANCEDNetwork ToolsQoS
ตวัอยา่งการตั้ง QoS Rule
1.Add DVR rule
ในกรตั้งค่าจะตอ้งทราบ IP Address ของ DVR และพอร์ตท่ีใช ้เพราะวา่ ตอ้งการให ้DVR มี Priority สูงสุด เลือก Highest Priority แลว้คล๊ิกเพื่อบนัทึกการตั้งค่า Note : ถา้ใชง้านผา่นพอร์ตแลน (พอร์ตท่ี 1) ส าหรับ DVR ใหเ้ลือกพอร์ต eth0
-6-
FAQ : How to configure QoS
2. Add Mail rule
ในการตั้งค่าจะตอ้งระบุโปรโตคอล และพอร์ตท่ีใช ้เพราะวา่ ตอ้งการให ้Mail มี Priority สูงรองจาก DVR ให้เลือกเป็นล าดบัความส าคญัเป็น High แลว้คล๊ิกเพื่อบนัทึกการตั้งค่า
-7-
FAQ : How to configure QoS
3. Add Web rule
ในกรตั้งค่าจะตอ้งระบุโปรโตคอล และพอร์ตท่ีใช ้เพราะวา่ ตอ้งการให ้WEB มี Priority สูงรองจาก DVR และ Mail ใหเ้ลือกเป็นล าดบัความส าคญัเป็น Medium แลว้คล๊ิกเพื่อบนัทึกการตั้งค่า
-8-
FAQ : How to configure QoS
Technical Support Setup Procedure
How do I configure of QoS on my router?
Step 1: Open your Internet browser and enter http://192.168.1.1 into the address bar.
Enter your login information. If you have not changed the default settings, the
- Username field is Admin and
- Password field should Admin. Click Login.
-9-
FAQ : How to configure QoS
Step 2: Click on the Status Tab at the top and then click Device Info on the left side as shown (WAN Connection include Bridge , MER , PPPoE)
-10-
FAQ : How to configure QoS
Step 3: Click on the Advance Tab at the top and then click Enable QoS : Advanced > Network Tools > QoS >
Enabled QoS Activated
Step 4: Click Add, delete, edit QoS rules:ADVANCEDNetwork ToolsQoS
Example for edit QoS Rule
1.Add DVR rule
-11-
FAQ : How to configure QoS
In accordance with the actual DVR PC IP address and port number set, because the DVR is the highest priority, in
classify queue selects the highest priority queue click the apply button to save.
Note: If use interface eth0 for DVR service, please select eth0 port, etc.
-12-
FAQ : How to configure QoS
2. Add Mail rule
Configure the protocol and port number for the Mail, and configure the queue
for a second priority queue.
-13-
FAQ : How to configure QoS
3. Add Web rule
Configure the protocol used by WEB, and port number, and configure the queue for a third priority queue.
-14-
FAQ : How to configure QoS
ฝ่ายสนับสนุนทางด้านเทคนิค Call Center หมายเลขโทรศัพท์ 02-6617997 ภาษาไทย : จนัทร์ ถึง ศุกร์ เวลา 9.00 น. – 18.00 น. Thai : Mon – Fri : Time 9.00 – 18.00. ภาษาองักฤษ : เสาร์ , อาทติย์ , วันหยุดนขัตฤกษ์ และ วนัธรรมดา หลงั 18.00 น. English : Sat – Sun , Public Holiday and after 18.00 weekday. Website : www.dlink.co.th
email: [email protected] Facebook : http://www.facebook.com/DLinkThailandFans
-15-
FAQ : How to configure QoS
Nationwide D-Link Service Centres :