Embed Size (px)
Citation preview
The
Bladerunner
P.O. Box 1838, Thousand Oaks, California 91358-0838
January 2018
www.cvwa.org Issue #255
_____________________________________________________________________________________ Issue #255 Page 2
Calendar of Upcoming Events
January 10 -- (NOTE: This is the SECOND WEDNESDAY of the month.) Regular Meeting: 7:00PM, Final Nominations for Officers and Directors. Presentation: Bill Aurand – “What you need to know before building kitchen cabinets” slide presentation
January 9 -- Just Coffee get-together 10:00am to 11:30am Oaks Mall Food Court January 17 -- CVWA Breakfast, Pickles Newbury Park, 1940 Newbury Road #100 January 18 -- CVWA Board of Director's Meeting 7:00 PM to 9:00 PM President's home January 26 -- CVWA Breakfast 9:00 AM to 10:00 AM Denny's Camarillo
February 8 -- (NOTE: This is the Second Thursday of the month.) Regular Meeting:
7:00PM, Election of New Officers and Directors. Challenge: TBD. Program: Dave Seidler – “Sandpaper, Abrasives & Scraping Tools”
February 13 -- Just Coffee get-together 10:00am to 11:30am Oaks Mall Food Court February 21 -- CVWA Breakfast, Pickles Newbury Park, 1940 Newbury Road #100 February 22 -- CVWA Board of Director's Meeting 7:00 PM to 9:00 PM President's home February 23 -- CVWA Breakfast 9:00 AM to 10:00 AM Denny's Camarillo
March 1 -- Regular Meeting: 7:00PM, Installation of New Officers and Directors. Challenge:
TBD. Program: Mike Pentecost – “Sharpening Hand Saws” March 13 -- Just Coffee get-together 10:00am to 11:30am Oaks Mall Food Court March 21 -- CVWA Breakfast, Pickles Newbury Park, 1940 Newbury Road #100 March 22 -- CVWA Board of Director's Meeting 7:00 PM to 9:00 PM President's home March 23 -- CVWA Breakfast 9:00 AM to 10:00 AM Denny's Camarillo
April 5 -- Regular Meeting: 7:00PM, Challenge: TBD. Program: Ed Reed – “Segmented
Turning” April 10 -- Just Coffee get-together 10:00am to 11:30am Oaks Mall Food Court April 18 -- CVWA Breakfast, Pickles Newbury Park, 1940 Newbury Road #100 April 19 -- CVWA Board of Director's Meeting 7:00 PM to 9:00 PM President's home April 27 -- CVWA Breakfast 9:00 AM to 10:00 AM Denny's Camarillo
President's Message
Hello Fellow Woodworkers! Can you believe it’s the start of another year already? They sure seem to go by faster and faster! Hope you all had a wonderful Holiday Season. My wife and I got to spend time with family and it was great.
_____________________________________________________________________________________ Issue #255 Page 3
I do have some sad news to report. Howard Ford has passed away. His son let us know. Howard was one of the founding Members of the Club and a past President as well. The New Constitution was voted on and passed at the December Meeting. If you want a copy emailed to you please email [email protected]. Remember, nominations for the new Board will be held at this Meeting. The Club really needs new people to fill all of the positions. Most of the old Board Members have served for many years and will not be continuing. With the new Constitution structure, Board positions are flexible. This is your chance to give back to the Club without overly committing too much time. Again, please consider donating your time and energy to keep the Club healthy and strong. Elections are held at the February Meeting and the New Board is installed in March. Hope to see you at the meeting on WEDNESDAY JANUARY 10!
Tom Tom Welz, President Conejo Valley Woodworkers Association
Goodies for Free
***Early Bird Special*** Arlen’s done it again! Free Wood!
Come early to this month’s Meeting and look through Arlen’s pickup for Arlen Wood. Bring a flashlight to help see inside the truck and pick out the best pieces! First come first serve!
Holiday Party Bill and Julie Aurand hosted the December Holiday Party. We all ate well and had a wonderful time! 38 people attended. There were several door prizes and the gift exchange was fun as well. Thanks to all who brought great food and especially Bill and Julie for all their hard work!
