CVA 5060 Coffe Machine

7/27/2019 CVA 5060 Coffe Machine

1/76

Operating and installation instructions

Built-in coffee machinesCVA 5060CVA 5068

To avoid the risk of accidents

or damage to the machine,it is essential to read theseinstructions before it is installedand used for the first time. M.-Nr. 07 816 870

en - GB


2/76

Caring for the environment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5

Guide to the machine . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6

Accessories supplied . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8

Optional accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9

Warning and Safety instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10

Using the coffee machine - first steps . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14

Controls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14

Display . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14

Before using for the first time. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14

Switching on . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14

Switching off . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15

Filling the water and coffee bean containers . . . . . . . . . . . . . . . . . . . . . . . . . . 16

Filling the water container . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16

Filling the coffee bean container . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17

Making drinks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18

Switching on . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18

Pre-warming cups . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18

Adjusting the height of the central spout . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19

Preparing espresso and coffee from freshly ground beans . . . . . . . . . . . . . . . . . 19Double portion . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20

Cancelling preparation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20

Making espresso and coffee using ready ground coffee . . . . . . . . . . . . . . . . . . . 20

Adding ground coffee. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20

To make a drink . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21

To cancel preparation. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21

Drinks with milk . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21

Stainless steel milk flask . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21Cappuccino, latte macchiato, hot milk, milk froth. . . . . . . . . . . . . . . . . . . . . . . 22

User profile drinks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23

After use. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23

Setting the coffee grinder . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24

Contents


3/76

Settings: customising your machine . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25

Settings menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25

Selecting a language. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26

Setting the time of day . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27Setting the timer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28

Coffee jug (making several cups one after the other) . . . . . . . . . . . . . . . . . . . . . . 30

Setting the amount of coffee . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30

Setting Pre-brewing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31

Setting the temperature . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31

Setting Automatic rinsing. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32

Setting the Steam system . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32

Lighting: Setting the brightness . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33Lighting: Setting the switch-off time. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33

Info (showing the number of drinks) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34

Safety (Activating the System lock) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34

To activate or deactivate the System lock . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34

To override the System lock . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35

Setting the water hardness . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35

Setting the display . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36

Setting the volume (keypad tone, buzzer). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36Activating the plate warmer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37

Showroom programme . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38

Resetting the factory default settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38

Miele|home. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39

Programming the amount: setting the portion sizes . . . . . . . . . . . . . . . . . . . . 40

Programming the amount of espresso, coffee, hot milk and milk frothvia the OK sensor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40

Programming the proportions for cappuccino or latte macchiatovia the OK sensor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41

Programming the amount for hot water via the Hot water sensor . . . . . . . . . . . . . 42

Programming the amount via "Settings". . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42

Setting up User profiles . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43

Selecting a User profile . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43

Creating a User profile. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44

Changing a User profile. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44

Deleting a User profile . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45

Revert. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45

Contents


4/76

Cleaning and care . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46

Quick guide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46

Rinse the system . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47

Milk pipework . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48Rinse milk pipework . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48

Clean milk pipework . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48

Clean milk pipework of any blockages. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 49

Stainless steel milk flask . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 51

Central spout . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52

Water container . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 53

Waste container . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 53

Drip tray . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 54Drip tray cover . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 54

Coffee bean container . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 55

Central spout connector . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 55

Interior and machine door . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 55

Brew unit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 56

Degreasing the brew unit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 57

Machine front . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 58

Descaling the machine . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60

To run the descaling programme . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 61

Problem solving guide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 62

After Sales / Guarantee . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 70

Electrical connection U.K., ZA, IRL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 71

Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 72

Building-in and combination options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 72

Installation. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 73Adjusting the door hinges. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 74

Contents


5/76

Disposal of the packingmaterial

The transport and protective packing

has been selected from materials whichare environmentally friendly fordisposal, and should be recycled.

Ensure that any plastic wrappings,bags, etc. are disposed of safely andkept out of the reach of babies andyoung children. Danger of suffocation.

Dispose of or recycle all packagingmaterials safely as soon as possible.

Disposal of your old machine

Electrical and electronic machinesoften contain materials which, if

handled or disposed of incorrectly,could be potentially hazardous tohuman health and to the environment.They are, however, essential for thecorrect functioning of your machine.Please do not therefore dispose of itwith your household waste.

Please dispose of it at your localcommunity waste collection/recycling

centre, or contact your Dealer foradvice. Ensure that it presents nodanger to children while being storedfor disposal.

Caring for the environment

5


6/76

Exterior view

aOn/Off sensor for switching the coffee machine on and off

bDisplay

cLeft arrow, for scrolling through the various programme options

dOK sensor, for confirming the selection of a programme option and for saving a

setting

eRight arrow, for scrolling through the various programme options

fSensor for selecting hot water

gDoor grip

hHot water spout

iLighting

jDrip tray cover

kCentral spout, height-adjustable

lStainless steel milk flask

Guide to the machine

6


7/76

Interior view

aMaster switch

bGround coffee chute cover

cGround coffee chute

dSlide control to select fineness of ground coffee

eCoffee bean container

fDrip tray with grid for easier carrying

gWater container

hBrew unit

iWaste container

jCentral spout connector (connecting the brew unit and the central coffee spout)

kStainless steel milk flask

lCentral spout connector cap

Guide to the machine

7


8/76

Stainless steel milk flask

For storing and keeping milk cold, with lid (with handle) andadditional cap

(not suitable for cleaning in a dishwasher)

Containers

Large and small containers for cleaning and rinsing the milkpipework

Coffee spoon

For adding the correct amount of ground coffee

Cleaning powder

For daily cleaning of the milk pipework

Cleaning tabletsFor cleaning the brew unit

Descaling tablets

For descaling the water pipework

Other accessories and spare parts

Test strips for determining the water hardness level

Air intake tube for placing on the central spout

Silicone grease for lubricating the cap on the central spoutconnector

Brush for cleaning the milk pipework

Mains connection cable Central spout connector cap

Accessories supplied

8


9/76

Miele accessories and cleaning and conditioning productsare available for your coffee machine.These can be ordered via the internet atwww.miele-shop.com, from the Miele Spare Parts Department

or from your Miele Dealer.

Stainless steel milk flask with cap

For storing and keeping milk cold(not suitable for cleaning in a dishwasher)

Cleaning powder

For daily cleaning of the milk pipework

Cleaning tablets

For cleaning the brew unit

Descaling tablets

For descaling the water pipework

E-Cloth (microfibre cloth)

Removes finger marks and light soiling

Silicone grease

For lubricating the cap on the central spout connector

Miele|home

With Miele|home, the coffee machine becomes acommunication-enabled appliance which can be monitoredor operated via a PC or mobile phone. For further information,

contact your nearest Miele sales office.

Optional accessories

9


10/76

This coffee machine conforms with

all current safety requirements.

Improper use can, however, lead to

personal injury and damage toproperty.

To avoid the risk of accidents anddamage to the machine, please

read these instructions carefully

before using it for the first time.

They contain important notes on the

installation, safety, operation andcare of the machine.

Keep these instructions in a safe

place and pass them on to any

future owner.

Correct application

~This coffee machine is not designed

for commercial use. It is intended foruse in domestic households and insimilar working and residentialenvironments such as:

Shops

Offices and showrooms

and by residents in establishmentssuch as:

Hostels and guest houses.

Should it be used in suchenvironments, it must be used as adomestic appliance and only for thepreparation of (a maximum of 20 cupsa day of) espresso, cappuccino, latte

macchiato etc.The coffee machine is not intended foroutdoor use.

Any other usage is not supported bythe manufacturer and could bedangerous. Miele cannot be held liablefor damage resulting from incorrect or

improper use or operation.