_____________________________________________________________________________________ Issue #255 Page 4
_____________________________________________________________________________________ Issue #255 Page 5
_____________________________________________________________________________________ Issue #255 Page 6
_____________________________________________________________________________________ Issue #255 Page 7
Motion – Notice to Change Constitution The proposed New Constitution was voted on and passed at the December Meeting. If you want a copy emailed to you, please send a request to: [email protected].
Changes to 2018 Meeting Dates Redwood School has a few of the 1st Thursdays of the month reserved for special events in 2018. See Calendar above for the first several Meeting dates. January is on the 2nd Wednesday of the month and February is on the 2nd Thursday of the month.
December Toy Program On December 13th, Bill Aurand and Arlen Handberg met with Commander Stephanie Shannon and Chief Dave Livingstone of the Simi Valley Police Department and dropped off all of the 877 toys that our Members made.
_____________________________________________________________________________________ Issue #255 Page 8
Toys: Who Made What
Bill Aurand - Redwood Heart Boxes
Tom Welz – Cameras
_____________________________________________________________________________________ Issue #255 Page 9
Bill Battocchio – Helicopters / Cars / Jewelry Boxes with Jewelry
_____________________________________________________________________________________ Issue #255 Page 10
Dave Seidler – Cars & Boxes
_____________________________________________________________________________________ Issue #255 Page 11
Arlen Handberg – Cars / Tractors / Airplanes / Tops / Jewelry Boxes / Mini Helicopters
Felix Masci (with help from Chuck Griswold) – Heart Shaped Boxes
_____________________________________________________________________________________ Issue #255 Page 12
Charlie North – Boats & Toasters
Bill Watkins – Small Animals
_____________________________________________________________________________________ Issue #255 Page 13
Dan Waingrow - Disc Helicopters
Raffle Prizes for January Raffle prizes at the January meeting will be:
Bessy F Clamps
(2)
$50 Woodcraft
Gift Certificate
Black & Decker Screw Gun
Wood River
Multitool
_____________________________________________________________________________________ Issue #255 Page 14
December Show & Tell Christian Ziegler gave a short presentation on his “Hand Made Workbench“. He and Judi are relocating to Reno Nevada this month and will be missed! Thank you both for all you brought to the Club and good luck!
Large Projects Many of you work on large projects that are too cumbersome to carry to meetings. Just send a couple of photos so we can feature them in the Bladerunner. Send to Editor Tom Welz at [email protected]
Goodies for Sale Art Shaffman still has tools that he would like to sell. He would love to see them go to his fellow woodworkers. If interested, please contact Art at [email protected].
✏ Power tools: Rockwell 10” Unisaw -new 2 HP motor and belts 6 mos. ago. 220 volt 2 nylon blade inserts & 2 aluminum inserts 1 for dado. He has a Rockwell dado set and a VERY SUPER COOL tm. Fence, many blades all of which have been resharpened, or are brand new in packages. Also, Rockwell 6” dado set.
✏ Bandsaw: Grizzly 14” w/ base cabinet and HTC rolling base under - 220 volt 1.5 H.P. with
numerous blades from 1/8” to 3/4”. All are very lightly used.
_____________________________________________________________________________________ Issue #255 Page 15
✏ Thickness planer: Dewalt DW 734 mounted on very strong Dewalt rolling base. 115 volt.
✏ Dust collector: Harbor Freight 2 H.P. with aftermarket $250 metal / pleated air filter; just tap the filter to clean it. 115 volt
✏ Router(s): Bosch 2.3 H.P. w/ bases for hand hold and for under table mounting and fence. Porter
cable #690 with same attachments extra collets for both. All bits are carbide 1/2” shanks Separately Freud Boxed kit dovetail bits, Freud boxed kit of rounder bits, Freud boxed, new adjustable tongue and groove set. Kreg router table, Kreg fence. Heavy duty custom built router table with storage drawers. Porter Cable 351 belt sander.
✏ Hand tools new: Veritas: plow plane with numerous blades. Veritas inlay string scraper. 11 Two
Cherry brand chisels from 5-30mm. These are the ones with polished steel. Lie Nielsen 1/8” - 1” bevel edge socket chisel plus three of the long handles. Primus all wood smoothing plane, Lignum Vitae sole. Narex dovetail chisels 1/2” and 3/4” Veritas set of 4 cabinet scrapers. Veritas jointer edger. Kunz burnisher.
✏ Used Hand tools: Ishihisa smoothing plane 65mm. Hida 3mm bench chisel Wezu: 3" 6” 8”
machinist square. Nikon Kebiki marking gauge (3) Bessy 18” parallel jaw clamps, (4) Jet 30” (2) Jet 40" parallel jaw clamps, other marking gauges incl Veritas wheel scoring gauge, wooden, steel marking gauge for mortise. Bi-directional marking knives. 13mm Japanese mortise chisel. Garland leather hammer & far too many other items to include.
Woodworking Ideas
As you surf the net for good working information, share them with the rest of us. Email any good links to our Webmaster, Aubrey Grey [email protected] or Editor Tom Welz [email protected]
Good Woodworking Sites for Videos Videos: www.woodworkersjournal.com/videos Tricks of the Trade > page 2 > How to Coil a Band Saw Blade 2:12 Latest Uploads > page 2 > Tip for Cutting Plywood Safely and Accurately 2:23 Latest Uploads > page 3 > Simple Tip for Removing Pencil Marks 0:56 Latest Uploads > page 1 > How to Cut Plexiglass Without Chipping 2:23 Latest Uploads > page 1 > How to Cut Circles on a Table Saw 4:15 Table Saws > page 1 > Making Safe Cuts Using a Custom Push Block and Zero-‐ Clearance Throat Plate 6:00 Table Saws > page 1 > Safe Rip Cuts with a Table Saw & Push Sticks 9:00 Table Saw > page 1 > Making Box Joints with Templates 8:36 Routers > page 1 > Router Joinery Basics: Dado Jig 5:25 Tricks of the Trade > page 1 > Plane Thin Panels Safely with this Sled Jig 3:19 The Wood Whisperer/ 2009 Oil Based Finish by Marc Spagnuolo 36:39 mins YouTube Videos Unboxing and assembly of a Powermatic 3520B Lathe by Ed Reed
https://www.youtube.com/watch?v=PZkdqnsYL_U The Physics of Bandsaw Resawing by Matthias Wandel 6:46 https://youtu.be/fK9m5PadmiI Making Zero Clearance Table Saw Inserts by Matthias Wandel 9:18 https://youtu.be/Jgh1Hqg1LY8
_____________________________________________________________________________________ Issue #255 Page 16
Table Saw Kickback by Andy Rawls 8:25 https://youtu.be/u5F9TiHF2tc Table Saw Safety-‐ Kickback and Hot Dog Demo This Old House 4:10 https://youtu.be/hRygWpXXYJ4 Kickback on Camera by NewWoodworker.com 4:57 https://youtu.be/u7sRrC2Jpp4 The Wood Whisperer/ 2017 Shop Tour by Marc Spagnuolo 34 mins https://youtu.be/48qxudcYPrU?t=2 The Wood Whisperer/ 2009 Oil Based Finish by Marc Spagnuolo 36:39 mins https://youtu.be/pCzblO0f8P8?t=5
Southern California Tool Swap Meets
Anderson Plywood Four swap meets per year Third Saturday of February, May, August, and November 6 AM-NOON 4020 Sepulveda Blvd. Culver City, CA 90230 John Arenson / 310-397-8229
San Diego Rockler Swap Meet Two swap meets per year First Sunday of April (except Easter) and November 6 AM-NOON 8199 Clairemont Mesa Blvd. San Diego, CA 92111 Bill Collins / 619-232-4626
Arroyo Swap Meet Two swap meets per year Second Saturday of June and September 6 AM-NOON / Limited Dealer Spaces 2707 E. Foothill Blvd. Pasadena, CA 91107 Bob Wilbur / 626-447-5466