~ This coffee machine is not intendedfor use by people with reducedphysical, sensory or mentalcapabilities, or lack of experience orknowledge, unless they are supervisedwhilst using it or have been shown howto use it correctly by a person

responsible for their safety.

Safety with children

Caution. Children's skin is very

sensitive and reacts to hot

temperatures. Danger of burning or

scalding.

~ Install the coffee machine where it isout of the reach of children.

~ Keep children away from themachine at all times. It is not a toy! Toavoid the risk of injury do not allowchildren to play with it or its controls.Supervise children whilst you are usingit.

~ Older children may only use thecoffee machine without supervisionwhen its operation has been clearlyexplained to them and they are able touse it safely, recognising the dangersof misuse.

~ Remember that coffee and espressoare not suitable drinks for children.

Warning and Safety instructions

10


11/76

Technical safety

~ Before setting up the machine,check it for any externally visible

damage. Never use a damagedmachine. Danger of injury.

~ To avoid the risk of damage to themachine, make sure that the rating onthe data plate corresponds to thevoltage and frequency of the householdsupply, before connecting the machineto the mains supply. Consult a qualified

electrician if in any doubt.~ The electrical safety of this machinecan only be guaranteed if correctlyearthed. It is most important that thisbasic safety requirement is observedand regularly tested and where there isany doubt the household wiring systemshould be inspected by a qualifiedelectrician.The manufacturer cannot be held liablefor the consequences of an inadequateearthing system (e.g. electric shock).

~ The machine must only be operatedwhen built in, to ensure that allelectrical components are shielded.Ensure power is not supplied to themachine until after installation, repair

work or maintenance work has beencarried out.

~ Do not connect the machine to themains electricity supply by amulti-socket adapter or an extensionlead.These do not guarantee the requiredsafety of the machine (e.g. danger of

overheating).

~ The second electrical connectionsocket on the back of the CVA 5060coffee machine may only be used for

connecting a Miele EGW 4000-14, EGW4000-29 or 5000-14 plate warmer.Connecting any other appliance woulddamage the machine.

~ If the appliance is installed behind akitchen furniture door, it must not beused with the door closed. Do not closethe furniture door while the coffeemachine is in use.

~ The coffee machine must not beused in a non-stationary location (e.g.

on a ship).~ Installation work and repairs mayonly be carried out by suitably qualifiedand competent persons in strictaccordance with current local andnational safety regulations. Repairs andother work by unqualified personscould be dangerous and themanufacturer will not be held liable.

~While the machine is underguarantee, repairs should only beundertaken by a service technicianauthorised by the manufacturer.Otherwise the guarantee will beinvalidated.

~ Faulty components must only be

replaced by genuine Miele originalspare parts. The manufacturer can onlyguarantee the safety of the appliancewhen Miele replacement parts areused.


11


12/76

~ The machine is only completelyisolated from the electricity supplywhen:

the mains fuse is disconnected, the screw-out fuse is removed (in

countries where this is applicable),

it has been switched off at the wallsocket and the plug has beenwithdrawn.

~ Never open the outer casing of themachine. Tampering with electricalconnections or components andmechanical parts is highly dangerousto the user and can cause operationalfaults or electric shock.

~ If the coffee machine is to be built inabove another appliance, there mustbe a full-width, closed shelf betweenthem (except when it is combined with

a Miele built-in plate warming drawer).

~ In areas which may be subject toinfestation by cockroaches or othervermin, pay particular attention tokeeping the machine and itssurroundings in a clean condition at alltimes. Any damage which may becaused by cockroaches or other vermin

will not be covered by the guarantee.

Correct use

Caution. Danger of burning. The

liquids dispensed are very hot.

Never look directly at the lighting oruse optical instruments to look at it.

~ The water pipework and milkpipework must be rinsed through andthe machine and stainless steel milkflask cleaned thoroughly before the firstdrink is prepared.

~ Only cold, fresh tap water should beused to fill the water container. Warm orhot water or other liquids could damagethe machine. Change the water everyday to prevent a build-up of bacteria.

~ Do not on any account use mineralwater. Mineral water will cause seriouslimescale deposits to build up in your

machine and damage it.~ Do not use water from a reverseosmosis unit. This would damage themachine.

~ Never put anything other thanroasted espresso/coffee beans in thecoffee bean container. It must never befilled with ground coffee as this could

damage the grinder.

~ The ground coffee chute must neverbe filled with anything other thanground coffee or brew unit cleaningtablets. Otherwise the machine will bedamaged.

~ Do not use milk with additives.Sugar additives would stick to the milk

pipework and damage the machine.


12


13/76

~ Do not use coffee beans which havebeen treated with anything containingcaramel, any kind of sugar or any othersubstances. Do not put drinks

containing sugar, or instant coffee inthe machine.

~ Never place a drink with ignitedalcohol under the central spout of thecoffee machine. The flames couldignite plastic components and causefire damage.

~Hot water and steam could cause

scalding. Be very careful when usingthese functions. Make sure you do notcome into contact with steam or hotwater. The machine must not be usedfor cleaning objects.

~ Do not use a steam cleaner to cleanthis machine. Pressurised steam couldreach the electrical components and

cause a short circuit.

~ Clean the machine every day toprevent a build-up of bacteria. All partsexcept for the coffee bean container,the stainless steel milk flask and lid,and the cover of the central spout aredishwasher safe.

~ The machine should be descaledregularly, depending on the hardnessof the water, with the descaling tabletssupplied. The harder the water, themore often the machine must bedescaled. The manufacturer cannot beheld liable for damage arising frominsufficient descaling.

~ Only use the descaling tabletssupplied by Miele and follow theinstructions on the packet carefully.

Use the exact proportionsrecommended. Otherwise the machinewill be damaged.

~ Depending on the natural oil contentof the coffee used, the brew unit couldbecome blocked. It is importanttherefore to clean the brew unit with acleaning tablet after approx. 200coffees. (A reminder will appear in thedisplay),

~ Used coffee grounds should be putwith the organic rubbish or on thecompost heap, but not emptied downthe sink, as they could block it.

~ Never swing from or hang anythingon the door when it is open as thiscould damage the machine.

~ The machine is designed to be usedin areas with an ambient temperature of

+15 C to +60 C. Please do not use itanywhere with an ambient temperatureoutside this range.

The manufacturer cannot be held

liable for damage caused by

non-compliance with these Warning

and Safety instructions.


13


14/76

The following notes should help you getto know your coffee machine beforestarting to use it.

Controls

This machine has sensor controls whichreact to touch. To operate the machine,you only need to touch the relevantsensor. There are five sensors:

s On/Off sensor: For switching themachine on or off

< > Left/right arrows:For scrolling through the variousprogramme options

OK sensor: For confirming theselection of a programme optionand for saving a setting

- Hot water sensor

Display

Espresso

q r H I J L n m CThe following symbols come up in thedisplay in the main menu:

qEspresso

r Coffee

H Cappuccino

I Latte Macchiato

J Hot milk

L Milk froth

n User profile for up to 9 differentusers

G Maintenance programme for milkpipework, brew unit, descaling,rinsing

C Settings: Customising yourmachine^ The arrow sensors are used to select

a programme option in the display.Touch the OK sensor when the optionyou want appears highlighted in thedisplay.

Before using for the first timeThe machine must be correctly

installed and connected (see

"Electrical connection" and

"Installation") before it is used for the

first time. It must then be cleaned(see "Cleaning and care").

Remove any protective foil from the

front of the machine.

Switching on

^ Touch the On/Off sensor s to switchon the machine.

When the machine is switched on forthe first few times with the masterswitch, a welcome screen and some

other messages will appear briefly. Thewelcome screen will be displayed eachtime the machine is switched on until 5drinks have been prepared.

MeleWillkommen

Using the coffee machine - first steps

14


15/76

When you use the machine for the veryfirst time, you will be prompted toselect a language.

^ Use the right or left arrow until thelanguage you want appears in thedisplay.

^ Touch the OK sensor.The language you have chosen isnow set.

The request to set the clock format willthen appear.

^ Use the arrows to select the clockformat you want (12 h or 24 h), andthen touch the OK sensor.

^ Enter the time of day: First set thehour with the arrow sensors and thentouch the OK sensor. Then set theminutes in the same way.

^ Now decide when you want the timeof day to be displayed, and press theOK sensor.

"On": The display will always showthe time of day (even when themachine is switched off).

"On for 60 seconds": The displaywill show the time for 60 seconds,

and then go dark after the machineis switched off.

"Do not display": The display willonly show the time of day when themachine is switched on, and will godark as soon as it is switched off.

^ Press the OK sensor to confirm thatyour machine is communication

enabled.

If everything has been enteredcorrectly, Set up successful willappear in the display.

^ Confirm this message by touchingthe OK sensor.

To get the best out of yourcoffee machine and to set itup for your specific

requirements, please continue to workthrough these operating instructions.

Switching off

^ Touch the On/Off sensor s to switchoff the machine.

If automatic rinsing is switched on,providing that coffee or a milk drink

has actually been dispensed from

machine, the rinsing process will

begin. After this the machine will

switch off automatically.

Using the coffee machine - first steps

15


16/76

The coffee machine must be

cleaned thoroughly (see "Cleaning

and care") before you fill it with water

and coffee beans.It is vital that you programme in

the water hardness level of your

water (see "Settings: Customisingyour machine - Setting the water

hardness").

Filling the water container

The quality of the water playsan important part in theoverall quality of the coffee.

The water container should therefore beemptied and filled with fresh tap waterevery day.

Hot water and other liquids could

damage the machine. Only use

cold, clean tap water and fill the

machine every day. Do not on any

account use mineral water. Mineral

water will cause serious limescale

deposits to build up in your machineand damage it.

^ Open the machine door.

^ Pull the water container forwards toremove it.

^ Remove the lid, and fill the water

container with cold, clean tap waterup to the "Max." mark.

A valve at the front of the watercontainer will ensure that watercannot escape.

^ Put the lid back on and replace thecontainer in the machine, pushing it

right to the back until it clicks intoposition.

The water container must click into

position and sit in the machine

correctly to ensure the valve is

sealed. If you do not hear it click into

position or the water container

protrudes slightly or does not sit flat

on the floor, check whether thesurface that the water container sits

on is dirty and clean it if necessary.

Filling the water and coffee bean containers

16


17/76

Filling the coffee beancontainer

Only put roasted espresso or coffeebeans in the container. Anything

else, including ground coffee, will

damage the grinder.

Do not use coffee beans which havebeen treated with caramel, sugar or

other substances. Do not put drinks

containing sugar, or instant coffee in

the machine. Sugar will damage the

machine.

^ Pull out the coffee bean container.

^ Push back the lid and fill thecontainer with roasted coffee beans.

^ Slide the lid back into place,

^ push the coffee bean container backinto the machine and close themachine door.

Filling the water and coffee bean containers

17


18/76

Important: the water piping must be

rinsed through every day and the

machine cleaned thoroughly before

the first drink of the day is prepared.This will take place automatically if

the Rinsing programme option has

been set to "On" and the machine iscold. Hot water will run out of the

central spout into the drip tray once

the machine has heated up.

If the Rinsing programme option has

been set to "Off", select "Rinsing" inthe display to rinse out the system

(see "Cleaning and care").

Switching on

^ Touch the On/Off sensor s.

The following message will thenappear:

Heating phase

If the automatic Rinsing programmeoption has been set to "On" (factorydefault setting), the following willappear after the machine has heatedup:

Rinsing

Water will run out of the central spout.

The main menu will then appear in thedisplay:

Espresso

q r H I J L n m C

Pre-warming cups

The cups should always bepre-warmed to allow the flavour to

develop and be retained. The aroma ofespresso does not react well to cold.The smaller the volume ofcoffee/espresso and the thicker thecup, the more important it is topre-warm the cup. Use a plate warmingdrawer if you have one. If not, you canwarm them as follows:

^ Place the cup to be warmed underthe hot water spout.

^ Touch the Hot water sensor.

^ Run a little hot water into the cup towarm it.

^ Touch the OK sensor to stop the flowof water.

^ Leave the cup for about a minuteuntil it is warm, then pour the wateraway.

Making drinks

18


19/76

Adjusting the height of thecentral spout

The height of the central spout can be

adjusted to suit the height of the cup sothat the drink will not cool down asquickly as it would if the spout werefurther away from the cup. The cremawill also be a better quality if the coffeedoes not have so far to go!

^ Slowly pull the central spoutdownwards.

Preparing espresso and coffeefrom freshly ground beans

You can programme the sizeof portion dispensed forespresso and coffee

according to taste (see "Programmingthe amount: setting the portion sizes").

Espresso, coffee, double espresso anddouble coffee are all dispensed in thesame way:

^ Place a cup under the central spout.

The coffee is always dispensedsimultaneously from both spouts.

Espresso

q r H I J L n m C^ Select the drink you want using the

arrow sensors, and touch the OKsensor once.

The machine will now grind the coffeebeans, pre-brew the ground coffee (ifthe "Pre-brewing" option has been setto "On") and the coffee will then bedispensed from the coffee spouts.

Do not open the machine door

during the brewing process. This will

damage the machine.

To ensure that any coffee residuesfrom the factory testing process are

removed from the brewing system,

please throw away the first two

cups of coffee.

Making drinks

19


20/76

Double portion

If you want to dispense a doubleportion of coffee or espresso or to

dispense two portions at the same time:^ touch the OK sensor twice whilst

"2 portions?" is in the display.

The two portions will be dispensed oneafter the other.

^ To prepare two cups at the same

time, place one cup under each jet.

Cancelling preparation

^ Touch the OK sensor when "Stop" isshowing in the display.

Preparation will be halted.

Making espresso and coffeeusing ready ground coffee

Adding ground coffee

If you want to make espresso or coffeeusing ready ground coffee, you canadd ground coffee to the speciallydesigned coffee chute.

^ Pull the cover for the coffee chuteright out of the machine and open upthe lid (a) to the chute.

^ Use the scoop supplied and placeone level scoop of ground coffee intothe coffee chute (b). Close the lid.

Push the cover into the machine andclose the machine door.

Make the coffee?YesNo

^ Use the arrow sensor to highlight"Yes".

The display will change to the mainmenu and you can select the drink youwant.

Making drinks

20


21/76

If you have not added anyground coffee, you must

select "No". Otherwise themachine will assume that there is

ground coffee in the chute, and onlywater will be dispensed the next timecoffee is made!

To make a drink

^ Place a cup under the central spout.

^ Touch the OK sensor.

The machine will prepare espresso orcoffee, which will then be dispensedfrom the central spouts.

Do not open the machine doorduring the brewing process. This will

damage the machine.

At the end of the process, the coffee

machine will revert automatically to

making coffee with coffee beans.

To cancel preparation


Preparation will be halted.

Only one portion can be prepared at

a time when using ready groundcoffee. This is because the machine

will use all the ground coffee which

has been added to the chute to

prepare one coffee.

Drinks with milk


The stainless steel milk flask is vacuuminsulated to keep the milk cold for aperiod of time. With an ambienttemperature of about 20C, milk at 6Ccan be stored for 11-12 hours andremain under 13C. (Milk that is warmerthan 13C should not be used becauseit will not make good milk froth.) Milkcannot be stored for as long as 11-12

hours if there is a warming drawerunderneath the coffee machine.

Do not fill the stainless steel milk

flask to the rim. You need to leave a

gap of at least 2 -3 cm below therim.