PAST San Diego Swap Meet One swap meet per year Friday before the Third Weekend of January 6 AM-NOON Four Points Sheraton Hotel 8110 Aero Dr. San Diego, CA 92123 Bob Wilbur / 626-447-5466
SoCal Old Tool Swap Meets To be on an email reminder list for upcoming events, send your name and email address to [email protected]
Club Roster
Any member wishing to have a roster of CVWA members, please email a request to Dave Seidler, [email protected]
_____________________________________________________________________________________ Issue #255 Page 17
Vendor List The following vendors support us by offering discounts to those with a valid membership card. American Fastening Systems Inc 591 Constitution Ave. “D” Camarillo. 805 388-1552 Ask for Al Redline www.americanfasteningsystems.com
Conejo Electric Motor 31200 La Baya #305 Westlake Village 805 495-0556 See Bill Butler www.conejoelectricmotor.com
Conejo Hardwoods 31275 La Baya, Thousand Oaks 805 497-0025 www.conejohardwoods.com
Decor Paint 2820 Thousand Oaks Bl Thousand Oaks, 805-495-7097 http://www.decorpaintstore.com
Do It Center 3775 Thousand Oaks Blvd. Thousand Oaks 805 497-2753 www.doitcenter.com
Far West Plywood 18450 Parthenia St. Northridge. 818 885-1511 www.farwestplywood.com
Integrity Wood Products 7836 Alabama Ave. Canoga Park 818 704-7490 www.integritywoodproducts.com
Mayan Lumber 2930 Los Olivos, Oxnard 805 981-4555 www.mayanhardwood.com
Peterman Lumber 720 Graves Ave. Oxnard. 805 987 3877 www.petermanlumber.com
Roadside Lumber & Hardware 29112 Roadside Drive, Agoura Hills 805 497-1486 Code: 1230 www.roadsidelumber.com
Rockler Pasadena 83 south Rosemead Blvd Pasadena 91107 www.rockler.com
Rockler Torrance 20725 Hawthorne Bl. Torrance. 310-542-1466 www.rockler.com
Siggia Hardware 16260 Raymer St. Van Nuys 818-787-1650 www.siggia.com Sign up on www.siggia.com and mention CVWA for contractor pricing
Sun Brothers Enterprises. 4350 Eileen St. Simi Valley 805 526-5794 www.sunbrothersenterprises.com
Superior Moulding 5953 Sepulveda, Van Nuys 91411 818 376-1415 (15% discount) www.superiormoulding.com
Valencia Lumber and Panel 15809 Strathern St. Van Nuys. 866-811-2909 www.valencialumber.com
Woodcraft Orange County Beach Bl. @ 22 Fwy.
_____________________________________________________________________________________ Issue #255 Page 18
10% excludes sale items and power tools. www.woodcraft.com/stores/store.aspx?id=553
CVWA Board of Directors Elected Officers President Tom Welz (805) 630 1299 [email protected]
Vice President Bill Aurand (805) 231 9656 [email protected]
Secretary Mike Pentacost (805) 526-6482
Treasurer Charlie North (805) 427-5370 [email protected]
Membership Dave Seidler (805) 491-2599 [email protected]
Communications Randy Spengler [email protected]
Past President Christian Ziegler (805) 876-0252 [email protected] Appointed Positions Mentor Program Dave Seidler (805) 491-2599 [email protected]
Librarian Robert Wilson [email protected]
Safety Award Recognition TBD
Webmaster Aubrey Grey (805) 494-9409 [email protected]
Toy Project Bill Aurand and Arlen Handberg
Editor Tom Welz (805) 630-1299 [email protected]
Sound Saxon Robbins
Raffle
Bill Battocchio (805) 482-0832 [email protected] Rande Bence (805) 349-5507
Refreshments
Willard Anderson (805) 484-39850 [email protected] Jim Goram (805) 402-2415 [email protected]
Auction Will Robbins 805 241 7984 [email protected]
Silent Auction TBD