It is important to keep the top of theflask and the seals clean (whilst

filling it and carrying it). Any soiling

can lead to a malfunction of the flask

in the machine.

It is important to pre-heatthe cup with hot waterbefore making your drink.

Making drinks

21


22/76

To make drinks with milk,

^ place the lid on the stainless steelmilk flask by twisting it anticlockwiseuntil it locks into place.

^ Open the machine door and hang themilk flask in the machine asillustrated, ensuring that the milkpipework is correctly engaged.

^ Then close the machine door.

Cappuccino, latte macchiato, hot

milk, milk froth

^ Place a suitable cup or glass under

both jets.For best results with lattemacchiato, the glass shouldbe placed beneath the jets

such that the espresso flows into thecentre of the milk froth.

Cappuccino

q r H I J L n m C^ Touch the right arrow sensor until

symbol for the drink you want ishighlighted and then touch the OKsensor once.

^ Touch the OK sensor again to stopdispensing.

You can then specify the proportionsof coffee, milk froth and hot milk

required for the drink (see

"Programming the amount: setting

the portion sizes").

Making drinks

22


23/76

User profile drinks

The User profile function is used toselect the quantity of water and milk for

your drink, as well as the fineness of theground, temperature and pre-brewingto suit your taste and that of yourguests (see "Setting up user profiles").

If you have set the machine up for aspecific user profile you must firstselect the user profile required andthen the type of drink.

User profile

q r H I J L n m C^ Touch the right arrow to highlight the

User profile symbol and then touchthe OK sensor.

^ Select "Select" with the arrow sensors

and touch the OK sensor.^ Select the user profile you want with

one of the arrow sensors and touchthe OK sensor.

A large user profile symbol nwill now appear in thedisplay to show that a user

profile has been selected.

This function operates in the same

way as a standard profile.

After use

Before switching the machine off forany length of time, the pipework, brew

system, spouts and milk pipework needto be cleaned (see "Cleaning and care:"Rinse the system" and "Clean the milkpipework").

Making drinks

23


24/76

A good espresso or coffee with a thick,even crema depends not only on thequality, pressure and temperature ofthe water and the quality of the coffee

beans, but also on the quantity ofbeans and how finely they are ground.

The crema should have an evennut-brown colour with dark stripesrunning through it.

You can set the amount of coffee beansto be ground in the main menu (see"Settings: Customising your machine -Setting the amount of coffee").

Always adjust the amount of beans

to be ground one stage at a time

only and then let the machine grind

this quantity before adjusting the

amount again. Otherwise the

machine will be damaged.

There are various ways to tell whetherthe coffee grinder is set correctly:

Espresso or coffee flows into the cup

too quickly

The beans have been ground toocoarsely and the pressure is notsufficient. Set the grinder on a finer

setting.

Espresso or coffee only trickles into

the cup

The beans have been ground too finelyand the coffee will be bitter. Set thegrinder on a coarser setting.

The crema is evenly coloured but

pale

The beans have been ground too

coarsely. Set the grinder on a finersetting.

The crema is very dark brown on oneside, graduating almost to white on

the other

The beans have been ground too finely.Set the grinder on a coarser setting.

To alter the grinder setting

^ Push the slide control one setting tothe left (for finer grinding) or onesetting to the right (for coarsergrinding).

You should be able to feel the notcheswhen moving the slide control.

^ If the slide control refuses to move,close the machine and dispense acup of espresso coffee.

Then try the slide control again.

Setting the coffee grinder

24


25/76

It is easy to customise your machine tosuit your exact requirements.

Settings menu

To select the various programmeoptions:

Settings Fq r H I J L n m C^ Touch the right arrow sensor until

"Settings" appears in the display, andthen touch the OK sensor.

^ Touch one of the arrow sensors untilthe option you want is highlighted.

^ Then touch the OK sensor to selectthe highlighted option.

The option that is currently active on themachine will have a tick next to it.

Possible setting options

LanguageF: 22 different languagesare available to choose from

Time of day: You can set either a 24hour or 12 hour clock, and choose tohave the Time of day display on or off

Timer: Here, you can set or activate theTimer. The following options areavailable in the "Set" menu:

Switch on at: The machine can beset to switch on at a specific time ofday.

Switch off after: The machine canbe set to switch off after a pre-settime. A time of between 15 minutesto 9 hours can be set.

Switch off at: The machine can be

set to switch off at a specific time ofday.

Coffee jug: 3 to 8 cups

Programming the amount: Espresso,coffee, cappuccino, latte macchiato,hot milk, milk froth and hot water (see"Programming the amount: setting theportion sizes").

Amount of coffee: You can setdifferent amounts of coffee forespresso, coffee, cappuccino and lattemacchiato.

Pre-brewing: Long, Normal, Without

Temperature: The temperature forespresso, coffee, cappuccino, latte

macchiato and hot water can be setfrom minimum to maximum.

Automatic rinsing: On, Off

Steam system: On, Off

Lighting: Brightness

Info: No. of drinks, Portions untildescaling

Safety: System lock (On, Off)

Settings: customising your machine

25


26/76

Water hardness: Soft 1, Medium 2,Hard 3, Very hard 4

Display: Contrast, Brightness

Volume: Buzzer tones, Keypad tone

Plate warmer (CVA 5060 only): Auto-matic, On, Off

Showroom prog.: Demo programme,Off

Factory default: All settings can bereset to the factory default and user

profiles deleted

To return to the previous option in

the menu, select "Back"A".Further details about the different

options can be found in the pagesthat follow.

Selecting a language

If you want to change the languageused in the display, use the Settings

menu and follow the flag symbol.^ Select "Settings F" from the main

menu and touch the OK sensor.

SettingsLanguage FTime of day


^ Touch one of the arrow sensors untilthe language you want is highlighted.


The setting is saved automatically andthe display will go back to the previousscreen.

All display texts will now appear in the

language you have just selected.

If you select the wrong language by

mistake, find the "Language" option

via the flag symbol F again.


26


27/76

Setting the time of day

^ Select "Settings F" from the mainmenu and touch the OK sensor.

SettingsTime of dayTimer

^ Touch the right arrow sensor until"Time of day" is highlighted and touchthe OK sensor.

There are three options:

Display

The Time of day display can beswitched on or off.

^ Use the arrow sensors to select"Display".

You can now choose one of threeoptions:

"On": The display will always showthe time of day (even when themachine is switched off).

"On for 60 seconds": If the machineis switched off, the display will showthe time for 60 seconds, and then godark.

"Do not display": The display willonly show the time of day when themachine is switched on, and will godark as soon as it is switched off.

^ Once you have selected the displayformat you require, touch OK.

Clock format

^ Use the arrow sensors to select"Clock format".

^ Use the right arrow to select a 24 h or12 h clock.

^ Touch the OK sensor when the optionyou want is highlighted.

The clock format you have chosen willbe saved.

Setting the time of day^ Use the arrow sensors to select "Set".

^ First set the hour with one of thearrow sensors. Touch the OK sensor.

^ Then use the arrow sensors to set theminutes. Touch the OK sensor.

The time of day is now saved.

You can also set the time ofday and alter the displayoptions when the coffee

machine is switched off.

To do this:

^ Touch the OK sensor whilst themachine is off.

^ Select "Time of day" and touch theOK sensor.

Now select "Display" or "Set" and alteras required.

^ Touch the OK sensor to save thesetting.


27


28/76

Setting the timer


SettingsTimerCoffee jug

^ Touch the right arrow sensor until"Timer" is highlighted and touch theOK sensor.

^ Select "Set" with the arrow sensors

and touch the OK sensor.There are three options:

Switch on at:

You can choose a time for the coffeemachine to switch on automatically,e.g. in the morning for breakfast.

^ Select "Switch on at" with the arrowsensors and touch the OK sensor.



If you activate the Timer, the coffeemachine will switch on every day at the

time you have set (see "Activate")

If Automatic rinsing is set to "On", the

machine will automatically carry out

a brief rinse when it switches itselfon.

If the System lock is activated, the

machine will not switch itself on at

the pre-set time.

If the machine has switched itself on

automatically 3 times and no drinks

or hot water have been dispensed,the machine will not switch itself onagain automatically. The

programmed times will, however,

remain in memory and will be

reactivated after manually switching

the machine on again. This prevents

the machine switching itself onunnecessarily, for example whilst

you are away on holiday, and youhave not cancelled the automatic

switching on procedure.

Switch off after:

To save energy, the machine can beset to switch off automatically byselecting the "Switch off after" option. A

time of between 15 minutes to 9 hourscan be set. This time is measured fromthe last time a drink was dispensed.

^ Select "Switch off after" with the arrowsensors and touch the OK sensor.

For example, 1:00 means that themachine will switch off after 1 hour.


28


29/76


^ Then use the arrow sensors to set the

minutes. Touch the OK sensor.The machine will now switch off afterthe time you have set.

If Automatic rinsing is set to "On"

and the machine has been used for

making drinks, it will automaticallycarry out a brief rinse before it

switches itself off.

Switch off at:

If you always use your machine at aparticular time of the day you can set itto switch off automatically at a specifictime.

^ Select "Switch off at" with the arrow

sensors and touch the OK sensor.^ First set the hour with one of the

arrow sensors. Touch the OK sensor.


If you activate the Timer, the coffeemachine will switch off every day at thetime you have set (see "Activate").

If Automatic rinsing is set to "On"

and the machine has been used for

making drinks, it will automaticallycarry out a brief rinse before it

switches itself off.

Activate

^ Select "Activate" with the arrowsensors and touch the OK sensor.

The "Switch on at" and "Switch off at"options will show in the display.

Activate

8 Switch on at8 Switch off at

^ Select the option required with one ofthe arrow sensors.

Touching the OK sensor activates theoption (ticked box) or deactivates (notick).

^ Use one of the arrow sensors toselect "Accept" and then touch theOK sensor.

^ Now use one of the arrow sensors toselect "Back

A" and touch the OK

sensor.


29


30/76

Coffee jug (making severalcups one after the other)

This function can be used to make up

to 8 cups of coffee automatically oneafter the other (max. 1 l).


SettingsCoffee jugProg. the amount

^ Touch the right arrow sensor until"Coffee jug" is highlighted, and touchthe OK sensor.

^ Select the number of cups you wishto make (3 to 8), and confirm withOK.

^ Place a coffee jug of a suitable sizeunder the central spout, and follow

the directions in the display.

The coffee for each cup is individuallyground, brewed and poured. Eachstage of the process is shown in thedisplay. You can cancel the process atany stage by touching the OK sensor("Stop").

^ When Programme finished shows in

the display, confirm with OK.

Setting the amount of coffee

Both the flavour and the crema on thecoffee depend on the quantity of

ground coffee used.

6 to 14 grams of coffee beans are usedper cup, depending on the type ofcoffee. The greater the quantity, thestronger the espresso, coffee,cappuccino, latte macchiato orcappuccino.

The quality of the crema is also affected

by the quantity:

If the crema is evenly coloured butpale, it could mean that too littlecoffee is being used.

If the crema is very dark brown onone side, graduating almost to whiteon the other, it could mean that toomuch coffee is being used.

You can set differentamounts of coffee beans tobe ground for espresso,

coffee, cappuccino and lattemacchiato.


SettingsAmount of coffee

Pre-brewing

^ Touch the right arrow sensor until"Amount of coffee" is highlighted andtouch the OK sensor.


30


31/76

^ Use the arrow sensor to select thedrink that you wish to set the amountof coffee for and then touch the OKsensor.

^ Use the arrow sensor to set theamount to "more" or "less".


Setting Pre-brewing

When the Pre-brewing function is

switched on, the freshly ground coffeeis first moistened with a little hot water.Then the remaining water is forcedthrough the moistened coffee at highpressure. This will make the aroma ofthe coffee considerably more intensive.

Without pre-brewing, hot water isforced straight away at high pressure

through the ground coffee.

You can select a normal or extra longPre-brewing, or deselect Pre-brewingaltogether. The machine is deliveredwith Pre-brewing set at Off (=Without).


SettingsPre-brewingTemperature

^ Touch the right arrow sensor until"Pre-brewing" is highlighted andtouch the OK sensor.

^ Use the arrow sensors to highlight

the Pre-brewing option.^ Touch the OK sensor to save the

setting.

Setting the temperature

Different temperature ranges can beselected to take account of making

coffee at different altitudes. If themachine is located above 2000 metersabove sea level the temperatures needto be set lower due to the change inpressure.There is a choice of five temperatureranges for each type of coffee, andthree for hot water.

Not all types of coffee canwithstand a high temperature.Certain types are too delicate

and the crema on top would not be sogood.


Settings

TemperatureAutomatic rinsing

^ Touch the right arrow sensor until"Temperature" is highlighted, andthen touch the OK sensor.

^ Use the arrow sensors to highlightthe drink for which you wish to set thetemperature, and then touch the OK

sensor.

^ Use the arrow sensors to highlightthe temperature option.



31


32/76

Setting Automatic rinsing

To remove any coffee grounds andresidual milk from the system, the water

piping must be rinsed through beforethe first drink of the day is prepared. IfAutomatic rinsing is selected, the rinsecycle will take place automaticallywhilst the machine is still cold when themachine is switched on. This will alsopre-heat the system because hot wateris used for the rinse process. Amessage will appear in the display to

let you know what is happening. Themachine will also run an automatic rinsebefore it switches off, if it has beenused to prepare a drink.

The machine is delivered with theAutomatic rinsing option set to "On".

To prevent water fromrunning into the drip tray,always place an empty cup

or the small cleaning container underthe central spout before making the firstdrink.


Settings

Automatic rinsingSteam system

^ Touch the right arrow sensor until"Automatic rinsing" is highlighted andtouch the OK sensor.

^ Touch one of the arrow sensors toselect "On" or "Off" and touch the OKsensor.

It is a good idea to set thisoption to "On" so that therinse process cannot beforgotten.

Setting the Steam system

The machine has two heating systems.The Steam system enables milk froth or

hot milk, and coffee or espresso to bemade at the same time. To saveenergy, the Steam system can beswitched off if steam is not required allthe time.

If this option is switched off, milkfroth and hot milk can still be made;

however the machine must be

heated up first.The Steam heating system remains

active as long as the machine is still

on.


Settings

Steam systemLighting

^ Touch the right arrow sensor until"Steam system" is highlighted, andthen touch the OK sensor.

^ Touch one of the arrow sensors toselect "On" or "Off", and then touchthe OK sensor.


32


33/76

Lighting: Setting thebrightness

You can set how bright the lighting

should be on the machine:

^ Select "Settings F" from the mainmenu, and then touch the OK sensor.

SettingsLightingInfo

^ Touch the right arrow sensor until

"Lighting" is highlighted, and thentouch the OK sensor.

^ Select "Brightness", and then touchthe OK sensor.

^ Touch one of the arrow sensors toselect a lighter or darker setting, andthen touch the OK sensor.

To switch the lighting off:^ Touch the left arrow sensor until

none of the small white bars isshowing.

Lighting: Setting the switch-offtime

The machine lights up when switched

on. It switches off automatically after15 minutes of inactivity to save energy.

The lighting can be set to remain onafter the machine is switched off, andthen to go out automatically after aspecified time if the machine is notused.This duration can be set to between

15 minutes and 6 hours:^ Switch the machine off.


^ Select "Lighting" and touch the OK

sensor.

^ Select "Switch off after" and touch theOK sensor.

^ Select the switch-off time you wantwith the arrow sensors and touch theOK sensor.

^ Select "Brightness", and touch the OK

sensor.^ Touch one of the arrow sensors to

select a lighter or darker setting, andthen touch the OK sensor to save thesetting (factory default setting: Off).

^ Touch "BackA" twice to leave themenu.

The lighting will switch off automaticallyafter the duration set.

If you do not want the coffee machineto be lit up after it is switched off(factory default setting):


^ Select "Lighting" and touch the OK

sensor.

^ Select "Brightness" and touch the OKsensor.

^ Touch the left arrow sensor untilnone of the small white bars isshowing.

^ Touch "BackA" twice to leave themenu.


33


34/76

Info (showing the number ofdrinks)

The "Info" option enables you to check

how many drinks the machine hasalready dispensed or how many youcan still dispense before it has to bedescaled.


Settings

InfoSafety

^ Touch the right arrow sensor until"Info" is highlighted and touch the OKsensor.

^ Select "No of drinks" or "Portions untildescale" with the arrow sensors andtouch the OK sensor.

With "No of drinks" you can check the"Total number of coffees" or the numberof portions dispensed to date of aparticular type of coffee, milk froth, hotmilk or hot water.

^ Touch the OK sensor to return to theprevious display.

Safety (Activating the Systemlock)

The machine can be locked to ensure

that it is not operated by unsupervisedchildren or persons who areunacquainted with the operatinginstructions.

When the machine is locked, the

"Switch on at" setting of the timer willnot work.

To activate or deactivate the System

lock


SettingsSafety

Water hardness

^ Select "Safety" with the arrow sensorsand touch the OK sensor.

^ Use an arrow sensor to highlight"System lock" and then touch the OKsensor.

^ Select "On" with the arrow sensorsand touch the OK sensor.

The machine will now lock as soon as itis switched off and cannot be switchedon again. If a sensor is touched, amessage and a locked padlockX willappear in the display.

To deactivate the System lock,

proceed as above, but select "Off".


34


35/76

To override the System lock

^ Touch the OK sensor for about3 seconds.

The machine is now temporarilyunlocked and can be used to makedrinks again. It locks itself as soon asthe machine is switched off.

Setting the water hardness

For trouble-free operation of the coffeemachine, and to ensure that the

descaling reminder appears in thedisplay at the appropriate time, it isimportant to set the water hardnesslevel. The water hardness levelindicates how much calcium isdissolved in the water. The higher thecalcium content, the harder the water,and the harder the water, the moreoften the machine will need to bedescaled.

The machine measures the amount ofwater which has been taken in(including the amount required forproducing steam). The amount of waterwhich the machine can use before itneeds to be descaled will depend onthe water hardness level set. Less

water will be used in hard water areasthan in soft water areas.

Your local water authority will be able totell you the hardness of water in yourarea. Alternatively, you can measurethe hardness yourself using theenclosed test strip:

^ Dip the strip in your drinking water forapproximately a second, then shake

off any excess water. The result willbe evident after about a minute.

If the water is harder than

40 d/7.0 mmol/l, limescale will buildup more rapidy than with soft water.

Descaling will need to be carried out

more regularly than stated to

prevent limescale damage to the

machine.

The machine has four programmablelevels:

Soft 1:

Local water hardness level 10-3 d (0-0.6 mmol/l)Water through-flow: approx. 100 lSteam through-flow: approx. 120 min.

Medium 2:

Local water hardness level 14-7 d (0.7-1.3 mmol/l)Water through-flow: approx. 80 lSteam through-flow: approx. 90 min.

Hard 3:Local water hardness level 2

7-14 d (1.3-2.5 mmol/l)Water through-flow: approx. 60 lSteam through-flow: approx. 60 min.


35


36/76

Very hard 4:

Local water hardness levels 3-414-21 d (2.5-3.8 mmol/l) or moreWater through-flow: approx. 40 l

Steam through-flow: approx. 30 min.


SettingsWater hardnessDisplay

^ Use the arrow sensors to highlight

"Water hardness" and then touch theOK sensor.

^ Touch one of the arrow sensors to setthe water hardness, and then touchthe OK sensor.

The water hardness level selected issaved to memory.

Setting the display

You can adjust both the contrast andthe brightness of the display:


SettingsDisplay

Volume

^ Touch the right arrow sensor until"Display" is highlighted and touch theOK sensor.

^ Touch one of the arrow sensors toselect "Contrast" or "Brightness" andtouch the OK sensor.

^ Touch one of the arrow sensors to setthe contrast lower or higher or thebrightness lighter or darker.


Setting the volume (keypadtone, buzzer)

You can choose for a keypad tone tosound each time a sensor is touched.The volume of the tone can also be

adjusted:


SettingsVolume

Plate warmer

^ Touch the right arrow sensor until

"Volume" is highlighted, and thentouch the OK sensor.

^ Touch one of the arrow sensors toselect "Buzzer tones" or "Keypadtone" and touch the OK sensor.

^ Touch one of the arrow sensors to setthe volume quieter or louder.

If you continue towards the left until

none of the small white bars is showing,the tone will be switched off.



36


37/76

Activating the plate warmer

(CVA 5060 only)

You can connect a Miele EGW 4000-14,-29 or an EGW 5000-14 to the coffeemachine using a special connectioncable available as an optionalaccessory from your Miele Dealer or theMiele Spare Parts Department.

Once the plate warmer is connected,you will need to "install" the platewarmer in the "Settings" menu.


SettingsPlate warmerShowroom prog.

^ Touch the right arrow sensor until"Plate warmer" is highlighted and

touch the OK sensor.

There are three options:

Automatic

The plate warmer will switch on and offtogether with the coffee machine. Theplate warmer must be switched on withthe On/Off control.

If you have programmed the coffeemachine to switch on at a specific time,the plate warmer will always switch onapprox. 30 minutes before the coffeemachine is due to switch on so thatyour cups are warmed up ready foryour coffee.

On

You can switch the plate warmer onand off manually whenever you want,

independently of the coffee machine.

Off

The plate warmer will not switch onbecause the coffee machine is notsupplying it with any electricity. Thecoffee machine is delivered with "Off"as the default setting.

To switch the plate warmer on

independently of the coffee machine

You can switch the plate warmer on viathe coffee machine, even without thecoffee machine being switched on.


^ Select "Plate warmer" and touch theOK sensor.

^ Select "Manual - on" and touch theOK sensor.

The plate warmer is now switched on.To switch the plate warmer off again,proceed as above again, but select

"Manual - off" instead of "Manual -on".

If you have forgotten to switch theplate warmer off, it will switch itself

off automatically after a maximum of

9 hours.


37


38/76

Showroom programme

This function enables the machine to beilluminated in a showroom situtation

without the heaters working.

Resetting the factory defaultsettings

The "factory default" setting is used toreset the various settings back to thedefault status.

From here you can select whether toreset all settings back to the default orto delete any user profiles.


SettingsFactory defaultBack #

^ Use an arrow sensor to highlight"Factory default", and then touch theOK sensor.

Various options will then be available:

All settings

This option sets "All settings" back tothe factory default.

^ Select "Reset" under "All settings",and touch the OK sensor.

All settings are then reset to the default.

If you select "Reset" bymistake, switch the coffeemachine off: Resetting to the

factory defaults will not be carried out.

Factory default settings (the coffee

machine is delivered with the

following settings)

Amount of coffee (medium)

Temperatures for coffee and hotwater (medium settings for both)

Pre-brewing (without)

Automatic rinsing and Steam system(both set to "On")

Plate warmer and Showroom prog.(both set to "Off")

Time of day display (On for60 seconds),Clock format (24 h),

Timer - Switch on at (12:00),Timer - Switch off after (1:00),Timer - Switch off at (12:00), (Switchon at and Switch off at are bothdeactivated)

Coffee jug (3 cups)

Lighting: Brightness (medium)

Safety: System lock (Off) Water hardness (Very hard 4)


38


39/76

Display: Contrast (medium),Brightness (maximum)

Volume: Volume of buzzer tones and

keypad tone (maximum setting forboth)

User profile: Revert (when switchedon).

User profiles

You can delete all user profiles exceptfor the standard one under "User

Profiles".

^ Select "Reset" under "User profiles",and touch the OK sensor.

User profiles are then deleted.

If you select "Reset" bymistake, switch the coffeemachine off: Resetting to the

factory defaults will not be carried out.

Miele|home

With Miele|home, the coffee machinebecomes communication-enabled and

can be monitored or operated via a pcor mobile phone. For furtherinformation, contact your nearest Mielesales office.


39


40/76

The flavour of the coffee produceddepends on the type of coffee, howfinely the beans are ground and thequantity of water used. Not all espresso

and coffee cups are the same size. Toensure the machine uses the rightamount of water to suit your taste andyour cups, you can programme theamount to use.

With milky drinks the proportions ofespresso, milk and milk froth areimportant for the taste. These

proportions can be set for cappuccinoand latte macchiato.

You can programme the amount in twoways, either by touching the OK sensorcontinually, or via the "Settings" option.

If a User profile has been activated,

the proportions for this particular

User profile will be set.

If you wish to set the proportions for

all of the User profiles, select the

"Standard" user profile.

Programming the amount ofespresso, coffee, hot milk andmilk froth via the OK sensor

^ Place the appropriate cup for theamount you want to programmeunder the spouts.

^ Select the type of drink you require.

^ Touch the OK sensor until "Prog. theamount" appears in the display.

^ When sufficient liquid has flowed into

the cup touch the OK sensor again."Save" will then appear in the display.

The volumes of water or milkprogrammed in will now be dispensedevery time that particular drink isselected.

Water flow stops automatically when

the maximum amount possible is

reached. The maximum amountpossible for that type of drink will be

saved.

If there is insufficient water or milk in

the water container or milk flask, the

process will be stopped and the

amount will not be saved.

Programming the amount: setting the portion sizes

40


41/76

Programming the proportionsfor cappuccino or lattemacchiato via the OK sensor

^ Place the appropriate cup or glassfor the amount you want toprogramme under the spouts.

^ Select Cappuccino or LatteMacchiato.

^ Touch the OK sensor until the displayshows the options for Cappuccino

(Milk froth, Espresso) or LatteMacchiato (Hot milk, Milk froth,Espresso).

Latte Macchiato

8 Hot milk8 Milk froth

^ Use the arrow sensor to select thecomponent you wish to set the

amount for.

^ Touch the OK sensor to activate atick next the component you haveselected so that you can thenprogramme its amount.

^ Repeat this for all componentsrequired for that drink.

^ Select "Start" with the arrow sensorsand touch the OK sensor.

The machine will now start the processfor making a cappuccino or lattemacchiato.

As soon as the component requiredstarts to flow into the cup or glass"Programme the amount" will appear in

the display.

^ Once sufficient has flowed into thecup or glass and "Save" shows in thedisplay, press the OK sensor to savethe amount.

Each subsequent drink of this type willthen have the same proportions ofcoffee, milk etc.


41


42/76

Programming the amount forhot water via the Hot water

sensor

^ Place the appropriate cup for theamount you want to programmeunder the hot water spout.

^ Touch the Hot water sensor until"Prog. the amount" appears in thedisplay.

^ When sufficient water has flowed into

the cup touch the Hot water sensoragain. "Save" will then appear in thedisplay.

Each subsequent portion of hot waterwill then have the same amount.

Programming the amount via"Settings"


SettingsProg. the amount

Amount of coffee

^ Use the arrow sensors to highlight"Prog. the amount", and then touchthe OK sensor.

^ Use the arrow sensor to select thedrink you wish to set the amount for.

^ Select "Start" and touch the OKsensor.

The procedure is now the same as forprogramming the amount using the OKsensor or the Hot water sensor.


42


43/76

To cater for different tastes andpreferences, you can enter up to 9individual User profiles. For each Userprofile, you can select the following

individual settings:

The amount of water forcoffee-based drinks and hot water

The amount of milk for drinks withmilk

The amount of coffee

The water temperature

Pre-brewing

(See "Programming the amount: settingthe proportions" and "Settings:customising your machine").

User profile

q rH I J L

nm C

^ Touch the right arrow sensor until"User profile" is highlighted, and thentouch the OK sensor.

You can now:

Select User profile from the Userprofiles which are already allocated.

Create User profile, if you want toenter a new User profile.

The following options only appear if youhave already entered a new Userprofile in addition to the Standard Userprofile:

Change User profile, if you want toalter a User profile.

Delete User profile, if you want todelete a User profile.

Revert: You can programme themachine so that it always reverts tothe Standard User profile or so that it

continues to operate using a Userprofile you have set.

Selecting a User profile

^ Select the User profile you want withthe arrow sensors and touch the OKsensor.

Espresso+

George

q r H I J L n m C

To show that a user hasbeen selected, the top line ofthe display will now show a

large symbol for a "user"!

Setting up User profiles

43


44/76

Creating a User profile

^ Use the arrow sensors to highlight"Create", and then touch the OK

sensor.

You can allocate up to 9 User

profiles. If you try to allocate more

than 9 User profiles, "Memory full"

will appear in the display and you

will need to delete one name to

create space.

Letters and numbers will now appear inthe display. Use the arrow sensors toselect the letters and numbers yourequire.

A new word always starts with a capitalletter. The rest of the word willautomatically be in lower case.Hyphens and spaces can be used

between lower case letters.^ Use the arrow sensors to select the

characters you require.

^ Confirm each one with the OKsensor.

The characters you have chosen willappear in the top line of the display.

If you make a mistake, usethe arrow sensors to selectthe bin symbol and touch the

OK sensor. The last character will bedeleted.

Saving an entry

^ When you have finished making yourentry, use the arrow sensors to

highlight the word "OK" and thentouch the OK sensor.

The User profile welcome screen willappear briefly in the display, and thenthe Main menu.

Not saving an entry

^ If you don't wish to save your entry,

use the arrow sensors to highlight theword "BackA" and then touch theOK sensor.

Changing a User profile

Once you have selected the "Change"option and confirmed your selectionwith OK,

^ select the User profile, and touch theOK sensor.

Now proceed as described in "Creatinga User profile".

To delete a letter, select the binsymbol.

To enter new characters, select the

relevant character and confirm withOK.

Save the new name by selecting"OK" in the display and touching theOK sensor.


44


45/76

Deleting a User profile

If you want to delete the User profilecompletely,

^ Select "Delete User profile" using theOK sensor.

^ Use the arrow sensors to select theuser profile you want to delete.


A tick will appear after the user profileand after a short while it will be deleted.

Revert

You can programme the machine sothat it reverts to the Standard Userprofile after you have made each drink,or so that it continues to operate usinga User profile you have set.

To set the profile to be used:^ Select "Revert" with one of the arrow

sensors.

You can now select one of thefollowing:

Manually

The coffee machine will store the user

profile you have selected until youselect another one.

^ Select "Manually" with the arrowsensors and touch the OK sensor.

After each use

The machine will automatically revert tothe Standard User profile each time a

drink is dispensed.

^ Select "After each use" with the arrowsensors and touch the OK sensor.

When switched on

Each time the machine is switched on itwill automatically select the StandardUser profile regardless of which User

profile was set before the machine waslast switched off.

^ Select "When switched on" with thearrow sensors and touch the OKsensor.


45


46/76

Quick guide

Clean the coffee machine every day to prevent a build-up of bacteria.

Recommended frequency What do I have to do?

Each time milk is used to make adrink, if more than one hour haspassed since the last drink wasmade

Rinse milk pipework

Every day(usually at the end of the day,

before the machine is switched off)

Rinse the system (pipework)

Clean the milk pipework (with cleaning agent)

Clean the stainless steel milk flask and lid

Clean the central spout

Clean the water container

Clean the waste container

Clean the drip tray and the drip tray cover

Once a week(or more often if badly soiled)

Clean the central spout connector

Clean the inside of the machine

Clean the small drip tray inside the machine door

Clean the brew unit

Clean the front of the machine (especially straight after

descaling)

Once a month Lubricate the cap on the central spout connector

Approx. every 200 portions Degrease the brew unit (with cleaning tablets)

Depending on the hardness of thewater

Descale the machine

As required Clean milk pipework of any blockagesClean the coffee bean container

Cleaning and care

46


47/76

Always allow the machine to cool

down before cleaning. Please be

aware that the water in the drip tray

will be hot.Danger of scalding.

Do not clean the machine with asteam cleaner as this will damage

the machine.

Do not use cleaners containing

chlorides, acids, soda or scouringagents. These would damage the

surface.

It is important to clean the machineregularly, as the used coffee groundswill soon go mouldy.

All removable parts can be cleaned inthe dishwasher except for:

the brew unit

the coffee bean container

the stainless steel milk flask and lid

the cover to the central spout.

Cleaning parts frequently in adishwasher can cause them to become

discoloured. This is caused by regularcontact with food residues (e.g.tomatoes) in the dishwasher. Thesurface can also become damaged.

Rinse the system

Before switching the machine off forany length of time, the pipework, brew

system and central spout need to becleaned.If you have switched the automaticrinsing function off, you will need torinse the system through manually.Place the smaller of the two containersunder the central spout.

Maintenanceq r H I J L n m C^ Touch the right arrow sensor to

highlight the maintenance symboland touch the OK sensor.

^ Select "Rinse the system" and touchthe OK sensor.


The main menu will reappear in thedisplay after the pipework has beenrinsed. The machine can then beswitched off.

Cleaning and care

47


48/76

Milk pipework

Rinse milk pipework

To prevent milk going off in themachine and the pipework gettingclogged up, it should be rinsed throughafter use. Rinsing is not a substitute forcleaning the pipework through at theend of the day.

Maintenance

q r H I J L n m C^ Touch the right arrow sensor to


^ Select "Rinse milk pipework" andtouch the OK sensor.

^ Select "Start" and touch the OK

sensor.Follow the instructions in the display.

To rinse the pipework in the lid for

the stainless steel milk flask, fill the

larger of the two plastic containers

to the "max." mark with cold water.

Fit the lid from the milk flask to the

container, making sure that it

engages correctly. Hang it in themachine where the stainless steel

milk flask normally sits.

Clean milk pipework

To prevent milk going off in themachine and the pipework getting

clogged up it should be cleaned at theend of each day using the cleaningagent supplied.

^ If the milk pipework in the lid isclogged, use the cleaning brush toclean it under running water.Insert the brush in the pipework andmove it back and forth as far as it will

go until all the milk deposits areremoved.

Maintenance

q r H I J L n m C^ Touch the right arrow sensor to


^ Select "Clean milk pipework" andtouch the OK sensor.


The display will let you know the currentstatus of the machine or what actionneeds to be taken.

^ Follow the instructions step by step.

Cleaning and care

48


49/76

To clean the pipework in the lid forthe stainless steel milk flask, fill the

larger of the two plastic containers

to the "max." mark with lukewarm

water to dissolve the cleaning agent.

Fit the lid from the milk flask to the

container, making sure that it

engages correctly. Hang it in themachine where the stainless steel

milk flask normally sits.

It is important to use the Mielecleaning agent as it has been

developed for this coffee machine. It

is available via the internet at

www.miele-shop.com, or from theMiele Spare Parts Department.

The milk pipework will now be cleaned.The pipework is clean once Prog.

finished appears in the display. Youcan then switch the machine off.

Clean milk pipework of any

blockages

If you are getting steam instead of milk

from the central spout the milkpipework in the machine is probablyblocked up.

^ Take the lid off the central spout. Pullthe jets out of the central spout.(See "Central spout").

^ Open the door.

^ Remove the stainless steel milk flaskand clean it making sure youthoroughly clean the area around thehandle (see "Stainless steel milkflask").

^ Release the cover to the milkpipework by pressing the tabs in on

the left and right hand sides.

Cleaning and care

49


50/76

^ Take the cover off together with themilk pipework. Clean the whole

component in the dishwasher withoutdismantling it.

If there is still residual milk in thepipework after this use the cleaningbrush supplied to remove it. To do sodismantle the cover and the milkpipework as follows:

Do not take the milk pipework out of

its holder. This could cause the

pipes to leak.

^ Press down on the small recess inthe spout's holder (a) and pull theholder forwards and out (b). Loosenthe milk pipework from its guides.

^ Take hold of the second holder bypin (c) and pull it upwards and off.

The hoses can now be cleaned with abrush under running water.

^ Push the brush into both milk pipesfrom below. Move the brush in andout of the pipes as far as it will gountil there are no milk residues left inthem.

Re-assemble the milk pipework asfollows:

^ Fit the holder with the plug into thecover as shown. Make sure that theholder fits correctly on the cover.

Cleaning and care

50


51/76

^ Now push the milk pipes into theguides (a) and push the spout

holder (b) back on. It should clickinto place.

^ Fit the cover with the milk pipes backinto position behind the machinefront.

^ Re-fit the central spout (see "Centralspout").


The stainless steel milk flask and lid

must be washed by hand using hot

water.

It is important to keep the top of theflask and the seals clean (whilst filling itand carrying it). Any soiling can lead toa malfunction of the flask in themachine.

^ Clean the stainless steel flask with

hot water after use to remove anyresidual milk.

^ Clean the handle under the tap andthen clean it thoroughly with a cleandamp cloth to remove any milkresidues.

^ If the milk pipework in the lid isclogged, use the cleaning brush to

clean it under running water.Insert the brush in the pipework andmove it back and forth as far as it willgo until all the milk deposits areremoved.

Cleaning and care

51


52/76

Central spout

^ Pull the central spout down as far asit will go (a), and pull the cover

forwards to remove.

^ Turn the cover around, push theinsert up and out and then clean bothparts thoroughly.

^ Slide the insert back into the coveruntil it clicks into place.

^ Pull the jets out of the central spout.

^ Remove the two rubber stoppers (a)and manually clean these and thejets thoroughly.If required, remove the air intake tube(b). Any blockages can bedislodged by kneading or "blowingthrough" the tube.

Do not use a needle or similar

implement. This would damage the

components.

^Replace the stoppers.

^ After cleaning, push the jets firmlyback into place on the central spout,ensuring they are secure.

^ Replace the cover and then push thecentral spout back up into position.

Cleaning and care

52


53/76

Water container

Empty the water container daily and fillwith fresh, cold tap water just before

use.

When cleaning, make sure that there

is no soiling in the area around the

valve. Otherwise the container will

not sit correctly and this could result

in water leaking from the machine.

^ The water container can be cleaned

in the dishwasher or by hand usinghot water with a little washing-upliquid.Dry thoroughly after cleaning.

^ Clean the surface the water containersits on thoroughly, taking specialcare to clean the channels properly.

Waste container

After a certain period of time a reminderto empty the waste container will

appear in the display. The wastecontainer must be cleaned when thismessage appears. However it is betterto clean the waste container every day

to prevent coffee grounds from turningmouldy.There will probably also be w

Documents

CVA 5060 Coffe Machine